Total mass = number of pennies x mass per penny
Given that you have 125 pennies, and the average penny has a mass of 2.50 g, we can plug in these values to get:
Total mass = 125 x 2.50 g
Total mass = 312.50 g
Therefore, the total mass of the pennies is 312.50 grams.
a pure titanium cube has an edge length 2.77 in. how many titanium atoms does i contain? titanium does have a density of 4.50 g/cm^3
The question asks, "How many titanium atoms does a pure titanium cube with an edge length of 2.77 inches contain?"
Given that titanium has a density of 4.50 g/cm^3, thus the number of titanium atoms present in the cube is 2.44 x 1024 atoms.
We can calculate the answer by using the following formula: Atoms = Volume x (Atomic Mass / Molecular Mass)
Step 1: Calculate the volume of the cube: Volume = (Edge Length)3 = (2.77 in)3 = 24.4 in3
Step 2: Calculate the number of atoms: Atoms = 24.4 in3 x (47.867/47.867) = 24.4 in3
Therefore, the pure titanium cube with an edge length of 2.77 inches contains 24.4 in3 of titanium atoms.
Read more about volume:
https://brainly.com/question/463363
#SPJ11
for each compound (all water soluble), would you expect the resulting aqueous solution to conduct electrical current? check all that apply.
To determine if a compound will conduct electrical current when dissolved in water, we need to consider its ability to dissociate into ions in solution.
Ionic compounds and strong electrolytes are capable of dissociating into ions, and therefore can conduct electricity in aqueous solution, while non-electrolytes do not dissociate into ions and do not conduct electricity.
Let's take a closer look at the different types of compounds and their behavior in solution:
Ionic compounds: These are compounds composed of ions, which are atoms or molecules that have gained or lost electrons, resulting in a net electrical charge.
When an ionic compound dissolves in water, the ions separate and are surrounded by water molecules through a process called hydration. The resulting solution can conduct electricity because the ions are free to move and carry an electric charge.
Examples of ionic compounds include sodium chloride (NaCl), potassium nitrate (KNO3), and calcium chloride (CaCl2).
Strong electrolytes: These are compounds that are capable of completely dissociating into ions when dissolved in water. Strong electrolytes include soluble ionic compounds, as well as strong acids and bases.
They readily conduct electricity in aqueous solution due to the presence of free ions. Examples of strong electrolytes include hydrochloric acid (HCl), sulfuric acid (H2SO4), and sodium hydroxide (NaOH).
Weak electrolytes: These are compounds that only partially dissociate into ions when dissolved in water. They conduct electricity to a lesser extent compared to strong electrolytes.
Weak electrolytes include weak acids and bases, and their degree of ionization depends on factors such as concentration and pH. Examples of weak electrolytes include acetic acid (CH3COOH) and ammonia (NH3).
Non-electrolytes: These are compounds that do not dissociate into ions when dissolved in water, and therefore do not conduct electricity. Non-electrolytes are typically covalent compounds, which are composed of atoms that share electrons rather than gaining or losing them. Examples of non-electrolytes include sugars, alcohols, and most organic compounds.
To determine if a compound will conduct electricity in aqueous solution, we need to assess its ability to dissociate into ions based on its chemical nature and behavior in water. If you provide specific compounds, I would be happy to evaluate their conductivity for you.
To learn more about electrolytes, refer below:
https://brainly.com/question/29771118
#SPJ11
why is it important not to dilute the initial sample befoe it has been loaded onto the chromatography column
It is important not to dilute the initial sample before loading it onto the chromatography column because this can negatively impact the separation and resolution of the components in the sample.
Dilution can lead to a decrease in the concentration of the components in the sample, which can result in poor separation and overlap of the peaks. Additionally, dilution can cause loss of the target compound or impurities in the sample due to adsorption onto the walls of the container used for dilution.
By keeping the sample concentrated and loading it directly onto the chromatography column, the chances of obtaining a clear separation and good resolution of the components in the sample are increased
To learn more about chromatography column refer to:
brainly.com/question/30296545
#SPJ4
which statement is true a-in a reaction, oxidation can occur independently of reduction b-a redox reaction involves either the transfer of an electron or a change in oxidation state of an element c-if any of the reactants or products in a reaction contain oxygen the reaction is a redox reaction d- the reducing agent reduces another substance and is itself oxidized
The correct statement is option B - A redox reaction involves either the transfer of an electron or a change in oxidation state of an element.Redox reactions involve the transfer of electrons from one substance to another.
The term "redox" refers to the simultaneous oxidation and reduction of molecules in the reaction, with one molecule losing electrons and the other gaining electrons.
