Answer:
It creates Stronger and resistant polymers
Explanation:
Cross-linking is important in applications such as tires, adhesives etc because it increases the molecular mass of polymers. These cross-linked applications are important as they are strong mechanically, have good heat resistance and are also resistant to attacks by solvents and also wear. As these applications would get to be thicker and have more viscosity.
The importance of Cross-linking in certain applications such as tire, adhesive, and circuit boards production is to provide a material of more rigid structure and definite form.
What is crosslinking?Crosslinking is the chemical process of forming a covalent connection between two or more molecules. Crosslinking reagents are compounds with more than one reactive ends that are capable of chemically connecting to certain functional groups called polymers.
Chemical crosslinking has long been employed to change the physical characteristics of polymeric materials. An example is seen in the vulcanization of rubber serving as a prime illustration.
Therefore, the importance of Crosslinking between polymer chains provide a material a more rigid structure and, ultimately, a better-defined form.
Learn more about Cross Linking Here:
https://brainly.com/question/6480157
Technician A says the drivetrain on a vehicle includes the steering wheel. Technician B says the drivetrain on a vehicle includes the axles and wheels. Who is correct?
Based on the information provided, Technician B is correct because the drivetrain on a vehicle includes the axles and wheels.
Who is an automotive engineer?An automotive engineer can be defined as a professional who has completed and acquired his or her bachelor's degree in mechanical engineering and has been trained on how to create designs for new automobile vehicles (cars), test prototypes, troubleshoots problems that arise, and oversees the manufacturing process.
What is a drivetrain?A drivetrain can be defined as the group of components or mechanical system that are fitted in automobile vehicles, which is designed and developed to connect the transmission to the drive axles such as:
Universal jointDriveshaft.Axles and wheelsIn this context, we can reasonably infer and logically deduce that Technician B is correct because the drivetrain on a vehicle includes the axles and wheels.
Read more on drivetrain here: https://brainly.com/question/24083630
#SPJ1
As a mechanic, how will you assess the situation when the pilot insists that he wants to fly the aircraft despite giving him the advice that the aircraft is unworthy of flying?
A parallel-plate capacitor is disconnected from a battery, and the plates are pulled a small distance further apart. Do the following quantities increase, decrease, or stay the same?.
Answer: capacitance decreases as distance increases
Explanation: when the plates on the capacitor are being pulled what happens is it will decrease in capacitance so the charge will decrease in the capacitor and because the battery is pulled away and if the plate is fully charged the capacitance as the distance increases between the plates the capacitance drops and heres something else i found on it and the capacitance
Capacitance C∝d1 when plates of a capacitor are moved farther, the capacitance decreases. After disconnecting the battery, the charge on capacitor remains constant, therefore the energy stored by capacitor U (=2Cq), increases
What is the safe psi pressure for acetylene
Answer:
15psig
Explanation:
Calculate the root for the following function: -26+82.3x-88x^2+45.4x^3-9x^4+0.65x^5 with a maximum number of iterations of 10 and a tolerance of 0.001 wearing a) Bisection b) Newton Raphson c) secant d) false position e) fixed point
excel
Answer:
the value of the best I love it was thinking too tough be a good night love motorcycle
The hazard communication standard requires employers to do all of the following,except
Answer: All the options given regarding the hazard communication standard are correct except option D "prepare and post a list of employees who handle hazardous and toxic substances in the workplace".
The main requirements of employers that use hazardous chemicals are:
• ensure that chemicals are properly labelled.
• provide safety data sheets.
• train employees.
• create a written hazard communication program.
It should be noted that preparing and posting a list of employees who handle hazardous and toxic substances in the workplace is incorrect.
Therefore, the correct option is D.
Explanation: YW!!! please mark branlest! =^.^=
An engine with low oil pressure may have a noticeable
If the total length of a measurement is 10 1/2" what is half of this length?
Answer:
13.335 CM (1 ft, 1.335 cm)
I am 80% sure this is the answer, but i am not too keen on math so if i am wrong let me know and i will try my best to fix it!
