WHY IS NO ONE HELPING I'M BOUTTA GET REPORTED FR!!!!!!!!!!!!!!
what would happen to the weather if half of the human race just died off? would it get colder? why?

Answer:

Wavelength = 1.36 * 10^{-34} meters

Explanation:

Given the following data;

Mass = 0.113 kg

Velocity = 43 m/s

To find the wavelength, we would use the De Broglie's wave equation.

Mathematically, it is given by the formula;

[tex] Wavelength = \frac {h}{mv} [/tex]

Where;

h represents Planck’s constant.

m represents the mass of the particle.

v represents the velocity of the particle.

We know that Planck’s constant = 6.6262 * 10^{-34} Js

Substituting into the formula, we have;

[tex] Wavelength = \frac {6.6262 * 10^{-34}}{0.113*43} [/tex]

[tex] Wavelength = \frac {6.6262 * 10^{-34}}{4.859} [/tex]

Wavelength = 1.36 * 10^{-34} meters

Answer:

 f = 7.9487 10¹³ Hz

Explanation:

The photoelectric effect was correctly explained by Einstein assuming that the radiation is composed of photons, which behave like particles.

           hf = K + Ф

It indicates the frequency and the kinetic energy, let's look for the work function

          Ф = hf - K

let's reduce the magnitudes to the SI system

          K = 0.332 eV (1.6 10⁻¹⁹ J / 1 eV) = 0.5312 10⁻⁻¹⁹ J

let's calculate

          Ф = 6.63 10⁻⁻³⁴  6.64 10¹¹ - 0.5312 10⁻¹⁹

          Ф = 4.40 10⁻²² - 0.5312 10⁻¹⁹

          Ф = 5.27 10⁻²⁰ J

for the minimum frequency that produces photoelectrons, the kinetic energy is zero

           hf = Ф  

           f = Ф / h

           f = 5.27 10⁻²⁰ / 6.63 10⁻³⁴

           f = 7.9487 10¹³ Hz

Answer:

A black hole is a region of spacetime where gravity is so strong that nothing—no particles or even electromagnetic radiation such as light—can escape from it. The theory of general relativity predicts that a sufficiently compact mass can deform spacetime to form a black hole.

Answer:

[tex]\color{Blue}\huge\boxed{Answer} [/tex]

The potential environmental impacts associated with solar power—land use and habitat loss, water use, and the use of hazardous materials in manufacturing—can vary greatly depending on the technology, which includes two broad categories: photovoltaic (PV) solar cells or concentrating solar thermal plants (CSP).

Explanation:

I just answer the second question

Answer:

This powder is sodium chloride. In the second reaction (sulfuric acid with copper(II) oxide) the resulting solution was blue in colour. When this solution was heated a small amount of white powder was noted.

Explanation:

i saw it on quizlet

Answer:

Half-life does not depend on sample size, only on the constituents of the sample.

The second scientist should also observe a half-life of about 232 sec or 40 grams of  X remaining after 232 sec.  

Answer:

As it is the same substance, the half life will remain at 232 seconds.

Explanation:

Verified with correct test results.

Answer:

40 J

Explanation:

Gpe= mgh

=4*10*1

=40

Answer:

well its burning its callories so thats it technically

Explanation:

Answer:to measure distances between objects and to study the early universe

Explanation:

I had this question and I got it right

Answer:

The specific gravity of the wood is 1.56

Explanation:

Given;

mass of the wood in water, [tex]M_w_{H_2O}[/tex] = 0.0175 kg

apparent mass of the wood and lead sinker submerged in water, [tex]M_w_{(air)} + M_s_{H_2O}[/tex] = 0.0765 kg

apparent mass with both the wood and the sinker both submerged in water, [tex]M_w_{H_2O} + M_s_{H_2O} = 0.0452 \ kg[/tex]

Mass of the lead sinker alone submerged in water;

[tex]M_w_{H_2O} + M_s_{H_2O} = 0.0452 \ kg\\\\0.0175 \ kg + M_s_{H_2O} = 0.0452 \ kg\\\\M_s_{H_2O} = 0.0452 \ kg - 0.0175 \ kg\\\\M_s_{H_2O} = 0.0277 \ kg[/tex]

Mass of the wood in the air;

