Answer: Yes we can extract all the lithium from the amount of compound we have.
Explanation:
To calculate the moles :
[tex]moles=\frac{\text {given mass}}{\text {Molar mass}}[/tex]
[tex]\text{Moles of} Li=\frac{150g}{7g/mol}=21.4moles[/tex]
[tex]\text{Moles of} Li_2O=\frac{675g}{30g/mol}=22.5moles[/tex]
[tex]2Li_2O\rightarrow 4Li+O_2[/tex]
According to stoichiometry :
2 moles of [tex]Li_2O[/tex] produce 4 moles of [tex]Li[/tex]
Thus 22.5 moles of [tex]Li_2O[/tex] will produce=[tex]\frac{4}{2}\times 22.5=45moles[/tex] of Li
As 21.4 moles is a lesser quantity than 45 moles, thus it can be produced
Yes, you can extract all the lithium you need from the compound
We'll begin by calculating the mass of lithium, Li in 1 mole of Li₂O. This can be obtained as described below:
1 mole of Li₂O = (2×7) + 16
1 mole of Li₂O = 14 + 16 = 30 g
SUMMARY
30 g of Li₂O contains 14 g of Li.
With the above information in mind, we can determine the mass of Li in 675 g of lithium oxide, Li₂O. This can be obtained as follow:30 g of Li₂O contains 14 g of Li.
Therefore,
675 g of Li₂O Will contain = (675 × 14)/30 = 315 g of Li.
From the calculation made above, we can see that there are 315 g of Li in 675 g of Li₂O. Thus, we can conclude that 150 g of Li can be extracted from the compound (i.e 675 g of Li₂O)Learn more: https://brainly.com/question/15381525
Which of the following describes redox in displacement plating?
A) The Metal A ion is oxidized and Metal B is reduced.
B) The Metal A ion is reduced and Metal B is oxidized.
C) Displacement plating does not involve a change in oxidation states.
Answer:
B) The Metal A ion is reduced and Metal B is oxidized.
Explanation:
When we think of electroplating, we often think of a set up in which there is a nonsponteanous reaction driven by the presence of a cell.
However, in displacement plating, a cell is not involved. Metals are chosen based on their respective position in the electrochemical series.
For instance, silver can be coated on copper by immersing the copper rod into a silver ion solution. The copper rod becomes oxidized. The silver ions accept electrons and become deposited on the copper rod.
What category of elements is characterized by the filling of d orbitals?
Halogens
Alkali Metals
Transition Metals
Alkaline Earth Metals
Explanation:
Transition Metals are characterized by the filling of d orbitals?
Kai was 200 meters north of the library when he remembered he had to return some books to the library. It took him 200 seconds to do the round trip. Which best describes Kai's roundtrip?
Answer:
His speed was 2 m/s, and his velocity was 0
Explanation:
In physics, speed of an object is defined as the change in position with the change in its time. While velocity may be defined as the change in the position of the body with respect to the time taken.
Speed in a scalar quantity which means it has only magnitude while velocity has both magnitude and direction.
To determine change in velocity both direction as well as magnitude has to be changed.
In the context, Kai was 200 m of the library in the north direction. Now for the round trip to the library and back to his position, Kai took 200 seconds time to cover the distance.
So for the round trip, the speed of Kai would be 2 m/s abut the velocity of Kai is 0 as the displacement of Kai is 0.
Answer:
speed 2 m/s, his velocity 0
: B
Which of the following statements best explains the type of chemical reaction represented by Jane's picture?
Answer:
There are no statements. Edit your question and state the statements.
Answer:
There should be a image
According to the periodic table, which statement
correctly describes the change from a neutral atom
of an element to its ion?
A. A fluorine atom forms a F-' ion by losing
one electron.
B. A sodium atom forms a Nation by losing
two electrons.
C. A magnesium atom forms a Mg+2 ion by
gaining two electrons.
D. A phosphorus atom forms a p- ion by
gaining three electrons
How many electrons are gained in the half-reaction O2 + electrons — 202?
O
A. 2
O
B. 4
o
C. O
o
D. 1
SUBMIT
Answer: B. 4
Explanation:I just took it
Air does not have a chemical symbol or formula. Why?
1)It contains different amounts of water depending on where you are.
2)Air is not a pure substance.
3)It depends on the temperature.
4)It depends on how far above sea level you are.
