WILL MARK BRAINLIEST QUESTION IS IN THE PHOTO

The correct statement that compares the value of the 6 in 26.495 and 17.64 is the value of the 6 in 26.495 is 10 times the value of the 6 in 17.64. Therefore, the correct option is D.

This is because the value of a digit is determined by its place in the number. In 26.495, the 6 is in the tenths place, which means it represents 6/10 or 0.6. In 17.64, the 6 is in the hundredths place, which means it represents 6/100 or 0.06. Therefore, the value of the 6 in 26.495 is 0.6 and the value of the 6 in 17.64 is 0.06.

To compare these values, we can divide the value of the 6 in 26.495 by the value of the 6 in 17.64. This gives us 0.6/0.06 = 10. Therefore, the value of the 6 in 26.495 is 10 times greater than the value of the 6 in 17.64 which corresponds to option D.

Learn more about Digit:

https://brainly.com/question/2041524

#SPJ11

The number of times of rolling a 5 or a 6 in the fair die is 24

From the question, we have the following parameters that can be used in our computation:

Fair 6-sided die = 72 times

In a 6-sided die, we have

P(5 or 6) = 2/6

When evaluated, we have

P(5 or 6) = 1/3

So, when the die is rolled 72 times, we have

Expected value = 1/3 * 72

Evaluate

Expected value = 24

Hence, the number of times is 24

Read more about expected value at

brainly.com/question/15858152

#SPJ1

The set of dimensions for the largest box is: 4 in x 4 in x 3.8 in.

We know that the smallest box must hold 8 fluid ounces or 15 in³ of soup. Let's assume the dimensions of the smallest box to be x, y, and z.

Then, we have:

[tex]x * y * z = 15[/tex]

Now, the largest box will be a dilation of the smallest box using a scale factor of 2. This means that every dimension of the smallest box will be multiplied by 2 to get the dimensions of the largest box.

So, the dimensions of the largest box will be 2x, 2y, and 2z.

Now, we need to find the dimensions of the smallest box. We can start by solving the equation x * y * z = 15 for one of the variables, say z:

[tex]z = 15 / (x * y)[/tex]

Substituting this value of z in the expression for the dimensions of the largest box, we get:

[tex]2x * 2y * (15 / (x * y))[/tex]

Simplifying this expression, we get:

[tex]4 * 15 = 60[/tex]

So, the dimensions of the largest box are approximately 4 in by 4 in by 3.8 in (rounded to the nearest tenth).

Therefore, the set of dimensions for the largest box is: 4 in x 4 in x 3.8 in.

Learn about Set of Dimensions at

brainly.com/question/23581904

#SPJ4

If that segment KL is parallel to segment MN and that segment KN bisects segment ML, then segment KO is congruent to segment NO.

To prove that segment KO is congruent to segment NO, we need to show that triangle KNO is an isosceles triangle, with KO ≅ NO.

From the given information, we know that KL is parallel to MN, which means that angle KLN is congruent to angle MNL (corresponding angles). Also, KN bisects segment ML, which means that angle KNO is congruent to angle NMO (angle bisector theorem).

Therefore, we have:

angle KNO = angle NMO

angle KLN = angle MNL

Adding these two equations gives us:

angle KNO + angle KLN = angle NMO + angle MNL

But angle KLN + angle NMO + angle MNL = 180 degrees (as they form a straight line). So we can substitute this into the equation:

angle KNO + 180 degrees = 180 degrees

Simplifying, we get:

angle KNO = 0 degrees

This means that KO and NO are on the same line, so they must be congruent. Therefore, we have proven that segment KO is congruent to segment NO.

To learn more about congruent triangle, click on below link:

brainly.com/question/15064982

#SPJ11

Answer:

$1680

Step-by-step explanation:

PV = $1200

i = 5%

n = 8

Simple interest formula:

FV = PV (1 + i × n)

FV = 1200 (1 + 5% x 8)

FV = $1680

Your answer will depend on the measurements you obtain from the parallelograms.

