The ball will be caught by the thrower's right. The correct answer is option d.
When the merry-go-round is spinning counterclockwise, the person throwing the ball and the ball itself will have a tangential velocity in the counterclockwise direction. As the ball leaves the thrower's hand, it will continue to move in a straight line with this tangential velocity.
However, the ball is also subject to the circular motion of the merry-go-round, which means it will also have a centripetal acceleration towards the center of the merry-go-round.
As a result, the ball will follow a curved path towards the right of the thrower and will be caught by the thrower's right hand.
So, the correct answer is d. the ball caught to the thrower's right.
To know more about tangential velocity click here:
https://brainly.com/question/28738284
#SPJ11
an aluminum plate 0.5 cm thick is to withstand a force of 49,700 n with no permanent deformation. if the aluminum has a yield strength of 125 mpa, what is the minimum width of the plate (in cm)?
Considering the stress, the minimum width of the aluminum plate required to withstand a force of 49,700 N with no permanent deformation is 795.2 cm.
Stress, which is defined as force per unit area, may be used to indicate the aluminum's yield strength. As a result, we can determine the stress that corresponds to the aluminum's yield strength using the formula below:
Stress = yield strength equals 125 MPa or 125 N/cm2.
The aluminum plate's stress cannot be greater than its yield strength to prevent irreversible deformation of the material.
The force applied to the plate's surface may be related to its area using the stress formula:
Stress = force/area
area = 49,700 N / 125 N/cm² = 397.6 cm²
The area of the plate is the product of its width and thickness. Let's assume that the plate has a rectangular shape and solve for the minimum width required to achieve the required area:
area = width x thickness
width = area / thickness
= 397.6 cm² / 0.5 cm
= 795.2 cm
Therefore, the minimum width of the aluminum plate required to withstand a force of 49,700 N with no permanent deformation is 795.2 cm.
To learn more about stress, refer to:
https://brainly.com/question/26108464
#SPJ4
calculate the work done (in j) on a 1550 kg elevator car by its cable to lift it 38.5 m at constant speed, assuming friction averages 145 n.
The work done on the 1550 kg elevator car by its cable to lift it 38.5 m at constant speed, considering an average friction force of 145 N, is 591,494.25 J.
To calculate the work done on the elevator car, we need to consider both the force due to gravity and the friction force.
Step 1: Calculate the force due to gravity
Force due to gravity (F_gravity) = mass * acceleration due to gravity
F_gravity = 1550 kg * 9.81 m/s^2
F_gravity = 15,205.5 N
Step 2: Calculate the net force
Net force (F_net) = F_gravity + friction force
F_net = 15,205.5 N + 145 N
F_net = 15,350.5 N
Step 3: Calculate the work done
Work done (W) = F_net * distance
W = 15,350.5 N * 38.5 m
W = 591,494.25 J
The work done on the 1550 kg elevator car by its cable to lift it 38.5 m at constant speed, considering an average friction force of 145 N, is 591,494.25 J.
For more such questions on friction force , Visit:
https://brainly.com/question/24386803
#SPJ11
a coiled telephone cord forms a spiral with 74.0 turns, a diameter of 1.30 cm, and an unstretched length of 45.0 cm. determine the inductance of one conductor in the unstretched cord.
The inductance of one conductor in the unstretched cord is 1.28 x 10^-7 H.
When a coiled telephone cord forms a spiral with 74.0 turns, a diameter of 1.30 cm, and an unstretched length of 45.0 cm, we need to determine the inductance of one conductor in the unstretched cord.
Diameter (d) = 1.30 cm
Radius (r) = d/2 = 0.65 cm = 0.0065 m
Length (l) = 45.0 cm = 0.45 m
From the formula for the area of a circle;
A = πr²A = π(0.0065 m)² = 1.327 x 10^-4 m²
To determine the inductance of one conductor in an unstretched cord, we need to use the formula for inductance of a solenoid that is given;
L = [μN²A]/l
where;
L = inductance of the solenoid
N = number of turns of the coil = 74.0 turns
A = area of the coil in m²
μ = permeability of free space
l = length of the coil
L = [μN²A]/lL = [4π x 10^-7 (74.0)^2 (1.327 x 10^-4)]/0.45L = 1.28 x 10^-7 H
Therefore, the inductance of one conductor in the unstretched cord is 1.28 x 10^-7 H.
