An unknown mass of silver is heated to a temp of 98. 75c and then placed into a calorimeter containing 250g of water st 6. 5c. The silver and the water reach thermal equilibrium at 23. 35c. What is the mass of the silver sample?

The final velocity of two cars that stick together after a collision is 18.5 m/s. The change in kinetic energy of the system is 322,505 J, and an inelastic collision occurred.

To solve this problem, we can use the principle of conservation of momentum, which states that the total momentum of a closed system remains constant if no external forces act on it.

First, we calculate the initial momentum of the system:

p_initial = m1 * v1 + m2 * v2

p_initial = 1250 kg * 20.0 m/s + 1610 kg * 8.0 m/s

p_initial = 40,000 kg m/s + 12,880 kg m/s

p_initial = 52,880 kg m/s

Next, we calculate the total mass of the system after the collision:

m_total = m1 + m2

m_total = 1250 kg + 1610 kg

m_total = 2860 kg

Since the two cars stick together after the collision, we can assume that they move as one object. Therefore, the final velocity of the two cars can be calculated as follows:

v_final = p_initial / m_total

v_final = 52,880 kg m/s / 2860 kg

v_final = 18.5 m/s

To calculate the change in kinetic energy of the system, we can use the formula:

ΔK = K_final - K_initial

The initial kinetic energy of the system can be calculated as:

K_initial = 1/2 * m1 * v1² + 1/2 * m2 * v2²

K_initial = 1/2 * 1250 kg * (20.0 m/s)² + 1/2 * 1610 kg * (8.0 m/s)²

K_initial = 400,000 J + 51,520 J

K_initial = 451,520 J

The final kinetic energy of the system can be calculated as:

K_final = 1/2 * m_total * v_final²

K_final = 1/2 * 2860 kg * (18.5 m/s)²

K_final = 774,025 J

Therefore, the change in kinetic energy of the system is:

ΔK = K_final - K_initial

ΔK = 774,025 J - 451,520 J

ΔK = 322,505 J

Since the total kinetic energy of the system is not conserved, and some of it is converted to other forms of energy such as heat and sound, we can conclude that an inelastic collision occurred in the system.

To know more about the kinetic energy refer here :

https://brainly.com/question/26472013#

#SPJ11

The absence of attractive or repulsive forces between gas molecules means that they are free to move independently and randomly. This results in the motion of gas particles being characterized by constant collisions and changes in direction and speed. Without any forces to constrain their movement, gas particles will continue to move until they collide with other particles or the walls of their container. This is what causes gases to fill up any container they are in, as their independent motion allows them to spread out evenly throughout the available space.

What is attractive force?

An attractive force is a force that pulls or draws two or more objects or particles towards each other. It is the opposite of a repulsive force, which pushes objects or particles away from each other.

Attractive forces can be observed in a variety of contexts, including gravity, electromagnetism, and intermolecular forces in chemistry. For example, the force of gravity between two objects is an attractive force that pulls them together, while the electromagnetic force between opposite charges is also an attractive force.

What is repulsive force?

A repulsive force is a force that pushes two or more objects or particles away from each other. It is the opposite of an attractive force, which pulls objects or particles towards each other.

Repulsive forces can be observed in a variety of contexts, including electromagnetism and intermolecular forces in chemistry. For example, the force between two like charges is repulsive, while the force between two like magnetic poles is also repulsive.

To know more about Gas molecules:

https://brainly.com/question/30597086

#SPJ11

The molarity of the 3% H2O2 solution is 0.0882 M.

To calculate the molarity of a solution, we need to know the moles of the solute (in this case, H2O2) and the volume of the solution.

First, we need to convert the percentage by mass to grams of H2O2:

If the solution is 3% H2O2 by mass, that means there are 3 grams of H2O2 in 100 grams of solution.

So for a certain mass of solution, we can calculate the mass of H2O2 using this proportion:

mass H2O2 / mass solution = 3 g H2O2 / 100 g solution

We can simplify this by assuming a mass of 100 g solution, which gives us:

mass H2O2 = 3 g H2O2 / 100 g solution * 100 g solution = 3 g H2O2

Now we can calculate the moles of H2O2:

The molar mass of H2O2 is 34.01 g/mol.

