Why does precipitation
occur when warm air rises?

Answer:

C

Explanation:

The magnitude of the electric field for 60 cm is 6.49 × 10^5 N/C

R(radius of the solid sphere)=(60cm)( 1m /100cm)=0.6m

[tex]Q\;(\text{total charge of the solid sphere})=(26\;\mathrm{\mu C})\left(\dfrac{1\;\mathrm{C}}{10^6\;\mathrm{\mu C}} \right)={26\times 10^{-6}\;\mathrm{C}}[/tex]

Since the Gaussian sphere of radius r>R encloses all the charge of the sphere similar to the situation in part (c), we can use Equation (6) to find the magnitude of the electric field:

[tex]E=\dfrac{Q}{4\pi\epsilon_0 r^2}[/tex]

Substitute numerical values:

[tex]E&=\dfrac{24\times 10^{-6}}{4\pi (8.8542\times 10^{-12})(0.6)}\\ &={6.49\times 10^5\;\mathrm{N/C}\;\text{directed radially outward}}}[/tex]

The spherical Gaussian surface is chosen so that it is concentric with the charge distribution.

As an example, consider a charged spherical shell S of negligible thickness, with a uniformly distributed charge Q and radius R. We can use Gauss's law to find the magnitude of the resultant electric field E at a distance r from the center of the charged shell. It is immediately apparent that for a spherical Gaussian surface of radius r < R the enclosed charge is zero: hence the net flux is zero and the magnitude of the electric field on the Gaussian surface is also 0 (by letting QA = 0 in Gauss's law, where QA is the charge enclosed by the Gaussian surface).

Learn more about Gaussian sphere here:

https://brainly.com/question/2004529

#SPJ4

Answer:

A horse pulls a cart, a person walks on the ground

Explanation:

Answer:

Know it's late but I couldn't find a good answer when I looked for it so i did it myself.

My answer:

One of the real world examples mentioned in the article was that of a rocket blasting off into space. It was explained that it's an example of Newton's third law because the rocket’s engines push on those gases (action force), and the gases push back (reaction force). This reaction shows an excellent example of Newton's third law.

Sample Response:

When gases escape downward out the tail of a rocket, they push upward on the rocket. When layers of the Earth collide, they force the Earth upward, forming mountains.

Explanation:

hope this helps <3

In other words, it would take Deep Space 1 more than 81,000 years to travel the 4.24 light-years between Earth and Proxima Centauri at its top speed of 56,000 km/h. In relation to human history, that would be more than 2,700 generations.

Nearly 40 trillion kilometers, or 4.4 light-years, separate us from Alpha Centauri. The NASA-Germany Helios probes, the fastest spacecraft to date to be launched into orbit, flew at a speed of 250,000 kilometers per hour. The probes would need 18,000 years to travel at such pace to arrive at the sun's nearest neighbor. The calculations reveal that it is almost impossible to reach the nearest star in a human lifetime, even with the most futuristic technologies.

Learn more about Light year here-

https://brainly.com/question/1302132

#SPJ4

Answer:

true

Explanation:

Inertia. Sometimes this first law of motion is referred to as the law of inertia. Inertia is the property of a body to remain at rest or to remain in motion with constant velocity.

hope you will like explanation and give me brainlist

Answer:

its b

Explanation:

Supplements labeled “natural” may interact negatively with medications. The correct option is B.

Dietary supplements are substances that you may use to supplement your diet with nutrients or to reduce your risk of health problems such as osteoporosis or arthritis.

Dietary supplements are available in pill, capsule, powder, gel capsules and tablets, extracts, or liquid form.

Dietary supplements are available in a variety of forms, including tablets, capsules, gummies, powders, drinks, and energy bars.

Vitamins D and B12 are popular supplements, as are minerals like calcium and iron, herbs like echinacea and garlic, and products like glucosamine, probiotics, and fish oils.

Because many supplements contain active ingredients that have strong effects in the body, herbal products can pose unexpected risks. Natural supplements may have negative interactions with medications.

