based on the distribution of electrons, which would you expect to be least likely to form a chemical bond with another atom?

Another form of acid rain is one based around a nitrogen-containing acid, which is nitric acid (HNO₃). Nitrogen dioxide (NO₂) and nitrogen monoxide (NO) gases will react with water to produce this acid.

What is acid rain?

Here are the balanced equations to demonstrate this:

1. Nitrogen monoxide reacts with oxygen to form nitrogen dioxide:
2NO + O₂ → 2NO₂

2. Nitrogen dioxide reacts with water to form nitric acid and nitrogen monoxide:
2NO₂ + H₂O → HNO₃ + NO

These reactions lead to the formation of nitric acid, which contributes to acid rain.

To know more about Acid rain:

https://brainly.com/question/11543614?

#SPJ11

Answer:

To separate calcium carbonate from a mixture of calcium carbonate and water, you use filtration

Explanation:

Here you need to know that calcium carbonates, like most carbonates, are insoluble so it will not dissolve in the water. Remember that filtration is the method used to separate solids and liquids by passing the mixture through a funnel lined with filter paper.

Hope this helps:)

Please mark the brainliest

The required gas volumes obtained at different pressures is a. [tex]1.05m^3[/tex] , b. [tex]595.72cm^3[/tex], c. [tex]0.731m^3[/tex], d. [tex]504.03cm^3[/tex] and e. [tex]0.108m^3[/tex].

The ideal gas equation is a mathematical equation used to relate the four main properties of an ideal gas: pressure (P), volume (V), temperature (T), and moles of gas (n). It is expressed as PV = nRT, where R is the ideal gas constant. This equation is used to calculate the pressure, volume, and temperature of an ideal gas given any two of these properties.

a. Given [tex]0.600m^3[/tex] at 110.0kPa to 62.4kPa

We can calculate this using the ideal gas law:

P1V1 = P2V2

0.600 * 110.0 = 62.4 * V2

V2 = [tex]1.05m^3[/tex]

b. Given [tex]380.0cm^3[/tex] at 66.0kPa to 42.1kPa

P1V1 = P2V2

380 * 66.0 = 42.1 * V2

V2 = [tex]595.72cm^3[/tex]

c. Given [tex]0.338m^3[/tex] at 102.4kPa to 47.3kPa

P1V1 = P2V2

0.338 * 102.4 = 47.3 * V2

V2 = [tex]0.731m^3[/tex]

d. Given [tex]248cm^3[/tex] at 94.1kPa to 46.3kPa

P1V1 = P2V2

248 * 94.1 = 46.3 * V2

V2 = [tex]504.03cm^3[/tex]

e. Given [tex]0.123m^3[/tex] at 104.1kPa to 117.7kPa

P1V1 = P2V2

0.123 * 104.1 = 117.7 * V2

V2 = [tex]0.108m^3[/tex]

To learn more about volume click here https://brainly.com/question/25252629

#SPJ1

The first energy level of an atom is filled its second energy level which contains three additional electrons the element in this atom is sodium (Na).

The electronic configuration of the atom is determined by the number of electrons in each of its energy levels. Based on the given information, the atom has a filled first energy level and three electrons in its second energy level.

The second energy level can hold a maximum of eight electrons, so the atom has a total of 11 electrons. The element with 11 electrons is sodium (Na), which has an electronic configuration of 1s² 2s² 2p⁶ 3s¹.

Therefore, the atom in question is sodium (Na).

Sodium is highly reactive and must be stored in a dry environment to prevent it from reacting with moisture in the air. It is also highly flammable and can react violently with water, so it must be handled with care. Sodium is commonly found in salt (sodium chloride), which is an essential component of the human diet.

To know more about electronic configuration here

https://brainly.com/question/14283892

#SPJ4

When answering questions on the Brainly platform, it is important to be factually accurate, professional, and friendly. Conciseness is also key, so it is important to avoid providing extraneous amounts of detail. It is important to pay close attention to the question and not ignore any typos or irrelevant parts.