So the number of moles of H2O2 in 3 grams is:

moles H2O2 = 3 g H2O2 / 34.01 g/mol = 0.0882 mol H2O2

Assuming a volume of 1 liter of solution (which is the standard volume for molarity), we can calculate the molarity of the solution:

Molarity = moles of solute / volume of solution in liters

Molarity = 0.0882 mol / 1 L = 0.0882 M

Therefore, the molarity of the 3% H2O2 solution is 0.0882 M.

To know more about molarity  refer to-

https://brainly.com/question/8732513

#SPJ11

11.1 grams of calcium chloride should be dissolved in 500. 0mL of water to make a 0. 20 M solution of calcium chloride.

Molarity of a solution is defined as the number of moles of solute present in 1 litre of a solution.  1 mole of any substance is equal to 6.022× 10²³ atoms, ions or molecules present in it.

0.2M means 0.2mol CaCl₂/1L solution.

This question didn't give us a density of the solution so needs an assumption that the solution has equal volume to water.

x mol/0.5L=0.2M

x = 0.1

0.1 mol of CaCl₂ is needed. Ca=40g/mol, Cl=35.5g/mol.

CaCl₂ 0.1mol = (40+35.5×2)×0.1=11.1g

To know more about calcium chloride here

https://brainly.com/question/31427795

#SPJ4

A polyatomic ion is made of atoms that are covalently bonded together, which is true about polyatomic ions.

Covalent bonds form when electrons are shared between atoms. This contrasts with ionic bonds, where ions of opposite charges attract one another.

Polyatomic ions are covalently bonded molecules that contain an electrically charged atom or group of atoms. They can have either a positive or negative charge, and they are not usually found in their isolated form. Because they are charged, they have an impact on the chemistry of the surrounding substances.

An ion with more than one atom is called a polyatomic ion. There is one nitrogen atom and four hydrogen atoms in the ammonium ion. They all make up a single ion with the formula NH+4 and a charge of 1+. One carbon atom and three oxygen atoms make up the carbonate ion, which has a 2 overall charge.

Know more about polyatomic ion:

https://brainly.com/question/6689894

#SPJ11

The average atomic mass of element J is 79.854u as it determines the properties and behavior of the element in various chemical and physical processes.

To calculate the average atomic mass of element J, we need to use the formula:

Average atomic mass = (mass₁ × % abundance₁ + mass₂ x % abundance₂) ÷ 100

where mass₁ and mass₂ are the atomic masses of the two isotopes and % abundance₁ and % abundance₂ are their respective relative abundances.

Substituting the values given in the problem, we get:

Average atomic mass of J = (78.92u x 50.69% + 80.92u x 49.31%) ÷ 100

= (40.05148u + 39.80252u) ÷ 100

= 79.854u

To learn more about atomic follow the link:

brainly.com/question/5661976

#SPJ4

Answer:

yes acid can nuetralize bases

Answer:

Yes!

Explanation:

Strong Acids neutralize Strong bases.

When they react, water is formed. Whatever ions are left over, they become salt.

There must be an equal moles of strong acid and strong base.

To form 1.4 mol of ammonia, you need 0.7 mol of nitrogen.

Ammonia is formed by combining nitrogenand hydrogenin a 1:3 ratio, as shown in the balanced chemical equation:

N₂ + 3H₂ → 2NH₃

To determine the amount of nitrogen needed to form 1.4 mol of ammonia, follow these steps:

1. Identify the stoichiometry of the reaction: 1 mol N2 reacts with 3 mol H2 to produce 2 mol NH3.
2. Divide the desired amount of ammonia (1.4 mol) by the stoichiometric coefficient of ammonia (2 mol): 1.4 mol / 2 mol = 0.7.
3. Multiply the result (0.7) by the stoichiometric coefficient of nitrogen (1 mol): 0.7 x 1 mol = 0.7 mol.

Therefore, you need 0.7 mol of nitrogen to form 1.4 mol of ammonia.

To know more about balanced chemical equation click on below link:

https://brainly.com/question/28294176#

#SPJ11

ΔS> O contributes to spontaneity. This is the relationship between entropy and spontaneity. Therefore, the correct option is option D.

Entropy is a measureable physical characteristic and a scientific notion that is frequently connected to a condition of disorder, unpredictability, or uncertainty. From classical thermodynamics, where it was originally recognised, through the microscopic description of nature in statistical physics, to the fundamentals of information theory, the phrase and concept are employed in a variety of disciplines. It has numerous applications in physics and chemistry, biological systems and how they relate to life, cosmology, economics, sociology, weather science, and information systems, especially the exchange of information. ΔS> O contributes to spontaneity.

