The correct answer is: The dianion can form a resonance-stabilized conjugated ring, which tends to absorb visible light.
The correct answer is: The dianion can form a resonance-stabilized conjugated ring, which tends to absorb visible light.
In the first part of the experiment, the reagents used are benzidine and hydrogen peroxide, which react to form a compound called a dianion. This dianion is initially colorless, but when sodium hydroxide is added, it causes the dianion to undergo a rearrangement that forms a resonance-stabilized conjugated ring. This conjugated ring absorbs visible light in the blue-green range, which causes the solution to appear red. This color change is used as an indicator for the presence of blood in forensic and medical labs because benzidine and its derivatives are known to react with the heme group found in blood to form a similar colored proproductduct.
Visit to know more about conjugated ring:-
https://brainly.com/question/15047805
#SPJ11
Name the following alkyne:
ch3
|
ch3ch2c = cch2ch2chch3
=
The name of the alkyne is 3-ethyl-4-methyl-5-(prop-1-en-2-yl)oct-2-yne.
ch3
|
ch3ch2c = cch2ch2chch3
Alkyne explained.
Alkyne is a type of organic compounds that contain carbon to carbon triple bond. Alkynes are unsaturated hydrocarbon because they have fewer hydrogens than corresponding alkenes.
The general formula for alkynes is cnH2n -2 where n is the number of carbon in the compound. This means alkynes has fewer two hydrogens than corresponding alkenes.
Therefore, the carbon carbon triple bond in alkynes is composed of one sigma bond and two pi bond in the orbitals.
Learn more about alkyne below.
https://brainly.com/question/22933069
#SPJ1
A series of lines in the spectrum of neutral Li atoms rise from transitions between 1s2 2p1 2P1s 2 2p 12 and 1s2nd1 2D1s 2 nd 12 D and occur at 610. 36 nm, 460. 29 nm, and 413. 23 nm. The d orbitals are hydrogenic. It is known that the transition from the 2P 2 P to the 2S 2 S term (which arises from the ground-state configuration 1s22s1)1s 2 2s 1 ) occurs at 670. 78 nm.
Calculate the ionization energy of the ground-state atom
The ionization energy of the ground-state Li atom can be calculated using the given spectral lines and theyhko l.
Here are the steps:
1. Identify the transition wavelengths: 610.36 nm (transition 1), 460.29 nm (transition 2), 413.23 nm (transition 3), and 670.78 nm (transition 4).
2. Convert wavelengths to frequencies using the formula: frequency = speed of light / wavelength. Use c = 3 x 10^8 m/s and convert wavelengths to meters.
3. Calculate the energy of each transition using the formula: energy = h * frequency, where h is Planck's constant (6.626 x 10^-34 Js).
4. Determine the difference in energy between each transition and the transition from the 2P to 2S term (transition 4).
5. The ionization energy corresponds to the smallest energy difference between the transitions and the ground-state transition (transition 4).
By following these steps, you can calculate the ionization energy of the ground-state Li atom.
To know more about ionization energy refer here: https://brainly.com/question/28385102#
#SPJ11
What volume of a 2. 4 M solution of calcium hydroxide is required to yield 14. 4 mol?
It takes 6 litres of a 2.4 M calcium hydroxide solution to produce 14.4 mol.
Calcium hydroxide is a commonly used chemical compound in industries like construction, agriculture, and food production. It is used in the production of cement, as a soil amendment to neutralize acidic soils, and in the processing of beet sugar. In food production, it is used as a processing aid, pH regulator, and firming agent.
To find the volume of a 2.4 M solution of calcium hydroxide required to yield 14.4 mol, we can use the formula:
moles = concentration x volume
Rearranging the formula to solve for volume, we get:
volume = moles / concentration
Plugging in the given values, we get:
volume = 14.4 mol / 2.4 M
volume = 6 L
Therefore, 6 liters of a 2.4 M solution of calcium hydroxide are required to yield 14.4 mol.
To know more about the Calcium hydroxide, here
https://brainly.com/question/6369990
#SPJ4
Look at the diagram below, which shows an atom of an element. How man valence electrons does it have? Based on this, would the atom be reactive or unreactive? Explain your reasoning.
A broad rule of thumb states that an atom with one, two, three, five, six, or seven valence electrons is reactive, however an atom with four valence electrons may be reactive or unreactive depending on the particular reaction conditions.
What is the name of a diagram that just displays an atom's valence electrons?Since valence electrons are crucial, atoms are frequently depicted by straightforward diagrams that just display their valence electrons. Three of these electron dot diagrams are displayed below.
How do valence electrons determine an element's reactivity?Valence electrons play a major role in determining an atom's chemical reactivity. Atoms with a fully filled valence electron shell have a propensity to be chemically inert. Very reactive atoms have one or two valence electrons.
