Zn(s) + 2HCl(aq) > H2(g) + ZnCl2 (aq)
When 25.0g of Zn reacts, how many mols of HCl are consumed?
A. 0.0171 B. 1.5 C. 0.76 D. 22.4 E. 0.38

Answers

Answer 1

When 25.0g of Zn reacts, mols of HCl are consumed 0.7648 moles HCl

Write down the balanced chemical equation for this one replacement reaction first.

Zn(s)+2HCl(aq)→ZnCl2(aq)+H2(g)↑⏐

Now take note of the 2:1 mole ratio of reaction between the two reactants. This demonstrates that the reaction will always use up two times as much hydrochloric acid as zinc metal.

As you are aware, a solution's molarity indicates the number of moles of solute—in your case, hydrochloric acid, HCl—that are present in one liter of the solution.

The molarity of the hydrochloric acid solution is reported to be

3.05 mol L−1. This indicates that for every 1 L of solution, 3.05 moles of hydrochloric acid are produced. Remember this for later. You are aware that the reaction needs 25.0 g of zinc.

By using the molar mass of zinc, you can convert this mass to moles.

25 g per mole Zn

65.38g = 3.824 moles of zinc

n order for this many moles of zinc to react, you'd need

0.3824moles Zn⋅2amoles

HCl 1 mole Zn=0.7648 moles HCl

Learn more about reaction here-

https://brainly.com/question/17434463

#SPJ9


Related Questions

What does Friar Lawrence do after hearing that Romeo never received his letter in Act V of Romeo and Juliet?
A. Sets off to save Juliet from the tomb
B. Gets to work crafting an antidote for Juliet
C. Runs to find the Nurse to help him
D. Goes searching for Romeo

Answers

Answer:

Friar Laurence's plan of action once he realizes Romeo hasn't received his letter is to be their when juliet wakes up and taker her back to his cell until Romeo is told of the plan. Who is the first person to arrive at Juliet's tomb in Scene 3?

A fungicide dissolved in water was applied to the soil in which a rose plant was growing. It later appeared in the leaves. How did the fungicide reach the leaves?​

Answers

The fungicide reaches to the leaves through the xylem's transpiration pull.

1. The fungicides are the chemicals which are used to removes fungus which on the plants and also stops the growth of fungus present on plants.

2. The fungicides are dissolved in water to make the dilute solution so that when it sprayed on the leaves, it easily absorbed by the soil.

3. The plants have special mechanism which helps in absorption of all the minerals that are present in the soil.

4. The xylem absorb mineral and water in the soil and phloem absorbs nutrients from the soil. Xylem pull ups the solution against the gravity and moves this solution to the surface of the leaves is called transpiration pull.

5. There are 3 mechanism that involved in the movement of fungicide are• Root pressureCohesive forceCapillary action

6. All these forces are worked to pull up the solution upward to the leaves.

Thus the xylem is a specialized mechanism present in the plants to pull up the solution upward against the gravity.

Learn more about Mechanism of Xylem here https://brainly.com/question/13596359

#SPJ9

Name an element in the second period (row) of the periodic table with six 2p electrons

Answers

Answer:

arsenic

Explanation:

So basically it can be seen that the element is arsenic. Yeah. And now we see the element which has 6, 2 p electrons and lies in the 2nd period. So that is basically now because if we observe the electronic configuration of now it has atomic number 10 and its electronic configuration is one has to to s to two P six.

determine the mass in grams of each in each of the following
6.00 mol Al

Answers

Considering the definition of molar mass, there are 162 grams of Al in 6 moles of Al.

Definition of molar mass

The molar mass of substance is a property defined as its mass per unit quantity of substance, in other words, molar mass is the amount of mass that a substance contains in one mole.

Mass of 6 moles of Al

You want to determine the mass in 6 moles of Al. So, being the molar mass of Al is 27 g/mole, you can apply the following rule of three: If by definition of molar mass 1 mole of Al contains 27 grams, 6 moles of Al contains how much mass?

mass= (6 moles× 27 grams) ÷1 mole

mass= 162 grams

In summary, there are 162 grams of Al in 6 moles of Al.