Therefore, the correct option is option D.

To know more about entropy, here:

https://brainly.com/question/20166134

#SPJ12

In chemistry, a chemical reaction can be classified as either endothermic or exothermic based on whether the reaction releases or absorbs energy, respectively. An endothermic reaction is one in which energy is absorbed from the surroundings, resulting in an increase in the internal energy of the system.

The term potential energy refers to the stored energy within a system due to the position or configuration of the particles that make up that system. In the case of a chemical reaction, potential energy is stored within the chemical bonds between atoms and molecules.

In an endothermic reaction, the reactants have less potential energy than the products. This is because energy is required to break the chemical bonds in the reactants, which absorbs energy from the surroundings. As a result, the products have higher potential energy than the reactants because they have absorbed energy from the surroundings during the reaction.

Examples of endothermic reactions include the process of melting ice, where energy is absorbed from the surroundings to break the bonds between water molecules, and the reaction between baking soda and vinegar, where energy is absorbed to break the bonds between the molecules of the reactants.

In summary, endothermic reactions are those that require energy to be absorbed from the surroundings. This results in the products of the reaction having more potential energy than the reactants, which have had their bonds broken and therefore have less potential energy.

To know more about endothermic  refer here

https://brainly.com/question/23184814#

#SPJ11

The complete reaction would be; 2 NaCl --> 2 Na + Cl2 + H

Energy is released when an exothermic process continues in the form of heat, light, or sound. In this way, the reactants' chemical bonds initially hold the energy, which is later released as the bonds are broken and new ones are formed.

Heat or other forms of energy are released as a result of the energy differential between the reactants and the reaction's products. In an exothermic process, energy is assumed to be on the side of the products.

Learn more about energy:https://brainly.com/question/26219779

#SPJ1

To prepare 97 g of H₂SO₄, 45.3 liters of 0.018 M H₂SO₄ solution would be required.

To calculate the volume of 0.018 M H₂SO₄ needed to contain 97 g of H₂SO₄, we first need to determine the number of moles of H₂SO₄ in 97 g. From the molar mass of H₂SO₄, we can calculate that 97 g is equivalent to 0.815 moles of H₂SO₄ .

Using the molarity of the H₂SO₄ solution (0.018 M), we can then calculate the volume of solution needed using the formula:

Volume = moles / molarity

Thus, the volume of 0.018 M H₂SO₄ needed to contain 97 g of H₂SO₄ is:

Volume = 0.815 moles / 0.018 M = 45.3 L (rounded to two decimal places).

Therefore, 45.3 liters of 0.018 M H₂SO₄ solution would be needed to contain 97 g of H₂SO₄.

To know more about the H₂SO₄ refer here :

https://brainly.com/question/4427738#

#SPJ11

The percent yield of KOH is 60.26%.

To calculate the percent yield, we first need to find the theoretical yield and then compare it with the actual yield. In this case, the actual yield is given as 75.00 grams.

1. Find moles of water (H2O):
40.0 g H2O × (1 mol H2O / 18.02 g H2O) = 2.2198 mol H2O

2. Use the balanced chemical equation to find moles of KOH:
H2O + KO → KOH + 1/2 H2
From the balanced equation, 1 mol of H2O produces 1 mol of KOH. Thus,
2.2198 mol H2O × (1 mol KOH / 1 mol H2O) = 2.2198 mol KOH

3. Find the theoretical mass of KOH:
2.2198 mol KOH × (56.11 g KOH / 1 mol KOH) = 124.44 g KOH

Now that we have the theoretical yield (124.44 g KOH) and the actual yield (75.00 g KOH), we can calculate the percent yield:

Percent Yield = (Actual Yield / Theoretical Yield) × 100
Percent Yield = (75.00 g KOH / 124.44 g KOH) × 100 = 60.26%

So, the percent yield of KOH is 60.26%.

To learn more about yield, refer below:

https://brainly.com/question/30700754

#SPJ11

Answer:

  3 L

Explanation:

You want to know the volume of water vapor produced at STP when 1 L of C₆H₆ reacts with oxygen.

The given balanced reaction equation tells us that 6 moles of water vapor are produced from each 2 moles of C₆H₆. At STP, the volume of water vapor will be 3 times the volume of C₆H₆.