[tex]M_w_{(air)} + M_s_{H_2O} = 0.0765 \ kg\\\\M_w_{(air)} + 0.0277 \ kg = 0.0765 \ kg\\\\M_w_{(air)} = 0.0765 \ kg - 0.0277 \ kg\\\\M_w_{(air)} = 0.0488 \ kg[/tex]

Mass of water is calculated as follows;

[tex]M_w_{(air)} - M_w_{H_2O} = M_{H_2O}\\\\0.0488 \ kg - 0.0175 \ kg = M_{H_2O}\\\\0.0313 \ kg = M_{H_2O}[/tex]

The specific gravity of the wood is calculated as follows;

[tex]Specific \ gravity\ (S.G) \ of \ wood = \frac{mass \ of \ wood\ in \ air }{mass \ of \ water} \\\\Specific \ gravity\ (S.G) \ of \ wood = \frac{0.0488}{0.0313} \\\\Specific \ gravity\ (S.G) \ of \ wood = 1.559 = 1.56[/tex]

Therefore, the specific gravity of the wood is 1.56

Answer:

Explanation:

At the point when light is vertically polarized is incident on the polarizer whose axes are situated at angle points [tex]\theta _1 , \theta _2 , \theta _3[/tex] the intensity power in the wake of going through all the polarisers is given by the Malus law, applied threefold for every one of the three axes.

[tex]I = I_o \ cos \theta _1 \ cos \theta _2 \ cos \theta _ 3[/tex]

The heading of the direction of the polarization is equivalent to the pivoted axes of the polarizer provided that light is an electromagnetic wave, its course of polarization is therefore controlled by the electric field part.

∴

a)

When sheet A is removed, the transmitted light goes through B, at 30°.

[tex]I = I_o \ cos ^2 \theta _1 \ cos ^2 \theta _2 \ cos^2 \theta _3[/tex]

[tex]I = 20 \ cos ^2 30 \ cos ^2 60 \ cos ^2 30[/tex]

[tex]I = 2.81 \ W/m^2[/tex]

b)

When B is removed, No light passes since the axis of A and the axis of C are perpendicular to each other.

c)

When C is removed, the intensity is indeed zero since the axes are aligned and adjusted at 90° to one another.

[tex]\mathbf{d) \ I - I_o cos^2 (0) cos^2 (30) \ cos^2 (60)}[/tex]

[tex]\mathbf{d = 3.75 \ W/m^2}[/tex]

Answer:

vi and vtop = 0

Explanation:

Free fall is a motion of a body in which the only force acting of the body is the Gravitational Force. In this motion body moves with constant acceleration i.e acceleration due to gravity.

When an object is thrown downward from a non zero height say h the motion is referred to as free fall with initial velocity of object beign zero. Hence v=0

In free fall, an object have the slowest speed at the beginning of the motion which is at the top before the object starts to fall. [tex](V_i \ and \ V_{top})[/tex]

During a free fall, the object subjected to only acceleration due to gravity. The velocity of object increases as the object moves downwards and eventually becomes maximum before the object hits the ground.

The final velocity of the object is the greatest while the initial velocity of the object at the top before the free fall is the slowest.

[tex]V_f > V_i \ or\ V_{top}[/tex]

Thus, we can conclude that during a free fall, the velocity of the object increases downwards. The slowest speed can found at the beginning of the motion.

Learn more here:https://brainly.com/question/11698474

Answer:

In standard GR, nothing exists at the center of a black hole. The center of a black hole is a singularity, and because GR fails at that point it is simply removed from the manifold. That means that the singularity is not part of spacetime.

To answer your question more realistically, we believe that GR is an approximate theory that fails well before you reach the center. Unfortunately, we have no good alternative theory with which to answer the question in the region where GR fails. We simply don’t have any data from that regime and it is very hard to formulate a good theory without data. So there very well could be time at the center, but we simply don’t have a good way to even guess.

Answer:

Black hole is a region of space having a gravitational field so intense that no matter or radiation can escape

Actually time can't be stop.

although black hole slower a time

Explanation:

Time never cannot be stop totally.

Answer:

Increase

As the mass of either object increases, the force of gravitational attraction between them also increases.

Explanation:

The gravitational force is directly proportional to the mass of both interacting objects, more massive objects will attract each other with a greater gravitational force.

As the mass of either object increases, the force of gravitational attraction between them also increases.

Answered by none other than the ONE & ONLY #QUEEN herself aka #DRIPPQUEENMO

HOPE THIS HELPED!!!