Learn more about molar mass:

brainly.com/question/5216907

brainly.com/question/11209783

brainly.com/question/7132033

brainly.com/question/17249726

#SPJ1

(Each helium atom has two protons. Sketch models
of helium-3 and helium-4, which have approximate masses of 3 amu and 4 amu, respectively. Label and differentiate protons, neutrons, and
electrons in your models.

Answers

In the isotopes of Helium, Helium-3 has 2 electrons, 2 protons and 1 neutron whereas Helium-4 has 2 electron, 2 protons and 2 neutrons in it.

Isotopes are the atoms of same element having same atomic number but different mass number.

Mass number is represented as Z and atomic number is represented as A.

Atomic number = number of protons in the atom = number of electrons in the neutral state of the atom.

Mass number = number of protons + number of neutrons in the atom

so, number of neutrons can be calculated as = Atomic number - number of protons in it

For Helium-3

mass number = 3

and atomic number = 2

so number of electrons = number of protons = atomic number = 2

number of neutrons = mass number - number of protons

                                 = 3-2 = 1

For Helium-4

mass number = 4

and atomic number = 2

so number of electrons =number of protons = 2

number of neutrons = mass number - number of protons = 4-2 = 2

To learn more about isotopes here

https://brainly.com/question/27475737

#SPJ1

A nurse administered 2.70 mL of a radioisotope solution that has an activity of 105 μCi/mL . What total dose of the radioisotope did the patient receive?

Answers

Answer:

283.5 of radioisotopes. Each mL has 105 micrograms, so multiply 105 x 2.70.

A bank roll of 40 coins weighs approximately 0.313 kg. What is the mass in grams of a single coin?

Answers

Answer: .007825

Explanation:

.313 / 40 = .007825

write down any two effect of heat.​

Answers

Answer:

1) Raises the temperature. 2) Increases volume.

A word problem tells you that you have 27.8 moles of carbon dioxide. It asks how
much that is in grams of carbon dioxide.
Luckily, they also supply a conversion factor.
1 mole of carbon dioxide is equal to 44 grams of carbon dioxide.
You set up a conversion equation in the format shown in the image.
What would you
write in the space labeled 'A' in the diagram.
44 grams of carbon dioxide
1 mole of carbon dioxide
27.8 moles of carbon dioxide

Answers

we need to cancel the units

b/c would be equal to 1 to retain the same amount, remember, 1a=a

so

b/c=1mol/44g or 44g/1mol

alrighty

we waant to convert 27.8mols

so therefor a=27.8mol

27.8mol times b/c=D

we want c to be mols and b to be grams so the mols cancel

so thefor c=1mol

it would look like this:

I would write 1 mol of carbon dioxide for C (choice A)

The Minnesota Study is an example of the

Answers

The Minnesota Study is an example of the twins study

The Minnesota twin study of adult development began in 1986 to identify what causes individual differences in aging and study of identical (MZ) and fraternal (DZ) twins allows for estimation of how genes and environment affect the aging process and monozygotic or identical twins because they shared 100% of their inherited genes. Therefore, the researchers assumed that any differences between identical twins raised apart would be due to environment and similarities between identical twins raised apart would be due to genetics and this study proves that allow disentanglement of the shared genetic and environmental factors for the trait of interest.

Know more about  Minnesota Study

https://brainly.com/question/28640291

#SPJ1

How many Rh atoms would have to be placed side by side to span a distance of 6.0 um?

Answers

22202 are the number of atoms to be placed side by side to span a distance of 6.0um.

What are atoms?

The smallest unit of substance into which it is possible to divide without releasing electrically charged particles is the atom.

In addition, it is the smallest unit of matter with chemical element-like characteristics. The atom is thus the fundamental component of chemistry.

An atom of Rhodium (Rh) diameter d = 2.7x[tex]10^{-10}[/tex] m.

Now assuming that keeping n atoms side by side , the distance will be L= 6um = 6.5 x [tex]10^{-6}[/tex] m.

Now, the total length is given by total sum of diameter,

so the equation is given by,

L= nd

n= [tex]\frac{L}{d}[/tex]

n= [tex]\frac{6.0x 10^{-6} m}{2.7x10^{10} } m[/tex]

n= 22202 atoms.

Hence, there are total 22202 Rh atoms have to be placed side by side to span a distance.

