To differentiate between AgCl(s) and PbCl₂(s), we can use a reagent that reacts differently with each compound. One such reagent is a solution of ammonia (NH₃).
When ammonia is added to AgCl(s), it will dissolve the solid and form a colorless, soluble complex ion, [Ag(NH₃)2]+. This is because AgCl is soluble in ammonia due to the formation of the complex ion.
AgCl(s) + 2NH₂(aq) → [Ag(NH₃)2]+(aq) + Cl^-(aq)
On the other hand, when ammonia is added to PbCl₂(s), it will not dissolve the solid, and there will be no observable reaction. This is because PbCl₂ is not soluble in ammonia, and the complex ion does not form.
PbCl₂(s) + 2NH₃(aq) → No observable reaction
Therefore, the addition of ammonia to the test tube containing the white solid will help differentiate between AgCl and PbCl₂.
If the solid is AgCl, it will dissolve in the ammonia solution and form a colorless complex ion, while if the solid is PbCl₂, there will be no observable reaction.
to know more about reagents refer here:
https://brainly.com/question/31228572#
#SPJ11
In a boiling pot of water are a metal spoon and a wooden spoon of equal masses/size. Which spoon would likely be more painful (higher in temperature) to grab? Assume that both spoons have been in the same pot of boiling water for the same amount of time. Explain this phenomena using the following terms: Heat, Mass, Temperature, Specific Heat Capacity, Heat Flow. Consider all possible factors in your explanation
The metal spoon is hotter than the wooden spoon due to its higher mass,
Heat is the energy transferred from one body to another due to a temperature difference. The amount of heat transferred is proportional to the mass of the object and its specific heat capacity. Specific heat capacity is the amount of heat required to raise the temperature of one unit mass of the substance by one degree Celsius.
In this scenario, the two spoons are of equal size, but the metal spoon has a higher mass and specific heat capacity compared to the wooden spoon. When both spoons are placed in the boiling water, heat flows from the water to the spoons until they reach the same temperature as the water.
However, due to the higher mass and specific heat capacity of the metal spoon, it requires more heat energy to raise its temperature compared to the wooden spoon. As a result, the metal spoon takes a longer time to reach the same temperature as the wooden spoon.
Additionally, metals are better conductors of heat compared to wood. Therefore, the metal spoon conducts the heat more efficiently from the boiling water to the handle, making it hotter than the wooden spoon.
Overall, the metal spoon is hotter than the wooden spoon due to its higher mass, higher specific heat capacity, and better heat conduction properties. This is why it would be more painful to grab.
the total volume of hydrogen gas needed to fill the hindenburg was l at atm and . given that for is , how much heat was evolved when the hindenburg exploded, assuming all of the hydrogen reacted to form water?
2.4453 × 10⁹ KJ energy was evolved when the total volume of hydrogen gas needed to fill the hindenburg was 2.09 × 10⁸ l at 1.00 atm and 25.1°
According to the given data,
Volume of the hydrogen gas = 2.09 × 10⁸ L
Pressure of the gas = P = 1 atm
Temperature of the gas =T = 25.1 °C =298.1 K
We know that, for an ideal gas equation
PV=nRT
1 atm ×2.09 × 10⁸ L = n × 0.0820 atmL/molK × 298.1 K
⇒n = 1 atm ×2.09 × 10⁸ L/ 0.0820 atmL/molK × 298.1 K
⇒n = 0.0855 ×10⁸ mol
ΔH for hydrogen gas is =-286 kJ/mol
For 0.0855 ×10⁸ mol energy evolved when hydrogen gas is burned =
0.0855 ×10⁸ mol × (-286 KJ/mol) = -2.4453 × 10⁹ KJ
Therefore, 2.4453 × 10⁹ KJ energy was evolved when it was burned.
To know more about energy evolved here
https://brainly.com/question/13196730
#SPJ4
The complete question is-
The total volume of hydrogen gas needed to fill the hindenburg was 2.09 × 108 l at 1.00 atm and 25.1°. how much energy was evolved when it burned?
How many electron domains does CO have?
CO is made up of carbon (C) and oxygen (O) that are covalently bound and share electrons to create a molecule. To determine a molecule's electron domain shape, we count the number of electron domains surrounding the core atom.
An electron domain can be a bond pair or a single electron pair.
The central atom in CO is carbon, which is double-bonded to oxygen. As a result, the carbon atom has two electron domains: one from the double bond with oxygen and one from the two lone pairs of electrons on oxygen.
