Why does c14 have 8 neutrons?

Mendeleev is given the most credit for the concept of a periodic table of the elements because he emphasized its usefulness in predicting the existence and properties of unknown elements.

This is referred to as a tabular arrangement of the chemical elements by increasing atomic number which displays the elements so that one may see trends in their properties.

It consists of a rows and columns arrangement of the chemical elements and each they are grouped according ti the similar features which are present in the elements.

Mendeleev was the scientist who was given the most credit for the concept of a periodic table of the elements despite others working on it previously as a result of his emphasis in its usefulness in predicting the existence and properties of unknown elements.

Read more about Periodic table here https://brainly.com/question/1173237

#SPJ1

Carbon 1: δ = 2.09 ppm (The C1 atom is a methyl group, and is in a tertiary environment, which typically corresponds to a chemical shift of around 2.09 ppm).

Chemical shift is a term used in NMR spectroscopy to describe the relative difference in the resonance frequency of a nucleus in a molecule compared to a reference frequency.

2. Carbon 2: δ = 11.81 ppm (This is the carbonyl carbon, and is in a sp2 hybridized environment, which typically corresponds to a chemical shift of around 11.81 ppm).
3. Carbon 3: δ = 13.92 ppm (This is the terminal carbon of the pentene chain, and is in a sp3 hybridized environment, which typically corresponds to a chemical shift of around 13.92 ppm).
4. Carbon 4: δ = 16.53 ppm (The C4 atom is a methylene group, and is in a secondary environment, which typically corresponds to a chemical shift of around 16.53 ppm).
5. Carbon 5: δ = 17.86 ppm (The C5 atom is a quaternary carbon, and is in a sp3 hybridized environment, which typically corresponds to a chemical shift of around 17.86 ppm).

To learn more about chemical shift
https://brainly.com/question/8171972
#SPJ4

The three missing elements in the periodic table are gallium, germanium and scandium.

Gallium, germanium, and scandium have been all unknown in 1871, however, Mendeleev left areas for every and expected their atomic loads and different chemical properties. Within 15 years, the “lacking” factors have been discovered, conforming to the simple traits Mendeleev had recorded. Scientists in Japan suppose they have eventually created the elusive detail 113, one of the lacking gadgets at the periodic table of factors. Element 113 is an atom with 113 protons in its nucleus — a kind of depend that should be created inner a laboratory as it isn't always located evidently on Earth.

The elements are gallium, germanium and scandium.

To learn more about periodic table check the link below:

https://brainly.com/question/15987580

#SPJ4

The two quantities in this module for which we will develop unit factors to do dimensional analysis with chemical substances are mass (m) and volume (V).

To calculate the unit factor, we need to divide the unit of the desired quantity by the unit of the given quantity. For example, to convert from mass to volume, the unit factor is V/m.

This unit factor can then be used to convert mass to volume or vice versa. Dimensional analysis helps us to determine the proper units for a given equation and to convert from one unit to another.

It also allows us to compare different units of measurement and to check that the units in both sides of an equation match. This is especially useful in chemical calculations, where it is important to ensure the correct units are used.

For more questions like Dimensional analysis click the link below:

https://brainly.com/question/23510660

#SPJ4

Answer: ahem...

Explanation: 1. True 2. reproducing 3. All of them 4. i would say true, the only thing is plants dont really digest food and it says "all" organisms... 5. B, C, and D...A is more of defense and not really "maintaining structure"

Answer:

Aluminum + Nickel(Ii) Nitrate = Nickel + Aluminum Nitrate

Explanation:

The chemical equation for this reaction is best written as: Na (s) + Cl2 (g) → NaCl (s) + Heat

Reaction is a process in which one or more substances are changed into one or more different substances. It is a chemical or physical change that occurs in response to a stimulus. Reactions can be used to create new materials or to break down existing materials into simpler components. They can also be used to generate energy or to store energy. Reactions can be either spontaneous or non-spontaneous, depending on the conditions in which they occur.

To learn more about reaction
https://brainly.com/question/25769000
#SPJ4

Answer:

20

Explanation:

17 proton and 20 neutrons

Answer: #Neutrons= 20

Explanation: Cl with 37 mass number has the atomic number of 17.

Solution:

mass number = Protons + Neutrons

But # Protons = 17

Therefore, N= A-P= 37-17= 20 neutrons

The structure of a molecule affects its physical properties because the arrangement of the atoms in the molecule determines the type of forces that interact between molecules.

And that forces affect how the molecules move and interact with each other. This, in turn, affects the physical properties of the molecule, such as its melting point, boiling point, polarity, and solubility.

