If a gas occupies 30 L at STP, what would be the volume if the temperature was raised to 323. 15K ?

2. To convert miles per hour to meters per second, we need to divide by 2.237.

Thus, 35 miles per hour is equal to (35/2.237) meters per second.

Simplifying, we get:

= 15.646 m/s

3. To convert feet to centimeters, we need to multiply by 30.48.

Thus, 379.7 feet is equal to (379.7 x 30.48) centimeters.

Simplifying, we get:

= 1158.754 centimeters

4. To calculate the number of atoms in 2.35 moles of sulfur, we need to use Avogadro's number, which is 6.022 x 10^23 atoms per mole.

Therefore, the number of atoms in 2.35 moles of sulfur is:

2.35 moles x 6.022 x 10^23 atoms/mole = 1.41 x 10^24 atoms

5. To calculate the number of molecules in 3.45 moles of sucrose, we need to use Avogadro's number, which is 6.022 x 10^23 molecules per mole.

Therefore, the number of molecules in 3.45 moles of sucrose is:

3.45 moles x 6.022 x 10^23 molecules/mole = 2.08 x 10^24 molecules

to know more about Avogadro's number refer here:

https://brainly.com/question/28812626#

#SPJ11

The normal boiling point of the 3.45 mol solution of KBr is 104.7384°C.

The normal boiling point of a 3.45 mol solution of KBr with a density of 1.10 g/mL can be calculated using the formula:

ΔT = Kb * molality

where ΔT is the boiling point elevation, Kb is the molal boiling point elevation constant for water (0.512°C kg/mol), and molality is the number of moles of solute per kilogram of solvent.

First, we need to calculate the mass of the solvent (water) required to dissolve 3.45 mol of KBr. The molar mass of KBr is 119 g/mol, so 3.45 mol of KBr would weigh 409.55 g.

Since the density of the solution is given as 1.10 g/mL, the volume of the solution is:

V = m / ρ = 409.55 g / 1.10 g/mL = 372.32 mL

So, the mass of the water is:

mH2O = V * ρH2O = 372.32 mL * 1 g/mL = 372.32 g

The molality of the solution can be calculated as follows:

molality = moles of solute / mass of solvent (in kg) = 3.45 mol / 0.37232 kg = 9.27 mol/kg

Substituting the values in the formula for boiling point elevation:

ΔT = 0.512°C kg/mol * 9.27 mol/kg = 4.7384°C

The normal boiling point of pure water is 100°C, so the boiling point of the KBr solution would be:

Boiling point = 100°C + ΔT = 100°C + 4.7384°C = 104.7384°C

To know more about boiling point, refer here:

https://brainly.com/question/14771622#

#SPJ11

The compound Ti(NO3)4 dissociates in water as:

Ti(NO3)4 → Ti^4+ + 4 NO3^-

This means that each formula unit of Ti(NO3)4 produces 4 nitrate ions (NO3^-) in solution.

Therefore, the concentration of NO3^- ions in a 0.25 M solution of Ti(NO3)4 is:

0.25 M Ti(NO3)4 × 4 NO3^- ions / 1 Ti(NO3)4 formula unit = 1.00 M NO3^- ions

So, the concentration of NO3^- ions in a 0.25 M solution of Ti(NO3)4 is 1.00 M.

To know more about dissociates refer here

https://brainly.com/question/30983331#

#SPJ11

The correct interpretation is  89.6 L of [tex]NH_{3}[/tex](g) react with 156.8 L of [tex]O_{2}[/tex](g) to produce 89.6 L of [tex]NO_{2}[/tex](g) and 134.4 L of [tex]H_{2} O[/tex](g).

We know that one mole of a gas does occupy 22.4 L. We can now use this to obtain the number of volumes of the gas based on the stoichiometric coefficient that has been given in the problem.

Molar volume of a gas refers to the volume occupied by one mole of a gas at a specific temperature and pressure. This value is useful in many applications of chemistry, such as in stoichiometric calculations and the determination of gas densities.