Redox reactions is:Oxidation: Loss of electronsReduction: Gain of electrons. A molecule or atom that loses electrons is said to be oxidized, while one that gains electrons is said to be reduced.
The oxidized substance is an oxidizing agent, while the reduced substance is a reducing agent.
The statement "A redox reaction involves either the transfer of an electron or a change in oxidation state of an element" is true as the redox reaction involves both reduction and oxidation reactions.
Any substance that is oxidized should be reduced by another substance, and vice versa. Thus, a redox reaction involves the transfer of electrons from one substance to another.
Although oxygen is often present in redox reactions, it is not a necessary component of them. So, the statement C is false, and oxidation can not occur independently of reduction, so the statement A is false too.
The reducing agent reduces another substance and is itself oxidized; thus, statement D is also true.
to know more about redox reaction refer here:
https://brainly.com/question/13293425#
#SPJ11
1.
2.
Grams of solute
3.
4.
0600
150
140
130
120
110
100
90
80
70
60
50
40
30
20
10
NH37
Solubility Curve
KCIÓ3
FONX
NHẠC
O
0 10 20 30 40 50
KCI
Naci
Ce2(SO4)3
60 70 80 90 100
Temperature (°C)
How many grams of ammonium chloride (NH4Cl) is dissolved at 50°C?
Which compound is least soluble in water at 10°C?
How many grams of KNO3 can be dissolved at 50°C?
Are the following solutions unsaturated, saturated, or supersaturated?
a.
45g of NaNO3 in 100 g of water at 30°C.
b. 60g of KClO3 in 100 g of water at 60°C.
5. How many grams of NaNO3 are required to saturate 100 grams of water at
75°C?
6. At what temperature would 25g of potassium chlorate (KClO3) dissolve?
7. 89 g NaNO3 is prepared at 30°C.
From the solubility curve:
37 grams of NH₄Cl can be dissolved at 50°C.Sodium chloride (NaCl) is the least soluble compound40 grams of KNO₃ a. unsaturated, b. supersaturated.100 grams 45°CHow to determine saturation and temperature?According to the solubility curve for KNO₃, approximately 40 grams of KNO₃ can be dissolved at 50°C.
a. Since 45g of NaNO₃ in 100 g of water at 30°C is below the saturation point, the solution is unsaturated.
b. Since 60g of KClO3 in 100 g of water at 60°C is above the saturation point, the solution is supersaturated.
To determine how many grams of NaNO₃ are required to saturate 100 grams of water at 75°C, we need to look at the solubility curve for NaNO₃. At 75°C, approximately 75 grams of NaNO₃ can be dissolved in 100 grams of water. Therefore, to saturate 100 grams of water, we would need to add 75 grams of NaNO₃.
To find the temperature at which 25g of KClO₃ dissolves, we need to look at the solubility curve for KClO₃. At 25g, the curve intersects the solubility line at approximately 45°C, so 25g of KClO₃ would dissolve at 45°C.
Learn more on saturation point here: https://brainly.com/question/23866986
#SPJ1
boron is composed of two naturally occurring isotopes, 10b and 11b. which of these isopotes is the most abundant in nature?
The most abundant isotope of boron found in nature is 11B. This isotope makes up approximately 80% of all boron atoms, while the other isotope 10B makes up the other 20%.
Boron is a chemical element with the symbol B and atomic number 5. Boron has two naturally occurring isotopes, 10B and 11B. Boron-11 is the most abundant of the two isotopes with an abundance of 80.1%.Boron-10 is a stable isotope of boron that accounts for 19.9% of the Earth's naturally occurring boron. The isotope has an atomic mass of 10.012937u or 10.013u.A neutron makes the difference between the isotopes of boron, which has an atomic number of 5. Boron-10 contains five protons and five neutrons, whereas boron-11 has six neutrons in addition to the five protons.
The mass number of boron-10 is ten since it contains ten particles in total (5 protons + 5 neutrons). "Boron is composed of two naturally occurring isotopes, 10B and 11B. is the isotope boron-11 (11B) is the most abundant in nature with an abundance of 80.1%.
For more such questions on isotope , Visit:
https://brainly.com/question/14220416
#SPJ11
the atomic electron configuration inflluences the resulting mechanical properties of the material true false
The statement "the atomic electron configuration influences the resulting mechanical properties of the material" is TRUE. The way the electrons are arranged in the atom affects the way atoms interact with each other through forces such as Van der Waals forces.
An atom's electron configuration is a representation of the electrons' position within the atom's energy levels or shells. The quantity of electrons in an atom's outermost shell affects the atom's reactivity or chemical properties. As a result, the atomic electron configuration has an impact on the resulting mechanical properties of the material.
