Positive work is done when an object is moved in a positive direction. When an object is moving in the same direction as the force being applied, this is considered positive work. As an illustration, an object falling to the ground does so in the direction of gravity.
The work is referred to be positive work done since gravity is pushing downward in the direction of the falling object. Every force used to move an object in a particular direction constitutes work. We distinguish between positive and negative work done based on whether an object moves in the direction of the force or away from it. Work performed is considered to be 0 if there is absolutely no displacement. It is crucial to keep in mind that whereas force and displacement are both vector concepts, work is a scalar quantity.
Learn more about positive work here:
https://brainly.com/question/10063455
#SPJ4
, a light wave along ray r1 reflects once from a mirror and a light wave along ray r2 reflects twice from that same mirror and once from a tiny mirror at distance l from the bigger mirror. (neglect the slight tilt of the rays.) the waves have wavelength 620 nm and are initially in phase. (a) what is the smallest value of l that puts the final light waves exactly out of phase? (b) with the tiny mirror initially at that value of l, how far must it be moved away from the bigger mirror to again put the final waves out of phase?
The smallest value of l that puts the final light waves exactly out of phase is 310 nm. To make the final waves out of phase again, the tiny mirror must be moved away from the larger mirror, which is a quarter of the wavelength or λ/4 or 155 nm.
A light wave along ray r1 reflects once from a mirror and a light wave along ray r2 reflects twice from that same mirror and once from a tiny mirror at distance l from the bigger mirror. (neglect the slight tilt of the rays.) the waves have wavelength 620 nm and are initially in phase.
(a)
Wavelength λ = 620 nm
∆φ = 180° = π radians
r1, r2, l= Unknown
To make the final light waves exactly out of phase, there is a need to create a phase difference of 180° or π radians between them. As the mirror is perpendicular to the incoming ray, there is no phase shift due to reflection.
As per the question, Wave along r1 reflects once from a mirror.
There is no phase shift due to reflection. Wave along r2 reflects twice from that same mirror.
So, there is a phase shift of π radians or 180° due to reflection.
A light wave along ray r2 reflects once from a tiny mirror at distance l from the bigger mirror. So, there is an additional phase shift due to reflection from the tiny mirror which is equal to 2πl/λ.
As the waves are initially in phase, there is no phase shift due to path difference. Let’s find the smallest value of l to make the final waves exactly out of phase.
∆φ = π radians or 180°
2πl/λ = π
or, l = λ/2 = 620/2 = 310 nm
Thus, the smallest value of l that puts the final light waves exactly out of phase is 310 nm.
(b) The tiny mirror must be moved away from the bigger mirror to make the final waves out of phase again. Initially, the waves were in phase. The waves can be made in phase or out of phase by adjusting the distance between the mirrors as this distance affects the path difference.
As the phase difference between the two waves is 180° or π radians, the waves can be made out of phase by adding a path difference of λ/2 or 310 nm. So, the tiny mirror must be moved away from the bigger mirror by λ/4 or 155 nm to put the final waves out of phase again.
So, the tiny mirror must be moved away from the bigger mirror by 155 nm to put the final waves out of phase again.
For more such questions on Light waves.
https://brainly.com/question/9762777#
#SPJ11
Jeriah places two metal cubes in contact with each other. Energy and heat flow from Cube A to Cube B. What conclusion can be drawn regarding Cube A?
It is cooler than Cube B.
It is smaller than Cube B.
It is warmer than Cube B.
It is larger than Cube B.
Answer:
C. It is warmer than Cube B.
Explanation:
Option C would be correct because energy as heat flows from warmer objects to cooler objects. If heat flows from Cube A to Cube B, then Cube A must be warmer than Cube B.
Reasoning behind the other option being incorrect:
D: This is incorrect because the direction of heat flow does not depend on the relative size of the cube.
A: This is incorrect because energy as heat would flow from Cube B to Cube A if Cube A is cooler than Cube B.
B: This is incorrect because the direction of heat flow does not depend on the relative sizes of the cubes also.
The movement of crustal plates results from circulating currents in material beneath the crust of the Earth. Which best describes the material which moves the crustal plates?
- hot water
- molten rock
- liquid metal
- solid iron
The correct option is B, The movement of crustal plates results from circulating currents in material beneath the crust of Earth. Molten rock best describes the material which moves the crustal plates.
Molten rock, also known as magma, is a hot, fluid material that exists beneath the Earth's surface. It is composed of a mixture of melted rock, gases, and minerals. Magma is formed when the Earth's mantle or crust melts due to heat and pressure, or when the mantle releases gases that cause rocks to melt.
Magma can have different compositions depending on the type of rock it originated from. For example, basaltic magma is composed of dark, dense rocks and has a low viscosity, which means it flows easily. Andesitic magma, on the other hand, is composed of lighter, more viscous rocks and is less fluid. Lava can flow or explode out of volcanoes, creating new landforms and changing the landscape.
To learn more about Molten rock visit here:
brainly.com/question/30416093
#SPJ4
Complete Question: -
The movement of crustal plates results from circulating currents in material beneath the crust of Earth. Which best describes the material which moves the crustal plates?
a. hot water
b. molten rock
c. liquid metal
d. solid iron
The mineral sample in this graduated cylinder has a mass of
30.4 g. When placed in the cylinder, the water level changed from 60 mL to 64 mL. Calculate
the density
Answer:
Density is defined as mass per unit volume. To calculate the density of the mineral sample, you can divide its mass by its volume. The volume of the mineral sample can be calculated from the change in water level in the graduated cylinder when it was placed in it.