Answer:

Radius of curvature of the mirror = 250 cm

Explanation:

Given:

Object distance from mirror = 250 cm (u=-250)

Object distance appears in mirror = 250 cm (v=-250)

Find:

Radius of curvature of the mirror

Computation:

Using mirror formula

1/f = 1/v + 1/u

1/f = 1/(-250) + 1/(-250)

f = (-250/2)

f = -125 cm or 125 cm

Radius of curvature of the mirror = 2(f)

Radius of curvature of the mirror = 2(125)

Radius of curvature of the mirror = 250 cm

Answer:

C. An external downward field is created or an external downward field is removed

Explanation:

As we can see that from the attached figure that the induced current would be counter clockwise. So the field occur because of induced current i.e. out of page. This represent that the current is induced in order to rise the flux out of the direction of the page

Therefore because of the external field, the field out of page & flux would be reducing or the external upward field is eliminated

So option C is correct

Answer:

Ethyl butyrate is used as an artificial flavoring resembling orange juice or pineapple in alcoholic beverages, as an ingredient of fragrance, and as a solvent and plasticizer for cellulose. It is also used in the production of polyvinyl butyral (PVB).

Explanation:

Answer:

1. could result in widespread contamination of air and water.

2. creation of radioactive wastes such as uranium mill tailings, spent (used) reactor fuel, and other radioactive wastes.

3. nuclear meltdowns

4. mining lung cancer risk

Answer:

0.238 m/min

Explanation:

The volume of water in the trough V =Ah' where A = area of cross-section = area of isosceles trapezoid = 1/2(a + b)h where a = length of bottom of isosceles trapezoid = 40 cm = 0.4 m, b =  length of top of isosceles trapezoid = 100 cm = 1 m and h = height of isosceles trapezoid = 60 cm = 0.6 m. So,

A = 1/2(a + b)h = 1/2(0.4 m + 1 m)0.6 m = (1.4 m)0.3 m = 0.42 m² and h' = height of water level in trough = H - h" where H = length of trough = 10 m and h" = depth of water level in trough = 10 cm = 0.1 m

So, V = Ah'

V = A(H - h") = A(10 - h")

Now, the rate of change of volume of the trough with respect to time dV/dt = d[A(10 - h")]/dt

dV/dt = -Adh"/dt

dh"/dt = -dV/dt/A

Since dV/dt = 0.1 m³/min, substituting the other variables into the equation, we have

dh"/dt = -dV/dt/A

dh"/dt = -0.1 m³/min/0.42 m²

dh"/dt = -0.238 m/min

This is the rate at which the depth is decreasing

Since the height h' = 10 - h"

dh'/dt = d(10 - h")/dt

= -dh"/dt

= -(-0.238 m/min)

= 0.238 m/min

So the water level is increasing at a rate of 0.238 m/min

It would be 50 kg.

Mass doesn't change.

Weight can.

Answer:

please give me brainlist and follow

Explanation:

Since density is described as mass divided by volume, as volume decreases, density increases. With enough drop in volume, the helium balloon becomes too dense to float.

Answer:

B.

Explanation:

I'm not sure if it's the right answer but I think it is. I hope I helped out in some way.

Answer:

[tex]0.00195\ \text{m}[/tex]

[tex]0.00293\ \text{m}[/tex]

Explanation:

m = Order = 1

D = Distance between screen and slit = 3.09 m

d = Slit distance = 1.01 mm

[tex]\lambda[/tex] = Wavelength = 639 nm

Distance from the first bright fringe from the central bright fringe is given by

[tex]y=\dfrac{m\lambda D}{d}\\\Rightarrow y=\dfrac{1\times 639\times 10^{-9}\times 3.09}{1.01\times 10^{-3}}\\\Rightarrow y=0.00195\ \text{m}[/tex]

Distance from the first bright fringe from the central bright fringe is [tex]0.00195\ \text{m}[/tex]

Distance from the second dark fringe from the central bright fringe is given by

[tex]y=(m+\dfrac{1}{2})\dfrac{\lambda D}{d}\\\Rightarrow y=(1+\dfrac{1}{2})\dfrac{639\times 10^{-9}\times 3.09}{1.01\times 10^{-3}}\\\Rightarrow y=0.00293\ \text{m}[/tex]

Distance from the second dark fringe from the central bright fringe is [tex]0.00293\ \text{m}[/tex].