To know more about inductance click here:
https://brainly.com/question/29981117
#SPJ11
compare the kinetic energy distributions for the heavy vs. light particles at the same temperature. are these the same or different?
When we compare the kinetic energy distributions for heavy vs. light particles at the same temperature, we observe that the kinetic energy distributions are the same.
The molecules of gas have kinetic energy, which is dependent on the velocity of the particles that make up the gas. The heavier particles move slower and have less kinetic energy, while the lighter particles move faster and have more kinetic energy.
This relationship is governed by the equation:
KE = 0.5 mv²
Where,KE: Kinetic energy, M: Mass, V: Velocity
Since temperature is a measure of the average kinetic energy of particles, we can say that two samples of gas at the same temperature will have the same average kinetic energy of their particles.
Although the particles in the sample are of different sizes, they will have the same average kinetic energy.
For more such questions on kinetic energy, click on:
https://brainly.com/question/25959744
#SPJ11
a horizontal spring with a force constant of 40 is attached a 0.1 block. (a) if the block is pulled to a distance of 0.5 m and released, what is the maximum speed of the block? (b) what is the frequency of the oscillations? (c) if the spring were flipped vertically and attached to the ground with the block placed on top, how would the natural length of the spring change? (d) how does the frequency of the oscillations of the vertical spring- block oscillator compare with that when it was placed horizontally?
This potential energy will convert to Kinetic energy (KE) at maximum speed:
KE = 0.5 * m * v^2, where m is the mass of the block (0.1 kg) and v is the maximum speed.
(a) To find the maximum speed of the block, we can use the conservation of energy principle. When the block is pulled to a distance of 0.5 m, it has potential energy which will convert to kinetic energy when released.
Potential energy (PE) = 0.5 * k * x^2, where k is the spring constant (40 N/m) and x is the distance (0.5 m)
PE = 0.5 * 40 * (0.5)^2 = 5 J
This potential energy will convert to kinetic energy (KE) at maximum speed:
KE = 0.5 * m * v^2, where m is the mass of the block (0.1 kg) and v is the maximum speed.
Equating the potential energy and kinetic energy:
5 J = 0.5 * 0.1 * v^2
v^2 = 100
v = 10 m/s
(b) To find the frequency of the oscillations, we can use the formula:
f = (1 / 2π) * √(k / m), where f is the frequency, k is the spring constant, and m is the mass.
f = (1 / 2π) * √(40 / 0.1) = 1 Hz
(c) When the spring is flipped vertically and attached to the ground, the natural length of the spring will change due to the force of gravity acting on the block. However, since the question does not provide enough information to calculate the new length, we cannot provide a specific value.
(d) The frequency of oscillations of the vertical spring-block oscillator will be slightly lower compared to when it was placed horizontally. This is because, in the vertical position, the weight of the block acts against the spring force, which effectively increases the mass of the system, resulting in a lower frequency of oscillations.
To Learn More About Kinetic energy
https://brainly.com/question/25959744
#SPJ11
if a warm air mass is located in the southwest united states and a cold air mass is located in the southeast united states, from which direction will the winds blow? responses
If a warm air mass is located in the southwest united states and a cold air mass is located in the southeast united states, from west to east direction will the winds blow.
The prevailing westerlies blow from west to east, meaning that if a warm air mass is located in the southwest United States and a cold air mass is located in the southeast United States, the winds will blow eastward.
Therefore, from the east, the winds will blow. The winds will blow from the direction in which the pressure gradient force directs them.
The pressure gradient force is perpendicular to the isobars and directed from higher to lower pressure.
Wind is deflected to the right in the Northern Hemisphere and to the left in the Southern Hemisphere as a result of the Coriolis force, which is a consequence of the Earth's rotation.
The prevailing westerlies are winds that blow west to east between 30° and 60° latitude in both hemispheres.
For similar question on air mass
https://brainly.com/question/19626802
#SPJ11
a base jumper (60 kg k g ) jumps off a cliff from an initial height of 1000 meters. they open their parachute at a height of 400 meters. what is their change in gravitational potential energy between these points?
The change in gravitational potential energy of the base jumper between the initial height of 1000 meters and the height of 400 meters when they opened their parachute is -353160 J.
The change in gravitational potential energy of the base jumper can be calculated using the formula:
ΔPE = mgh
where ΔPE is the change in gravitational potential energy, m is the mass of the object, g is the acceleration due to gravity, and h is the change in height.
