Answer:
god loves you i love u
everybody loves you
Use the drop-down menus to indicate the stage of technological design in which each action would occur.
Answer:
Use the drop-down menus to indicate the stage of technological design in which each action would occur.
✔ Design a solution.
Establish criteria and prepare the initial design.
✔ Evaluate a solution.
Redesign and retest as necessary.
✔ Identify a problem.
Define a need and research related information.
✔ Implement a solution.
Build and test a prototype.
Explanation:
Took the quiz
Answer:
Design a solution: establish criteria and prepare the initial design.
Evaluate a solution: redesign and retest as necessary.
Identify a problem: define a need and research related information.
Implement a solution: build and test a prototype.
What force is responsible for the difference between the weight of each object in the air and its apparent weight in water?
Answer:
Buoyant Force
Explanation:
"Buoyancy or upthrust, is an upward force exerted by a fluid that opposes the weight of a partially or fully immersed object." - Google
10, What is the Dependent Variable?
how does one burn coffee
Answer:
coffee can be burnt
Explanation:
coffee can be burned when brewing. When an empty pot sits on the heating element in a restaurant coffee machine it can get very hot. When the first stream of a new brew cycle hits the bottom of the pot, boils off very quickly, producing a horrible smell and taste that infuses the entire pot.
I'm having trouble with my wireless headphones that won't turn on at all it's not blinking why? need help asap.....
Answer:
Try a hard reset: Press and hold both the power button and the volume button (plus the other 2 as well perhaps) for about 10 seconds and then release. Check if the earphones will then either show that they are charging (with the cable inserted of course) or that they will turn on if the Power button is pressed. Explanation:Hope this helped you
How do particles in the most rigid state of matter move? A. They stay close together and vibrate in place B. They move freely from one place to another within their container C. They stay close together and slip past one another D. They bounce off one another and the slides of their container
Answer:
A: they stay close together and vibrate in place
Explanation:
assuming the most rigid state would be a solid, thats how particles of a solid move
Answer:
A
Explanation:
particles in the most rigid state (soilds) vibrate on the spot
each particle is attached to several others so they cant move freely
True or False: A larger numerical value for electron affinity means it is more difficult for an electron to be added to an atom.
Answer:
i feel like it's false. i'm not quite sure right now, but i have a feeling that it's false. i hope i'm right.
Explanation:
Write a paragraph to explain the answer to the following prompt:
Imagine you are a scientist just teleported to a place that has no gravity. Write a journal entry to describe your experience. Consider how the lack of gravity might affect your weight. Do you still fit the definition of matter? Make sure to document your emotions!
Answer:
hinndndnnddnndndndnd do djfj
Explanation:
hdhdjdbdndndndjjddjdndjdjdndnndndndnd be rnnrbr
If we compare and contrast the three liquids seen in the jar, the BEST explanation would be that
A)
water is lighter than oil and syrup.
B)
syrup is the thickest liquid of the three.
oil is the least buoyant of the three liquids.
D)
water is denser than oil but less dense than syrup.
Answer:
the answer is d
Explanation:
What are the important features of a model of Earth's plates?
Answer:
The main features of plate tectonics are:
Convection currents beneath the plates move the crustal plates in different directions. The source of heat driving the convection currents is radioactivity deep in the Earths mantle.
The important features of earth's plates are seismicity,volcanicity and tectonic activity along plate margins.
What are plate tectonics?It is a generally accepted scientific theory which takes into consideration earth's crust to be made up of tectonic plates. These plates move slowly and are moving since 3.4 billion years ago.
The model is developed on the concept of continental drift .Earth's lithosphere is split up in to seven-eight major plates and many minor plates.The position where plates meet their relative motion determines the plate boundary.
Tectonic plates are made up of lithosphere of ocean and thicker continental lithosphere.These plates are able to move because lithosphere has high mechanical strength.Lateral density variations occurring in mantle cause convection.
Learn more about plate tectonics here:
https://brainly.com/question/16926233
#SPJ2
The drawing shows an apple falling to the ground. In which of the following three
positions does gravity act on the apple?
Position 1
Position 2
Position 3
A.
B.
C.
D.
2 only
1 and 2 only
1 and 3 only
1, 2 and 3
Answer:
its 1 and 2
Explanation:
because the 3rd one is alrdy in the ground
which of the following below is an example of a chemical change?
a) heated metal glows red
b) pennies turn green overtime
c) butane is distilled from crude oil
d) soy sauce makes white rice turn brown
answer: (c) butane is distilled from crude oil
Explanation:
this is the answer because a chemical change is when the formula or what’s inside of it changes ( not what it looks like) so when the butane is token out of the crude oil it changes the formula
ASAP MULTIPLE CHOICE WILL MARK BRAINLIEST
Who determined the mass of the electron?
Niels Bohr
Linus Pauling
Robert Millikan
J.J. Thomson
Answer:
J.J. Thomson
Explanation:
According to my book and wiki, Historically, the mass of the electron was determined directly from combining two measurements. The mass-to-charge ratio of the electron was first estimated by Arthur Schuster in 1890 by measuring the deflection of "cathode rays" due to a known magnetic field in a cathode ray tube. It was seven years later that J. J.