As a result, CO contains two electron domains surrounding the center carbon atom.
CO, as a result of the double bond with oxygen and two lone pairs of electrons on oxygen, has two electron domains surrounding its center carbon atom.
learn more about the electron domain here
https://brainly.com/question/30912314
#SPJ1
The first law the of thermodynamic also known as the "Law of Conservation of Mass" states that
A. heat changes occur during chemical and physical changes.
B. there are two types of energy, kinetic and potential
C. In any chemical or physical change, energy cannot be created or destroyed, only transformed in form.
D. energy is the capacity to do work or to supply heat
In any chemical or physical change, energy cannot be created or destroyed, only transformed in form.
option C.
What is the first law of thermodynamics?The first law of thermodynamics is known as the law of Conservation of Energy.
This law states that energy can neither be created nor destroyed but can be converted from one form to another.
So the first law of thermodynamics is not known as the "Law of Conservation of Mass", but rather as the "Law of Conservation of Energy".
The statement that best corresponds to the first law of thermodynamics is option C: "In any chemical or physical change, energy cannot be created or destroyed, only transformed in form."
Learn more about first law of thermodynamics here: https://brainly.com/question/26035962
#SPJ1
How many grams of no2 can be produced when 25.0 g of oxygen reacts?
71.875 grams of NO2 can be produced when 25.0 g of oxygen reacts in this reaction.
When 25.0 grams of oxygen reacts, the amount of NO2 produced can be determined by using stoichiometry. The balanced chemical equation for the reaction is:
2 NO + O2 → 2 NO2
From the equation, it can be seen that for every one mole of O2, two moles of NO2 are produced. Therefore, the first step is to convert the given mass of oxygen into moles. The molar mass of oxygen is 32 g/mol, so:
25.0 g O2 ÷ 32 g/mol = 0.78125 mol O2
Since the stoichiometry of the reaction shows that two moles of NO2 are produced for every one mole of O2, the next step is to calculate the number of moles of NO2 produced:
0.78125 mol O2 × 2 mol NO2/1 mol O2 = 1.5625 mol NO2
Finally, the mass of NO2 can be calculated by multiplying the number of moles of NO2 by its molar mass, which is 46 g/mol:
1.5625 mol NO2 × 46 g/mol = 71.875 g NO2
Therefore, 71.875 grams of NO2 can be produced when 25.0 g of oxygen reacts in this reaction.
To know more about oxygen, visit:
https://brainly.com/question/13370320#
#SPJ11
A decomposition of hydrogen peroxide into water and oxygen gas is an exothermic reaction. If the temperature is initially 28˚ C, what would you expect to see happen to the final temperature? Explain what is happening in terms of energy of the system and the surroundings.
If the decomposition of hydrogen peroxide into water and oxygen gas is an exothermic reaction, we would expect the final temperature to be lower than the initial temperature of 28˚C.
This is due to the fact that energy is released from the system during an exothermic reaction in the form of heat into the surroundings. In other words, the energy of the reactants is more than that of the products, and the excess energy is released into the environment.
As a result, the environment's temperature will rise, while the system's temperature will fall. This indicates that the reaction's final temperature will be lower than its 28° C starting point.
To learn more about an exothermic reaction, follow the link:
https://brainly.com/question/10373907
#SPJ1
The temperature of CI 2 is changed from 836. 06 K to 625. 29 K. If its new volume is 14. 509 L, what was its original volume in liters?
The original volume of CI₂ was 19.33 L.
According to Charles' Law, the volume of a gas is directly proportional to its temperature at constant pressure. This can be expressed as V₁/T₁ = V₂/T₂, where V₁ and T₁ are the initial volume and temperature, and V₂ and T₂ are the final volume and temperature.
In this problem, we are given the initial temperature (T₁ = 836.06 K), final temperature (T₂ = 625.29 K), and final volume (V₂ = 14.509 L). We are asked to find the initial volume (V₁). To do this, we can rearrange the Charles' Law equation to solve for V₁:
V₁ = (V₂/T₂) x T₁
Plugging in the values, we get:
V₁ = (14.509 L/625.29 K) x 836.06 K
V₁ = 19.35 L
As a result, the initial volume of CI₂ was 19.33 L.
To know more about the Temperature, here
https://brainly.com/question/30584358
#SPJ4
How many liters would a 20 liter sample of gas at STP occupy if the
pressure was changed to 20 atmospheres and the temperature was changed to
38°C?
A 20-liter sample of gas at STP would occupy 5.68 liters if the pressure was changed to 20 atm and the temperature was changed to 38°C.