Thus, the correct option is B.

For more details regarding nutritional dietary supplement, visit:

https://brainly.com/question/3653261

#SPJ2

Answer:

The atomic model, the structure of the solar system, and the theory of black holes are examples of models created using indirect evidence.

Explanation:

I have no explanation sorry.

Indirect evidence is based on inference. The atomic structure, the structure of the solar system, and the theory of black holes are all based on indirect evidence.

In studying the structure of the atom, we do not directly observe the sub-atomic particles rather we draw inferences from several experiments and make conclusions. This is indirect evidence.

The solar system can be studied using several astronomical instruments that aid us in making useful inferences regarding the solar system.

The weight of evidence that substantiate the existence of black holes have also been amassed through indirect evidence.

Learn more; https://brainly.com/question/13238701

Answer:

-49.49

Explanation:

If there’s no air resistance then the only thing acting on the object is the force of gravity which is mass times gravity. And to get mass all we have to do is divide 50.5/10 then times that by -9.8 since that’s the force of gravity.

Answer: The answer would be 50.5 N.

Explanation: It’s because there’s no air resistance.

Answer:

It takes 0.416 seconds to hit the ground.

Explanation:

speed = distance/ time

12 = 5/ x (multiply both with x)

12x = 5 (÷ 12)

x = 0.416 s

Answer:

Proxima Centauri is a small, low-mass star located 4.244 light-years (1.301 pc) away from the Sun in the southern constellation of Centaurus. Its Latin name means the "nearest [star] of Centaurus". This object was discovered in 1915 by Robert Innes and is the nearest-known star to the Sun.

Star system: Alpha Centauri

Category: Star, Flare star

Constellation: Centaurus

Discoverer: Robert T. A. Innes

Explanation:

u should make it into an essay

The density in g/cm³ of the cube is 2.70 g/cm³.

We need to know about density to solve this problem. Density is a unit that measures how dense the object is. It can be determined as mass divided by volume

ρ = m / V

where ρ is density, m is mass and V is volume.

From the question above, we know the cube have:

l = 2.65 cm

m = 50.3 gram

Find the volume of cube

V = l³

V = 2.65³

V = 18.61 cm³

Determine the density

ρ = m / V

ρ = 50.3 / 18.61

ρ = 2.70 g/cm³

Find more on density at: https://brainly.com/question/6838128

#SPJ4

The strain in the rod is [tex]2.37\times 10^{-3}[/tex]

Given:

Young's modulus, Y = [tex]20 \times 10^{10}\;N/m^{2}[/tex]

Steel density, [tex]\rho = 7.86 \times 10^{3}\;kg/m^{3}[/tex]

Length of the rod, L = 80 cm = 0.800m

The speed of the wave in the rod is,

[tex]$v = \sqrt{\frac{Y}{\rho}} = \sqrt{\frac{20\times 10^{10}\ \mathrm{N/m^2}}{7.86\times 10^3\ \mathrm{kg/m^3}}} = 5044\ \mathrm{m/s}$[/tex]

Hence the time taken by the wave to travel the end of the rod is,

[tex]$t=\frac{L}{v} = \frac{0.800\ \mathrm{m}}{5044\ \mathrm{m/s}} = 1.58\times 10^{-4}\ \mathrm{s}$[/tex]

The velocity of the rod is, [tex]$v_r = 12.0\ \mathrm{m/s}$[/tex]

The other end will keep moving after the front end hits the wall until the wave reaches the other end, given the period determined by the above problem.

As a result, before the wave reaches the end of the rod, it has traveled a distance of

[tex]$\Delta L = v_r t = (12.0\ \mathrm{m/s}) (1.58\times\ \mathrm{s}) = 1.90\times 10^{-3}\ \mathrm{m} = 1.90\ \mathrm{mm}$[/tex]

The strain in the rod is given by,

[tex]$\frac{\Delta L}{L} = \frac{1.90\times 10^{-3}\ \mathrm{m}}{0.800\ \mathrm{m}} = 2.37\times 10^{-3}[/tex]

Hence, the strain in the rod is [tex]2.37\times 10^{-3}[/tex].