To determine the scale factor of the dilation between the green parallelogram and the black parallelogram, follow these steps:
1. Choose corresponding sides of both parallelograms (e.g., the base or the height).
2. Measure the length of the chosen side in the green parallelogram and the same side in the black parallelogram.
3. Divide the length of the side in the green parallelogram by the length of the corresponding side in the black parallelogram.
The result will be the scale factor of the dilation. Compare the result with the given options:
A) 1/3
B) 1/2
C) 2
Your answer will depend on the measurements you obtain from the parallelograms.

Learn more about dilation here, https://brainly.com/question/3457976

#SPJ11

The probability of drawing a yellow marble on the next draw is 13/48, which is option A, 13%.

The probability of drawing a yellow marble in the next draw depends on whether the drawing process is with or without replacement.

If the drawing process is with replacement, meaning that the marble is put back into the bag after each draw, then the probability of drawing a yellow marble remains the same at 13/48.

If the drawing process is without replacement, meaning that the marble is not put back into the bag after each draw, then the probability of drawing a yellow marble changes. After 48 draws, there are 35 white marbles and 13 yellow marbles left in the bag.

Therefore, the correct answer is A) 13%.

Learn more about probability at: https://brainly.com/question/13604758

#SPJ1

The derivative of the given function is:

f'(t) = 12t^2 + 4

Setting f'(t) = 0 to find critical points, we get:

12t^2 + 4 = 0

t^2 = -1/3

This equation has no real solutions, which means there are no critical points on the interval [-2, 2]. Since the interval is closed and bounded, the function attains its maximum and minimum values at the endpoints of the interval.

We can find the values of the function at the endpoints:

f(-2) = -24

f(2) = 24

Therefore, the function has an absolute maximum of 24 at t = 2 and an absolute minimum of -24 at t = -2. There are no relative extrema.

Visit here to learn more about derivative brainly.com/question/30365299

#SPJ11

Answer:

1.03x 10^{10}

Step-by-step explanation:

No explanation, simple calculator calculation does the job.

By subtracting this from the dividend, the next step would be:

[tex](2x^4 - 3x^3 - 3x^2 + 7x - 3) - (-5x^3 + 10x^2 - 5x) = 2x^4 + 2x^3 - 13x^2 + 12x - 3[/tex]

This error occurs because he forgets to distribute the -2 in [tex]-2(x^2 - 2x + 1)[/tex]when subtracting from [tex]2x^4[/tex]. This leads to a mistake in the next step when he subtracts [tex]x^3 - 2x^2[/tex] from [tex]x^3 - 5x^2[/tex] to get [tex]-3x^2[/tex]instead of [tex]-3x^2 + 6x[/tex]. This error then leads to the incorrect constant term in the quotient.

Therefore, the error Randy makes is a subtraction error in the first step of the long division. It is important to pay attention to signs and distribute coefficients correctly when performing long division with polynomials.

To know more about remainder refer here:

https://brainly.com/question/30302805#

#SPJ11

Answer: A. x + 2

Step-by-step explanation:

Edge 2023

The surface area of revolution of C about the x-axis is π/27 (81^(3/2) - 1) or approximately 478.48 units².

To find the surface area of revolution of C about the x-axis, we can use the formula:

Surface area = ∫2πy ds

where y is the function that defines the curve C, and ds is an element of arc length along the curve.

We can express ds in terms of dx as follows:

ds = √(1 + (dy/dx)²) dx

where dy/dx is the derivative of y with respect to x.

