your hand feels cold when you hold an ice cube because A. the ice radiates cold to your hand B. the ice conducts cold to your hand C. your hand cools down by convection. D.Your hand transfers thermal energy to the ice​

The most common form of color blindness is called red-green color blindness.

This type of color blindness is caused by a malfunction of the red and green cone systems in the eye, which are responsible for detecting different wavelengths of light. This malfunction causes individuals to have difficulty distinguishing between certain combinations of red and blue, as they appear to be the same color or shade to the affected person. The exact cause of this malfunction is still unknown, but is believed to be caused by genetic factors, environmental influences, or a combination of both.This color blindness affects up to 8% of men and 0.5% of women, and is caused by a mutation in the gene that codes for the red-sensitive cone cells in the eye.

learn more about wavelengths Refer:brainly.com/question/13533093

#SPJ1

complete question:in the most common form of color blindness, the ___ cone system malfunctions rendering ____ indistinguishable from certain combinations of blue and red

The mechanical energy of the bird is 26.4 J.

To determine the mechanical energy of the bird, we need to calculate its kinetic energy and potential energy.

Kinetic energy = 1/2 * mass * velocity^2

Potential energy = mass * gravity * height

Given:

Mass = 0.2 kg

Velocity = 12 m/s

Height = unknown

Gravity = 12 m/s^2

Kinetic energy = 1/2 * 0.2 * 12^2 = 14.4 J

To find the potential energy, we need to know the height. Let's assume it is 5 meters.

Potential energy = 0.2 * 12 * 5 = 12 J

Mechanical energy = kinetic energy + potential energy

Mechanical energy = 14.4 + 12 = 26.4 J

Therefore, the mechanical energy of the bird is 26.4 J.

A.

Gravitational potential energy = mass * gravity * height

GPE = 20 * 9.81 * 2 = 392.4 J

The work done to lift the object is equal to its gravitational potential energy, so the GPF (Gravitational Potential Force) is 392.4 N.

B.

Total mass of boxes = 60 * 6 = 360 kg

Gravitational potential energy = mass * gravity * height

GPE = 360 * 9.81 * 2 = 7069.2 J

The work done to lift the boxes is equal to their gravitational potential energy, so the GPF is 7069.2 N.

Therefore, the GPF for the 20 kg lift is 392.4 N and the GPF for the 60 boxes is 7069.2 N.

A.

Kinetic energy = 1/2 * mass * velocity^2

KE = 1/2 * 0.003 * 40^2 = 2.4 J

Therefore, the kinetic energy of the 3 g bullet travelling at 40 m/s is 2.4 J.

B.

We can calculate the average velocity of the car using the formula:

Average velocity = distance / time

Average velocity = 60 / 3 = 20 m/s

Kinetic energy = 1/2 * mass * velocity^2

KE = 1/2 * 1200 * 20^2 = 240,000 J

Therefore, the kinetic energy of the car is 240,000 J.

Learn more about mechanical energy below.

https://brainly.com/question/30403434

#SPJ1

Sabrina is probably taking the Big Five Personality Test.

The Beck Depression Inventory, Millon Clinical Multiaxial Inventory-III, Minnesota Multiphasic Personality Assessment, and Child Behavior Checklist are some of the frequently used objective personality tests.

Examples of objective personality assessments include the Big Five Personality Inventory, the Millon Clinical Multiaxial Inventory (MCMI), and the Minnesota Multiphasic Personality Inventory (MMPI).

The Minnesota Multi-Phasic Personality Inventory (MMPI), which rates people on personality, psychological, and emotional factors, is arguably the most popular of the objective personality tests.

To know more about the personality test visit:

https://brainly.com/question/27196170

#SPJ1

the correct answer is A. The force would be one-fourth the original force.

According to Coulomb's law, the force between two charged particles is directly proportional to the product of their charges and inversely proportional to the square of the distance between them.

The mathematical expression for Coulomb's law is:

F = k * q1 * q2 / [tex]r^2[/tex]

where F is the force, k is the Coulomb constant, q1 and q2 are the charges of the particles, and r is the distance between them.

In this case, the force is given as -0.5 N, which means that the charges must be of opposite signs. Let's assume that the charged sphere has a positive charge, so the test particle must have a negative charge. The distance between them is initially 1 meter.

