A car travels with a starting velocity of 20 m/s and an ending velocity of 40 m/s in 5 seconds what the acceleration
-
A. 4 m/s^2
B. 5 m/s^2
C. 6 m/s^2
D. 7 m/s^2

The attraction or repulsion between magnetic poles is called the Magnetic domain.

A magnetic sphere is a region within a magnetic material in which the magnetization is in a invariant direction. This means that the individual glamorous moments of the tittles are aligned with one another, and they point in the same direction, a magnetic sphere structure is responsible for the magnetic gets of ferromagnetic accoutrements like iron, nickel, cobalt and their blends, and ferrimagnetic accoutrements like ferrite. This includes the conformation of endless attractions and the magnet of ferromagnetic accoutrements to a glamorous field. The regions separating glamorous disciplines are called sphere walls, where the magnetization rotates coherently from the direction in one sphere to that in the coming sphere. The study of magnetic disciplines is called micromagnetics.

To learn more about magnetic domains, click here:

brainly.com/question/27949287

#SPJ4

The force exerted by the fire hose is 2.827 kN

First, we need to calculate the area of the jet using the formula for the area of a circle:

Area = π x (radius)^2

We know the diameter of the jet is 0.6m, so the radius is half of that

radius = 0.6m / 2 = 0.3m

Plugging this value into the formula, we get:

Area = π x (0.3m)^2 = 0.2827 m^2

Next, we can use the formula for pressure to calculate the force exerted:

Pressure = Force / Area

Rearranging this formula to solve for force, we get:

Force = Pressure x Area

Plugging in the given values, we get:

Force = 10 kPa x 0.2827 m^2 = 2.827 kN

Therefore, the force exerted by the fire hose is 2.827 kN (kilonewtons).

Learn more about force below.

https://brainly.com/question/12970081

#SPJ1

A 2.0-horsepower motor that runs for 1.0 hour will do 5.4 x 10^6⁶ joules of work (rounded to two significant digits) assuming 100% efficiency.

To calculate the work done by the motor, we need to use the formula: Work = Power x Time

The power of the motor is given in horsepower, so we need to convert it to watts to use it in the formula. One horsepower is equal to 746 watts, so a 2.0-horsepower motor is equivalent to 1492 watts.

Now we can plug in the values:

Work = 1492 watts x 1 hour

Since 1 hour is equal to 3600 seconds, we can convert it to joules

Work = 1492 watts x 3600 seconds

Work = 5.35 x 10⁶ joules

Finally, we round the answer to two significant digits, which gives us 5.4 x 10⁶ joules. Therefore, a 2.0-horsepower motor that runs for 1.0 hour will do 5.4 x 10⁶ joules of work assuming 100% efficiency.

To know more about horsepower motor, refer here:

https://brainly.com/question/13258299#

#SPJ11

The star which appears fainter is farther. Star A and B are both standard candles, but Star A appears fainter, so it is farther.

A standard candle is an object of a known luminosity that astronomers can use to estimate distances based on the difference between its apparent and absolute magnitudes. Astronomers discovered that the luminosity of a standard candle can be calculated using its apparent magnitude because the apparent magnitude of an object is related to its luminosity. The luminosity of the stars determines how bright they are. Star A appears fainter than Star B despite being identical in luminosity because it is farther away from Earth. The farther an object is, the fainter it appears. The relationship between an object's luminosity, distance, and apparent magnitude is described by the inverse-square law, which states that the intensity of light is inversely proportional to the square of the distance from the source.

The formula for the inverse-square law can be used to calculate how much brighter an object appears when it is closer to the observer. If two objects have the same luminosity and one is farther away than the other, the closer object will appear brighter.