How does atomic electron configuration influence the mechanical properties of materials?
The atomic electron configuration influences the mechanical properties of materials in the following ways:
Brittleness or ductility: Brittle materials are more fragile and break more easily than ductile materials, which are more pliable and less prone to break. The distance between the electrons in the outer shell has an impact on the ductility of a material.Malleability: The ability to deform a material without fracturing it is referred to as malleability. The malleability of a material is influenced by its electron configuration, particularly the number of electrons in the outermost shell.Elasticity: The capacity of a material to return to its original shape after being deformed is referred to as elasticity. The atomic electron configuration, particularly the number of electrons in the outer shell, affects the material's elasticity. The more electrons there are, the greater the material's elasticity.For more questions related to atomic electron configuration .
https://brainly.com/question/29757010
#SPJ11
Describe how finding the formula differs between Ionic and Covalent compounds.
Answer:
covalent compounds
CsF
Nao
CHN
PCI
CAO
NH
WO
lonic compounds
CS
CdBr
N
SOS
when 0.2 moles of hydrofluoric acid are added to 100 ml of water, the resulting solution has a ph equal to 4. what is the percent dissociation of hf?
The percent dissociation of HF is 144%. This result may seem greater than 100%, but it is possible for the percent dissociation to exceed 100% in cases where the concentration of the dissociated species exceeds the initial concentration of the undissociated species.
What is Percent Dissociation?
Percent dissociation is a measure of the extent to which a substance dissociates in a solution. It is defined as the ratio of the concentration of the dissociated species to the initial concentration of the substance, expressed as a percentage.
The first step in solving this problem is to write the equation for the dissociation of hydrofluoric acid (HF) in water:
HF + H2O ⇌ H3O+ + F-
Ka = [H3O+][F-] / [HF]
Since the pH of the solution is given as 4, we know that:
[H3O+] = 10^-4 M
We can use the given initial concentration of HF and the expression for Ka to solve for the concentration of F- at equilibrium. Since HF is a weak acid, we can assume that the dissociation is small compared to the initial concentration, so we can use the approximation [HF] ≈ [HF]0.
Ka = [H3O+][F-] / [HF]0
[F-] = Ka [HF]0 / [H3O+]
[F-] = (7.2 × 10^-4)(0.2 mol / 0.1 L) / (10^-4 M)
[F-] ≈ 0.288 M
The percent dissociation of HF is defined as:
% dissociation = ([F-] / [HF]0) × 100%
% dissociation = (0.288 M / 0.2 mol / 0.1 L) × 100%
% dissociation = 144%
Learn more about Percent Dissociation from given link
https://brainly.com/question/30445997
#SPJ1
a solution of cacl2 cacl 2 in water forms a mixture that is 31.5% 31.5 % calcium chloride by mass. if the total mass of the mixture is 195.4 g, 195.4 g, what masses of cacl2 cacl 2 and water were used?
The masses of calcium chloride (CaCl2) and water used to form the mixture are 61.18 g and 134.22 g, respectively.
The mass of calcium chloride (CaCl2):
The percentage of calcium chloride (CaCl2) in the mixture is 31.5%.
Multiply the total mass of the mixture (195.4 g) by 31.5% to find the mass of calcium chloride (CaCl2) in the mixture:
Mass of calcium chloride (CaCl2) = (195.4 g) x (31.5%) = 61.18 g
The mass of water:
Subtract the mass of calcium chloride (CaCl2) from the total mass of the mixture (195.4 g) to find the mass of water in the mixture:
Mass of water = (195.4 g) - (61.18 g) = 134.22 g
Therefore, masses of calcium chloride (CaCl2) and water used to form the mixture are 61.18 g and 134.22 g, respectively.
to know more about calcium chloride refer here:
https://brainly.com/question/15296925#
#SPJ11
calculate the number of vacancies per m^3 for gold at 900 c. the energy for vacancy formation is 0.86 ev/atom
At 900°C, the number of vacancies per m^3 for gold is 1.32 x 10^17 vacancies per m^3.
The number of vacancies per m^3 for gold at 900°C, the energy for vacancy formation (0.86 eV/atom) must be known.
Vacancies are atoms that are missing from the crystal lattice, so we must use the energy of vacancy formation to calculate how many vacancies can exist at a given temperature.