The change in water level is 64 mL - 60 mL = 4 mL. Since 1 mL is equivalent to 1 cm3, this means that the volume of the mineral sample is 4 cm3.
Now that we have both mass and volume of the mineral sample, we can calculate its density:
Density = Mass / Volume
= 30.4 g / 4 cm3
= 7.6 g/cm3
The density of the mineral sample is 7.6 grams per cubic centimeter (g/cm3).
In an electromagnetic wave, how are the magnetic field, the electric field, and the direction of propagation oriented to each other?n electromagnetic wave, how are the magnetic field, the electric field, and the direction of propagation oriented to each other а. All three are parallel to each other and are along the x axis. b. All three are mutually perpendicular to each other. c.The electric field and magnetic fields are parallel to each other and perpendicular to the direction of propagation. d. The magnetic field and direction of propagation are parallel to each other along the y axis and perpendicular to the electric field
In an electromagnetic wave, the electric and magnetic fields are perpendicular to each other and both are perpendicular to the direction of propagation. This is known as transverse polarization. So, the correct option is (b) "All three are mutually perpendicular to each other."
The electric field and magnetic field are in phase and oscillate perpendicular to each other and to the direction of wave propagation. The direction of propagation is the direction in which the wave travels. The wave can travel in any direction perpendicular to the fields. The speed of the electromagnetic wave is determined by the properties of the medium in which the wave is traveling and is given by the equation v = c/n, where c is the speed of light in vacuum and n is the refractive index of the medium.
Electromagnetic waves are a form of energy that can travel through a vacuum and do not require a medium for their propagation. Examples of electromagnetic waves include radio waves, microwaves, infrared radiation, visible light, ultraviolet radiation, X-rays, and gamma rays. Hence, option b is correct.
To know more about electromagnetic wave, here
brainly.com/question/3101711
#SPJ4
If a 50.0-lb tire sample is dragged though a parking lot with a force of 8.0 lbs. , determine the friction coefficient between the tire and the pavement.
A. 0.20
B. 0.16
C. 0.35
D.6.25
Show the work for determining the friction of the tire...show symbolic solution then numerical solution.
To determine the friction coefficient between the tire and the pavement, we need to use the equation for friction. Therefore, the correct answer is option B: 0.16.
Using an example, what is friction force?a) The force produced between surfaces that slide against one another is referred to as the frictional force. b) Since frictional force develops when two surfaces come into contact with one another, it is referred to be a contact force. Walking on the road is an illustration of frictional force.
Friction force = friction coefficient x normal force
where the normal force is the force perpendicular to the surface, which in this case is the weight of the tire (50.0 lb). The friction force is the force required to drag the tire through the parking lot, which is 8.0 lb.
Substituting the given values, we get:
8.0 lb = friction coefficient x 50.0 lb
Solving for the friction coefficient, we get:
friction coefficient = 8.0 lb / 50.0 lb = 0.16
To know more about friction coefficient visit:-
brainly.com/question/30394536
#SPJ1
A hypothetical situation of being stranded on a deserted island without water is often posed to students. A model of a process used to separate salt water into its components is shown here. Justify the use of the flame in the model depicting the separation of the mixture.
Responses
A The flame will burn the salt component of the mixture, leaving only the pure water behind for drinking. This is known as combustion.The flame will burn the salt component of the mixture, leaving only the pure water behind for drinking. This is known as combustion.
B The flame will allow the water to evaporate and be collected in its pure form, leaving the salt component behind. This is known as distillation.The flame will allow the water to evaporate and be collected in its pure form, leaving the salt component behind. This is known as distillation.
C The flame will allow the pure water and salt water to separate into different layers. This is known as density separation.The flame will allow the pure water and salt water to separate into different layers. This is known as density separation.
D The flame will sterilize the water, so that water from the ocean will be consumable. This is known as sanitation.The flame will sterilize the water, so that water from the ocean will be consumable. This is known as sanitation.
Answer:
The use of the flame in the model depicting the separation of the mixture is justified as it allows the water to evaporate and be collected in its pure form, leaving the salt component behind. This is known as distillation.
Explanation:
Option B is the correct answer as it accurately describes the process of distillation. Distillation involves heating the mixture of salt water until it boils and evaporates, leaving behind the salt. The water vapor is then cooled and condensed back into liquid form, resulting in pure water. The flame is used to heat the mixture and allow the water to evaporate. The salt, being a solid, remains behind and can be separated from the pure water. Therefore, the use of the flame in the model is necessary to carry out the process of distillation, which is an effective way to separate salt water into its components in order to obtain pure drinking water.
Which of these best explains the ability of small insects to walk on the surface of still water?
A: Water molecules at the surface experience fewer hydrogen bonds than water molecules within the liquid.
B: The insects' feet are coated with ionic compounds.
C: Water has a very high specific heat.
D: Water molecules near the surface produce more buoyant force than water molecules within the liquid.
Answer: water molecules at the surface experience fewer hydrogen bonds than water molecules within the liquid
Explanation: I took the test
Please Help, I am very grateful!
If an isolated system initially has 50 J of energy, what happens to that amount of energy over time?
The total amount of energy decreases, and it cannot be converted into other forms of energy.
The total amount of energy stays the same, but it can be converted into other forms of energy.
The total amount of energy increases, but it can be converted into other forms of energy.