3 liters of water vapor are produced by reacting 1 liter of C₆H₆ with oxygen.

The balanced oxidation-reduction reaction is 2Fe³⁺(aq) + 2Hg(l) + 2Cl⁻(aq) → 2Fe²⁺(aq) + Hg₂Cl₂(s).

The given oxidation-reduction reaction is: 2Fe³⁺(aq) + 2Hg(l) + 2Cl⁻(aq) → 2Fe²⁺(aq) + Hg₂Cl₂(s).

Here is a step-by-step explanation of the reaction:
1. Identify the oxidation and reduction half-reactions:
- Oxidation: Hg(l) → Hg²⁺ + 2e⁻ (loss of electrons)
- Reduction: Fe³⁺ + e⁻ → Fe²⁺ (gain of electrons)

2. Balance the half-reactions:
- Oxidation: 2Hg(l) → Hg₂²⁺ + 4e⁻ (multiplied by 2 to balance electrons)
- Reduction: 2Fe³⁺ + 2e⁻ → 2Fe²⁺ (already balanced)

3. Add the half-reactions together:
2Fe³⁺ + 2Hg(l) + 2e⁻ → 2Fe²⁺ + Hg₂²⁺ + 4e⁻

4. Cancel the electrons on both sides:
2Fe³⁺ + 2Hg(l) → 2Fe²⁺ + Hg₂²⁺

5. Combine the remaining ions to form the final products:
2Fe³⁺(aq) + 2Hg(l) + 2Cl⁻(aq) → 2Fe²⁺(aq) + Hg₂Cl₂(s)

So, the balanced oxidation-reduction reaction is 2Fe³⁺(aq) + 2Hg(l) + 2Cl⁻(aq) → 2Fe²⁺(aq) + Hg₂Cl₂(s).

To know more about reduction half-reactions:

https://brainly.com/question/2034122

#SPJ11

a) The temperature of the water in the beaker is likely to increase as heat flows from the metal to the water until they reach thermal equilibrium.

b) The metal will likely lose heat to the water until it reaches thermal equilibrium with the water.

a) The temperature of the water in the beaker is likely to increase due to the transfer of heat from the metal to the water. This process is known as conduction, and it occurs because heat always flows from hotter objects to cooler objects. The metal, being at a higher temperature than the water, will transfer heat to the water until both reach a state of thermal equilibrium.

b) The amount of heat lost by the metal will depend on its mass, specific heat capacity, and initial temperature. The metal may also undergo physical changes due to the change in temperature, such as contraction or expansion. The type of metal and its properties will influence how much it changes in response to the temperature change.

To learn more about temperature follow the link:

https://brainly.com/question/31273735

#SPJ4

1) The reason why other big molecules, such as complex carbohydrates, don't usually come out in the feces of healthy people is because they are broken down into smaller, absorbable units during the digestive process.

If big molecules can't get absorbed in the small intestine, why aren't there other big molecules besides fiber, like complex carbohydrates, coming out in the poop of healthy people:

Complex carbohydrates are broken down into simple sugars like glucose through the action of enzymes such as amylase, which is present in saliva and pancreatic secretions. These simple sugars can then be absorbed by the small intestine and used by the body for energy. In contrast, fiber cannot be broken down by human digestive enzymes, so it remains undigested and is eliminated in the feces.

2) What's happening to the other big molecules like complex carbohydrates? How can we explain why the amount of complex carbohydrates could be decreasing as food travels through the digestive system?

As food travels through the digestive system, complex carbohydrates are gradually broken down into smaller, absorbable units. This process begins in the mouth with the action of salivary amylase, which starts breaking down the complex carbohydrates into smaller units. As the food continues to the stomach and then to the small intestine, more enzymes, like pancreatic amylase, are secreted to further break down the complex carbohydrates into simple sugars. These simple sugars are then absorbed by the small intestine and enter the bloodstream, where they can be used for energy or stored for later use. This is why the amount of complex carbohydrates decreases as food travels through the digestive system.

To know more about digestive system:

https://brainly.com/question/29694477

#SPJ11

The pH value of the mentioned solution is calculate out being  2.76. The percent ionization of the acid is calculate being nearly 3.8%. And the Ka value of the acid is found out to be  1.75×10⁻³.

In the way to get pH of the solution, we ar needed to utilize the formula:

pH = -log[H⁺]

here, [H⁺] is defined as the concentration of the hydrogen ion in moles per liter (M).

