Answer:
I think ur answer might be 54 g
As 72-18=54
Hope this helps....
A wave traveling at 100 m/s has a frequency of 200Hz. What is the wavelength of this wave?
A car is traveling with an initial velocity of 15 m/s when the driver decides to go faster by accelerating at 5 m/s squared for 10 seconds. How far did the car travel during this time?
Answer:
x = 400 [m]
Explanation:
To solve this problem we must use the following kinematics equations, first, we find the final speed, and then we proceed to find the distance traveled.
[tex]v_{f}=v_{i} +(a*t)\\[/tex]
where:
Vf = final velocity [m/s]
Vi = initial velocity = 15 [m/s]
a = acceleration = 5 [m/s^2]
t = time = 10 [s]
Note: the positive sign in the Equation indicates that the car is accelerating, i.e. its speed is increasing.
Now replacing
Vf = 15 + (5*10)
Vf = 65 [m/s]
Now using the second equation:
[tex]v_{f} ^{2}= v_{i} ^{2}+(2*a*x)[/tex]
where:
x = distance traveled [m]
x = (65^2 - 15^2)/ (2*5)
x = 400 [m]
The sound of frequency greater than 20,000 Hz is called ....
20,000 112 से अधिक आवृति की ध्वनि
कहा जाता है।
Positive electrode is called
घनात्मक इलेक्ट्रोड को
कहते हैं।
d.
Answer:
ultra sound... follow me
how will you place the coin inside the glass without touching it?
hmmmmmmmmmmmmmmmmmmmmm
A car is traveling 24.8 m/s and speeds up to 26.8 m/s in 4.3 seconds. What is the car's average acceleration during this time?
≈ 0.47 m/s²
Explanation:Hi there !
Acceleration formula
a = (v₂ - v₁)/t
a = (26.8m/s - 24.8m/s)/4.3s
= (2m/s)/4.3s
≈ 0.47 m/s²
Good luck !
1.
What is a force? What changes can be produced by a force?(AS)
Answer:
the pull or push which changes or tends to change the position of an object from rest to motion or motion to rest is called force.
Changes of force that can be produced:
Force can change the shape of a body.Force can change the position of a body.Force can stop the moving body.Force can change the speed of a moving body.Force can change the direction of a moving body.A materials density is the same , no matter how large or small the sample is or what it’s shape is as long as it is solid uniform piece of the material explain how this is possible and give an example
Answer:
See the explanation below
Explanation:
Density is defined as the relationship between mass and volume, i.e. the following equation can be used:
density = m/v
where:
density [kg/m^3]
m = mass [kg]
v = volume [m^3]
If we change the volume of a body by reducing its size, its mass will also decrease proportionally with a density as seen in the equation.
m = density*v
To understand this concept more clearly, let's use the following example:
We know that the density of water is equal to 1000 [kg/m^3], that is, 1 cubic meter of water contains 1000 kilograms of water, using the equation.
1000 = m /1
m = 1000*1 = 1000 [kg]
Now if we have 500 kilograms of water, that would pass with the volume so that the density remains constant.
1000 = 500/v
v = 500/1000
v = 0.5 [m^3]
We can see that the volume of water has halved. Since the mass of water was reduced by half. That is, the relationship between mass and volume is proportional to the density of the material or substance.
Jane measures a piece of metal and determines it has a mass of 10 grams and a volume of 2 mL. What is the density of the piece of metal?
Answer: 5g/ml
Explanation:
What is the acceleration of the car from 0 to 2 s ? - What is the magnitude of the net force exerted on the car from 0 - 2s ? - What is the acceleration of the car from 2 s to 4s - What is the magnitude of the force exerted in stopping the car ? What is the instantaneous velocity at 1 ?
Answer:
a) a = 0 m / s²
, b) a = 0 ==> F = 0
, c) a = - 2 m / s²
,d) v = 4 m/s
Explanation:
a) It is asked to find the acceleration in the interval from 0 to 2s, from the graph we see that in this interval the velocity is constant with a value of 4 me / s, therefore the average eceleration is
a = (V₂ - V₁) / t
a = (4 -4) / 2
a = 0 m / s²
b) Newton's second law establishes a relationship between force and acceleration
F = m a
as acceleration is zero
a = 0 ==> F = 0
c) the acceleration in interval 2 a4 S
a = (0 - 4) / (4-2) = -4 / 2
a = - 2 m / s²
The negative sign iniquity the acceleration is slowing the movement
d) the force is
F = m a
F = 2 m
e) from the graph we can read the speed of the vehicle for time
v = 4 m / s
2. _____ - changes in appearances of the Moon as viewed from Earth, due to the relative positions of the Moon, Earth, and the Sun.