To solve this problem, we can use combined gas law, which relates the pressure, volume, and temperature of a gas. The formula for the combined gas law is:
[tex](P_1 * V_1) / (T_1 * n_1) = (P_2 * V_2) / (T_2 * n_2)[/tex]
where P1 and P2 are the initial and final pressures of the gas [tex]V_1[/tex] and [tex]V_2[/tex] are the initial and final volumes of the gas.
At STP, the conditions are 1 atmosphere of pressure and 0°C (273 K) of temperature.
Therefore, we can use these values as our initial conditions [tex](P_1 = 1\ atm, T_1 = 273 K)[/tex] and solve for [tex]V_2[/tex], the final volume of the gas:
[tex](P_1 * V_1) / T_1 = (P_2 * V_2) / T_2\\V_2 = (P_1 * V_1 * T_2) / (P_2 * T_1)[/tex]
Substituting the given values, we get:
[tex]V_2 = (1 atm * 20 L * 311 K) / (20 atm * 273 K) \\V_2 = 5.68 L[/tex]
To know more about STP, here
brainly.com/question/24050436
#SPJ4
A sample of 4. 25 moles of Hydrogen at 20. 0 ⁰C occupies a volume of 25. 0 L. Under what pressure is this sample?
The pressure of the Hydrogen gas sample is approximately 29.4 atm.
To find the pressure of the 4.25 moles of Hydrogen gas at 20.0°C and occupying a volume of 25.0 L, we can use the ideal gas law formula: PV = nRT, where P is pressure, V is volume, n is the number of moles, R is the ideal gas constant (8.314 J/mol·K), and T is the temperature in Kelvin.
First, convert the temperature to Kelvin: 20.0°C + 273.15 = 293.15 K.
Now, rearrange the formula to solve for pressure: P = nRT/V
Substitute the values: P = (4.25 moles) × (8.314 J/mol·K) × (293.15 K) / (25.0 L)
Calculate the pressure: P ≈ 3921.2 J/L
Since 1 J/L = 0.00750062 atm, convert the pressure to atm: P ≈ 3921.2 J/L × 0.00750062 atm/J·L ≈ 29.4 atm
So, the pressure of the Hydrogen gas sample is approximately 29.4 atm.
To learn more about hydrogen, refer below:
https://brainly.com/question/28937951
#SPJ11
Benzene at 20°C has a viscosity of 0. 000651 Pa. S. What shear stress is required to deform this fluid at a velocity gradient of 4900 s-1 ?
To calculate the shear stress required to deform benzene at a velocity gradient of 4900 s-1, we can use the equation:
Shear stress = viscosity x velocity gradient
Plugging in the given values, we get:
Shear stress = 0.000651 Pa. S x 4900 s-1
Shear stress = 3.19 Pa
Therefore, a shear stress of 3.19 Pa is required to deform benzene at a velocity gradient of 4900 s-1.
What is Shear stress?
Shear stress is a type of stress that occurs when a force is applied parallel to a surface or along a plane within a material. It is the result of the force causing the material to deform or change shape, with one part of the material sliding or shearing over another part.
Shear stress is often described in terms of the shear force per unit area, or shear strength, that is required to cause the material to shear or deform. The unit of measurement for shear stress is typically in pascals (Pa) or pounds per square inch (psi).
To know more about Shear stress:
https://brainly.com/question/12910262
#SPJ11
How do paleontologists determine the placement of a fossil for display? Explain how diagnostic structure is used for the accurate placement of a fossil
Paleontologists use a variety of methods to determine the placement of a fossil for display. One important factor is the diagnostic structure of the fossil, which refers to unique features that help to identify the species and its evolutionary relationships. For example, if a fossil has a particular shape or pattern on its shell, this could indicate a specific genus or species.
To accurately place a fossil for display, paleontologists will carefully examine its diagnostic structures and compare them to other specimens in their collection or in published research. They may also consult with experts in the field or use advanced imaging techniques to better understand the fossil's characteristics.
Once the paleontologists have identified the species and determined its placement, they can design a display that showcases the fossil in a way that is both educational and visually appealing. This may involve creating a custom mount or exhibit case, selecting appropriate lighting and text labels, and considering the context in which the fossil was found.
Overall, the accurate placement of a fossil for display is crucial for conveying its scientific significance to the public and helping people to better understand the history of life on Earth. By using diagnostic structure as a key tool in this process, paleontologists can ensure that the fossils are correctly identified and presented in a way that is both informative and engaging.