Please correct me if I'm wrong.
Answer:
Robert Millikan
Explanation:
Robert was the true answer
If you had an object with a density of 1.12 g/cm2, would it sink or float in a container of salt water that has a density of 1.35 g/ml?
a -sink
b-float
The object will float on the salt water.
We have an object of density 1.12 g/cm³.
We have to determine whether it will sink or float in salt water of given density.
How many milliliter are their in 1 cm³ ?In 1 cm³ there are 1 ml
According to the question -
Density of object = ρ(O) = 1.12 g/cm³.
Density of salt water = ρ(S) = 1.35 g/ml = 1.35 g/cm³.
For the object to sink its density should be greater than that of the salt water. Mathematically -
ρ(O) > ρ(S) → Object will sink.
ρ(O) < ρ(S) → Object will float.
Now, it can be seen that -
ρ(O = 1.12) < ρ(S = 1.35)
Therefore, the object will float on the salt water.
To solve more questions on fluid mechanics, visit the link below-
https://brainly.com/question/4293593
#SPJ2
Give the electronegativity for the following elements of LI
Answer:
0.98
Explanation:
Describe air using the terms: mixture, atoms, and molecules.
Answer: Here you go.
Explanation:
The atoms in molecules are joined by covalent bonds. Air is a mixture that contains the elements nitrogen, oxygen and argon, and also the compound carbon .
Hope this helps!
What does the number below each element's symbol represent?
A. The average number of isotopes
B. The average atomic mass
C. The average atomic number
D. The average mass of the ions
Answer:
B. The average atomic mass.
APEX
Answer:
The average atomic mass.
Explanation:
Identify the independent and dependent variables in the following experiment: A scientist grew bacteria on the gel in her lab. She wanted to find out if the bacteria would grow faster on gel A or gel B. She placed a few bacteria on gel A and a few on gel B. After 24 hours, she observed how many bacteria were present on each type of gel.
The dependent was before she started changing them and the independent variable is the process of them changing.
The independent variable is the type of gel, the dependent variable is the growth rate of the bacteria.
Dependent variables and independent variables are terms used in mathematics, statistics, and other experimental sciences. Each of them is characterized by:
Dependent variable: Its value is the result of a series of variable conditions that are modified on purpose.Independent variable: These are variables that are modified on purpose to show a phenomenon and obtain a result in a dependent variable.According to the above, in the situation presented, the independent variable is the type of gel because two types of gel are used, to obtain different results according to the characteristics of each gel.
Additionally, the dependent variable of this experiment is the growth rate of the bacteria under different conditions (gel A and gel B).
Learn more in: https://brainly.com/question/1479694
Jaden listed the similarities of using coal, natural gas, and petroleum to generate electricity. Coal, natural gas, and petroleum: – use turbines – require heat – convert electrical energy to kinetic energy – produce pollution in the form of smoke Which best describes Jaden’s mistake? Only coal-fired power plants use turbines. Power plants do not require heat. Kinetic energy is converted to electrical energy. Coal does not produce pollution.
Answer:
The answer is C. Kinetic Energy is converted to electrical energy
Explanation:
Just took the test
Electric energy is converted to kinetic energy is the mistake that Jaden made in this scenario.
What is Energy?This is defined as the capacity and ability to do work and examples include kinetic, electrical etc.
The kinetic energy through the movement of water by the wind is what powers the turbine to become an electric energy and not electrical energy being converted to kinetic energy.
Read more about Energy here https://brainly.com/question/13881533
#SPJ2
What is the concentration that of chloride ions in a .193 m solution of potassium chloride
Answer:
solution of K3PO4?
1.31 m
2.
Concentration of Chloride Ions in a 0.193m solution of Potassium Chloride is _______.
0.193 m
3.
Concentration of Iodide ions in a 0.193 solution of Barium iodide is _________.
0.386 m
4.
In a Titration of 35.00 mL of 0.737 m H2So4, _______ mL of a 0.827 m KOH solution is required for neautralization.
62.4
5.
Consider the following reactions
AgNo3 ------>
Co(No3) ---->
AgNo3 ---->
Which is the correct order of increasing activity for these metals?
Ag < Co < Zn
6.
There are ______ Mol of bromide ions in 0.500 L of a 0.300M solution of AlBr3
0.450 m
7.
How many grams of Sodium Chloride are there in 550 mL of a 1.90 m aq solution of sodium CL?
6.11 g
8.
The total concentration of ions in a 0.250 M solution of HCL is _______?
0.500 m
9.
How many moles of Co 2+ are present in 0.200 L of a 0.400 M solution of Co I2
0.0800
10.
A Neautralization reaction between an acid and a metal hydroxide produces
Water and a salt
11.
7 Strong Acids
Claire HCl
Brian HBr
invented HI
nutrious HNo3
(3)candy HClO3
(2,4)sold H2So4
(4)profit HClO4
12.