As per given [H⁺] = 1.75×10⁻³ M, we have:

pH = -log(1.75×10⁻³) = 2.76

Therefore, the pH of the mentioned solution is found out being 2.76.

In order to calculate the percent ionization of the acid, we can utilize the formula: % ionization = [H⁺] / [HA] × 100%

( [HA] is the initial concentration of the acid in moles per liter (M))

The [HA] can be calculated using the information that the solution is 0.0460 M, so:

[HA] = 0.0460 M

% ionization = [H⁺] / [HA] × 100% = (1.75×10⁻³ / 0.0460) × 100% ≈ 3.8%

Therefore, the percent ionization of the acid is calculate being nearly 3.8%.

To get the Ka value of the acid, we can use the expression:

Ka = [H⁺]² / [A⁻]

Here, [A⁻] is the concentration of the conjugate base of the acid in moles every liter (M).

The presented acid is a weak acid, so it dissociates according to the equation:

HA ⇌ H⁺ + A⁻

From this equation above , we can find and get that the initial concentration of the conjugate base [A⁻] calculated being almost equal to the concentration of the hydrogen ion [H⁺] because the acid is only slightly ionized. Therefore, we have: [A⁻] = [H⁺] = 1.75×10⁻³ M

putting it in this in order to find Ka, we will get:

Ka = [H⁺]² / [A⁻] = (1.75×10⁻³)² / (1.75×10⁻³) = 1.75×10⁻³. Hence, the Ka value of the acid is calculated being 1.75×10⁻³.

Learn more about Ionization :

https://brainly.com/question/1602374

The complete question is :

A 0.0460 M solution of an organic acid has an [H⁺] of 1.75×10⁻³ M . Using the values above, calculate the pH of the solution. What is the percent ionization of the acid? Calculate the Ka value of the acid.

The difference in the rate of sugar and acid reaction to the reaction between KI(aq) and Pb(NO₃)₂(aq) can be explained by the type of chemical bonding present in each case. In the case of sugar and acid, the reaction is a covalent bond breaking and forming process that occurs gradually and can take time to complete.

Covalent bonds are relatively strong and require more energy to break, which can result in slower reaction rates.

On the other hand, the reaction between KI(aq) and Pb(NO₃)₂(aq) involves the formation and breaking of ionic bonds. Ionic bonds are relatively weaker than covalent bonds and require less energy to break, resulting in faster reaction rates.

Additionally, the presence of water in the reaction between KI(aq) and Pb(NO₃)₂(aq) can also speed up the reaction by facilitating the movement of ions and increasing their collision frequency.

To know more about the Covalent bonds refer here :

https://brainly.com/question/19382448#

#SPJ11

The structure of trehalose can be determined based on its chemical formula, [tex]C12H22O11[/tex], and the fact that it only forms D-glucose upon hydrolysis.

Trehalose is a disaccharide composed of two glucose molecules linked by an alpha-1,1 glycosidic bond. This means that the glucose molecules are joined together through their first and first carbon atoms, respectively. The structure can be written as:

[tex]HOCH2(CHOH)4α-D-Glc-(1→1)-α-D-Glc-CH2OH[/tex]

where [tex]"α-D-Glc"[/tex] represents a glucose molecule in its alpha configuration.

To visualize the structure, we can draw it in a condensed form, where the two glucose molecules are shown connected by a straight line:

[tex]HOCH2(CHOH)4α-D-Glc-(1→1)-α-D-Glc-CH2OH[/tex]

To know more about chemical formula refer to-

https://brainly.com/question/31713710

#SPJ11

You need to add 0.405 moles of CH₃NH₃Cl to 200.0 mL of 0.500 M CH₃NH₂ to create a buffer with a pH of 11.

To find the moles of CH₃NH₃Cl needed, you'll need to use the Henderson-Hasselbalch equation and the given information.

The Henderson-Hasselbalch equation is pH = pKa + log([A⁻]/[HA]).

First, calculate pKa using the given Kb value for CH₃NH₂:

pKa = -log(Ka)

= -log(Kw/Kb)

= -log(1.0 × 10⁻¹⁴ / 4.4 × 10⁻⁴)

= 10.36.

Then, plug in the desired pH (11) and the given concentrations of CH₃NH₂ (0.500 M):

11 = 10.36 + log([CH₃NH₃Cl]/[0.500]).