For the curve C, we have:

y = 3x³

dy/dx = 9x²

Substituting these into the expression for ds, we get:

ds = √(1 + (9x²)²) dx

= √(1 + 81x⁴) dx

Substituting y and ds into the formula for surface area, we get:

Surface area = ∫₂πy √(1 + (dy/dx)²) dx

= ∫₀³ 2π(3x³) √(1 + 81x⁴) dx

This integral can be evaluated using substitution:

Let u = 1 + 81x⁴

Then du/dx = 324x³

And dx = du/324x³

Substituting these into the integral, we get:

Surface area = ∫₁₀³ 2π(3x³) √(1 + 81x⁴) dx

= 2π/108 ∫₁₀³ (3x³) √u du

= π/54 ∫₁₀³ u^(1/2) du

= π/54 (2/3) u^(3/2) | from 1 to 81

= π/81 (2/3)(81^(3/2) - 1)

= π/27 (81^(3/2) - 1)

Therefore, To find the surface area of revolution of C about the x-axis, we can use the formula:

Surface area = ∫2πy ds

where y is the function that defines the curve C, and ds is an element of arc length along the curve.

We can express ds in terms of dx as follows:

ds = √(1 + (dy/dx)²) dx

where dy/dx is the derivative of y with respect to x.

For the curve C, we have:

y = 3x³

dy/dx = 9x²

Substituting these into the expression for ds, we get:

ds = √(1 + (9x²)²) dx

= √(1 + 81x⁴) dx

Substituting y and ds into the formula for surface area, we get:

Surface area = ∫₂πy √(1 + (dy/dx)²) dx

= ∫₀³ 2π(3x³) √(1 + 81x⁴) dx

This integral can be evaluated using substitution:

Let u = 1 + 81x⁴

Then du/dx = 324x³

And dx = du/324x³

Substituting these into the integral, we get:

Surface area = ∫₁₀³ 2π(3x³) √(1 + 81x⁴) dx

= 2π/108 ∫₁₀³ (3x³) √u du

= π/54 ∫₁₀³ u^(1/2) du

= π/54 (2/3) u^(3/2) | from 1 to 81

= π/81 (2/3)(81^(3/2) - 1)

= π/27 (81^(3/2) - 1)

Therefore, the surface area of revolution of C about the x-axis is π/27 (81^(3/2) - 1) or approximately 478.48 units².

Learn more about surface area.

brainly.com/question/2728977

#SPJ11

The substitution (3x - 2)2 u = 3x - 2 transforms the indefinite integral da into none of the given options. It should result in the integral of the function being expressed in terms of u rather than x.

This substitution is an example of using a change of variables to simplify an integral by transforming it into a more manageable form. This can be particularly useful when dealing with complicated integrals that are difficult to solve by other methods. Additionally, using such transforms can often provide insight into the underlying structure of the problem being studied.
 Based on your question, it appears that you want to perform a substitution to transform the indefinite integral of "da" using the substitution (3x - 2)² u = 3x - 2. However, the given integral "da" doesn't seem to be correct or complete. Please provide the complete integral, and I will be happy to help you with the transformation using the given substitution.

To know more about  indefinite integral click here:

brainly.com/question/29133144

#SPJ11

Options A and D both give an area of 20 square inches

To find the correct dimensions of the parallelogram with an area of 20 square inches, you can use the formula for the area of a parallelogram: Area = base * height.

Given the options:

A. base = 3.06 in, height = 6.54 in
B. base = 6.22 in, height = 3.23 in
C. base = 2.57 in, height = 7.78 in
D. base = 4.00 in, height = 5.00 in

Check each option by plugging the base and height into the formula:

A. 3.06 * 6.54 ≈ 20.00
B. 6.22 * 3.23 ≈ 20.08
C. 2.57 * 7.78 ≈ 19.98
D. 4.00 * 5.00 = 20.00

Options A and D both give an area of 20 square inches. Since the question asks for dimensions to the nearest hundredth of an inch, option A (base = 3.06 in, height = 6.54 in) is more precise and is the correct answer.

