A horizontal uniform meter stick is supported at the 50.0 cm mark. It has a mass of 0.52 kg, hanging from it at the 20.0 cm mark and a mass of 0.31 kg mass hanging from the 60.0 cm mark. Determine the position on the meter stick, at which one would hang a third mass of 0.61 kg, to keep the meter stick in balance. Group of answer choices

Answers

Answer 1

Answer: 70.5 cm

Explanation:

The position on the meter stick, at which one would hang a third mass of 0.61 kg, to keep the meter stick in balance will be at the side of 0.31kg.

You will use the moment techniques.

That is,

Sum of the clockwise moment = sum of anticlockwise moments

Please find the attached file for the remaining explanation and solution.

A Horizontal Uniform Meter Stick Is Supported At The 50.0 Cm Mark. It Has A Mass Of 0.52 Kg, Hanging

Related Questions

When a nerve cell depolarizes, charge is transferred across the cell membrane, changing the potential difference. For a typical nerve cell, 9.0 pC of charge flows in a time of 0.50 ms. Part A What is the average current

Answers

Answer:

1.8 x 10^-8A

Explanation:

Using the equation for current:

I= Q/t

current = (9X10^-12)/ (0.50X 10^-3)

= 1.8^-8A

The velocity selector in in a mass spectrometer consists of a uniform magnetic field oriented at 90 degrees to a uniform electric field so that a charge particle entering the region perpendicular to both fields will experience an electric force and a magnetic force that are oppositely directed. If the uniform magnetic field has a magnitude of 37.8 ~\text{mT}37.8 mT, then calculate the magnitude of the electric field that will cause a proton entering the velocity selector at 40.640.6 km/s to be undeflected. Give your answer in units of kV/m.

Answers

Answer:

50k/h is the answer to iy

A platinum wire is used to determine the melting point of indium. The resistance of the platinum wire is 2.000 Ω at 20°C and increases to 3.072 Ω as indium starts to melt. What is the melting point of indium? (The temperature coefficient of resistivity for platinum is 3.9 ×

Answers

Answer:

The melting point of indium is 157.436 degrees Celsius.

Explanation:

The resistance of the platinum wire, R1 = 2

The temperature at R1 is, T1 = 20 degrees Celsius.

The increased resistance, R2 = 3.072

Let the temperature at 3.072 = T2

Now find the temperature at which the indium starts melting.

We know that α = ( R2 - R1 ) / [ R1 × ( T2 - T1 ) ]

Given, α = 3.9 x 10^-3/ degrees Celsius.

T2- T1   = ( R2 - R1 ) / R1 α

T2 – T1 = (3.072 – 2) / (2 × 3.9 x 10^-3)

T2 – T1 = 137.436

T2 = T1 + 137.436

T2 =  20 + 137.436

T2 = 157.436 degree Celsius

Answer:

1,772  C

Explanation:

Match the followings.

a. The current is induced when there is ________ magnetic flux through a closed loop of wire.
b. If the magnetic flux was constant then there __________ induced current regardless of the magnetic flux value.
c. If the magnetic flux was not constant then there ________ induced current regardless of the magnetic flux value.

1. a constant
2. a strictly decreasing
3. either decreasing or Increasing
4. will be
5. will be no
6. a strictly Increasing

Answers

Answer:

a. The current is induced when there is ____3. EITHER DECREASING OR INCREASING___ magnetic flux through a closed loop of wire.

b. If the magnetic flux was constant then there _______WILL BE NO___ induced current regardless of the magnetic flux value.

c. If the magnetic flux was not constant then there __WILL BE______ induced current regardless of the magnetic flux value.

Explanation:

THIS IS BECAUSE IF FARADAY'S LAW OF ELECTROMAGNETIC INDUCTION WHICH STATES THAT WHENEVER THERE IS A CHANGE IN MAGNETIC LINES OF FORCE LINKED WITH A CLOSED CIRCUIT AN EMF IS INDUCED

An automobile of mass 2500 kg moving at 49.4 m/s is braked suddenly with a constant braking force of 8,868 N. How far does the car travel before stopping

Answers

Answer:

344.68 m

Explanation:

The computation of the far does the car travel before stopping is

Data provided in the question

Force = F = 8,868 N

mass = m = 2,500 kg

So,

accleration = a is

[tex]= \frac{-F}{m}\\\\\= \frac{8868}{2500}[/tex]

a = -3.54 m/s^2

The initial speed = u = 49.4 m / s

final speed = v = 0

Based on the above information

Now applying the following formula

v^ 2- u^ 2= 2aS

Therefore

[tex]S = \frac{v^ 2- u^ 2}{2a}\\\\\ = \frac{0- 49.4^ 2}{2\times -3.54}[/tex]

= 344.68 m

Why does front side of spoon forms inverted image but the back side form opposite of inverted image?