In terms of physics, strain is defined as the fractional modification of configuration.

A system's reaction to an applied stress is called a strain, according to 2. A force that loads a material results in a stress that leads to deformation. Formula for a strain

Change in configuration equals strain first arrangement

It is a dimensionless quantity that lacks a unit.

Change in object size / original object size is known as strain.

It is a quantity without units or dimensions.

Strain kind.

Object length change divided by starting object length equals longitudinal strain.

L/L stands for longitudinal strain.

Change in object volume divided by starting object volume equals longitudinal strain

To know more about Strain visit:

https://brainly.com/question/19317733

#SPJ4

Answer:

the circles are called Sun spots.  they are colder than the surrounding area.

Explanation:

Answer:

The circled areas are called__Sunspots___. They are___colder____ the surrounding area.

Explanation:

i just took the test it is correst plz give me a thanks or a brainiest and ill give 1 back :D

The amplitude of the resultant wave in terms of the common amplitude [tex]y_m[/tex] of the two combining waves which are out of phase by [tex]\frac{\pi}{2} \ \text{rad}[/tex] is [tex]\sqrt{2} y_m[/tex].

The amplitude of two waves interfering with each other depends on the principle of superposition.

Since, the waves are out of phase by [tex]\frac{\pi}{2} \ \text{rad}[/tex] so we can write the waves to be:

[tex]y_1=Asin(kx-\omega t)[/tex]

[tex]y_2=Asin(kx-\omega t+\frac{\pi}{2})\\ \therefore y_2=Acos(kx-\omega t)[/tex]

According to the principle of superposition, the resultant wave is written as:

[tex]y=y_1+y_2[/tex]

[tex]\Rightarrow y=A[sin(kx-\omega t)+cos(kx-\omega t)]\\\Rightarrow y=\sqrt{2}A[\frac{1}{\sqrt{2}}sin(kx-\omega t)+\frac{1}{\sqrt{2}}cos(kx-\omega t)]\\y=\sqrt{2}Asin(kx-\omega t+ \frac{\pi}{4})[/tex]

So from the above relation, we have the amplitude to be:

New Amplitude = [tex]\sqrt{2}A[/tex]

Hence, the amplitude of the combined waves is [tex]\sqrt{2}A[/tex].

To learn more about Attention here:

https://brainly.com/question/15711817

#SPJ4

Answer:

trasvere wave

Explanation:

first one

Answer:

U^U

Explanation:

Two-dimensional vectors have two components: an x vector and a y vector. Each of these vector components is a vector in the direction of one axis. The sum of the components of vectors is the original vector. Three-dimensional vectors have a z component as well.

The three different paper airplane designs were created by Ricardo. In an effort to determine which design flies the farthest, Ricardo intends to fly each paper airplane five times. Following each flight, Ricardo should measure the distance flown by the aircraft and note it.

Two of the most frequent techniques used in agricultural surveying involve measuring angles and distances with basic tools. even when the tools are basic. With diligence and practice, a great degree of precision can be attained.

The (1) pace is the main technique for gauging distance. 2) The odometer. (3) chaining or taping. four stages. optical range finder, number 5. and (6) techniques for electronic distance measurement (EDM).

It will be beneficial to review the standard units of distance first (displacement). The following are the standard English units:

12 inches make up one foot (in)

Yd (yard) = 3 feet (ft)

1 rod is equal to 16.5 feet and 5.5 yards (yd)

A mile is equal to 5280 feet, 1760 yards, and 320 rods.

When converting between different units of measurement, the units cancellation approach comes in quite handy.

To know more about yard visit: https://brainly.com/question/14516546

#SPJ4

Newton's Second Law of Motion states "The rate of change of momentum of a body is directly proportional to the applied unbalanced force in the direction of force".

