Answer:
e. The speed of the object is a constant 6 m/s
Explanation:
Since the net force is towards the centre , hence there is no tangential acceleration . Only centripetal acceleration is there . Hence point mass is moving with uniform speed . Let it be u .
Centripetal force = m v² / r , r is radius of circular path .
Putting the given values
.10 x v² / .36 = 10
v = 6 m /s
A source containing a mixture of hydrogen and deuterium atoms emits light at two wavelengths whose mean is 540 nm and whose separation is 0.170 nm. Find the minimum number of lines needed in a diffraction grating that can resolve these lines in the first order.
Answer:
N=3176.5rulling
Explanation:
We were told that the source containing a mixture of hydrogen and deuterium atoms emits light with
wavelengths whose mean is 540 nm
Then λ= 540 nm, but we need to convert to metre which = (540× 10⁻⁹m)
Also whose separation is 0.170 nm, which mean the difference between the wavelength is 0.170 nm then
Δ λ = 0.170 nm the we convert to metre we have. Δλ= 0.170 nm= (0.170×10⁻⁹m)
the formular below can be used to can be used to calculate our minimum number of lines
N= λ /(m Δλ)
Where N is number of fillings i.e number of lines
λ= wavelength
Δλ= difference in wavelength
m=1
Then if we substitute the values we have
,N= (540× 10⁻⁹ m)/[(1)*(0.170× 10⁻⁹m)]
N =3176.5rulling
Therefore, minimum number of lines = =3176.5rulling
What is the voltage output (in V) of a transformer used for rechargeable flashlight batteries, if its primary has 480 turns, its secondary 8 turns, and the input voltage is 118 V
Answer:
1.97 V
Explanation:
Applying
N1/N2 = V1/V2................... Equation 1
Where N1 = primary turns, N2 = Secondary turns, V1 = primary/input voltage, V2 = secondary/output voltage.
make V2 the subject of the equation
V2 = V1(N2/N1)............. Equation 2
Given: V1 = 118 V, N1 = 480 turns, V2 = 8 turns.
Substitute into equation 2
V2 = 118(8/480)
V2 = 1.97 V.
Suppose that a 0.275 m radius, 500 turn coil produces an average emf of 11800 V when rotated one-fourth of a revolution in 4.42 ms, starting from its plane being perpendicular to the magnetic field.
Required:
Find the magnetic field strength needed to induce an average emf of 10,000 V.
Answer:
The magnetic field strength : 0.372 T
Explanation:
The equation of the induced emf is given by the following equation,
( Equation 1 ) emf = - N ( ΔФ / Δt ) - where N = number of turns of the coil, ΔФ = change in the magnetic flux, and Δt = change in time
The equation for the magnetic flux is given by,
( Equation 2 ) Ф = BA( cos( θ ) ) - where B = magnetic field, A = area, and θ = the angle between the normal and the magnetic field
The area of the circular coil is a constant, as well as the magnetic field. Therefore the change in the magnetic flux is due to the angle between the normal and the magnetic field. Therefore you can expect the equation for the change in magnetic flux to be the same as the magnetic flux, but only that there must be a change in θ.
( Equation 3 ) ΔФ = BA( Δcos( θ ) )
Now as the coil rotates one-fourth of a revolution, θ changes from 0 degrees to 90 degrees. The " change in cos θ " should thus be the following,
Δcos( θ ) = cos( 90 ) - cos( 0 )
= 0 - 1 = - 1
Let's substitute that value in the third equation,
( Substitution of Δcos( θ ) previously, into Equation 3 )
ΔФ = BA( - 1 ) = - BA
Remember the first equation? Well if the change in the magnetic flux = - BA, then through further substitution, the emf should = - N( - BA ) / Δt. In other words,
emf = - N( - BA ) / Δt,
emf = NBA / Δt,
B = ( emf )Δt / NA
Now that we have B, the magnetic field strength, isolated, let's solve for the area of the circular coil and substitute all known values into this equation.
Area ( A ) = πr²,
= π( 0.275 )² = 0.2376 m²,
B = ( 10,000 V )( 4.42 [tex]*[/tex] 10⁻³ s ) / ( 500 )( 0.2376 m² ) = ( About ) 0.372 T
The magnetic field strength : 0.372 T
The voltage across the terminals of an ac power supply varies with time according to V=V0cos(t). The voltage amplitude is V0 = 41.0V .