Plugging in the given values into Coulomb's law, we get:

-0.5 N = k * q_sphere * q_particle / [tex](1 m)^2[/tex]

where q_sphere is the charge of the sphere and q_particle is the charge of the test particle.

If we double the distance between the particles to 2 meters, then the new force can be calculated using the same equation:

F' = k * q_sphere * q_particle / ([tex]2 m)^2[/tex]

To determine how the new force F' relates to the original force F, we can take the ratio of the two equations:

F' / F = (k * q_sphere * q_particle / [tex](2 m)^2\\[/tex]) / (k * q_sphere * q_particle / (1 [tex]m)^2[/tex])

= (1/4)

Learn more about Coulomb's here:

https://brainly.com/question/12498766

#SPJ1

Answer: A

Explanation: the correct answer is A, The force would be one-fourth the original force.

A standing wave is composed of two waves with the same frequency and amplitude traveling in opposite directions and interfering with each other.  Thus we have to waves here.

These waves are known as the incident wave and the reflected wave. When the incident wave and the reflected wave interfere constructively, they create points of maximum displacement known as antinodes.

When they interfere destructively, they create points of minimum displacement known as nodes. The pattern of antinodes and nodes remains fixed in space, giving rise to a standing wave.

Learn more about standing waves:https://brainly.com/question/1121886

#SPJ1

At the apex of the trajectory, the ball's velocity and acceleration are u (10i+15j) m/s and zero

The initial velocity of the ball is u (10i+15j) m/s.

Velocity at the top of the trajectory: Since the ball is thrown with an initial velocity, it will reach the top of its trajectory with the same velocity, since there is no air resistance. Therefore, the velocity of the ball at the top of the trajectory is u (10i+15j) m/s.

Acceleration: The acceleration of the ball at the top of the trajectory is zero, since the ball is not accelerating (there is no acceleration due to air resistance).

Therefore, the velocity and acceleration of the ball at the top of the trajectory are u (10i+15j) m/s and zero, respectively.

learn more about Acceleration Refer:brainly.com/question/30660316

#SPJ1

Answer:

false

Explanation:

Can animals be at the top of more than one food chain? There cannot be too many links in a single food chain because the animals at the end of the chain would not get enough food (and hence, energy) to stay alive.

False. Because metaethics is concerned with the nature of ethics and moral reasoning.

Metaethics is concerned with the nature of ethics and moral reasoning, while normative ethics is concerned with specific ethical principles and the best course of action in particular ethical issues.

Disagreement on metaethics does not necessarily mean that two people will disagree on the best outcome of a particular ethical issue such as abortion. It is possible for two people with different metaethical views to agree on the best course of action in a particular ethical issue, as long as they share similar normative ethical principles or have similar views on the relevant facts of the situation.

However, differences in metaethics may lead to differences in how one arrives at their normative ethical principles, which may in turn affect their view on the best outcome of a particular ethical issue.

More on can metaethics be found here: https://brainly.com/question/29751236

#SPJ1

Therefore, the frequency of the sound wave is 0.1667 Hz.

Since we can fit 20 cycles into a distance of 340 meters, the wavelength for 20 Hz is equal to 340 metres divided by 20, or 17 metres. The wavelength is described as the length of this pattern for one cycle.

The quantity of cycles per second is used to describe a wave's frequency. The sound wave in this instance goes through one rotation in 6 seconds.

So the frequency of the wave can be calculated as:

Frequency = 1 / Time period

where Time period is the time taken to complete one cycle.

Therefore, the frequency of the sound wave can be calculated as:

Frequency = 1 / 6 seconds = 0.1667 Hz

To know more about frequency visit:-

https://brainly.com/question/2140860

#SPJ9

Answer:

the volume of the material is 0.0145 m^3 and its density is 20690.3 kg/m^3.

Explanation:

To solve the problem, we can use Archimedes' principle, which states that the buoyant force acting on an object submerged in a fluid is equal to the weight of the fluid displaced by the object.

Let's first find the weight of the unknown material in air:

W_air = 300 N

Next, let's find the weight of the unknown material in alcohol:

W_alcohol = 200 N

We can find the buoyant force acting on the material by subtracting the weight in alcohol from the weight in air:

F_buoyant = W_air - W_alcohol = 300 N - 200 N = 100 N

According to Archimedes' principle, this buoyant force is equal to the weight of the alcohol displaced by the material:

F_buoyant = ρ_alcohol * V * g

where ρ_alcohol is the density of the alcohol, V is the volume of the material, and g is the acceleration due to gravity.