At the initial height of 1000 meters, the gravitational potential energy of the base jumper is:
PEi = mgh = (60 kg)(9.81 m/s^2)(1000 m) = 588600 J
At a height of 400 meters, the gravitational potential energy of the base jumper is:
PEf = mgh = (60 kg)(9.81 m/s^2)(400 m) = 235440 J
The change in gravitational potential energy between these points is:
ΔPE = PEf - PEi = 235440 J - 588600 J = -353160 J
The negative sign indicates that the gravitational potential energy of the base jumper decreased as they fell.
For such more question on gravitational:
https://brainly.com/question/72250
#SPJ11
what is the angle of elevation, to the nearest tenth degree, to the top of a 35-m tree from 75 m away?
The angle of elevation to the top of a 35-meter tree from 75 meters away, to the nearest tenth degree, is 24.1 degrees.
When it comes to trigonometry, the angle of elevation refers to the angle formed by the line of sight of an observer with an object above the horizontal line. The angle of elevation is typically denoted by the Greek letter theta (θ). The tangent function is used to calculate the angle of elevation.
We can use the tangent function to calculate the angle of elevation.`
tan θ = opposite / adjacent`
Where:`opposite = height of tree = 35 m
adjacent = distance from tree = 75 m
Therefore, `tan θ = opposite / adjacent = 35 / 75
So, `θ = tan⁻¹(35 / 75)
Using a calculator, we get `θ ≈ 24.1°
Thus, To the nearest tenth degree, the angle of elevation to the top of a 35-meter tree from 75 metres away is 24.1 degrees.
For more such questions on angle of elevation, click on:
https://brainly.com/question/31315984
#SPJ11
the process of freezing will: group of answer choices consume latent heat and cools down the environmental air. release latent heat and warms up the environment air. consume latent heat and warms up the environment air. release latent heat and cools down the environmental air.
Latent heat will be consumed during the cooling process, warming the surrounding air. A material turns from a liquid to a solid by releasing heat into the environment when it freezes.
The process of freezing requires the removal of latent heat from a substance to change its state from a liquid to a solid. This means that freezing consumes latent heat from the substance itself, causing it to cool down. However, since the process also requires the substance to release this heat to the surrounding environment, the environment air is warmed up instead of being cooled down. This warming effect is due to the fact that the heat energy released during the freezing process is transferred from the substance to the surrounding air. Therefore, although the substance being frozen may become colder, the surrounding air becomes warmer, and this can have significant effects on the environment, especially in areas where freezing occurs frequently or over extended periods of time.
Learn more about environmental air here:
https://brainly.com/question/30774791
#SPJ4
Comets that come from the oort cloud have orbits that:
A. decay over time, bringing them closer to the sun each year.
B. have random tilts and orbits, sharing little with each other.
C. have very short orbits for their size and distance from the sun.
D. are evenly distributed between retrograde and prograde.
Oort cloud comets have orbits that gradually degrade over time, pushing them nearer to the sun every year. A is the right answer.
What makes a comet a comet?The word comet is derived from the Greek letter o (kometes), which indicates "long-haired." The typical observational test for distinguishing between a comet and an asteroid in a freshly discovered object is, in fact, the presence of the brilliant coma.
What is a comet, exactly?Comets are solar system-orbiting icy balls of rock, gas, and dust. They resemble a small town in size when frozen. A comet's path brings it in close proximity to the Sun, which causes it to heat up and eject gases and dust into a massive blazing head bigger than most planets.
To know more about comet visit:
brainly.com/question/12443607
#SPJ1
what approximate power must the glasses have underwater to allow you to see distant objects without a mask?
Approximate power required for the glasses underwater to allow distant object visibility without a mask is -2.5 diopters.
A scuba diving mask is an important component of a scuba diving kit since it covers the eyes and nose while under the water. The mask has an air pocket inside that permits you to focus on objects underwater without experiencing a change in the size of the image or refraction.A snorkel mask is worn during snorkeling, whereas a scuba mask is worn during diving. Because of the difference in pressure between the atmosphere and the underwater environment, the mask must be manufactured in such a way that it can withstand the weight of the water. It is advisable to ensure that the mask is snug and that water does not seep in when it is worn.How much power must the glasses have underwater to allow distant object visibility without a mask?The approximate power that the glasses must have underwater to allow for distant object visibility without a mask is -2.5 diopters. A scuba diving mask aids in providing the right refraction and a focused view of objects underwater. The glasses, on the other hand, must compensate for the change in the focal length that occurs when light passes from one medium to another (in this case, water to air). The refractive index of the glasses compensates for the shift, allowing for clear and focussed visibility of distant objects. The -2.5 diopters power of the glasses is necessary to provide the best underwater sight.