A. Maria
B. Moon phase
C. Solar eclipse
D. Lunar eclipse
Answer:
Moon Phase
Explanation:
(BRAINLIEST AND 13 POINTS) Which two variables have an effect on the momentum of an object?
a. mass and position b. mass and velocity c. position and velocity
Answer:
B mass and velocity......................
a physics teacher walks at a very constant and amazing velocity of 2 m/s. a sneaky and disgruntled student stands on top of a 20m building and plans to drop the balloon on the head of the caring and genuine 2m tall physics teacher below how far should the amazing teacher be from the impact point when the disingenuous student releases the balloon of fury?
Answer:
18m
Explanation:
The student should be 18m away from the teacher
A car is driving at a velocity of 24 m/s. If its brakes can supply an acceleration of -5.0 m/s2, how much time will be required to bring the car to a stop?
10.2 s
-29 s
0 s
4.8 s
When does air become turbulent around a thrown ball?
A. On the smooth side of a ball
B. On the rough side of a ball
C. On the right side of a ball
Answer: B (on the rough side)
Thanks for using Brainly! Vote Biden 2020
Hope we influenced your vote!
Air will become turbulent around a thrown ball on the rough side of the ball because it will cause the air waves to be irregular. Option B is the right answer.
When an object is moving in air, it moves smoothly if the shape is streamlined and the body of the object is smooth.
An object will experience turbulence when the air waves are violent and are irregular.
Therefore, air will become turbulent around a thrown ball on the rough side of the ball because it will cause the air waves to be irregular.
The correct answer is option B.
Learn more about turbulence here: https://brainly.com/question/4853035
Which of the following statement is not true regarding liquid pressure?
liquid pressure increases as the height of liquid column increases.
liquid pressure increases with increase in density of the liquid
liquid pressure at same depth is same
liquid pressure is not affected by acceleration due to gravity
what is accelaration
Answer:
it like too gain speed like a car
The part of a longitudinal wave where the particles are spread apart is called a______?
Here are the choose of answers: A- Top Wave has the highest pitch because it has the highest amplitude.
B - Bottom Wave has the highest pitch because it has the lowest frequency.
C- Bottom Wave has the highest pitch because it has the highest frequency.
D- Both waves have the same pitch because they both have the same frequency
Can two vectors of an unequal magnitude add up to give a vector with a magnitude of zero?
explain the types of motion
Answer:
there are three type of notion
Which sentence describes the direction in which heat flows between any two objects?
A.
Heat flows from the object with less internal energy to the object with more internal energy.
B.
Heat flows from the object with a higher specific heat to the object with a lower specific heat.
C.
Heat flows from the object with a lower specific heat to the object with a higher specific heat.
D.
Heat flows from the object at a higher temperature to the object at a lower temperature.
Answer: D just took the test
Explanation:
Answer:
D
Explanation:
What is the displacement when t =2s to 3s
Answer:
t=5s
Explanation:
t=2 + t= 3s = t= 5s
A sprinter running a 100 m race starts at rest, accelerates at constant acceleration of magnitude A for 2 seconds, then runs at a constant speed until the end. Find the position (relative to the start) and speed of the runner at the end of the 2 seconds, in terms of A.
Answer:
The distance ran by the runner in the 2 seconds is 2·A
The speed of the runner at the end of the 2 seconds is 2·A
Explanation:
The given information are;
The distance the sprinter is running = 100 m
The initial constant acceleration of the sprinter, a = A
The duration of the initial acceleration, t = 2 s
The initial speed of the printer, u = 0 (The sprinter starts from rest)
The rate with which the sprinter then runs with to the end = Constant speed
Therefor, we have, from the equation of motion;
s = u × t + 1/2 × a × t²
Where;
s = The distance ran by the sprinter
∴ at t = 2 seconds, we have;
s = 0 × 2 + 1/2 × A × 2² = 1/2 × A × 4 = 2·A
The distance ran by the runner in the 2 seconds = 2·A
The speed, v, of the runner at the end of the 2 seconds is given as follows;
v = u + a × t
When t = 2 seconds, we have;
v = 0 + A × 2 = 2·A
The speed of the runner at the end of the 2 seconds = 2·A.