Answer:

[tex]v_x=34 m/s[/tex]

[tex]v_y=53.9\ m/s[/tex]

Explanation:

Horizontal Launch

When an object is thrown horizontally with a speed v from a height h, it describes a curved path ruled by gravity until it eventually hits the ground.

The horizontal component of the velocity is always constant because no acceleration acts in that direction, thus:

vx=v

The vertical component of the velocity changes in time because gravity makes the object fall at increasing speed given by:

[tex]v_y=g.t[/tex]

The horizontal component of the velocity is always the same:

[tex]v_x=34 m/s[/tex]

The vertical component at t=5.5 s is:

[tex]v_y=9.8*5.5=53.9[/tex]

[tex]v_y=53.9\ m/s[/tex]

Answer:

The net force acting on the mass is 16.523 N

Explanation:

The given mass of the object, m = 1.3 kg

The length of the inclined plane over which the mass slides = 8.7 × 10⁻¹ m

The time it takes the mass to slide = 0.37 s

Therefore, we apply the following kinematic equation of motion;

s = u·t + 1/2·a·t²

Where;

u = The initial velocity of the mass = 0 m/s

t = The time taken for the motion = 0.37 s

a = The acceleration

s = The distance moved in the motion = 8.7 × 10⁻¹ m = 0.87 m

Plugging in the values gives;

0.87 = 0 × t + 1/2 × a × 0.37²

∴ 0.87 = 1/2 × a × 0.37²

a = 0.87/(1/2 × 0.37²) ≈ 12.71 m/s²

The net force acting on the mass is F = Mass, m × Acceleration, a force = m × a

Therefore, the net force acting on the mass is F = 1.3 × 12.71 = 16.523

The net force acting on the mass, F = 16.523 N.

The net force acting on the mass along the incline is 16.523 N

From the information given:

According to the second equation of motion;

[tex]\mathbf{S = ut + \dfrac{1}{2}at^2}[/tex]

the initial velocity u = 0 m/s since the mass starts from the rest

∴

[tex]\mathbf{S =0(t) + \dfrac{1}{2}at^2}[/tex]

[tex]\mathbf{S = \dfrac{1}{2}at^2}[/tex]

2S = at²

[tex]\mathbf{a = \dfrac{2S}{t^2}}[/tex]

[tex]\mathbf{a = \dfrac{2\times 0.87 \ m}{0.37^2}}[/tex]

acceleration (a) = 12.71 m/s²

The net force now acting on the mass along the incline can now be estimated as:

[tex]\mathbf{F_{net} = ma}[/tex]

[tex]\mathbf{F_{net} = 1.3 \ kg \times 12.71 \ m/s^2}[/tex]

[tex]\mathbf{F_{net} = 16.523 \ N}[/tex]

Therefore, we can conclude that the net force acting on the mass along the incline is 16.523 N

Learn more about inclined planes here:

https://brainly.com/question/14983337?referrer=searchResults

The ranking of the measurement from the largest to the smallest is 11.6 mg > 0.000006 kg > 1021 µg > 0.31 mg.

Ranking of measurement is a classification that describes the nature of information within the values assigned to variables.

This is usually done based on the size of each item in the list of measurement.

11.6 mg = 0.0116 g

1021 µg = 0.001021 g

0.000006 kg = 0.006 g

0.31 mg = 0.00031 g

Thus, the ranking of the measurement from the largest to the smallest is 11.6 mg > 0.000006 kg > 1021 µg > 0.31 mg.

Learn more about measurement ranking here: https://brainly.com/question/17350601

#SPJ1

Answer:

B. Applied

Explanation:

Applied means that somethings is pushing directly into it like a person to a box. and well the reasons why the others are not contact force are because gravity its cause to an attraction to the planet and no matter where you are it will still attract you, electric is not because it can flow through air, magnetic it affects to an invisible field that even if its not torching the marital you can still feel the magnetic push or pull

So applied

Adding the rise time and fall time then the package to reach the ground in 3.647 second.