Using the stoichiometric coefficients we can see that the volume of the gases are;

Ammonia - 89.6 L

Oxygen -  156.8 L

Nitrogen dioxide - 89.6 L

Water -  134.4 L

Learn more about molar volume:https://brainly.com/question/29884686

#SPJ1

3.266 × 10²⁴ compounds in 434g of ammonium nitrate

To determine how many compounds are in 434g of ammonium nitrate, we will follow these steps:
Step 1: Determine the molar mass of ammonium nitrate (NH₄NO₃).
Ammonium nitrate consists of one nitrogen (N) atom, four hydrogen (H) atoms, and three oxygen (O) atoms in its chemical formula. The molar masses of N, H, and O are approximately 14 g/mol, 1 g/mol, and 16 g/mol, respectively.

Molar mass of NH₄NO₃ = 1(N) + 4(H) + 1(N) + 3(O)
= 14 + (4 × 1) + 14 + (3 × 16)
= 14 + 4 + 14 + 48
= 80 g/mol

Step 2: Calculate the number of moles of ammonium nitrate.
To find the number of moles, divide the given mass (434g) by the molar mass (80 g/mol).

Number of moles = 434 g / 80 g/mol
= 5.425 moles

Step 3: Calculate the number of compounds (molecules) in ammonium nitrate.
Use Avogadro's number (6.022 × 10²³ molecules/mol) to find the total number of molecules in 5.425 moles of ammonium nitrate.

Number of compounds = 5.425 moles × (6.022 × 10²³ molecules/mol)
= 3.266 × 10²⁴ molecules

So, there are approximately 3.266 × 10²⁴ compounds in 434g of ammonium nitrate.

To know more about Molar mass :

https://brainly.com/question/20552052

#SPJ11

To solve this problem, we can use the formula:

q = m * c * ΔT

where q is the heat energy absorbed or released, m is the mass of the substance, c is the specific heat capacity of the substance, and ΔT is the change in temperature.

We know that the heat energy released by the iron is 2432 J, the specific heat capacity of iron is 0.448 J/g°C, the initial temperature of the iron is 25.0°C, and the final temperature of the iron is 87.0°C.

The mass of iron that releases 2432 J of energy as its temperature rises from 25.0°C to 87.0°C is 96.2 g.

Substituting the values in the formula, we get:

2432 J = m * 0.448 J/g°C * (87.0°C - 25.0°C)

Simplifying the equation, we get:

m = 2432 J / (0.448 J/g°C * 62.0°C)

m = 96.2 g

Therefore, the mass of iron that releases 2432 J of energy as its temperature rises from 25.0°C to 87.0°C is 96.2 g.

To know more about temperature rise refer here:

https://brainly.com/question/2006890

#SPJ11

When, we perform a reaction with 5. 00 g of MnO₂ and 5. 00 g of H₂SO₄, then, 6.30 g of Mn(SO₄)₂ will be formed. Option, A is correct.

To solve this problem, we need to use stoichiometry to calculate the amount of Mn(SO₄)₂ formed from the given amount of MnO₂ and H₂SO₄.

First, we calculate number of moles of each reactant;

moles of MnO₂ =5.00 g / 86.9368 g/mol

= 0.0574 mol

moles of H₂SO₄ = 5.00 g / 98.0785 g/mol

= 0.0509 mol

From the balanced chemical equation, we can see that 1 mole of MnO₂ reacts with 2 moles of H₂SO₄ to produce 1 mole of Mn(SO₄)₂. Therefore, the limiting reactant is H₂SO₄, since it is present in a smaller amount than what is required to react with all of the MnO₂.

The amount of Mn(SO₄)₂ formed is limited by the amount of H₂SO₄, so we can calculate the amount of Mn(SO₄)₂ formed based on the number of moles of H₂SO₄;

moles of Mn(SO₄)₂ = 0.0509 mol H₂SO₄ × (1 mol Mn(SO₄)₂ / 2 mol H₂SO₄) = 0.0255 mol Mn(SO₄)₂

Finally, we can calculate the mass of Mn(SO₄)₂ formed using its molar mass;

mass of Mn(SO₄)₂ = 0.0255 mol × 247.0632 g/mol

= 6.307 g

Therefore, total 6.30 g of Manganese(II) sulfate will form.

Hence, A. is the correct option.

To know more about Manganese(II) sulfate here

https://brainly.com/question/8695145

#SPJ4

The volume of a 2.00 M solution that contains 3.75 moles of solute can be calculated using the formula V = n/C, where V is the volume of the solution, n is the number of moles of solute, and C is the concentration of the solution in units of M (moles per liter).