To learn more about atoms , refer to the below link:

https://brainly.com/question/23810468

# SPJ1

A certain protein was found to contain 0.793% zinc by mass. Determine the minimum molecular mass of the protein.

Answers

A certain protein was found to contain 0.793% zinc by mass. The minimum molecular mass of the protein is 8264.46 grams.

What is molecular mass?

Molecular mass is the sum of the all atoms of an element. The molecular mass can be calculated by checking the mass of the atom from the periodic table.

In 100 grams of proteins, we have, 0.793% zinc

The molar mass of zinc is 65.3820 g/mol

0.793 / 65.3820 = 0.0121 moles of zinc

So, in 100 grams of protein

1 mole = 100 / 0.0121 = 8264.46 grams / mol

Thus, the minimum molecular mass of the protein is 8264.46 grams.

To learn more about molecular mass, refer to the link:

https://brainly.com/question/18446366

#SPJ1

What is the frequency of this irradiation? (2.54x10^-7) Submit answer in scientific notation using the format 0.00 x 10^0 (e.g. 0.000123 = 1.23 x 10^-4). Omit units and spaces.

Answers

The frequency of an irradiation with wavelength of 2.54 × 10-⁷ metres is 1.18 × 10¹⁵ Hz.

How to calculate frequency?

The frequency of a radiation is the rate of occurrence of anything i.e. the relationship between incidence and time period.

The frequency of a wave can be calculated using the following formula;

λ = v/f

Where;

λ = wavelengthv = speed of lightf = frequency

According to this question, an irradiation with wavelength of 2.54 × 10-⁷ metres is given. The frequency can be calculated as follows;

2.54 × 10-⁷ metres × f = 3 × 10⁸ metres/seconds

f = 3 × 10⁸ ÷ 2.54 × 10-⁷

f = 1.18 × 10¹⁵ Hz

Therefore, the frequency of an irradiation with wavelength of 2.54 × 10-⁷ metres is 1.18 × 10¹⁵ Hz.

Learn more about frequency at: https://brainly.com/question/3639648

#SPJ1

During a UV-Visible spectroscopy experiment, a student notes a wavelength peak measurement at 280 nm. What region of the electromagnetic spectrum was this peak observed?

Answers

If during a spectroscopy experiment a student notes a wavelength peak measurement at 280 nm, then the region of the electromagnetic spectrum observed is the UV region.

What is the electromagnetic spectrum?

The electromagnetic spectrum refers to all types of wavelengths that radiation can emit as light, which involves both visible light and also ultraviolet (UV) radiation.

In conclusion, if during a spectroscopy experiment a student notes a wavelength peak measurement at 280 nm, the region of the electromagnetic spectrum observed is the UV region.

Learn more about the electromagnetic spectrum here:

https://brainly.com/question/23423065

#SPJ1

PLEASE HELP!!!


Compare and contrast a scientific theory and a scientific law, and include an example of each.

Answers

Answer:

scientific is a study of things and scientific law is law

Explanation:

you can study scientific a ND and law

hshdfhdh

Answer:

Scientific theories and laws are both factual. However, scientific theories are statements that have been proven over and over again by dozens of scientists. For example, a theory would be that the solar system is heliocentric (planets revolve around the sun). Theories are also subject to change in the event of new technological innovations. Scientific laws are statements that are universal and are based on logic/math. These will not change because they describe what happens and they are rules. For example, Newton's laws of motion would be laws because they are rules of motion. Overall, scientific theories and laws describe why and what happens based on certain conditions and circumstances.


How many years ago and where did scientists figure out how the Earth was made?

Answers

Answer:

Earth formed in this manner about 4.54 billion years ago (with an uncertainty of 1%) and was largely completed within 10–20 million years. The solar wind of the newly formed T Tauri star cleared out most of the material in the disk that had not already condensed into larger bodies

Explanation:

Earth formed in this manner about 4.54 billion years ago (with an uncertainty of 1%) and was largely completed within 10–20 million years. The solar wind of the newly formed T Tauri star cleared out most of the material in the disk that had not already condensed into larger bodies

Answer:

More than 70 meteorites that have fallen to Earth have had their ages calculated by radiometric dating. The oldest of these are between 4.4 billion and 4.5 billion years old. Fifty thousand years ago, a rock hurled down from space to form Meteor Crater in Arizona.Scientists now think the Earth's story began around 4.6 billion years ago in a disk-shaped cloud of dust and gas rotating around the early sun, made up of material left behind after the sun's formation.