The total amount of energy decreases, but it can be converted into other forms of energy.
Answer:
an isolated system initially has 50 J of energy, what happens to that amount of energy over time? The total amount of energy decreases, and it cannot be converted into other forms of energy. The total amount of energy stays the same, but it can be converted into other forms of energy. The total amount of energy increases, but it can be The total amount of energy stays the same, but it can be converted into other forms of energy. This is known as the law of conservation of energy, which states that energy cannot be created or destroyed, only transformed from one form to another. So even though the initial 50 J of energy may be converted into other forms of energy over time, the total amount of energy in the isolated system will remain constant.
Consider the mass and velocity values of Object A and B below. Compared to Object B, Object A has _______ momentum.
Object A: m=67 kg v=17m/s
Object B: m=2 kg v=100m/s
The momentum of object B is higher than that of object A.
Is momentum greater the higher the mass, velocity, or both?A system's mass and velocity are multiplied to produce its linear momentum. It is simple to see how momentum relates to an object's mass and speed. As a result, an object's momentum grows as its mass or speed increases.
Mass times speed equals momentum.
Object A: momentum is equal to 67 kg times 17 m/s, or 1139 kg/m/s.
Object B's momentum is equal to 2 kg times 100 m/s, or 200 kg/m.
Given that momentum is directly inversely proportional to both mass and velocity, object B has more momentum than object A since its lower mass is more than offset by its much higher velocity.
To know more about momentum visit:-
https://brainly.com/question/30677308
#SPJ1
how much does it cost to operate a 120-w lightbulb for 25 min if the cost of electricity is $0.086 per kilowatt-hour?
Answer:
120 W * 25/60 hr = 50 Whr = .05 kwh
.05 kwr * $.086 / kwr =$ .0043 = .43⊄
If a lightbulb of 120-w operate for 25 min then the cost of electricity is $0.086 per kilowatt-hour is $4.3.
What is energy ?Energy is nothing but the ability to do work. there are different energies in different form which are thermal energy, mechanical energy, electric energy and sound energy etc. According to first law of thermodynamic, Energy neither be created nor be destroyed. it can only be transferred from one form into another form. Energy is expressed in joule (J). its dimensions are [M¹ L² T⁻²]. Energy is conserved throughout the motion, according to conservation law of energy, initial energy is equal to final energy.
Power is given by,
P = Work/time.
Given,
Power P = 120 W
Time t = 25 min = 25/60 = 0.416 hr
Total energy needed for the bulb to run 25min is,
Work = Power × time.
Work = 120 W × 0.416 hr.
Work = 50 W-hr
Total cost = 50 W-hr × $0.086 per kilowatt-hour = $4.3
To know more about Energy :
https://brainly.com/question/1932868
#SPJ2.
Which of the following has a higher kinetic energy?
A 1000 kg car rolling at a speed of 5 m/s across the floor or a 1500 kg hippo swimming at a speed of 2 m/s
the hippo
their kinetic energies are equal
not enough information to determine
the car
Answer:
To solve the problem, we need to use the formula for kinetic energy:
KE = (1/2) * mass * velocity^2
For the car:
KE = (1/2) * 1000 kg * (5 m/s)^2 = 12,500 J
For the hippo:
KE = (1/2) * 1500 kg * (2 m/s)^2 = 3000 J
Therefore, the car has a higher kinetic energy:
Answer: The car.
how coulomb's law is the scientific concept explaining the intraparticle relationship between electrons and protons:
Coulomb's Law states that the force between two charged particles is directly proportional to the product of their charges and inversely proportional to the square of the distance between them.
In the context of atoms, electrons (negatively charged) and protons (positively charged) experience an attractive force, which helps maintain the stability of the atom. The Coulomb force, also known as Coulomb's law, is an essential concept in physics. Coulomb's law describes the force between two charged particles based on their charges and the distance between them. Coulomb's law of electrostatics is a fundamental law in physics that describes the relationship between electrically charged particles.
Coulomb's law is a simple equation that states that the force between two charges is proportional to the product of their charges and inversely proportional to the square of the distance between them. In other words, Coulomb's law can be used to determine the force of attraction or repulsion between charged particles, such as electrons and protons, based on their charges and separation distance.
Know more about Coulomb's Law here:
https://brainly.com/question/506926
#SPJ11
(9\%) Problem 1: A disk of massMand radiusR, a hoop of mass2Mand radiusR, and a ball of massMand radius2Rare rolling without slipping. The hoop can be treated as a thin ring and the ball should be modeled as a hollow sphere.25%Part (a) The objects are rolling on a flat surface with the same linear speed. Which have the same angular speed? Choose the best answer. Disk and Hoop✓Correct!25%Part (b) The objects are rolling on a flat surface with the same angular speed. Which have the same linear speed? Choose the best answer. Disk and Hoop✓Correct!25%Part (c) Which of the objects has the smallest moment of inertia? Choose the best answer. Disk 、 Correct!▹25%Part (d) The objects are placed at the top of an incline and released from rest. Assuming that the objects roll without slipping, which one is first reach the bottom of the incline? Choose the best answer. \begin{tabular}{llll} \hline Hints: & deduction per hint. Hints remaining: 2 & Feedback: & deduction per feedback. \end{tabular}
Beforehand to hit the bottom will be the disk. The measure of matter contained inside a molecule or item is indicated by its mass, which is represented either by symbol m.