To learn more about parallelogram

https://brainly.com/question/16495817

#SPJ11

It would cost $735 to buy a cover for the pool at $0.30 per square foot

From the complete question (see attachment), we have the following parameters that can be used in our computation:

Unit rate = $0.30 per square foot

Dimensions = 10 inches by 20 inches

Scale = 2 inches : 7 feet

Using the above as a guide, we have the following:

Total cost = Unit rate * Area of pool

Where

Area of the pool = 10 inches * 20 inches

Using the scale, we have

Area of the pool = (10 * 7/2)* (20 * 7/2) square feet

Area of the pool = 2450 square feet

Substitute the known values in the above equation, so, we have the following representation

Total cost = $0.30 per square feet * 2450 square feet

This gives

Total cost = $735

Hence, it would cost $735 to buy a cover for the pool

Read more about unit rates at

https://brainly.com/question/4895463

#SPJ1

Complete question

The blueprint of a pool has a scale of 2 inches equals 7 feet. The scale drawing is shown below (see attachment)

How much would it cost to buy a cover for the pool that cost $0.30 per square foot

If it has a 15% yearly interest rate and the interest is compounded monthly and the card has $0 minimum payments for the first four years it is active. Therefore, Emma will owe approximately $529.27 in four years.

To calculate how much Emma will owe in four years, we need to use the compound interest formula: A = P (1 + r/n)^(n*t)

where:

A = the amount of money at the end of the investment period

P = the principal amount (the initial amount of money borrowed)

r = the annual interest rate (as a decimal)

n = the number of times the interest is compounded per year

t = the time period in years

In this case, the principal amount is $300, the annual interest rate is 15%, and the interest is compounded monthly (so n = 12). The time period is four years.

Plugging in the values, we get:

A = 300(1 + 0.15/12)^(12*4)

A ≈ $529.27

Therefore, Emma will owe approximately $529.27 in four years if she doesn't pay off her credit card until after college.

To learn more about “credit cards” refer to the https://brainly.com/question/26857829

#SPJ11

A triangular prism is a three-dimensional shape with two parallel triangular bases and three rectangular faces. In this case, the triangular bases have sides of 4 cm, 5 cm, and 5 cm, while the rectangular faces have a length of 10 cm and a height of 6 cm.

To find the volume of the prism, we can use the formula V = Bh, where B is the area of the base and h is the height. The area of a triangle can be found using the formula A = 1/2bh, where b is the base and h is the height.

So, for the triangular base of this prism, we have:

A = 1/2(4 cm)(3 cm) = 6 cm²

The height of the prism is 5 cm, so:

V = Bh = (6 cm²)(5 cm) = 30 cm³

Therefore, the volume of the prism is 30 cubic centimeters.

To find the surface area of the prism, we need to calculate the area of each face and add them up.

The two triangular faces each have an area of:

A = 1/2(4 cm)(5 cm) = 10 cm²

And the three rectangular faces each have an area of:

A = (10 cm)(6 cm) = 60 cm²

So, the total surface area is:

SA = 2(10 cm²) + 3(60 cm²) = 200 cm²

Therefore, the surface area of the prism is 200 square centimeters.

To know more about triangular prism refer here

https://brainly.com/question/24046619#

#SPJ11

The formula for d is d = (t * 21/4b² + 3b)/5

To make d the subject of the formula t=4b²/21(d-3b/5), we need to isolate d on one side of the equation and simplify.

First, let's simplify the right side of the equation by multiplying the fraction by the LCD of 5:

t = 4b²/21(d-3b/5)

t = (4b²/21d) * 5d - 3b

Now, we can isolate d by dividing both sides of the equation by the coefficient of d on the right side:

t/(4b²/21) = 5d - 3b

Simplifying the left side, we get:

t * 21/4b² = 5d - 3b

Adding 3b to both sides of the equation, we get:

t * 21/4b² + 3b = 5d

Finally, we can divide both sides by 5 to isolate d:

d = (t * 21/4b² + 3b)/5

Therefore, the formula for d is:

d = (t * 21/4b² + 3b)/5

In words, to find the value of d, we need to multiply the value of t by 21/4b², add 3b to the result, and divide the sum by 5.

