The initial volume of the container can be calculated using the ideal gas formula, PV = nRT, where P is pressure, V is volume, n is number of moles, R is gas constant, and T is temperature:
What is the Avogadro's law worked example?The best illustration of Avogadro's law is when a balloon is inflated. The volume of the balloon grows as you add moles of gas. Similar to how a balloon loses gas and its volume as you collapse it
What does Class 11 of the Avogadro Law entail?According to Avogadro's law, all gases with an identical volume and the same temperature and pressure have an equal number of molecules. The volume of an ideal gas at a certain mass.
To know more about molar mass visit:-
brainly.com/question/21133305
#SPJ9
LESSON 1
Content Practice B
1
Position and Motion
Directions Complete these purphs by writing the correct terms on the lines. Some terms might be used more
you must first choose ain)
To describe an object's (1. )
(2. )
as a starting place. From there, you must specify the
in
(3. )
to the object and the (4. )
which it lies from the starting place. If you are giving directions to two objects located
it can sometimes
in different directions from the same (5. )
direction
be helpful to describe one object as being in the (6. )
direction
from that place and the other in the (7. )
An object is in (8. )
any time its
is changing. In most cases, such a change involves changes in
(10. )
and (11. )
from the starting
point. However, if an object returns to its starting point, its
(12. )
is zero, even though it might have traveled
Answer:
1. Motion
2. Position
3. Relation
4. Distance
5. Reference point
6. North
7. South
8. motion
9. Speed
10. Distance
11. Direction
12. displacement
(Please could you kindly mark my answer as brainliest you could also follow me so that you could easily reach out to me for any other questions)
defined the objective of the lab, showing critical thinking skills.
Answer:
defined the objective of the lab, showing critical thinking skills.
consider a soluble salt in which the absolute value of the heat of hydration is less than the absolute value of the lattice enthalpy. what are the signs of standard gibbs energy, enthalpy and entropy of precipitation? select the words positive, zero, negative, or unknown in each of the boxes when adding a solid salt to water.
When a soluble salt is present in which the absolute value of the heat of hydration is less than that of the value of the lattice enthalpy, the signs of standard Gibbs energy, enthalpy, and entropy of precipitation would be positive, zero, and negative respectively.
Entropy is a thermodynamic property which is defined as the measure of the degree of randomness present in a system. It is represented by "S". Specifically, it describes the number of possible arrangements of a system that are consistent with its macroscopic state functions (e.g. pressure, temperature and volume). Greater the number of possible arrangements, the higher the entropy.
Changes in temperature, pressure, and the number and types of particles present in a system affects the entropy. By increasing the temperature or addition of particles to a system increases entropy, while on decreasing the temperature or decreasing the number of particles decreases entropy.
In a soluble salt, when absolute value of heat of hydration is less than absolute value of lattice enthalpy then the signs of standard gibbs energy, enthalpy and entropy of precipitation are positive, zero and negative respectively.
To know more about entropy here
https://brainly.com/question/31057236
#SPJ4
how far up the tlc plate should the spots ideally run so that you can calculate the most accurate rf values?
Ideally, the spots on the TLC plate should run between 1-1.5 cm from the origin to calculate the most accurate Rf values.
What is TLC?TLC (Thin Layer Chromatography) is a simple and cost-effective analytical technique used to identify, analyze, and monitor the purity of compounds. A thin layer of silica gel or alumina is applied to a glass or plastic plate in this method. The compound(s) to be analyzed is spotted on the plate's silica layer, and the plate is put in a solvent to allow the sample to move up the plate by capillary action.
TLC is used to:
Estimate the purity of a given compound.Determine the presence of impurities in a given compound and estimate their number.Identify the constituents of a mixture by comparing their RF values with those of known compounds.Understand a reaction's progress and determine the purity of the product.The ideal distance that spots should run up a TLC (thin-layer chromatography) plate depends on several factors, including the type of stationary phase and the nature of the mobile phase being used. However, as a general rule, the spots should be applied to the TLC plate at a distance of about 1-1.5 cm from the bottom edge of the plate.
This allows the solvent front to migrate up the plate and separate the components of the mixture, without causing the spots to merge or overlap. The spots should not be placed too high up the plate as this will result in poor separation and reduced accuracy of the Rf (retention factor) values.
Once the solvent front reaches a suitable distance from the top of the plate (usually around 1-2 cm), the plate should be removed from the chamber and allowed to dry. The Rf value can then be calculated by dividing the distance traveled by the spot by the distance traveled by the solvent front.
