Answer:
Carbon is found in all living organisms.
Answer: d
Explanation: i promise I've took the k-12 test
From the following which is not an ore
a.bauxite
b.haematite
c.calamine
d.cyolite
Answer: d. Cyolite
Explanation:
a.bauxite - Aluminum ore ✅
b.haematite - Iron ore ✅
c.calamine - an ore of zinc ✅
d.cyolite - ❌ the ore is cryolite
✅ - is an ore
❌ - not an ore
What two factors must be held constant for density to be a constant ratio?
Answer:
Temperature and Pressure
Explanation:
Temperature and pressure cause change in volume.
So any change in volume will alter the ratio of density as given by equation of density.
Density = mass/ volume
Change in volume will alter the ratio.
Kindly mark it branliest if the answer is little bit satisfying.
In a movable pulley system, where does the other effort come from?
Answer:
In a movable pulley system, where does the other effort come from? is carried by this end of the rope. This means that the structure (ceiling) does half the effort.
Explanation:
cuales son los nombres de la distribución de los electrones en un átomo ?
How does density affect sinking and floating in water?
Answer:
Density is a measure of how heavy something is compared to its size.
If an object is more dense than water it will sink when placed in water, and if it is less dense than water it will float.
Density is a characteristic property of a substance and doesn’t depend on the amount of substance.
Explanation:
If you compared the weight of wood and an equal amount, or volume, of water the sample of wood would weigh less than the sample of water. This means that wood is less dense than water. Since wood is less dense than water, wood floats in water, no matter how big or small the piece of wood is.
A student might want to know why a boat made out of steel can float when steel is more dense than water. This is not an easy question and requires a different approach than what students have seen so far. We do not necessarily recommend the following explanation for 5th graders but here is the idea:
An object floats when it displaces a volume of water that has a mass equal to the mass of the object. So if a material like steel is shaped into a boat and made larger and larger, it will displace more and more water. When it is large enough to displace a volume of water that has a mass equal to the mass of the boat, the boat will float.
Why is it important for scientists to use the scientific method?
A. Scientists would not ask questions if the scientific method were
not used.
B. Experiments would not produce any data without the scientific
method.
C. The scientific method helps scientists get accurate, repeatable
results,
D. Using the scientific method means that the results will support the
hypothesis
Explanation:
It provides an objective, standardized approach to conducting experiments and, in doing so, improves their results. By using a standardized approach in their investigations, scientists can feel confident that they will stick to the facts and limit the influence of personal, preconceived notions.
I hope this helps you out!
The lower the pressure, the lower a liquid’s boiling point is. Water actually boils much faster at the top of a mountain where air pressure is lower. Without pressure water in the body begins to boil. What do you think will happen to your body as blood, saliva, and other fluids boil?
Answer:
The lower the pressure, the lower a liquid's boiling point is. That's why water boils much faster at the top of a mountain than it does at the bottom. In space, there is no pressure. So the boiling point could easily drop to your body temperature.
mark as a brainlist plz.
15.24. Calcium hydroxide, also known as slaked lime, is used in industrial processes in which low concentrations of base are required. Only 0.16 g of Ca(OH)2 dissolves in 100 mL of water at 25°C. What is the concentration of hydroxide ions in 250 mL of a solution containing the maximum amount of dissolved calcium hydroxide?
The concentration of the hydroxide ions, OH¯ in 250 mL of the solution containing the maximum amount of dissolved calcium hydroxide is 0.01728 M
We'll begin by calculating the number of mole of in 0.16 g of Ca(OH)₂. This can be obtained as follow:
Mass of Ca(OH)₂ = 0.16 g
Molar mass of Ca(OH)₂ = 40 + 2[16 + 1] = 74 g/mol
Mole of Ca(OH)₂ =?Mole = mass / molar mass
Mole of Ca(OH)₂ = 0.16 / 74
Mole of Ca(OH)₂ = 0.00216 mole Next, we shall determine the molarity of the stock solution of Ca(OH)₂.Mole of Ca(OH)₂ = 0.00216 mole
Volume = 100 mL = 100 / 1000 = 0.1 L
Molarity of Ca(OH)₂ =?Molarity = mole / Volume
Molarity of Ca(OH)₂ = 0.00216 / 0.1
Molarity of Ca(OH)₂ = 0.0216 MNext, we shall determine the molarity of the diluted solution. This can be obtained as follow:Volume of stock solution (V₁) = 100 mL
Molarity of stock solution (M₁) = 0.0216 M
Volume of diluted solution (V₂) = 250 mL
Molarity of diluted solution (M₂) =?M₁V₁ = M₂V₂0.0216 × 100 = M₂ × 250
2.16 = M₂ × 250
Divide both side by 250
M₂ = 2.16 / 250
M₂ = 0.00864 MThus, the molarity of the diluted solution is 0.00864 M
Finally, we shall determine the concentration of the hydroxide ions, OH¯ in the diluted solution. This can be obtained as follow:Ca(OH)₂(aq) —> Ca²⁺(aq) + 2OH¯(aq)
From the balanced equation above,
1 mole of Ca(OH)₂ contains 2 moles of OH¯
Therefore,
0.00864 M Ca(OH)₂ will contain = 2 × 0.00864 = 0.01728 M OH¯
Thus, the concentration of the hydroxide ions, OH¯ in 250 mL of the solution containing the maximum amount of dissolved calcium hydroxide is 0.01728 M
Learn more: https://brainly.com/question/11471182
IN 4Ca(OH)2 how many atoms of calcium.
