Answer:
whatttttttttttt
Explanation:
the ಠᴥಠಠᴥಠಠᴥಠಠᴥಠಠᴥಠಠᴥಠಠᴥಠಠᴥಠ
How 2cos theta ×sin theta is =sin2theta
Answer:
Can you rewrite that sorry
Explanation:
Two spherically symmetric planets with no atmosphere have the same average density, but planet B has twice the radius of planet A. A small satellite of mass mA has period TA when it orbits planet A in a circular orbit that is just above the surface of the planet. A small satellite of mass mB has period TB when it orbits planet B in a circular orbit that is just above the surface of the planet.
A period of a satellite is the time taken by the satellite to travel round a
body.
The comparison between the periods [tex]T_B[/tex], and [tex]T_A[/tex] is [tex]\underline {T_B = \dfrac{\sqrt{2} }{4 } \cdot T_A}[/tex]
Reason:
The period, T, of a satellite is given as follows;
[tex]T = 2 \cdot \pi \cdot \sqrt{\dfrac{r^3}{G \cdot M} }[/tex]
Volume of the planet A = [tex]\dfrac{4}{3} \cdot \pi \cdot r^3[/tex]
Mass of planet A, [tex]m_A[/tex] = [tex]\dfrac{4}{3} \cdot \pi \cdot r^3 \times \rho[/tex]
Volume of the planet B = [tex]\dfrac{4}{3} \cdot \pi \cdot (2 \cdot r)^3 = \dfrac{32}{3} \cdot \pi \cdot r^3[/tex]
Mass of planet B, [tex]m_B[/tex] = [tex]\dfrac{32}{3} \cdot \pi \cdot r^3 \times \rho[/tex]
Period of the satellite on planet A, [tex]T_A[/tex], is given as follows;
[tex]T_A = 2 \cdot \pi \cdot \sqrt{\dfrac{r^3}{G \times \dfrac{4}{3} \cdot \pi \cdot r^3 \times \rho} } = 2 \cdot \pi \cdot \sqrt{\dfrac{1}{G \times \dfrac{4}{3} \cdot \pi \times \rho} }[/tex]
Period of the satellite on planet B, [tex]T_B[/tex], is given as follows;
[tex]T_B = 2 \cdot \pi \cdot \sqrt{\dfrac{r^3}{G \times \dfrac{32}{3} \cdot \pi \cdot r^3 \times \rho} } = 2 \cdot \pi \cdot \sqrt{\dfrac{1}{G \times \dfrac{32}{3} \cdot \pi \times \rho} }[/tex]
Therefore, get;
[tex]\dfrac{T_A}{T_B} = \dfrac{ 2 \cdot \pi \cdot \sqrt{\dfrac{3}{G \times 4 \cdot \pi \times \rho} }}{ 2 \cdot \pi \cdot \sqrt{\dfrac{3}{G \times 32 \cdot \pi \times \rho} }} = \sqrt{\dfrac{32}{4} } = \sqrt{8} = 2 \cdot \sqrt{2}[/tex]
Therefore, [tex]T_A[/tex] = (2·√2)·[tex]T_B[/tex]
[tex]T_B = \dfrac{T_A}{2 \cdot \sqrt{2} } = \dfrac{\sqrt{2} \cdot T_A}{4 }[/tex]
The comparison between [tex]T_A[/tex] and [tex]T_B[/tex] is therefore;
[tex]\underline {T_B = \dfrac{\sqrt{2} }{4 } \cdot T_A}[/tex]Learn more here:
https://brainly.com/question/1448749
You throw a rock up into the air as hard as you can. It stays in the air a total of 6.0 s. What
was the velocity of the rock when you threw it?
Answer:
5.9 x 10Explanation:
Gravity will apply a different amount of force to objects with different mass. The force of gravity can also be called
a. weight.
b. inertia.
c. kilograms.
d. resistance.
e. Mass
Answer:
E.Mass
Explanation:
Since the gravitational force is directly proportional to the mass of both interacting objects, more massive objects will attract each other with a greater gravitational force. So as the mass of either object increases, the force of gravitational attraction between them also increases.
why do the star constellations seem to move across the sky
Answer: These apparent star tracks are in fact not due to the stars moving, but to the rotational motion of the Earth. As the Earth rotates with an axis that is pointed in the direction of the North Star, stars appear to move from east to west in the sky.
Explanation: why do the star constellations seem to move across the sky
Answer:
because the world moves around and around rotating in a circle and circling around the sun so as we move the stars stay the same but to our view it looks like their moving but in reality we are.
Explanation:
10. Unless a light ray comes into contact with a surface or enters a different material, it
travels in a
Answer:
Straight Path
I NEED A 100% ACCURATE ANSWER FOR THIS QUESTION ASAP NO LINKS !!!