Learn more about TLC (Thin Layer Chromatography) here: https://brainly.com/question/30788801
#SPJ11
PLEASE HELP< I"LL MARK BRAINLIEST. How is enthalpy related to the spontaneity of a reaction?
1. ΔH > 0 contributes to spontaneity.
2. ΔH < 0 contributes to spontaneity.
3. ΔH = 0 contributes to spontaneity.
4. ΔH does not affect spontaneity.
Answer:
D
Explanation:
Gibb's free energy change(∆G) and Standard electrode potential of electrochemical (Ecell) determine the spontaneity of a reaction.
when ∆G > 0, the reaction is not spontaneous
∆G < 0, the reaction is spontaneous
∆G = 0, the reaction is in equilibrium
when Ecell > 0, the redox reaction is spontaneous
Ecell < 0, the redox reaction is not spontaneous
Ecell = 0, the redox reaction is in equilibrium.
which of the following statements about strong acids are true? select all that apply: the conjugate base of a strong acid has negligible acid-base properties. all strong acids have the same strength. they produce stable ions that have little tendency to accept a proton. they raise the ph of a solution by increasing the concentration of hydronium.
Strong acids all have the same strength, and the conjugate base of a strong acid exhibits little acid-base characteristics.
The correct option is A and B.
How do you find the conjugate base?The conjugate base's equation is the acid's formula fewer one hydrogen. The reacting base transforms into its conjugate acid. The base's formula is the conjugate acid's formula plus one additional hydrogen ion.
What distinguishes a base from a conjugate base?A conjugate acid-base pair, according to the Brnsted-Lowry definition of acid and base, consists of two substances that seem to be distinct only in that they contain a proton (H+). When a proton is supplied to a base, a conjugate acid is created, and vice versa when a proton is taken away from an acid, a corresponding base is created.
To know more about Conjugate base visit:
https://brainly.com/question/30225100
#SPJ1
The complete question is -
Which of the following statements about strong acids are true?
Select all that apply:
A-The conjugate base of a strong acid has negligible acid-base properties.
B-All strong acids have the same strength.
C-They produce stable ions that have little tendency to accept a proton.
D-They raise the ph of a solution by increasing the concentration of hydronium.
Answer:
The correct statements are: The conjugate base of a strong acid has negligible acid-base properties and they produce stable ions that have little tendency to accept a proton.
Explanation:
Strong acids are acidic compounds that undergo complete ionization in water, raising the concentration of hydronium and lowering the pH of the solution. The leveling effect describes how strong acids may appear to be of equal strength in water, but in a stronger acid such as glacial acetic acid, their true relative strength can be determined.
The graph shows the change in concentration of one of the
species in the reaction A + B+ C -> D + E.
If the graph indicates the reaction rate, then the concentration of
which species is plotted?
A
B
C
D
Based on the given graph, the concentration of species A is plotted as a function of time. The slope of the graph represents the rate of reaction of A, which is changing as the reaction progresses. Therefore, the concentration of species A is plotted in the given graph.
What does the slope of the graph represent in the context of a chemical reaction?The slope of a graph representing the change in concentration of a species over time in a chemical reaction represents the rate of reaction of that species.
Can we determine the concentrations of all the species in a chemical reaction based on a graph of the change in concentration of one species over time?
No, we cannot determine the concentrations of all the species in a chemical reaction based on a graph of the change in concentration of one species over time.
To know more about Graph, visit:
https://brainly.com/question/17267403
#SPJ1
What is the oxidation number of the monatomic ions of the following elements?
a. Cs
b. Ba
c. As
d. Sr
e. Rb
The oxidation number of the monatomic ions of the following elements are a. Cs (cesium): +1, b. Ba (barium): +2, c. As (arsenic): -3, d. Sr (strontium): +2, e. Rb (rubidium): +1.
The oxidation number of the monatomic ions of cesium, barium, arsenic, strontium, and rubidium are +1, +2, -3, +2, and +1, respectively. Below is an explanation of how the oxidation number of each element was obtained.
Oxidation state refers to the oxidation number of an atom, which indicates its state of oxidation or reduction in a chemical reaction. The oxidation state can be determined by adding up the valence electrons of an atom in its neutral state and subtracting the valence electrons that it has either gained or lost in a compound.Cesium has one valence electron, which it gives up to form an ion with a charge of +1. Therefore, the oxidation number of Cs is +1.Barium has two valence electrons, which it gives up to form an ion with a charge of +2. Therefore, the oxidation number of Ba is +2.
