Dimercaprol (HSCH2CHSHCH2OH) was developed during World War I as an antidote to arsenic-based poison gas and is used today to treat heavy-metal poisoning. It binds the toxic element and carries it out of the body. (a) If each molecule binds one arsenic (As) atom, how many atoms of As could be removed by 515 mg of dimercaprol
Answer:
2.50x10²¹ atoms
Explanation:
First we convert the given mass of dimercaprol to moles, to do so we calculate its molar mass:
Molar Mass of HSCH₂CHSHCH₂OH = (Molar Mass of C)*3 + (Molar Mass of H)*8 + (Molar Mass of S)*2 + Molar Mass of O = 124.227 g/mol515 mg equal 0.515 g
0.515 g ÷ 124.227 g/mol = 4.146 x 10⁻³ molAs one dimercaprol molecule binds to one As atom, one mol of dimercaprol reacts with one mol of As.
So we convert those 4.146 x 10⁻³ mol of As to atoms, using Avogadro's number:
4.146 x 10⁻³ mol * 6.023x10²³ atoms/mol = 2.50x10²¹ atomsWhen is a thunderstorm most intense
A mature stage
B dissipating stage
C wage stage
D cumulus stage
Answer:
rjdudhjwjwjiwiwiwjshdhjwiaishhw
Rotation about C-C single bonds allows a compound to adopt a variety of _____________. conformations configurations formations isomers projections are often used to draw the various conformations of a compound. conformations are lower in energy, while conformations are higher in energy. The difference in energy between staggered and eclipsed conformations of ethane is referred to as strain. strain occurs in cycloalkanes when bond angles deviate from the preferred °. The conformation of cyclohexane has no torsional strain and very little angle strain. The term "ring flip" is used to describe the conversion of one conformation into the other. When a ring has one substituent the equilibrium will favor the chair conformation with the substituent in the position.
Answer:
Conformation
Explanation:
Conformation refers to "any of the spatial arrangements which the atoms in a molecule may adopt and freely convert between, especially by rotation about individual single bonds"(Oxford dictionary).
Carbon-Carbon single bonds are known to undergo rotations about its axis. These rotations leads to various conformations. The energy difference between conformations may be low or high depending on the structure of the molecule. The difference in energy between conformations determines a molecules's preferred conformation.
Which island is older Kauai or Maui
Answer:
Kauai
Explanation:
I look this up when I am doing math
What was the Copernican revolution?
Answer:
Explanation:
Copernicus proposed that the Earth is not the center of the solar system, and that the Sun is the center. It's called heliocentric. He wrote a book summarizing all his ideas called De Revolutionbus. The Copernican Revolution though, is when a majority of the people started taking his ideas seriously and a major shift happened in what people think about the solar system.
Answer:the discovery that the earth revolves around the sun
Explanation:
Take a close look at this diagram on the slide which form of government is represented by this diagram
Answer:
Confederation
☆
EDGE2022; Good Luck :3!!!!
If 20 ml of a 0.5 M sodium hydroxide solution is necessary to neutralize 40 ml of an acid solution, what is the concentration of the acid?
Answer: The concentration of the acid is 0.01 moles acid/0.040 L = 0.25 moles/L = 0.25 M
Explanation:
Balanced Equation:
H2O2-
H2 + O2
2 H2O2 - 2 H2O+O2 - Balanced Equation and its a decomposition reaction.
Convert 0.859 mg to cg.
Help me plz :(
Answer:
0.0859
Explanation:
How many grams of KCl are produced if 25g of KCIO3 decompose?
2KCIO3
2KCI
+
302
Answer:
15 g
Explanation:
The reaction that takes place is:
2KCIO₃ → 2KCI + 3O₂First we convert 25 g of KCIO₃ to moles, using its molar mass:
25 g ÷ 122.55 g/mol = 0.204 mol KCIO₃Then we convert KCIO₃ moles to KCl moles, using the stoichiometric coefficients:
0.204 mol KCIO₃ * [tex]\frac{2molKCl}{2molKClO_3}[/tex] = 0.204 mol KClFinally we convert KCl moles to grams, using the molar mass of KCl:
0.204 mol KCl * 74.55 g/mol = 15.2 gStudents investigate forces and how they affect objects. They use a small car and wooden blocks to carry out their investigation
They pushed the cart and blocks 10 times, using the same amount of force. Each time, they added 5 more blocks to the wagon
They measured how far the cart moves each time. They made a line graph to show their results. What will their graph show?