Plugging in the given values, we get V = 3.75 moles / 2.00 M = 1.88 L. Therefore, the volume of the solution is 1.88 liters. In 100 words, the volume of a solution can be determined by knowing the amount of solute present and the concentration of the solution.

This is because the concentration of a solution is defined as the amount of solute dissolved in a given volume of solution. Using the formula for concentration, we can determine the amount of solute dissolved in a given volume of solution.

Then, by rearranging the formula to solve for volume, we can determine the volume of the solution required to dissolve a specific amount of solute.

to know more about concentration refer here

https://brainly.com/question/13872928#

#SPJ11

Approximately 0.35175 moles of C₁₂H₂₆ were reacted to produce 4.2105 moles of CO₂.

To find the moles of C₁₂H₂₆ that reacted to produce 4.2105 moles of CO₂, you can use the stoichiometry of the balanced chemical equation: 2 C₁₂H₂₆ + 37 O₂ → 24 CO₂ + 26 H₂O.

Step 1: Identify the mole-to-mole ratio between C₁₂H₂₆ and CO₂ in the balanced equation.
In this case, the ratio is 2 moles of C₁₂H₂₆ to 24 moles of CO₂.

Step 2: Set up a proportion to find the moles of C₁₂H₂₆.
(2 moles C₁₂H₂₆) / (24 moles CO₂) = (x moles C₁₂H₂₆) / (4.2105 moles CO₂)

Step 3: Solve for x, which represents the moles of C₁₂H₂₆.
x moles C₁₂H₂₆  = (2 moles C₁₂H₂₆) * (4.2105 moles CO₂) / (24 moles CO₂)

Step 4: Calculate the value of x.
x = (2 * 4.2105) / 24
x ≈ 0.35175

Learn more about moles at https://brainly.com/question/15356425

#SPJ11

The E° for cell reaction is - 2.37 V and  2.23 V and E for cell reaction  = 2.22V and ΔG = - 428.39kJ/mol.

The formula for solving the equation for given cell is as follows :

                      E°cell , Ecell and Δ[tex]G_{rnx}[/tex]

The standard cell potential is the potential of cell at standard condition of 1MConcentration and pressure 1 atm E°cell

calculation :

                E°cell = E° cathode - E° anode          it is calculated using the Nernst equation which is discussed below :

                  Ecell = E°cell -- [tex]\frac{RT}{nF}[/tex] 1n K  = E°cell -- [tex]\frac{0.0591}{n}[/tex]log [tex]\frac{Products}{Reactants}[/tex]

Here, F is the Faraday's constant, R is the gas constant, T is the temperature, and n is the number of transferred electrons. K is the equilibrium constant.

The Gibbs free energy is the greatest work that is finished by a framework . The standard cell potential is without like energy by the recipe as follows;and F is Faraday's steady.

A system's maximum amount of work is referred to as its Gibbs free energy. The standard cell potential is connected with the free energy by the recipe as follows:    Δ G = -n F Ecell

Here, E cell is cell potential

Δ G is the free energy n is the quantity of electrons moved and F is Faraday's steady.

 Oxidation :                                        

Mg ⇒ Mg ²⁺ + 2e⁻ E⁰anode = - 2.37 V

Reduction:Sn²⁺ + 2e⁻⇒ Sn E⁰

So,  cathode = - 0.14V

The standard cell potential is calculated as follows:E⁰ cell = - 0.14 V- (- 2.37 V ) =  2.23 V

The half reaction potentials for the oxidation and reduction are determined. They are subbed in the equation and the standard cell potential is determined.

Number of electrons transferred ,      n = 2   ,[Mg²⁺]   = 0.055M   ,  [ Sn²⁺ ]  = 0.030 M               The Nernst equation for reaction :

Ecell = E °cell = [tex]\frac{0.0591}{n}[/tex]log Mg ²⁺ / Sn²⁺

The cell potential for reaction is :

                       Ecell = 2.23V - [tex]\frac{0.0591}{2}[/tex]log[tex]\frac{0.055M}{0.030M}[/tex]= 2.22V

 The values are substituted for the reaction calculated here in the Nernst equation and cell potential.     