A. What is the root-mean-square potential difference Vrms?
B. What is the average potential difference Vav between the two terminals of the power supply?
Answer:
A) V_rms = 29 V
B) Vav = 0 V
Explanation:
A) We are told that;
V = V_o cos ωt
voltage amplitude; V = V_o = 41.0V
Now, the formula for the root-mean-square potential difference Vrms is given as;
V_rms = V/√2
Thus plugging in relevant values, we have;
V_rms = 41/√2
V_rms = 29 V
B) Due to the fact that the voltage is sinusoidal from the given V = V_o cos ωt, we can say that the average potential difference Vav between the two terminals of the power supply would be zero.
Thus; Vav = 0 V
A. The root-mean-square potential difference ([tex]V_{rms}[/tex]) is equal to 28.99 Volts.
B. For this voltage with a sinusoidal waveform (sine wave), the average potential difference ([tex]V_{ave}[/tex]) between the two terminals of the power supply is equal to zero (0).
Given the following data:
Voltage amplitude = 41.0 Volts.The voltage across the terminals of an alternating current (AC) power supply varies directly with time according to the equation:
[tex]V_0 = V_0cos(t)[/tex]
A. To find the root-mean-square potential difference ([tex]V_{rms}[/tex]):
Mathematically, root-mean-square for voltage in an alternating current (AC) power supply (circuit) is given by the formula:
[tex]V_{rms} = \frac{V}{\sqrt{2} }[/tex]
Substituting the given parameter into the formula, we have;
[tex]V_{rms} = \frac{41}{\sqrt{2} }\\\\V_{rms} = \frac{41}{1.4142 }\\\\V_{rms} = 28.99\; Volts[/tex]
B. To find the average potential difference ([tex]V_{ave}[/tex]) between the two terminals of the power supply:
For this voltage with a sinusoidal waveform (sine wave), the average potential difference ([tex]V_{ave}[/tex]) between the two terminals of the power supply is equal to zero (0).
Read more: https://brainly.com/question/15121836
To shoot a swimming fish when an intense light beam from a laser gun you should aim
Answer
aim directly at the image
Explanation
the light from the laser beam will also bend when it hits the air water interface , so aim directly at the fish
An MRI machine needs to detect signals that oscillate at very high frequencies. It does so with an LC circuit containing a 15mH coil. To what value should the capacitance be set to detect a 450 MHz signal?
Answer:
The capacitance is [tex]C = 3.2 9 *10^{-16} \ F[/tex]
Explanation:
From the question we are told that
The induction of the LC circuit is [tex]L = 15 mH = 15 *10^{-3} \ H[/tex]
The frequency is [tex]w = 450 \ MHz = 450 *10^{6} \ Hz[/tex]
The natural frequency is mathematically represented as
[tex]w = \frac{1}{\sqrt{LC} }[/tex]
Where C is the capacitance So
=> [tex]C = \frac{1}{L * w^2}[/tex]
substituting values
[tex]C = \frac{1}{15 *10^{-3} * [450 *10^{6}]^2}[/tex]
[tex]C = 3.2 9 *10^{-16} \ F[/tex]
The value for which the capacitance should be set to detect a 450 MHz signal is [tex]8.34 \times 10^{-24} \;F[/tex]
Given the following data:
Inductance = 15 mH = [tex]15 \times 10^{-3}\;H[/tex]Frequency = 450 MHz = [tex]450 \times 10^6 \;Hz[/tex]To determine the value for which the capacitance should be set to detect a 450 MHz signal:
Mathematically, natural frequency is given by the formula:
[tex]f_o = \frac{1}{2\pi \sqrt{LC} }[/tex]
Where:
L is the inductance.C is the capacitance.Making C the subject of formula, we have:
[tex]C = \frac{1}{(2\pi f_o)^2L} \\\\C = \frac{1}{(2\;\times \;3.142 \times \;450 \;\times\; 10^9)^2 \; \times \;15 \times 10^{-3}}\\\\C = \frac{1}{8 \times 10^{24} \;\times \;15 \times 10^{-3} } \\\\C = \frac{1}{1.2 \times 10^{23}} \\\\C= 8.34 \times 10^{-24} \;F[/tex]
Read more: https://brainly.com/question/23754122
a car brakes and stops at 10 [m]. While stopping, the friction force of the wheels on the pavement is 400 [N]. Calculate the work done.
