Answer:
(A)
Explanation:
ITS A ok ok bye
During an experiment a student records the net horizontal force exerted on an object moving in a straight line along a horizontal frictionless track. The graph above shows the force as a function of time. Of the following, which is the best approximation of the magnitude of the change in momentum of the object between 0 s and 4 s? (A) 20 kg•m/s (B) 30 kg•m/s (C) 40 kg•m/s () The magnitude of the change in momentum
Answer:c 40kg
Explanation:
Answer:
B. 30 kg * m/s
Explanation:
college board answer
The first published controlled experiment was designed to
A.
disprove bacteria appearing spontaneously from broth
B.
prove that bacteria arise spontaneously from broth
C.
disprove maggots spontaneously arising from rotting meat
D.
disprove cell theory
The carbon cycle relies on producers and consumers to survive. What is the role of each in the carbon cycle?
Which of the following explanations is correct about the wave that travels through the medium?
A. The vibration that produced the wave must have been perpendicular to the direction of motion of the resulting wave, because the figure shows that the resulting wave is a longitudinal wave.
B. The vibration that produced the wave must have been perpendicular to the direction of motion of the resulting wave, because the figure shows that the resulting wave is a transverse wave.
C. The vibration that produced the wave must have been parallel to the direction of motion of the resulting wave, because the figure shows that the resulting wave is a longitudinal wave.
D. The vibration that produced the wave must have been parallel to the direction of motion of the resulting wave, because the figure shows that the resulting wave is a transverse wave.
Danielle took an iron nail and wrapped thin copper wire around it, then connected the ends of the copper wire to a battery. Which force or forces can Danielle's device produce?
Answer:
yes her device can produce
Explanation:
An electromagnetic force is produced by this setup.
The question suggests the construction of a solenoid with an iron core.I have attached an image. A solenoid has an iron core wrapped around by insulating wires. When the insulating wires are connected to a battery or a voltage source, current flows in the wire and travels through the wrapped region around the iron core. Now, this current produces a magnetic field inside the solenoid, directed along the axis of the solenoid. When the iron core comes under the influence of this magnetic field, it magnetizes and acts as a strong magnet and can produce magnetic force. The force generated through this process is called electromagnetic force.
When the battery is removed, the solenoid returns to its original state, which is it doesn't act as a magnet anymore. By the way, iron retains some magnetization.
Learn more about electromagnetic force:
https://brainly.com/question/13745767
A student is observing prokaryotic and eukaryotic cells. How can the student determine the difference in the two cells?
Answer:
Prokaryotes are single-celled organisms that do not have a nucleus or any membrane-bound organelles. Eukaryotes are single-celled or multi-celled organisms that do contain a nucleus and membrane-bound organelles
A dog sits on a flat surface. If the dog has a mass of 13 kg, what is the normal force acting on it?
85 N
13 N
127 N
41 N
Answer:
127
Explanation:
f(n)=mg
(13)*(9.81)
127.4N
What is the frequency of a wave with a period of 8s?
You matter .
Until you Multiply yerself by the speed of Light Squared.
Then you Energy.
Answer:
Hellow ❤️
.
.
Gooood Morning
Answer:
?
Explanation:
I thought we were talking about a Flashpoint or something?
What kind of energy does an electromagnet use to pick up metallic objects?
Answer:
Magnetic energy is used by an electromagnet to pick up metallic objects
Explanation:
An electromagnet generates its own magnetic field in presence of electric current.
As an electric current is induced in an electromagnet , it magnetic dipole arrange themselves in order to behave as a magnet and hence generate magnetic field with a proper north and south. This leads to attraction of metallic object.
Hence, it can be said that Magnetic energy is used by an electromagnet to pick up metallic objects
A block of density 8.9g/cm³ measures 5cm by 2cm, Given that the force of gravity is 10N/kg. Determine the maximum pressure
Answer:
Maximum pressure = 4450 N/m²
Explanation:
We'll begin by calculating the volume of the block. This can be obtained as follow:
Volume (V) = 5 cm × 3 cm × 2 cm
V = 30 cm³
Next, we shall determine the mass of the block. This can be obtained as follow:
Density = 8.9 g/cm³
Volume = 30 cm³
Mass =?
Density = mass /volume
8.9 = mass / 30
Cross multiply
Mass = 8.9 × 30
Mass = 267 g
Next, we shall covert 267 g to Kg.
1000 g = 1 Kg
Therefore,
267 g = 267 g × 1 Kg / 1000
267 g = 0.267 Kg
Thus, the mass of the block is 0.267 Kg
Next, we shall determine the force.
Force of gravity (g) = 10 N/Kg
Mass (m) = 0.267 Kg
Force (F) =?