Arsenic has five valence electrons, but it prefers to gain three electrons to complete its outer shell of eight electrons, resulting in a charge of -3. Therefore, the oxidation number of As is -3.Strontium has two valence electrons, which it gives up to form an ion with a charge of +2. Therefore, the oxidation number of Sr is +2.Rubidium has one valence electron, which it gives up to form an ion with a charge of +1. Therefore, the oxidation number of Rb is +1. So, the oxidation number of the monatomic ions of cesium, barium, arsenic, strontium, and rubidium are +1, +2, -3, +2, and +1, respectively. Below is an explanation of how the oxidation number of each element was obtained.
Learn more about oxidation number at:
https://brainly.com/question/3035498
#SPJ11
the following is a possible mechanism for a reaction involving hydrogen peroxide in aqueous solution; only a small amount of sodium bromide was added to the reaction mixture. h2o2 1 br2 bro2 1 h2o h2o2 1 bro2hbr2 1 h2o 1 o2 what is the overall reaction? what species is acting as a catalyst? are there any reaction intermediates?
The sodium bromide serves as a source of bromine radicals, which react with hydrogen peroxide to generate more radicals and eventually lead to the formation of molecular oxygen and bromine.
The intermediate hypobromous acid (HOBr) is also formed, which can react with hydrogen peroxide to produce HBrO2 and water, and then react with bromide ions to regenerate bromine radical and complete the catalytic cycle.
The overall reaction can be written as:
2 H2O2 + 2 Br- → 2 H2O + Br2 + 2 O2
In this reaction, sodium bromide (NaBr) is acting as a catalyst, as it is not consumed in the reaction and only a small amount is required to initiate the reaction.
The reaction intermediates are bromine radical (Br•) and hypobromous acid (HOBr), which are formed during the reaction:
H₂O₂+Br⁻ → HO₂+H₂O (slow)
HO₂+H₂O₂→H₂O+O₂+OH (fast)
OH + Br⁻ → HOBr (fast)
HOBr + H₂O₂ → HBrO₂ + H₂O (fast)
HBrO₂ + Br⁻ → Br2 + HO₂⁻ + H2O (fast)
Click the below link, to learn more about Catalyst and properties:
https://brainly.com/question/5482042
#SPJ11
Determine whether each statement is a description of a physical property or a chemical property
Physical properties can be viewed with the senses or assessed without causing harm to the thing. Physical qualities include things like colour, size, mass, length, volume, specific heat, and odour.
Which of the following best depicts physical or chemical properties?Chemical properties include things like the ability to combine with hydrogen to create a gas. How such an element or molecule interacts with the other substances or components is referred to as its chemical characteristics. The distribution of electrons within an atom changes throughout a chemical process.
What are five examples of chemical properties?Flammability, volatility, acidity, reactivity (of various kinds), and heat of combustion are a few examples of chemical qualities. Rust, for instance, is created when iron and oxygen interact inside the presence of water; chromium does not oxidise ([link]).
To know more about mass visit:
https://brainly.com/question/15959704
#SPJ1
What is the color of the starch 12 complex in Experiment 29: Rates of Chemical Reactions I? (A) The.correct answer is not shown. (B) orange-red (C) green
(D) blue-black (E) yellow
The color of the starch-iodine complex in Experiment 29: Rates of Chemical Reactions I is d. blue-black.
Experiment 29: Rates of Chemical Reactions I is one of the many experiments performed in a general chemistry laboratory that involves the determination of the rate of a chemical reaction experimentally. The experiment usually involves the reaction between sodium thiosulfate and hydrochloric acid that takes place in a beaker. This reaction causes the solution to become cloudy because of the formation of solid sulfur.
In this experiment, the reaction rate is measured using a stopwatch to time the duration of the reaction. The reaction rate is determined based on how long it takes for the solution to turn cloudy.The color of the starch-iodine complex in Experiment 29: Rates of Chemical Reactions I is blue-black.
Learn more about iodine at:
https://brainly.com/question/30031313
#SPJ11
caffeine (c8 h10n4 o2 ) is a weak base with a kb value of 4 x 10-4. the ph of a 0.01 m solution of caffeine is in the range of
The pH of a 0.01 M solution of caffeine is in the range of 9.68-9.76.