8 strong bases
Lily LiOH Lithium Hydroxide
never NaOH Sodium Hydroxide
knew KOH PossasiumHydroxide
Robert RbOH
could ClOH
bake Ba(OH)2
strawberry Sr(OH)2
cake Ca(OH)2
13.
What are the spectators ions in the reaction between KOH(aq) and HNO(aq)
HF + OH ---> H2O + F-
14.
Combining Aq solution of BaI2 and Na2So4 affords a precipitate of BaSO4
Which Ions is/are spectator ions in the reaction?
Na + and I -
15.
The Spectator ions in the react between aq Hydrochloric acid and Aq Ammonia
Are ________
B. Cl - only
16.
Spectator ions of aq hydrofluoric acid and aq barium hydroxide are _________
D. Ba 2+ only
17.
Spectator ions in reactions
Aq perchloric acid and Aq barium hydroxide are >>>>>>>
ClO 4- and Ba 2+
To solve this we must be knowing each and every concept related to concentration and its calculation. Therefore, the concentration that of chloride ions in a 0.193 m solution of potassium chloride is 0.193 m.
What is concentration?There are two components in an aqueous solution: the solute and the solvent. You must be familiar with these two fundamental terminology for solution concentration. The quantity of solute present in the solution must always be recorded.
A solution's concentration can be expressed in a variety of ways. Chemists frequently work with moles when doing their tasks. In place of the number of moles, pharmacists will utilize percentage concentrations.
KCl[tex]\rightarrow[/tex] K⁺ + Cl⁻
concentration of KCl= concentration of K⁺= concentration of Cl⁻ = 0.193 m
Therefore, the concentration that of chloride ions in a 0.193 m solution of potassium chloride is 0.193 m.
To know more about concentration, here:
https://brainly.com/question/14803618
#SPJ5
Is nickel ferromagnetic How do you know?
Answer:
please mark brainliest!
Explanation:
The element Nickel (Ni) is one of the few ferromagnetic metals. Ferromagnetic means they are attracted to magnets and can be magnetized themselves. Most metals aren't magnetic with the exception of iron, nickel, cobalt, gadolinium, neodymium and samarium.
Answer: ummmmmm
Explanation:
Which food molecules are inside the tube
Answer:
I'm sorry what this question needs more context.
Explanation:
Answer:what are the foods?
Explanation:
The Sun releases a lot of energy in many different forms. The Earth receives a small portion of this energy but it is enough to help keep the atmospheric temperature from changing too much. Which of the following allows the Sun’s energy to reach the Earth? (SC.7.P.10.1)A. conduction B. convection C. radiation. D. reflection
C would be my best guess because of ultraviolet radiation
Hope this helps! Good luck :)
What is 1 item that is a compound?
Give an example of how the 1 item is a compound :D
Water
Water is a compound because it is made from more than one kind of element (oxygen and hydrogen).
what affects the rate at which acid rain reacts with a statue
The thing that affects the rate at which acid rain reacts with a statue is the concentration of sulfur dioxide and carbon dioxide in the environment.
What is Acid rain?Acid rain may be defined as a type of precipitation on the surface of the earth that involves a significant amount of acids like nitric acid, sulphuric acid, and carbonic acid due to the heavy concentration of nitrous oxide, carbon dioxide, and sulfur dioxide in the environment.
This high concentration of acids in acid rain generally reacts with metals and corrodes them. They permanently lose the actual shine of marble, statues, buildings, etc.
The concentration of these acids typically affects the rate at which acid rain reacts with a statue. If there is a high concentration, it highly influenced the property of statues.
Therefore, the thing that affects the rate at which acid rain reacts with a statue is the concentration of sulfur dioxide and carbon dioxide in the environment.
To learn more about Acid rain, refer to the link:
https://brainly.com/question/1760060
#SPJ2
1. Compare an element, compound and mixture.
Answer:
An element contains just one type of atom. A compound contains two or more different atoms joined together. A mixture contains two or more different substances that are only physically joined together, not chemically. A mixture can contain both elements and compounds.
Explanation:
brainly pls
yoeahahjsvshjsvstusbsbhsheudhdbd hdid
Please Help!!!!! Need by 11:30
Answer:
D i think
Explanation:
If you were approaching the solar system in a spaceship, you would notice that the Sun
Answer:
No
Explanation:
Which two physical properties allow a mixture to be separated by chromatography?
Solubility and molecular polarity
The answer is given but I'd like to understand how one would get to the answer.
Answer:
Find the limiting reactant.
Explanation:
Using the ratio in the chemical formula, find the limiting reactant.
[tex]0.164mol Mn*\frac{2molMnO3}{2molMn} = 0.164molMnO3[/tex]
[tex]0.232molO2*\frac{2molMnO3}{3molO2} = 1.55molMnO3[/tex]
The second equation results in less mol of MnO₃, therefore it is the limiting reactant and changing the moles of O₂ to moles of MnO₃ which will give the theoretical yield which is 1.55 mol MnO₃.