I hope this helped! Have a good day :]
g Clay sized particles in a river are likely to be transported as _______________________, whereas gravel sized particles are likely to be transported as _____________________. Group of answer choices suspended load; dissolved load suspended load; bed load dissolved load; suspended load dissolved load; bed load
Answer:
suspended load; bed load
Explanation:
Suspended load is those particles in a river that are transported and float between and around the middle and top of the river, they often change the color of the river through their suspension such as clay.
Bed load is those particles in a river that are transported at the river bed or floor. This is as a result of their weight. Examples are relatively big stones.
Hence, in this case, Clay sized particles in a river are likely to be transported as SUSPENDED LOAD whereas gravel-sized particles are likely to be transported as BED LOAD
Always use needle nose pliers for prying and twisting.
Answer:
no
Explanation:
llll
Beginning with model year 2008, what type of communication protocol is required for diagnostics?
Beginning with model year 2008, Controller Area Network (CAN) is required for diagnostics.
What is diagnostics?Diagnostics are defined as the process of identifying an injury, ailment, or disease based on the symptoms and signs a person is exhibiting. In order to confirm or rule out illnesses and diseases, diagnostic tests are utilized. Before creating a treatment plan, your doctor needs particular information from a diagnostic test to make an accurate diagnosis.
The robust automotive bus standard known as a Controller Area Network (CAN) enables microcontrollers and other devices to interact with each other's applications without the need for a host computer. Devices and CAN busses are frequently found in industrial and automotive systems. Bosch created the Controller Area Network (CAN) bus, which saw its debut in manufacturing in 1991.
Thus, beginning with model year 2008, Controller Area Network (CAN) is required for diagnostics.
To learn more about diagnostics, refer to the link below:
https://brainly.com/question/12814536
#SPJ2
Statement 1: All balls hit the ground at the same time. Statement 2: All balls hit the ground with the same force. Statement 3: The bowling ball hit the ground first and the tennis golf ball hit the ground last. Statement 4: It is not possible to tell how much force each ball hit the ground with. Which statements must be TRUE regarding the rate of force of each falling object. Neglect air resistance.
Answer:
Statement 1: All balls hit the ground at the same time
Explanation:
When there is no resistance of air, the acceleration due to gravity experienced by all the bodies are same. So for falling bodies, neglecting the air resistance, the falling object will be weightless and therefore all the objects will hit the ground at the same time when there is nor air resistance and the objects are considered to be falling in vacuum.
emitter, base, and collector are the terminals of a?
(5 points) Knowing that the ammeter must be connected in series with the circuit and the voltmeter must be connected in parallel, what does this tells you about the internal resistance of each device?
This tells us that the internal resistance of the ammeter is very low because we would not want to impede the flow of current when trying to measure current. The internal resistance of the voltmeter must be high because it is added in parallel with the circuit and if added in series, it would cause resistance and alter the voltage reading.
Air in a large tank at 300C and 400kPa, flows through a converging diverging nozzle with throat diameter 2cm. It exits smoothly at a Mach number 2.8. According to one-dimensional isentropic theory, what is
(a) exit diameter and
(b) mass flow?
Answer:
The answer is "[tex]3.74 \ cm\ \ and \ \ 0.186 \frac{kg}{s}[/tex]"
Explanation:
Given data:
Initial temperature of tank [tex]T_1 = 300^{\circ}\ C= 573 K[/tex]
Initial pressure of tank [tex]P_1= 400 \ kPa[/tex]
Diameter of throat [tex]d* = 2 \ cm[/tex]
Mach number at exit [tex]M = 2.8[/tex]
In point a:
calculating the throat area:
[tex]A*=\frac{\pi}{4} \times d^2[/tex]
[tex]=\frac{\pi}{4} \times 2^2\\\\=\frac{\pi}{4} \times 4\\\\=3.14 \ cm^2[/tex]
Since, the Mach number at throat is approximately half the Mach number at exit.
Calculate the Mach number at throat.
[tex]M*=\frac{M}{2}\\\\=\frac{2.8}{2}\\\\=1.4[/tex]
Calculate the exit area using isentropic flow equation.
[tex]\frac{A}{A*}= (\frac{\gamma -1}{2})^{\frac{\gamma +1}{2(\gamma -1)}} (\frac{1+\frac{\gamma -1}{2} M*^2}{M*})^{\frac{\gamma +1}{2(\gamma -1)}}[/tex]
Here: [tex]\gamma[/tex] is the specific heat ratio. Substitute the values in above equation.