The chemical formula of caffeine is [tex]C_{8}H_{10}N_{4}O_{2}[/tex]. Caffeine forms a basic solution when dissolved in water. The KB value of caffeine is 4 x 10^-4. The expression for the basicity constant of caffeine is given as:
KB = [OH-][caffeine] / [[tex]C_{8}H_{10}N_{4}O_{2}H^{+}[/tex]]
In a solution of caffeine, the concentration of caffeine and its conjugate acid is equal. The pH of the solution is determined by calculating the concentration of hydroxide ions (OH-) in the solution. The relationship between the concentration of hydroxide ions (OH-) and the basicity constant (KB) is given as:
Kw = Ka x Kb
Where Kw is the ionization constant for water and has a value of 10^-14.
Ka is the acidity constant for caffeine and is given as:
Ka = Kw / Kb = 10^-14 / 4 x 10^-4 = 2.5 x 10^-11.
The expression for the ionization constant for caffeine is given as:
Kb = [OH-][C8H10N4O2] / [C8H10N4O2H+][OH-] = Kb[C8H10N4O2H+] / [C8H10N4O2]
Concentration of caffeine, [C8H10N4O2] = 0.01 M
Concentration of the conjugate acid, [C8H10N4O2H+] = 0.01 M
The pH of the solution can be calculated as:
pH = pKb + log [base] / [acid]
pKb = -log Kb = -log 4 x 10^-4 = 3.4
[base] = [C8H10N4O2] = 0.01 M
[acid] = [C8H10N4O2H+] = 0.01 M
Substituting the values of pKb, [base] and [acid] in the above equation, we get:
pH = 3.4 + log 0.01 / 0.01pH = 3.4 + log 1pH = 3.4 + 0pH = 3.4
Therefore, the pH of a 0.01 M solution of caffeine is in the range of 9.68-9.76.
To learn more about "caffeine", visit: https://brainly.com/question/26670237
#SPJ11
2.Use the figure to compare the melting points of the metals in Groups 1 and 2. As you go down the groups from top to bottom, what generally happens to the melting point?
3. As you go down a group in the periodic table, atomic radii generally increase. Based on the pattern you observed in Question 2, how is the melting point of a metal related to atomic radius?
4. Use the patterns you identified to estimate the likely melting point for K in group 1 and Ba in group 2. Give specific ranges in temperatures for each element and explain your reasoning.
5. Look at the melting points for the metals in the fourth and fifth periods of the periodic table in the figure. As you go from left to right in these periods, how does the melting point change?
6. Considering the patterns you have identified, estimate the likely melting points of Cd, V, and Co.
As we go down, it leads to weaker metallic bonding between the atoms. Weaker metallic bonding results in a lower melting point because it is easier to break the bonds between the atoms.
The melting point of a metal is inversely related to its atomic radius, i.e., as the atomic radius increases, the melting point decreases.
K belongs to Group 1 and Ba belongs to Group 2. As we go down these groups, the melting point decreases. Therefore, K will have a lower melting point than Na and Li, which are the elements above it in the group. The melting point of Na is about 370 K, and the melting point of Li is about 453 K. Therefore, the melting point of K is likely to be in the range of 336-370 K. Similarly, Ba will have a lower melting point than Ca and Mg, which are the elements above it in the group. The melting point of Ca is about 1115 K, and the melting point of Mg is about 923 K. Therefore, the melting point of Ba is likely to be in the range of 700-1115 K.
As we go from left to right in the fourth and fifth periods of the periodic table, the melting point generally increases. This is because the number of valence electrons increases, which leads to stronger metallic bonding and higher melting points.
Cd belongs to Group 12, V belongs to Group 5, and Co belongs to Group 9. As we go down Group 12, the melting point decreases, so Cd is likely to have a lower melting point than Zn, which is the element above it in the group. The melting point of Zn is about 693 K. Therefore, the melting point of Cd is likely to be in the range of 594-693 K. As we go from left to right in Group 5, the melting point generally increases. Therefore, V is likely to have a higher melting point than Ti, which is the element to its left. The melting point of Ti is about 1941 K. Therefore, the melting point of V is likely to be in the range of 1941-2183 K. As we go from left to right in Group 9, the melting point generally increases. Therefore, Co is likely to have a higher melting point than Ni, which is the element to its left. The melting point of Ni is about 1728 K. Therefore, the melting point of Co is likely to be in the range of 1728-1768 K.
To learn more about melting points please visit-
https://brainly.com/question/29578567
#SPJ1
a 2.00 l bottle of a solution of concentrated hcl was purchased for the general chemistry laboratory. the solution contained 868.8 g of hcl. what is the molarity of the solution?
The Molarity of the solution is 11.9M.