To know more about electrons visit:-
https://brainly.com/question/28977387
#SPJ1
What is the molarity of a solution containing 72. 0 g of NaOH in 356 mL of solution?
The molarity of the solution is 5.06 M
To find the molarity of a solution, we use the formula:
Molarity = moles of solute / liters of solution
First, we need to find the moles of[tex]NaOH[/tex]in the solution:
moles of [tex]NaOH[/tex] = mass / molar mass
The molar mass of [tex]NaOH[/tex] is 40.00 g/mol (sodium = 22.99 g/mol, oxygen = 15.99 g/mol, hydrogen = 1.01 g/mol).
moles of[tex]NaOH[/tex] = 72.0 g / 40.00 g/mol = 1.80 mol
Next, we need to convert the volume of solution from milliliters to liters:
356 mL = 0.356 L
Now we can calculate the molarity of the solution:
Molarity = 1.80 mol / 0.356 L = 5.06 M
Therefore, the molarity of the solution is 5.06 M
To know more about molarity refer to-
https://brainly.com/question/8732513
#SPJ11
How many joules of energy do you release or lose to turn 460. g of nh3 from a liquid back to a solid?
The energy required to change 460 g of NH₃ from a liquid to a solid is roughly 152.86 kJ.
To calculate the energy released or lost when turning 460 g of NH₃ (ammonia) from a liquid to a solid, we need to determine the amount of heat energy involved in the phase transition. This can be done using the heat of fusion, which is the amount of heat energy required to convert a substance from a solid to a liquid or vice versa.
The heat of fusion of NH₃ is approximately 5.65 kJ/mol. We need to convert the mass of NH₃ to moles to use this value. The molar mass of NH₃ is 17.03 g/mol.
First, we calculate the number of moles of NH₃:
moles = mass / molar mass
moles = 460 g / 17.03 g/mol
moles ≈ 27.01 mol
Next, we calculate the energy released or lost:
energy = moles × heat of fusion
energy = 27.01 mol × 5.65 kJ/mol
energy ≈ 152.86 kJ
Therefore, approximately 152.86 kJ of energy would be released or lost when converting 460 g of NH₃ from a liquid to a solid.
To know more about the solidification refer here :
https://brainly.com/question/21278640#
#SPJ11
what is the major organic product from the addition reaction of hbr to 2-methyl-2-butene? group of answer choices 2-bromopentane 2-bromo-2-methylbutane 1-bromo-2-methylbutane 1-bromo-3-methylbutane 2-bromo-3-methylbutane
The addition of HBr to 2-methyl-2-butene is an example of an electrophilic addition reaction. The correct answer is (2)
The double bond in 2-methyl-2-butene is attacked by the electrophilic H+ ion from HBr, leading to the formation of a carbocation intermediate. The bromide ion (Br-) then attacks the carbocation, leading to the formation of a new carbon-bromine bond. The major organic product obtained from the addition reaction of HBr to 2-methyl-2-butene is 2-bromo-2-methylbutane, which is also known as t-butyl bromide. This is because the addition of HBr occurs at the tertiary carbon, leading to the formation of a tertiary carbocation intermediate, which is relatively stable. Therefore, the correct answer is (2) 2-bromo-2-methylbutane.
To know more about electrophilic addition reaction, here
brainly.com/question/16811879
#SPJ4
--The complete Question is, what is the major organic product from the addition reaction of hbr to 2-methyl-2-butene? group of answer choices
1. 2-bromopentane 2-bromo-2-methylbutane
2. 1-bromo-2-methylbutane
3. 1-bromo-3-methylbutane
4. 2-bromo-3-methylbutane=--
1. A gas takes up a volume of 10 ml, has a pressure of 6 atm, and a temperature of 100 K. What is the new volume of the gas at stp?
2. The gas in an aerosol can is under a pressure of 8 atm at a temperature of 45 C. It is dangerous to dispose of an aerosol can by incineration. (V constant)What would the pressure in the aerosol can be at a temperature of 60 C ?
3. A sample of nitrogen occupies a volume of 600mL at 20 C. What volume will it occupy at STP?(P constant)
The new volume of the gas at STP is 16.36 ml, the pressure in the aerosol at the 60 degree temperature is 9.46 atm and the volume that it will occupy is 557.66 m.
1. We must apply the combined gas law equation to determine the new volume of the gas at STP,
P₁V₁/T₁ = P₂V₂/T₂.
At STP, the pressure is 1 atm and the temperature is 273 K.
Plugging in the values, we get:
6 atm * 10 ml / 100 K = 1 atm * V₂/273 K
V₂ = 16.36 ml (rounded to two decimal places)
2. To find the new pressure of the gas in the aerosol can at a temperature of 60 C, we can use the ideal gas law equation: PV = nRT, where n is the number of moles of gas and R is the gas constant,
P₁/T₁ = P₂/T₂.