Answers

Answer:

our face is outside the focal length of the concave side of the spoon. We see a virtual inverted image whereas in case of concave mirror we can see a virtual image which is erect.

The wave number (k) and the angular frequency of a wave are 6.2rad/m and 12rad/s respectively. Which of the followings could be the equation of the wave?
a. 8sin(12x-6.2t)
b. 8sin(6.2x-12t)
c. 12 sin (6.2x-8t)
d. all of the above

Answers

Answer:

B. [tex]8sin(6.2x-12t)[/tex]

Explanation:

The general equation of a wave is expressed as [tex]y = Asin(kx-\omega t)[/tex]

A is the amplitude of the wave

k is the wave number and it is expressed as [tex]k =\frac{2\pi}{\lambda}[/tex]

[tex]\omega[/tex] is the angular frequency expressed as [tex]\omega = 2\pi f[/tex]

[tex]\lambda[/tex] is the wavelength and f is the angular frequency

Given k = 6.2rad/m and [tex]\omega = 12rad/s[/tex]

On substituting this value into the general wave equation;

[tex]y = Asin(kx-\omega t)\\y = Asin(6.2x-12t)[/tex]

From the expression gotten, the only equation that could be the equation of the wave is [tex]y = 8sin(6.2x-12t)[/tex]

The speed of sound in air is 340 m/s, and the density of air is 1.2 kg/m3. If the displacement amplitude of a 330-Hz sound wave is 14 µm, what is its pressure-variation amplitude?

Answers

I bel.ieve the answer is 279Ghz

The required value of pressure-variation amplitude of the given sound wave is 11.84 Pa.

Given data:

The speed of sound in air is, v = 340 m/s.

The density of air is, [tex]\rho = 1.2 \;\rm kg/m^{3}[/tex].

The frequency of sound wave is, f = 330 Hz.

The displacement amplitude of sound wave is, [tex]A = 14 \;\rm \mu m= 14 \times 10^{-6} \;\rm m[/tex].

The standard expression for the pressure variation amplitude for the sound wave propagating in air medium is,

[tex]\Delta P= B \times A \times K[/tex]

Here,

B is the Bulk Modulus and its value is, [tex]B = \rho \times v^{2}[/tex].

K is the wave form constant and its value is, [tex]K = \dfrac{2 \pi f}{v}[/tex].

Solving as,

[tex]\Delta P= (\rho \times v^{2}) \times A \times \dfrac{2 \pi f}{v}\\\\\Delta P= (\rho \times v) \times A \times (2 \pi f)\\\\\Delta P= (1.2 \times 340) \times (14 \times 10^{-6}) \times (2 \pi \times 330)\\\\\Delta P= 11.84 \;\rm Pa[/tex]

Thus, we can conclude that the required value of pressure-variation amplitude of the given sound wave is 11.84 Pa.

Learn more about the pressure-variation amplitude here:

https://brainly.com/question/13091615

a box container both cube and five side pyramid the total number of objects is 17 the total number of side for the cube and pyramid is 95 how many cubes are in the box​

Answers

Answer:

There are 10 cubes in the box

Explanation:

Let the total number of cubes be x and the total number of pyramids be y

Since there are 17 total objects;

Then;

x + y = 17 •••••••••(i)

Also, the total number of sides of cubes is 6 * x = 6x ( a single cube has 6 sides)

For the pyramid we have 5 * y = 5y

adding both gives the total number of sides

6x + 5y = 95 •••••• (ii)

From i, we cabs say y = 17-x

plug this in ii

6x + 5(17-x) = 95

6x + 85 -5x = 95

6x-5x = 95-85

x = 10

The electric field of a sinusoidal electromagnetic wave obeys the equation E = (375V /m) cos[(1.99× 107rad/m)x + (5.97 × 1015rad/s)t].
(a) What is the speed of the wave?
(b) What are the amplitudes of the electric and magnetic fields of this wave?
(c) What are the frequency, wavelength, and period of the wave? Is this light visible to humans?