Calculation for the free energy for reaction ,

                                             ] Δ[tex]G_{rxn}[/tex] = -nFE cell

       = - 2 × 96485 C/ mol ×2.22 V

                          = --428393J/mol × [tex]\frac{1KJ}{1000J}[/tex]  = - 428.39kJ/mol

The cell potential for the response is subbed in the recipe and free energy for the response is determined

Nernst equation :

The standard electrode potential, absolute temperature, the number of electrons involved in the redox reaction, and activities (often approximated by concentrations) of the chemical species undergoing reduction and oxidation, respectively, can all be used to calculate the reduction potential of a half-cell or full cell reaction using the Nernst equation, a chemical thermodynamic relationship.

Learn more about Nernst Equation :

brainly.com/question/15237843

#SPJ4

During alpha decay, atomic nuclei emit alpha particles, which are helium-4 nuclei composed of two protons and two neutrons. So, during alpha decay, the total mass of the reactants is equal to the mass of the main nucleus before decay.

In beta-plus decay, also called positron emission, protons in the nucleus are converted into neutrons, and positrons and neutrinos are emitted. Since the mass of a positron is very small compared to the mass of a proton or neutron, the total mass of the reactants in beta and decay is very close to the mass of the parent nucleus before decay.

Beta -mm is also known as electrons or negatively, and the nucleus neutron is transformed into protons and electrons and is produced by antizatinrino. Because the electronic mass is very small compared to the mass of protons or neutrons, the total mass of the minimum minimum minimum reagent is very close to the body of the body.

Generally, the total mass of the reactants in a fission process is very close to the mass of the parent nucleus before fission, because the mass of the particles released during fission is much smaller than the mass of the parent nucleus. However, due to the conservation of energy and momentum, there can be slight differences in mass between the reactants and the decay products, called mass defects.

This mass defect is converted into energy according to Einstein's famous equation E = mc². where E is the energy released, m is the mass defect, and c is the speed of light.

learn more about total mass of reactants: https://brainly.com/question/19958395

#SPJ1

The compounds A, B and C are ammonium chloride, ammonia gas and silver chloride respectively.

Ammonium chloride,  is a white crystalline solid which is soluble in water. On heating with sodium hydroxide it will produce ammonia gas, which is a colorless gas and has a odor or pungent smell.

So,  Ammonia gas will turn red litmus into blue as it's pH is 11.6.

When Ammonium chloride reacts with silver nitrate  in  presence of dilute Nitric acid ,  it produces Silver chloride and Ammonium nitrate

AgCl is soluble in Ammonia because it can form complexes which

makes it behave like an ion, making it soluble.

Therefore, Compound A is Ammonium chloride,

B is ammonia gas

and C is Silver chloride.

To know more about crystalline solid here

https://brainly.com/question/28287375

#SPJ4

The complete question is

A white solid A when heated with sodium hydroxide solution gives a pungent gas B which turns red litmus paper blue. The solid when dissolved in dilute nitric acid is treated with Silver nitrate solution to give white precipitate C, which is soluble in ammonia.

(A) What are the substance A, B, and C?

The new volume of the gas, assuming constant temperature and a change in pressure from 760 torr to 730 torr, is 2.09 L.

Using the Boyle's Law equation,

P₁V₁ = P₂V₂,

where P is pressure and V is volume, we can solve for V₂ by plugging in the given values in the equation:

(760 torr)(2.00 L) = (730 torr)(V₂)

Solving for V₂, we get:

V₂ = (760 torr)(2.00 L) / (730 torr) = 2.09 L

Therefore, the new volume of the gas is 2.09 L.

This result makes sense because according to Boyle's Law, as pressure decreases, volume increases proportionally, assuming a constant temperature.

To know more about Boyle's Law, refer here:

https://brainly.com/question/21184611#

#SPJ11

Answer:

because they are poorly made

Explanation:

The heat energy transferred to the copper can be calculated using the formula:

Q = m × c × ΔT

where Q is the heat energy transferred, m is the mass of the copper, c is the specific heat capacity of copper, and ΔT is the change in temperature.

Substituting the given values:

m = 2.3 g

c = 0.385 J/g·°C

ΔT = 174.0°C - 23.0°C = 151.0°C

Q = 2.3 g × 0.385 J/g·°C × 151.0°C = 131.38 J

Therefore, the heat energy transferred to 2.3 g of copper is 131.38 J.