Plugging in the values, we get:
8 atm/(45 + 273) K = P₂/(60 + 273) K
P₂ = 9.46 atm (rounded to two decimal places)
3. Using the relation, V₁/T₁ = V₂/T₂. At STP, the temperature is 273 K.
Plugging in the values, we get:
600 ml / (20 + 273) K = V2 / 273 K
V₂ = 557.66 ml (rounded to two decimal places)
To know more about ideal gas equation, visit,
https://brainly.com/question/27870704
#SPJ4
What is the total number of moles, to the nearest tenth, of solute contained in 0. 50 liter of 3. 0 M HCl?
The total number of moles of solute (HCl) in 0.50 L of 3.0 M HCl is 1.5 moles.
To determine the total number of moles of solute in a solution, we can use the formula:
moles of solute = concentration of solution x volume of solution
In this case, we are given that the volume of the solution is 0.50 L and the concentration of the solution is 3.0 M HCl.
Using the formula above, we can calculate the number of moles of HCl in the solution:
moles of HCl = 3.0 M x 0.50 L
moles of HCl = 1.5 moles
This result can be explained by the fact that the concentration of a solution is defined as the amount of solute (in moles) per unit volume of the solution (in liters).
to know more about moles refer here:
https://brainly.com/question/31597231#
#SPJ11
(01. 05 MC)
During an experiment a thermometer was placed in a beaker containing hydrogen peroxide. The following observations were recorded when yeast granules were added to hydrogen peroxide.
Observation 1: Fizzing and bubbling took place.
Observation 2: The temperature began to rise.
Based on the observation, justify the type of change (physical or chemical) that took place
Based on the given observations, a chemical change took place when yeast granules were added to hydrogen peroxide.
Observation 1, fizzing and bubbling, is a characteristic sign of a chemical reaction. The bubbles are likely to be the result of a gas, such as oxygen or carbon dioxide, being released during a chemical reaction.
Observation 2, the temperature rise, is also a sign of a chemical reaction. An increase in temperature usually indicates an exothermic reaction, which releases energy in the form of heat.
Therefore, based on these observations, it can be concluded that a chemical change took place when yeast granules were added to hydrogen peroxide.
To know more about observations refer here
https://brainly.com/question/9679245#
#SPJ11
What is the mass percentage of a solution that contains 152 g of KNO3 in 7.86 kg of water
Answer:
the mass percentage of the solution containing 152 g of KNO3 in 7.86 kg of water is 1.90%.
Explanation:
To find the mass percentage of a solution, we need to divide the mass of the solute by the mass of the solution and then multiply by 100%.
The mass of the solution is the sum of the mass of the solute (152 g) and the mass of the solvent (7.86 kg or 7860 g).
mass of solution = mass of solute + mass of solvent
mass of solution = 152 g + 7860 g
mass of solution = 8012 g
Now, we can calculate the mass percentage:
mass percentage = (mass of solute / mass of solution) x 100%
mass percentage = (152 g / 8012 g) x 100%
mass percentage = 1.90%
the mass percentage of the solution containing 152 g of KNO3 in 7.86 kg of water is 1.90%.
Explain, in terms of the ions present, why potassium bromide must be molten during this electrolysis.
Potassium bromide must be molten during electrolysis to allow the movement of potassium (K+) and bromide (Br-) ions, which are necessary for the conduction of electricity and the subsequent chemical reactions at the electrodes.
In the electrolysis of potassium bromide (KBr), the solid compound must be turned into a molten state for the process to occur efficiently.
This is because, in a solid state, the potassium (K+) and bromide (Br-) ions are held together in a rigid crystal lattice structure, preventing them from moving freely. When KBr is molten, the ionic bonds holding the lattice together are broken, allowing the ions to move independently.
During electrolysis, an electric current is passed through the molten KBr, causing the K+ ions to migrate towards the negative electrode (cathode) and the Br- ions towards the positive electrode (anode).
At the cathode, K+ ions gain electrons and are reduced to potassium metal, while at the anode, Br- ions lose electrons and are oxidized to bromine gas. This movement and reaction of ions are only possible when KBr is in its molten state.
To know more about electrolysis click on below link:
https://brainly.com/question/31726896#
#SPJ11
Micheal has an infection in his sinuses and lungs, but has no sick
time, so goes to work anyway. He is coughing and sneezing the
whole shift and only remembers to cover his nose and mouth about
half the time. Which link represents the break in the chain of
infection in this scenario, placing you at risk of contracting the
infection?
f
Select one:
a.
Reservoir
b.
Infectious agerte
C.
Port of exit
d.
Port of entry
The link that represents the break in the chain of infection in this scenario, placing you at risk of contracting the infection is the Port of entry.