The following terms should be used in your answer for this question: Al(CIO2)3 AsCl3 Pb(C,H3O2)2 Cu(NO2)2 Cl207 Ca3 (PO4)2 MGCO3 lonic Molecular.Ionic compounds: Al(CIO2)3, Pb(C,H3O2)2, Ca3 (PO4)2, MGCO3.Molecular compounds: AsCl3, Cu(NO2)2, Cl207.Ionic compounds are made up of oppositely charged ions, whereas molecular compounds are made up of covalently bonded atoms that share electrons. Al(CIO2)3, Pb(C,H3O2)2, Ca3 (PO4)2, and MGCO3 are all examples of ionic compounds because they are composed of metal and non-metal atoms, which have different electronegativity values and can transfer electrons to form ions. In contrast, AsCl3, Cu(NO2)2, and Cl207 are examples of molecular compounds because they are composed of covalently bonded non-metal atoms that share electrons to form a stable molecule.In summary, when answering questions on Brainly, it is important to provide accurate and concise information that is relevant to the question being asked. In this particular question, the terms ionic and molecular were used, and it was important to provide examples of each type of compound.

for more such question on Molecular

https://brainly.com/question/24191825

#SPJ11

The molar heat of neutralization reaction of CH₃COOH is -56.08 kJ/mol.

The formula to calculate the molar heat of neutralization.

∆H° = Σ ∆Hf° (products) - Σ∆Hf°(reactants)

Where,

∆H° = molar heat of neutralization

Σ∆Hf° (products) = sum of the standard heat of formation of products

Σ∆Hf° (reactants) = sum of the standard heat of formation of reactants.

∆H° = [∆Hf° {CH3COO- (aq)} + ∆Hf° {H2O (l)}] - [∆Hf° {CH3COOH (aq)} + ∆Hf° {OH- ​​​​​​​(aq)}]

Substituting the values we get,

∆H° = [(-486.01) + (-285.83)] - [(-485.76) + (-230.0)]

∆H° =  -56.08 kJ/mol

Hence, The molar heat of neutralization reaction of CH₃COOH is -56.08 kJ/mol.

Learn more about molar heat of neutralization from the link given below.

https://brainly.com/question/14156911

#SPJ4

If the solution is not overly basic, the concentration of hydronium and hydroxide ions in the apple juice is 2.24 x 10⁻¹¹ M.

The pH of a solution is a measure of its acidity or basicity. A pH of 3.33 indicates that the solution is acidic. To determine the concentration of hydronium (H₃O⁺) and hydroxide (OH⁻) ions in the apple juice, we can use the following equation:

pH + pOH = 14

where pOH is the negative logarithm of the hydroxide ion concentration [OH⁻]. At room temperature, we assume that the concentration of [H₃O⁺] is equal to [OH⁻] because the solution is not highly basic.

Therefore, we can rearrange the above equation to find the concentration of H₃O⁺ as follows:

pOH = 14 - pH = 14 - 3.33 = 10.67

[OH⁻] = 10^(-pOH) = 10⁻¹⁰⁶⁷= 2.24 x 10⁻¹¹ M

[H₃O⁺] = [OH⁻] = 2.24 x 10⁻¹¹ M

Thus, the concentration of hydronium and hydroxide ions in the apple juice is 2.24 x 10⁻¹¹ M, assuming the solution is not highly basic.

To learn more about concentration refer to:

brainly.com/question/10725862

#SPJ4

The statement is True.

The entropy of a system is a measure of the disorder or randomness of its particles. The greater the number of possible arrangements of particles, the greater the entropy.

In this case, NO₂(g) has a higher entropy than N₂O4(g) because it has more possible arrangements of particles. NO₂(g) is a brownish-red gas, composed of two different atoms (nitrogen and oxygen), and its molecules are bent in shape. On the other hand, N₂O₄(g) is a colorless gas composed of two identical N₂O₂ molecules, which are linear in shape.

The different compositions and shapes of the molecules in NO₂(g) result in a larger number of possible arrangements of particles than in N₂O₄(g). Therefore, 1 mole of NO₂(g) has a greater entropy than 1 mole of N₂O₄(g), making the statement true.

To learn more about entropy refer to:

brainly.com/question/15025401

#SPJ4

1) The most reactive compound is phenol because the  electron donating character of the alcohol group increases the rate of the reaction.

2) The least reactive compound is nitrobenzene because of the electron withdrawing character of the nitro group decreases the rate of the reaction.

The rate of the electrophilic substitution reaction is the directly proportional to the nucleophilicity of the benzene ring. The group which will increase the electron density in the benzene ring that means the electron donating group will increase the nucleophilicity of the Benzene ring which will results in the increase in the rate of the reaction towards the  electrophilic substitution reaction.

1) The phenol that is the OH group is electron withdrawing is the most reactive towards the electrophilic substitution reaction.