Explanation:
Work = force × distance
W = (400 N) (10 m)
W = 4000 J
The angle between the axes of two polarizing filters is 41.0°. By how much does the second filter reduce the intensity of the light coming through the first?
Answer:
The amount by which the second filter reduces the intensity of light emerging from the first filter is
z = 0.60
Explanation:
From the question we are told that
The angle between the axes is [tex]\theta = 41^o[/tex]
The intensity of polarized light that emerges from the second filter is mathematically represented as
[tex]I= I_o cos^2 \theta[/tex]
Where [tex]I_o[/tex] is the intensity of light emerging from the first filter
[tex]I = I_o [cos(41.0)]^2[/tex]
[tex]I =0.60 I_o[/tex]
This means that the second filter reduced the intensity by z = 0.60
A dust particle on a phonograph record rotates at a speed of 45 revolutions per minute if the particle is 10 cm from the axis of rotation. Find. 1) its linear speed and linear acceleration.
Explanation:
ω = 45 rev/min × (2π rad/rev) × (1 min / 60 s) = 4.71 rad/s
r = 10 cm = 0.10 m
1) The linear speed is:
v = ωr
v = (4.71 rad/s) (0.10 m)
v = 0.471 m/s
2) The linear acceleration in the tangential direction is 0.
The linear acceleration in the radial direction is:
a = v² / r
a = (0.471 m/s)² / (0.10 m)
a = 2.22 m/s²
If you were in a smooth-riding train with no windows, could you sense the difference between uniform motion and rest or between accelerated motion and rest?
1. Both acclerated and uniform motion can be sensed.
2. Only uniform motion can be sensed.
3. Only accelerated motion can be sensed.
4. No motion can be sensed.
Answer:
3. Only accelerated motion can be sensed
Explanation:
Without windows on such a train, you'd have no frame of reference for your speed. By that I mean, without being able to see how fast you are moving past other things, it's almost as if you aren't moving at all... almost.
At rest you obviously aren't moving and in uniform motion, with a constant speed, it would feel as though you aren't moving. But during periods of acceleration you'll feel the force on your body (F=ma) and would be able to tell if you were moving in a particular direction.
You've probably felt this before. Maybe not on a windowless train but perhaps in a car or on a roller coaster. Speeding up makes you go back into your seat a bit and slowing down makes you lean forward a bit. Both speeding up and slowing down are examples of acceleration (just in different directions) and how fast you accelerate will affect how much force you experience.
So the answer would be option 3.
Side note: If the train wasn't smooth riding then there would be some amount of friction going on and you could probably tell if you were in motion by the products of that friction (like sound and vibrations) even at a constant speed.
1. A força de atração eletrostática é responsável pela união dos íons, onde cargas elétricas de sinais opostos se atraem. Falando a um nível microscópico, tal atração entre os íons acaba produzindo aglomerados com formas geométricas bem definidas, representados pela figura a seguir: Qual a melhor definição para essa estrutura iônica e que composto é formado a partir dela? * 1 ponto cristais de sal / cloreto de potássio. cristal com face plana / cloreto de cálcio. retículo cristalino / cloreto de sódio. retículo de ligações / clorato de sódio.
Answer:
estrutura cristalina / cloreto de sódio
Explicação:
O cloreto de sódio forma a estrutura cristalina da treliça. Nesta estrutura, um átomo de sódio é cercado por 6 íons de carga oposta. Os íons opostos são negativos porque o sódio perde elétrons, o que o torna ião carregado positivamente chamado cátion, de modo que 6 íons negativos estão presentes ao redor do sódio. A estrutura cristalina também é conhecida como cúbico simples, o que significa que eles são distribuídos em três dimensões com igual distância entre eles e formando um ângulo de 90 graus.
Will give brainliest ASAP! Please help (1/10 questions, will mark 5 stars and brainliest for all answers if correct)
Answer:
Option (A)
Explanation:
A 20 kg boy chases the butterfly with a speed of 2 meter per second.
Angle at which he runs is 70° North of West.
Therefore, Horizontal component (Vx) directing towards West will be,
Vx = v(Cos70°)
Vy = v(Sin70°)
Since momentum of a body is defined by,
Momentum = Mass × Velocity
Therefore, Westerly component of the momentum will be,
Momentum = 20 × (v)(Cos70°)
= 20 × 2Cos70°
= 13.68
≈ 13.7 kg-meter per second
Therefore, Option (A) will be the answer.