The worker is coughing and sneezing without covering his nose and mouth, which allows the infectious agents to enter the body of others nearby. The Port of entry is the point at which the infectious agents enter the susceptible host, and in this case, it is through inhalation of respiratory droplets from the sick worker. This highlights the importance of proper hygiene practices, such as covering your nose and mouth when coughing or sneezing, to prevent the spread of infectious diseases in the workplace.
Know more about Infection here:
https://brainly.com/question/30759550
#SPJ11
The space between the particles of matter in a dead star is. ?
The space between particles in a dead star is incredibly vast. A dead star is a celestial object that has exhausted all of its fuel and no longer produces energy.
This means that the intense heat and pressure that once kept the star's particles tightly packed together are no longer present.
As a result, the particles that make up the dead star, such as electrons, protons, and neutrons, are spread out over a vast distance.
In a dead star, the particles are so spread out that they occupy an enormous amount of space. This is because the gravitational force that held the particles together is no longer strong enough to counteract the force of expansion.
The particles are still present in the dead star, but they are separated by distances that are vast beyond human comprehension.
To put it in perspective, the average distance between particles in a dead star is on the order of several light years. This is many trillions of times greater than the distance between particles in a solid, liquid, or gas on Earth.
to know more about dead star refer here:
https://brainly.com/question/1953745#
#SPJ11
Outline the best method for preparing the following aldehyde from an appropriate alcohol in one step. Draw the starting alcohol and select the best reagent.
The structure is a 6 carbon ring where carbon 1 is bonded to an aldehyde
To prepare the desired aldehyde with a 6-carbon ring and an aldehyde group on carbon 1, starting with cyclohexanol is a suitable approach.
Cyclohexanol is a 6-carbon ring compound with an alcohol group (OH) attached to carbon 1. To convert the alcohol group into an aldehyde group, the oxidation of the primary alcohol is required.
In this case, the best reagent to use for the oxidation of cyclohexanol to the corresponding aldehyde is PCC (pyridinium chlorochromate).
PCC is a mild oxidizing agent that selectively oxidizes primary alcohols to aldehydes without further oxidation to carboxylic acids. It allows for a controlled oxidation, preventing overoxidation of the aldehyde to a carboxylic acid.
The reaction using PCC as the oxidizing agent can be carried out in one step. The PCC reagent is typically dissolved in a suitable solvent, and the cyclohexanol is added to the reaction mixture.
The reaction proceeds, converting the alcohol group to an aldehyde group while maintaining the 6-carbon ring structure.
By using cyclohexanol as the starting alcohol and PCC as the reagent, you can achieve the desired aldehyde product with a 6-carbon ring and an aldehyde group on carbon 1 in a single step.
This method provides a reliable and efficient way to selectively oxidize the primary alcohol to the corresponding aldehyde without the risk of overoxidation.
To learn more about oxidation, refer below:
https://brainly.com/question/16976470
#SPJ11
Match each decimal number to its equivalent in scientific notation
Decimal number to its equivalent in scientific notation: 15 = 1.5 × 102, 0.015 = 1.5 × 10-2, 0.15 = 1.5 × 10-1, 150 = 1.5 × 101 and 1.5 = 1.5 × 100.
What is notation?Notation is a system of symbols used to represent a set of ideas or concepts. It is used to communicate complex musical, mathematical, and scientific concepts. Notation helps to make information easier to understand and is widely used in many fields. Notation can range from simple symbols such as musical notes, to complex formulas and equations used in mathematics and science. It allows for the efficient and organized communication of ideas and can be used to represent abstract concepts. Notation makes it easier to understand and learn complex topics, and is an important tool for communication.
To learn more about notation
https://brainly.com/question/29130578
#SPJ1
Complete Question:
Match each decimal number to its equivalent in scientific notation
15
1.5
0.015
0.15
150
1.5 × 10-2
1.5 × 101
1.5 × 102
1.5 × 100
1.5 × 10-1
Complex Ion Formation:Cu(NH3)42 Ecell, after adding 6 M NH3to the copper cell 0. 77V. Use the Nernst equation to calculate the concentration of that free copper (II) ion that is in equilibrium with the complexed copper (II) ion, Cu(NH3)42 in the solution. Does the calculated value for the [Cu2 ] make sense (look up the Kf for the formation of Cu(NH3)42 ) and rationalize your findings)
The concentration of free copper (II) ions in equilibrium with Cu(NH₃)₂ is 5.15 x 10⁻¹⁰ M.
1. Write the half-reaction for Cu²⁺ and Cu(NH₃)₂: Cu²⁺ + 2NH₃ ⇌ Cu(NH₃)₂²⁺
2. Use the Nernst equation: E = E° - (0.05916/n) * log(Q)
3. Rearrange for [Cu²⁺]: [Cu²⁺] = 10^((E° - E) * n / 0.05916)
4. Plug in the values: E° = 0.77V, E = 0, n = 2
5. Calculate [Cu²⁺]: [Cu²⁺] = 5.15 x 10⁻¹⁰ M
The calculated value for [Cu²⁺] makes sense, as the Kf for Cu(NH₃)₂ formation is large, indicating a strong complex formation and low [Cu²⁺] concentration.