2) The -NO₂ group is the ring deactivating group that is it is the less reactive toward the electrophilic substitution.

To learn more about electrophilic substitution here

https://brainly.com/question/16811879

#SPJ4

A chemist wants to prepare a stock solution of H₂SO₄ so that samples of 20.00mL  the chemist should use 45.0 L of concentrated acid to prepare 5.00 L of the stock solution.

a. To calculate the molarity of the stock solution, we can use the formula:

M₁V₁ = M₂V₂

where M1 is the molarity of the stock solution, V₁ is the volume of the stock solution used to make the final solution, M₂ is the desired final concentration, and V₂ is the final volume of the solution.

In this case, we have:

M₁(20.00 mL) = 0.50 M (100.0 mL + 20.00 mL)

Simplifying and solving for M1, we get:

M₁= 2.00 M

Therefore, the molarity of the stock solution should be 2.00 M.

b. To calculate the volume of concentrated acid needed to prepare 5.00 L of the stock solution, we can use the formula:

V₁= (M₂ x V₂) / M₁

where V1 is the volume of concentrated acid needed, M₂ is the desired molarity of the final solution, V₂ is the final volume of the solution, and M1 is the molarity of the concentrated acid.

In this case, we have:

V1 = (18.0 M x 5.00 L) / 2.00 M

Simplifying, we get:

V1 = 45.0 L

Learn more about solution here:

https://brainly.com/question/30665317

#SJP1

The pH of a 0.0037 M solution of H₂CO₃ is 6.32.

The solubility of CO₂in pure water at 25 °C and 0.1 atm pressure is 0.0037 M. The common practice is to assume that all of the dissolved CO₂ is in the form of carbonic acid (H₂CO₃), which is produced by the reaction between CO₂ and H₂O.

H₂CO₃ is a weak acid that dissociates to form H+ and HCO₃⁻ ions. It is clear that the concentration of the H+ ions produced will be less than the concentration of the H₂CO₃ molecules; this means that H2CO3 will be partially dissociated.The dissociation constant for carbonic acid is given by the expression as shown below;

Ka=[H+][HCO₃⁻]/[H₂CO₃]

The concentration of carbonic acid is given as 0.0037 M, which means [H₂CO₃] = 0.0037 M

and the concentration of  H⁺ ions, as well as HCO₃⁻ ions is assumed to be x.

When H₂CO₃ dissociates, it produces H+ and HCO₃⁻ ions. At equilibrium, the concentrations of the H+ and HCO₃⁻ ions formed are represented as [H+] and [HCO₃⁻], respectively.The balanced equation of the dissociation of H₂CO₃ is:

H₂CO₃ H⁺ + HCO₃⁻

The ion product expression for the dissociation of carbonic acid is given as follows:[H⁺][HCO₃⁻]/[H₂CO₃] = Kd

When [H⁺] and [HCO₃⁻] are equal, we can substitute H⁺ in place of [HCO₃⁻] and thus obtain:[H⁺]2 = Kd × [H₂CO₃] / [HCO₃⁻3-]

On substituting values in the above expression, we get:

[H+]2 = 4.8 × 10-7 M × 0.0037 M / 0.0037 M= 4.8 × 10-7 M

pH = -log [H⁺+]

pH = -log (4.8 × 10⁻⁷-7) = 6.32

Therefore, the pH of a 0.0037 M solution of H₂CO₃ is 6.32.

Learn more about pH on:

https://brainly.com/question/172153

#SPJ11

As a result, the gas's internal energy has decreased by -4.1 kJ. The negative sign denotes a decrease in the gas' internal energy, which is compatible with the gas's exerting force on its surroundings.

The following equation can be used to determine specific heat, abbreviated Cp: Cp=Qm ΔT When m is the material's mass, Q is the quantity of heat energy delivered to the substance, and T is the temperature change of the substance, we can write C p = Q m T.

According to the first law of thermodynamics, a system's internal energy change (E) equals the heat it receives (Q) minus the work it performs (W).

ΔE = Q - W

In this instance, the petrol performs 9.2 kJ of work and absorbs 5.1 kJ of heat (Q = 5.1 kJ). Inputting these values into the previous equation results in:

ΔE = 5.1 kJ - 9.2 kJ

ΔE = -4.1 kJ

To know more about heat energy visit:-

https://brainly.com/question/29210982

#SPJ1

If one attempts to use column chromatography on silica gel to separate the product ester and excess reagent after a Fischer esterification, the mobile phase should have the characteristic of being non-polar.