At 900°C, the energy of vacancy formation is 0.86 eV/atom. This energy is equal to 8.6 x 10^-19 Joules. The number of vacancies per m^3,
Number of vacancies = (Energy of vacancy formation / Boltzmann's Constant x Temperature) / Atom's Volume
Number of vacancies = (8.6 x 10^-19 / 1.38 x 10^-23 x 900) / 4.20 x 10^-29
Number of vacancies = 1.32 x 10^17 vacancies per m^3
Therefore, at 900°C, the number of vacancies per m^3 for gold is 1.32 x 10^17 vacancies per m^3.
It's important to note that this number is temperature dependent; if the temperature of the gold is increased or decreased, the number of vacancies per m^3 will also change.
As temperature increases, the number of vacancies per m^3 will increase and vice versa.
to know more about vacancies refer here:
https://brainly.com/question/12598037#
#SPJ11
an unknown gas effuses at a rate 0.667 times the rate of no. what is the molar mass of the unknown gas?
Answer:
The molar mass of the unknown gas is:
Munknown = (28 g/mol)2 / 0.667 = 83.6 g/mol
The molar mass of the unknown gas can be determined by the Graham's Law of Effusion. According to this law, the rate of effusion of a gas is inversely proportional to the square root of its molar mass.
Thus, if the rate of effusion of the unknown gas is 0.667 times that of Nitrogen (N2), then its molar mass can be calculated as:
Munknown = (MN2)2 / 0.667
Where, MN2 is the molar mass of Nitrogen (28 g/mol).
Therefore, the molar mass of the unknown gas is:
Munknown = (28 g/mol)2 / 0.667 = 83.6 g/mol
Learn more about Graham's Law of Effusion here:
https://brainly.com/question/22359712#
#SPJ11
Which one of the following compounds is not a product of reaction between 1,3-butadiene and HBr? Select one a. (S)-3-bromo-1-butene b. (R)-3-bromo-1-butene c. (E)-1-bromo-2-butene d. (Z)-1-bromo-2-butene e. (Z)-2-bromo-2-butene
The correct option is E. The compound that is not a product of the reaction between 1,3-butadiene and HBr is (Z)-2-bromo-2-butene.
A chemical reaction is a process in which one or more substances (reactants) are transformed into new substances (products) by breaking and forming chemical bonds. Chemical reactions are essential in many natural and synthetic processes, including the formation of the molecules that make up living organisms and the production of materials such as medicines, fuels, and plastics.
Chemical reactions involve the rearrangement of atoms, ions, or molecules, resulting in the formation of new substances with different properties from those of the reactants. The reactants and products of a chemical reaction can be represented by a chemical equation, which shows the identities and quantities of the reactants and products.
To learn more about Reaction visit here:
brainly.com/question/17434463
#SPJ4
what is the force magnitude (in nn) between a positive sodium ion and a negative chloride ion in an ionic nacl crystal if the are 0.5 nm apart?
The force magnitude between a positive sodium ion and a negative chloride ion in an ionic NaCl crystal is 4.47 x 10^-8 N (Newtons). This force is due to electrostatic attraction between the two ions.
The electrostatic potential energy of the system. This is done using the equation U = kqQ/r,
where k is the Coulomb's constant (8.99 x 10^9 Nm^2/C^2), q is the charge of the sodium ion (+1.6 x 10^-19 C), Q is the charge of the chloride ion (-1.6 x 10^-19 C), and r is the distance between them (0.5 nm).
U = 8.99 x 10^9 x 1.6 x 10^-19 x (-1.6 x 10^-19) / 0.5 x 10^-9, which simplifies to 4.47 x 10^-8 N.
The electrostatic potential energy is a measure of the work done in bringing two charges together, and is also equal to the magnitude of the electrostatic force.
Therefore, the force magnitude between the two ions is 4.47 x 10^-8 N.
The electrostatic force between the two ions acts along the line joining them, pushing the positive sodium ion towards the negative chloride ion.
The magnitude of this force is attractive, as the two ions have opposite charges, and is 4.47 x 10^-8 N, as calculated above.
This electrostatic force is strong enough to hold the ions together in the ionic crystal lattice of NaCl.
to know more about electrostatic refer here:
https://brainly.com/question/31042490#
#SPJ11
the process of sequential migration of electrons from one atom to the next is called , while the migration of electrons across a pn semiconductor junction is called
The process of sequential migration of electrons from one atom to the next is called electron hopping, while the migration of electrons across a pn semiconductor junction is called diffusion.
The process of sequential migration of electrons from one atom to the next is called electronic conduction, while the migration of electrons across a pn semiconductor junction is called diffusion. Electronic conduction is the movement of charged particles in a medium, typically electrons or holes. The term is commonly used to describe the behavior of electrons in a conductor, which allows them to move freely through the material in response to an electric field. This movement of electrons is what produces the flow of electricity, which is an essential part of our daily lives.