This substance contains 4 atoms. Ca = 1. O = 1. H = 2 because H2 means two atoms of the substance it comes after.
Element X has two isotopes. One has a mass of 45.0 amu and is 45.0% abundant. The other has a mass of 47.0 amu and is 55.0% abundant. What is the average atomic mass of element X?*
0 46.1 amu
O 36.5 amu
0 43.8 amu
0 48.9 amu
The average atomic mass of element X that has two isotopes (one of 45.0 amu mass and 45% abundance and the other of 47.0 amu mass and 55.0% abundance) is 46.1 amu (option 1).
The average atomic mass (A) of element X can be calculated as follows:
[tex] A = m_{1}\%_{1} + m_{1}\%_{1} [/tex] (1)
Where:
m₁: is the mass of isotope 1 = 45.0 amu
m₂: is the mass of isotope 2 = 47.0 amu
%₁: is the abundance percent of isotope 1 = 45.0 %
%₂: is the abundance percent of isotope 1 = 55.0 %
Hence, the average atomic mass is (eq 1):
[tex] A = m_{1}\%_{1} + m_{1}\%_{1} = 45.0 amu*45.0\% + 47.0 amu*55.0\% = 45.0 amu*0.45 + 47.0 amu*0.55 = 46.1 amu [/tex]
Therefore, the average atomic mass of element X is 46.1 amu (option 1).
Find more about atomic mass here:
https://brainly.com/question/3187640?referrer=searchResultshttps://brainly.com/question/17338557?referrer=searchResultsI hope it helps you!
In an experiment combining vinegar and baking soda, gas is given off. In this
chemical reaction, the vinegar and baking soda are…
A elements
B products
C suspensions
D reactants
Answer:
The correct answer is D hope this helped :3Answer:
(D)
Explanation:
In the reaction between vinegar and baking soda, the reactants are vinegar (acetic acid) and baking soda (sodium bicarbonate). The products are sodium acetate, water, and carbon dioxide gas.
how many valence electrons does P have?
Answer:
5 valence electrons
Explanation:
Phosphorus is in group VA so it has 5 valence electrons and Oxygen is in group VIA so each oxygen has 6 valence electrons.
i don't need to know why i just want the awnser
Answer:
I remember doing this in 7th,
1. D
2. B or D, more leaning on B though
3. A
Answer pls ASAPPP 50 pointsss!!
Answer:
There should only be one chemical reaction, this is because toasting the bread is not only using heat, but you cannot untoast the bread, and also theres a reaction with the amino acids and sugar in bread when it's cooked. I hope this helps you! :)
Answer:
One
Explanation:
One Chemical changes-It was when he toasted the bread. The heat changed the bread so that it has the crust on the outside
A container contains three gases. If the partial pressure of carbon dioxide is 0.50 atm, the partial pressure of nitrogen is 0.30 atm, and the partial pressure of methane is 0.40 atm, what’s the total pressure inside the container?
Answer:
1.20 atm
Explanation:
A container contains three gases. If the partial pressure of carbon dioxide is 0.50 atm, the partial pressure of nitrogen is 0.30 atm, and the partial pressure of methane is 0.40 atm, what’s the total pressure inside the container?
Do not let chemistry questions SCARE you! The TOTAL means
ADD THEM UP.
You can do this without a scientific calculator :-)
0.50 +0.30 + 0.40 = 1.20 atm
what does the theory of plate tetonics state
Answer:
Plate tetonics theory is the idea that different tectonic plates, are constantly moving and changing the surface of our Earth. They can move in three ways, convergent, divergent, and transform. Seafloor Spreading is like an example of divergent movement. When the plates diverge from each other it can create various changes such as creating a new sea floor. You can use seafloor spreading as an example of the plate tetonics theory.
Explanation:
What are the most common sources of nitrates that lead to unhealthy water systems
Answer:
Sources of nitrate that can enter your well include fertilizers, septic systems, animal feedlots, industrial waste, and food processing waste.
Water, made of 1 oxygen atom bonded with 2 hydrogen atoms, is what
Answer:
It is a water molecule.
Explanation:
A water molecule consists of two atoms of hydrogen linked by covalent bonds to the same atom of oxygen. Atoms of oxygen are electronegative and attract the shared electrons in their covalent bonds.
Answer:
A water molecule is an example of a molecule created through covalent bonding. Water is made up of one oxygen atom and 2 hydrogen atoms, hence the chemical symbol H2O. A hydrogen atom is made up of 1 proton at its core and 1 electron that revolves around the core in a three-dimensional orbit.