The distance the cart moves decreases as the number of blocks in it increases
As the number of blocks in the cart increases, the distance it moves stays the same.
The distance the cart moves is not related to the number of blocks in it
The distance the cart moves increases as the number of blocks in the cart increases
Answer:
increase the number of blocks
increase the number of students pulling the cart
increase the number of blocks and increase the number of students pulling the cart
decrease the number of blocks
decrease the number of students pulling the cart
decrease the number of blocks and decrease the number of students pulling the cart
(ANSWER CHOICES)
Explanation:
What is the correct ionic charge for a barium atom
Perform each conversion
5.88 dL to liters
Answer:
5.88 dL = 0.588 litre
Explanation:
We need to find a conversion from 5.88 dL to liters.
We know that the conversion is as follows :
1 deciliter = 0.1 litre
To find 5.88 dL to liters, we use the unitary method. So,
5.88 dL= (0.1×5.88) litre
5.88 dL = 0.588 litre
So, there are 0.588 liters in 5.88 dL.
The reaction between ethyl alcohol and ethyl bromide forms diethyl ether via a substitution reaction, followed by deprotonation. Identify the electrophilic and nucleophilic site of the addition reaction.
Answer:
Explanation:
According to the attached mechanism, we have a Sn1 reaction. The diethyl ether formed is because we have a nucleophilic site and an electrophilic site. Now which one is?.
If you see the mechanism below, you can see that the -OH has a lone pair of electrons. This lone pair attacks the carbon that is attached to the bromine. This attack, makes the ethyl alcohol the nucleophyle, and the ethyl bromide, which have the leaving group (The bromine) the electrophyle.
You can see the mechanism below to understand the formation of this product.
Hope this helps
Which color marks the places on the map where the continental shelf is most likely found?
Answer:
blue
Explanation:
Use the Henderson-Hasselbalch equation, eq. (3), to calculate the pH expected for a buffer solution prepared from this acid and its conjugate base, assuming: the mass of the weak acid is 0.2 g and the mass of the conjugate base is 0.2 g will be added to 25 mL of water. Also assume the molar mass of the weak acid is 234 and its conjugate base is the sodium salt.
Answer:
[tex]pH=4.56[/tex]
Explanation:
Hello there!
In this case, given the Henderson-Hasselbach equation, it is possible for us to compute the pH by firstly computing the concentration of the acid and the conjugate base; for this purpose we assume that the volume of the total solution is 0.025 L and the molar mass of the sodium base is 234 - 1 + 23 = 256 g/mol as one H is replaced by the Na:
[tex]n_{acid}=\frac{0.2g}{234g/mol}=0.000855mol\\\\n_{base}= \frac{0.2g}{256g/mol}=0.000781mol[/tex]
And the concentrations are:
[tex][acid]=0.000855mol/0.025L=0.0342M[/tex]
[tex][base]=0.000781mol/0.025L=0.0312M[/tex]
Then, considering that the Ka of this acid is 2.5x10⁻⁵, we obtain for the pH:
[tex]pH=-log(2.5x10^{-5})+log(\frac{0.0312M}{0.0342M} )\\\\pH=4.60-0.04\\\\pH=4.56[/tex]
Best regards!
What is the molar mass of AuCl3?
Explanation:
Molar mass is the the mass of one mole of a substance and is expressed in g/mol. Gold atomic mass is 196.96657, chlorine has 35.453. Hence, molar mass of AuCl3= atomic number of Gold + atomic mass of chlorine × (number of atoms of chlorine in AuCl3). Molar mass of AuCl3 = 196.96657 + (35.453 × 3).
Is oxygen with 10 total electrons an atom or an ion
Answer:
Since two extra electrons are added, it is denoted by O2- hence it's an ion.
Each element has a unique name. How else can
an element be represented?