Learn more about diving mask here:
https://brainly.com/question/30908085
#SPJ4
the surface of the earth consists of several rigid layers called , which move in response to forces acting deep within the planet.
Answer:
The surface of the earth consists of several rigid layers called tectonic plates, which move in response to forces acting deep within the planet.
The surface of the earth consists of several rigid layers called tectonic plates, which move in response to forces acting deep within the planet.
What are tectonic plates?
Tectonic plates are the rigid and solid blocks that make up the Earth's lithosphere, which is composed of the Earth's crust and the uppermost portion of the mantle. They are typically between 30 and 60 miles thick and fit together like a jigsaw puzzle covering the surface of the Earth.The Earth's lithosphere is made up of tectonic plates that move. These plates float on the Earth's molten mantle, which is heated by the Earth's internal heat. The mantle, which is comprised of molten magma, creates thermal convection currents that move the tectonic plates.What causes the movement of tectonic plates?The tectonic plates move as a result of convection currents in the Earth's mantle. These convection currents are created by heat generated by the decay of radioactive isotopes in the mantle. The hot material in the mantle rises, cools, and then sinks back down, causing tectonic plates to move in a process known as plate tectonics.The movement of these plates causes geological activity such as earthquakes, volcanoes, and the creation of mountain ranges. Plate tectonics also plays a crucial role in the development of life on Earth, as it is responsible for the recycling of nutrients and the formation of new land masses.
To know more about tectonic plates click here:
brainly.com/question/19317822
#SPJ11
Ling heard on the news that a high-pressure system is moving into her area. What weather conditions should she expect?
Group of answer choices
clear skies
fog
thunder clouds
sleet
en un golpe de pelota vasca, un jugador golpea la pelota desde 0,8 m del suelo con una velocidad v0 que forma 60º con la horizontal, estando en ese momento a 10 m del frontis. La pelota golpea la pared en un punto a 4,2 m de altura cuando está en trayectoria descendente. Determina: a) la velocidad v0 que se comunicó a la pelota en el golpe.
Resolvemos las ecuaciones simultáneamente para obtener v0. En este caso, podemos encontrar que la velocidad inicial (v0) que se comunicó a la pelota en el golpe es aproximadamente 16,35 m/s.
Para determinar la velocidad inicial (v0) de la pelota en el golpe de pelota vasca, podemos utilizar la ecuación de la trayectoria parabólica. En este caso, conocemos la altura inicial (0,8 m), la distancia horizontal (10 m) y la altura final en la pared (4,2 m) cuando la pelota golpea el frontis. También sabemos que el ángulo con respecto a la horizontal es de 60º.
Primero, descomponemos la velocidad inicial en sus componentes horizontal y vertical:
v0x = v0 * cos(60º)
v0y = v0 * sen(60º)
Luego, utilizamos la ecuación de la trayectoria parabólica para la altura en función del tiempo:
y(t) = 0,8 + v0y * t - (1/2) * g * t^2
4,2 = 0,8 + v0 * sen(60º) * t - (1/2) * 9,8 * t^2
Además, usamos la ecuación para la distancia horizontal:
x(t) = 10 = v0 * cos(60º) * t
For more such questions on velocidad, click on:
https://brainly.com/question/16679190
#SPJ11
when the palmaris longus muscle in the forearm is flexed, the wrist moves back and forth. if the muscle generates a force of 51.5 n and it is acting with an effective lever arm of 2.65 cm , what is the torque that the muscle produces on the wrist?
The torque that the muscle produces on the wrist is 1.36575 Nm.
When the Palmaris longus muscle in the forearm is flexed, the wrist moves back and forth. If the muscle generates a force of 51.5 N and it is acting with an effective lever arm of 2.65 cm, the torque that the muscle produces on the wrist can be calculated as follows;
Step-by-step explanation:
The formula for torque is:
T = F × r
Where;
T is torque
F is force
R is the length of the lever arm
To calculate torque:
Torque (T) = Force (F) × length of lever arm (r)
So, substituting the given values, we have;
Torque (T) = 51.5 N × 0.0265 m = 1.36575 Nm
Therefore, the torque that the muscle produces on the wrist is 1.36575 Nm.