Answers

Answer:

a)  v = 2,9992 10⁸ m / s , b)  Eo = 375 V / m ,  B = 1.25 10⁻⁶ T,

c)     λ = 3,157 10⁻⁷ m,   f = 9.50 10¹⁴ Hz ,  T = 1.05 10⁻¹⁵ s , UV

Explanation:

In this problem they give us the equation of the traveling wave

        E = 375 cos [1.99 10⁷ x + 5.97 10¹⁵ t]

a) what the wave velocity

all waves must meet

        v = λ f

In this case, because of an electromagnetic wave, the speed must be the speed of light.

        k = 2π / λ

        λ = 2π / k

        λ = 2π / 1.99 10⁷

        λ = 3,157 10⁻⁷ m

        w = 2π f

        f = w / 2 π

        f = 5.97 10¹⁵ / 2π

        f = 9.50 10¹⁴ Hz

the wave speed is

        v = 3,157 10⁻⁷   9.50 10¹⁴

        v = 2,9992 10⁸ m / s

b) The electric field is

           Eo = 375 V / m

to find the magnetic field we use

           E / B = c

           B = E / c

            B = 375 / 2,9992 10⁸

            B = 1.25 10⁻⁶ T

c) The period is

           T = 1 / f

            T = 1 / 9.50 10¹⁴

            T = 1.05 10⁻¹⁵ s

the wavelength value is

          λ = 3,157 10-7 m (109 nm / 1m) = 315.7 nm

this wavelength corresponds to the ultraviolet

To test the resiliency of its bumper during low-speed collisions, a 2 010-kg automobile is driven into a brick wall. The car's bumper behaves like a spring with a force constant 4.00 106 N/m and compresses 3.18 cm as the car is brought to rest. What was the speed of the car before impact, assuming no mechanical energy is transformed or transferred away during impact with the wall?

Answers

Answer:

Vi = 2 m/s

Explanation:

First we find the force applied to the car by wall to stop it. We use Hooke's Law:

F = kx

where,

F = Force = ?

k = spring constant = 4 x 10⁶ N/m

x = compression = 3.18 cm = 0.0318 m

Therefore,

F = (4 x 10⁶ N/m)(0.0318 m)

F = 127200 N

but, from Newton's Second Law:

F = ma

a = F/m

where,

m = mass of car = 2010 kg

a = deceleration = ?

Therefore,

a = 127200 N/2010 kg

a = 63.28 m/s²

a = - 63.28 m/s²

negative sign due to deceleration.

Now, we use 3rd equation of motion:

2as = Vf² - Vi²

where,

s = distance traveled = 3.18 cm = 0.0318 m

Vf = Final Speed = 0 m/s

Vi = Initial Speed = ?

Therefore,

2(- 63.28 m/s²)(0.0318 m) = (0 m/s)² - Vi²

Vi = √4.02 m²/s²

Vi = 2 m/s

Consider an electromagnetic wave where the electric field of an electromagnetic wave is oscillating along the z-axis and the magnetic field is oscillating along the x-axis.
In what directions is it possible that the wave is traveling?
A. The-z direction.
B. The ty direction
C. The +x direction.
D. The -y direction
E. The -x direction.
F. The +z direction.

Answers

Answer:

The wave will be travelling in the y-axis

Explanation:

An e-m wave has a spatially varying electric field that is always associated with a magnetic field that changes over time and vice versa. The electric field and the magnetic field oscillates perpendicularly to each other, and together form a wave that travels in a perpendicular direction to the magnetic and the electric field in space. The movement of the e-m wave through space is usually away from the source where it is generated. So, if the electric field travels in the z-axis, and the magnetic field travels through along the x-axis, then the e-m wave generated will travel in the y-axis direction.

A 0.10 kg point mass moves in a circular path with a radius of 0.36 m with a net force of 10.0 N toward the center of the circle. Select all of the following that are true statements.

a. The velocity of the object is 6 m/s toward the center of the circle.
b. The speed of the object is 6 m/s and decreasing.
c. The speed of the object is 6 m/s and increasing.
d. The velocity of the object is a constant 6 m/s.
e. The speed of the object is a constant 6 m/s.