Explanation:

Earth is estimated to be 4.54 billion years old, plus or minus about 50 million years. Scientists have scoured the Earth searching for the oldest rocks to radiometrically date. In northwestern Canada, they discovered rocks about 4.03 billion years old.By measuring the age of rocks on the moon, and meteorites found on Earth, scientists estimate the Earth consolidated by 4.54 billion years ago.Formation. When the solar system settled into its current layout about 4.5 billion years ago, Earth formed when gravity pulled swirling gas and dust in to become the third planet from the Sun. Like its fellow terrestrial planets, Earth has a central core, a rocky mantle, and a solid crust.

PLS MARK AS BRAINLIEST GAVE MORE INFO THAN THE 1ST ANSWER

What mass in grams of CH₃OH (MM = 32.04 g/mol) would need to be added to 380.1 g of water in order to lower the freezing point of water by 12.0 °C? (Kf for water is 1.86 °C/m)

Answers

Mass in grams of CH₃OH would need to be added to 380.1 g of water in order to lower the freezing point of water by 12.0 °C is 78.53 g .

The depression in freezing point is given as :

ΔT = i × K × m

given that :

molar mass of  CH₃OH = 32.04 g/mol

volume of water = 380.1 g = 0.3801 kg

change in freezing point = 12 °C

K = 1.86 °C/m

i = 1  (CH₃OH does not dissociate in water , so i =1 )

putting all the values :

m = 12 / 1 ×1.86

m =  6.45 m

now, molality =  moles of solute / solvent in kg

           6.45 moles/kg   =   moles / 0.3801 kg

        moles of solute = 2.451 moles

therefore,

mass = moles × molar mass

mass = 2.451 moles × 32.04 g/mol

         =  78.53 g  CH₃OH is needed

Thus , Mass in grams of CH₃OH would need to be added to 380.1 g of water in order to lower the freezing point of water by 12.0 °C is 78.53 g .

To learn more about freezing point here

https://brainly.com/question/13148657

#SPJ1

Jinal kept two glasses of the same size and material on a kitchen table. In one glass she poured 250 mL of hot milk and in the other glass 250 mL of cold milk. She measured the temperature of the milk in both the glasses every ten minutes for two hours. What is she trying to find out?

Answers

Explanation:

is there a difference in speed between cooling down and warming up ?

so, when will both reach room temperature ? relatively at the same rate (I assume the hot milk is further from room temperature than the cold milk) ? or maybe even absolutely at the same time ?

a cube of iron pyrite is 0.31 cm on each side and has a mass of 0.040g. what is the density of the sample?

Answers

The density of the iron pyrite cube is 1.343 g/cm³.

Given,

Side of iron pyrite cube = 0.31 cm

Mass of iron pyrite = 0.040 g

The volume of iron pyrite cube = s³ cm³

Or, volume = 0.029791 cm³

We have to find the density of the sample.

Density is defined as the mass per unit volume. Or, it is the ratio of mass to the volume of the substance.

Using the formula for density, we get,

Density = mass/volume

Or, density = 0.40/0.029791

Or, density = 1.343 g/cm³

Hence, the density of the iron pyrite cube is 1.343 g/cm³.

To learn more about density, visit: https://brainly.com/question/15164682

#SPJ9

A tortoise moves at a speed of 454 cm/min. How fast is the tortoise in mph?
Hint: there are 5280 feet in 1 mile
A) 0.17 mph
B) 0.34 mph
C) 17 mph
D) 0.0017 mph

Answers

Answer:

A

Explanation :
454 cm/min = 0.169261


Monosodium glutamate is used to enhance the flavor of foods, it has the following composition: 13.6% Na; 35.5% C; 4.8% H; 8.3% N and 37.8% O, by mass.
What is the empirical formula of monosodium glutamate?

R= NaC5H8NO4

Answers

Answer:

Assume you have 1g of your sample.

Then 13.6% of this sample is Na, that is 0.136g.

Since you are to find the empirical formula, you need to find the number of moles of Na in 0.136g. You can do that by dividing by the atomic mass of Na: n(Na)=0.136g / 23.0 g/mol = 0.00591 mol

Next, you repeat this for all the other elements.