Time can be defined in the sence as,that it is a continued sequence of existence and events that occurs in an apparently irreversible succession from the past, through the present, into the future.

We are given that ,

The packege 's trajectory into a rise to maximum height and fall from there to the ground .Rise to maximum height begins at vertical position is  given as,

Vertical position of the helicopter = H₀ = 20 m,

Initial velocityof helicopter = u = 14 m/s upward

Covered time of the helicopter =t₁ = 0,

Acceleration under gravity of helicoper=(- a) = -9.81 m/s²

Rise ends when instantaneous velocity v = 0,

Therefore, from the equation of motion for velocity as a function of time is  written as ,

v = a + at

0 = 14 m/s - (9.81 )m/s² t₁

t₁ = 1.427sec

Thus , the velocity changes linearly over time t₁ sec from u = 0 m/s then the averaging velocity can be given by w i.e.

w = u /2 = (14m/s)/2

w = 7 m/s

Therefore, maximum height of packege is given as,

H₁ = H₀ + w × t₁

H₁ =20m + 9.81m/s (1.427)s

H₁ = 33. 998 m

Therefore, when the packege fall from maximum height begins at ,

Time= t₁ = 0,

Position= h = H₁

Velocity= u = 0, and

Acceleration due to gravity downward=(-a) = -9.81 m/s²

Thus the  equation of motion for position (s) as a function of initial position (h) is can be written as,

s = h + ut₁ + (1/2) at₂²

0 = H₁ + 0 + (1/2) (-9.81)t₂²

t₂² = 4. 890 s

t₂ = 2.21 s

Hence , on adding the rise time t₁ and fall time t₂

Total time T = t₁ + t₂

T = 1.427 s + 2.21s = 3.647 s

Thus, then the package to reach the ground in 3.647 second.

To know more about time

https://brainly.com/question/1581463

#SPJ1

Considering a scenario in which the Sun is going to explode.

In order to escape the explosion, we depart in a spacecraft with a speed of v = 0.8c.

The star Tau Ceti is 12 life years away.

At the midpoint of the journey, the Sun as well as Tau Cetik explode. at the same instant.

Imagine a hermit who is immobile with respect to both the Sun and Tau Ceti and resides on an asteroid that is midway between both. He observes the blast waves of both explosions as our spaceship passes him. This observer concludes that the two stars blew up simultaneously because he believes both stars to remain stationary.

In the frame of reference, the Sun and Tau Ceti explode at the same time and will remain stationary.

Learn more about the frame of reference here:

brainly.com/question/10962551

#SPJ4

Answer: c

Explanation:

Current is the flowing charges that goes around p.d increases it.

Answer:ture

Explanation:

He should repeat the test with three additional batteries of varying voltages to demonstrate the reproducibility of results. he should use only one battery but do several trials, using different circuit designs to ensure he has appropriate test groups - this can improve the student's experiment.

Reproducibility, otherwise called replicability and repeatability, is a significant rule supporting the logical technique. For the discoveries of a review to be reproducible implies that results got by an examination or an observational review or in a factual investigation of an informational index. Albeit numerous organic researchers instinctively accept that the reproducibility of a trial implies that it tends to be repeated, Drummond makes a differentiation between these two terms. Informational indexes are huge and calculations are more refined. This requests reproducibility to decrease the mistake and predisposition when people are added to the course of information investigation.

Learn more about reproducibility, refer:

https://brainly.com/question/16930523

#SPJ4

Answer:

Explanation:

The acceleration of an object given it's mass and the force acting on it can be found by using the formula

[tex]a = \frac{f}{m} \\ [/tex]

m is the mass

f is the force

From the question we have

[tex]a = \frac{56}{7} \\ [/tex]

We have the final answer as

Hope this helps you

Answer:

it's a

Explanation:

Answer:

I believe its D!

Explanation:

Kenetic energy is motion