For example, when a molecule has a higher number of non-polar bonds due to symmetrical structures, it will be less polar overall and have fewer attractive forces acting between molecules, resulting in a higher boiling point and lower solubility.

On the other hand, a molecule with a higher number of polar bonds due to asymmetrical structures will be more polar overall, leading to stronger attractive forces acting between molecules, resulting in a lower boiling point and higher solubility.

For more questions like Properties click the link below:

https://brainly.com/question/13562531

#SPJ4

Answer:

Na, Cu, and Br will form positive ions

Explanation:

Na, Cu, and Br have more protons than electrons, so they will form positive ions.

Na, Cu, and Br are all elements that have an atomic number greater than their number of electrons. This means that they have more protons than electrons, so they will form positive ions when they react with other elements. Na will form Na+, Cu will form Cu+ and Br will form Br+.

Answer:

The Answer is gonna be d. They assume the shape of container

This is the right Answer

I hope you are having a great day :3

The order of increasing radius is:  Na+ < Rb+ < Br-

The radius of an atom or ion is a measure of the size of the atomic nucleus and the electron cloud that surrounds it. The radius of an atom or ion can be affected by various factors such as the number of protons, neutrons and electrons it has, as well as the electron configuration. In general, as we move from left to right across the periodic table, atomic radius tends to increase.

In the case of the three ions you provided, Br-, Na+ and Rb+ , the order of increasing radius is as follows:

Na+ has the smallest atomic radius among the three, as it has lost one electron and become a positive ion, the removal of the electron increases the effective nuclear charge, making the electron cloud more tightly held.

Rb+ has a slightly larger atomic radius than Na+ as it has one more electron and one more proton in its nucleus than Na+, making the electron cloud slightly less tightly held.

Br- has the largest atomic radius among the three as it has gained an electron and become a negative ion, the addition of the electron decreases the effective nuclear charge, making the electron cloud less tightly held.

Learn more about Radius:

https://brainly.com/question/29440273

#SPJ4

An extremely efficient enzyme has a small KM and a large kcat.

The conversion rate at the lowest substrate concentration is measured in kcat/km. This interpretation is accurate. kcat/Km is a good indicator of an enzyme's effectiveness since it takes into account both the enzyme's maximum rate, kcat, and its affinity for its substrate (Km).The turnover number, or the number of molecules that may be created per second per active site, of an enzyme is provided by the formula k c a t / kM.Because the substrate concentration is almost usually much greater than the Km, in many situations, enzymes are only better when they have a larger kcat. It seems disingenuous to me to use the ratio when this is plainly the case, yet it still happens much too frequently. It could serve as a useful benchmark when compared to enzymes in particular situations.

complete question:An extremely efficient enzyme has a _____ KM and a _____ kcat.

A) small; small

B) small; large

C) large; large

D) large; small

E) kcat and KM do nothing to predict the efficiency of an enzyme

learn more about kcat Refer:brainly.com/question/14818292

#SPJ4

Answer:

Reflection: reflection is the process of returning of light into the same medium after striking a surface.

Answer:

Its A

Explanation:

The structure that corresponds to the name 4-chloro-3-ethyl-2-hexene​based on IUPAC nomenclature is option A is correct.

In organic chemistry is a method of naming organic chemical compounds as recommended by the International Union of Pure and Applied Chemistry (IUPAC).

The Word root of the name indicates the number of carbon atoms in the longest possible continuous carbon chain also known as the parent chain stucture.

The primary suffix structure  is used to indicate the degree of saturation or unsaturation in the main chain. A secondary suffix is used to indicate the main functional group in the organic structure and is added immediately.

The 1o suffix in the name and the prefix are used to indicate the side chains, substituents, and low-priority functional groups which are considered as substituents.

Therefore, the name is  4-chloro-3-ethyl-2-hexene​ option A is correct.

Learn more about IUPAC structures, here :

https://brainly.com/question/17031893

#SPJ2

The pressure of N2O gas at a density of 3.10 g/L and a temperature of 298 K is 751 mmHg. To calculate the pressure of the N2O gas at a given density and temperature, we can use the ideal gas law: PV = nRT.

We know that the density of the gas is 3.10 g/L, and the temperature is 298 K. To find the pressure, we can assume that the volume of the gas is 1 L, and solve for pressure. where P is the pressure of the gas, V is the volume, n is the number of moles, R is the ideal gas constant, and T is the temperature in Kelvin.