Solving for [CH₃NH₃Cl], you get [CH₃NH₃Cl] = 0.405 M.

Finally, multiply this concentration by the volume of the solution in liters (0.200 L) to find the moles of CH₃NH₃Cl needed: 0.405 M × 0.200 L = 0.405 moles.

To know more about Henderson-Hasselbalch equation click on below link:

https://brainly.com/question/13423434#

#SPJ11

The Ksp of NaCl when it begins to crystallize out of a 6.07 M solution is approximately 36.84.

To calculate the Ksp of NaCl in this solution, follow these steps:
1. Identify the balanced dissociation equation: NaCl(s) ↔ Na+(aq) + Cl-(aq).
2. Since NaCl dissociates into a 1:1 ratio, the concentrations of Na+ and Cl- are equal to the initial concentration, 6.07 M.
3. Determine the Ksp expression: Ksp = [Na+][Cl-].
4. Substitute the concentrations into the expression: Ksp = (6.07)(6.07) ≈ 36.84.

In this scenario, the Ksp value represents the point at which NaCl begins to crystallize from the solution. The Ksp increases as more solute precipitates, which reflects the equilibrium between dissolved and solid NaCl.

To know more about dissociation equation click on below link:

https://brainly.com/question/30983331#

#SPJ11

Answer:To find the number of CO2 molecules in a 0.25 g sample of dry ice, we can use the Avogadro's number and the molar mass of CO2.The molar mass of CO2 is:12.01 g/mol (C) + 2(16.00 g/mol) (O) = 44.01 g/molThis means that 1 mole of CO2 contains 6.022 x 10^23 molecules.To find the number of moles in 0.25 g of CO2, we can use the molar mass:0.25 g / 44.01 g/mol = 0.005681 molFinally, we can use Avogadro's number to find the number of CO2 molecules:0.005681 mol x 6.022 x 10^23 molecules/mol = 3.422 x 10^21 CO2 moleculesTherefore, a 0.25 g sample of dry ice contains approximately 3.422 x 10^21 CO2 molecules.

Using an ice bath to cool the solution is most likely to reduce the concentration of sodium chloride in the solution. Option D is correct.

When a solution is cooled, the solubility of most solids decreases. As a result, some of the sodium chloride may precipitate out of the solution, reducing the concentration of the solute. The other options listed would not reduce the concentration of sodium chloride in the solution.

Heating the solution on a hot plate could potentially increase the solubility of sodium chloride and lead to more dissolving, whereas adding more sodium chloride would only increase the concentration. Removing some solution with a pipette would not change the concentration, as the amount of solute would remain the same in the remaining solution. Hence Option D is correct.

To learn more about concentrations, here

https://brainly.com/question/10725862

#SPJ4

The percent ionization of a 0.593 M acetylsalicylic acid solution is 1.85%.

What is percent ionization?

Percent ionization measures how much a weak acid or base ionizes in solution. It is represented as a percentage of the concentration of the ionized form of the acid or base to the starting concentration of the acid or base.

The acid dissociation constant, Ka, is used to compute the percentage of ionization of a weak acid such as acetylsalicylic acid (aspirin). Acetylsalicylic acid's Ka expression is:

Ka = [H+][[tex]C_{9}H_{7}O_{4}[/tex]-]/[[tex]HC_{9}H_{7} O_{4}[/tex]]

[H+] = concentration of hydrogen ions

[[tex]C_{9} H_{7} O_{4}[/tex]-] = concentration of the conjugate base,

[[tex]HC_{9} H_{7} O_{4}[/tex]] = concentration of the acid.

Given the molarity of the solution, we must first calculate the acid concentration, which is:

[[tex]HC_{9} H_{7} O_{4}[/tex]] = 0.593 M

The next step is to suppose that the acid's % ionization is low, which means that the acid's dissociation concentration is minimal in comparison to the acid's original concentration. This presumption lets us assume that the concentration of [[tex]HC_{9} H_{7} O_{4}[/tex]] in the denominator is equivalent to the acid's original concentration.

Therefore, the Ka expression can be rewritten as follows:

Ka = [H+][[tex]C_{9} H_{7} O_{4}[/tex]-]/0.593 M

The concentration of the dissociated acid is equal to the concentration of the conjugate base at equilibrium, i.e., [[tex]C_{9} H{7} O_{4}[/tex]-] = [H+]. This is another fact we are aware of.