To know more about transferred refer here

https://brainly.com/question/31945253#

#SPJ11

Answer:

Welcome to the project on communicating design details for the properties and uses of unsaturated hydrocarbons. This project aims to enhance your understanding of the characteristics and applications of unsaturated hydrocarbons.

Here are the steps to complete this project:

Step 1: Research

Research the different types of unsaturated hydrocarbons, including alkenes and alkynes. Find out their general properties, such as their reactivity, flammability, and solubility. Also, identify their uses in various industries, such as plastics, rubber, and fuel.

Step 2: Create a Design

Using your research findings, create a design to visually communicate the properties and uses of unsaturated hydrocarbons. You can use tools like Canva, PowerPoint, or other design software to create infographics, posters, or slideshows.

Step 3: Incorporate Key Information

Incorporate the key information you gathered in step 1 into your design. Make sure to include the following details:

Definitions of unsaturated hydrocarbons, alkenes, and alkynes

Properties of unsaturated hydrocarbons, including reactivity, flammability, and solubility

Applications of unsaturated hydrocarbons in various industries, such as plastics, rubber, and fuel

Examples of unsaturated hydrocarbons, such as ethene and propene for alkenes, and ethyne for alkynes

Step 4: Review and Refine

Review your design and refine it to make sure it effectively communicates the properties and uses of unsaturated hydrocarbons. Check for spelling and grammar errors, and ensure that the information is accurate and easy to understand.

Step 5: Present Your Design

Present your design to your class or teacher, and explain the properties and uses of unsaturated hydrocarbons. You can also invite feedback and questions to enhance your understanding of the topic.

In conclusion, the properties and uses of unsaturated hydrocarbons are essential for many industries. Through this project, you will gain a better understanding of unsaturated hydrocarbons and develop your communication skills to effectively present your findings. Good luck!

Explanation:

Answer:

Explanation:

The three types of unsaturated hydrocarbons is alkynes, alkenes, and aromatic hydrocarbons. Which is composed of alkynes? acetylene. brainlist

The total number of moles, to the nearest tenth, of solute contained in 0. 50 liter of 3. 0 M HCl is 1.5 moles.

To determine the total number of moles of solute in a solution, we need to use the formula:

moles of solute = Molarity x volume in liters

Given that we have a 0.50 L solution of 3.0 M HCl, we can simply substitute the values in the formula to obtain:

moles of HCl = 3.0 mol/L x 0.50 L = 1.5 moles of HCl

Therefore, there are 1.5 moles of HCl in 0.50 liters of 3.0 M HCl solution. We can round this to the nearest tenth, giving us a final answer of 1.5 moles of HCl.

To know more about the moles of solute refer here :

https://brainly.com/question/31039725#

#SPJ11

The change in water flow caused by dams can have a significant impact on the erosion and deposition of rocks and soil on Earth's surface.

To model the way this change in flow affects Earth's rocks and soil, we could use a computer simulation that takes into account the topography and geological features of a particular area, as well as the flow rates and patterns of the water before and after the construction of the dam.

The model could simulate the erosion and deposition of rocks and soil by modeling the movement of sediment and the transport of materials downstream.

For example, the model could show how the reduction in water flow downstream of the dam can cause sediment to accumulate and form deltas or other landforms, while the increase in flow upstream of the dam can cause increased erosion and instability of the riverbank.

The model could also show how the change in flow affects the distribution of nutrients and minerals in the soil, which can have implications for plant growth and ecosystem health.

For example, the reduced water flow downstream of the dam could result in lower nutrient levels in the soil, which could impact the growth of crops and other plants.

Overall, the model would likely show that the construction of a dam can have complex and far-reaching effects on the landscape and ecosystem of the surrounding area.

These effects can vary depending on the specific characteristics of the river, the The change in water flow caused by dams can have a significant impact on the erosion and deposition of rocks and soil on Earth's surface.

To model the way this change in flow affects Earth's rocks and soil, we could use a computer simulation that takes into account the topography and geological features of a particular area, as well as the flow rates and patterns of the water before and after the construction of the dam.

The model could simulate the erosion and deposition of rocks and soil by modeling the movement of sediment and the transport of materials downstream.

For example, the model could show how the reduction in water flow downstream of the dam can cause sediment to accumulate and form deltas or other landforms, while the increase in flow upstream of the dam can cause increased erosion and instability of the riverbank.