Know more about formula here:

https://brainly.com/question/25741291

#SPJ11

To find the volume generated, we need to use the formula for volume of revolution. We are revolving the area bounded by the curve y=x, the line x=4 and the x-axis about the y-axis.

First, we need to find the limits of integration for x. The curve y=x intersects the line x=4 at y=4, so we integrate from x=0 to x=4.

Next, we need to find the radius of the rotation. The radius is the distance from the y-axis to the curve at each value of x. Since we are revolving about the y-axis, the radius is simply x.

Using the formula for volume of revolution, we get:

V = π∫(radius)^2 dx from 0 to 4

V = π∫x^2 dx from 0 to 4

V = π[x^3/3] from 0 to 4

V = π[(4^3/3) - (0^3/3)]

V = (64π/3)

Therefore, the volume generated when the area bounded by the curve y=x, the line x=4 and the x-axis is revolved about the y-axis is (64π/3).
To find the volume generated when the area bounded by the curve y=x^2, the line x=4, and the x-axis is revolved around the y-axis, we'll use the disk method. The formula for the disk method is:

Volume = π * ∫ [R(x)]^2 dx

Here, R(x) is the radius function and the integral is taken over the given interval on the x-axis. In this case, R(x) = x and the interval is from 0 to 4.

Volume = π * ∫ [x]^2 dx, with the integral from 0 to 4

Now, we'll evaluate the integral:

Volume = π * [ (1/3)x^3 ](0 to 4)
Volume = π * [ (1/3)(4)^3 - (1/3)(0)^3 ]
Volume = π * [ (1/3)(64) - 0 ]
Volume = π * [ (64/3) ]

So, the volume generated is (64/3)π cubic units.

Learn more about volume here: brainly.com/question/1578538

#SPJ11

Ramiro is correct that if all corresponding angles are equal then the triangle is said to be similar.

Triangles are said to be similar if any of the following is true:

1. All or any two of the corresponding angles are equal

2. All the corresponding sides are proportional to each other

3. One of the corresponding angles is equal and the adjoining corresponding sides are proportional.

Triangles are said to be congruent if any of the following is true:

1. All of the corresponding sides are equal

2. Two of the angles are equal and so is one of the corresponding sides of the triangle.

3. One of the corresponding angles is equal and the adjoining corresponding sides are also equal.

4. In a right-angled triangle, either the base or height and the hypotenuse are equal.

Since in the question, the criteria for the similar triangles is fulfilled then Ramiro is correct.

Learn more about Similar triangles:

https://brainly.com/question/29782809

#SPJ4

The dimensions that require the least amount of material are r = (10/π)^(1/3) cm for the radius and h = (10/π)^(1/3) cm for the height.

To minimize the amount of material used for making aluminum cups with a volume of 10 cubic centimeters, you will need to optimize the dimensions of the right circular cylinders.

Given the volume (V) is 10 cm³, the formula for the volume of a right circular cylinder is V = πr²h, where r is the radius and h is the height.

10 = πr²h

To minimize the material used, we want to minimize the surface area (SA) of the open cylinder, which is given by the formula SA = 2πrh + πr² (the first term represents the lateral surface and the second term the base).

Using the volume formula, we can find a relationship between r and h:

h = 10 / (πr²)

Now substitute this expression for h in the surface area formula:

SA(r) = 2πr(10 / (πr²)) + πr²
SA(r) = 20/r + πr²

To find the minimum surface area, differentiate SA(r) with respect to r and set the result equal to zero:

d(SA)/dr = -20/r² + 2πr

Now solve for r:

0 = -20/r² + 2πr
20/r² = 2πr
r³ = 10/π

Now take the cube root of both sides:

r = (10/π)^(1/3)

To find the height, substitute this value of r back into the expression for h:

h = 10 / (π((10/π)^(1/3))²)
h = (10/π)^(1/3)

The dimensions that require the least amount of material are r = (10/π)^(1/3) cm for the radius and h = (10/π)^(1/3) cm for the height.