A car is traveling on a level road at a constant rate of speed. What additional force is necessary to bring the car into equilibrium? zero. greater than the normal force times the coefficient of static friction. the normal force times the coefficient of kinetic friction. equal to the normal force times the coefficient of static friction.
Answer: Zero.
Explanation:
By the first Newton's law, we know that:
every object will remain at rest or in uniform motion in a straight line unless compelled to change its state by the action of an external force.
Now, we know that the car is moving with constant speed, then there is no net force acting on the car, which means that the car is already in equilibrium.
Then if we add one force to the situation, the car will not be anymore in equilibrium.
The correct option is zero.
A laboratory experiment requires 1300 milligrams of sugar. How many kilograms of sugar does the experiment require?
Answer:
The answer is 0.0013.
Explanation:
The answer is 0.0013 becuase the number is even and you have to divide it by ten if it is milligrams to kilograms so basically always divide by tens. Hope this is helpful <3
The experiment requires 0.0013 kg of sugar.
How conversion of milligram to kilogram is done?The milligram is the mass = 1/1,000 of gram (or) 0.0154 grains.
The milligram is an SI unit of weight where as kilogram is also a unit of weight in the metric system.In the metric system, " milli " is the prefix for 10⁻³ and " kilo " is the prefix of 10³.Abbreviation of mg - milligram, kg - kilogram.For example, 50 milligram is 50 mg and 50 kilogram is 50kg.kilograms = milligrams ÷ 1,000,000
The weight in kilograms is equal to the milligrams divided by 1,000,000.
Here,
1300 mg = ( 1300 ÷ 1,000,000) = 0.0013 kg
Hence, the answer is 0.0013 kg.
Learn more about milligram to kilogram,
https://brainly.com/question/729757
#SPJ2
What is the density of a 36 g object with a volume of 15 cm3? (Density: D = )
0.42 g/cm3
0.54 g/cm3
2.4 g/cm3
5.4 g/cm
Answer:
The answer is 2.4 g/cm³Explanation:
The density of a substance can be found by using the formula
[tex]density = \frac{mass}{volume} \\[/tex]
From the question
mass = 36 g
volume = 15 cm³
We have
[tex]density = \frac{36}{15} = \frac{12}{5} \\ [/tex]
We have the final answer as
2.4 g/cm³Hope this helps you
hello what is quantum physics
Answer:
It is a fundamental theory in physics that provides a description of the physical properties of nature at the scale of atoms and subatomic particles.
Which of the following examples shows that a chemical reaction has occurred?
O A solid is formed when heat is removed from a sample of water.
A rock breaks into smaller pieces when it is struck with a hammer.
O A cup of water turns pink when a few drops of red food coloring are added.
Bubbles form when baking soda is added to vinegar and mixed.
Formation of bubbles when baking soda and vinegar are mixed is an example showing a chemical reaction has occurred as these two substances on mixing form sodium acetate.
What are chemical reactions?
Chemical reactions are defined as reactions which occur when a substance combines with another substance to form a new substance.Alternatively, when a substance breaks down or decomposes to give new substances it is also considered to be a chemical reaction.
There are several characteristics of chemical reactions like change in color, change in state , change in odor and change in composition . During chemical reaction there is also formation of precipitate an insoluble mass of substance or even evolution of gases.
There are three types of chemical reactions:
1) inorganic reactions
2)organic reactions
3) biochemical reactions
During chemical reactions atoms are rearranged and reactions are accompanied by an energy change as new substances are formed.
Learn more about chemical reactions,here:
https://brainly.com/question/14929452
#SPJ2
12. The resistivity of a given wire of cross-sectional
area 0.7mm 4.9 x 10raised to the power of -4ohm mm. Calculate the
resistance of a 2ohm length of the wire
R = resistivity × (l/A), A = πr^2= πd^2/4
2 =( 4.9 × 10^ -4) * (l/π0.7^2/4)
make l the subject and calculate.
i assumed we are looking for the length if the wire.
Pete rides his horse 64 km in 4 hours.
What is his average speed in kilometers
per hour?
Given:
D=64 km
T=4 hour
Answer:
His average speed is
[tex] \frac{64km}{4h} = {16kmh}^{ - 1} [/tex]
The most popular throw in ultimate frisbee is the what?
Answer:
The hammer.
Explanation:
The most practiced throw in Ultimate. A hammer is an overhead throw held with the forehand grip
Answer:
HAMMER.
Explanation:
Ah, the hammer. The most practiced throw in Ultimate. A hammer is an overhead throw held with the forehand grip