There in International System (SI), the kilogram serves as the default unit of mass (kg). The item moving with the greatest acceleration would descend first. Currently, the formula for any object's acceleration while simply rolling down a slope is
[tex]a = \frac{gsin(theta)}{1 +\frac{1}{MR_{2} } }[/tex]
where is the inclined plane's angle and g is the gravitational acceleration. The body's radius, mass, and inertia time are all represented by the letters M and R, respectively.
speed of a disk is calculated.
Given
1) Mass [tex]= M[/tex]
2) Radius [tex]= R[/tex]
3) [tex]I = \frac{1}{2}MR_{2}[/tex] ⇒ [tex]\frac{1}{MR_{2} } = \frac{1}{2}[/tex]
Hence, disk acceleration [tex]a^{d}[/tex]
[tex]a = \frac{gsin(theta)}{1 + 0.5}[/tex]
[tex]a = \frac{2}{3} gsin (theta)[/tex]
Hoop acceleration calculations
Given:
1) Mass [tex]= 2M[/tex]
2) Radius [tex]= R[/tex]
3) [tex]I = 2MR_{2}[/tex] ⇒ [tex]\frac{1}{2MR_{2} }[/tex] [tex]= 1[/tex]
acceleration [tex]ah[/tex]
[tex]ah = \frac{gsin(theta)}{1 + 1}[/tex]
[tex]ah = \frac{1}{2} gsin (theta)[/tex]
Estimating the ball's acceleration
Given :
1) Mass = [tex]=M[/tex]
2) Radius [tex]= 2R[/tex]
3) [tex]I = \frac{2}{3} M(2R)_{2}[/tex] ⇒ M [tex]\frac{1}{M (2R)2} = \frac{2}{3}[/tex]
acceleration [tex]ab[/tex]
[tex]ab = \frac{gsin(theta)}{1 + \frac{2}{3} }[/tex]
[tex]ab = \frac{3}{5} gsin (theta)[/tex]
By comparing, we obtain [tex]ad[/tex] ≥ [tex]ab[/tex] ≥ [tex]ah[/tex] therefore disk would reach the bottom initially.
To know more about mass click here
brainly.com/question/30337818
#SPJ4
a circular swimming pool has a diameter of 16 m, the sides are 4 m high, and the depth of the water is 3 m. how much work (in joules) is required to pump all of the water over the side?
The work required to pump all the water over the side of the circular swimming pool having a diameter of 16 m and height of 4 m is 23,644852 joules.
To calculate the amount of work required to pump all the water over the side, we need to find the volume of water in the pool first.
The pool is circular, so we can use the formula for the volume of a cylinder:
The volume of water [tex]= \pi r^2h[/tex]
where r is the radius of the pool and h is the depth of the water.
The diameter of the pool is 16 m, so the radius is half of that or 8 m. The depth of the water is 3 m.
Therefore, the volume of water in the pool is:
Volume of water [tex]= \pi (8 \ m)^2(3\ m) = 603.18 \ m^3[/tex]
To pump all of the water over the side, we need to raise it to a height of 4 m (the height of the sides of the pool).
The potential energy required to raise an object of mass m to a height h is given by the formula:
Potential energy = mgh
where g is the acceleration due to gravity, which is approximately [tex]9.8\ m/s^2[/tex].
The mass of the water is given by its density (which is approximately [tex]1000 \ kg/m^3[/tex]) times its volume:
Mass of water = density x volume = [tex]1000 \ kg/m^3 \times 603.18 \ m^3 = 603185 \ kg[/tex]
So the amount of work required to pump all of the water over the side is:
Potential energy = mgh [tex]= 603185 \ kg \times 9.8 \ m/s^2 \times 4 \ m = 23,644852 \ J[/tex].
Therefore, it would take approximately 23,644852 J million joules of work to pump all of the water over the side of the pool.
Learn more about potential energy:
https://brainly.com/question/21175118
#SPJ11
the general process in which solid particles form from a gas is called ____________.
a. Acceretion
b. Solifluction
c. Sublimation
d. condensation
The general process in which solid particles form from gas is called sublimation (option C).
Each substance has three phases it can change into; solid, liquid, or gas. There are six ways a substance can change between these three phases; melting, freezing, evaporating, condensing, sublimation, and deposition. These processes are reversible and each transfers between phases differently:
Melting: The transition from the solid to the liquid phaseFreezing: The transition from the liquid phase to the solid phaseEvaporating: The transition from the liquid phase to the gas phaseCondensing: The transition from the gas phase to the liquid phaseSublimination: The transition from the solid phase to the gas phaseDeposition: The transition from the gas phase to the solid phaseLearn more about sublimation: https://brainly.com/question/28626755
#SPJ11
what should the fire investigator do to reduce the potential of electric shock or the inadvertent release of fuel gas during the scene examination?
Fire investigator should take following precautions: Ensure scene is safe, use appropriate personal protective equipment, follow proper ventilation procedures, use appropriate equipment and follow proper protocols.
What does the fire investigator do to reduce the potential of electric?The fire investigator should take the following precautions:
Ensure the scene is safe: Before entering the scene, investigator should ensure that all power sources to the area have been disconnected or secured.
Use appropriate personal protective equipment: The investigator should wear appropriate personal protective equipment, like rubber gloves and boots, to protect against electric shock and chemical exposure.
Follow proper ventilation procedures: If fuel gas is suspected to be present, investigator should ensure proper ventilation of the area to prevent buildup of flammable or explosive vapors.
Use appropriate equipment: Investigator should use specialized equipment designed for use in hazardous environments.