#SPJ11

to learn more about luminosity : https://brainly.com/question/24208626

a. Distance from q₃ to q₁ = 23.0 cm

b. the magnitude and the direction of the force F₁₃ exerted by q₁ on  q₃ -3.00 x 10⁻³ N.

c. The magnitude and the direction of the force F23 exerted by q2 on q3 = -3.00 x 10⁻³ N

d. The magnitude and the direction of the force F₂₃ exerted by q₂ on q₁ = -7.5 x 10⁻⁵ N

To find the distance from q₃ to q₁ and from q₃ to q₂, we can use the Pythagorean theorem. The distance from q₃ to q₁ is the hypotenuse of a right triangle with legs of 12.0 cm (the distance from q₃ to the origin on the y-axis) and 16.0 cm + 4.00 cm = 20.0 cm (the distance from q₁ to the origin on the x-axis). Thus:

distance from q₃ to q₁ = √(12.0 cm² + 20.0 cm²) = 23.0 cm

Similarly, the distance from q₃ to q₂ is the hypotenuse of a right triangle with legs of 12.0 cm (the distance from q₃ to the origin on the y-axis) and 16.0 cm - 4.00 cm = 12.0 cm (the distance from q₂ to the origin on the x-axis). Thus:

distance from q₃ to q₂ = √(12.0 cm² + 12.0 cm²) = 16.97 cm (to two significant figures)

How to find the magnitude and the direction of the force F₁₃ exerted by q₁ on q₃?

To find the magnitude of the force F₁₃ exerted by q₁ on q₃, we can use Coulomb's law:

F₁₃ = k * q₁ * q₃/ r₁₃²

where k = 9 x 10⁹ Nm²/C² is the Coulomb constant, q₁ and q₃ are the charges in coulombs, and r₁₃ is the distance between the charges in meters. In this case, q₁ = q₃ = 4.00 μC = 4.00 x 10⁻⁶ C and r₁₃ = 12.0 cm = 0.12 m. Thus:

F₁₃ = (9 x 10⁹ Nm²/C²) * (4.00 x 10⁻⁶ C) * (-1.00 x 10⁻⁶ C) / (0.12 m)²

= -3.00 x 10⁻³ N

The negative sign indicates that the force is attractive, since q₁ and q₃ have opposite signs.

c. q₂ = q₁, so The magnitude and the direction of the force F₂₃ exerted by q₂ on q₃ = -3.00 x 10⁻³ N

d. q₃ = 1/4q₂, so -3.00 x 10⁻³/4 N

= −0.00075 = -7.5 x 10⁻⁵

The magnitude and the direction of the force F₂₃ exerted by q₂ on q₁ = -7.5 x 10⁻⁵ N

To learn more about electric forces, visit:

https://brainly.com/question/30236242

#SPJ1

The magnitude of the angular momentum of the Earth in a circular orbit around the sun is 1.91 x 10^40 kg m^2/s.

To calculate the magnitude of the angular momentum of the Earth in a circular orbit around the sun, angular momentum, L = I * w where L is the angular momentum, I is the moment of inertia, and w is the angular velocity.

For a circular orbit, the angular velocity is given by, w = v / r, where v is the speed of the Earth in its orbit and r is the radius of the orbit.

The moment of inertia of a rotating object is given by,

I = 2/5 * m * r^2

where m is the mass of the Earth and r is the radius of the orbit.

We can find the speed of the Earth in its orbit using the formula,

v = 2 * pi * r / T

where T is the period of the Earth's orbit around the sun.

The radius of the Earth's orbit is approximately 1.496 x 10^11 meters, and the period of the Earth's orbit is approximately 365.25 days or 31,557,600 seconds.

Using these values, we can calculate the speed of the Earth in its orbit.

v = 2 * pi * 1.496 x 10^11 / 31,557,600 = 29,783 meters per second

We can also calculate the moment of inertia of the Earth.

I = 2/5 * 5.972 x 10^24 kg * (1.496 x 10^11 meters)^2 = 9.70 x 10^37 kg m^2

L = I * w = (9.70 x 10^37 kg m^2) * (29,783 meters per second / 1.496 x 10^11 meters) = 1.91 x 10^40 kg m^2/s

To know more about angular momentum, here

brainly.com/question/31116219

#SPJ4

We can solve this problem using the kinematic equations of motion for a projectile under constant acceleration due to gravity. In particular,

we can use the equation:

h = y + viy×t - (1/2)gt²

where h is the maximum height attained by the projectile,

y is the initial height of the projectile (in this case, 50 feet), viy is the initial vertical velocity of the projectile (in this case, 128 feet per second),

t is the time it takes for the projectile to reach its maximum height,

and g is the acceleration due to gravity (which we take to be 32.2 feet per second squared).