To know more about Torque, refer here:
https://brainly.com/question/28220969#
#SPJ11
part 1: earth, moon, and sun relationships it takes approximately four weeks (one month) for the moon to travel around earth. below is a diagram showing the earth, sun, and moon as viewed from the north pole. the diagram is not to scale. moon sun earth 1. draw an arrow on earth to show earth's rotation. how long does this take? 2. draw an arrow on the moon showing the direction of the moon's motion around earth. how long does this take?
Earth rotates from west to east, taking 24 hours.The Moon orbits Earth from west to east, taking one month.
The pivot of the Earth is liable for the pattern of constantly. The Earth pivots from west to east, which is the reason the Sun seems to ascend in the east and set in the west. It takes the Earth around 24 hours, or at some point, to finish one revolution. The hub of pivot is shifted at a point of roughly 23.5 degrees comparative with the plane of the World's circle around the Sun.
This slant is answerable for the changing seasons on the planet.The Moon's movement around the Earth is known as its orbital movement. The Moon circles the Earth in a counterclockwise course when seen from the North Pole. The time it takes for the Moon to finish one circle around the Earth is known as the lunar month or synodic month.
This requires around 29.5 days, or one month. The Moon's circle is definitely not an ideal circle but instead an oval, and that implies that its separation from the Earth changes during its circle. The nearest point of the Moon's circle is known as the perigee, while the farthest point is known as the apogee. Whenever the Moon is at its nearest highlight Earth, it seems bigger and more splendid, and this is known as a supermoon.
To learn more about earth, moon, and sun, refer:
https://brainly.com/question/10982872
#SPJ4
Need help with this problem. Trying to find all the values and explanations how to get it.
Thank you.
Answer:
c d
Explanation:
work of 4 joules is done in stretching a spring from its natural length to 14 cm beyond its natural length. what is the force (in newtons) that holds the spring stretched at the same distance (14 cm)?
The force that holds the spring stretched at a distance of 14 cm is 2 N. The potential energy stored in the spring is defined by the amount of work done on the spring when it is stretched.
the work done is 4 J. If the spring has been stretched to a distance of 14 cm beyond its natural length, the elongation (stretch) produced is given by; x = 14 cm = 0.14 m The work done to stretch the spring is given by. Work done = (1/2) kx²Since the work done is 4 J, we have;(1/2) kx² = 4J Here, k is the spring constant which we have not been given. We will use the formula below to solve for k;k = (2W)/x² = (2(4 J))/(0.14 m)² = 102.04 N/mThe force that holds the spring stretched at a distance of 14 cm is given by. F = k x = (102.04 N/m)(0.14 m) = 14.29 N ≈ 2 N (to 1 decimal place) To find the force (in Newtons) that holds the spring stretched at a distance of 14 cm, we can use the formula for work done: Work = Force × Distance. In this case, Work = 4 Joules, and Distance = 0.14 meters (converted from 14 cm). Rearranging the formula, we get Force = Work / Distance. Force = 4 Joules / 0.14 meters = 28.57 Newtons.
Learn more about Joules here:
https://brainly.com/question/18596314
#SPJ11
when all the individual components losses are calculated for a 2 kw pv system using no storage (batteries), the system's final output should be roughly what percentage of the sum of the rated power of the panels? select one: a. 60 to 65 percent b. 70 to 80 percent c. 85 to 88 percent d. 88 to 92 percent
The sum of these losses can typically result in the system's final output being around 85 to 88 percent of the sum of the rated power of the panels. Therefore, option C. 85 to 88 percent is the correct answer.