With this in the Ka expression and the [H+] equation solved, the following result is obtained:

[tex][H+]^{2}[/tex] = Ka x 0.593 M

[H+] = [tex]\sqrt{(Ka X 0.593 M)}[/tex]

Using the Ka value for acetylsalicylic acid (Ka = 3.3 x [tex]10^{-4}[/tex]) and substituting, we get:

[H+] = [tex]\sqrt{(3.3 X 10^{-4} X 0.593) }[/tex]

       = 0.011 M

Therefore, the percent ionization of acetylsalicylic acid is:

%  ionization = ([H+] / [[tex]HC_{9} H_{7} O_{4}[/tex]]) x 100

                       = (0.011 M / 0.593 M) x 100

                       = 1.85%

Therefore, 1.85% of an acetylsalicylic acid solution with a concentration of 0.593 M is ionized. This indicates that, at equilibrium, just a small proportion of the acid molecules have split into ions.

Learn more about percent ionization from the given link.

https://brainly.com/question/18915082

#SPJ4

The empirical formula of a compound made up of 94.5 g of aluminum and 199.5 g of fluorine is AlF₃.

To determine the empirical formula of the compound, we need to first calculate the moles of each element present in the sample.

Moles of aluminum = 94.5 g / 26.98 g/mol = 3.50 mol

Moles of fluorine = 199.5 g / 18.99 g/mol = 10.51 mol

Next, we need to determine the smallest whole number ratio between these two values.

Dividing both values by 3.50, we get:

Moles of aluminum = 1

Moles of fluorine = 3

Therefore, the empirical formula of the compound is AlF₃.

To know more about the empirical formula refer here :

https://brainly.com/question/14425592#

#SPJ11

The volume occupied by 3.67 moles of H₂ gas at STP is 82.19 L.

To calculate the volume, we use the equation V = n × Vm, where V is the volume, n is the number of moles, and Vm is the molar volume of a gas at STP (22.4 L/mol). At STP (standard temperature and pressure), one mole of any gas occupies 22.4 L. Given that we have 3.67 moles of H₂ gas, we can calculate the volume as follows:

1. Identify the number of moles (n): 3.67 moles of H₂
2. Find the molar volume of a gas at STP (Vm): 22.4 L/mol
3. Use the equation V = n × Vm
4. Substitute the values: V = 3.67 moles × 22.4 L/mol
5. Calculate the volume: V = 82.19 L

Therefore, 3.67 moles of H₂ gas occupy 82.19 L at STP.

To know more about STP click on below link:

https://brainly.com/question/24050436#

#SPJ11

The enthalpy of the reaction can be obtained as 118 kJ/mol.

Reaction enthalpy, also known as heat of reaction or ΔHrxn, is the change in enthalpy that occurs during a chemical reaction. It is defined as the difference between the enthalpy of the products and the enthalpy of the reactants.

We have;

Enthalpy of reaction = Bonds broken - Bonds formed

Enthalpy of reaction = [4(413) + 2(495) - [2(799) + 2(463)

= [1652 + 990] - [1598 + 926]

=2642 - 2524

= 118 kJ/mol

Learn more about enthalpy:https://brainly.com/question/1657608

#SPJ1

Answer:

Niobium (Columbium)

Explanation:

Specific heat capacity has the units J/(kg °C). To find the heat capacity, all we need to do is organize the values so the units match up.

1200 J / (0.03 kg * 150°C) = 266.67 or 267 J/(kg °C)

The closest metal to a 267 heat capacity is Niobium I believe.

The addition of NaCl(aq) will not affect the concentration of Ag₂CO₃(s) because it is a solid and its concentration remains constant.

The addition of NaCl(aq) will introduce Cl⁻ ions into the solution, which can react with Ag+ ions to form the sparingly soluble salt AgCl(s):

Ag⁺(aq) + Cl⁻(aq) ⇆ AgCl(s)

This reaction will shift the equilibrium of the original reaction to the right, according to Le Chatelier's principle, in order to counteract the increase in Ag⁺ ions. As a result, more Ag⁺ ions will be produced from the dissociation of Ag₂CO₃(s), causing its concentration to remain constant, and more CO₃⁻²(g) ions will be consumed, decreasing their concentration. Therefore, the concentration of Ag⁺(aq) will increase, while the concentration of CO₃⁻²(g) will decrease.

To learn more about concentration follow the link:

brainly.com/question/10725862

#SPJ4