In materials science, diffusion refers to the movement of atoms or molecules from a region of high concentration to a region of low concentration. This process is driven by the random motion of particles, which results in a net flow from areas of high to low concentration. In semiconductors, diffusion is a significant factor in the operation of devices such as diodes and transistors. When a p-type and n-type semiconductor are joined together, there is a gradient in the concentration of electrons between the two regions. This gradient causes electrons to move across the junction by diffusion, which creates a flow of current.
For more such questions on diffusion , Visit:
https://brainly.com/question/14852229
#SPJ11
which was an assumption bohr made in his model? select the correct answer below: wavelengths have negative values. energy values were quantized. neutrons are negatively charged. electrons are found in the nucleus.
Electrons are found in orbits around the nucleus. This was an assumption Bohr made in his model.
Compared to the valence shell model, the Bohr's model of the hydrogen atom is quite simple. It may be seen as an outmoded scientific theory since it may be derived from the more comprehensive and precise quantum mechanics as a first-order approximation of the hydrogen atom.To expose students to quantum mechanics or energy level diagrams before moving on to the more accurate but more challenging valence shell atom, the Bohr model is still often used in classroom instruction.This is due of its simplicity and its right conclusions for a few systems.
learn more about Bohr's model Refer:brainly.com/question/11801538
#SPJ1
a certain reaction has an activation energy of 34.34 kj/mol. 34.34 kj / mol. at what kelvin temperature will the reaction proceed 3.00 3.00 times faster than it did at 357 k?
The reaction will proceed 3 times faster than it did at 357 k at a temperature of 828 K.
The Arrhenius equation describes the effect of temperature on reaction rate. It is given by:
k = Ae^(-Ea/RT)
where k is the rate constant, A is the pre-exponential factor, Ea is the activation energy, R is the gas constant, and T is the temperature in Kelvin.
Rearranging this equation, we have ln(k) = ln(A) - (Ea/RT).
A certain reaction has an activation energy of 34.34 kJ/mol. At 357 K, the rate constant for the reaction is k1. When the reaction is 3 times faster, the rate constant will be 3k1.
Substituting these values in the Arrhenius equation, we have:
ln(3k1) = ln(A) - (34.34 kJ/mol)/(R*T)
ln(k1) = ln(A) - (34.34 kJ/mol)/(R*357 K)
Subtracting these two equations, we obtain:
ln(3) = (34.34 kJ/mol)/(R*k1*T)
Solving for T, we have:
T = (34.34 kJ/mol)/(R*k1*ln(3))
Putting the given values, we get:
T = (34.34 kJ/mol)/(8.314 J/K*mol*3.00*ln(3))
T = 828 K
Therefore, the reaction will proceed 3.00 times faster at 828 K compared to 357 K.
Learn more about Arrhenius equation here: https://brainly.com/question/13467424.
#SPJ11
determine the volume of hexane that contains 5.33 x 10^22 molecules of hexane. the density of hexane is 0.6548 g/ml and its molar mass is 86.17 g/mol
The volume of hexane that contains 5.33 x 10²² molecules of hexane is approximately 11.68 mL.
To calculate the number of moles of hexane in 5.33 x 10²² molecules, use the formula,
Number of moles = Number of molecules / Avogadro's number
= 5.33 x 10²² / 6.022 x 10²³
= 0.0887 moles
Next, we can use the density and molar mass of hexane to calculate the volume of hexane:
Mass of hexane = Number of moles x Molar mass
= 0.0887 moles x 86.17 g/mol
= 7.655 g
The volume of hexane = Mass of hexane / Density
= 7.655 g / 0.6548 g/mL
= 11.68 mL
Therefore, the volume of hexane that contains 5.33 x 10²² molecules of hexane is approximately 11.68 mL.
Learn more about molar mass here:
https://brainly.com/question/837939
#SPJ11
the decomposition of a generic diatomic element in its standard state is represented by the equation
The decomposition of a generic diatomic element in its standard state is represented by the equation [tex]X_{2}[/tex] → 2X, where X represents the diatomic element.
The given equation for the decomposition of a generic diatomic element in its standard state is: [tex]M_{2}[/tex](g)→2M(g).
Explanation: In the given equation, the diatomic element M2 dissociates to form two monatomic atoms of M gas, which is its standard state. The reaction is therefore an example of a decomposition reaction, where a compound is broken down into simpler substances.
The standard state of a substance is the most stable form of the element at a pressure of 1 atm and a temperature of 298 K. For diatomic elements like M2, the standard state is a gas phase where the atoms are in their most stable form as monoatomic atoms, rather than as molecules.