A. by its mass
B. by its state of matter
C. by its chemical symbol
D. by an identification number
Answer:
C. by its chemical Symbol
Hope this helps!
wright it in 500 words Submit your persuasive essay about nuclear power. Remember to proofread your work before submitting.
Answer:
Explanation:
Introduction Paragraph. Hook. Background Points. Thesis Statement.( done)
Body Paragraph. Topic Sentence. Supporting fact 1. Supporting fact 2. Transition Sentence.(done)
Conclusion Paragraph. Re-statement of Thesis. Summary of Main Point. Challenge to the Reader.( done)
it's science pls help
Answer:
1.5
Explanation:
doesn't have to be a detailed explaination
Given the following reaction:
2 Al + 2 KOH + 4 H2SO4 + 22 H2O --> 3 H2 + 2KAl(SO4)2•12H2O
If you start with 13.4 mL of 8.0M sulfuric acid, what is the theoretical yield of alum?
Answer:
it is 1e-0
Explanation:
How many moles
are equal to
4.11x1023
molecules of
CO2?
Answer:
1.47
Explanation:
1) Avogadro number is: 6.022*10²³ molecules per mol;
2) if 6.022*10²³ molecules are in 1 mol, then 4.11*10²³ molecules are in
x=6.022*10²³ / 4.11*10²³=6.022/4.11≈1.47 moles.
A wave is a ______ that carries ______ from one place to another?.
Answer: disruption and energy
Explanation:
Answer: disturbance; energy
Explanation:
Salts when dissolved in water releases
Water molecules pull the sodium and chloride ions apart, breaking the ionic bond that help them together.After the salt compounds are pulled apart ,the sodium and chloride atoms are surrounded by water molecules,as this diagram shows.Once this happens,the salt is desolved,resulting in a homogeneous solution
12. What power do you start when using a microscope?
Extra high power
Low power
Medium Power
d. High Power
moralenses
When focusing on a slide, ALWAYS start with either the 4X or 10X objective. Once you have the object in focus, then switch to the next higher power objective. Re-focus on the image and then switch to the next highest power.
orange and strawberries prevent hair...
A. loss
B. growth
C. breakage
D. color
Answer:
A. Loss
Explanation:
Vitiman C can boost hair growth
I need the blanks filled. This is Comp chem and I need it fast.
A sample of gas in a cylinder as in the example in Part A has an initial volume of 56.0 L , and you have determined that it contains 1.80 moles of gas. The next day you notice that some of the gas has leaked out. The pressure and temperature remain the same, but the volume has changed to 14.0 L . How many moles of gas (n2) remain in the cylinder
Answer: The moles of gas that remain in the cylinder are 0.45
Explanation:
According to the Avogadro's law, the volume of gas is directly proportional to the number of moles of gas at same pressure and temperature. That means,
[tex]V\propto n[/tex]
or [tex]\frac{V_1}{n_1}=\frac{V_2}{n_2}[/tex]
where,
[tex]V_1[/tex] = initial volume of gas = 56.0 L
[tex]V_2[/tex] = final volume of gas = 14.0 L
[tex]n_1[/tex] = initial moles of gas = 1.80
[tex]n_2[/tex] = final moles of gas = ?
Putting the values , we get:
[tex]\frac{56.0}{1.80}=\frac{14.0}{n_2}[/tex]
[tex]n_2=0.45[/tex]
The moles of gas that remain in the cylinder are 0.45
) An organic chemistry lab book gives the following solubility data for oxalic acid 9.5g/100ml water 23.7g/100ml ethanol 16.9g/100ml ether (a) A 14CL student has 40 g of oxalic acid in 1000ml of water and wishes to extracted into an organic solvent for further experiments. Which solvent should the student use for the extraction
Answer:
Ethanol
Explanation:
Solvent extraction is the process in which a compound transfers from one solvent to another owing to the difference in solubility or distribution coefficient between these two solvents(Science Direct).
We have to remember that oxalic acid will be extracted better into a solvent in which it is more soluble. From the data given; oxalic acid is more soluble in ethanol than in ether.
This simply means that ethanol is a better solvent for extracting oxalic acid from water when compared to ether.