To know more about Paleontologists refer here
https://brainly.com/question/11805817#
#SPJ11
6. Consider the molecule xylene; and predict its reaction behavior with
1. Bromine solution
2. KMn04
3. AlCl3 and CHCI;
1. Xylene will react with bromine solution to undergo electrophilic aromatic substitution, where bromine will replace one of the hydrogen atoms on the aromatic ring.
2. Xylene will not react with KMnO₄ under normal conditions as it is a relatively stable aromatic compound.
3. Xylene can react with AlCl₃ and CHCl₃ under Friedel-Crafts conditions to form a substituted product. AlCl₃ acts as a Lewis acid, facilitating the reaction by generating a carbocation intermediate, which is then attacked by the chloride ion from CHCl3 to form a substituted product.
In summary, xylene will undergo electrophilic aromatic substitution with bromine solution, will not react with KMnO₄, and can undergo Friedel-Crafts reaction with AlCl₃ and CHCl₃ to form a substituted product.
To know more about electrophilic aromatic substitution click on below link:
https://brainly.com/question/28286554#
#SPJ11
You are placed in charge of building a brand new city in america. your fellow city planners do not want to use coal or gas to power the city. would you choose to use fission nuclear reactors or fusion nuclear reactors? what is your reasoning?
will give brainliest
In building a brand new city in America without using coal or gas, I would choose to use fission nuclear reactors over fusion nuclear reactors.
The reason behind choosing fission nuclear reactors is that they are currently more developed and widely used in practice than fusion nuclear reactors.
Fission reactors have proven their efficiency and safety in generating power for decades.
Fusion nuclear reactors, while having the potential for greater energy output and fewer radioactive waste issues, are still in the experimental stage and not yet commercially viable.
As a city planner, it's crucial to prioritize reliable and established energy sources for the city's needs. Therefore, using fission nuclear reactors would be a more feasible and practical choice for powering a new city in America.
To know more about nuclear fission visit:
https://brainly.com/question/29541275
#SPJ11
If you needed to make 2. 5 L of a 0. 2 M fruit drink solution from the 0. 7 M drink solution, how would you do it? (Hint: Use McVc = MdVd to find the amount of concentrated solution you need, then add water to reach 2. 5 L. )
The volume of the fruit drink comes out to be 0.712 L which is calculated in the below section.
Using the dilution law,
M1 V1 = M2 V2......(1)
Here, M represents the molarity and V represents the volume.
The given parameters are as follows-
M1 = 0.2 M
V1 = 2.5 L
M2 = 0.7 M
To calculate the volume of the fruit drink after dilution, substitute the known values in equation (1) as follows-
0.2 M x 2.5 L = 0.7 M x V2
V2 = (0.2 M x 2.5 L) / 0.7 M
= 0.5 / 0.7 L
= 0.7142 L
The volume comes out to be 0.712 L.
To learn more about molarity check the link below-
https://brainly.com/question/30404105
#SPJ4
If you have 500 ml of a 0.10 m solution of the acid, what mass of the corresponding sodium salt of the conjugate base do you need to make the buffer with a ph of 2.08 (assuming no change in volume)
The mass of the corresponding sodium salt of the conjugate base needed to make a buffer with a pH of 2.08.
To determine the mass of the corresponding sodium salt of the conjugate base needed to make a buffer with a pH of 2.08, you can follow these steps:
1. Identify the given information:
- Initial volume of acid solution: 500 mL
- Initial concentration of acid solution: 0.10 M
- Desired pH: 2.08
2. Use the Henderson-Hasselbalch equation:
pH = pKa + log ([conjugate base]/[acid])
3. Assuming the acid is a weak monoprotic acid (HA) and its conjugate base is A-, determine the pKa:
pKa = pH - log ([A-]/[HA])
4. Calculate the ratio of [A-] to [HA]:
[A-]/[HA] = 10^(pH-pKa)
5. Calculate the moles of HA in the 500 mL of 0.10 M solution:
moles of HA = (volume x concentration) = 500 mL x 0.10 mol/L = 0.050 mol
6. Calculate the moles of A- needed:
moles of A- = moles of HA x ([A-]/[HA]) ratio
7. Determine the molar mass of the sodium salt of the conjugate base (A-) using the molecular formula.
8. Calculate the mass of the sodium salt of the conjugate base:
mass = moles of A- x molar mass of A-
By following these steps, you will be able to determine the mass of the corresponding sodium salt of the conjugate base needed to make a buffer with a pH of 2.08.