For more questions related to decomposition.
https://brainly.com/question/8009068
#SPJ11
in the experiment where o2 consumption is measured with a respirometer how is a constant volume achieved?
by use identical respirometers. An intermediary in this process is pyruvate.
What kind of process uses pyruvate as an intermediary?Pyruvate is a crucial intermediary in several metabolic processes, including gluconeogenesis, fermentation, cellular respiration, fatty acid production, etc. Pyruvate is created near the conclusion of the glycolysis process. Through Kreb's cycle, pyruvate gives energy to living cells.
Is pyruvate a metabolic intermediary in all processes?Pyruvate is a crucial intermediate that can be employed in a number of anabolic and catabolic pathways, including as oxidative metabolism, glucose re-synthesis (gluconeogenesis), cholesterol synthesis (de novo lipogenesis), and maintenance of the tricarboxylic acid (TCA) cycle flow.
To know more about respirometers visit:-
https://brainly.com/question/15609292
#SPJ1
why does the procedure use a graduated cylinder and not simply have you put 2 ml of solution directly into the test tube?
A graduated cylinder is necessary to ensure accurate and precise measurements.
The use of a graduated cylinder to measure 2 ml of the solution instead of pouring the solution directly into the test tube is necessary to ensure accurate and precise measurements. Graduated cylinders are calibrated instruments that have markings indicating the volume of liquid inside them.
This allows for a more precise measurement of the solution than simply eyeballing it and pouring it into the test tube.
Additionally, a graduated cylinder reduces the risk of spills, which can lead to inaccurate measurements and waste of resources. Furthermore, it allows for consistent measurements every time the experiment is repeated.
In conclusion, the use of a graduated cylinder is essential when measuring 2 ml of solution for a lab experiment. It allows for accurate, precise, and consistent measurements, and also reduces the risk of spills and waste of resources.
Therefore, the use of a graduated cylinder to measure 2 ml of the solution instead of pouring the solution directly into the test tube is necessary to ensure accurate and precise measurements and reduce the risk of spills and waste of resources.
To know more about the graduated cylinders, refer here:
https://brainly.com/question/18948497#
#SPJ11
how many moles of o2 will be released if a liter of blood containing 45 g of hemoglobin is transferred from 60 torr, ph 7.6 to 20 torr, ph 7.2? hemoglobin has a molecular weight of 68,000.
Answer: Approximately 0.00033 moles of oxygen will be released from one liter of blood containing 45 grams of hemoglobin when it is transferred from 60 torr, pH 7.6, to 20 torr, pH 7.2.
First of all, the amount of hemoglobin in the given amount of blood has to be determined using the given data: Amount of hemoglobin in 1 L of blood = 45 g, Hemoglobin's molecular weight is 68,000 g/mol. : Number of moles of hemoglobin = 45/68000 = 0.000662 moles. After that, use the fact that the partial pressure of oxygen is related to the amount of dissolved oxygen, given the oxygen-hemoglobin equilibrium equation.
The formula for dissolved oxygen can be expressed as: Dissolved O2 = PO2 x solubility of O2PO2 = Partial pressure of oxygen in blood = 60 torr (initial) and 20 torr (final). Solubility of oxygen in blood can be determined from the table, which gives solubility as 0.0031 mol/L torr at 37°C.
The calculation of dissolved oxygen under initial and final conditions is as follows:Initial dissolved oxygen = 60 torr × 0.0031 mol/L torr = 0.186 mol/L Final dissolved oxygen = 20 torr × 0.0031 mol/L torr = 0.062 mol/L Thus, the amount of dissolved oxygen that has been released is the difference between the initial and final dissolved oxygen:Amount of dissolved oxygen released = initial dissolved oxygen - final dissolved oxygen= 0.186 - 0.062 = 0.124 mol/L
Amount of oxygen released = number of moles of hemoglobin × 4 × 0.124= 0.000662 × 4 × 0.124= 0.00033 moles
Know more about hemoglobin here:
https://brainly.com/question/15011428
#SPJ11
Give the empirical formula of a hydrocarbon that when 60.68 g is combusted in the presence of oxygen and produces 89.12 grams of CO2CO2 and 36.48 g of H2OH2O.
Write the formula with the atoms in the order CxHyOz. You can ignore the charge and phase.
Explanation :
The empirical formula of a hydrocarbon is C3H8 when 60.68 g are combusted in the presence of oxygen and produce 89.12 g of CO2 and 36.48 g of H2O.
The empirical formula of a compound represents the simplest ratio of atoms present in a compound. We are given that a hydrocarbon is burned and is producing carbon dioxide and water.