To know more about Nernst equation click on below link:
https://brainly.com/question/31593791#
#SPJ11
Three students are asked to discuss whether Gibbs Free Energy was positive or
negative for each dissolution. Select the student that employs correct
scientific reasoning.
. Student 1: The Gibbs Free Energy was negative for both reactions because the reactions were
spontaneous, the reactions happened.
• Student 2: The Gibbs Free Energy was positive for the first reaction because it got colder and
negative for the second reaction because it got hotter.
• Student 3: The Gibbs Free Energy was positive for both reactions because it is always positive for
dissolutions.
Student 3
Student 2
Student 1
In the next three problems, use the CER format to answer this guiding
Based on scientific reasoning, the correct student is Student 1.
The Gibbs Free Energy is negative for both reactions because they are spontaneous, meaning they occur naturally without the need for external input. This indicates that the reactions release energy and are thermodynamically favorable.
Student 2's reasoning is incorrect because the temperature change alone does not determine the Gibbs Free Energy.
Student 3's reasoning is also incorrect because the Gibbs Free Energy can be both positive and negative depending on the reaction conditions. Therefore, Student 1's explanation aligns with the laws of thermodynamics and is scientifically accurate.
To know more about Gibbs Free Energy click on below link:
https://brainly.com/question/13318988#
#SPJ11
2n2o5 (g) = 4no2 (g) + o2(g)
if the rate of decomposition of n2o5 at a particular instant in a reaction vessel is 4.2 x 10-7 m/s,
what is the rate of appearance of a) no2 b) o2
The rate of appearance of [tex]NO_{2}[/tex] is 8.4 x [tex]10^{-7}[/tex] m/s and the rate of appearance of [tex]O_{2}[/tex] is 2.1 x [tex]10^{-7}[/tex] m/s.
Given the reaction: 2[tex]N_{2}O_{5}[/tex](g) → 4[tex]NO_{2}[/tex](g) + [tex]O_{2}[/tex](g)
The rate of decomposition of [tex]N_{2}O_{5}[/tex] is 4.2 x [tex]10^{-7}[/tex] m/s.
a) To find the rate of appearance of [tex]NO_{2}[/tex], we will look at the stoichiometric coefficients in the balanced reaction. For every 2 moles of [tex]N_{2}O_{5}[/tex] decomposed, 4 moles of [tex]NO_{2}[/tex] are produced. So, the ratio is 4:2, which simplifies to 2:1.
Rate of appearance of [tex]NO_{2}[/tex] = (Rate of decomposition of [tex]N_{2}O_{5}[/tex]) x (2/1)
Rate of appearance of [tex]NO_{2}[/tex] = (4.2 x [tex]10^{-7}[/tex] m/s) x 2
Rate of appearance of [tex]NO_{2}[/tex] = 8.4 x [tex]10^{-7}[/tex] m/s
b) For the rate of appearance of [tex]O_{2}[/tex], we will again look at the stoichiometric coefficients. For every 2 moles of [tex]N_{2}O_{5}[/tex] decomposed, 1 mole of [tex]O_{2}[/tex] is produced. The ratio is 1:2.
Rate of appearance of [tex]O_{2}[/tex] = (Rate of decomposition of [tex]N_{2}O_{5}[/tex] ) x (1/2)
Rate of appearance of [tex]O_{2}[/tex] = (4.2 x [tex]10^{-7}[/tex] m/s) x 1/2
Rate of appearance of [tex]O_{2}[/tex] = 2.1 x [tex]10^{-7}[/tex] m/s
Thus, the rate of appearance of [tex]NO_{2}[/tex] is 8.4 x [tex]10^{-7}[/tex] m/s and the rate of appearance of [tex]O_{2}[/tex] is 2.1 x [tex]10^{-7}[/tex] m/s.
To know more about rate of reaction visit:
https://brainly.com/question/30546888
#SPJ11
1. Using the "octet rule," write the Lewis structures for the following molecules: (a) CH2Cl2 (b) NCl3 (c) CS2 and (d) CH3CHCHCH3 2. The following questions refer to the bolded carbon atom in the molecule: CH3CHCHCH3 a) How many areas of high electron density (number of bonded atoms plus number of lone pairs) surround the indicated C? b) Give the AXmEn notation for the C in this molecule (Look on page 6 of this experiment) c) What is the molecular geometry for the C in this molecule? d) What are the bond angles surrounding C? 3. While obeying the octet rule, nitric acid HNO3, has two resonance structures. Draw them. (Hint: the hydrogen atom is bonded to one of the oxygen atoms)
1. Using the "octet rule," I will write the Lewis structures for the following molecules:
(a) CH₂Cl₂: H-Cl:C-H
|
Cl
(b) NCl₃: Cl
|
Cl-N-Cl
(c) CS₂: O=C=S=O
(d) CH₃CHCHCH₃: CH₃-CH-CH-CH₃
2. For the bolded carbon atom in the molecule CH₃CHCHCH₃:
a) There are 3 areas of high electron density surrounding the indicated C (3 bonded atoms and 0 lone pairs).
b) The AXmEn notation for the C in this molecule is AX₃E₀, where m=3 and n=0.
c) The molecular geometry for the C in this molecule is trigonal planar.
d) The bond angles surrounding C are approximately 120 degrees.