A moon orbits a planet along an elliptical path. Which describes the location of the planet within the ellipse
Must be at a focus.
----------------
Hope this helps!
Brainliest would be great!
----------------
With all care,
07x12
One of the two foci of the elliptical route that the moon follows is the planet. The planet will be positioned at one of the two focal points (foci) of an elliptical orbit. The other focus is still vacant.
The two foci are connected by the ellipse's major axis, and for any given ellipse, their separation is constant. The mass of the planet and the mass of the object it orbits—for example, a star if it's a planet in a solar system—are used to calculate the planet's position. The moon revolves the planet in an elliptical pattern due to the gravitational forces between the planet and the object it orbits, with the planet itself at one of the foci.
To know more about elliptical route, here
brainly.com/question/29531708
#SPJ2
A Young'sdouble-slit interference experiment is performed with monochromatic light. The separation between the slits is 0.44 mm. The interference pattern on the screen 4.2 m away shows the first maximum 5.5 mm from the center of the pattern. What is the wavelength of the light in nm
Answer:
Explanation:
The double slit interference phonemene is described for the case of constructive interference
d sin θ= m λ (1)
let's use trigonometry to find the sinus
tan θ = y / L
in general in interference phenomena the angles are small
tan θ = sin θ / cos θ = sin θ
The double slit interference phonemene is described for the case of constructive interference
d sin θ = m lam (1)
let's use trigonometry to find the sinus
tan θ = y / L
in general in interference phenomena the angles are small
tan θ = sin θ / cos θ = sin θ
we substitute
sin θ = y / L
we substitute in equation 1
d y / L = m λ
λ = dy / L m
let's reduce the magnitudes to the SI system
d = 0.44 mm = 0.44 10⁻³ m
y = 5.5 mm = 5.5 10⁻³ m
L = 4.2m
m = 1
let's calculate
λ = 0.44 10⁻³ 5.5 10⁻³ / (4.2 1)
λ = 5.76190 10-7 m
let's reduce to num
lam = 5.56190 10-7 m (109 nm / 1m)
lam = 556,190 nmtea
we substitute
without tea = y / L
we substitute in equation 1
d y / L = m lam
lam = dy / L m
let's reduce the magnitudes to the SI system
d = 0.44 me = 0.44 10-3 m
y = 5.5 mm = 5.5 10-3
L = 4.2m
m = 1
let's calculate
lam = 0.44 10⁻³ 5.5 10⁻³ / (4.2 1)
lam = 5.76190 10⁻⁷ m
let's reduce to num
lam = 5.56190 10⁻⁷ m (109 nm / 1m)
lam = 556,190 nm
An automotive air conditioner produces a 1-kW cooling effect while consuming 0.75 kW of power. What is the rate at which heat is rejected from this air conditioner
Answer:
The rejected by the air conditioning system is 1.75 kilowatts.
Explanation:
A air conditioning system is a refrigeration cycle, whose receives heat from cold reservoir with the help of power input before releasing it to hot reservoir. The First Law of Thermodynamics describes the model:
[tex]\dot Q_{L} + \dot W - \dot Q_{H} = 0[/tex]
Where:
[tex]\dot Q_{L}[/tex] - Heat rate from cold reservoir, measured in kilowatts.
[tex]\dot Q_{H}[/tex] - Heat rate liberated to the hot reservoir, measured in kilowatts.
[tex]\dot W[/tex] - Power input, measured in kilowatts.
The heat rejected is now cleared:
[tex]\dot Q_{H} = \dot Q_{L} + \dot W[/tex]
If [tex]\dot Q_{L} = 1\,kW[/tex] and [tex]\dot W = 0.75\,kW[/tex], then:
[tex]\dot Q_{H} = 1\,kW + 0.75\,kW[/tex]
[tex]\dot Q_{H} = 1.75\,kW[/tex]
The rejected by the air conditioning system is 1.75 kilowatts.
A solid block is attached to a spring scale. When the block is suspended in air, the scale reads 20.1 N; when it is completely immersed in water, the scale reads 15.3 N.
A) What is the volume of the block?
B) What is the density of the block?