To learn more about surface area, refer below:

https://brainly.com/question/29298005

#SPJ11

Answer: is approximately between 113.39 and 116.61
To calculate the 95% confidence interval for the students' average IQ score, we'll use the given information: sample size (n=150), sample mean (X=115), and sample standard deviation (s=10). We'll use the t-distribution since the population standard deviation is unknown.

First, we need to find the t-value for a 95% confidence interval with n-1 (149) degrees of freedom. Using a t-table or calculator, we find the t-value to be approximately 1.976.

Next, we'll calculate the standard error (SE) using the formula: SE = s/√n. In this case, SE = 10/√150 ≈ 0.816.

Now, we can find the margin of error (ME) using the formula: ME = t-value × SE. For this problem, ME = 1.976 × 0.816 ≈ 1.61.

Finally, to calculate the 95% confidence interval, we'll use the formula: X ± ME. Thus, the 95% confidence interval is 115 ± 1.61, which is approximately (113.39, 116.61).

So, the 95% confidence interval for the students' average IQ score is approximately between 113.39 and 116.61.

To know more about confidence interval:

https://brainly.com/question/15712887

#SPJ11

You need to pay $3,243.50 in property taxes.

The appraised value of the house after setting out the homestead exemption is $315,000 - $50,000 = $265,000.

To calculate the assets taxes, we need to multiply the appraised cost by means of the tax rate, which is 1.22% or 0.0122 as a decimal:

property taxes = $265,000 x zero.0122 = $3,243.50

Therefore, you have to pay $3,243.50 in property taxes.

It's far essential to factor in property taxes whilst thinking about the general price of purchasing a home and to recognize the method for applying for exemptions or appealing the appraised cost if necessary.

Learn more about  tax rate:-

https://brainly.com/question/25844719

#SPJ1

The pair of numbers  3/5 and -5/3,  -1/3 and 3 are perpendicular because two lines are perpendicular if and only if the product of their gradients is -1.

Each pair of numbers, we have to decide if lines with these gradients are perpendicular or not

Two lines are perpendicular if and only if the product of their gradients is -1.

For 5 and 1/5

The product is 1 which is not -1, so these are not perpendicular.

For 3/5 and -5/3

The product is -1 so these are perpendicular

For 1/4 and -1/4

The product is -1/16 so these are not perpendicular.

For -1/3 and 3

The product is  -1 so these are perpendicular

Hence, the pair of numbers  3/5 and -5/3,  -1/3 and 3 are perpendicular.

To learn more on slope of line click:

https://brainly.com/question/16180119

#SPJ1

Each game of skee ball requires 2 tokens and each game of pinball requires 2 tokens.

Let the number of tokens required for each game of skee ball be x and for each game of pinball be y.

From the given information, we can form two equations:

10x + 8y = 44    ... (1)

3x + 8y = 30      ... (2)

Multiplying equation (2) by 3, we get:

9x + 24y = 90     ... (3)

Subtracting equation (1) from equation (3), we get:

- x + 16y = 46

Solving for x, we get:

x = 16y - 46

Substituting this value of x in equation (2), we get:

3(16y - 46) + 8y = 30

Simplifying and solving for y, we get:

y = 2

Substituting this value of y in equation (1), we get:

10x + 8(2) = 44

Solving for x, we get:

x = 2

Therefore, each game of skee ball requires 2 tokens and each game of pinball requires 2 tokens.

To know more about tokens, visit:

https://brainly.com/question/14476366#

#SPJ11

The length of the trail is determined as 1.3 miles.