Follow proper protocols: Investigator should follow proper protocols for conducting a scene examination, including documenting the scene, collecting and preserving evidence and conducting interviews with witnesses and others involved in the incident.
To know more about electric shock, refer
https://brainly.com/question/28361869
#SPJ1
a 25.0kg child jumps to the ground from a structure 1.00m high and comes to rest 0.500s after first contact with the ground. what average force is applied by the child in coming to rest
Answer:
Approximately [tex]470\; {\rm N}[/tex].
(Assuming that [tex]g = 9.81\; {\rm N \cdot kg^{-1}}[/tex] and that air resistance is negligible.)
Explanation:
Under the assumptions, the acceleration of the child would be constantly [tex]a = g = 9.81\; {\rm N \cdot kg^{-1}} = 9.81\; {\rm m\cdot s^{-2}}[/tex] while the child was in the air.
Apply the SUVAT equation [tex]v^{2} - u^{2} = 2\, a\, x[/tex] to find the velocity [tex]v[/tex] of the child right before landing:
[tex]\begin{aligned}v &= \sqrt{u^{2} + 2\, a\, x}\end{aligned}[/tex], where:
[tex]u = 0\; {\rm m\cdot s^{-1}}[/tex] is the initial velocity of the child,[tex]a = 9.81\; {\rm m\cdot s^{-2}}[/tex] is the vertical acceleration, and[tex]x = 1.00\; {\rm m}[/tex] is the vertical displacement (change in height.)The child is at rest [tex]\Delta t = 0.500\; {\rm s}[/tex] after contact. During that [tex]0.500\; {\rm s}[/tex], velocity would have changed by [tex]\Delta v = \sqrt{u^{2} + 2\, a\, x}[/tex]. Momentum of the child would have changed by [tex]\Delta p = m\, \Delta v[/tex], where [tex]m = 25.0\; {\rm kg}[/tex] is the mass of the child.
Divide this change in momentum by the duration [tex]\Delta t[/tex] to find the average net force:
[tex]\displaystyle F_{\text{net}} = \frac{m\, \Delta v}{\Delta t}[/tex].
There are two forces on the child: upward normal force from the ground [tex]F_{\text{normal}}[/tex] and downward gravitational attraction [tex]m\, g[/tex] from the Earth. The resultant force on the child points upwards:
[tex]F_{\text{net}} = F_{\text{normal}} - m\, g[/tex].
Rearrange this equation to find the normal force on the child:
[tex]\begin{aligned}F_{\text{normal}} &= F_{\text{net}} + m\, g \\ &= \frac{m\, \Delta v}{\Delta t} + m\, g \\ &= \frac{m\, \sqrt{2\, a\, x + u^{2}}}{\Delta t} + m\, g\\ &= \frac{(25.0)\, \sqrt{2\, (9.81)\, (1.00) + 0^{2}}}{0.500}\; {\rm N} + (25.0)\, (9.81)\; {\rm N}\\ &\approx 470\; {\rm N}\end{aligned}[/tex].
This normal force from the ground on the child is the reaction to the force that the child exerted on the ground. The two forces will have the same magnitude: approximately [tex]470\; {\rm N}[/tex]. Hence, the child would have exerted an average force of approximately [tex]470\; {\rm N}\![/tex] on the ground during that [tex]0.500\; {\rm s}[/tex].
Peter is heating water on the stove to boil eggs for a picnic. If it takes 800 kcal to heat his vat of water from 20◦C to 100◦C, how much water did he have?
Answer:
Explanation:
The amount of heat energy required to raise the temperature of a given mass of a substance is given by the specific heat capacity of the substance. For water, the specific heat capacity is approximately 1 calorie/gram °C or 4.184 joule/gram °C.
To determine the mass of water Peter heated, we can use the following formula:
Q = m * c * ΔT
where Q is the amount of heat energy, m is the mass of the substance, c is the specific heat capacity, and ΔT is the change in temperature.
In this case, Q is given as 800 kcal, or 800,000 calories, and the change in temperature, ΔT, is 100°C - 20°C = 80°C.
Using the specific heat capacity of water, c = 1 calorie/gram °C, we can rearrange the formula to solve for the mass, m:
m = Q / (c * ΔT)
Substituting the given values, we get:
m = 800,000 calories / (1 calorie/gram °C * 80°C)
m = 800,000 grams
m = 800 kg
Therefore, Peter heated 800 kg, or 800 liters, of water.
a positive charge is placed at rest at the center of a region of space in which there is a uniform electric field. (a uniform field is one whose strength and direction are the same at all points within the region.) what happens to the electric potential energy of the system after the charge is released from rest in the uniform electric field?
After the positive charge is released from rest in a uniform electric field, its electric potential energy would be converted to kinetic energy, and hence, the electric potential energy of the system would decrease.
A positive charge is placed at rest at the center of a region of space in which there is a uniform electric field. Electric potential energy is defined as the work done by the electric force in moving a charge from one point to another point against an electric field. The electric potential energy of a system is given by U = qV, where q is the charge, and V is the potential difference. Let the charge be q, and the electric field be E.
The electric force acting on the charge is F = qE. As the charge is at rest, the net force on the charge is zero. As the electric force is the only force acting on the charge, the net work done on the charge is W = ∫Fdx = q∫Edx. As the electric field is uniform, the potential difference is the product of the electric field and the distance. So, the work done on the charge in moving it from the center to a distance r isW = qEr.