The last step is to pick the smallest number of moles that you get and divide the others by it. That way you should arrive at whole number coefficients for the empirical formula. The element with the smallest number of moles gets 1 as its coefficient).

Mass, Density, and Volume- Word Problems
1. What volume in liters would be occupied by 0.22777kg of a material with a density of 0.00523kg/mL?
2. What is the density of a substance in mg/mL, if a sample with a volume of 1.91cm^3 has a mass of 0.00588kg?

Answers

Taking into account the definition of density, you have:

the volume will be 0.04355 L.the density of the substance is 3,078.534 mg/mL.

Definition of density

Density is defined as the property that matter has to compress into a given space. That is, density is a quantity that is defined as the amount of mass in a given volume of a substance.

The expression for calculating density is the ratio between the mass of a body and the volume it occupies:

density= mass÷ volume

Density is inversely proportional to volume: the smaller the volume occupied by a given mass, the higher the density.

Volume in this case

In this case, you know that:

Density= 0.00523 kg/mLMass= 0.22777 kg

Replacing in the definition of density:

0.00523 kg/mL= 0.22777 kg÷ volume

Solving:

0.00523 kg/mL× volume= 0.22777 kg

volume= 0.22777 kg÷ 0.00523 kg/mL

volume= 43.55 mL= 0.04355 L (being 1000 mL= 1 L)

Finally, the volume will be 0.04355 L.

Density of a substance

In this case, you know that:

Mass= 0.00588 kg= 5880 mg(being 1 kg= 1,000,000 mg)Volume= 1.91 cm³= 1.91 mL (being 1 cm³= 1 mL)

Replacing in the definition of density:

density= 5880 mg÷ 1.91 mL

Solving:

density= 3,078.534 mg/mL

Finally, the density of the substance is 3,078.534 mg/mL.

Summary

In summary, you have:

the volume will be 0.04355 L.the density of the substance is 3,078.534 mg/mL.

Learn more about density:

brainly.com/question/952755

brainly.com/question/1462554

#SPJ1

Perform the calculation and record the answer with the correct number of sig figs

Answers

Answer:

0.399

Explanation:

Sig Fig rules

Use the chemical reaction to answer the question.

NaHCO3+HC2H3O2→NaC2H3O2+H2O+CO2
A student mixes baking soda (NaHCO3) and acetic acid (HC2H3O2) to produce a chemical reaction shown. Which statement about the reaction is correct?
--------------------------------------------------------------------------------------------------------------------
A. The atoms of the reactants are regrouped during the reaction.
B. Atoms of Na are destroyed during the reaction.
C. There are more H atoms after the reaction.
D.Some atoms gain mass after the reaction.

Answers

Answer:

the awnster is A

Explanation:

Brainly

A piece of metal has a mass of 114g and a volume of 10.0 cm³. What is the density of the metal?

Answers

Answer:

14.4g/cm³

Explanation:

114/10=14.4g/cm³

13. Critical Question: In this simulation, you can see that oxygen can be a solid, liquid or a
gas. However, we only see oxygen as a gas on Earth. Why don't we ever see solid or
liquid oxygen on Earth?

Answers

Because oxygen is a gas that naturally occurs in the environment, you rarely encounter it as either solid or liquid.

Oxygen is a substance that, depending on its temperature and pressure, can exist as a solid, liquid, or gas. It exists as a gas, specifically a diatomic gas, in the atmosphere. Because oxygen is a gas that naturally occurs in the environment, you rarely encounter it as either solid or liquid. Since gas has too much energy to have volume or structure, it cannot be solid or liquid. Because the tank keeps the gas contained, you can't see oxygen in the air outdoors or in substances like water, which is why you see oxygen tanks (water).

Learn more about oxygen here-

https://brainly.com/question/13905823

#SPJ9

what do these two changes have in common?

Erosion caused by wind
beating an egg

Answers

The Erosion caused by wind and beating an egg both the changes are physical change.

What is erosion?

Erosion is defined as a geographical process in which earthen material will blow away and caused by a natural force such as wind or water.

There are mainly four types of erosion

Splash erosionSheet erosionRill erosionGully erosion

Physical change can be defined as a type of change where only the physical properties of the matter changes.