Molarity of the solution is defined as the number of moles of solute per unit volume of solution in liters. The molarity of the solution can be determined by dividing the number of moles of the solute by the volume of the solution in liters.
The formula for molarity is as follows: Molarity (M) = Moles of solute / Volume of solution in liters Moles of HCl present in the solution = (mass of solute) / (molar mass of solute)Molar mass of HCl = 1(atomic mass of H) + 35.5(atomic mass of Cl) = 36.5 g/mol Moles of HCl = 868.8 g / 36.5 g/mol = 23.8 mol Molarity of HCl solution = Moles of HCl / Volume of solution= 23.8 mol / 2.00 L = 11.9 M The molarity of the solution is 11.9 M (Molar).Hence, the solution was 11.9 M HCl.
for more such questions on Molarity.
https://brainly.com/question/31102499
#SPJ11
radioactive decay is a classic first order process. the half-life of 14c is 5,730 yr's. if you started with 0.973 grams of 14c how long would it take to get to 0.00132 gram?
At a first-order disintegration rate, 0.973 grammes of 14C would decompose to 0.00132 grammes in roughly 28,400 years.
Radioactive decay is a first-order process, meaning the rate of decay of a radioactive material is proportional to the amount of that material present. The half-life of 14C is 5,730 years, which means that in that time, half of the original amount of 14C will have decayed.
To determine how long it would take for 0.973 grams of 14C to decay to 0.00132 grams, we need to use the formula for first-order decay:
N(t) = N₀ * e^(-kt)
where N(t) is the amount of material remaining at time t, N0 is the initial amount of material, k is the decay constant, and e is the base of the natural logarithm.
To find k, we can use the half-life equation:
t1/2 = ln(2)/k
Rearranging this equation, we get:
k = ln(2)/t1/2
Substituting the values for 14C, we get:
k = ln(2)/5730 years = 0.000120968 year⁻¹
Now we can use the first-order decay equation to find how long it would take for 0.973 grams of 14C to decay to 0.00132 grams:
0.00132 = 0.973 * e^(-0.000120968t)
Dividing both sides by 0.973 and taking the natural logarithm of both sides, we get:
ln(0.00132/0.973) = -0.000120968t
Solving for t, we get:
t = -ln(0.00132/0.973)/0.000120968 years
t ≈ 28,400 years
Therefore, it would take approximately 28,400 years for 0.973 grams of 14C to decay to 0.00132 grams at a first-order decay rate
To learn more about radioactive decay refer to:
brainly.com/question/1770619
#SPJ4
Find the perimeter.
12 cm
P=
12 cm
Any degree's perimeter equals the sum of its various sides. Since a square has equal lengths each side, its perimeter is four sides. Square's perimeter is specified as 12 cm, hence perimeter = 12 cm. Perimeter = 4 sides.
How is perimeter calculated?It is simple to do this because there really are four of each side length by just increasing the length and width or dividing the outcome by two. perimeter=(length + width)2 is the definition of the perimeter formula.
How does a perimeter appear?The area surrounding an object forms its perimeter. Your home, for instance, has a yard that is enclosed. The fence's length serves as the perimeter. The barrier will be 200 feet long if the area is 25 metres by 50 feet.
To know more about specified visit:
https://brainly.com/question/14137273
#SPJ1
what is the reason for koh reacting with 1-propanol?
A. strong bases react with nucleophiles B. 1-propanol contains a good leaving group C. KOH is a good electrophile and C 1-propanol is a good nucleophile D. OH groups react with each other E. 1-propanol contains proton
KOH reacting with 1-propanol because it contains acidic propanol that gives acid- base reaction.
Acid base reaction is also called as neutralization reaction. It is defined as a chemical reaction in which acid and a base react quantitatively with each other. Neutralization is a type of chemical reaction that involves the exchange of one or more hydrogen ions, H+, between species that may be neutral that is molecules such as water, H2O or electrically charged ions, such as ammonium, NH4+ hydroxide, OH− or carbonate, CO32−. It also includes similar processes that occur in molecules of KOH.
The hydroxide ion of KOH attacks the carbon atom when 1-propanol is combined with KOH that causes the 1-propanol hydroxyl group to be replaced by a new OH- ion from KOH. This is also known as neutralization reaction.
To learn more about Acid base reaction
https://brainly.com/question/30389999
#SPJ4
which structure contributes most to the hybrid? the primary allylic radical is the major resonance structure
The primary allylic radical is the major resonance structure which contributes most to the: hybrid.