The electric potential difference between the center and the point at distance r is V = Er. The electric potential energy of the system is U = qV = qEr. As the charge is at rest at the center, the initial kinetic energy of the system is zero. After the charge is released, the electric force acting on the charge would accelerate the charge. As the electric potential energy of the system is converted to kinetic energy, the electric potential energy of the system would decrease.
To know more about electric potential energy, refer here:
https://brainly.com/question/12645463#
#SPJ11
what would be the path of a positive charge moving from left to right through the pair of oppositely charged electric plates in the diagram?
When a positive charge moves from left to right through a pair of oppositely charged electric plates, it follows a specific path due to the electric field produced by the plates.
The electric plates in the diagram have opposite charges. The top plate is positively charged, while the bottom plate is negatively charged. When a positive charge is placed in the electric field, it experiences a force that pushes it towards the negative plate. This is because opposite charges attract each other.
The path that the positive charge follows depends on the strength of the electric field and the speed at which it is moving. If the electric field is weak, the positive charge will not experience a significant force and will move in a straight line from left to right. However, if the electric field is strong, the positive charge will experience a stronger force and will curve towards the negative plate.
The direction of the force can be determined using the right-hand rule. If the positive charge is moving from left to right and the electric field is pointing down (from the positive plate to the negative plate), then the force on the charge will be towards the center of the plates (in the direction of the negative plate).
In summary, the path of a positive charge moving from left to right through a pair of oppositely charged electric plates depends on the strength of the electric field and the speed at which it is moving. If the electric field is weak, the charge will move in a straight line. If the electric field is strong, the charge will curve towards the negative plate. The direction of the force can be determined using the right-hand rule.
For more such questions on Electric plates.
https://brainly.com/question/30389506#
#SPJ11
diana raises a 1000 n piano a distance of 5.00 m using a set of pulleys. she pulls in 20.0 m of rope. if the actual force is 300 n, what is the actual mechanical advantage?
The actual mechanical advantage is 6.67 .
Mechanical advantage is the ratio of the output force to the input force in a machine. It is a ratio that specifies the multiple by which the input force is increased to produce the output force.
MA = Output Force / Input Force
Now, let's solve the given problem:
Input Force = 300 N
Output Force = ? , MA = ? , MA = Output Force / Input Force
Output Force = MA × Input Force
Output Force = (1000 N / 300 N) × Input Force
Output Force = 3.33 × Input Force
Diana pulled in 20 m of rope, thus the rope multiplied her force.
Therefore, the distance moved by the rope is the input distance, and the distance moved by the piano is the output distance.
Output Distance / Input Distance = MA
Output Distance = 5 m
Input Distance = 20 m
MA = Output Distance / Input Distance
MA = 5 m / 20 m
MA = 0.25MA = 1 / 0.25MA = 4
Output Force = MA × Input Force
Output Force = 4 ×300 N
Output Force = 1200 N
The actual mechanical advantage is equal to the output force divided by the input force. This is also equal to the number of times the machine increases the force applied to it.
So, Actual mechanical advantage = Actual output force / Actual input force = 300 N / (1200 N / 3.33)Actual mechanical advantage = 6.67 .Hence, the actual mechanical advantage is 6.67.
To know more about Mechanical advantage refer here :
https://brainly.com/question/9086278
#SPJ11
a musician is tuning her cello (a string instrument) to the key of c, so that the string vibrates at a frequency of 65.4 hz when played. the string is fixed on both ends, is 0.600 m long, and weighs 0.141 n. if she wants to raise the frequency to sound a d (73.4 hz) rather than c, what percentage increase in tension is needed?
The musician needs to increase the tension in the string by approximately 29.9% to raise the frequency from C to D.
To raise the frequency of a string, a musician can change the tension on the string.
The relationship between the frequency of a string and its tension can be described by the following equation:
f = (1/2L) x [tex]\sqrt{(T/\mu)}[/tex]
where f is the frequency,
L is the length of the string,
T is the tension in the string,
and μ is the linear mass density of the string (mass per unit length).
In this scenario, the musician wants to raise the frequency of the string from 65.4 Hz to 73.4 Hz by changing the tension on the string.
The length of the string is fixed at 0.600 m, and the mass of the string is given as 0.141 N.
We can start by using the given values to solve for the initial tension in the string when it is tuned to C.
Rearranging the equation above and plugging in the given values, we get:
T = [tex]\mu \times (2Lf)^2[/tex]
where μ = m/L is the linear mass density of the string,
and f = 65.4 Hz. Plugging in the values, we get:
μ = m/L = 0.141 N / 0.600
m = 0.235 kg/m
T = (0.235 kg/m) [tex](2 \times 0.600 m \times 65.4 Hz)^2[/tex]
= 200.3 N
Now, we want to find the tension in the string that will result in a frequency of 73.4 Hz when the string is played.
Let's call this new tension T'.
Using the same equation as before, we can solve for T':
T' = μ x [tex](2Lf')^2[/tex]
where f' = 73.4 Hz.
We want to find the percentage increase in tension needed to achieve this new frequency, so we can write:
% increase in tension = (T' - T) / T x 100%
Plugging in the values and solving for T', we get:
T' = [tex]\mu \times (2Lf')^2[/tex]
= (0.235 kg/m) x [tex](2 \times 0.600 m \times 73.4 Hz)^2[/tex]
= 260.2 N
So the percentage increase in tension needed is:
% increase in tension = (T' - T) / T x 100%
% increase in tension = (260.2 N - 200.3 N) / 200.3 N x 100% ≈ 29.9%
For similar question on frequency.
https://brainly.com/question/254161
#SPJ11
a 1.25 kg hoop with a radius of 11.1 cm rolls without slipping and has a linear speed of 1.50 m/s. find the translational kinetic energy. answer should have two decimal places.