To know more about conjugate base refer here: https://brainly.com/question/30086613#
#SPJ11
What mass of dilute trioxonitrate (V) containing 10% W/W of pure acid will be required to dissolve 2. 5g chalk CaCO3
31.45 g of dilute trioxonitrate (V) acid containing 10% W/W of pure acid will be required to dissolve 2.5 g of chalk.
We need to use balanced chemical equation of the reaction between calcium carbonate and trioxonitrate (V) acid to determine the number of moles of acid required to dissolve 2.5 g of chalk.
[tex]CaCO_3 + 2HNO_3 → Ca(NO_3)_2 + CO_2 + H_2O[/tex]
From the equation, one mole of [tex]CaCO_3[/tex] reacts with two moles of [tex]HNO_3[/tex]. The molar mass of CaCO3 is 100.09 g/mol.
[tex]Number\ of\ moles\ of\ CaCO_3 = 2.5 g / 100.09 g/mol = 0.02498 mol[/tex]
[tex]Number\ of\ moles\ of HNO_3 = 2 * 0.02498 = 0.04996 mol[/tex]
Now, we can calculate the mass of dilute trioxonitrate (V) acid containing 10% W/W of pure acid required to provide 0.04996 mol of [tex]HNO_3[/tex].
Assuming the density of the dilute trioxonitrate (V) acid is 1.1 g/cm3, the mass of the acid required will be:
[tex]Mass\ of\ acid = (0.04996 mol * 63.01 g/mol) / 0.1 = 31.45 g[/tex]
To know more about calcium carbonate, here
brainly.com/question/13565765
#SPJ4
A student claimed that a sample of pyrite at 25°c with a volume of 10 cm3 would
have a mass of 2 g. using the explanation of density given in the passage, explain
how the student incorrectly calculated the mass of the sample of pyrite. then,
determine the actual mass of the 10 cm sample of pyrite.
The student incorrectly calculated the mass of the sample of pyrite by assuming the density of pyrite to be 2 g/cm³, which is actually the density of water. The actual density of pyrite is about 5 g/cm³, so the actual mass of the 10 cm³ sample would be 50 g.
The student likely confused the concept of density, which is the mass per unit volume of a substance, with the specific gravity, which is the ratio of the density of a substance to the density of water.
Pyrite has a specific gravity of about 5, meaning that its density is about 5 times greater than that of water. Therefore, the mass of a 10 cm³ sample of pyrite would be 5 times greater than the mass of a 10 cm³ sample of water, or 50 g.
To learn more about Pyrite, here
https://brainly.com/question/13435246
#SPJ4
2.
for the reaction c + 2h2 - ch4, how many grams of hydrogen are required
to produce 0.6 moles of methane, ch4 ?
cannu help em do the whole paper
1.21 grams of hydrogen are required to produce 0.6 moles of methane (CH₄) in the given reaction.
The given reaction is:
C + 2H₂ → CH₄
We can see that 2 moles of hydrogen (H₂) are required to produce 1 mole of methane (CH₄) according to the balanced chemical equation. Therefore, to produce 0.6 moles of methane, we will need 2 times as many moles of hydrogen, which is:
number of moles of hydrogen = 2 × number of moles of methane
number of moles of hydrogen = 2 × 0.6 moles
number of moles of hydrogen = 1.2 moles
To convert the number of moles of hydrogen to grams, we need to use the molar mass of hydrogen, which is approximately 1.008 g/mol. Thus, the mass of hydrogen required can be calculated as:
mass of hydrogen = number of moles of hydrogen × molar mass of hydrogen
mass of hydrogen = 1.2 moles × 1.008 g/mol
mass of hydrogen = 1.21 g
To learn more about hydrogen follow the link:
https://brainly.com/question/31018544
#SPJ4
The complete question is:
For the reaction C+2H₂ → CH₄, how many grams of hydrogen are required to produce 0.6 moles of methane, CH₄?
Calculate the decrease in temperature when 3.00 L at 28.0 °C is compressed to 1.00 L.
Answer:
[tex]\huge\boxed{\sf T_2=100.3 \ K}[/tex]
Explanation:
Given data:Volume 1 = [tex]V_1[/tex] = 3.00 L
Volume 2 = [tex]V_2[/tex] = 1.00 L
Temperature 1 = [tex]T_1[/tex] = 28 °C + 273 = 301 K
Required:Temperature 2 = [tex]T_2[/tex] = ?