Answer:
A) [tex]V = 4.92 \cdot 10^{-4} m^{3} = 492 cm^{3}[/tex]
B) [tex] d = 4181.49 kg/m^{3} = 4.18 g/cm^{3} [/tex]
Explanation:
A) Using the Archimedes' force we can find the weight of water displaced:
[tex] W_{d} = W_{a} - W_{w} [/tex]
Where:
[tex]W_{a}[/tex]: is the weight of the block in the air = 20.1 N
[tex]W_{w}[/tex]: is the weight of the block in the water = 15.3 N
[tex] W_{d} = W_{a} - W_{w} = 20.1 N - 15.3 N = 4.8 N [/tex]
Now, the mass of the water displaced is:
[tex] m = \frac{W_{d}}{g} = \frac{4.8 N}{9.81 m/s^{2}} = 0.49 kg [/tex]
The volume of the block can be found using the mass of water displaced and the density of the water:
[tex]V = \frac{m}{d} = \frac{0.49 kg}{997 kg/m^{3}} = 4.92 \cdot 10^{-4} m^{3} = 492 cm^{3}[/tex]
B) The density of the block can be found as follows:
[tex] d = \frac{W_{a}}{g*V} = \frac{20.1 N}{9.81 m/s^{2}*4.92 \cdot 10^{-4} m^{3}} = 4181.49 kg/m^{3} = 4.18 g/cm^{3} [/tex]
I hope it helps you!
select the example that best describes a renewable resource.
A.after a shuttle launch, you can smell the jet fuel for hours.
B.solar panels generate electricity that keeps the satellites running.
C.tractor trailers are large trucks that run on diesel fuel.
D. we use our barbeque every night; it cooks with propane.
Answer:
B.solar panels generate electricity that keeps the satellites running.
Explanation:
Solar panels are a renewable resource because they take energy from the sun.
A 269-turn solenoid is 102 cm long and has a radius of 2.3 cm. It carries a current of 3.9 A. What is the magnetic field inside the solenoid near its center?
Answer:
Magnitude of the magnetic field inside the solenoid near its centre is 1.293 x 10⁻³ T
Explanation:
Given;
number of turns of solenoid, N = 269 turn
length of the solenoid, L = 102 cm = 1.02 m
radius of the solenoid, r = 2.3 cm = 0.023 m
current in the solenoid, I = 3.9 A
Magnitude of the magnetic field inside the solenoid near its centre is calculated as;
[tex]B = \frac{\mu_o NI}{l} \\\\[/tex]
Where;
μ₀ is permeability of free space = 4π x 10⁻⁷ m/A
[tex]B = \frac{4\pi*10^{-7} *269*3.9}{1.02} \\\\B = 1.293 *10^{-3} \ T[/tex]
Therefore, magnitude of the magnetic field inside the solenoid near its centre is 1.293 x 10⁻³ T
EXAMPLE 5 Find the radius of gyration about the x-axis of a homogeneous disk D with density rho(x, y) = rho, center the origin, and radius a. SOLUTION The mass of the disk is m = rhoπa2, so from these equations we have 2 = Ix m = 1 4πrhoa4 rhoπa2 = a2 4 .
Answer:
Radius of gyration = a/2.
Explanation:
So, from the question above I can see that the you are already answering the question and you are stuck up or maybe that's how the problem is set from the start. Do not worry, you are covered in any of the ways. So, from the question we have that;
"The mass of the disk is m = ρπa^2, so from these equations we have y^2 = Ix/m."
(NB: I changed the "rho" word to its symbol).
Thus, the radius of gyration with respect to x-axis = (1/4 πρa^4)/ πρa^2 = a^2/4.
Therefore, the Radius of gyration = a/2.
In the 1980s, the term picowave was used to describe food irradiation in order to overcome public resistance by playing on the well-known safety of microwave radiation. Find the energy in MeV of a photon having a wavelength of a picometer.
Answer:
E = 1.24MeV
Explanation:
The photon travels at the speed of light, 3.0 × [tex]10^{8}[/tex] m/s, and given that its frequency = 1 picometer = 1.0 × [tex]10^{-12}[/tex] m.
Its energy can be determined by;
E = hf
= (hc) ÷ λ
where E is the energy, h is the Planck's constant, 6.626 × [tex]10^{-34}[/tex] Js, c is the speed of the light and f is its frequency.