Thus, the Erosion caused by wind and beating an egg both the changes are physical change.

To learn more about erosion, refer to the link below:

https://brainly.com/question/1599677

#SPJ1

NEED HELP PLS HELP ME OUT!!​

Answers

1. Cells are organized in tissues. 2. Different organs or group of tissues working together to perform a particular job called organ system. 3. Groups organ systems that works together to complete a series of tasks are called organ systems

Which safety equipment is needed when working with materials that car
spatter?

Answers

Answer: Required personnel protection equipment (PPE) must be worn at all times

Explanation:

a stick of butter weighs 0.25lbs. what is the weight of the stick of butter in milligrams?

Answers

A stick of butter weighs 0.25lbs. The weight of the stick of butter in milligrams is 113398.1.

What are milligrams?

Milligrams are the measurement quantity that is used to measure a substance in very minute quantities. It is the SI unit of mass. It is equivalent to one thousand grams.

lb is the symbol of a pound. It is used to measure an object in American and British systems of measurement. It is a value of weight.

1 lb = 453592 milligrams

0.25 lbs = 113398.1 milligrams

Therefore, the weight of the stick of butter in milligrams is 113398.1.

To learn more about milligrams, refer to the link:

https://brainly.com/question/8161648

#SPJ1

Other Questions
Which of the following is equivalent to (6y + 4x) + 7x? 6y + 11x 6y + 28x 7x(6y + 4x) 24xy + 7y In the U.S. Supreme Court case of The Cherokee Nation vs Georgia (1831),the court ruled 1) The federal government violated the cherokees fourth amendment right2) the cherokee were not considered citizens and did not have the right to bring a case to the federal court3) public facilities may be separate as long as they are equal4) Georgias law disciplining the cherokee to be unconstitutional Please help and thank you. I'll give brainlist to the best answerDo you agree/disagree with the statement "food portion sizes in America follow the healthy diet guidelines"? PLEASE HELO ASAP The populations of Cities A and B are 3.7 x 105 and 2,115,000, respectively. The population of City Cis twice the population of City B. The population of City C is how many times the population of City A? This recipe makes 7 pancakes. Sanjay follows the recipe but wants to make 21 pancakes. How much of each ingredient does he need? Recipe: Makes 7 135 g flour 1 teaspoon (tsp) baking powder 2 tablespoons (tbsps) sugar 130 ml milk 1 egg What ponyboy is physical How would you best spend R1000 in a period of one month as a teenager Divide the polynomials.Your answer should be a polynomial. Write the definition of each word. 1. A boy is standing on top of a roof that is 4.5 m high. If he throws a 1.4 kg water balloon down with a velocity of 2m/s,what velocity will the water balloon strike the ground with? (ignore air resistance) HELP!!!! WILL MARK BRAINLIEST!!!!!! When was America discovered Help meee pleaseeee what is 7one-half 3three-fourths A supplier is an external stakeholder that? How many grams of nitrogen monoxide are present if 33.7 L of ammonia and 41.3 L of Oxygen are reacted at 296.3 K and 1.26 atm? What is the enthalpy change for the reaction? NH3(g) + O2(g) -> NO(g) + H2O(l) The gross weekly sales at a certain super market are a Gaussian random with mean $2200 and standard deviation $230. Assume that the sales from week to week are independent. A) Find the probability that the gross sales over the next two weeks exceed $5000. B) Find the probability that the gross weekly sales exceed $2000 in at least 2 of the next 3 weeks. An Ag journalism firm always orders 50 cases of paper from their office supply company. They incur an annual holding cost of $15 per case and have an ordering cost of $25 each time they place an order. If their annual demand is 480 cases, how much could they save annually by switching to their economic order quantity? a. $25 b. $40 c. $15 d. $80 Andy y yoYour answer: limpia el bao limpian la sala limpias el dormitorio limpiamos el refrigerador which one? PLEASE HELP!!!!Read and choose the option with the correct question to complete the dialogue. (2 points)Clara: Buenos das. El verano pasado estuve en Cuba.Ruth: ________Clara: Acamp en la tienda de campaa.Group of answer choicesDnde comiste?A quin viste?Qu hiciste?Cunto compraste?