F = mg
F = 0.267 × 20
F = 2.67 N
Next, we shall determine the minimum area since we are trying to obtain the maximum pressure. This can be obtained as follow:
Minimum area = 3 cm × 2 cm
Covert each measurement to metre (m) by dividing each measurement by 100
Minimum area = 0.03 m × 0.02 m
Minimum area = 0.0006 m²
Finally, we shall determine the maximum pressure. This can be obtained as follow:
Force (F) = 2.67 N
Minimum area = 0.0006 m²
Maximum pressure =?
Maximum pressure = Force /minimum area
Maximum pressure = 2.67 / 0.0006
Maximum pressure = 4450 N/m²
Fast food meals are typically high in all except 1 fat 2 calories 3 sodium 4 fiber
Answer: they are high in all except fiber
If a car travels 30 miles in 5 hours, how many miles per hour is the car traveling?
((Please help I need this question in no less than 20 minutes!!!))
Answer:
6 mph
Explanation:
30 miles/5 hours = 6 mph
Fusion produces less radioactivity than fission.
True or false
Answer:
False
Explanation:
Fusion doesn't produce more.
Answer those 2 questions.
What factors affect Kinetic Energy? a. Mass and Height b. Velocity and Time C. Mass and Velocity d. Mass and Time
What factors affect Potential Energy? a. Mass and Height b. Velocity and Time c. Mass and Velocity d. Mass and Time
Answer:
Q1: c
Q2: a
Explanation:
you can tell the factors by looking at the formulas for kinetic and potential energy
for question 1 look at the formula for kinetic energy
[tex]KE=\frac{1}{2} mv^{2}[/tex]
the variables needed in order to calculate an object's kinetic energy are mass and velocity.
hence, when mass and velocity changes, kinetic energy changes, showing that mass and velocity are the factors affecting kinetic energy
same thing for the second question
[tex]PE = mgh[/tex]
as g (acceleration due to gravity) is considered constant (10 [tex]m/s^{2}[/tex] ) it will not be considered as a factor
and thus, the factors affecting potential energy are mass and height
what is the most dense type of stars?
Answer:
A neutron star is the most intensely dense object in all the universe. Of course, the argument can be made that a black hole is the most dense, but considering that a black hole is technically beyond the event horizon, it is neutron stars that get the top spot for the being the ‘most dense’.
Explanation:
:) please mark me as brainliest, thanks
True or False? Index Fossils are used to help constrain the relative age of the rocks in an area?
what must happen in order for a metaphoric rock to be transformed into a igneous rock
Answer:
If the newly formed metamorphic rock continues to heat, it can eventually melt and become molten (magma). When the molten rock cools it forms an igneous rock.
Explanation:
Function: y = x2 + 5x - 7
Vertex:(
Solutions:(
and
Answer:=7x−7
Explanation:
=2x+5x+−7
=(2x+5x)+(−7)
=7x+−7
Pedro is planning to model how changes in weather affect evaporation from lakes. For his first experiment, he wants to test how humidity affects the evaporation rate. He places one beaker with 300 mL of water in a dry area, and he places another beaker with 300 mL of water near a humidifier. Which of the following variables does Pedro need to control during his experiment?
The aim of the experimental model is to test the effect of humidity (changes in weather) on evaporation (rates) from lakes
The control variables in an experiment are the variables that the experimenter intends to keep constant always so as to limit their effect on the measurements of the relationship between the dependent and the independent variable
Therefore in order to have a proper measurement of the effect of humidity on evaporation rate, other variables such as temperature, and the volume of the water in the experiment investigations which affect evaporation rate by the provision of heat, (temperature) and their heat capacity, (the volume and therefore, mass of water) should be controlled
Learn more about controlled variables here;
https://brainly.com/question/2736198
Answer: B: Volume of water and temperature
Explanation:
Just took the quiz
Find the acceleration of a body of mass 300g being acted upon by a force of 6N.
Please show the working
Answer:
20m/s^2
Explanation:
A student is blowing against the mouthpiece of a 668mm flute (open at both ends) causing it to resonate. (The air inside and outside the flute is 24.5°C)
1) what is the speed of the sound in the flute?
2) what is the fundamental frequency of the note produced?
3) what is the wavelength of the sound wave?
Answer:
a) v = 345.5 m / s, b) f = 183.8 Hz, c) λ = 1,336 m
Explanation:
a) the speed of sound depends on the density of the medium and this depends on the temperature, therefore
v = [tex]v_o \ \sqrt{1+ \frac{T}{273} }[/tex]
where v₀ is the speed of sound at 0ºC v₀ = 331 m / s
v = 331 [tex]\sqrt{1 + \frac{24.5}{273} }[/tex]
v = 345.5 m / s
c) In the exercise they indicate that the flute is a tube with the two ends open, so that at each end there is a belly, the resonance is
λ / 2 = L
λ = 2L
λ = 2 0.668
λ = 1,336 m
b) let's apply the relationship between speed, wavelength and frequency
v = λ f
f = v /λ
f = 345.5 / 1.336
f = 183.8 Hz
Julie ran the 50-meter dash in 20 seconds. What was her speed?
plz answer ASAP dont give links to answer please
Answer:
50/20 = ans
Explanation:
you tube - superio s
An object travels a distance d with acceleration a over a period of time t according to the equation: d = at² After 2.3 seconds with an acceleration of 9.8 m/s2, how far does an object travel (rounding the answer to two significant figures)?