To find the time it takes for the projectile to reach its maximum height, we can use the fact that the projectile will reach its maximum height when its vertical velocity becomes zero.

At this point, the projectile will have traveled halfway through its trajectory, so the time it takes to reach the maximum height is given by:

tmax = viy/g

Plugging in the given values, we get:

tmax = 128/32.2 seconds

tmax ≈ 3.98 seconds

Now, we can use the equation for the maximum height:

h = y + viy×t - (1/2)gt²

Plugging in the values we have calculated, we get:

h = 50 + 128×3.98 - (1/2)32.2(3.98)²

h ≈ 403.2 feet

Therefore, the maximum height attained by the projectile is approximately 403.2 feet.

To know more about initial velocity , visit :

https://brainly.com/question/9365999

#SPJ1

The sources of uncertainty associated with determining the focal length of the 10 cm focal length lens in Part 1 include both random and systematic uncertainties. The random uncertainties include the precision of the measurements taken. The systematic uncertainties include possible errors in the measurement instruments.

In Part 1, the focal length of the 10 cm focal length lens was determined using the lens formula and measurements of object and image distances. Random uncertainties arise due to the inherent variability in measurements, such as the placement of the object and image distances. Systematic uncertainties arise due to factors such as instrument errors and lens deviation from a perfect spherical shape.

These uncertainties can affect the accuracy of the measurement and need to be taken into consideration during the uncertainty analysis. The combination of random and systematic uncertainties contribute to the total uncertainty associated with the determination of the focal length of the lens.

To know more about uncertainty, here

brainly.com/question/30298257

#SPJ4

Answer:

Kinetic energy (K.E) when it is 30.0 m above the ground is 30.84 J .

Explanation:

If there’s gonna be a 2nd person who answers, hope you can give me Brainliest. :D

Role-playing games are those that require players to use a variety of manipulating abilities, such as throwing, rolling, catching, sprinting, jumping, and stretching.

2) TUMBANG PRESO is a very popular game among kids in the entire nation. In the background, in the park, or even in the side streets, it was being played.

3)To play batuhang bola, you need 5 TEAMS.

4) The head is the only portion of the body that is off limits when playing games.

5) In Batuhang Bola, the DEFLECTORS try to avoid being struck by the shooters of the attacking teams until the 5-minute waiting period has passed.

6)TARGET GAMES involve sending an item in the direction of a target while dodging obstacles.

7)TUMBANG PRESO is a common kid's game in the Philippines.

8)Target games need a lot of catching and throwing ability.

9) It can be made a bit more flattened so that it is more difficult to tumble.

10). The abilities needed into using stairs as opposed to an elevator include walking and running.

To know more about direction click here

brainly.com/question/30098658

#SPJ4

Target Games involve throwing, catching, and other physical skills. Chinese Garter is not a Target Game. Batuhang Bola requires two teams. Catching a ball in Batuhang Bola grants a "life" to revive a player or continue to play if hit by the ball.

Games that involve physical skills like throwing, catching, and running are known as Target Games. Chinese Garter is not a Target Game. Batuhang Bola is a Target Game that requires two teams to play. The purpose of gaining "life" in Batuhang Bola when a player catches a ball is to revive another player or continue to play if hit by the ball. This rule makes the game more exciting and strategic, as players must decide whether to risk catching the ball and potentially losing their life or letting it go to avoid being hit. The team with the most remaining lives at the end of the game wins. The game promotes teamwork, coordination, and quick thinking, making it a popular game in the Philippines.

learn more about physical skills here:

https://brainly.com/question/29851457

#SPJ4

Answer:

The speed of sound in water at a temperature of 25°C is 1500 m/s. We can use the formula:

wavelength = speed of sound / frequency

where frequency is given as 300 Hz.

wavelength = 1500 m/s / 300 Hz

wavelength = 5 meters

Therefore, the wavelength of a 300 Hz sound wave traveling through water at a temperature of 25°C is 5 meters.