What is resonance?The concept of resonance is an important feature of bonding in organic molecules, especially those that are highly conjugated. Resonance happens when there are two or more valid Lewis structures for the same molecule, and the actual electronic distribution is an average of these structures.
Resonance is a characteristic of molecules with alternating pi bonds. The electrons that are delocalized in the pi system are moved around by resonance, resulting in a molecule with a lower energy state. The molecule's actual electronic distribution is not the same as any of the resonance structures, but rather an average of all of them.
What is an allylic radical?An allylic radical is a radical species that is bonded to an allylic position. Alkene molecules that have at least one double bond and one or more adjacent carbon atoms to the double bond, which is called an allylic position. The carbon-carbon double bond is stabilized by the allylic position.
As a result, when a radical is placed on an allylic carbon, it is often more stable than when it is placed on a non-allylic carbon. As a result, the radical is more likely to form at an allylic carbon than at a non-allylic carbon.
To know more about "Resonance" refer here:
https://brainly.com/question/11331041#
#SPJ11
calculate the volume of 6.0 m hydrochloric acid solution that is needed to prepare 500 ml of a 10m hydrochloric solution
The volume of 6.0 m hydrochloric acid solution that is needed to prepare 500 ml of a 10m hydrochloric solution is 830 ml.
Hydrochloric acid (HCl) is a colorless, corrosive, and pungent gas with a formula of HCl. It is a compound of hydrogen and chlorine. Hydrochloric acid has a wide range of applications, including the production of plastics, dyes, and fertilizers, as well as in the manufacture of rubber and textiles.
To calculate the volume of 6.0 m hydrochloric acid solution required to prepare 500 ml of a 10m hydrochloric acid solution, we need to use the equation:
M1V1 = M2V2
Where M1 is the initial concentration, V1 is the initial volume, M2 is the final concentration, and V2 is the final volume.
We will first calculate the amount of HCl present in the 10m hydrochloric acid solution:
M2 = 10m
V2 = 500 ml = 0.5 L
n = M2 x V2
n = 10m x 0.5 L
n = 5 moles
The quantity of HCl required to produce a 10m solution is 5 moles.
Now, we will use the above equation to determine the volume of the 6.0 m hydrochloric acid solution required to make a 10m hydrochloric acid solution:
M1 = 6.0 m
M2 = 10m
V2 = 0.5 L
M1V1 = M2V2
6.0 m x V1 = 10m x 0.5 L
V1 = (10m x 0.5 L) / 6.0 m
V1 = 0.83 L or 830 ml
Thus, 830 ml of 6.0 m hydrochloric acid solution is needed to prepare 500 ml of 10m hydrochloric acid solution.
For more such questions on Volume.
https://brainly.com/question/30737458#
#SPJ11
if a chemist calculates the maximum amount of product that could be obtained in a chemical reaction, he or she is calculating the____
Answer: theroretical yield
Explanation:If a chemist calculates the maximum amount of product that could be obtained in a chemical reaction, he or she is calculating the... theroretical yield.
Answer:
theroretical yield
Explanation:
Carbon monoxide when combines with haemoglobin it is termed as___.A CarboxyhemoglobinB OxyhaemoglobinC DeoxyhemoglobinD None of these
Carbon monoxide when combines with hemoglobin it is termed as carboxyhemoglobin.
Carbon monoxide is a poisonous gas found in the atmosphere as a result of fuel and industrial emissions. When carbon monoxide is inhaled, it combines readily with the hemoglobin present in the human blood to form carboxyhemoglobin.
Hemoglobin is the protein that is found in the red blood cells of the body. Its primary function is to transport oxygen from the lungs to other tissues in the human body. Binding of carbon monoxide to hemoglobin leaves no space for oxygen to bind with hemoglobin. This results in toxication inside the body.
To know more about hemoglobin here
https://brainly.com/question/31234364
#SPJ4
what is the specific rotation of a compound that has an observed rotation of 25.0° when the concentration is 5 g/ml and the pathlength is 1 dm?
The specific rotation of a compound that has an observed rotation of 25.0° when the concentration is 5 g/ml and the pathlength is 1 dm is 0.5°·mL/g·cm.
How to find the specific rotation of a molecule?The specific rotation of a compound can be calculated using the formula:
Specific Rotation = [α] = Observed Rotation / (Concentration × Pathlength)
In this case, the observed rotation is 25.0°, the concentration is 5 g/mL, and the path length is 1 dm. Plugging these values into the formula, we get:
Specific Rotation = [α] = 25.0° / (5 g/mL × 1 dm)
Since 1 dm = 10 cm, we need to convert the pathlength to cm:
Specific Rotation = [α] = 25.0° / (5 g/mL × 10 cm)
Specific Rotation = [α] = 25.0° / 50 g·cm/mL
Specific Rotation = [α] = 0.5°·mL/g·cm
So, the specific rotation of the compound is 0.5°·mL/g·cm.