Substituting the values we know:

100 N = 700 kg/m^3 * V * 9.81 m/s^2

Solving for V:

V = 0.0145 m^3

Finally, we can find the density of the material by dividing its weight in air by its volume:

ρ_material = W_air / V = 300 N / 0.0145 m^3 = 20690.3 kg/m^3

Therefore, the volume of the material is 0.0145 m^3 and its density is 20690.3 kg/m^3.

We can infer that item A is not composed of the same material as object B since its specific heat capacity is higher than object B's. As the specific heat capacities differ, we cannot assume that they are the same.

The amount of heat needed to increase the warmth of one unit of mass of a substance by one degrees Celsius must be compared between two things in order to ascertain if they are made of the same material. The compounds are probably the same if the heat capacity capacities are the same. The following equation can be used to determine how much heat energy is needed to raise an object's temperature:

Q = mcΔT

Where Q is the heat received or released, m is the object's mass, c is the material's specific heat capacity, and T is the temperature change.

Let's figure out how much heat energy is needed to raise item A's temperature by one degree Celsius:

Q A = mcΔT

Q A equals 6 kg x 2,310 J/(kg°C) x 1°C.

Q A = 13,860 J/°C

Let's now determine how much heat energy is needed to raise item B's temperature by 1 degree Centigrade:

Q B = mcΔT

Q B is equal to 4.6 kg, 1,771 J/(kg°C), and 1°C.

Q B = 8,146.6 J/°C

To Know more about Mass Visit:

brainly.com/question/19694949

#SPJ1

The mass of the counterweight required to balance the 90-kg load is also 90 kg.

To balance the 90-kg load, the moment created by the counterweight s must equal the moment created by the load. The moment created by a force is equal to the force multiplied by the perpendicular distance from the force to the point of rotation. In this case, the point of rotation is the fulcrum and the perpendicular distance is the distance between the fulcrum and the force.

Let's assume that the distance between the fulcrum and the load is d, and the distance between the fulcrum and the counterweight is x. We can then write the equation:

mass of counterweight x distance to fulcrum = mass of load x distance to fulcrum

m_s x x = 90 kg x d

We are given that x = 450 mm (0.45 m). Solving for m_s, we get:

m_s = (90 kg x d) / x

We need to determine the value of d in order to calculate the mass of the counterweight. Since the system is in balance, we know that the sum of the moments created by the load and the counterweight must be zero. That is:

mass of load x distance to fulcrum = mass of counterweight x distance to fulcrum

90 kg x d = m_s x (x + d)

Substituting the expression we derived earlier for m_s, we get:

90 kg x d = [(90 kg x d) / x] x (x + d)

Simplifying this expression by cancelling out the factor of d on both sides, we get:

90 kg = (90 kg / x) x (x + d)

Multiplying both sides by x, we get:

90 kg x = 90 kg x (x + d)

Cancelling out the factor of 90 kg, we get:

x = x + d

Solving for d, we get:

d = x = 450 mm = 0.45 m

Now we can use the equation we derived earlier for m_s to calculate the mass of the counterweight:

m_s = (90 kg x 0.45 m) / 0.45 m = 90 kg.

Learn more about moment here:

https://brainly.com/question/16260427

#SPJ1

At time zero, the location is -0.1031m, and the speed is 0 m/s.

How fast can the block go at its most. When the spring reaches its equilibrium length, all of the stored energy in the spring is transferred to kinetic energy, and the block accelerates to its maximum speed. Since the item is at rest, Ki = 0. As there is no friction, Wnc = 0.