Explanation:

The mass of the second railroad car, rounded to the nearest whole number, given that the car was initially at rest is 5884 Kg

The following data were obtained from the question:

The mass of second railroad car  be obtained as illustrated below:

Momentum before = momentum after

m₁u₁ + m₂u₂ = v(m₁ + m₂)

(4500 × 3) + (m₂ × 0) = 1.3 × (4500 + m₂)

13500 + 0 = 5850 + 1.3m₂

13500 = 5850 + 1.3m₂

Collect like terms

13500 - 5850 = 1.3m₂

7650 = 1.3m₂

Divide both sides by 1.3

m₂ = 7650 / 1.3

m₂ = 5884 Kg

Thus, the mass of the second railroad car is 5884 Kg

Learn more about mass of car:

https://brainly.com/question/23659944

#SPJ1

The distance from Earth at which the gravitational potential energy of a spaceship-Earth system is reduced to half the energy before launch is approximately 117 million meters (117,000 kilometers).

The gravitational potential energy of a spaceship-Earth system is directly proportional to the distance between them. As the spaceship moves away from the Earth, its potential energy increases. The energy required to move the spaceship away from the Earth against the force of gravity is directly proportional to the mass of the spaceship and the distance between the spaceship and the Earth. To find the distance at which the gravitational potential energy of the spaceship-Earth system is reduced to half the energy before launch, we can use the formula for gravitational potential energy. By solving for the distance using the given values of the masses of the Earth and the spaceship, the gravitational constant, and the initial energy, we can determine that the distance is approximately 117 million meters or 117,000 kilometers.

learn more about gravitational potential energy here:

https://brainly.com/question/19768887

#SPJ4

6,371 km above the surface of the earth he has to go to lose 20% of his body weight

let's calculate as follows.

Step 1: We know that the weight of an object is given as;

Weight = Mass x Acceleration due to gravity

So, man's weight on earth can be given as;`

Weight = Mass x Acceleration due to gravity

Weight = 85 kg x 9.81 m/s²

Weight = 834.85 N

Step 2: To find the height the man needs to go to lose 20% of his body weight;

Let h be the height in meters the man needs to go to lose 20% of his body weight.`20% of the man's weight = 20/100 x 834.85 = 166.97 N

Since weight decreases as one moves away from the surface of the earth. Therefore, let's consider the man's weight at a height h

Weight = Mass x Acceleration due to gravity = 0.8 x 834.85``

0.8 x 834.85 = 667.88 N

At height h, the weight of the man is 667.88 N

So, let's calculate h;

Weight = Mass x Acceleration due to gravity

667.88 = 85 x 9.81 x (Earth radius / (Earth radius + h)²)

(Earth radius + h)² = 9.81 x 85 / 667.88(6371000 + h)² = 7180.63

(6371000 + h) = ±84.81

h = 6371000 + 84.81

Since h is the distance above the surface of the earth the man must go to lose 20% of his body weight, he needs to go 6,371,084.81 meters (approx. 6,371 km).

Therefore, to lose 20% of his body weight, the man needs to go 6,371 km above the surface of the earth.

Learn more about the surface of the earth at: brainly.com/question/30760592

#SPJ11

The average force exerted on the object is equal to the area under the force vs. time graph, which can be calculated as (400 N) x (20 ms) = 8000 Nms. Dividing by the time interval of 20 ms gives an average force of 400 N.

To calculate the average force exerted on the object, we need to find the area under the force vs. time graph during the given time interval. The maximum force on the graph is 400 N and the time interval is from 20 ms to 40 ms. Therefore, the area under the graph can be calculated as the product of the maximum force and the time interval:

Area = (400 N) x (20 ms) = 8000 Nms.