Answers

Answer:

e. The speed of the object is a constant 6 m/s

Explanation:

Since the net force is towards the centre , hence there is no tangential acceleration . Only centripetal acceleration is there . Hence point mass is moving with uniform speed . Let it be u .

Centripetal force = m v² / r , r is radius of circular path .

Putting the given values

.10 x v² / .36 = 10

v = 6 m /s

A bullet with a mass of 20 g and a speed of 960 m/s strikes a block of wood of mass 4.5 kg resting on a horizontal surface. The bullet gets embedded in the block. The speed of the block immediately after the collision is:________.
A) cannot be found because we don't know whether the surface is frictionless.
B) is 0.21 km/s.
C) is 65 m/s.
D) is 9.3 m/s.
E) None of these is correct

Answers

Answer:

4.25m/sE. None of the option is correct

Explanation:

Using the law of conservation of momentum to solve the problem. According to the law, the sum of momentum of the bodies before collision is equal to the sum of the bodies after collision. The bodies move with the same velocity after collision.

Mathematically.

mu + MU = (m+M)v

m and M are the masses of the bullet and the block respectively

u and U are their respective velocities

v is their common velocity

from the question, the following parameters are given;

m = 20g = 0.02kg

u = 960m/s

M = 4.5kg

U =0m/s (block is at rest)

Substituting this values into the formula above to get v;

0.02(960)+4.5(0) = (0.02+4.5)v

19.2+0 = 4.52v

4.52v = 19.2

Dividing both sides by 4.52

4.52v/4.52 = 19.2/4.52

v = 4.25m/s

Since they have the same velocity after collision, then the speed of the block immediately after the collision is also 4.25m/s

Rank in order, from largest to smallest, the magnitudes of the electric field at the black dot. A. 2, 1, 3, 4 B. 1, 4, 2, 3 C. 3, 2, 1, 4 D. 3, 1, 2, 4

Answers

Given that,

Rank in order from largest to smallest the magnitude of the electric field at block dot.

Electric field :

Electric field is proportional to the charge divided by square of distance.

In mathematically,

[tex]E\propto\dfrac{q}{r^2}[/tex]

Where, q = charge

r = distance

If the charge is greater then electric field will be greater.

If the distance is greater then electric field will be smaller.

We need to find the electric field at black dot

According to figure,

(I). The electric field at black dot due to positive charge point q to left. the distance is r.

The electric field will be

[tex]E=\dfrac{kq}{r^2}[/tex]

The electric field will be largest.

(II). The electric field at black dot due to positive charge point 2q to left. The distance is 2r.

Then, the electric field will be

[tex]E=\dfrac{k2q}{(2r)^2}[/tex]

[tex]E=\dfrac{kq}{2r^2}[/tex]

The electric field will be smallest.

(III).  The electric field at black dot due to positive charge point 2q to left. The distance is r.

Then, the electric field will be

[tex]E=\dfrac{k2q}{(r)^2}[/tex]

The electric field will be very largest.

(IV). The electric field at black dot due to positive charge point q to left. The distance is 2r.

Then, the electric field will be

[tex]E=\dfrac{kq}{(2r)^2}[/tex]

[tex]E=\dfrac{kq}{4r^2}[/tex]

The electric field will be very smallest.

So, The electric field from largest to smallest will be

[tex]E_{3}>E_{1}>E_{2}>E_{4}[/tex]

Hence, The ranking will be 3, 1, 2, 4.

(D) is correct option.

Two stars of masses M and 6M are separated by a distance D. Determine the distance (measured from M) to a point at which the net gravitational force on a third mass would be zero.

Answers

Answer:

0.29D

Explanation:

Given that

F = G M m / r2

F = GM(6m) / (D-r)2

G Mm/r2 = GM(6m) / (D-r)2

1/r2 = 6 / (D-r)2

r = D / (Ö6 + 1)

r = 0.29 D

See diagram in attached file

A certain shade of blue has a frequency of 7.06×1014 Hz. What is the energy E of exactly one photon of this light? Planck's constant h=6.626×10−34 J⋅s.

Answers

Answer:

Energy, [tex]E=4.67\times 10^{-19}\ J[/tex]

Explanation:

It is given that,

Frequency of blue shade is, [tex]f=7.06\times 10^{14}\ Hz[/tex]

We need to find the energy of exactly one photon of this light. The formula that is used to find the energy of photon is given by :

[tex]E=nhf[/tex]

Here, n is number of photon, n = 1

h is Planck's constant

So,

[tex]E=1\times 6.626\times 10^{-34}\times 7.06\times 10^{14}\\\\E=4.67\times 10^{-19}\ J[/tex]

So, the energy of this light is [tex]4.67\times 10^{-19}\ J[/tex].

define the term DNA​

Answers

Answer:

It is the carrier of genetic information.