The model could also show how the change in flow affects the distribution of nutrients and minerals in the soil, which can have implications for plant growth and ecosystem health.

For example, the reduced water flow downstream of the dam could result in lower nutrient levels in the soil, which could impact the growth of crops and other plants.

Overall, the model would likely show that the construction of a dam can have complex and far-reaching effects on the landscape and ecosystem of the surrounding area.

These effects can vary depending on the specific characteristics of the river, the topography of the area, and the design and operation of the dam. of the area, and the design and operation of the dam.

To know more about flow refer here

https://brainly.com/question/28494347#

#SPJ11

Translating the given balanced chemical equation into words :A.)Phosphorus pentachloride and water yield phosphoric acid and hydrochloric acid.

Phosphorus pentachloride and water react to yield phosphoric acid and hydrochloric acid. Balanced chemical equation shows that for every one mole of PCl₅ and four moles of H₂O that react, one mole of H₃PO₄ and five moles of HCl are produced.

Phosphorus pentachloride (PCl₅) is a chemical compound composed of one phosphorus atom and five chlorine atoms. It is yellowish-white crystalline solid that is highly reactive and can decompose violently when exposed to water or moist air.

PCl₅ is primarily used as a chlorinating agent in organic chemistry, where it is used to convert alcohols, carboxylic acids, and other functional groups into the corresponding chlorides.

To know more about PCl5, refer

https://brainly.com/question/12994231

#SPJ1

The solubility of some compounds does change with pH. Specifically, the solubility of compounds containing hydroxide ions (OH-) or carbonate ions (CO3^2-) will increase as the pH becomes more basic. For example, CaCO3 and Mg(OH)2 will have higher solubility at pH 8 compared to pH 5 or 7.

On the other hand, compounds containing sulfates (SO4^2-) or fluorides (F-) will have minimal pH dependence. For example, BaSO4 and CaF2 will have similar solubility at pH 5, 7, and 8.

For compounds with Ksp values given in the table, the pH at which highest solubility is achieved is dependent on the specific compound. The highest solubility pH for each compound can be determined by examining the specific ion involved and its dependence on pH.
Based on the provided Ksp values, I'll analyze the solubility of some of the compounds at different pH levels:

1. NaBr: Solubility does not change with pH as it's a neutral salt and neither cation nor anion react with water.

2. BaCrO4: Solubility changes with pH. Highest solubility at pH = 7, because the anion (CrO4^2-) can form a precipitate with Ba^2+ at lower pH levels.

3. CaCO3: Solubility changes with pH. Highest solubility at pH = 5, because the anion (CO3^2-) can form a precipitate with Ca^2+ at higher pH levels.

4. CaF2: Solubility does not significantly change with pH as it's a slightly soluble salt, and the anion (F-) does not react with water.

5. Co(OH)2: Solubility changes with pH. Highest solubility at pH = 5, because the compound can form a precipitate at higher pH levels due to increased hydroxide concentration.

Note that due to the format of the provided information, it's not possible to analyze all compounds. However, this methodology can be applied to the remaining compounds based on their Ksp values and potential reactions with water.

To know more about Solubility-pH relation:

https://brainly.com/question/31632429

#SPJ11

0.125 L HCl solution, or 125 mL HCl solution  (Depending on the units requested)

Major steps:

1. Determine the chemical formulas for each compound

2. Write the unbalanced chemical equation, and balance it

3. Use dimensional analysis to determine the amount of acid needed.

Step 1. Determine the chemical formulas for each compound

hydrochloric acid is [tex]HCl[/tex].  This is from memorization of nomenclature, or consulting a resource.

Iron (iii) hydroxide is [tex]Fe(OH)_3[/tex] . This is from memorization of nomenclature, knowing that the charge on "hydroxide" is a negative 1, and that 3 hydroxide ions will be needed to balance the charge with a Iron (iii), or consulting a resource.

Step 2.  Write the unbalanced chemical equation, and balance it

For "neutralization reactions", an "Acid" and a "Base" will combine to form Water and a "salt".

Unbalanced chemical equation:

[tex]HCl + Fe(OH)_{3} \rightarrow H_{2}O+ FeCl_{3}[/tex]

Balance the equation by increase the number of "Chlorines" on the left, and the number of "hydroxides" (trapped in the 'water') on the right.