3. Obeying the octet rule, nitric acid (HNO₃) has two resonance structures. They can be drawn as:
Resonance Structure 1: O=N-O-H
||
O
Resonance Structure 2: O-N=O
||
O-H
Let us learn more in detail.
1.
(a) CH₂Cl₂: Carbon is the central atom with two hydrogen atoms and two chlorine atoms attached. The Lewis structure would be:
Cl H
| |
C-H-C-Cl
| |
H Cl
(b) NCl₃: Nitrogen is the central atom with three chlorine atoms attached. The Lewis structure would be:
Cl
|
Cl-N-Cl
|
Cl
(c) CS₂: Carbon is the central atom with two sulfur atoms attached. The Lewis structure would be:
S=C=S
(d) CH₃CHCHCH₃: Carbon is the central atom with three methyl groups and one hydrogen atom attached. The Lewis structure would be:
H H H
| | |
H-C-C-C-H
| | |
H H CH₃
3. The two resonance structures for nitric acid HNO₃ would be:
O-H O
| |
H-O=N O=N-O
| |
O O-H
Learn more about the octet rule at https://brainly.com/question/865531
#SPJ11
Check all the following combinations of elements that would not form a covalent bond.
1. C and H
2. N and CI
3. S and CI
4. Na and O
5. Cu and O
To determine which of these combinations would not form a covalent bond, we need to examine the nature of the elements involved. Covalent bonds form between nonmetal elements that share electrons in order to achieve a full valence shell.
1. C and H: Both are nonmetals, so they can form a covalent bond.
2. N and Cl: Both are nonmetals, so they can form a covalent bond.
3. S and Cl: Both are nonmetals, so they can form a covalent bond.
For combinations 4 and 5, one of the elements is a metal:
4. Na and O: Na is a metal, and O is a nonmetal. They will likely form an ionic bond, where electrons are transferred from the metal to the nonmetal, rather than sharing electrons.
5. Cu and O: Cu is a metal, and O is a nonmetal. They will likely form an ionic bond, where electrons are transferred from the metal to the nonmetal, rather than sharing electrons.
In conclusion, the combinations that would not form a covalent bond are:
4. Na and O
5. Cu and O
To know more about Covalent bonds refer here
https://brainly.com/question/19382448#
#SPJ11
What is the correct equilibrium expression for the dissociation of the base pyridine:
C5H5N + H2O â C5H5NH+ + OH-
A. Kb = [C5H5NH+][OH-] / [C5H5N]
B. Kb = [C5H5N][OH-] / [C5H5NH+][H2O]
C. Kb = [C5H5NH+][OH-] / [C5H5N][H2O]
D. Kb = [C5H5NH+][C5H5N] / [OH-]
E. Kb = [C5H5N][OH-] / [C5H5NH+]
The correct equilibrium expression for the dissociation of the base pyridine is: C₅H₅N + H₂O ↔ C₅H₅NH+ + OH- is A. Kb = [C₅H₅NH+][OH-] / [C₅H₅N]. The correct option is A.
The equilibrium expression for the reaction of a weak base with water is Kb = [BH+][OH-] / [B], where BH+ is the conjugate acid of the weak base B. In this case, pyridine (C₅H₅N) is the weak base, and its conjugate acid is C₅H₅NH+.
The concentration of water is assumed to be constant and is not included in the equilibrium expression. Therefore, the equilibrium expression for the dissociation of pyridine is Kb = [C₅H5₅H+][OH-] / [C₅H₅N].
Option A is the correct expression since it follows the correct form for the equilibrium expression of a weak base with water. Option B has the concentrations of water and the conjugate acid of the weak base in the denominator, which is incorrect. Option C has the concentration of water in the denominator, which is incorrect.
Option D has the concentration of hydroxide ions (OH-) in the denominator, which is incorrect. Option E has the concentrations of the weak base and its conjugate acid in the denominator, which is also incorrect. Hence option A is the correct option.
To know more about pyridine, refer here:
https://brainly.com/question/31385286#
#SPJ11
A container has 0.182 mol of CO₂ gas at STP. How many liters does the gas take up?
Answer:
4.08 L
Explanation:
At standard temperature and pressure, a mole of any gas equals 22.4 L.