A = x(0.6763s) = -0.1031m

v(0.6763s) = -Aω sin(ω*0.6763s) = 0.5303 m/s

ω = sqrt(k/m) = sqrt(109 N/m / 2.13 kg) = 5.148 rad/s

Now we can use these values to find the position and velocity at t = 0:

A cos(ωt) = A cos(0) = A = -0.1031m

-v(0) = Aω sin(ωt) = -Aω sin(0) = 0

To know more about speed visit:-

https://brainly.com/question/28224010

#SPJ1

the launch speed of the projectile is approximately 12.3 km/s that rises vertically above the Earth to an altitude equal to 11 REarth before coming to rest momentarily

We can use the conservation of energy principle to solve this problem. At the highest point, the projectile has zero kinetic energy and a certain potential energy, given by:

PE = mgh

where m is the mass of the projectile, g is the acceleration due to gravity, and h is the altitude above the Earth's surface. The potential energy can also be expressed in terms of the gravitational potential energy per unit mass, which is given by:

U = GM/r

where M is the mass of the Earth, r is the distance from the center of the Earth to the projectile, and G is the gravitational constant. At the highest point, the projectile has a distance of 12 REarth from the center of the Earth (11 REarth above the surface plus the radius of the Earth).

Setting these two expressions for potential energy equal to each other, we have:

mgh = GMm/r

where we can cancel the mass m from both sides to obtain:

gh = GM/r

Solving for the speed v at the launch point, we have:

v = sqrt(2gh)

where we can substitute:

h = 11 REarth

r = 12 REarth

g = GM/(12 REarth)2

Substituting these values and using the fact that REarth = 6.37×106 m, we get:

v = sqrt(2×(11+1)REarth×GM/(12REarth)) = 12.3 km/s

where we used the fact that the total distance traveled by the projectile is 2 REarth, so the factor of (11+1) appears in the expression for h.

Learn more about projectile here:

https://brainly.com/question/11422992

#SPJ1

The distance the object falls is equal to the height of the building, which is 90 x 3.85 = 346.5 meters.

The acceleration due to gravity can be found using the equation:

d = 1/2 * g * t^2

where d is the distance the object falls, t is the time of fall, and g is the acceleration due to gravity.

Substituting the known values:

346.5 meters = 1/2 * g * (8.50 seconds)^2

Solving for g:

g = 2 * 346.5 meters / (8.50 seconds)^2

g = 9.74 m/s^2

So the acceleration due to gravity on the planet is 9.74 m/s^2.

The impact speed of the object can be found using the equation:

v = g * t

where v is the impact speed and t is the time of fall.

Substituting the known values:

v = 9.74 m/s^2 * 8.50 seconds

v = 82.8 m/s

So, the impact speed of the object is 82.8 m/s.

It is important for archers to follow proper safety protocols and always keep their bows and arrows pointed in a safe direction and not to nock an arrow until they are ready to shoot.

It is dangerous for an archer to walk around with an arrow nocked and bowstring pulled to tension because it creates a situation where the bow is essentially loaded and ready to fire. Any accidental bump or movement could cause the arrow to be released, potentially causing injury to the archer or anyone nearby. This can be especially dangerous if the bow is pointed towards people or valuable objects.

Learn more about safety protocols here:

https://brainly.com/question/11763983

#SPJ1

Answer: The answer would be 4.

Explanation:

Being stressed is not a good feeling. Since None of the other answers suit the description of "overstressed", it would be 4.

irritable

Explanation:

irrtable meaning Easily annoyed or easily made mad

(9) None of the options listed in the question are correct as a risk assessment approach to environmental hazards.

(10) House debt is not a direct effect of housing on health (option D)

A risk assessment approach to environmental hazards aims to take into account all of the following factors, including the health outcome, inherent danger, quantity of exposure, and route of exposure. Therefore, none of the options listed in the question are correct as all of them should be considered in a risk assessment approach to environmental hazards.

10. While housing affordability and financial stress related to housing can indirectly affect health, they are not a direct effect of housing itself on health.

The other options are direct effects of housing on health:

A. Proximity to services and facilities, such as healthcare, education, and transportation, can affect health outcomes.

B. Materials effects of housing, such as ventilation, insulation, and building materials, can directly affect indoor air quality and physical health.

C. Insecure housing, such as homelessness or living in overcrowded or unsafe conditions, can lead to physical and mental health problems.

Learn more about risk assessment here: https://brainly.com/question/29671743

#SPJ1

Therefore, the wavelength of the ocean wave is approximately 28.14 meters.

The equation f=v f = v, where  is the wavelength in metres and v is the wave speed in m/s, can be used to determine the frequency of a wave if the radius and speed of the wave are known. This also provides the wave's frequency in Hertz.

The wave speed calculation can be used to calculate the ocean wave's wavelength:

v = λf

where the wavelength is, the frequency is f, and v is the wave speed.