The average force exerted on the object is equal to this area divided by the time interval:

Average Force = Area / Time Interval = 8000 Nms / 20 ms = 400 N

Therefore, the average force exerted on the object during the given time interval is 400 N.

learn more about average force here:

https://brainly.com/question/29781083

#SPJ4

If the experiment was repeated but started with all of the mass on the hanger and then decreased it one increment at a time, the results would be different. This is because the mass would be acting as a force, and decreasing the mass would decrease the force applied to the spring.

As a result, the spring would stretch less for each decrease in mass, and the relationship between the mass and the stretch of the spring would be different than in the original experiment. The spring constant of the spring would remain the same, but the data collected would be different due to the change in the force applied.

If you repeated the experiment by starting with all of the mass on the hanger and then decreased it one increment at a time, your results might be slightly different due to potential systematic errors or hysteresis effects in the system.

Know more about   systematic errors    here:

https://brainly.com/question/14639975

#SPJ11

At those instants, the energy of the wave has been transformed into the potential energy of the string.

This is because, during the wave's motion, the peaks and troughs move towards equilibrium. As they move, they store energy in the form of elastic potential energy, which is the energy stored in the string due to its stretching. When the wave is totally flat, the wave has reached equilibrium and the stored energy has been converted into potential energy. This is why the string appears flat at those instants.
The energy is not transformed into the kinetic energy of the string or the energy of sound waves. The nodes of the wave, where the string is flat, are points at which the wave's kinetic energy is zero, and the energy of sound waves is not produced by standing waves.

In conclusion, when a snapshot is taken of a standing wave on a string at certain instants, the energy of the wave is transformed into the potential energy of the string.

for more such questions on energy .

https://brainly.com/question/25959744

#SPJ11

Answer:

The wavelength of the wave would increase to 10 meters.

Explanation:

We can use the formula:

velocity = frequency × wavelength

to relate the velocity, frequency, and wavelength of a wave.

Given that the wave has a speed of 20 m/s and a wavelength of 5 meters, we can solve for its frequency as follows:

frequency = velocity ÷ wavelength = 20 m/s ÷ 5 meters = 4 Hz

Now, if the same wave is created in the same medium, but with half the original frequency, its new frequency will be:

new frequency = 4 Hz ÷ 2 = 2 Hz

To find the new wavelength of the wave, we can rearrange the formula above to solve for wavelength:

wavelength = velocity ÷ frequency

Using the new frequency of 2 Hz, we get:

new wavelength = 20 m/s ÷ 2 Hz = 10 meters

Therefore, if the same wave was created in the same medium, with half the original frequency, the wavelength of the wave would increase to 10 meters.

An average net force of -12.25 N is required to stop a 7 kg shopping cart that is initially moving at 3.5 m/s in 2 seconds, acting in the opposite direction to the cart's initial velocity.

To determine the average net force required to stop a 7 kg shopping cart in 2 s, we can use the equation:

Δv = aΔt

where Δv is the change in velocity, a is the acceleration, and Δt is the time interval.

Initially, the shopping cart is traveling at a velocity of 3.5 m/s, and it comes to a stop in 2 s, so Δv = -3.5 m/s. We can rearrange the equation above to solve for the acceleration:

a = Δv / Δt = (-3.5 m/s) / (2 s) = -1.75 m/s²

The negative sign indicates that the acceleration is in the opposite direction to the initial velocity, which is necessary to stop the cart. Finally, we can use Newton's second law, F = ma, to calculate the average net force required:

F = ma = (7 kg) x (-1.75 m/s²) = -12.25 N

The negative sign indicates that the force is in the opposite direction to the initial velocity of the cart. Therefore, an average net force of 12.25 N is required to stop the 7 kg shopping cart in 2 s, assuming constant acceleration.

Learn more about velocity here: brainly.com/question/17127206

#SPJ4

Using the given values, the time for one electron to travel the full length of the transmission line is approximately 14 billion years. This calculation is based on the drift velocity of electrons in copper, which is very slow.