DNA is the short form for deoxyribonucleic acid. DNA is the main component in chromosomes and contains genetic information.

Two parallel wires run in a north-south direction. The eastern wire carries 15.0 A northward while the western wire carries 6.0 A northward. If the wires are separated by 30 cm, what is the magnetic field magnitude and direction at a point between the wires at a distance of 10 cm from the western wire?

Answers

Answer:

The magnitude  and direction of the  magnetic field is 2.7 x 10⁻⁵ T upwards

Explanation:

Given;

current in the eastern wire, [tex]I_e[/tex] = 15 A

current in the western wire, [tex]I_w[/tex] = 6 A

distance between the wires, d = 30 cm = 0.3 m

The magnetic field at a distance R from a line current I, is given as;

[tex]B = \frac{\mu_o I }{2 \pi R}[/tex]

The magnetic field between the wires, are in opposite directions, and since the currents are also in opposite directions, the magnetic fields of the wires will be added.

The total field = magnetic field (east) + magnetic field (west);

[tex]B = \frac{\mu_o I_e}{2 \pi R_e} + \frac{\mu_0 I_w}{2 \pi R_w} \\\\B = \frac{\mu_o}{2\pi} (\frac{I_e}{R_e} + \frac{I_w}{R_w})[/tex]

where;

[tex]R_w[/tex] is the distance of the field from west = 10cm = 0.1 m

[tex]R_e[/tex] is the distance of the field on east from west = d - 10cm = 30cm - 10cm = 20cm = 0.2 m

The total magnetic field is;

[tex]B = \frac{\mu_o}{2\pi} (\frac{I_e}{R_e} + \frac{I_w}{R_w})\\\\B = \frac{4\pi *10^{-7}}{2\pi} (\frac{15}{0.2} + \frac{6}{0.1})\\\\B = 2*10^{-7}(75 + 60)\\\\B = 2*10^{-7}(135)\\\\B = 2.7*10^{-5} \ T[/tex]

Since total magnetic field is positive, the direction of the field is upwards (positive y direction)

Therefore, the magnitude  and direction of the  magnetic field is 2.7 x 10⁻⁵ T upwards

1 A diffraction grating has a spacing of 1.6 10-m.
A beam of light is incident normally on the
grating. The first order maximum makes an angle
of 20° with the undeviated beam.what is wavelength of the incident light

Answers

Please answer please please thank you thank

A circular loop in the plane of a paper lies in a 0.75 T magnetic field pointing into the paper. The loop's diameter changes from 18.0 cm to 6.8 cm in 0.46 s.
A) Determine the direction of the induced current and justify your answer.
B) Determine the magnitude of the average induced emf.
C) If the coil resistance is 2.5 Ω, what is the average induced current?

Answers

Answer:

Explanation:

A.the direction of induced current will be clockwise

B: Changing 18cm and 6.8cm into 0.18m and 0.68

2.5

Divide them both by 2 to find the radius . Now we have 0.09 and .034m.

Now use Φ=(π*0.09^2)(.75 T)cos0 and the 0.019wb

(π*0.034^2)(.75 T)cos0 and the 0.00272wb

ow use ε=-N(ΔΦ/Δt)

For ΔΦ, 0.091-0.0027=0.0883

C.

To find the current, use I=ε/R

0.0883/2.5= 0.035A

For this study, the researcher is analyzing data by using __________ measures. A. experimental B. qualitative C. quantitative D. naturalistic

Answers

Answer:

B. qualitative

Explanation:

Since in the question it is mentioned that it takes the teacher opinion with respect to the student lunchroom that arranged the opinion in four classifications and according to that the report is also written

So this research represents the quality of the data collected as it does not specify the rating in terms of liking the student lunchroom

Therefore the correct option is B. qualitative

What would you predict would occur if you were able to
place a rotating magnet near a coil of wire?

Answers

A continually rotating magnetic field would continuously induce current, the induced current would show alternating direction

Will occur if you were able to place a rotating magnet near a coil of wire is continually rotating magnetic field would continuously induce current.