What is defined by force per unit area?
1: gravity
2: force
3: temperature
4: pressure
Answer:
4. pressure is defined as force per unit area
Pressure is defined by force per unit area.
WHAT IS PRESSURE:Pressure refers to the force applied to a substance per unit area. Force is measured in Newtons (N) while area is measured in m², hence, the unit of pressure is N/m² also called pascal.Therefore, according to this question, it can be said that pressure is defined by force per unit area
Learn more about pressure at: https://brainly.com/question/356585
David drives and slows to a stop when he sees a stop sign. A graph of his velocity over time is shown below.
Velocity
20-
P6
15+
As:
10+
MY
5+
Time (s)
Col
t
5
10
15
20
MY
Pro
What is his average acceleration from 10 to 20 seconds?
Pro
Answer:
-2.0
Explanation:
Two particles of a gas collide. Why is this considered an elastic collision? (1 point)
O They bounce off each other, conserving momentum only.
O They stick together, conserving momentum.
O They bounce off each other, conserving energy only.
O They bounce off each other, conserving energy and momentum.
They bounce off each other, conserving energy and momentum.
This is considered an elastic collision because they bounce off each other, conserving energy only.
Gas is the state of matter that is made up of particles which freely move about its container and they bounce off each other.
As the particles move over each other they collide without exerting any force in each other. This is known as elastic collision.
Kinetic energy is conserved in elastic collisions which occurs between gas molecules.
While in inelastic collision, momentum is conserved and kinetic energy is not.
Because the gas particles do not stick together as they collide, no force is exerted and kinetic energy is therefore conserved.
Learn more here:
https://brainly.com/question/24478517
how long untill the semester is done
How much heat must be added to 160 g of ice at 0°C to melt the ice completely? The latent heat of fusion of ice is 80 cal/g.
The amount of heat required is
cal
what is the difference between soldering and solder?
Answer:
Soldering is a technique or a process to bond metals with the help of solder. Solder is a metal alloy with a low melting point and is often regarded as the base metal for soldering. The piece or structure that is being bonded together does not get hot enough to melt and this is where solder (base metal) comes into play and creates the connection.
Explanation:
Hope this helps :)
Pls mark brainliest :3
And have an amazing day <3
Does static electricity light our homes? True or false
Answer:
No, false.
Explanation:
You may use it to power a light bulb if you desired. The reason it isn't is because it's inconsistent not predictable.
The static electricity light our homes. This statement is false.
What is static electricity?When two objects are rubbed, they get charged by friction present into it. Object can also be charged by induction.
The charge gets accumulated on them, due to which spark occurs.
This spark cannot light our homes. As, this has very less magnitude and no continuous flow. There is no complete circuit to get the continuous flow of electricity.
Thus, static electricity can't light our homes.
Learn more about static electricity.
https://brainly.com/question/12791045
#SPJ2
- The rocket now has a thruster that malfunctions and is now pushing the rocket in the wrong direction. What is the new net force on the rocket if it is now accelerating at 12mls²
From your previous question
Mass=30kg
Acceleration=12m/s^2
[tex]\\ \sf\longmapsto F=ma[/tex]
[tex]\\ \sf\longmapsto F=30(12)[/tex]
[tex]\\ \sf\longmapsto F=360N[/tex]
Given,
Acceleration = 12 m/s²
According to your previous question you posted,
Mass = 30 KG
Solution:
We know that the formula of force according to the Newton's second law is:
[tex]\longmapsto \sf \red{f = m \times a}[/tex]
[tex]\sf \longmapsto \ 30 \times 12[/tex]
[tex]\sf \longmapsto \: \boxed {\sf \blue3 \red60}[/tex]
Answer:
[tex]\sf \boxed{ \bf \: force = 360\: N}[/tex]
define potential difference as used in electricity
Answer:
Explanation:
Testing answer please do not delete
the diffrence in potential betwen two points that represents the work involved or the energy relesed in the transfe of a unit quantity of electicity from one point to the other
Show your workikkkkkkkk
Answer:
Explanation:
F = ma
Assuming the 20° is angle θ measured to the horizontal
mgsinθ - μmgcosθ = ma
g(sinθ - μcosθ) = a
at constant velocity, a = 0
g(sinθ - μcosθ) = 0
sinθ - μcosθ = 0
sinθ = μcosθ
μ = sinθ/cosθ
μ = tanθ
μ = tan20
μ = 0.3639702342...
μ = 0.36
Sharing thoughts on a peer's story is similar to... a.being a teacher b.listening to a lesson c.editing a story d.a collaborative discussion
Answer:
D
Explanation:
when sharing ideas, you are being collaborative
What particles are considered to be the basic building blocks of elements?