Therefore, the following reaction takes place:
CxHy + O2 → CO2 + H2O
We are given the mass of the hydrocarbon and the products produced. We have to calculate the empirical formula of the compound using the following steps:
First,
We have to find the moles of CO2 and H2O produced.Using the molar mass of CO2 = 44 g/molNumber of moles of CO2 produced = 89.12/44 = 2.02 molUsing the molar mass of H2O = 18 g/molNumber of moles of H2O produced = 36.48/18 = 2.03 molSecondly,
We need to determine the number of moles of C and H atoms present in the compound.Thirdly,
We need to convert the number of moles of each element to whole numbers by dividing by the smallest number of moles.Number of moles of C/0.67 = 2.02/0.67 = 3 Number of moles of H/0.67 = 4.06/0.67 = 6Therefore, the empirical formula of the compound is C3H8.
To know more about the empirical formula https://brainly.com/question/14044066
#SPJ11
calculate the ka based on the following information for the following unknown acid, ha. the ph of a buffer system is 4.219. the buffer is composed of 2.43 moles of ha and 1.75 moles of naa dissolved into 1.92 l of solution.
Based on the given information about the acid, the acid dissociation constant, Ka of the unknown acid is 4.97 x 10⁻⁷.
What is the acid dissociation constant, Ka of the acid?To calculate the Ka of the unknown acid, we can use the Henderson-Hasselbalch equation:
pH = pKa + log([A-]/[HA])
where:
pH = 4.219 (given)
[A-] = concentration of the conjugate base (NaA)
[HA] = concentration of the acid (HA)
We can find the concentration of NaA and HA using the given information:
moles of HA = 2.43 mol
moles of NaA = 1.75 mol
total moles = 2.43 + 1.75
total moles = 4.18 mol
volume of solution = 1.92 L
[H+] = 10^(-pH)
[H+] = 6.87 x 10^(-5) M
[HA] = (moles of HA) / (volume of solution)
HA = 1.264 M
[NaA] = (moles of NaA) / (volume of solution) = 0.911 M
Using the equation for the dissociation of the acid:
HA + H2O ⇌ H3O+ + A-
Ka = ([H3O+][A-]) / [HA]
We can assume that the concentration of H3O+ is equal to the concentration of NaA, since the pH is closer to the pKa of the acid. Therefore:
Ka = ([NaA][H+]) / [HA]
Ka = [(0.911 M)(6.87 x 10^(-5) M)] / (1.264 M)
Ka = 4.97 x 10^(-7)
Learn more about acid dissociation constant, Ka at: https://brainly.com/question/9396848
#SPJ1
presented with two tubes: one tube with a buffered solution + acid and one tube with water + acid, how will you know which tube has the buffer and which tube does not have the buffer?
One tube has a buffered solution + acid and the other tube has water + acid. To decide whether or not the solution is buffered, a simple pH test can be done. An acid-base indicator can be used to determine the pH of each solution.
A buffered solution is defined as a solution that can withstand minor changes in pH upon the addition of small amounts of an acid or base.
Consider the following steps:
To both tubes, add a small amount of acid-base indicator. Determine the pH of each solution by observing the color change of the acid-base indicator when it is added to it. The pH of the solution is determined by the color of the acid-base indicator after it has been added to it. Compare the pH of the two solutions. The solution with the lower pH is likely to have a buffer, whereas the solution with the higher pH is unlikely to have a buffer. This is due to the fact that the addition of an acid to a buffered solution would result in a lower pH, whereas the addition of an acid to an unbuffered solution would result in a higher pH. To find out which tube has the buffer and which does not, one has to compare the pH of each solution.Learn more about buffer: https://brainly.com/question/9458699
#SPJ11
a mixture of three gases has a total pressure of 1,380 mmhg at 298 k. the mixture is analyzed and is found to contain 1.27 mol co2, 3.04 mol co, and 1.50 mol ar. what is the partial pressure of ar? multiple choice 0.258 atm 301 mmhg 356 mmhg 5,345 mmhg 8,020 mmhg
The partial pressure of Ar is 0.219 * 1,380 mmHg = 301 mmHg.
The partial pressure of a gas in a mixture is equal to the mole fraction of that gas times the total pressure of the mixture.
The mole fraction of Ar in this mixture is 1.50/6.81 = 0.219. Thus, the partial pressure of Ar is 0.219 * 1,380 mmHg = 301 mmHg.
The ideal gas law states that the pressure of a gas is directly proportional to its number of moles and inversely proportional to its volume.
This law is expressed in the equation PV = nRT, where P is the pressure, V is the volume, n is the number of moles, R is the ideal gas constant, and T is the temperature.