Answer:
2. Air is not a pure substance
Explanation:
Air does not have a chemical symbol or formula because air is not a pure substance (option 2).
What is air?Air is a mixture of different gases. A mixture is a substance that constitutes other compounds that are not chemically bonded together.
This means that air as a mixture is made up of different gaseous components that possess their own individual identity.
Atmospheric air is composed of the following different constituents;
78% nitrogen21% oxygenSmall amounts other gases including carbon dioxide, neon, and hydrogen etc.This shows that air is not a pure substance and accounts for the reason why air does not have a definite chemical formula or symbol.
Therefore, option 2 is correct.
Learn more about air at: https://brainly.com/question/30394852
#SPJ2
How many grams of lithium are in 1.25 x 10^26 atoms of Li?
Mass of Lithium = 1443.73 g ≈ 1.4 kg
Further explanationThe mole is the number of particles(molecules, atoms, ions) contained in a substance
1 mol = 6.02.10²³ particles
Can be formulated
N=n x No
N = number of particles
n = mol
No = Avogadro's = 6.02.10²³
The number of atoms of Li = N=1.25 x 10²⁶
mol Li(n) :
[tex]\tt n=\dfrac{N}{No}\\\\n=\dfrac{1.25\times 10^{26}}{6.02\times 10^{23}}\\\\n=2.08\times 10^2[/tex]
mass Li (Ar=6.941 g/mol)
[tex]\tt mass=mol\times Ar\\\\mass=208\times 6,941\\\\mass=1443.73~g[/tex]
How many grams of Cu would be needed to react with 2.0 mol of HNO3?
3 Cu(s) + 8 HNO3(aq) --> 3 Cu(NO3)2(aq) + 2 NO(g) + 4 H20(1)
Answer: B
Explanation: I just took the quiz :)
Taking into account the reaction stoichiometry, 47.655 grams of Cu is required to react with 2 moles of HNO₃.
Reaction stoichiometryIn first place, the balanced reaction is:
3 Cu + 8 HNO₃ → 3 Cu(NO₃)₂ + 2 NO + 4 H₂O
By reaction stoichiometry (that is, the relationship between the amount of reagents and products in a chemical reaction), the following amounts of moles of each compound participate in the reaction:
Cu: 3 moles HNO₃: 8 moles Cu(NO₃)₂: 3 moles NO: 2 molesH₂O: 4 molesThe molar mass of the compounds is:
Cu: 63.54 g/moleHNO₃: 63 g/moleCu(NO₃)₂: 187.54 g/moleNO: 30 g/moleH₂O: 18 g/moleThen, by reaction stoichiometry, the following mass quantities of each compound participate in the reaction:
Cu: 3 moles ×63.54 g/mole= 190.62 gramsHNO₃: 8 moles ×63 g/mole= 504 gramsCu(NO₃)₂: 3 moles ×187.54 g/mole= 562.62 gramsNO: 2 moles ×30 g/mole= 60 gramsH₂O: 4 moles ×18 g/mole= 72 gramsMass of Cu requiredThe following rule of three can be applied: If by reaction stoichiometry 8 moles of HNO₃ react with 190.62 grams of Cu, 2 moles of HNO₃ react with how much mass of Cu?
[tex]mass of Cu=\frac{2 moles of HNO_{3} x190.62 grams of Cu}{8 moles of HNO_{3} }[/tex]
mass of Cu= 47.655 grams
Finally, 47.655 grams of Cu is required to react with 2 moles of HNO₃.
Learn more about the reaction stoichiometry:
brainly.com/question/24741074
brainly.com/question/24653699
If the pH is decreased from 7 to 6, it means that the
1..concentration of Hydrogen ions is 10 less
2...concentration of Hydrogen ions is 10 more
3.it is the same
Answer:2...concentration of Hydrogen ions is 10 times more
Explanation:
PLEASE HELP i really need help please
Explanation:
convergent-plate slides beneath the other
divergent-plates move away from each other
transform-2 plates slide past each other
What is the best method of eye protection in laboratory?
Answer:
goggles
Explanation:
...................
What type of solution is formed when solid sodium hydroxide (NaOH) is dissolved in water?
A) an electrolytic solution, because NaOH will dissociate into ions
B. an electrolytic solution, because NaOH will not dissociate into ions
C) a nonelectrolytic solution, because NaOH will not dissociate into ions
D) a nonelectrolytic solution, because NaOH will dissociate into ions
The statement " an electrolytic solution, because NaOH will dissociate into ions" is correct.