Balanced chemical equation:

[tex]3HCl + Fe(OH)_{3} \rightarrow 3H_{2}O+ FeCl_{3}[/tex]

Step 3. Use dimensional analysis to determine the amount of acid needed.

Knowing we have 25.0mL of Iron (iii) hydroxide solution (in milliliters), we first convert to Liters (since concentrations for "molarity" are measured in moles per Liter).

Then convert to convert to moles of Iron(iii) hydroxide using the solution's concentration.

Convert to moles of hydrochloric acid using the mole ratio from the balanced chemical equation.

Lastly convert to volume of the hydrochloric acid solution using that solution's concentration:

[tex]\dfrac{25.0 \text{ mL } Fe(OH)_3 \text{ solution}}{1} * \dfrac{1 \text{ L }}{1000 \text{ mL }} * \dfrac{0.25 \text{ mol } Fe(OH)_3 }{1 \text{ L } Fe(OH)_3 \text{ solution}} * \dfrac{3 \text{ mol } HCl }{1 \text{ mol } Fe(OH)_3 } * \dfrac{1 \text{ L } HCl \text{ solution} }{0.150 \text{ mol } HCl }=[/tex]

[tex]=0.125 \text{ L } HCl \text{ solution}[/tex]

If the requested answer should be measured in milliliters, one last conversion will yield the answer:

[tex]\dfrac{0.125 \text{ L } HCl \text{ solution}}{1} * \dfrac{1000 \text{ mL }}{1 \text{ L }} = 125 \text{ mL } HCl \text{ solution}[/tex]

Observe that the original measurements use 3 significant figures, so each answer should use 3 significant figures (both answers do).

Answer:Starting with 51,300 grams of water, we can theoretically produce 45,592 grams of oxygen using electrolysis, based on the balanced equation 2H₂O → 2H₂ + O₂.

Answer:

4 valence electrons.

Explanation:

Carbon has 4 valence electrons because it is in the 14th group on the Periodic Table.

175.16 grams of[tex]CaCO3[/tex]will be produced when 98.2 grams of [tex]CaO[/tex] are reacted with an excess of [tex]CO2[/tex].

The balanced chemical equation for the reaction between[tex]CaO and CO2[/tex]is:

[tex]CaO + CO2 → CaCO3[/tex]

According to the equation, one mole of[tex]CaO[/tex] reacts with one mole of [tex]CO2[/tex]to produce one mole of [tex]CaCO3[/tex].

The molar mass of [tex]CaO[/tex]is 56.08 g/mol, and the molar mass of [tex]CO2[/tex] is 44.01 g/mol. Therefore, the number of moles of [tex]CaO[/tex] present in 98.2 g can be calculated as:

moles of [tex]CaO[/tex] = mass / molar mass = 98.2 g / 56.08 g/mol = 1.75 mol

Since the reaction is with an excess of [tex]CO2[/tex], all the [tex]CaO[/tex]will react. Therefore, the number of moles of CaCO3 produced will be the same as the number of moles of [tex]CaO[/tex] used, which is 1.75 mol.

The molar mass of [tex]CaCO3[/tex]is 100.09 g/mol. Therefore, the mass of [tex]CaCO3[/tex] produced can be calculated as:

mass of [tex]CaCO3[/tex] = moles of [tex]CaCO3[/tex] × molar mass = 1.75 mol × 100.09 g/mol = 175.16 g

To know more about balanced chemical equation  refer to-

https://brainly.com/question/28294176

#SPJ11

The enthalpy change when 8.00 g of nitrogen oxide react is -15.162 kJ for the given chemical reaction.

The molar mass of NO =  30.01 g/mol

8.00 g of NO  = 8.00 g / 30.01 g/mol

8.00 g of NO = 0.266 mol of NO

Heat rejection = 57. 0 kJ

Here, 1 mole of NO reacts with 1/2 mole of Oxygen to produce 1 mole of [tex]NO_{2}[/tex]

The amount of Oxygen required for 0.266 mol of NO is calculated as:

The amount of Oxygen = 0.266 mol NO x (1/2) mol [tex]O_{2}[/tex]    / 1 mol NO

The amount of Oxygen required = 0.133 mol [tex]O_{2}[/tex]

The heat reaction will be:

-57.0 kJ/mol x 0.266 mol NO = -15.162 kJ

Therefore, we can conclude that the enthalpy change is -15.162 kJ.