The drift velocity of electrons in copper, which is a measurement of how quickly they move in a certain direction under the influence of an electric field, may be used to determine how long it takes for one electron to travel the whole length of the transmission line. The high-voltage transmission line in this instance is 190 km long, 2.00 cm in diameter, and capable of transmitting a constant current of 1,070 A. One electron takes approximately 14 billion years to travel the whole length of the transmission line, according to the free charge density of copper. This is because numerous collisions with other atoms and heat agitation cause the electron drift velocity in copper to be extremely sluggish.

learn more about transmission line here:

https://brainly.com/question/12533429

#SPJ4

The power p supplied to a resistor whose resistance is r when it is known that it has a voltage v across it can be expressed as P = v²/r.

Power is the rate at which energy is transferred. The power P can be represented as P = W/t, where W is the work done, and t is the time required to complete the work.

Resistance is the ratio of voltage to current in an electrical circuit. It is a measure of how difficult it is to transfer a current through a component.

The power P provided to a resistor whose resistance is r when it is known that it has a voltage v across it is given by:

P = v²/r

Therefore, power can be expressed in terms of resistance and voltage as P = v²/r, where v is the voltage across the resistor and r is its resistance.

Learn more about Power here: https://brainly.com/question/11569624

#SPJ11

The predicted period for mode T1 is approximately 0.78 seconds and the predicted period for mode T2 is approximately 1.10 seconds.

Assuming the string has negligible mass, the period of oscillation for a simple pendulum is given by,

T = 2π √(L/g)

where L is the length of the pendulum and g is the acceleration due to gravity.

For Figure 9.2a, the straw is at the midpoint of the string, so the effective length of the pendulum is L/2 = 30 cm. The mass of the bob is given as 97 gm.

Using the formula,

T1 = 2π √(L/g)

= 2π √(0.3/9.81)

≈ 0.78 s (to 2 decimal places)

For Figure 9.2b, the straw is at one end of the string, so the effective length of the pendulum is L = 60 cm. The mass of the bob is given as 97 gm.

Using the formula,

T2 = 2π √(L/g)

= 2π √(0.6/9.81)

≈ 1.10 s (to 2 decimal places)

To know more about vibration, here

brainly.com/question/30547460

#SPJ4

--The complete question is, Symmetric versus anti-symmetric problem. If the length of your string it 60 cm and the mass of the bob is 97 gm, what do you expect the period T1 for the mode in Figure 9.2a(symmetric) to be? The straw should be halfway down the string.; What do you predict for the period of T2 of the mode illustrated in Figure 9.2b(anti-symmetric)? Please right your answers with 1 decimal places.--

Answer: The center of mass of the L shaped lamina is located at (0.458, 0.458) or approximately (0.46, 0.46) units from the lower left corner of the lamina

Explanation:

To find the center of mass of the L shaped lamina, we need to locate the point where the lamina will balance. The center of mass is given by the formula:

x = (M1x1 + M2x2 + M3x3) / (M1 + M2 + M3)

where x is the x-coordinate of the center of mass, M is the mass of the respective part, and x1, x2, and x3 are the x-coordinates of the centers of mass of the respective parts.

In this case, the L shaped lamina can be divided into three parts:

the rectangular part, the small square part, and the triangular part. Each part has the same mass since the lamina is uniform.

The rectangular part has a center of mass at (1/2, 1/4) and a mass of 2 Kg.
The small square part has a center of mass at (1/4, 3/4) and a mass of 0.5 Kg.
The triangular part has a center of mass at (1/3, 1/3) and a mass of 0.5 Kg.

Substituting these values into the formula, we get:

x = (2*1/2 + 0.5*1/4 + 0.5*1/3) / (2 + 0.5 + 0.5)
x = 0.458

Therefore, the center of mass of the L shaped lamina is located at (0.458, 0.458) or approximately (0.46, 0.46) units from the lower left corner of the lamina.