Formula:[tex]\displaystyle \frac{V_1}{T_1} = \frac{V_2}{T_2}[/tex] (Charles Law)
Solution:Put the given data in the above formula.
[tex]\displaystyle \frac{3.00}{301} = \frac{1.00}{T_2} \\\\Cross \ Multiply\\\\3 \times T_2=301 \times 1\\\\3T_2= 301\\\\Divide \ both \ sides \ by \ 3\\\\T_2=301/3\\\\T_2=100.3 \ K\\\\\rule[225]{225}{2}[/tex]
Calculate the moles of barium phosphate that will react with 1.60 g of aluminum hydroxide. you need to write and balance the equation, then solve it.
A total of 0.0103 moles of barium phosphate will react with 1.60 g of aluminum hydroxide.
The balanced chemical equation for the reaction between barium phosphate and aluminum hydroxide is:
Ba₃(PO₄)₂ + 2 Al(OH)₃ → 2 AlPO₄ + 3 Ba(OH)₂
To calculate the moles of barium phosphate that will react with 1.60 g of aluminum hydroxide, we need to convert the given mass of aluminum hydroxide into moles using its molar mass:
Molar mass of Al(OH)₃ = 78 g/mol
Number of moles of Al(OH)₃ = 1.60 g / 78 g/mol = 0.0205 mol
According to the balanced chemical equation, 2 moles of Al(OH)3 react with 1 mole of Ba3(PO4)2. Therefore, the number of moles of Ba₃(PO₄)₂ required can be calculated as:
Number of moles of Ba₃(PO₄)₂ = (0.0205 mol Al(OH)₃) / 2 = 0.0103 mol
To know more about balanced chemical equation click on below link:
https://brainly.com/question/28294176#
#SPJ11
Use the Beer’s law plot and best fit line to determine the concentrations for samples: M21050-1 0. 359
M21050-2 0. 356
M21050-3 0. 339
M21050-4 0. 376
M21050-5 0. 522
Beer's law establishes a connection between a substance's concentration in a solution and its absorbance at a certain wavelength.
By charting the absorbance vs concentration of each solution, a Beer's law plot is created in order to calculate concentrations of a series of copper(II) sulfate solutions with known absorbances at a set wavelength. The resulting graph should be a straight line that the least-squares approach can fit with a linear equation. The molar absorptivity is represented by slope of the best-fit line, and the absorbance at zero concentration is represented by the y-intercept. By measuring the absorbance of the unknown copper(II) sulfate solutions and solving for concentration using the equation, the concentrations of unknown solutions can be found.
To know more about Beer's law, here
brainly.com/question/30723190
#SPJ4
--The complete Question is, Use Beer's law plot and best-fit line to determine the concentrations for a series of copper(II) sulfate solutions with known absorbances at a fixed wavelength. --
Under what circumstances is an exothermic reaction non-spontaneous?.
An exothermic reaction is spontaneous if the overall Gibbs free energy change (ΔG) is negative, indicating that the reaction is energetically favorable and will proceed without an external energy input. However, an exothermic reaction can become non-spontaneous under certain circumstances.
One such circumstance is when the entropy change (ΔS) is negative. If ΔH is negative (exothermic) but ΔS is also negative (decrease in disorder), the value of ΔG could still be positive (non-spontaneous) or close to zero (at equilibrium) at temperatures where ΔH is not sufficiently large to overcome the negative ΔS.
This means that even though energy is released during the reaction, the decrease in disorder can make the reaction unfavorable.
Another circumstance is when the reactants are in a highly ordered or low-energy state, and the products are in a highly disordered or high-energy state. In such cases, the enthalpy change (ΔH) may be negative (exothermic), but the entropy change (ΔS) is also positive, and the resulting ΔG value may still be positive, making the reaction non-spontaneous.
To know more about exothermic reaction refer to-
https://brainly.com/question/10373907
#SPJ11
Determine the ph if 50.0 ml of 0.75 m hi solution is added to 0.027 l of a 0.05 m koh solution
The pH of the resulting solution is about 0.33.
To determine the pH of the resulting solution when 50.0 mL of 0.75 M HI solution is added to 0.027 L of a 0.05 M KOH solution, we first need to find the moles of each reactant and then determine the concentration of the remaining ions.