Therefore,
E = (6.626 × [tex]10^{-34}[/tex]× 3.0 × [tex]10^{8}[/tex]) ÷ 1.0 × [tex]10^{-12}[/tex]
= 1.9878 × [tex]10^{-25}[/tex] ÷ 1.0 × [tex]10^{-12}[/tex]
E = 1.9878 × [tex]10^{-13}[/tex] J
But, 1 eV = 1.6 × [tex]10^{-19}[/tex] J. So that;
E = [tex]\frac{1.9878*10^{-13} }{1.6*10^{-19} }[/tex]
= 1242375 eV
∴ E = 1.24MeV
The energy of the photon is 1.24MeV.
If a bicycle starts from rest and is pedaled normally until the bike is moving at 6 meters per second across level ground, what kinds of energy have its tires been given? (Select all that apply) g
Answer: Translational Kinetic Energy
Rotational Kinetic Energy
Explanation:
An object has translational kinetic energy when it is undergoing through a linear displacement.
Rotational energy is kinetic energy due to the rotation of an object .
Here the wheel of bicycle undergoes both translational and rotational kinetic energy has it moves with linear displacement with rotation in it.
Hence, the tires have been two kinds of energy : translational and rotational kinetic energy
A 2.0 kg handbag is released from the top of the Leaning Tower of Pisa, and 55 m before reaching the ground, it carries a speed of 29 m / s. What was the average force of air resistance?
Answer:
4.31 N
Explanation:
Given:
Δy = -55 m
v₀ = 0 m/s
v = -29 m/s
Find: a
v² = v₀² + 2aΔy
(-29 m/s)² = (0 m/s)² + 2a (-55 m)
a = -7.65 m/s²
Sum of forces in the y direction:
∑F = ma
R − mg = ma
R = m (g + a)
R = (2.0 kg) (9.8 m/s² − 7.65 m/s²)
R = 4.31 N
Assume that the physics instructor would like to have normal visual acuity from 21 cm out to infinity and that his bifocals rest 2.0 cm from his eye. What is the refractive power of the portion of the lense that will correct the instructors nearsightedness
This is note the complete question, the complete question is:
One of the lousy things about getting old (prepare yourself!) is that you can be both near-sighted and farsighted at once. Some original defect in the lens of your eye may cause you to only be able to focus on some objects a limited distance away (near-sighted). At the same time, as you age, the lens of your eye becomes more rigid and less able to change its shape. This will stop you from being able to focus on objects that are too close to your eye (far-sighted). Correcting both of these problems at once can be done by using bi-focals, or by placing two lenses in the same set of frames. An old physicist instructor can only focus on objects that lie at distance between 0.47 meters and 5.4 meters.
Assume that the physics instructor would like to have normal visual acuity from 21 cm out to infinity and that his bifocals rest 2.0 cm from his eye. What is the refractive power of the portion of the lense that will correct the instructors nearsightedness?
Answer: 3.04 D
Explanation:
when an object is held 21 cm away from the instructor's eyes, the spectacle lens must produce 0.47m ( the near point) away.
An image of 0.47m from the eye will be ( 47 - 2 )
i.e 45 cm from the spectacle lens since the spectacle lens is 2cm away from the eye.
Also, the image distance will become negative
gap between lense and eye = 2cm
Therefore;
image distance d₁ = - 45cm = - 0.45m
object distance d₀ = 21 - 2 = 19cm = 0.19m
P = 1/f = 1/ d = 1/d₀ + 1/d₁ = 1/0.19 + (-1/0.45)
P = 1/f = 5.26315789 - 2.22222222
P = 1/f = 3.04093567 ≈ 3.04 D
•• A metal sphere carrying an evenly distributed charge will have spherical equipotential surfaces surrounding it. Suppose the sphere’s radius is 50.0 cm and it carries a total charge of (a) Calculate the potential of the sphere’s surface. (b)You want to draw equipotential surfaces at intervals of 500 V outside the sphere’s surface. Calculate the distance between the first and the second equipotential surfaces, and between the 20th and 21st equipotential surfaces. (c) What does the changing spacing of the surfaces tell you about the electric field?
Answer:
Explanation:
For this exercise we will use that the potential is created by the charge inside the equinoctial surface and just like in Gauss's law we can consider all the charge concentrated in the center.