To know more about  center of mass visit:

https://brainly.com/question/30259066

#SPJ11

The electric potential at a point that is at a distance of 8.0 cm from the negative charge, on a line that makes a 90° angle with the line segment connecting the two charges, is -1.875 x[tex]10^{7}[/tex] V.

What is Electric Potential?

Electric potential is a measure of the electrical potential energy per unit of charge. It is the amount of work that is needed to move a unit positive charge from a reference point to a specific point in an electric field, without any acceleration. It is measured in volts (V) and is also known as electric potential difference or voltage.

To find the electric potential at a point on a line that makes a 90° angle with the line segment connecting the two charges, we need to find the electric potential due to each charge and then add them algebraically.

The electric potential due to a point charge Q at a distance r from it is given by:

V = kQ/r

where k is the Coulomb's constant (9 x 10^9 N[tex]m^{2}[/tex]/[tex]C^{2}[/tex]).

Let's first find the electric potential due to the negative charge at the given point:

V1 = k(-3.0 μC)/(8.0 cm) = -3.375 x [tex]10^{7}[/tex] V

The negative sign indicates that the electric potential is negative, as expected due to the negative charge.

Now, let's find the electric potential due to the positive charge at the given point:

V2 = k(4.0 μC)/(6.0 cm + 8.0 cm) = 1.5 x [tex]10^{7}[/tex] V

The positive sign indicates that the electric potential is positive, as expected due to the positive charge.

Finally, we can find the net electric potential at the given point by adding the electric potentials due to each charge:

V = V1 + V2 = -3.375 x[tex]10^{7}[/tex] V + 1.5 x[tex]10^{7}[/tex] V = -1.875 x [tex]10^{7}[/tex] V

Learn more about Electric Potential from given link

https://brainly.com/question/14306881

#SPJ1

The friction dissipated 9.82 J of energy, the velocity of the arrow/box system right after the collision is 1.12 m/s to the right, and the initial velocity of the arrow was 11.2 m/s to the right.

To solve this problem, we'll use the conservation of momentum and the work-energy principle.

First, let's find the initial velocity of the arrow before it hits the box. We can use the conservation of momentum equation:

m1v1 = (m1 + m2)vf

where m1 is the mass of the arrow,

v1 is the initial velocity of the arrow,

m2 is the mass of the box,

and vf is the final velocity of the arrow and box system after the collision.

Plugging in the values we get:

(0.25 kg)(v1) = (0.25 kg + 2.5 kg)(vf)

Solving for v1, we get:

v1 = 10vf

Next, we need to find the velocity of the arrow/box system after the collision.

We can use the work-energy principle:

W friction = ΔK

where W friction is the work done by friction and ΔK is the change in kinetic energy of the arrow/box system.

Since the arrow and box start at rest, the initial kinetic energy is zero.

The work done by friction is:

W friction = f friction x d

where f friction is the force of friction and d is the distance the box slides.

The force of friction is:

ffriction = μk x Fn

where μk is the coefficient of kinetic friction and Fn is the normal force. Since the box is on a horizontal surface, the normal force is equal to the weight of the box:

Fn = m2g

where g is the acceleration due to gravity.

Plugging in the values we get:

[tex]f friction = (0.30)(2.5 kg)(9.81 m/s^2) = 7.34 N[/tex]

Now we can find the work done by friction:

W friction = (7.34 N)(1.34 m) = 9.82 J

The change in kinetic energy is:

Δ[tex]K = (1/2)(m1 + m2)vf^2 - 0[/tex]

where vf is the final velocity of the arrow and box system after the collision.

Plugging in the values we get:

Δ[tex]K = (1/2)(0.25 kg + 2.5 kg)vf^2[/tex]

Setting W friction equal to ΔK and solving for vf, we get:

vf = [tex]\sqrt{(2Wfriction/(m1+m2))}[/tex]

[tex]\sqrt{ (2(9.82 J)/(0.25 kg + 2.5 kg)) }[/tex]

= 1.12 m/s

Finally, we can find the initial velocity of the arrow:

v1 = 10vf

= 10(1.12 m/s)

= 11.2 m/s.