The following are the experimental analysis required to find the proper conditions for such a separation are solvent system selection, silica gel type, choice of column size, flow rate, column efficiency, determination of analyte detection wavelength, detection limit determination, determination of linearity and range. The mobile phase is used in chromatography to dissolve the sample and transfer it through the stationary phase.

In column chromatography, the stationary phase is composed of a porous solid (such as silica gel) in a column. A mobile phase that is non-polar is required to elute the ester and excess reagent. The elution solvent's polarity affects the solubility of the components in the stationary phase, as well as the retention time of the component in the stationary phase. A polar solvent would increase retention time, while a non-polar solvent would reduce retention time. As a result, a non-polar mobile phase should be utilized to elute the product ester and excess reagent.

Learn more about non-polar at:

https://brainly.com/question/545359

#SPJ11

The balanced chemical equation for the reaction is:

NH3(g) + CO2(g) ⇌ NH2COONH4(s)

The AH value for the reaction is -117 kJ/mol.

The equation including the AH value can be written as:

NH3(g) + CO2(g) ⇌ NH2COONH4(s) ΔH = -117 kJ/mol

i)   Either Q or R could potentially form an ionic bond with S because the element S has the highest electronegativity (6), while the other two elements have lower electronegativity values.

ii)

S and Q are more likely to form a polar covalent bond because the electronegativity difference between S and Q (6 - 3.64 = 2.36) is greater than the electronegativity difference between S and R (6 - 3 = 3).

iii)

The electronegativity difference between Q and R (3.64 - 3 = 0.64) is relatively small, indicating that they are more likely to form a non-polar covalent bond.

In a polar covalent bond, the electrons are shared unequally between the two atoms, thus creating a partial positive charge on one atom and a partial negative charge on the other.

The greater the difference in electronegativity between the two atoms, the more polar the bond will be.

Learn more about  polar covalent bond, at: https://brainly.com/question/3978603

#SPJ1

Many metabolic tests involve the breakdown or utilization of different substrates or molecules by microorganisms or cells. These reactions often involve the production or consumption of protons (H+) or hydroxide ions (OH-), which can significantly affect the pH of the environment.

In order to monitor these metabolic reactions, pH indicators are often used to track changes in the pH of the medium or solution being tested. pH indicators are chemical compounds that change color in response to changes in the pH of the surrounding solution. They can provide a visual indication of the acidity or basicity of the solution and can be used to monitor changes in pH over time.

In some cases, the pH of the medium can also affect the rate or efficiency of certain metabolic reactions. For example, certain enzymes or microorganisms may function optimally at specific pH ranges, and variations in pH outside of these ranges can inhibit or reduce their activity. Therefore, monitoring pH changes during metabolic tests can provide important information about the rate and efficiency of the metabolic reactions being studied.

Overall, pH indicators play a crucial role in many metabolic tests by allowing researchers to monitor changes in pH over time and providing important information about the rate and efficiency of the metabolic reactions being studied.

Learn more about pH here brainly.com/question/2288405

#SPJ4

Radical halogenation is a chemical reaction where a halogen atom, such as chlorine or bromine, is introduced to an organic compound through the formation of free radicals. The change in color observed during the reaction is due to the formation and consumption of various reactive species, such as the halogen radicals and the organic radicals, as the reaction progresses.

In the initial stage, halogen molecules (e.g., Cl2 or Br2) dissociate into halogen radicals, which are highly reactive species. These radicals react with the organic compound to form organic radicals, which further react with other halogen molecules. As these species are generated and consumed during the reaction, the concentration of colored species in the reaction mixture changes, leading to the observed color change.

This color change is indicative of the reaction progress and provides insights into the kinetics of the reaction. For example, the appearance of the initial color indicates that the halogen radicals have formed and that the reaction has started. As the color changes or fades, it suggests that the concentration of the reacting species is decreasing, and the reaction is approaching completion. Monitoring the color change can help chemists determine the reaction's progress and efficiency, enabling better control over reaction conditions and product yields.

In summary, the change in color during radical halogenation is caused by the formation and consumption of reactive species, such as halogen and organic radicals. This color change provides valuable information about the reaction progress and can be used as a visual indicator to monitor and optimize the reaction conditions

for more such question on compound

https://brainly.com/question/26487468

#SPJ11

It is important to use the same volume of cation and anion solution during the investigation to maintain a balanced reaction and ensure accurate results.