The density of a gas can be converted to moles using the formula:

Density = m/V

m = Density*V

Now we can use the ideal gas law to calculate the pressure:

P = (mRT)/V

R is the ideal gas constant = 0.0821 L atm K^-1 mol^-1

P = (3.10g0.0821 L atm K^-1 mol^-1298 K)/1 L

P = 751 mmHg

Learn more about pressure here:

https://brainly.com/question/25736513

#SPJ4

A sample of methane collected when the temp was 30 C and 760mmHg measures 398 mL. What would be the volume of the sample at -5 C and 616 mmHg pressure

434.32mL

Using the combined gas law:

[tex]\frac{PV}{T}[/tex] = k

Where;

P = Pressure

V = Volume

T = Temperature

k = constant.

It can be deduced that:

[tex]\frac{P_1V_1}{T_1}[/tex] = [tex]\frac{P_2V_2}{T_2}[/tex] = k           ---------------------(i)

Where:

P₁ and P₂ are the initial and final pressures of the given gas

V₁ and V₂ are the initial and final volumes of the given gas

T₁ and T₂ are the initial and final temperatures of the gas.

From the question:

the gas is methane

P₁  = 760mmHg

P₂ = 616mmHg

V₁ = 398mL

V₂ = ?

T₁ = 30°C = (30 +273)K = 303K

T₂ = -5°C = (-5 +273)K = 268K

Substitute these values into equation (i) as follows;

[tex]\frac{760*398}{303}[/tex] = [tex]\frac{616*V_2}{268}[/tex]

Solve for V₂

V₂ = [tex]\frac{760*398*268}{616*303}[/tex]

V₂ = 434.32mL

Therefore, the volume of the sample at -5C and 616mmHg pressure is 434.32mL

The density of the metal beads, given that total mass of the metal plus alcohol in the flask was determined to be 38.6794 g is 3.22 g/mL

We'll begin by obtaining the density of the alcohol in the flask with the metal beads. This is illustrated below:

Density = mass / volume

Density of alcohol = 19.7325 / 25

Density of alcohol = 0.7893 g/mL

Next, we shall determine the volume of the alcohol in the 25 mL flask. This can be obtained as follow:

Volume = mass / density

Volume of alcohol in flask = 13.5734 / 0.7893

Volume of alcohol in flask = 17.2 mL

Finally, we shall determine the density of the metal beads. Details below:

Density = mass / volume

Density of metal beads = 25.1060 / 7.8

Density of metal beads = 3.22 g/mL

Thus, we can conclude that the density of the metal beads is 3.22 g/mL

Learn more about density:

https://brainly.com/question/952755

#SPJ1

Complete question:

A calibrated flask was filled to the 25.00 mL mark with ethyl alcohol. By weighing the flask before and after adding the alcohol, it was determined that the flask contained 19.7325 g of alcohol. In a second experiment, 25.1060 g of metal beads were added to the flask, and the flask was again filled to the 25.00 mL mark with ethyl alcohol . The total mass of the metal plus alcohol in the flask was determined to be 38.6794 g. What is the density of the metal in g/mL?

The simplest formula for a compound is made up of 1.677 grams of iron and 0.640 grams of oxygen would be FeO.

What the question is asking here is the empirical formula of an oxide of iron made up of 1.677 grams of iron and 0.640 grams of oxygen. The empirical formula shows the formula in the simplest whole-number ratio of the atoms.

Iron (Fe) = 1.677 grams

Oxygen (O) = 0.640 grams

Converting the masses to moles:

Fe = 1.677/56 = 0.0299 mol

O = 0.640/16 = 0.0400 mol

Now, let's divide by the smallest mole:

Fe = 0.0299/0.0299 = 1.0

O = 0.0400/0.0299 = 1.3

Thus, the empirical formula of the oxide of iron is FeO.

More on empirical formulas can be found here: https://brainly.com/question/14044066

Answer:

single replacement

Explanation:

it's when one element starts out by itself, then replaces another element in a compound, kicking it out

Answer: This is a chemical reaction

Explanation: Hope this helps:)))

Answer:

pH = 1.64

Explanation:

Answer:

joules.

Explanation:

A measure of the total internal heat content.

which could be exothermic or endothermic

The percentage strength of the solution is 1%.

According to question,

we are given that the 20mg of cromolyn sodium in 2 ml of normal saline is taken.

Now, to find the percentage strength first know the meaning of percentage strength.

The amount of solute dissolved in gram per liter of the solution is used to determine the solution's strength. It stands for the solution's potency or concentration. It uses gram per liter of expression.