1. Calculate moles of HI:
Volume (L) = 50.0 mL × (1 L / 1000 mL) = 0.050 L
Moles of HI = Volume (L) × Molarity = 0.050 L × 0.75 M = 0.0375 mol
2. Calculate moles of KOH:
Moles of KOH = Volume (L) × Molarity = 0.027 L × 0.05 M = 0.00135 mol
3. Determine the limiting reactant and the amount of remaining ions:
Since HI is a strong acid and KOH is a strong base, they will react completely in a 1:1 ratio. KOH is the limiting reactant, and there will be a remaining amount of HI.
Moles of remaining HI = Moles of HI - Moles of KOH = 0.0375 mol - 0.00135 mol = 0.03615 mol
4. Calculate the concentration of remaining H+ ions:
Total volume of the solution = 0.050 L (HI) + 0.027 L (KOH) = 0.077 L
Concentration of H+ ions = Moles of remaining HI / Total volume = 0.03615 mol / 0.077 L = 0.469 M
5. Determine the pH of the solution:
pH = -log10([H+]) = -log10(0.469) ≈ 0.33
The pH of the resulting solution is approximately 0.33.
To learn more about concentration, refer below:
https://brainly.com/question/10725862
#SPJ11
B) Express the answer to this multistep calculation using the appropriate number of significant figures: 87. 95 feet x 0. 277 feet +5. 02 feet - 1. 348 feet + 10. 0 feet.
The answer to the multistep calculation, expressed using the appropriate number of significant figures, is 24.3 feet.
In order to determine the appropriate number of significant figures in the answer, we need to follow the rules of significant figures for addition and subtraction.
When adding or subtracting numbers, the answer should be rounded to the same number of decimal places as the measurement with the least number of decimal places.
Here, the measurement with the least number of decimal places is 10.0 feet, which has one decimal place. Therefore, we should round the final answer to one decimal place as well.
Now, let's perform the calculation:
87.95 feet x 0.277 feet + 5.02 feet - 1.348 feet + 10.0 feet = 24.3108725 feet
Rounding to one decimal place, the final answer is:
24.3 feet
Therefore, the answer to the multistep calculation, expressed using the appropriate number of significant figures, is 24.3 feet.
To know more about significant figures refer here:
https://brainly.com/question/29153641
#SPJ11
What mass of KNO3 is needed to create a saturated solution at 60 °C in 240. 0 mL of distilled
water?
Approximately 148.8 g of KNO₃ is needed to create a saturated solution at 60°C in 240.0 mL of distilled water.
The mass of KNO₃ needed to create a saturated solution at 60°C in 240.0 mL of distilled water depends on the solubility of KNO₃ at that temperature.
The solubility of KNO₃ in water increases with temperature. At 60°C, the solubility of KNO₃ is approximately 62 g per 100 mL of water.
Thus, the quantity of KNO₃ required to form a saturated solution in 240.0 mL of water can be determined using the following procedure.:
Mass of KNO₃ = (62 g/100 mL) x (240.0 mL) = 148.8 g
To know more about price solubility, refer here:
https://brainly.com/question/17647006#
#SPJ11
Find the molarity of 194. 55 g of sugar (C12H22O11) in 250. ML of water
To find the molarity of a solution, we need to know the number of moles of solute (in this case, sugar) and the volume of the solution in liters. We can use the given mass of sugar and the molar mass of sugar to find the number of moles:
Mass of sugar = 194.55 g
Molar mass of sugar (C12H22O11) = 342.3 g/mol
Number of moles of sugar = Mass of sugar / Molar mass of sugar
Number of moles of sugar = 194.55 g / 342.3 g/mol
Number of moles of sugar = 0.568 mol
Now we need to convert the given volume of the solution (250 mL) to liters:
Volume of solution = 250 mL
Volume of solution = 250 mL / 1000 mL/L
Volume of solution = 0.250 L
Finally, we can use the number of moles of sugar and the volume of the solution to calculate the molarity:
Molarity = Number of moles of sugar / Volume of solution
Molarity = 0.568 mol / 0.250 L
Molarity = 2.27 M
Therefore, the molarity of the sugar solution is 2.27 M.
To know more about molarity refer here
https://brainly.com/question/31545539#
#SPJ11
Assume a gallon of gasoline contains 2370. 0 grams of octane. How many grams of carbon dioxide would be
produced by the complete combustion of the octane in this gallon of gasoline?
In 2017, people in the US used about 143 billion gallons of gasoline. How many grams of carbon dioxide
were generated by the combustion of this gasoline, assuming the value you calculated in the first question
was accurate?
The complete combustion of one gallon of gasoline containing 2370.0 grams of octane produces 6888.2 grams of carbon dioxide.