The translational kinetic energy of the hoop is 1.41 kg·[tex]m^2/s^2.[/tex]
To find the translational kinetic energy of the hoop, we will use the following steps:
Step 1: Identify the given values.
The mass (m) of the hoop is 1.25 kg, and the linear speed (v) is 1.50 m/s.
Step 2: Understand the formula for translational kinetic energy.
The formula for translational kinetic energy [tex](K_t)[/tex] is given by:
[tex]K_t = (1/2)mv^2[/tex]
Step 3: Substitute the given values into the formula.
[tex]K_t = (1/2)(1.25 kg)(1.50 m/s)^2[/tex]
Step 4: Calculate the translational kinetic energy.
[tex]K_t = (0.5)(1.25 kg)(2.25 m^2/s^2)[/tex]
[tex]K_t = 1.40625 kg·m^2/s^2[/tex]
Step 5: Round the answer to two decimal places.
[tex]K_t = 1.41 kg·m^2/s^2[/tex]
For similar question on translational.
https://brainly.com/question/31150078
#SPJ11
what value of magnetic field would make a beam of electrons, traveling to the right at a speed of 4.8
Since we are dividing 0 by a non-zero number, the value of the magnetic field, B, should be 0 T.
This means that no magnetic field is required to maintain the electrons' movement to the right at the given speed.
To determine the value of the magnetic field that would make a beam of electrons traveling to the right at a speed of 4.8, we can use the Lorentz force equation:
F = q * (E + v × B)
Here, F is the Lorentz force, q is the charge of the electron, E is the electric field, v is the velocity of the electron, and B is the magnetic field.
Since we want the magnetic field to make the electrons travel to the right, the magnetic field should be perpendicular to the velocity of the electrons.
This means the Lorentz force will be solely due to the magnetic field (i.e., E = 0).
So, the equation becomes:
F = q * (v × B)
Since we want the electrons to continue moving to the right, the force due to the magnetic field should be balanced by an equal and opposite force.
Therefore, the net force F on the electron should be 0:
0 = q * (v × B)
We need to determine the value of B that satisfies this condition.
To do this, we can rearrange the equation:
B = 0 / (q * v)
The charge of an electron, q, is approximately[tex]-1.6 * 10^-19 C[/tex],.
and the given velocity, v, is 4.8 m/s.
Plugging these values into the equation:
B = [tex]0 / (-1.6 * 10^-19 C * 4.8 m/s).[/tex]
For similar question on magnetic.
https://brainly.com/question/29221352
#SPJ11
The smith family is traveling in their car at 50 km/h due east. Mr. Smith is using cruise control to maintain a constant speed. Describe the net force acting on the Smith car.
A. Net force equals zero.
B. Net forces are unbalanced
C. There is no way to determine net force
D. Net force is positive and to the east
A. Net force equals zero. The net force acting on the Smith car is equal to zero.
The net force acting on a car on cruise control at constant speed.This is because the car is traveling in a straight line at a constant speed, meaning that the forces acting on the car are balanced. The car is being propelled forward by an applied force, such as the engine, and this force is counteracted by the force of friction from the ground. The net force is the sum of all these forces, and since they are all balanced, the net force is also equal to zero.
Cruise control helps maintain a constant speed, as it adjusts the engine power to counteract the changing frictional forces on the car. This ensures that the forces on the car remain in balance, so the net force remains equal to zero.
Learn more about Cruise control here:
https://brainly.com/question/13454690
#SPJ1
Photoelectric effect
7.
A metal surface having a work function of 3.0 eV is illuminated with radiation of wavelength
350nm. Calculate:
a) The threshold frequency (fo) and wavelength (Ao)
b) The maximum kinetic energy of the emitted photoelectrons
a) Calculate the work function (in eV) for a magnesium surface if the minimum frequency of
electromagnetic radiation which causes photoemission from the metal surface is
8.9 x 10¹4 Hz. in Joules
b) If the same surface were illuminated with radiation of wavelength 250 nm, calculate:
i. The maximum kinetic energy,
ii. The maximum velocity, of the emitted photoelectrons
9. When electromagnetic radiation of frequency 1.5 x 1014 Hz is incident on a metal surface, the
maximum kinetic energy of the emitted photoelectrons is found to be 3.8 x 10-20 J. Calculate the
work function of the metal.
10. Photons of electromagnetic radiation having energies of 1.0 eV, 2.0 eV and 4.0 eV are incident on a
metal surface having a work function of 1.7 eV.
a) Which of these photons will cause photoemission from the metal surface?
b) Calculate the maximum kinetic energies (in eV and J) of the liberated electrons in each of
those cases where photoemission occurs.
11. A vacuum photocell connected to a microammeter is illuminated with light of varying wavelength.
a) Explain why:
i. A photoelectric current is registered on the microammeter when light of a certain
wavelength is incident on the photocell.
ii. The current is found to increase with the light intensity is increased.
b) When the incident light wavelength is increased, the photoelectric current falls to zero. decre-
ased.
Explain why:
i. The current falls to zero.
ii. The current would still be zero if the light wavelength is kept the same and the
intensity is increased.