We have 0.182 mol of CO₂ gas. We know that every mole of gas is 22.4 L, so
[tex]0.182mol*\frac{22.4L}{1mol} =4.08L[/tex]
⇒ 4.08 L of CO₂ is the answer
SI Unit: Volume = 4.133 L of carbon dioxide
Non-SI Unit: Volume = 4.079 L carbon dioxide
Molar Volume of Gases:At STP conditions (Standard Temperature and Pressure), which is conditions at 100 kPa and at 0°C or 273.15 K, it is a given that the volume of 1 mole of ideal gas is 22.71 L.
[tex]\large \textsf{$\therefore$ if 1 mol of CO$_2$ = 22.71 L}\\\\\large \textsf{hence, 0.182 $\times$ 1 mol of CO$_2$ = 22.71 $\times$ 0.182}\\\\\large \textsf{$\implies$ \boxed{\boxed{$volume = 4.133 L of CO$_2}}}[/tex]
Note: The value used for pressure above, 100 kPa (kilopascals), is a standard SI unit (International System of Units), used by most countries around the world.
However, another commonly used value for pressure (though not the preferred SI unit), is 1 atm (atmospheric pressure), which is equivalent to 101.325 kPa.
Using this value, the volume of 1 mole of ideal gas at STP is then 22.41 L. Solving this:
[tex]\large \textsf{if 1 mol of CO$_2$ = 22.41 L}\\\\\large \textsf{$\therefore$ 0.182 $\times$ 1 mol of CO$_2$ = 22.41 $\times$ 0.182}\\\\\large \textsf{$\implies$ \boxed{\boxed{$volume = 4.079 L CO$_2}}}[/tex]
To learn more about Standard Temperature and Pressure Conditions:
https://brainly.com/question/2783971
How many moles of ammonia are produced when 4. 8 moles of nitrogen react with hydrogen? N2 + 3H2 — 2NH3
9.6 moles of ammonia are produced when 4.8 moles of nitrogen react with hydrogen.
To answer this question, we will use the balanced chemical equation provided: N2 + 3H2 — 2NH3. From this equation, we can see that for every 1 mole of nitrogen that reacts, 2 moles of ammonia are produced.
So, to determine how many moles of ammonia are produced when 4.8 moles of nitrogen react with hydrogen, we will first need to calculate how many moles of nitrogen are present in the reaction.
Since the coefficient for nitrogen is 1 in the balanced equation, we know that the number of moles of nitrogen is equal to 4.8.
Now we can use the mole ratio from the balanced equation to determine the number of moles of ammonia produced.
For every 1 mole of nitrogen, 2 moles of ammonia are produced, so we can set up a ratio:
1 mole of nitrogen : 2 moles of ammonia
Using the number of moles of nitrogen we calculated earlier (4.8 moles), we can multiply it by the ratio to find the number of moles of ammonia produced:
4.8 moles of nitrogen x 2 moles of ammonia / 1 mole of nitrogen = 9.6 moles of ammonia
Therefore, 9.6 moles of ammonia are produced when 4.8 moles of nitrogen react with hydrogen.
To know more about ammonia, visit:
https://brainly.com/question/31525313#
#SPJ11
Explain why the combustion of biomass releases no net carbon into the atmosphere
Biomass is organic matter that comes from recently living plants and animals. When biomass is burned, it releases carbon dioxide into the atmosphere.
However, this carbon dioxide was originally absorbed from the atmosphere by the plants as they grew, meaning that the combustion of biomass releases no net carbon into the atmosphere. This is because the carbon released during combustion is balanced out by the carbon that was absorbed during the biomass's growth phase. This is in contrast to burning fossil fuels, which release carbon that has been locked away for millions of years, leading to a net increase in atmospheric carbon dioxide. Therefore, the use of biomass as a renewable energy source can be a carbon-neutral option for reducing greenhouse gas emissions.
To know more about Biomass:
https://brainly.com/question/21525417
#SPJ11
The reaction between propionyl chloride and acetate ion is outlined. Starting material 1 is a carbonyl bonded to chloride and an ethyl group. Starting material 2 is a carbonyl bonded to a methyl group and O minus, which has three lone pairs. A) Complete the mechanism of the forward reaction by placing curved arrows to show the electron movements in the reactants and intermediate product
An enol intermediate and a chloroalkoxide are byproducts of reaction between Starting Material 1, which is carbonyl bonded to a chloride and an ethyl group, and Starting Material 2, which is carbonyl bonded to a methyl group and O minus with three lone pairs.
This reaction takes place in the presence of a Lewis acid catalyst. Starting Material 1's carbonyl carbon is attacked by the methyl group, which is followed by a proton transfer and tautomerization to produce the enol intermediate. Following the enol's attack on the carbonyl carbon in Starting Material 2, chloroalkoxide product is created. Curved arrows depicting movements of electrons in reactants and intermediate products can be used to complete the mechanism of the forward reaction.