The wave frequency is given as 0.07 Hz and the wave speed is provided as 1.97 m/s. We can use the following conversion ratio to change 4 miles per hour to metres per second:

1 mile/hour = 0.44704 m/s

So, 4 miles/hour = 1.78816 m/s

Now we can substitute the values into the wave speed equation and solve for λ:

λ = v/f = 1.97 m/s / 0.07 Hz = 28.14 m

To know more about wavelength visit:-

https://brainly.com/question/13533093

#SPJ1

Light waves will be refracted, or bent, as they move from air to the denser medium of water.

When a beam of light enters a swimming pool, it will cause light waves to bend and refract when they pass from the less dense medium of air to the denser medium of water.

This is due to the different densities of the two mediums, which causes the light waves to bend as they move from one to the other. As a result, the light waves become distorted and spread out, causing a blurry and distorted image.

This phenomenon is known as refraction, and it happens when light passes through any medium that is denser than the one it is coming from. It's why we can see objects underwater, as the light waves get bent and refracted as they pass through the water. Refraction is an important part of many optical phenomena, such as lenses and prisms, which use it to bend and shape light.

Learn more about light here:

https://brainly.com/question/15033563

#SPJ1

Tycho Brahe was the scientist who came to the conclusion that the cosmos was "Earth Centered" after failing to notice any seasonal variations in the background star "stellar parallax."

An Earth-centered perspective of the cosmos. Claudius Ptolemy believed that the Earth was at the centre of the universe. Before the controversial findings of Copernicus, Galileo, and Newton, this belief persisted for 1400 years.

Around 380 B.C., a scientist by the name of Eudoxus developed the first geocentric universe model. The stars, the sun, and the moon are all incorporated into the sequence of cosmic spheres that make up Eudoxus' universe model.

To know more about stellar parallax visit:-

https://brainly.com/question/29352944

#SPJ1

a. The graph does not appear to be symmetrical.

b. The graph appears to be bimodal, as there are two distinct peaks.

c. The data appear to be positively skewed, as the tail of the graph extends further to the right than to the left.

d. There appear to be outliers for values less than 3.5 and greater than 6.75, as these values are relatively far away from the rest of the data and do not fit the overall pattern of the graph.

A graph is described as a structure amounting to a set of objects in which some pairs of the objects are in some sense "related.

Graphs are a popular tool for graphically illuminating data relationships.

In conclusion,  A graph serves the purpose of presenting data that are either too numerous or complex to be properly described in the text while taking up less room.

Learn more about graph at: https://brainly.com/question/19040584

#SPJ1

Since [1 + 2] = [1] + [2], the Velocity of the constant 1 and 2 must be the same. Therefore, both constants have the same SI units.

V is the velocity, d is the distance, and t is the duration in the equation V = d/t. Calculate the object's acceleration by dividing its mass by its force, then multiplying the result by the acceleration's duration.

(b) The units of the constants 1 and 2 must be the same because [12 / 12] = 1. As a result, the SI units for both variables are the same.

(c) The units of the constant 2 must be the same as the units of the constant 1 squared because [2] = [2] / [1]. As a result, the SI units for the constants 1 and 2 differ.

(d) The constant 2 must have radians as its units because the cosine function's input must be dimensionless. It is necessary for the constant 1 to have units that enable the cosine function's units to cancel out. This can be done by assigning the constant 1 units that are reciprocal radians, or radians to the power of -1. As a result, the SI units for the constants 1 and 2 are rad-1 and radians, respectively.

Due to the fact that [(2 / 1) - (2)2] equals [(2 / 1)], The units of the constant 2 must match those of the constant 1 cubed, or [22]. As a result, the SI units for the constants 1 and 2 differ.

To know more about Velocity visit:-

https://brainly.com/question/17127206

#SPJ1

The required escape velocity from the asteroid in km/s and mph is 2.0 km/s and 4478 mph, respectively.

According to analyses of orbital statistics, asteroids of 10 km in size can strike the planet every 100 My or so, which is consistent with the theory that we were struck by an object of this size 65 My ago.

Part A: Escape velocity is the bare minimum speed at which an object can break out of an astronomical body's gravitational influence. The following provides the escape velocity formula:

v = √((2GM)/r)

Where, G = gravitational constant M = mass of the astronomical body r = radius of the astronomical body

Now, let's substitute the given values to find the escape velocity from the asteroid.