When is the operator faster approaching or moving away from the magnetic flux?

When the magnet moves close to the coil or rapidly increasing until the magnet is within the flux of the coil. As it passes through the coil, the magnetic flux through the coil starts to decrease. Consequently, an induced EMF is inverted.

Whenever there is a relative movement between the loop and the magnet, regardless of who moves, an electric current, called induced current, appears in the loop.

See more about magnet at brainly.com/question/13026686

Astronauts increased in height by an average of approximately 40 mm (about an inch and a half) during the Apollo-Soyuz missions, due to the absence of gravity compressing their spines during their time in space. Does something similar happen here on Earth

Answers

Answer:

Yes. Something similar occurs here on Earth.

Explanation:

Gravity tends to pull objects perpendicularly to the ground. In space, the absence of this force means there is no compression on the spine due to gravity trying to pull it down. This means that astronauts undergo an increase in height in space.

Here on Earth, we experience gravity pull on our spine during the day. At night when we sleep, we lie down with our spine parallel to the ground, which means that our spine is no longer under compression from gravity force. The result is that we are a few centimetres taller in the morning when we wake up, than we are before going to bed at night. The increase is not much pronounced here on Earth because there is a repeated cycle of compression and decompression of our spine due to gravity, unlike when compared to that of astronauts that spend long duration in space, all the while without gravity forces on their spine

16. In single-slit diffraction, the central band gets thicker as the distance to the screen increases. True False

Answers

Answer:

the right answer is true

Answer:

True

Explanation:

Two objects are in all respects identical except for the fact that one was coated with a substance that is an excellent reflector of light while the other was coated with a substance that is a perfect absorber of light. You place both objects at the same distance from a powerful light source so they both receive the same amount of energy U from the light. The linear momentum these objects will receive is such that:

Answers

Answer:

absorbent    p = S / c

reflective         p = 2S/c

Explanation:

The moment of radiation on a surface is

          p = U / c

where U is the energy and c is the speed of light.

In the case of a fully absorbent object, the energy is completely absorbed. The energy carried by the light is given by the Poynting vector.

           p = S / c

in the case of a completely reflective surface the energy must be absorbed and remitted, therefore there is a 2-fold change in the process

           p = 2S/c

At what angle should the axes of two Polaroids be placed so as to reduce the intensity of the incident unpolarized light to (a) (1/3), (b) (1/10)

Answers

Answer:

35.3°

18.4°

Explanation:

a.

The first polariser polarises the unpolarised light reducing its intensity from I0 to I0/2. We have to reduce the intensity from I0/2 to I0/3.

Using to Law of Malus, I=I0cos²θ

cos²θ=I/I0=(I0/3)/I0/2 ,

cosθ=√2/3−−√=0.6667−−−−−√=0.8165

θ=cos−1(0.8165)=35.3∘

B.

Cos²θ=I/Io =Io/10/Io9

Cosθ= √9/10= 0.9487

= cos−10.9487

=18.4°

(a) The angle of polaroid such that intensity reduces by 1/3 is 35.26°

(b) The angle of polaroid such that intensity reduces by 1/10 is 63.43°

Angle of polarisation:

According to the Malus Law: The intensity of light when passing through a polarizer is given by:

I = I₀cos²θ

where θ is the angle of the polarizer axis with the direction of polarization of the light

I₀ is the initial intensity

When an unpolarised light passes through a polarizer, θ varies from 0 to 2π, so the intensity after passing the first polarizer is :

I = I₀<cos²θ>   { average of cos²θ, for 0<θ<2π}

I = I₀/2

Now, this emerging light passes through a second polarizer such that:

(a) the intensity is I' = I₀/3

From Malus Law:

I' = Icos²θ

I₀/3 =  (I₀/2)cos²θ

cos²θ = 2/3

θ = 35.26°

(b) the intensity is I' = I₀/10

From Malus Law:

I' = Icos²θ

I₀/10 =  (I₀/2)cos²θ

cos²θ = 1/5

θ = 63.43°

Learn more about Malus Law:

https://brainly.com/question/14177847?referrer=searchResults

To understand the meaning of the variables in Gauss's law, and the conditions under which the law is applicable. Gauss's law is usually written
ΦE=∫E.dA =qencl/ϵ0
, where ϵ0=8.85×10−12C2/(N⋅m2) is the permittivity of vacuum.
How should the integral in Gauss's law be evaluated?
a. around the perimeter of a closed loop
b. over the surface bounded by a closed loop
c. over a closed surface

Answers

Answer:

Explanation:

jjjjjjjjjjjjjjjj

A man hits a 50 grams golf ball such that it leaves the tee at an angle of 40o with the horizontal and strikes the ground at the same elevation 20 m away. Determine the impulse of the club C on the ball.