[tex]\frac{A}{3.14}= (\frac{1.4-1}{2})^{-\frac{1.4+1}{2(1.4 -1)}} (\frac{1+\frac{1.4-1}{2} (1.4)^2}{1.4})^{\frac{1.4+1}{2(1.4-1)}} \\\\A=\frac{\pi}{4}d^2 \\\\10.99=\frac{\pi}{4}d^2 \\\\d = 3.74 \ cm[/tex]
exit diameter is 3.74 cm
In point b:
Calculate the temperature at throat.
[tex]\frac{T*}{T}=(1+\frac{\Gamma-1}{2} M*^2)^{-1}\\\\\frac{T*}{573}=(1+\frac{1.4-1}{2} (1.4)^2)^{-1}\\\\T*=411.41 \ K[/tex]
Calculate the velocity at exit.
[tex]V*=M*\sqrt{ \gamma R T*}[/tex]
Here: R is the gas constant.
[tex]V*=1.4 \times \sqrt{1.4 \times 287 \times 411.41}\\\\=569.21 \ \frac{m}{s}[/tex]
Calculate the density of air at inlet
[tex]\rho_1 =\frac{P_1}{RT_1}\\\\=\frac{400}{ 0.287 \times 573}\\\\=2.43\ \frac{kg}{m^3}[/tex]
Calculate the density of air at throat using isentropic flow equation.
[tex]\frac{\rho}{\rho_1}=(1+\frac{\Gamma -1}{2} M*^2)^{-\frac{1}{\Gamma -1}} \\\\\frac{\rho *}{2.43}=(1+\frac{1.4-1}{2} (1.4)*^2)^{-\frac{1}{1.4-1}} \\\\\rho*= 1.045 \ \frac{kg}{m^3}[/tex]
Calculate the mass flow rate.
[tex]m= \rho* \times A* \times V*\\\\= 1.045 \times 3.14 times 10^{-4} \times 569.21\\\\= 0.186 \frac{kg}{s}[/tex]
Choose Odd one out of the options ?
A) PSRQ
B) SVUT
C) MNPO
D) KNML
Calculate the fraction of lattice sites that are Schottky defects for cesium chloride at 573 oC (this temperature is below the melting temperature (645oC)). Assume an energy for defect formation of 1.86 eV.
Answer:
[tex]2.9\times 10^{-6}[/tex]
Explanation:
[tex]Q_s[/tex] = Energy for defect formation = 1.86 eV
T = Temperature = [tex]573^{\circ}\text{C}=573+273.15=846.15\ \text{K}[/tex]
k = Boltzmann constant = [tex]8.62\times 10^{-5}\ \text{eV/K}[/tex]
The fraction of lattice sites that are Schottky defects is given by
[tex]\dfrac{N_s}{N}=e^{-\dfrac{Q_s}{2kt}}\\\Rightarrow \dfrac{N_s}{N}=e^{-\dfrac{1.86}{2\times 8.62\times 10^{-5}\times 846.15}}\\\Rightarrow \dfrac{N_s}{N}=2.9\times 10^{-6}[/tex]
The required ratio is [tex]2.9\times 10^{-6}[/tex].
Задание3 Напишите развернутый ответ на вопрос: «Почему непобедим тот народ, у которого «память корнями уходит в века?» (5-6 предложений)
In Biomedical engineering signals and systems, how is the fourier coefficient and the fourier transform expression written
Answer:
Fourier coefficient, Ck:
[tex]{ \rm{ c_{k}} = \int ^{ \infin} _{ - \infin } \{x(t) {e}^{jk \omega _{0} t} \} }[/tex]
Fourier transform:
[tex]{ \rm{x( \omega) = \int ^{ \infin} _{ - \infin} } \{x(t) {e}^{j \omega} t} \}[/tex]
car people i need some advice
what should be my first super car
Answer:
The first one.
Explanation:
The first one without a doubt
this is perfect.........
Do some research and find out whether the Pascaline calculator is a computer according to the Turing model.