When the volumes are equal, it allows for a complete and controlled reaction between the cations and anions, minimizing the chances of errors due to excess reactants. Additionally, using the same volume helps simplify calculations and analysis of the results. Let me explain the process step by step:

1. Measuring equal volumes of cation and anion solutions ensures a balanced reaction, where the number of positive and negative ions are equal.
2. With balanced reactions, it becomes easier to observe and analyze the outcomes, such as precipitation or changes in conductivity.
3. Equal volumes help in maintaining consistency and comparability across different trials or experiments, leading to more reliable data.
4. Using the same volume reduces the chances of errors due to excess reactants and makes it simpler to calculate concentrations and other properties of the solutions.
5. The uniformity of volumes allows for easier identification of trends or patterns when comparing different cation-anion combinations.

In conclusion, using the same volume of cation and anion solutions during the investigation ensures accurate results, simplifies calculations, and allows for a controlled and complete reaction between the ions in the water.

More about Cation and Anion:

https://brainly.com/question/4933048

#SPJ11

The given statement "  The point at which indicator undergoes color change is called end point titration." True.

The endpoint of a titration is the point at which the indicator being used undergoes a color change, indicating that the reaction between the analyte and the titrant is complete. The choice of indicator depends on the nature of the reaction being studied and the pH range in which the reaction occurs. The indicator is selected such that its color changes at the pH at which the reaction is complete. For example, phenolphthalein is commonly used as an indicator in acid-base titrations because it changes from colorless to pink in the presence of a base, indicating the endpoint of the titration.

To know more about titration, here

brainly.com/question/2728613

#SPJ4

An unknown mineral sample scratches fluorite but cannot scratch apatite. The approximate hardness of this mineral is B) 4.5.

The Mohs scale of mineral hardness is a qualitative ordinal scale that characterizes scratch resistance of minerals through the ability of harder material to scratch softer material. The scale was introduced in 1812 by the German geologist and mineralogist Friedrich Mohs. Each of the ten hardness values in the Mohs scale is represented by a reference mineral. The hardness of a material is measured against the scale by finding the hardest material that the given material can scratch, or the softest material that can scratch the given material. The Mohs scale is useful for identification of minerals in the field.

Learn more about fluorite here: brainly.com/question/15080107

#SPJ4

When answering questions on the Brainly platform, it is important to always be factually accurate, professional, and friendly. Additionally, it is important to be concise and not provide extraneous amounts of detail, while also avoiding ignoring any typos or irrelevant parts of the question.

When answering questions, it is helpful to use the terms and information provided in the student question, while also providing a clear and thorough response.In order to calculate the reaction velocity when the substrate concentration is 0.25mm in an enzyme- Catalysis reaction with a Km of 1 mm and a Vmax of 5 nm/sec, several steps must be taken. First, it is important to note that the Michaelis-Menten equation can be used to describe the relationship between the rate of an enzyme-catalyzed reaction and the substrate concentration. The Michaelis-Menten equation is as follows:v = (Vmax[S])/(Km + [S])Where:v is the reaction velocityVmax is the maximum reaction velocity[S] is the substrate concentration Km is the Michaelis constant By plugging in the given values for Vmax, Km, and [S], we can solve for the reaction velocity:v = (5 nm/sec)(0.25 mm)/((1 mm) + (0.25 mm))v = 1.25 nm/secTherefore, the reaction velocity when the substrate concentration is 0.25mm in an enzyme-catalyzed reaction with a Km of 1 mm and a Vmax of 5 nm/sec is 1.25 nm/sec.

for more such question on  Catalysis

https://brainly.com/question/1372992

#SPJ11

Conduction is the mechanism through which heat is transferred between materials that are in close proximity to one another. Typically, it happens in solids. While frying veggies in a skillet, as an illustration of conduct.

When neighbouring atoms or molecules meet, heat energy is delivered by conduction. Conduction occurs more readily in solids and liquids than in gases because of the closer spacing of the particles in these two states.

The process by which heat is transmitted from an object's hotter end to its cooler end is known as conduction. The term "thermal conductivity" refers to an object's capacity to transfer heat, and it is represented by the letter k.

To know more about Conduction visit:-

https://brainly.com/question/19025358

#SPJ1

Polycyclic Aromatic Hydrocarbons (PAHs) are a category of chemical compounds that consist of at least two aromatic rings combined in different ways. They are a group of organic chemicals that have a common core structure and are made up of multiple fused aromatic rings.