For similar question on dissipated.

https://brainly.com/question/28790634

#SPJ11

In order to determine the best wavelength for measuring a given sample with Beer's Law, one must first identify the components of the sample and the maximum absorption of each component. This can be done by measuring the absorption of each component at different wavelengths. Once this data is collected, the wavelength with the highest absorption for the sample can be determined.

According to Beer's Law, the absorption of light by a solution is proportional to its concentration and the path length of the light. The best wavelength for measuring a given sample with Beer's Law is determined by the absorbance of the sample.

The conclusion that can be drawn about the best wavelength for measuring a given sample with Beer's Law is that it is determined by the sample's absorbance.

Absorbance is directly proportional to concentration and path length, as determined by Beer's Law.

Therefore, the wavelength at which a sample has the highest absorbance is the best wavelength for measuring that particular sample. It's worth noting that the best wavelength for measuring a given sample may differ from that of another sample. This is because different samples may have different molecular structures and therefore absorb different wavelengths of light.

Know more about Beer's Law here:

https://brainly.com/question/29352272

#SPJ11

In circular motion with constant speed, the object moves in a circular path at a constant speed, while experiencing centripetal acceleration and centripetal force directed towards the center of the circle.

In circular motion with constant speed, the object moves in a circular path at a constant speed. This means that the object covers equal distance in equal time intervals. The velocity of the object is tangential to the circle at every point.

Centripetal acceleration is the acceleration of an object moving in a circular path, directed towards the center of the circle. It is always perpendicular to the velocity of the object and is given by the formula a = v^2/r, where a is the centripetal acceleration, v is the velocity of the object, and r is the radius of the circular path.

Learn more about circular motion:https://brainly.com/question/2285236

#SPJ1

Answer:

2.613 hp

Explanation:

We know that

Power=Work done/time  

Power=Work done * Distance/ time  ----->eq(1)

where,

Work done=Mg  

Distance=0.4m

time=1 s

where M=>mass of the object,

g=>acceleration due to gravity

g=9.8 m/s² and M=500Kg

So,

Work done=500 * 9.8=4900 J

Substituting the values in eq(1) we get

Power = (4900*0.4)/1 = 1960 Watt

750 Watt = 1 hp

1960 Watt = (1*1960)/750

                 =2.613 hp

Yes it is true that when there is acceleration, a position vs time graph is a curve.

The concept of acceleration refers to the measure of how quickly an object's velocity changes over time. This physical quantity is denoted by the symbol "a" and is considered a vector quantity since it has both magnitude and direction. To put it simply, acceleration is the rate at which an object's speed changes in a given period of time.

Yes it is true. When examining a position vs. time graph, the presence of acceleration is indicated by a curved line rather than a linear one. This is due to the fact that acceleration signifies a modification in velocity over time, and velocity measures how quickly an object's position changes over time. Consequently, as acceleration fluctuates, so too will an object's velocity and position, resulting in a nonlinear curve on the position vs. time graph.

The slope of this curve on said graph represents an object's velocity at any given point in time, while the slope of the tangent line at that same point represents its instantaneous velocity.

To know more about acceleration, click here

https://brainly.com/question/2272616

#SPJ1

The change in  frequency observed by the driver when the car is approaching a radio station at a speed of 25.0 m/s broadcasting at a frequency of 74.5 MHz is 74.59 MHz.

The formula for finding the observed frequency when the source is moving towards the observer is given by;

f′=f (v±v0/c)

Where, f is the frequency of the source, v is the velocity of light, v0 is the velocity of the source observed by the observer, c is the speed of light.

In this case, given that, v0 = 25.0 m/sf = 74.5 MHz, v = 3.0 x 108 m/s, c = 3.0 x 108 m/s

Putting the values in the formula, we get,

f′=74.5×(3.0×10^8+25.0×1000/3.0×10^8)=74.59 MHz (approx)

Hence, the change in frequency observed by the driver when the car is 74.59 MHz (approx).

Know more about frequency here:

https://brainly.com/question/254161

#SPJ11