Answers

Answer:

Explanation:

Range of projectile R = 20 m

formula of range

R = u² sin2θ / g

u is initial velocity , θ is angle of projectile

putting the values

20 = u² sin2x 40 / 9.8

u² = 199

u = 14.10 m /s

At the initial point

vertical component of u

= u sin40 = 14.1 x sin 40

= 9.06 m/s

Horizontal component

= u cos 30

At the final point where the ball strikes the ground after falling , its speed remains the same as that in the beginning .

Horizontal component of velocity

u cos 30

Vertical component

= - u sin 30

= - 9.06 m /s

So its horizontal component remains unchanged .

change in vertical component = 9.06 - ( - 9.06 )

= 18.12 m /s

change in momentum

mass x change in velocity

= .050 x 18.12

= .906 N.s

Impulse = change in momentum

= .906 N.s .

A conducting sphere with radius R is charged until the magnitude of the electric field just outside its surface is E. The electric potential of the sphere, relative to the potential for away, is: Group of answer choices 0 E/R E/R2 ER ER2

Answers

Answer:

he correct answer is V = ER

Explanation:

In this exercise they give us the electric field on the surface of the sphere and ask us about the electric potential, the two quantities are related

                ΔV = ∫ E.ds

where E is the elective field and normal displacement vector.

Since E is radial in a spray the displacement vector is also radial, the dot product e reduces to the algebraic product.

                 ΔV = ∫ E ds

                 ΔV = E s

                 

since s is in the direction of the radii its value on the surface of the spheres s = R