When calculating the overall efficiency or final output of a photovoltaic (PV) system without storage (batteries), the system's output will typically be around 85 to 88 percent of the sum of the rated power of the panels. This is due to various losses that occur in a PV system, including but not limited to:
Conversion losses: These occur during the conversion of solar energy into electricity by the PV panels. Typically, PV panels have an efficiency rating that indicates the percentage of solar energy they can convert into electricity.Wiring losses: These losses occur in the wiring and interconnections between the PV panels, inverters, and other system components. Resistance in the wires can result in energy losses in the form of heat.Inverter losses: Inverters are used to convert the DC (direct current) electricity produced by the PV panels into AC (alternating current) electricity that can be used in the electrical grid or by appliances. Inverters also have efficiency ratings, and their efficiency can impact the overall output of the system.Shading losses: Shading from trees, buildings, or other obstructions can reduce the amount of sunlight that reaches the PV panels, resulting in reduced output.Temperature losses: Higher temperatures can reduce the efficiency of PV panels, resulting in lower electricity production.Learn more about photovoltaic (PV) system
brainly.com/question/30632856
#SPJ4
for a frequency of light that has a stopping potential of 3 volts, what is the maximum kinetic energy
The maximum kinetic energy for a frequency of light that has a stopping potential of 3 volts is 4.8 x 10^-19 joules.
The stopping potential of a photoelectric experiment is the minimum potential difference required to stop the emission of electrons from a metal surface when light is incident on it.
The maximum kinetic energy (KE) of an electron emitted by a light with a stopping potential (V) can be found using the formula:
KE = e * V
where e is the charge of an electron, which is approximately 1.6 x 10^-19 coulombs.
Given that the stopping potential is 3 volts, we can find the maximum kinetic energy as follows:
KE = (1.6 x 10^-19 C) * 3 V
KE = 4.8 x 10^-19 J
So, the maximum kinetic energy is 4.8 x 10^-19 joules.
For more such questions on kinetic energy, click on:
https://brainly.com/question/25959744
#SPJ11
how are volume and temperature related? if i raise the temperature of some object, what should happen to its volume?
When an object is heated, its volume generally increases due to the thermal expansion of matter, with the extent of expansion depending on the material properties and temperature change.
The relationship between volume and temperature is described by the thermal expansion of matter. In general, when an object is heated, its particles gain energy and vibrate more vigorously, increasing the space between them. As a result, the object expands, and its volume increases.
This relationship is quantified by the coefficient of thermal expansion, which is a material-specific constant that relates the change in volume or length of an object to the change in temperature. The coefficient of thermal expansion is positive for most materials, indicating that they expand when heated.
However, it is important to note that the extent of thermal expansion depends on the material properties, the initial temperature, and the temperature change. Some materials expand more than others for the same temperature change, and the expansion is typically greater at higher temperatures.
To learn more about thermal expansion
https://brainly.com/question/30242448
#SPJ4
what size tank would be needed to contain this same amount of helium at atmospheric pressure (1 atm )?
When 20.6 g of helium is present in a container at a pressure of 5.6 atm and a temperature of 18°C, The size of the tank that would be needed to contain the same amount of helium at atmospheric pressure (1 atm) is 0.294 L.
The ideal gas law, PV = nRT, relates the pressure, volume, amount of substance, and temperature of a gas. Where:V: volume, P: pressure, n: number of moles of gas, R: the gas constant, T: temperature
The ideal gas law, PV = nRT, can be rearranged to find the volume of a gas given its pressure, number of moles, and temperature as shown below:
V = nRT/P
In this problem, we are required to find the size of a tank required to hold a specified number of moles of helium gas under different conditions (1 atm, 18°C) from the conditions under which the helium is presently stored (5.6 atm, 18°C).
As a result, the number of moles of helium in the container at 5.6 atm and 18°C must first be determined.
employing the ideal gas law:
PV = nRT
n = PV/RT
n = (5.6 atm)(0.015 m³)/(0.08206 L·atm/mol·K)(291.15 K)
n = 0.01237 mol
We'll now use the number of moles determined above to calculate the size of the tank required at a pressure of 1 atm and 18°C using the ideal gas law.
V = nRT/P
V = (0.01237 mol)(0.08206 L·atm/mol·K)(291.15 K)/1 atm
V = 0.294 L
Therefore, the size of the tank required at 1 atm and 18°C is 0.294 L.
For more such questions on atmospheric pressure, click on:
https://brainly.com/question/20726014
#SPJ11
The probable question may be:
When 20.6 g of helium is present in a container at a pressure of 5.6 atm and a temperature of 18°C, what size tank would be needed to contain this same amount of helium at atmospheric pressure (1 atm )?
a 0.40-kg mass attached to a spring is pulled back horizontally across a table so that the potential energy of the system is increased from zero to 155 j. ignoring friction, what is the kinetic energy of the system after the mass is released and has moved to a point where the potential energy has decreased to 70 j?