Therefore the potential on the ferric surface is
V = k Q / r
where k is the Coulomb constant, Q the charge of the sphere and r the distance from the center to the point of interest
a) On the surface the potential
V = 9 10⁹ Q / 0.5
V = 18 10⁹ Q
Unfortunately you did not write the value of the load, suppose a value to complete the calculations Q = 1 10⁻⁷ C, with this value the potential on the surfaces V = 1800 V
b) The equipotential surfaces are concentric spheres, let's look for the radii for some potentials
for V = 1300V let's find the radius
r = k Q / V
r = 9 109 1 10-7 / 1300
r = 0.69 m
other values are shown in the following table
V (V) r (m)
1800 0.5
1300 0.69
800 1,125
300 3.0
In other words, we draw concentric spheres with these radii and each one has a potential difference of 500V
C) The spacing of the spheres corresponds to lines of radii of the electric field that have the shape
E = k Q / r²
What is the relationship between the surface area of a parachute and the amount of air resistance it builds up when it is deployed by a sky diver?
Answer:
An open parachute increases the cross-sectional area of the falling skydiver and thus increases the amount of air resistance which he encounters. Once the parachute is opened, the air resistance overwhelms the downward force of gravity.
Explanation:
The larger a parachute, the greater the force.
Hope it helps you in a little way.
Two large, flat, horizontally oriented plates are parallel to each other, a distance d apart. Half-way between the two plates the electric field field has a magnitude E. If the separation of the plates is reduced to d/2 what is the magnitude of the electric field half-way between the plates
Answer:
Explanation:
Let the potential difference between the plate is V . Then in the first case
Electric field E between plate
E₁ = V / d
where d is separation between plate
When the plate separation becomes d / 2
Electric field E between plate
E₂ = V / d /2
= 2 V / d =2E₁
Or twice the earlier field
qual charges, one at rest, the other having a velocity of 104 m/s, are released in a uniform magnetic field. Which charge has the largest force exerted on it by the magnetic field?
Answer:
The correct option is D
Explanation:
From the question we are told that
The speed of the first charge is [tex]v = 0 \ m/s[/tex]
This is because it is at rest
The speed of the second charge is [tex]v = 10^{4} \ m/s[/tex]
Generally the force exerted by a magnetic field on a charge is mathematically represented as
[tex]F_q = q * v * B sin \theta[/tex]
Now looking at this above equation we can see that [tex]F_q[/tex] can only be maximum at [tex]\theta = 90 ^o[/tex] and this only obtained when the direction of the charge (i.e its velocity ) is perpendicular to the direction of the magnetic field
so the correct option for this question is D
a football is kicked toward a goal keeper with an initial speed of 20m/s at an angle of 45 degrees with the horizontal .at the moment the ball is kicked the goal keeper is 50m from the player .at what speed and in what direction must the goalkeeper run in order to catch the ball at the same height at which it was kicked
Answer:
3.18 m/s
Explanation:
Given that
Initial speed of the ball, u = 20 m/s
Angle of inclination, θ = 45°
Distance from the ball, h = 50 m
Using equations of projectile to solve this, we have
We start by finding the time of flight, T
T = 2Usinθ/g
T = (2 * 20 * sin45)/9.8
T = (40 * 0.7071) / 9.8
T = 28.284/9.8
T = 2.89 s
Next we find the Range, R
R = u²sin2θ/g
R = (20² * sin 90) / 9.8
R = (400 * 1) / 9.8
R = 400/9.8 = 40.82 m
Distance the gk must cover
40.82 - 50 m
-9.18 m or 9.18 m in the opposite direction.
Speed of the GK = d/t
9.18 / 2.89 = 3.18 m/s
An electron is accelerated through 2.35 103 V from rest and then enters a uniform 2.30-T magnetic field. (a) What is the maximum magnitude of the magnetic force this particle can experience
the maximum magnitude is 5.5
Consider a house at sea level that has 2500 square feet of floor area. What is the total force that the air inside the house exerts upward on the ceiling
Answer:
Total Force that the air inside the house exerts upward on the ceiling is 5.25 × 10⁶ lb
Explanation:
Force = Atmospheric Pressure × Floor Area
Where; Standard Atmospheric Pressure = 2100 lb/ft²
Floor Area = 2500 ft²
Substitute the data
∴ Total Force = 2100 lb/ft² × 2500 ft²
Total Force = 5.25 × 10⁶ lb