To know more about Specific Rotation:
https://brainly.com/question/30888051
#SPJ11
Which of the following are end-products of glycolysis?
a. CO2 and H2O
b. Pyruvate, CO2, and ATP
c. Pyruvate, NADH, and ATP
d. Acetyl CoA, CO2, and NADH
e. Citrate, H2O, and FADH 2
The end-products of glycolysis include Pyruvate, NADH, and ATP. Therefore, option C is the correct answer.
Glycolysis is the metabolic pathway that occurs in the cytoplasm of the cell, which plays a vital role in the energy production process. It is also known as the Embden-Meyerhof pathway, and it takes place in the absence of oxygen during cellular respiration.Glycolysis involves the breakdown of glucose into two three-carbon molecules called pyruvate. During the process, a net amount of two molecules of ATP, two molecules of NADH, and two molecules of pyruvate are produced.
The pyruvate is then transported to the mitochondria, where it is further broken down to generate more ATP molecules.
The overall reaction of Glycolysis is:
[tex]Glucose + 2 NAD^+ + 2 ADP + 2 Pi ⇒2 pyruvate + 2 ATP + 2 NADH + 2 H^+ + 2 H_2O[/tex]
Therefore, The end-products of Glycolysis include: Two molecules of Pyruvate. Two molecules of ATP (Adenosine Triphosphate) are produced. NADH (Nicotinamide Adenine Dinucleotide), which is a high-energy electron carrier, is also produced in glycolysis. hence c option is correct .
To know more about Glycolysis refer here :
https://brainly.com/question/30591040
#SPJ11
The mass percent of a three-component gas sample is 22.70% O2, 21.00% C2H2F4, and 56.30% C6H6. Calculate the partial pressure (atm) of C2H2F4 if the total pressure of the sample is 1444 torr. with work shown for me to be able to understand it please and thank you
The partial pressure (atm) of C₂H₂F₄, given that the total pressure of the sample is 1444 torr, is 0.399 atm
How do i determine the partial pressure of C₂H₂F₄?First, we shall convert 1444 torr to atm. Details below:
760 torr = 1 atm
Therefore,
1444 torr = 1444 / 760
1444 torr = 1.9 atm
Finally, we shall determine the partial pressure of C₂H₂F₄. This can be obtained as illustrated below:
Percentage of O₂ = 22.70%Percentage of C₂H₂F₄ = 21%Percentage of C₆H₆ = 56.30%Total percentage = 22.7 + 21 + 56.3 = 100%Total pressure = 1.9 atmPartial pressure of C₂H₂F₄ =?Partial pressure of C₂H₂F₄ = (percentage of C₂H₂F₄ / total percent) × total pressure
Partial pressure of C₂H₂F₄ = (21 / 100) × 1.9
Partial pressure of C₂H₂F₄ = 0.399 atm
Thus, we can conclude that the partial pressure of C₂H₂F₄ is 0.399 atm
Learn more about partial pressure:
https://brainly.com/question/15577259
#SPJ1
describe the appearance of the polystyrene that you made. describe the appearance of the glyptal resin. compare the properties of glyptal with those of polystyrene.
The polystyrene that was made was a white, semi-transparent solid material.
polystyrene had a smooth texture and was lightweight, yet rigid. It was easily cut and shaped into various forms.The glyptal resin was a slightly yellowish, transparent liquid. It had a thick consistency, similar to that of honey or syrup.The properties of glyptal are quite different from those of polystyrene. Glyptal is much more malleable and can be used to form various shapes and forms. It is also much more heat resistant than polystyrene, and is ideal for use in applications which require the material to withstand high temperatures. On the other hand, polystyrene is much lighter and more rigid, making it ideal for creating objects with precise shapes and dimensions.
learn more about polystyrene Refer:brainly.com/question/20740898
#SPJ1
explain the impact of resource distribution including examples of population distribution, human migration and trade
Answer:
Resource distribution plays a significant role in shaping the world we live in. Uneven distribution of resources such as food, water, energy, and raw materials can lead to various consequences such as population distribution, human migration, and trade.