The kinetic energy of the system after the mass is released and has moved to a point where the potential energy has decreased to 70 J is 85 J.
The total mechanical energy of the system (spring and mass) is conserved, and is equal to the sum of the potential energy and kinetic energy:
E = PE + KE
At the initial point, the potential energy of the system is 155 J, and the kinetic energy is zero:
Ei = PEi + KEi = 155 J + 0 J = 155 J
At the final point, the potential energy of the system is 70 J, and the kinetic energy is unknown:
Ef = PEf + KEf = 70 J + KEf
Since the total mechanical energy is conserved, we can equate Ei to Ef:
Ei = Ef
155 J = 70 J + KEf
KEf = 155 J - 70 J
KEf = 85 J
Therefore, the kinetic energy of the system after the mass is released and has moved to a point where the potential energy has decreased to 70 J is 85 J.
For such more question on kinetic energy:
https://brainly.com/question/8101588
#SPJ11
which skater, if either, has the greater speed after the push-off?which skater, if either, has the greater speed after the push-off?in order to conserve momentum, ricardo has a greater speed since he is more massive than paula.they have equal speeds since the magnitudes of their momenta are equal.in order to conserve momentum, paula has a greater speed since she is less massive than ricardo.
In order to conserve momentum, Paula has a greater speed after the push-off since she is less massive than Ricardo.
Momentum is the product of the mass of a moving object and its velocity. It's a vector quantity since it has both magnitude and direction. In a closed system, the total momentum before and after a collision or explosion is always conserved. This implies that the total momentum before and after a collision or explosion is always the same. The momentum of each object might, however, differ before and after a collision or explosion. The greater the mass of an object, the greater its momentum. The greater the velocity of an object, the greater its momentum. So, to conserve momentum, Paula has a greater speed after the push-off since she is less massive than Ricardo.
Learn more about conserve momentum at brainly.com/question/3920210
#SPJ11
consider a two-dimensional spring model of a solid like the one shown below. the left picture represents the solid in its normal, relaxed state. the right picture represents what the links between particles look like when the left side of the solid is uniformly compressed. what kind of wave would this compression produce in the solid?
The left picture represents the solid in its normal, relaxed state. The right picture represents what the links between particles look like when the left side of the solid is uniformly compressed.
A two-dimensional spring model of a solid consists of particles linked together by springs arranged in a two-dimensional pattern. When the left side of the solid is uniformly compressed, the links between the particles on the left side of the solid become shorter. This results in an increase in the spring forces that act on the particles on the left side of the solid.
These forces cause the particles on the left side of the solid to accelerate toward the right side of the solid, while the particles on the right side of the solid remain stationary. This results in the formation of a compression wave that travels from left to right through the solid. The compression wave is a longitudinal wave, which means that the motion of the particles in the solid is in the same direction as the direction of propagation of the wave.
To learn more about Picture :
https://brainly.com/question/29211371
#SPJ11
two 90-kg men are seated in the 400-kg boat a. using a 30-m rope, the man in the stern slowly pulls another 400-kg boat b toward himself. find the distance moved by boat a when the two boats are about to touch. neglect water resistance.
The distance moved by boat A when the two boats are about to touch is 10 meters.
To solve this problem, we can use the principle of conservation of momentum. Initially, the total momentum of the system is zero, since the boats are at rest. When the man in boat A pulls boat B towards himself, he imparts a forward momentum to boat B. By the principle of conservation of momentum, an equal and opposite momentum is imparted to boat A.
We can use the equation:
m1v1 + m2v2 = (m1 + m2)v'
where m1 and v1 are the mass and velocity of boat A initially, m2 and v2 are the mass and velocity of boat B initially, and v' is the final velocity of both boats when they are about to touch.
Plugging in the given values, we get:
(400 kg)(0 m/s) + (400 kg)(0 m/s) = (400 kg + 400 kg)v'
v' = 0 m/s
This tells us that the final velocity of both boats is zero. We also know that the man in boat A pulls boat B a distance of 30 meters. Therefore, boat A must have moved a distance of 10 meters (30 meters / 3) when the two boats are about to touch.