In 2017, people in the US generated approximately 9.85 x 10¹⁴ grams of carbon dioxide by burning 143 billion gallons of gasoline.
1. Write the balanced chemical equation for the combustion of octane:
2C₈H₁₈ + 25O₂ → 16CO₂ + 18H₂O
2. Determine the molecular weight of octane (C₈H₁₈) and carbon dioxide (CO₂):
C₈H₁₈: (8 x 12.01) + (18 x 1.01) = 114.23 g/mol
CO₂: (1 x 12.01) + (2 x 16.00) = 44.01 g/mol
3. Use stoichiometry to find the grams of CO₂ produced from the combustion of 2370.0 grams of octane:
(2370.0 g octane) x (16 mol CO₂/ 2 mol octane) x (44.01 g CO₂ / mol CO₂) = 6888.2 g CO₂
4. Calculate the total grams of CO₂ generated by burning 143 billion gallons of gasoline in the US in 2017:
(143 billion gallons) x (6888.2 g CO₂ / gallon) = 9.85 x 10¹⁴ grams of CO₂
To know more about balanced chemical equation click on below link:
https://brainly.com/question/28294176#
#SPJ11
If a gas is cooled from 523 K to 273 K and volume is kept constant
what final pressure would result if the original pressure was 745 mm
Hg?
Answer:
388.88 mmHg (2 d.p.)
Explanation:
To find the final pressure when the volume is kept constant, we can use Gay-Lussac's law.
Gay-Lussac's law[tex]\boxed{\sf \dfrac{P_1}{T_1}=\dfrac{P_2}{T_2}}[/tex]
where:
P₁ is the initial pressure.T₁ is the initial temperature (in kelvins).P₂ is the final pressure.T₂ is the final temperature (in kelvins).The values to substitute into the equation are:
P₁ = 745 mmHgT₁ = 523 KT₂ = 273 KSubstitute the values into the equation and solve for P₂:
[tex]\implies \sf \dfrac{P_1}{T_1}=\dfrac{P_2}{T_2}[/tex]
[tex]\implies \sf \dfrac{745}{523 }=\dfrac{P_2}{273}[/tex]
[tex]\implies \sf P_2=\dfrac{745 \cdot 273}{523 }[/tex]
[tex]\implies \sf P_2=\dfrac{203385}{523 }[/tex]
[tex]\implies \sf P_2=388.88145315...[/tex]
[tex]\implies \sf P_2=388.88\;mmHg\;(2\;d.p.)[/tex]
Therefore, the final pressure would be 388.88 mmHg if a gas is cooled from 523 K to 273 K and the volume is kept constant, starting with an initial pressure of 745 mmHg.
A 282. 8 g sample of copper releases 175. 1 calories of heat. The specific heat capacity of copper is 0. 092 cal/(g·°C). By how much did the temperature of this sample change, in degrees Celsius?
The temperature of this 282.8 g copper sample changed by approximately 6.78 degrees Celsius.
To find the temperature change of a 282.8 g sample of copper that releases 175.1 calories of heat with a specific heat capacity of 0.092 cal/(g·°C), we can use the following formula:
q = mcΔT
where:
q = heat released (calories)
m = mass of the sample (grams)
c = specific heat capacity (cal/(g·°C))
ΔT = temperature change (°C)
Step 1: Plug in the given values into the formula.
175.1 = (282.8)(0.092)(ΔT)
Step 2: Solve for ΔT.
ΔT = 175.1 / (282.8× 0.092)
Step 3: Calculate the value of ΔT.
ΔT ≈ 6.78 °C
So, the temperature of this 282.8 g copper sample changed by approximately 6.78 degrees Celsius.
To know more about specific heat capacity :
https://brainly.com/question/29766819
#SPJ11
Use the drop-down menus to rank the boiling points of the following hydrocarbons. Use a "1" to indicate the compound with the lowest boiling point.
The boiling points of the hydrocarbons can be ranked as follows;
1. 4
2. 2
3. 3
4. 1
What controls the boiling points of the hydrocarbons?The size of the molecules and the nature of the intermolecular interactions between the molecules essentially determine the boiling points of hydrocarbons.
Because they have more electrons and a larger surface area available for intermolecular interactions like Van der Waals forces, larger hydrocarbon molecules typically have higher boiling points.
Additionally, polar hydrocarbons and those that can form hydrogen bonds have higher boiling points than non-polar hydrocarbons because of stronger intermolecular forces.
Learn more about hydrocarbons:https://brainly.com/question/31643106
#SPJ1