Given, Diameter of the asteroid, d = 10 km

So, radius of the asteroid, r = d/2 = 5 km = 5 × 10³ m

Density of the asteroid, ρ = 3000 kg/m³

Mass of the asteroid, M = ρ × volume of the asteroid= ρ × (4/3)πr³= 3000 × (4/3) × π × (5 × 10³)³= 6.54 × 10¹¹ kg

Gravitational constant, G = 6.67 × 10⁻¹¹ Nm²/kg²

Putting all these values in the escape velocity formula, v = √((2GM)/r)= √((2 × 6.67 × 10⁻¹¹ × 6.54 × 10¹¹)/5 × 10³)= 2.0 km/s

Therefore, the escape velocity from the asteroid is 2.0 km/s.

Part B : Now, let's convert the escape velocity from km/s to mph.1 km = 0.621371192 milesSo, v in mph = 2.0 km/s × (0.621371192 miles/km) × (3600 s/hour)= 4478 mph

Therefore, the escape velocity from the asteroid is 4478 mph (rounded to three significant figures).

Hence, the required escape velocity from the asteroid in km/s and mph is 2.0 km/s and 4478 mph, respectively.

To know more about escape velocity visit:-

https://brainly.com/question/31149165

#SPJ1

Question:

You are standing on the surface of a spherical asteroid 10 km in diameter, of density 3000 kg/m3.

Part A

Calculate the escape velocity from the asteroid in km/s.

Express your answer in kilometers per second using two significant figures.

Calculate the escape velocity from the asteroid in mph.

Express your answer in miles per hour using three significant figures

a) The x-component of momentum is given by pₓ = m * vₓ, where m is the mass of the box and vₓ is the x-component of velocity. Since the force is only acting in the x-direction, there is no net force in the y-direction, and the y-component of momentum is conserved.

Therefore, we can use the initial y-component of momentum to find the y-component of momentum at any time.

At t = 2.00 s, the x-velocity can be found by integrating the x-component of the force:

Fₓ = (0.290 N/s)t

vₓ = ∫Fₓ dt = (0.145 N/s)t² + C

Using the initial condition that vₓ(0) = pₓ(0)/m = (-3.10 kg⋅m/s) / (m), we can solve for C:

C = -3.10 m/s

Therefore, vₓ = (0.145 N/s)t² - 3.10 m/s

And the x-component of momentum at t = 2.00 s is:

pₓ = m * vₓ = m * [(0.145 N/s) (2.00 s)² - 3.10 m/s]

pₓ = (550 kg) * [-1.54 m/s] ≈ -847 kg⋅m/s

b) As mentioned above, the y-component of momentum is conserved since there is no net force in the y-direction. Therefore, the y-component of momentum at t = 2.00 s is the same as the initial y-component of momentum, which is:

pᵧ = m * vᵧ = m * [(4.10 kg⋅m/s) / (m)] = 4.10 kg⋅m/s

Learn more about momentum here:

https://brainly.com/question/30677308

#SPJ1

Answer:

Explanation:

The vertex of an absolute function is the minimum or the maximum point of the graph

The graph that could be  is (a) an absolute value graph has a vertex at (2, 1)

The function is given as:

And the coordinates of the vertex (h,k) are said to be positive.

From the list of given options, only the first option has both coordinates of the vertex to be positive i.e. (2,1)

Hence, the graph that could be  is (a)

Read more about absolute value functions at:

brainly.com/question/2166748

"Plum pudding" or "raisin bread" model of the atom

Bohr's planetary model of the atom

The quantum or cloud model of the atom

What is Plum Pudding Model?

The "Plum pudding" or "raisin bread" model of the atom is a model where electrons are distributed throughout the atom and the positive charge is spread out to create a sort of "pudding" with "raisins" of negative charge. This model was proposed by J.J. Thomson in the early 1900s and is now considered inaccurate because it does not include the nucleus.

Bohr's planetary model of the atom is a model where electrons orbit the nucleus in specific energy levels or "shells". This model was proposed by Niels Bohr in 1913 and was an improvement over the "Plum pudding" model. It is useful and used often in introductory chemistry, but it has limitations in accurately describing more complex atoms.

Learn more about Plum Pudding Model from the given link

https://brainly.com/question/4839193

#SPJ1