To know more about Lewis acid catalyst, here
brainly.com/question/31485158
#SPJ4
--The complete Question is, What product is formed when Starting Material 1 reacts with Starting Material 2 in the presence of a Lewis acid catalyst, and complete the mechanism of the forward reaction by placing curved arrows to show the electron movements in the reactants and intermediate product? --
What is the concentration of KBr in a solution prepared by mixing 0. 200 L of 0. 053 M KBr with
0. 550 L of 0. 078 M KBr?
The concentration of KBr in the solution prepared by mixing 0.200 L of 0.053 M KBr with 0.550 L of 0.078 M KBr is 0.0713 M.
The concentration of KBr in the solution can be calculated using the formula:
Concentration = (moles of solute) / (volume of solution in liters)
First, we need to find the moles of KBr in each solution by multiplying the volume of the solution by its molarity:
0.200 L x 0.053 M = 0.0106 moles KBr
0.550 L x 0.078 M = 0.0429 moles KBr
Next, we need to add the moles of KBr from each solution to find the total moles of KBr in the final solution:
0.0106 moles KBr + 0.0429 moles KBr = 0.0535 moles KBr
Finally, we can use the total moles of KBr and the total volume of the solution (which is the sum of the two volumes used) to calculate the concentration:
Concentration = 0.0535 moles / (0.200 L + 0.550 L)
Concentration = 0.0535 moles / 0.750 L
Concentration = 0.0713 M
Therefore, the concentration of KBr in the solution prepared by mixing 0.200 L of 0.053 M KBr with 0.550 L of 0.078 M KBr is 0.0713 M.
To know more about KBr, visit:
https://brainly.com/question/18248722#
#SPJ11
Which of the following is a product in the chemical equation?
2Al(s) + 6HCl(aq) → 2AlCl3(aq) + 3H2(g)
A. AlCl3
B. Al
C. HCl
D. Both AlCl3 and Al are products.
Answer:
d
Explanation:
N2 + 3H2 + 2NH3
If 15L of hydrogen gas is available for the Reaction above, what volume of NH3 will be formed
The volume of NH₃ that will be formed is determined as 10.1 L.
What is the volume of the gas?The volume of NH₃ formed is calculated by applying ideal gas law as follows;
PV = nRT
where;
P is the pressureV is the volumen is the number of molesR is the gas constantT is the temperature.[tex]n = \frac{PV}{RT}\\\\n = \frac {(1 \ atm)(15\ L)}{(0.0821 \ L atm/mol. K)(273 \ K)}[/tex]
n = 0.67 moles of H₂
The number of moles of NH₃ is calculated as;
n(NH₃) = (2/3) n(H₂)
= (2/3) (0.67 mol)
= 0.45 mol
The volume of NH₃ gas is calculated as;
[tex]n(NH_3) = \frac{PV}{RT} \\\\V(NH_3) = \frac{n(NH_3)RT}{P}[/tex]
[tex]= \frac{(0.45 \ mol)(0.0821 \ L atm/mol .K)(273\ K)}{(1 \ atm) }[/tex]
= 10.1 L
Learn more about volume of gas here: https://brainly.com/question/25736513
#SPJ1
Calculate the pH of 0. 10 M solution of hypochlorous acid, HOCl, Ka = 2. 9 x 10-8
The pH of a 0.10 M solution of hypochlorous acid with a Ka value of 2.9 x 10-8 is approximately 4.77.
Hypochlorous acid, also known as HOCl, is a weak acid that can dissociate in water to form hydrogen ions (H+) and hypochlorite ions (OCl-). The dissociation constant of HOCl, also known as Ka, is a measure of the strength of the acid. In this case, the Ka value of HOCl is 2.9 x 10-8.
To calculate the pH of a 0.10 M solution of HOCl, we need to use the Ka value and the expression for the equilibrium constant:
Ka = [H+][OCl-]/[HOCl]
We can assume that the concentration of HOCl at equilibrium is equal to the initial concentration, since it is a weak acid and only partially dissociates. We also know that the concentration of H+ is equal to the concentration of the acid that dissociated, so we can substitute these values into the expression:
Ka = [H+]^2/[HOCl]
[H+]^2 = Ka x [HOCl]
[H+]^2 = 2.9 x 10-8 x 0.10
[H+] = 1.7 x 10-5 M
Now that we have calculated the concentration of H+, we can use the pH equation to find the pH:
pH = -log[H+]
pH = -log(1.7 x 10-5)
pH = 4.77
Therefore, the pH of a 0.10 M solution of hypochlorous acid with a Ka value of 2.9 x 10-8 is approximately 4.77.
To know more about hypochlorous acid , visit:
https://brainly.com/question/16984896#
#SPJ11