Polycyclic Aromatic Hydrocarbons (PAHs) are a group of complex organic compounds with two or more fused aromatic rings in their structure. PAHs are a result of the incomplete combustion of organic substances and are found in a wide range of environmental materials, including fossil fuels and byproducts, as well as atmospheric emissions from vehicles and industrial operations. PAHs are known carcinogens, and long-term exposure to these chemicals can lead to a variety of health issues. PAHs are found in a variety of environmental substances, including air, soil, and water, as well as in several commercial and industrial products.

Learn more about Polycyclic Aromatic Hydrocarbons: https://brainly.com/question/16963664

#SPJ11

H) To produce two H2O molecules, we need four hydrogen atoms and two oxygen atoms ;  I) For oxygen molecules, we need one molecule of O2 to produce two H2O molecules ; J) Two hydrogen molecules react with one oxygen molecule to produce two water molecules

Equations that make use of chemical formulae and symbols to represent chemical reactions are called chemical equations.

H) To produce two H2O molecules, we need four hydrogen atoms and two oxygen atoms. As each hydrogen molecule contains two hydrogen atoms, we need a total of two hydrogen molecules to produce two H2O molecules.

I) For oxygen molecules, we need one molecule of O2 to produce two H2O molecules because each O2 molecule contains two oxygen atoms.

J) "Word equation" for the reaction is: Two hydrogen molecules react with one oxygen molecule to produce two water molecules.

To know more about chemical equation, refer

https://brainly.com/question/23877810

#SPJ1

To prepare the spectrophotometer of 2.33 ml of the stock solution to make it the 10.0 ml solution. if it has concentration of the 0.0406, the concentration is 0.0094 M.

The concentration of the solution, C₁= 0.0406 M

The concentration of the solution, C₂= ?

The volume of the solution, V₁ = 2.5 mL

The volume of the solution , V₂= 10.0 mL

The expression is as :

C₁V₁ = C₂V₂

C₂ = C₁V₁ / V₂

Where,

The C₁ = 0.0406 M

The V₁ = 2.33 mL

The C₂ = ?

The V₂ = 10 mL

C₂ = ( 0.0406 × 2.33 ) / 10

C₂ = 0.0094 M

The final concentration is 0.0094 M.

To learn more about concentration here

https://brainly.com/question/15588221

#SPJ4

The balanced chemical equation for the decomposition of potassium chlorate is:

2 KClO3(s) → 2 KCl(s) + 3 O2(g)

According to the equation, 2 moles of KCl are produced for every 2 moles of KClO3 that decompose. The molar mass of KClO3 is 122.55 g/mol, while the molar mass of KCl is 74.55 g/mol. Therefore, we can use the following steps to calculate the amount of KCl produced:

Calculate the number of moles of KClO3:

moles of KClO3 = mass of KClO3 / molar mass of KClO3

moles of KClO3 = 25 g / 122.55 g/mol

moles of KClO3 = 0.2036 mol

Use the mole ratio from the balanced equation to find the number of moles of KCl produced:

moles of KCl = moles of KClO3 x (2 moles of KCl / 2 moles of KClO3)

moles of KCl = 0.2036 mol x (2/2)

moles of KCl = 0.2036 mol

Calculate the mass of KCl produced:

mass of KCl = moles of KCl x molar mass of KCl

mass of KCl = 0.2036 mol x 74.55 g/mol

mass of KCl = 15.18 g

Therefore, 15.18 grams of potassium chloride are produced if 25 grams of potassium chlorate decompose.

Alcohol is a compound with a hydroxyl (-OH) group attached to a carbon atom, such as CH₃OH. An acid is a compound with a carboxyl (-COOH) group, such as CH₃COOH.

An aldehyde is a compound with a carbonyl group (-CHO) attached to a carbon atom, such as CH₂O. An amine is a compound with a nitrogen atom attached to one or more carbon atoms, such as H₃CNH₂.

An alkene is a compound with a double bond between two carbon atoms, such as CH₂CH₂. An alkane is a compound with only single bonds between carbon atoms, such as C₃H₈.

The match of the following is as follows:

CHOH - alcohol -OH

CH₃COOH - acid -COOH

CH₂CH₂ - alkene -CH₂

CH₂O - aldehyde -O

H₃CNH₂ - amine -NH₂

C₃H₈ - alkane

To know more about the carbonyl group, visit:

https://brainly.com/question/13564853

#SPJ1