No, it isn't. It can only perform basic mathematical calculations. A computer must be programmable in order to be Turing-complete.
What is Pascaline calculator?In 1642, Blaise Pascal invented the Pascal's calculator, a mechanical calculator. The laborious arithmetic calculations required by his father's work as the supervisor of taxes in Rouen inspired Pascal to create a calculator.
It must have some kind of programming language in which you can write instructions that can be followed automatically or by a human operator to perform any type of data processing.
Thus, it can be concluded that Pascaline calculator is not actually a computer according to the Turing model.
For more details regarding computer, visit:
https://brainly.com/question/13027206
#SPJ1
You are working on a residential heat pump. The heat pump is connected to a
240-V, 60-Hz power line. The compressor has a current draw of 34 amperes when operating. The compressor has a power factor of 70%. The backup strip heat is
rated at 10 kW. You need to know the amount of total current draw that will occur if
the strip heat comes on while the compressor is operating.
The amount of total current draw that will occur if the strip heat comes on while the compressor is operating is 53.778 A.
How to find the total currentWe have the following details
Pe = 10 Kw
compressor current = 34A
Power factor = 70%
The voltage applied = 240 V
frequency f = 60 Hz
P = ER² / R
= 240² / 10 x 10
= 57600 / 10000
= 5.76Ω
We have El = Lr = Et
El = Lr = 240
The true power P
10 x 10³ / 240
= 41.667 A
The total current is solved by
√41.667² + 34³
= √1736.138 + 1156
= √2892.138
= 53.778 A
Hence the amount of total current draw that will occur if the strip heat comes on while the compressor is operating is 53.778 A.
Read more on total current here:
https://brainly.com/question/20024264
#SPJ1
WHICH TASK BEST FITS THE ROLE OF A DESIGN ENGINEER ?
Answer: drafting blueprints
Explanation:
Who Can Help my assignment?
Answer:
10800 second
7570.824 pint
1.111 yd
Using benefit-cost ratio analysis, determine which one of the three mutually exclusive alternatives should be selected. Each alternative has a 10-year useful life and 20% MARR 247 А в с First Cost $120 $340 $560 $760 Uniform Annual Beneft $40 $100 $140 $170 $0 $0 Salvage Value $40 $50 СА B Stop sharing app honorocos sharing your screen
Help please!
Find two careers and explain why you would enjoy being in this career field.
Find two careers and explain why you would NOT enjoy being in this career field.
Note: You should have at least TWO paragraphs
The unit weight of soil is 17.3 KN/m3. The moisture content of this soil is 17% when the degree of saturation is 60%.
Answer:
degree of saturation at optimummoisture content is 78.1 %.
Explanation:
The maximum dry unit weight of the soilYa is 16.8kN/mThe optimum moisture content of the soilwis 17 %.The specific gravity of soil G is 2.73.Calculation:Determine the degree of saturation (S)using the relation.Yd = Gs Yw/ 1+Gsw/sHere, Yw is the unit weight of water.Substitute 16.8 kN/m' for a, 2.73 for G,9.81 kN/m' for u, and 17 % for w.16.8= 2.73x9.811/2.73x1 .4641 26.78S-1.594S =-0.4641-0.594S= -0.4641S= 0.4641S = 0.781x 100S = 78.1 %16.80.594Therefore, the degree of saturation atoptimum moisture content is 78.1 %.
helppppppp plssss Identifying job responsibilities for staff members is an example of which section of the project charter?
project requirements
project objectives
project team
project description
I need this word meaning and definition need asap?
Answer:
1. Alleviate: to make pain/suffering less severe.
2. Strenuous: requiring much energy and effort.
3. Revolutionize: to overthrow the established government; to change fundamentally.
4. Repetitive: doing or saying the same thing multiple times.
5. Prosthetics: a device designed to replace a missing body part, or make a part work better.
6. Infrastructure: the fundamental facilities and systems serving a country, city, or another area, including the services and facilities necessary for its economy to function.
A series circuit has a 12-volt power source and two resistors of 1 ohm and 2 ohms respectively. How many amps will flow when
the circuit is closed?
Answer:
6 amps
Explanation:
current =v÷r
12v÷2 ohms= 6amps