Answer:
A 26m
Explanation:
firstly the answer will not be part c as distance unit will be meters (m)
next, substitute the values of a and t as shown
[tex]\frac{1}{2} (9.8)(2.3)^2 = 25.921[/tex]
the answer rounded off to 2 significant figures will be hence 26m
Ingrid says that a red ball of clay appears red because the clay reflects red wavelengths. Simon says that the clay appears red because it allows red wavelengths to pass through it.
Which statement best explains who is correct?
Ingrid is correct. The clay appears red because it reflects red wavelengths.
Ingrid is correct. The clay appears red because it is a type of matter.
Simon is correct. The clay appears red because it allows red wavelengths to pass through it.
Simon is correct. The clay appears red because it is a solid.
Answer: (A) Ingrid is incorrect. The clay appears red because it reflects red wavelengths.
Explanation:
Edge 2021
Ingrid is correct. The clay appears red because it reflects red wavelengths.
Hence option A is correct.
What is wave ?Wave is is a disturbance in a medium that carries energy as well as momentum . wave is characterized by amplitude, wavelength and phase. Amplitude is the greatest distance that the particles are vibrating. especially a sound or radio wave, moves up and down. Amplitude is a measure of loudness of a sound wave. More amplitude means more loud is the sound wave.
Wavelength is the distance between two points on the wave which are in same phase. Phase is the position of a wave at a point at time t on a waveform.
There are two types of the wave longitudinal wave and transverse wave.
Longitudinal wave : in which, vibration of the medium (particle) is parallel to propagation of the wave. Sound wave is a longitudinal wave. Transverse wave : in which, vibration of the medium (particle) is perpendicular to propagation of the wave. Light wave is a Transverse wave.
Ingrid says that a red ball of clay appears red because the clay reflects red wavelengths. this statement is true.
Hence option A is correct.
To know more about absorption :
https://brainly.com/question/3080788
#SPJ7.
Write your question here (Keep it simple and clear to get the best answer) a car accelerates uniformly from an initial velocity of 10m/s at 2m/s squre for 4s.What is the average velocity
Answer:
Average velocity = 18 m/s
Explanation:
Given the following data;
Initial velocity = 10m/s
Acceleration = 2m/s²
Time = 4 seconds
To find the average velocity, we would use the first equation of motion;
[tex] V = U + at[/tex]
Where;
V is the final velocity.
U is the initial velocity.
a is the acceleration.
t is the time measured in seconds.
Substituting into the equation, we have;
V = u + at
V = 10 + 2*4
V = 10 + 8
V = 18 m/s
HELP ME PLEASEeeeeèeeeee
9514 1404 393
Answer:
5) 0.64Ω
6) 0.16 W
Explanation:
Put the given numbers into the given formula and do the arithmetic.
5)
[tex]\text{ohms}=\dfrac{\text{volts}}{\text{amps}}=\dfrac{0.32\text{ V}}{0.50\text{ A}}=\boxed{0.64\ \Omega}}[/tex]
__
6)
[tex]\text{watts}=\text{volts}\times\text{amps}=(0.32\text{ V})\times(0.50\text{ A})=\boxed{0.16\text{ W}}[/tex]
Answer:
just ok02
#CARRYONLEARNING
what is the name often given to the force exerted by the first object on a second object
Find the average acceleration of a northbound subway train that slows down from 12 m/s to 9.6 m/s in 0.8 seconds.
Answer:
[tex]a=-3\ m/s^2[/tex]
Explanation:
Given that,
Initial speed of a train, u = 12 m/s
Final speed of a train, v = 9.6 m/s
Time taken, t = 0.8 s
We need to find the average acceleration of the train. We know that the rate of change of velocity is equal to acceleration. So,
[tex]a=\dfrac{v-u}{t}\\\\a=\dfrac{9.6-12}{0.8}\\\\a=-3\ m/s^2[/tex]
So, the average acceleration of the train is equal to [tex]-3\ m/s^2[/tex].
Which is one use of lasers
A. reproducing images to make them clearer
B. Producing a magnified image of the moon
C. Cutting an iron bar into two pieces
D. Making a leaf appear larger so it’s veins are visible
Answer:
c
Explanation:
because what else can the laser be used for