What is electrolytic solution?A solution that contains ions, atoms, or molecules that already have gained or lost electrons and also is electrically conductive is known as an electrolyte solution. They're known as ionic solutions because of this.
NaOH can be considered as electrolyte because sodium hydroxide was soluble in water, it will entirely dissociate into its ions. As a result, it can classify NaOH as a strong electrolyte. When electrolytes are dissolved in water, they form a solution that conducts electricity.
The reaction can be written as:
NaOH (s) + [tex]H_{2}O[/tex] → [tex]Na^{+} +OH^{-} +H_{2}O[/tex]
To know more about electrolytic solution.
https://brainly.com/question/9203208.
#SPJ2
At 3 atm of pressure, a cylinder with a movable piston contains 2000 ml of gas. If the pressure
is increased to 8 atm and the temperature remains unchanged, what is the new volume of the
gas?
Answer:
V₂ = 750 mL
Explanation:
Given data:
Initial pressure = 3 atm
Initial volume = 2000 mL
Final pressure = 8 atm
Final volume = ?
Solution:
The given problem will be solved through the Boyle's law,
"The volume of given amount of gas is inversely proportional to its pressure by keeping the temperature and number of moles constant"
Mathematical expression:
P₁V₁ = P₂V₂
P₁ = Initial pressure
V₁ = initial volume
P₂ = final pressure
V₂ = final volume
Now we will put the values in formula,
P₁V₁ = P₂V₂
3 atm × 2000 mL = 8 atm × V₂
V₂ =6000 atm. mL / 8atm
V₂ = 750 mL
Convert 1.60 x 107 cm to mm in scientific notation
please help
Answer:
4.8x10^9
Explanation:
Which phrase describes a polymer? A. a branching structure containing 10 carbon atoms and 22 hydrogen atoms B. a crystal containing many sodium ions and many fluoride ions C. a long chain of carbon atoms with hydrogen atoms attached to them D. a molecule containing six carbon atoms arranged in a ring structure E. a single atom of calcium bonded to two atoms of chlorine
Answer:
C. A long chain of carbon atoms with hydrogen atoms attached to them
Explanation:
For example, the main component of flour is starch and starch is a polymer.
Now, Starch is a polymeric carbohydrate that consists of a large number of glucose units which are bonded by chemical bonds known as glycosidic bond. It's also known that Starch is a white, tasteless and odorless powder that is not soluble in alcohol or even cold water.
Thus, we can say that polymer is a long chain of carbon atoms with hydrogen atoms attached to them.
Option C is correct.
Answer:
C. A long chain of carbon atoms with hydrogen atoms attached to them
Explanation:
For example, the main component of flour is starch and starch is a polymer.
Now, Starch is a polymeric carbohydrate that consists of a large number of glucose units which are bonded by chemical bonds known as glycosidic bond. It's also known that Starch is a white, tasteless and odorless powder that is not soluble in alcohol or even cold water.
Thus, we can say that polymer is a long chain of carbon atoms with hydrogen atoms attached to them.
Write the names of the following covalent compounds: SiO2
Answer:
Silicon dioxide
Explanation:
Silicon dioxide, also known as silica, is an oxide of silicon with the chemical formula SiO₂, most commonly found in nature as quartz and in various living organisms. In many parts of the world, silica is the major constituent of sand.
The name of the following covalent compound: SiO₂ is silicon oxide.
What is the name of the covalent compound?The name of the covalent compound is silicon oxide. Note that covalent compounds are known for their ability to share electrons. This is the case with the compound, silicon oxide that shares electrons with oxygen.
In the compound, there are two atoms of oxygen and one atom of silicon.. So, the name of the compound is silicon oxide.
Learn more about covalent compounds here:
https://brainly.com/question/3447218
#SPJ6
need help ASAP , anybody
- 20 points
Answer:
i think it is b im not sure
Explanation:
The tire pressure in a automobile tire was 2.38 atm when the tire was at 26°C. As the automobile drove for several hours, the temperature of the tire increased to 93°C.
35 atm
41.0 atm
2.91 atm
3.09 atm
33 atm
Answer:
The answer is 2.91 atm
Explanation:
Can someone help me out with this thanks!