                  ΔV = E R

checking the correct answer is V = ER

Other Questions
which is most harmful computer virus define How do you solve -6(4d+5)+7d=-2d Blood is supplied to the myocardium by A) the coronary sinus. B) the coronary arteries. C) arteries that branch off the subclavian arteries. D) contact with blood in the pumping chambers. E) arteries that branch from the pulmonary arteries. During 2025, Saul Company discovered that the ending inventories reported on its financial statements were incorrect by the following amounts: 2023 $60,000 understated 2024 $75,000 understated Prior to any adjustments for these errors and ignoring income taxes, 2024 Net Income would be: Corey approached the task in a manner that implied thathe didn't care about the outcome.Which revision best eliminates the wordiness in the sentence by replacing aphrase?A. Corey, uncaring, approached the task.O B. Corey approached the task with an air of carelessness.O C. Corey approached the task in an uncaring way.D. Corey approached the task carelessly. A hypothetical Island lies far from any other landmasses. There are many different types of plants, but only one animal, a beetle plant and feed by chewing leaves. Given that the beetle is not exploiting all the resources on the island, which morphologic trigger an adaptive radiation of the beetles? Determine the volumes of 0.10 M CH3COOH and 0.10 M CH3COONa required to prepare 10 mL of the following pH buffers: pH 4.7, pH 5.7. (Note: the pKa of CH3COOH Which does not cause destruction inperiodontal tissues?Select one:a. Aminotransferaseb. ProteaseC. Collagenased. Hyaluronidase Joey borrows 2000 from his grandfather and pays the money back in monthly payments of 200.1. Write a lineat function that represents the remaining money owed L(x) after x months. 2. Evaluate L(10) and interpret the meaning in the context of this problem. A. L(x) - 200x + 2,400; L(10) = 4,400, This represents the amount Joey has paid his grandfather after 10 months. B. L(x) = 200x + 2,400; L(10) - 4,400, This represents the amount Joey still owes his grandfather after 10 months. C. L(x) = -200x + 2,400; L(10) = 400, This represents the amount Joey has paid his grandfather after 10 months. D. L(x) = -200x + 2,400; L(10) = 400, This represents the amount Joey still owes his grandfather after 10 months. Tammy has $20 to spend at the movie theater. She spends $9.50 on a movie ticket. If the snack counter sells bags of candy for $3.50 each, how many bags of candy can Tammy buy with the money she has left? help me please and thank uLook at these details from a paragraph about the same topic:. You should solve easier crossword puzzles before trying harder ones. When you get stuck on a clue, take a short break and try again later. If you are really stuck, move to another part of the crossword puzzle.Choose the main idea that ties all the details together.A. Several strategies can help you solve crossword puzzles.B. Taking breaks from a crossword puzzle can help you solve it.C. Some people enter crossword puzzle tournaments.D. It is helpful to study completed crossword puzzles. 2. In what way does an enzyme affect the reaction it catalyzes? How does the enzyme produce this effect? In a Gallup poll of randomly selected adults, 66% said that they worry about identity theft. For a group of 1013 adults, the mean of those who do not worry about identify theft is closest to: Marigold Company uses a job order cost system and applies overhead to production on the basis of direct labor costs. On January 1, 2020, Job 50 was the only job in process. The costs incurred prior to January 1 on this job were as follows: direct materials $20,600, direct labor $12,360, and manufacturing overhead $16,480. As of January 1, Job 49 had been completed at a cost of $92,700 and was part of finished goods inventory. There was a $15,450 balance in the Raw Materials Inventory account. During the month of January, Marigold Company began production on Jobs 51 and 52, and completed Jobs 50 and 51. Jobs 49 and 50 were also sold on account during the month for $125,660 and $162,740, respectively. The following additional events occurred during the month. 1. Purchased additional raw materials of $92,700 on account. 2. Incurred factory labor costs of $72,100. Of this amount $16,480 related to employer payroll taxes. 3. Incurred manufacturing overhead costs as follows: indirect materials $17,510; indirect labor $20,600; depreciation expense on equipment $12,360; and various other manufacturing overhead costs on account $16,480. 4. Assigned direct materials and direct labor to jobs as follows. Job No. Direct Materials Direct Labor 50 $10,300 $5,150 51 40,170 25,750 52 30,900 20,600(a) Calculate the predetermined overhead rate for 2020, assuming Lott Company estimates total manufacturing overhead costs of $840,000, direct labor costs of $700,000, and direct labor hours of 20.000 for the year. (b) Open job cost sheets for Jobs 50. 51. and 52. Enter the January 1 balances on the job cost sheet for Job 50. (c) Prepare the journal entries to record the purchase of raw materials, the factory labor costs incurred, and the manufacturing overhead costs incurred during the month of January. (d) Prepare the journal entries to record the assignment of direct materials, direct labor, and manufacturing overhead costs to production. In assigning manufacturing overhead costs, use the overhead rate calculated in (a). Post all costs to the job cost sheets as necessary. (e) Total the job cost sheets for any job(s) completed during the month. Prepare the journal entry (or entries) to record the completion of any job(s) during the month. (f) Prepare the journal entry (or entries) to record the sale of any job(s) during the month. (g) What is the balance in the Finished Goods Inventory account at the end of the month? What does this balance consist of? (h) What is the amount of over- or underapplied overhead? When using the cost of production report to analyze the change in direct materials cost per equivalent unit compared to conversion cost per equivalent unit, an investigation may reveal that direct materials costs:_____.a. will never decrease due to the way the cost is calculated. b. will never increase due to the way the cost is calculated. c. may increase or decrease between periods, depending on the fluctuation of the cost of the direct materials.d. will only increase if conversion costs increase as well. Which of the following statements about energy producing technologies is true? a. Some currently used energy producing technologies have no disadvantages. b. Alternatives to nonrenewable energy sources can be as effective. c. Air pollution is common to all energy producing technologies. d. Alternatives to nonrenewable energy sources are typically more damaging to the environment. Please select the best answer from the choices provided A B C D List some typical benefits an employee might receive on top of their wage? Match the sentence with its correct image. Image 01, World language class with the flag of the country which is directly north of Spain Image 02, Boy in front of a blackboard showing a formula Image 03, Outdoor class with some students exercising and a teacher timing their speed Image 04, Graph paper with some algebraic exercises written on it Match Term Definition B Image 01 A) Yo tengo la clase de educacin fsica. Image 02 B) Usted tiene la clase de francs. Image 03 C) Tienes la clase de lgebra. C Image 04 D) Mi amigo tiene la clase de fsica. Paragraphs often include a topic sentence.TrueFalse If the direction of the position is north and the direction of the velocity is up, then what is the direction of the angular momentum