To know more about the Boats, here
https://brainly.com/question/14961734
#SPJ4
the reason a 4-cylinder reciprocating engine continues to run after the ignition switch is positioned to off may be a
There could be several reasons why a 4-cylinder reciprocating engine continues to run after the ignition switch is turned off. One possible explanation is that the engine is experiencing a phenomenon known as engine run-on, also referred to as dieseling.
Engine run-on occurs when the engine continues to run even after the ignition system has been turned off. This can happen if the engine is still generating enough heat to ignite the fuel-air mixture in the combustion chamber. This can be caused by several factors such as high engine temperature, carbon buildup in the combustion chamber, or low-quality fuel.
Another possible cause could be a faulty ignition switch or wiring. If the ignition switch or wiring is damaged or malfunctioning, it may fail to cut off the electrical power to the engine, allowing it to continue running even after the switch has been turned off.
It is important to diagnose and fix the problem as soon as possible as engine run-on can cause damage to the engine and other components. A qualified mechanic should be consulted to properly diagnose and repair the issue.
To learn more about reciprocating engines
https://brainly.com/question/18833025
#SPJ4
a thin, uniform rod of length l and mass m is rotated around an axis l/4 from one end and perpendicular to its length. what is its moment of inertia for this axis?
The moment of inertia of a thin, uniform rod for an axis l/4 from one end and perpendicular to its length is (1/16) * m * l^2.
To find the snapshot of idleness of the slight, uniform pole for a hub found l/4 from one end and opposite to its length, we can utilize the equal pivot hypothesis. This hypothesis expresses that the snapshot of inactivity of an unbending body for any pivot lined up with a given hub through the focal point of mass is equivalent to the snapshot of latency for the given hub in addition to the result of the mass of the item and the square of the distance between the two tomahawks.
In the first place, we want to track down the snapshot of idleness of the pole for a pivot through its focal point of mass and opposite to its length. This can be determined involving the equation for the snapshot of idleness of a uniform bar around its focal point of mass, which is (1/12) * m * [tex]l^2[/tex].
Then, we really want to find the distance between the focal point of mass and the new pivot found l/4 from one end. Since the bar is of uniform thickness, the focal point of mass is situated at the midpoint of the bar, or l/2 from one or the flip side. Subsequently, the distance between the focal point of mass and the new hub is l/4.
At long last, we can utilize the equal pivot hypothesis to track down the snapshot of inactivity for the new hub. Utilizing the recipe I = I_cm + [tex]m*d^2[/tex], where I_cm is the snapshot of latency for the focal point of mass pivot, m is the mass of the bar, and d is the distance between the two tomahawks, we have:
[tex]I = (1/12) * m * l^2 + m * (l/4)^2= (1/12) * m * l^2 + (1/16) * m * l^2= (4/48 + 3/48) * m * l^2= (1/16) * m * l^2[/tex]
Hence, the snapshot of dormancy of the dainty, uniform pole for the pivot found l/4 from one end and opposite to its length is [tex](1/16) * m * l^2[/tex].
To learn more about moment of inertia, refer:
https://brainly.com/question/14284456
#SPJ4
a certain string that is 1.0 m long vibrates with a standing wave that has a wavelength of 2.0 m. how many nodes and antinodes will appear on the vibrating string?
a heat engine that propels a ship produces 540 btu/lbm of work while rejecting 300 btu/lbm of heat. what is its thermal efficiency?
The thermal efficiency of the heat engine propelling the ship is approximately 64.29%. This means that about 64.29% of the heat input is converted into useful work to propel the ship, while the remaining 35.71% is rejected as waste heat.
The thermal efficiency of a heat engine is a measure of how effectively it converts heat energy into mechanical work. In the given student question, a ship's heat engine produces 540 BTU/lbm of work and rejects 300 BTU/lbm of heat.
To calculate the thermal efficiency, we need to know the total heat input, which is the sum of work output and heat rejected.
Total heat input = Work output + Heat rejected
Total heat input = 540 BTU/lbm + 300 BTU/lbm
Total heat input = 840 BTU/lbm
Thermal efficiency is the ratio of work output to total heat input, expressed as a percentage:
Thermal efficiency = (Work output / Total heat input) × 100
Thermal efficiency = (540 BTU/lbm / 840 BTU/lbm) × 100
Thermal efficiency ≈ 64.29%
For more such questions on thermal efficiency, click on:
https://brainly.com/question/3276817
#SPJ11