The length of the trail is calculated as follows;

The circumference of the circle is calculated as;

S = πd

where;

S = π x 2 ft

S = 2π ft

I revolution = 1 circumference = 2π ft

1 rev = 2π ft

1,100.5 rev = ?

= 1,100.5 rev/rev x 2π ft

= 6,914.65 ft

5280 ft -------> 1 mile

6,914.65 ft ------> ?

= 1.3 miles

Learn more about circumference of circle here: https://brainly.com/question/20489969

#SPJ1

Hi! I'd be happy to help you with your question about transformations and congruence. When Triangle ABC is reflected over the x-axis, the algebraic rule applied to the figure is:

Your answer: (x, y) → (x, -y)

This rule states that the x-coordinate remains the same, while the y-coordinate is multiplied by -1, resulting in a reflection over the x-axis. This transformation preserves congruence, as the size and shape of Triangle ABC remain the same, only its position changes.

The algebraic rule applied to the figure when Triangle ABC is reflected over the x-axis is (x,y) → (x,-y), where x represents the x-coordinate and y represents the y-coordinate. This is because reflecting a figure over the x-axis involves keeping the x-coordinate the same while changing the sign of the y-coordinate. This preserves the congruence of the original and reflected triangles.

To know more about congruence refer here

https://brainly.com/question/31992651#

#SPJ11

The cordinate points with x- and y-intercepts of the graph of a linear equation, 4x+ 8y = 20, are equals to the (5,0) and (0, 5/2).

We have an equation, 4x + 8y = 20 --(1) which is linear equation with two variables. We have to determine the the x- and y-intercepts of the graph of equation (1). The graph of line (1) is present in above figure. Slope intercept form of equation (1) is written as [tex]y = - \frac{1}{2}x + \frac{5}{2}[/tex],

The x-intercept is point where a line crosses the x-axis, and the y-intercept is the point where the line crosses the y-axis. As we know, two points determine any line, we can graph lines using the x- and y-intercepts. To determine the x-intercept, we substitute y=0 and solve for x. So, when y = 0 then 4x + 0 = 20

=> x = 5

similarly to determine the y-intercept, set x=0 and solve for y. When x = 0

=> 8y = 20

=> y = 5/2.

Hence, required value are (5,0) and (0,5/2).

For more information about y-intercept, visit :

https://brainly.com/question/25722412

#SPJ4

The angle that the lengths of ropes make with the ceiling is 90 degrees.

To determine the angle that the lengths of ropes make with the ceiling for an object with a weight of 100 N suspended by two ropes with equal tension of 50 N, we can follow these steps:

1. Understand that the vertical forces must balance, meaning the sum of the vertical components of tension in each rope must equal the object's weight.

2. Recognize that the vertical component of tension in each rope can be calculated using the sine function and the angle, θ, between the rope and the ceiling: T_vertical = T * sin(θ).

3. Set up an equation using the information provided: 2 * (50 N * sin(θ)) = 100 N, where θ is the angle we want to find.

4. Simplify the equation: 100 * sin(θ) = 100 N.

5. Divide both sides by 100: sin(θ) = 1.

6. Find the inverse sine (also known as arcsin) of 1: θ = arcsin(1).

7. Calculate the angle: θ = 90 degrees.

To know more about angle refer to

https://brainly.com/question/1309590

#SPJ11

Answer:

Since it is a right triangle, we can apply pythagores theorem.

Answer: a = 8.7 miles

Step-by-step explanation:

a^2 = c^2 - b^2

a^2 = 10^2 - 5^2

a^2 = 100 - 25

a^2 = 75

a ≈ 8.7

Therefore, the length of the missing leg is approximately 8.7 miles.

Answer:

The function g(x) = (3x)² can be simplified to g(x) = 9x², which is a vertical stretch of f(x) = x² by a factor of 9.

Therefore, the correct answer is B. The graph of g(x) is vertically stretched by a factor of 3 compared to the graph of f(x).