Now here we are given the the mass and volume connection so we have to find the percentage in terms of it.

percentage strength=[tex]\frac{mass}{volume} *100[/tex]

percentage strength=[tex]\frac{0.020*100}{2}[/tex]

on solving we get,

percentage strength=1%

Learn more about percentage strength

brainly.com/question/14531364

#SPJ4

The law that demonstrates this observation is the law of definite proportions.

Law of definite proportion states that a given chemical compound continually incorporates its element factors in constant ratio (with the aid of using mass) and does now no longer rely on its supply and technique of preparation. Law of Definite Proportions states that during a given kind of chemical substance, the factors are continually blended withinside the identical proportions with the aid of using mass. The Law of Definite Proportions applies while factors are reacted collectively to shape the identical product. Such as , a sample of an unknown substance contains 24. 0 grams of carbon and 2. 0 grams of hydrogen.

To learn more about law of definite proportion check the link below:

https://brainly.com/question/28888452

#SPJ4

Efficiency and safety are important criteria for the design of ammonia production processes, as they consume less energy and reliably produce large amounts of ammonia with minimal risk of accidents.

Design criteria are specific characteristics or requirements that a design must meet in order to be successful. They provide clear and measurable criteria for evaluating designs, ensuring that the final product meets the needs and expectations of customers or users. Design criteria include not only technical specifications such as size, weight and materials, but also performance requirements such as safety, efficiency and durability. It can also include cost-related criteria such as manufacturing cost, ease of maintenance, and environmental aspects. The process of identifying and defining design criteria is an important step in the design process as it helps ensure that the final product meets user needs and is fit for purpose. This is important because as much of the reactants (nitrogen and hydrogen) as possible are converted to ammonia, thereby maximizing the yield of the process. This is important to make the process economical and produce large amounts of ammonia.

To know more about ammonia visit:

https://brainly.com/question/22387087

#SPJ4

The orbital configuration of following elements is as follows: i) helium- 1 s² ii)nitrogen- 1 s² 2 s²  2 p³ iii)silicon-1 s² 2 s² 2 p⁶ 3 s² 3 p²

It is defined as a substance which cannot be broken down further into any other substance. Each element is made up of its own type of atom. Due to this reason all elements are different from one another.

Elements can be classified as metals and non-metals. Metals are shiny and conduct electricity and are all solids at room temperature except mercury. Non-metals do not conduct electricity and are mostly gases at room temperature except carbon and sulfur.

The number of protons in the nucleus is the defining property of an element and is related to the atomic number. All atoms with same atomic number are atoms of same element.

Here,

The orbital configuration of following elements is as follows: i) helium- 1 s² ii)nitrogen- 1 s² 2 s²  2 p³ iii)silicon-1 s² 2 s² 2 p⁶ 3 s² 3 p²

Learn more about elements, here:

https://brainly.com/question/21882530

#SPJ4

Answer:

Second option. 3

Explanation:

In order to balance a equation you need to have the same amount of atoms/moles in both sides.

Na₃PO₄  +  _ HCl  →  3NaCl  + H₃PO₄

In reactant side we have 3 Na and we have the same amount in product side.

We also have 1 P and 4 O in both sides of the equation.

As we have 3 moles of NaCl in product side, this means we have:

NaCl →  Na⁺  +  Cl⁻

3 moles of Na⁺ and 3 moles of Cl⁻. In conclussion we need 3 moles of Cl⁻ in reactant side.Then, the stoichiometry of HCl must be, 3.

3 moles of HCl means that we have 3 moles of protons (H⁺).

HCl  → H⁺  +  Cl⁻

If you see the phosphoric acid, we also have 3 moles of protons.

H₃PO₄ →  3H⁺  +  PO₄³⁻

Complete balanced equation is:

Na₃PO₄  +  3HCl  →  3NaCl  + H₃PO₄

Answer:

It combines vigorously with chlorine on mild heating and also with a variety of other nonmetals, including all of the halogens, sulfur, phosphorus, boron, carbon, and silicon (the carbide and silicide phases play major roles in the technical metallurgy of iron). Metallic iron dissolves readily in dilute mineral acids.

Explanation:

Iron is the chemical species that is the most used metal and is often found attached to the chlorine element.

Iron metals react with many elements and are an abundant element in the Earth's crust. It combines with the chlorine element when subjected to mild heating.

Along with chlorine it also reacts with halogen groups, carbon, sulfur, silicon, etc. This application is used in the metallurgy of iron.

Therefore, iron is joined to chlorine.

Learn more about iron and chlorine here:

https://brainly.com/question/9689046

#SPJ2