To learn more about Nitrogen dioxide

https://brainly.com/question/21173133

#SPJ4

H2O⋅⋅⋅⋅⋅⋅H−CH3 shows intermolecular attraction between water molecules and methane molecules, but not a hydrogen bond specifically.

A hydrogen bond is a type of intermolecular attraction that occurs when a hydrogen atom is bonded to an electronegative atom such as nitrogen, oxygen, or fluorine, and it is attracted to another electronegative atom in a nearby molecule. This attraction is represented by a dotted line.

Looking at the choices provided, the only option that shows a hydrogen bond is H3N⋅⋅⋅⋅⋅⋅H−O−H. In this molecule, the hydrogen atom in the H−O−H group is bonded to the highly electronegative oxygen atom, and it forms a hydrogen bond with the lone pair of electrons on the nitrogen atom in the H3N group.

The dotted line between the H and N represents the hydrogen bond.

In contrast, the other options do not show a hydrogen bond. H−H represents a simple covalent bond between two hydrogen atoms, while H4C⋅⋅⋅⋅⋅⋅H−F represents a covalent bond between a carbon atom and a fluorine atom, with no electronegative atoms capable of forming a hydrogen bond. H2O⋅⋅⋅⋅⋅⋅H−CH3 shows intermolecular attraction between water molecules and methane molecules, but not a hydrogen bond specifically.

To know more about intermolecular attraction, visit:

https://brainly.com/question/10626096#

#SPJ11

Magnesium metal will conduct electricity via mobile electrons whether it is in the solid or liquid state.

Magnesium oxide will not conduct electricity in the solid state as they are no mobile charge carriers.

Molten (liquid) magnesium oxide has mobile ions and these can transfer electrons via mobile ions. This is electrolysis and the compound is turned back into its elements (magnesium and oxygen).

By considering the solubility rules, we can determine whether a precipitate will form and its empirical formula when mixing two aqueous solutions.

The table can be completed as follows(image attached):

To determine whether a precipitate will form when solutions A and B are mixed, we need to consider the solubility rules of the compounds involved. If the product of the ions in the solution is insoluble, then a precipitate will form.

In the first case, potassium sulfide (K2S) and iron(II) sulfate (FeSO4) will react to form potassium sulfate (K2SO4) and iron(II) sulfide (FeS), which is insoluble. Thus, a precipitate will form with empirical formula FeS. In the second case, both zinc sulfate (ZnSO4) and iron(II) bromide (FeBr2) are soluble in water and will not react to form an insoluble compound. Therefore, no precipitate will form.

In the third case, barium bromide (BaBr2) and potassium acetate (KC2H3O2) will react to form barium acetate (Ba(C2H3O2)2) and potassium bromide (KBr), which is soluble. However, barium acetate is insoluble and will form a precipitate with empirical formula Ba(C2H3O2)2.

To know more about the Aqueous solutions, here

https://brainly.com/question/29987702

#SPJ4

To get the initial pH, you need to calculate the new concentration of the substance in the diluted solution and add the required amount of substance to achieve the desired pH.

pH is a measure of the acidity or basicity of a solution. It is a logarithmic scale ranging from 0 to 14, where a pH of 7 is considered neutral, below 7 is acidic, and above 7 is basic.

If you add too much water to your solution, it will dilute the concentration of the substance in the mixture and may change the pH. To get the initial pH, you cannot simply add the same volume of the substance as the water you added back into the mixture.

This is because the amount of substance required to achieve the desired pH is dependent on the concentration of the substance in the mixture.

To determine the amount of substance required to achieve the desired pH, you need to calculate the new concentration of the substance in the diluted solution. This can be done using the formula:

C1V1 = C2V2

Where C1 is the initial concentration, V1 is the initial volume, C2 is the final concentration, and V2 is the final volume.

Once you have calculated the new concentration, you can then add the required amount of substance to the diluted solution to achieve the desired pH.

In summary, adding too much water to a solution can change the pH, and adding the same volume of substance as the water added will not restore the initial pH. To get the initial pH, you need to calculate the new concentration of the substance in the diluted solution and add the required amount of substance to achieve the desired pH.

To know more about pH, visit:

https://brainly.com/question/15289741#

#SPJ11