Explanation:
7a) The work function (ϕ) is the minimum energy required to remove an electron from the metal surface. It is related to the threshold frequency (fo) by the equation:
ϕ = hfo
where h is Planck's constant (6.626 x 10^-34 J s).
The threshold wavelength (Ao) can be calculated from the threshold frequency using the equation:
c = λf
where c is the speed of light (3.00 x 10^8 m/s).
Given that the work function of the metal surface is 3.0 eV, we have:
ϕ = 3.0 eV = (3.0 x 1.6 x 10^-19) J fo = ϕ/h = (3.0 x 1.6 x 10^-19) J / (6.626 x 10^-34 J s) ≈ 4.53 x 10^14 Hz Ao = c/fo = (3.00 x 10^8 m/s) / (4.53 x 10^14 Hz) ≈ 661 nm
Therefore, the threshold frequency is 4.53 x 10^14 Hz and the threshold wavelength is approximately 661 nm.
7b) The maximum kinetic energy of the emitted photoelectrons can be calculated using the equation:
KEmax = hf - ϕ
where h is Planck's constant, f is the frequency of the incident radiation, and ϕ is the work function of the metal surface.
The energy of a photon can be calculated from its wavelength using the equation:
E = hc/λ
where h is Planck's constant, c is the speed of light, and λ is the wavelength of the photon.
Given that the wavelength of the incident radiation is 350 nm, we have:
f = c/λ = (3.00 x 10^8 m/s) / (350 x 10^-9 m) ≈ 8.57 x 10^14 Hz E = hc/λ = (6.626 x 10^-34 J s) x (3.00 x 10^8 m/s) / (350 x 10^-9 m) ≈ 1.79 eV
Therefore, the maximum kinetic energy of the emitted photoelectrons is:
KEmax = hf - ϕ = (6.626 x 10^-34 J s) x (8.57 x 10^14 Hz) - (3.0 x 1.6 x 10^-19) J ≈ 1.17 eV
a) The minimum frequency required to cause photoemission is equal to the threshold frequency:
fo = 8.9 x 10^14 Hz
Using the same equation as in part 7a), we can calculate the work function:
ϕ = hf0 = (6.626 x 10^-34 J s) x (8.9 x 10^14 Hz) ≈ 5.90 x 10^-19 J = 3.68 eV
b) i. The maximum kinetic energy of the emitted photoelectrons can be calculated using the same equation as in part 7b):
KEmax = hf - ϕ
The energy of a photon with wavelength 250 nm is:
E = hc/λ = (6.626 x 10^-34 J s) x (3.00 x 10^8 m/s) / (250 x 10^-9 m) ≈ 4.97 eV
Therefore, the maximum kinetic energy of the emitted photoelectrons is:
KEmax = hf -
the higher the r-value, the greater the insulating effectiveness. (1 point) group of answer choices true false
It is true that the higher the R-value, the greater the insulating effectiveness of a material.
True.
The R-value is a measure of a material's insulating effectiveness.
A higher R-value indicates greater insulation effectiveness, as it represents the material's resistance to heat flow.
This means that a material with a high R-value will be more effective at insulating and maintaining temperature differences between the interior and exterior environments.
To provide a concise explanation:
1. R-value measures a material's insulating effectiveness.
2. A higher R-value indicates greater resistance to heat flow.
3. Materials with high R-values are better at insulating and maintaining temperature differences.
For similar question on insulating.
https://brainly.com/question/27813161
#SPJ11
two lightbulbs are wired in series and connected to a 12-volt battery. what happens to the current through the battery if a third bulb is added in series? to the power?
If a third bulb is added in series to two light bulbs wired in series and connected to a 12-volt battery, the current through the battery will decrease and the power will decrease as well.
The voltage of a battery in a circuit is distributed among the bulbs in series. Since there is an increase in the number of bulbs, this means that the voltage of the battery has to be shared among more bulbs.
As a result, the voltage that each bulb receives will be smaller than the voltage received when only two bulbs are in the series.
As a result, the current flowing through the battery will decrease if a third bulb is added in series with two light bulbs wired in series and connected to a 12-volt battery. If a third bulb is added, the resistance in the circuit increases, causing the current to decrease.
The power will also decrease because the power produced in a circuit is proportional to the current and voltage.
This means that the power produced will decrease as the current and voltage decrease due to the addition of a third bulb in the series.
Know more about power here:
https://brainly.com/question/11569624
#SPJ11
a 4 kg particle is moving horizontally at 5 m/s to the right when it strikes a vertical wall. the particle rebounds with at 3 m/s. what is the impulse delivered to the particle?
The impulse is delivered to the particle when a 4 kg particle is moving horizontally at 5 m/s to the right when it strikes a vertical wall and the particle rebounds at 3 m/s is 8 kg m/s to left.
To solve this problem we will use the impulse-momentum theorem. The impulse-momentum theorem states that the change in momentum of an object is equal to the impulse applied to the object. The impulse is the force times the time over which the force acts. The momentum is the mass times the velocity of the object.
The impulse delivered to the 4 kg particle is the change in momentum. The initial momentum of the particle was 4 kg x 5 m/s = 20 kg m/s to the right. After it strikes the wall, its velocity is reversed, so the final momentum is 4 kg x 3 m/s = 12 kg m/s to the left. The impulse is therefore 20 kg m/s to the right - 12 kg m/s to the left is 8 kg m/s.
For more information about impulse refers to the link: https://brainly.com/question/30466819
#SPJ11