In a mixture of gases, each gas behaves independently according to the ideal gas law. Thus, the total pressure of the mixture is the sum of the partial pressures of each gas.
The partial pressure of a gas is equal to its mole fraction times the total pressure. The mole fraction of a gas is the number of moles of that gas divided by the total number of moles of all gases in the mixture.
In the example provided, the total pressure of the mixture is 1,380 mmHg, the number of moles of CO2 is 1.27, the number of moles of CO is 3.04, and the number of moles of Ar is 1.50.
The total number of moles of all gases in the mixture is 1.27 + 3.04 + 1.50 = 6.81. The mole fraction of Ar is 1.50/6.81 = 0.219. Thus, the partial pressure of Ar is 0.219 * 1,380 mmHg = 301 mmHg.
To know more about partial pressure refer here:
https://brainly.com/question/13199169#
#SPJ11
chemistry!!!!!!!!!!!!
Answer:
jdkdidieidiriidiriri
The girl was measuring the hallway the first part was 132 inches long the second part was 3 yards long how long is the Hallway in feet?? I don't know the answer it is on my homework and I have to finish it up so I won't fail please help
The length of the hallway is 20 feet. To calculate the length of the hallway in feet, we need to first convert the measurements to the same unit of measurement. Let's convert the second part from yards to inches, since the first part is already in inches:
3 yards = 3 x 36 inches = 108 inches
Now we can add the two lengths together:
Total length = 132 inches + 108 inches = 240 inches
Finally, we can convert the total length from inches to feet by dividing by 12:
Total length = 240 inches ÷ 12 = 20 feet
Therefore, the length of the hallway is 20 feet.
Learn more about hallway
https://brainly.com/question/16400635
#SPJ4
Full Question ;
The girl was measuring the hallway the first part was 132 inches long the second part was 3 yards long how long is the Hallway in feet??
which is true about the rate-limiting step in a reaction? select all that apply: it is the slowest step. it limits (or determines) the rate of the reaction. it does not influence the rate law. it is always the first step. g
The true statements about the rate-limiting step in a reaction are it is the slowest step and it limits (or determines) the rate of the reaction. Therefore, option A is correct.
The rate-limiting step is the step in a reaction that has the highest activation energy and therefore proceeds at the slowest rate. It sets the overall rate of the reaction because the other steps in the reaction cannot occur faster than the rate of the rate-limiting step.
However, the rate law of the reaction is determined by the slowest elementary step, which may or may not be the rate-limiting step.
The rate-limiting step is not always the first step in a reaction. It can be any step in the reaction mechanism.
To learn more about the rate-limiting step, follow the ;ink:
https://brainly.com/question/30676099
#SPJ12
How many grams of aluminum sulfate would be formed if 3.52 grams of aluminum completely reacted with H2SO4?
2Al + 3H2SO4 ---------------------> Al2(SO4)3 + 3H2
Taking into account the reaction stoichiometry, 22.29 grams of Al₂(SO₄)₃ are formed if 3.52 grams of aluminum completely reacted with H₂SO₄.
Reaction stoichiometryThe balanced reaction is:
2 Al + 3 H₂SO₄ → Al₂(SO₄)₃ + 3 H₂
By reaction stoichiometry (that is, the relationship between the amount of reagents and products in a chemical reaction), the following amounts of moles of each compound participate in the reaction:
Al: 2 molesH₂SO₄: 3 molesAl₂(SO₄)₃: 1 molH₂: 3 molesThe molar mass of the compounds is:
Al: 27 g/moleH₂SO₄: 98 g/moleAl₂(SO₄)₃: 342 g/moleH₂: 2 g/moleBy reaction stoichiometry, the following mass quantities of each compound participate in the reaction:
Al: 2 moles ×27 g/mole= 54 gramsH₂SO₄: 3 moles ×98 g/mole= 294 gramsAl₂(SO₄)₃: 1 mol ×342 g/mole= 342 gramsH₂: 3 moles ×2 g/mole= 6 gramsMass of Al₂(SO₄)₃ formedThe following rule of three can be applied: if by reaction stoichiometry 54 grams of Al form 342 grams of Al₂(SO₄)₃, 3.52 grams of Al form how much mass of Al₂(SO₄)₃?
mass of Al₂(SO₄)₃= (3.52 grams of Al× 342 grams of Al₂(SO₄)₃)÷ 54 grams of Al
mass of Al₂(SO₄)₃= 22.29 grams
Finally, 22.29 grams of Al₂(SO₄)₃ are formed.
Learn more about the reaction stoichiometry:
brainly.com/question/24741074
#SPJ1