Answer:
Atoms.
Explanation:
The fundamental structure obstructs that make matter are called molecules. What are the various particles found in iotas? (Reply: electrons, protons and neutrons) Where are they found? (Reply: Protons and neutrons are found in the core, and electrons are found in shells around the outside of the core.)
Really hope this helps! :D
Explanation:
The basic components of matter are called atoms. What are the various particles present in an atom?
(Answer: electrons, protons, neutrons) Where are they? (Answer: Protons and neutrons are in the nucleus, and electrons are in the shell around the nucleus.)
ounces is In the apothecary system of measurement, equal to one apothecary pound. a) eight b) 16 c) 12 d) four
Which theory of emotion explains the startle response
Answer:
In the present study, the startle blink reflex is used as a measure of emotion regulation to effective picture stimuli. Based on the aphasic theory of emotion, it is hypothesized that the startle response will be largest in magnitude in the presence of negative emotional stimuli (Varanasi, Spence, & Lang, 1988).
A normal atom is electronically ** (positive/negative/neutral) because the number of ** (protons/neutrons/electrons), each with a positive charge, equals the number of ** (protons/neutrons/electrons), each with a negative charge.
The answers to multiple choice questions are in parentheses
Answer:
(neutral)
(protons)
(electrons)
Explanation:
Electrons have a negative charge (-) while protons have a positive (+) charge.
Atoms will usually be neutral, which means that there will be no charge.
For an atom to have a neutral charge, protons and electrons must "cancel" each other out. For this to happen, you need to have the same amount of each.
Positive will "cancel" out the negative.
HELP HELP!
Which of the following surfaces would have the lowest amount of friction?
a. Glass
b. Sand
c. Wood
d. Ice
Answer:
d. Ice
Explanation:
1. What does the term monecious mean?
Answer:
Monecious is a plant or invertebrate animal having both the male and female reproductive organs in the same individual; hermaphrodite.
What will be the current through a resistance of 50Ω if the applied voltage across the resistance is 117V?
Formulas: V=IR, I=V/R, R=V/I
Note: No need to write the unit of your answer.
2.34 A
Explanation:
[tex]V = IR \Rightarrow I = \dfrac{V}{R} = \dfrac{117\:\text{V}}{50\:Ω} = 2.34\:\text{A}[/tex]
please help me
7. If microsecound = 0.5, how much force must be applied to a spring (spring constant of 0.8 N/m) which is attached to a block of wood (mass = 4.0 kg) in order to just begin to move the block?
Answer:
Explanation:
Your question is quite confusing, particularly the information about microsecond = 0.5.
I'm going to ASSUME that you mean coefficient of static friction μs = 0.5
unfortunately typing a subscript "s" is very difficult and probably leads to such confusion.
I will also ASSUME that the block, and spring, and force vector are all horizontal.
If the force is slowly increased until the block slips, the spring will compress until the force on each end equals the maximum static friction force. As we are not concerned with the compression distance, only the force, we can ignore the spring constant information and simply find the maximum available static friction force.
F = μN
F = μmg
F = 0.5(4.0)(9.8)
F = 19.6 N
Not that it matters, but the spring will have extended or compressed 19.6/0.8 = 24.5 m, which is a very long and very light spring
Given below are the names of some objects and materials: Water, basket ball, orange, sugar, globe, apple and earthen pitcher Group them as Eatables and Non eatables.
hope it helps
Which of the following statement describes a nonpolar molecule
Answer:
?
Explanation:
what are the statements
What is the net force on a cart being pushed with an applied force of 23 N with a frictional force of 23 N?
Answer:
1N
Explanation:
Pretty simple Divide 23 by 23 which gives you 1.
23N ÷ 23N = 1N
Answer:
[tex]\sf \longmapsto \: 1 \: N[/tex]
Explanation:
[tex]\sf \longmapsto \frac{23N}{23N} [/tex]
[tex]\sf \longmapsto1 \: N[/tex]
How are acceleration and velocity related
A: An object with constant velocity also has constant acceleration
B: Acceleration and velocity are not related. C:Acceleration describes how fast the velocity of an object is changing,
D: Acceleration only occurs when the speed of an object changes, but velocity can change if speed or direction changes
Answer:
answer is C
Explanation:
acceleration is rate of changing velocity in a time
Compare and contarst the difference between saturated and unsaturated solutions and supersaturated
Answer:
Unsaturated Solution: Less amount of salt in water, clear solution, no precipitation. Saturated Solution: The maximum amount of salt is dissolved in water, Colour of the solution slightly changes, but no precipitation. Supersaturated Solution: More salt is dissolved in water, Cloudy solution, precipitation is visible