Population distribution: The uneven distribution of resources can lead to the unequal distribution of people. People tend to settle in areas where resources are abundant, such as near water sources, fertile land, and mineral-rich regions. For example, many coastal cities have high population density due to easy access to water, fishing, and shipping opportunities. On the other hand, areas with scarce resources such as deserts, mountains, and polar regions have lower population density.
Human migration: Resource distribution is also a significant factor that drives human migration. People move from one place to another in search of better opportunities, such as jobs, education, and a better quality of life. For instance, rural people may migrate to urban areas in search of jobs, while people in resource-poor regions may migrate to resource-rich areas to improve their livelihoods. Climate change and natural disasters may also cause migration, such as people moving from drought-affected regions to regions with better water availability.
Trade: The distribution of resources also affects trade between regions and countries. Countries with abundant natural resources such as oil, gas, and minerals can export them to other countries, generating revenue and creating jobs. On the other hand, countries with scarce resources may import them from other countries, creating trade relationships. Trade allows countries to specialize in producing goods and services in which they have a comparative advantage and trade them for goods and services they do not produce efficiently.
In conclusion, the distribution of resources has a significant impact on various aspects of our lives, including population distribution, human migration, and trade. Unequal distribution of resources can lead to inequality and conflict, while a balanced distribution can promote economic growth and stability.
(Please could you kindly mark my answer as brainliest you could also follow me so that you could easily reach out to me for any other questions)
what statement about the spontaneity of a reaction and the rate of a reaction is true? a spontaneous reaction is always a slow reaction.
The statement "a spontaneous reaction is always a slow reaction" is not true.
What is spontaneous reaction ?The spontaneity of a reaction refers to whether the reaction will occur spontaneously or not, without the input of external energy or work. A spontaneous reaction has a negative change in Gibbs free energy (∆G) indicating that the reaction is thermodynamically favorable.
On the other hand, the rate of a reaction refers to how fast the reaction occurs. The rate of a reaction depends on factors such as the activation energy of the reaction the concentrations of the reactants and the presence of catalysts or inhibitors.
Therefore, whether a reaction is spontaneous or not has no direct relationship to its rate. A spontaneous reaction can occur at a fast or slow rate, depending on the specific reaction conditions. Similarly a non-spontaneous reaction can also occur at a fast or slow rate if sufficient energy or activation energy is supplied to the reaction.
Learn more about spontaneous reaction here : brainly.com/question/29315358
#SPJ1
pah is an acronym for polycyclic aromatic hydrogen
The given statement "PAH is an acronym for polycyclic aromatic hydrogen" is true because it is the Polycyclic Aromatic Hydrocarbons.
The Polycyclic Aromatic Hydrocarbons that is the (PAHs) are the class of the chemicals that will occur naturally in the coal, crude oil, and the gasoline. They will result from the burning coal, oil, gas, the wood, the garbage, and the tobacco. The PAHs can be bind to or form the small particles in the air.
These compounds are the range from the simple two ring compounds such as the naphthalene and the its derivatives to the more intricate ring structures with the up to the 10 rings.
To learn more about polycyclic aromatic here
https://brainly.com/question/15060847
#SPJ4
what is the mass of 1.50 moles of sodium hydroxide
Answer:
1 mole= 39.997 grams/moles, so you would have to do 40*1.5 to get to 60 Grams
60 is your answer
Explanation:
It was not allowing me to answer but now it is, so yea
as silica would be deactivated by water, what real-life experiences tell you that it is best to keep silica tlc plates stored in a desiccator? that it, where in real life have you purchased a product that was stored with silica? what is the use of silica gel in those products?
a. In real life, one might have purchased a product stored with silica, such as electronics or leather goods, to name a few.
b The use of silica gel in these products is to absorb moisture and prevent damage to the product due to moisture.
What is silica?Silicа, or silicon dioxide ([tex]SiO_{2}[/tex]), is а chemicаl compound thаt is ubiquitous in nаture. It is one of the most prevаlent minerаls on the eаrth's surfаce, found in rocks, sаnd, аnd soil. The mаjority of silicа is found in its crystаlline form, which is clаssified аs quаrtz. When silicа is hydrаted, it becomes silicon dioxide hydrаte, which is а wаter-аbsorbing substаnce.
Silicа gel is used in electronic devices such аs cаmerаs, smаrtphones, аnd tаblets to protect them from moisture dаmаge. Silicа gel is also used in leаther goods such аs shoes аnd hаndbаgs to prevent moisture dаmаge. Silicа gel is used in medicine pаckаging to prevent moisture from spoiling the medicine.
Learn more about silica gel:
https://brainly.com/question/30009290
#SPJ11