Explanation:
A mixture of hydrogen, nitrogen, and water vapor has a total pressure of 864 mmHg. The partial pressure of hydrogen is 220 mmHg and that of nitrogen is 410 mmHg. What is the partial pressure of water vapor?
Answer:
As per Dalton's law of Partial pressure,
The total pressure of a mixture of gases is equal to sum of partial pressure of individual components of the mixture.
So,P=P_H+P_N+P_WP=P
H
+P
N
+P
W
\implies 864\ mm=220\ mm+410\ mm+P_W\implies⟹864 mm=220 mm+410 mm+P
W
⟹ P_W=864-630=234P
W
=864−630=234 mm of Hg.
Explanation:
"The partial pressure of water vapor is 234 mm Hg."
What is partial pressure?
The force that a gas exerts is known as partial pressure. The total pressure of a mixture of gases is equal to the sum of their partial pressures.
Partial pressure can be calculated by using the formula: [tex]P_{Total} =P_{N} +P_{H} +P_{H}[/tex]
Puts the value of given data in above equation.
[tex]Px_{W} =864-410-220\\\\= 234 mm Hg[/tex]
To know more about partial pressure.
https://brainly.com/question/22285534
#SPJ
An atom has 17 protons and 18 neutrons.
Which symbol represents that atom, including its mass number?
Answer:
Cl
Explanation:
cl has mass number 35 and its atomic number is 17 so number of proton =atomic number 17 and number of neutron is =mass number -number of proton =35-17 =18
3. If you drive for 3 hours at a constant speed and make it 400 miles, how fast did you go?
Answer:
133.333333333 mph
or
214.5791999994464 kph
Explanation:
Answer:133.333333333 mph
or
214.5791999994464 kph
Explanation:
When does an electrically charged object attract another object?
A. When one object is far away from the other
B. When each object is negatively charged
C. When the objects are oppositely charged
D. When each object is positively charged
Answer:
C. When the objects are oppositely charged
Explanation:
Electrostatic interactions are commonly observed whenever one or more objects are electrically charged. Two oppositely-charged objects will attract each other. A charged and a neutral object will also attract each other. And two like-charged objects will repel one another.
From Bing, this is not my work
Answer:C
Explanation:
CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC! lol i think its c
ANSWER ASAP PLZ???????????????????????????????????
Answer:
The answer should be A
Explanation:
Answer:
Leaving a Copper penny in vinegar until it turns green
Explanation:
the others are physical changes. when copper penny is put in vinegar, a reactive oixde layer is formed which is green in colour. namely, Cu(II) acetate.
The green growing on the penny of copper and the rust forming on the nail of iron are chemical changes. Boiling away salt water, scraping iron filings from a mixture of sand with a magnet, and breaking a rock with a hammer, are physical changes.
14. The following are a list of the four parts of John Dalton's atomic theory Indicate which of
the parts have been modified and why.
1. All matter is made of tiny, indivisible particles called atoms
2. All atoms of an element are identical and all atoms of different atoms are different
3. Atoms of one element cannot be turned into atoms of another element.
4. All atoms combine with one another in fixed whole number ratios.
Answer:
1
all matter is made of tiny particles called atom
Which one please help
Answer:
density is mass more mass more density and same as volume
.
You should be able to
these groups on the periodic table, and know their
properties.
Answer:
The vertical columns on the periodic table are called groups or families because of their similar chemical behavior. All the members of a family of elements have the same number of valence electrons and similar chemical properties.
Explanation:
I HOPE NAKATULONG PO AKO:)PA BRAINLEST NLNG PO SANA:(.
If the Moon orbited Earth twice as fast, how many high tides would occur in one day?
Four high tides would occur in one day, if the moon orbited Earth twice as fast.
What are high tides?The tide when the water is at its greatest elevation.
At the moment, high tides occur twice a day. So if the moon orbits the earth twice as fast, high tides will occur twice as many, which means four times a day.
High tides occur 12 hours and 25 minutes apart. It takes six hours and 12.5 minutes for the water at the shore to go from high to low, or from low to high.
The best-known effect of the moon is its gravitational pull on Earth's oceans, which results in two high tides and two low tides every day.
But if the moon were half the distance from Earth as it is now, the tides would be eight times higher.
Learn more about the high tides here:
https://brainly.com/question/24770454
#SPJ2
The "clusters" of Democritus are like what kind of material
that we know of today?
what is the polystyrene?
Answer:
Polystyrene is a versatile plastic used to make a wide variety of consumer products.
Explanation:
Answer:
polystyrene, a hard, stiff, brilliantly transparent synthetic resin produced by the polymerization of styrene. Styrene is obtained by reacting ethylene with benzene in the presence of aluminum chloride to yield ethylbenzene.
Explanation:
in other words its a plastic
What is the frequency of red light with a wavelength of 645 nm?
Answer:
4.64E14
Explanation:
First convert 645 nm to m = 6.4500E-7m. The equation for finding v with these values is the speed of light/wavelength. so 2.998E8/6.4500E-7m.
so your v or frequency would equal 4.64E14
Fun fact you know this is visible light because the visible light range is within the E14 range.