Answer:
a) Hydrogen and Fluorine
b) Lithium and Oxygen
c) Potassium and Phosphorus
d) Nickel and Oxygen
e) Mercury and Chlorine
Explanation:
The capital letters in the compounds represent a single element, while some elements have one capital letter and one small letter after it.
a) H & F
b) Li & O
c) K & P
d) Ni & O
e) Hg & Cl
Explain why the noble gases are unusually stable.
Answer:
Noble gases are the least reactive of all elements. That's because they have eight valence electrons, which fill their outer energy level. This is the most stable arrangement of electrons, so noble gases rarely react with other elements and form compounds.
Explanation:
A galaxy is 650 million light years away. Based on Hubble's Law, how quickly is
that galaxy moving away from us?
a.29.5km
b..33km
c.572km
d.14300km
16 grams of propane, C 3 H 8 and 20 grams of oxygen, O 2 are reacted to produce carbon dioxide and water. Calculate the volume of CO 2 produced?
Answer:
The volume of CO₂ produced is 8.4 L
Explanation:
The mass of propane in the reaction C₃H₈ = 20 grams
The mass of, oxygen, O₂ in the reaction = 20 grams
The produce of the reaction are carbon dioxide, CO₂ and water, H₂O
The balanced equation of the (combustion) reaction can be presented as follows;
C₃H₈ (g) + 5O₂ (g) → 3CO₂ (g) + 4H₂O (g)
Therefore, one mole of propane, C₃H₈, reacts with five moles of oxygen, O₂, to produce three moles of carbon dioxide, CO₂, and four moles of water molecules, H₂O, as steam
The number of moles = Mass/(Molar mass)
The molar mass of propane, C₃H₈ = 44.1 g/mol
The number of moles of propane in 16 grams of propane = 16/44.1 ≈ 0.3628 moles
The molar mass of oxygen, O₂ = 32.0 g/mol
The number of moles of oxygen in 20 grams of propane = 20/32 ≈ 0.625 moles
Therefore;
Given that 1 mole of C₃H₈ reacts with 5 moles of O₂
1 mole of O₂ will react with 1/5 moles of C₃H₈
0.625 moles of O₂ will react with 0.625/5 = 0.125 moles of C₃H₈ to produce 3 × 0.125 = 0.375 moles of CO₂
1 mole of an ideal gas occupies 22.4 L at standard temperature and pressure
Taking CO₂ as an ideal gas, we have;
0.375 mole of CO₂ will occupy 0.375 × 22.4 L = 8.4 L
Therefore, the volume of CO₂ produced = The volume occupied by the 0.375 moles of CO₂ = 8.4 L.
Explain why non-metals tend to be poor conductors using the term electronegativity.
Explanation:
Components that throughout chemical processes appear to acquire electrons to achieve anions are considered non-metals. These were all elements which are electronegative. Those who are – anti conductors of electricity and heat, fragile and disadvantaged.
HOW MANY LITERS ARE IN 7110.5 mL? WHAT IS THE UNIT?
ASAP pleaseee and Thankyou
Answer:
i think 50%
Explanation:
HELP NEEDED ASAP
What mass of Al is produced when 0.500 mole of Al2 S3 is completely reduced with excess H2? (At. Masses of Al=27, S=32, H=1)
Select one:
a. 13.5 g
b. 27.0 g
c. 2.7 g
d. 54.0 g
Which element has the smallest atomic radius?
A-Na
B-H
C-Li
D-K
Answer:
B Hydrogen
Explanation: Hydrogen is the smallest element.
Which of the following organ is NOT part of the Urinary system?
A. Kidney
B. Bladder
C. Brain
D. Urethra
Answer:
Explanation:C
What effect does an increase in products have on the reaction rate of a mixture at equilibrium?
Rate of reaction will decrease if there is an increase in product concentration.
If one (or more) of the reactants or products concentrations are raised, the equilibrium will change to lower the concentration. Alternately, if the temperature is lowered, the equilibrium will change to favor the exothermic process, which will raise the temperature.
The rate of the reaction will frequently rise as one or more of the reactants are concentrated more. This happens as a result of the fact that a reactant collides more frequently over time at increasing concentrations.An increase in a products concentration will result in a decrease in the total quantity of products and an increase in the total number of reactants. That is the reaction will move backwards.Hence, there is decrease in rate of reaction as the product concentration increases.
To learn more about Rate of reaction refer- https://brainly.com/question/24795637
#SPJ9