Answer:
Water
Explanation:
Which term describes the relationship in which one organism lives inside the other one. Check ih correct answer
Answer:
The term that describes the relationship in which one organism lives inside the other one is endosymbiosis.
Explanation:
In an ecosystem that is highly contaminated with PCB, where in the food chain would you find the highest concentration of PCB ? tertiary consumer primary producer water photosynthetic organism secondary consumer
In an ecosystem that is highly contaminated with PCBs (polychlorinated biphenyls), the highest concentration of PCB would be found in the tertiary consumer of the food chain.
Polychlorinated biphenyls (PCBs) are a group of chemicals that are no longer produced in the United States, but are still present in the environment. They were used as coolants and lubricants in electrical equipment such as transformers, capacitors, and other electrical equipment for years before being banned in the 1970s because of their harmful effects on human health and the environment.
PCBs enter the food chain as a result of bioaccumulation, which is the process by which chemicals accumulate in the fatty tissue of living organisms. PCBs have the potential to bioaccumulate and biomagnify in the food chain, which means that the concentration of PCBs increases as they move up the food chain from primary producers to secondary and tertiary consumers.
To know more about ecosystem visit :
https://brainly.com/question/31459119
#SPJ11
Scientific research in the 1800s revealed that the rate of infection in surgery patients drastically decreased when antiseptic were used to clean wounds before procedures.
A. It had a positive impact on the environment because it prevented bacterial growth
B. It had a negative impact on both society and the environment
C.it benefits society because it improved humans understanding of how infections spread
D. It harmed the environment because it led to new agriculture practices
Scientific research in the 1800s revealed that the rate of infection in surgery patients drastically decreased when antiseptic were used to clean wounds before procedures. This had (C) a positive impact on society because it improved human understanding of how infections spread.
Antiseptics refer to a group of compounds that destroy or slow the growth of microorganisms such as bacteria and fungi. Joseph Lister, a British surgeon, played a vital role in revolutionizing surgical techniques. Lister became aware of Louis Pasteur's germ theory, which stated that infection was caused by microorganisms in the air.
Lister believed that if the number of microorganisms was decreased, the rate of infection would be lower. As a result, he began cleaning his surgical instruments and patients' wounds with carbolic acid, a type of antiseptic. The use of antiseptic reduced the rate of infection in surgical patients, according to Lister's research.
The discovery of antiseptics had a positive impact on society because it improved human understanding of how infections spread. It also enabled doctors and surgeons to perform procedures with a lower risk of infection. As a result, surgical procedures became more effective, and recovery time was reduced. This discovery laid the foundation for modern surgical techniques and led to the development of new antiseptics that are still in use today.
Therefore, it can be concluded that the use of antiseptics had a positive impact on society as it improved human understanding of how infections spread, enabling doctors and surgeons to perform procedures with a lower risk of infection. This discovery laid the foundation for modern surgical techniques and led to the development of new antiseptics that are still in use today. The correct answer is C.
Know more about Antiseptics here :
brainly.com/question/32354962
#SPJ8
what is it called when vesicles are used to move substances out of the cell?
Answer:
The process of using vesicles to move substances out of the cell is called exocytosis. During exocytosis, vesicles are engulfed by the plasma membrane and then fuse with it, releasing their contents outside the cell. This process is important for the removal of waste products from the cell. It can also be used to release hormones and neurotransmitters
Explanation:
In the tank, there are snails and an aquatic plant. Explain how WATER moves within and in between living and non-living things. Use the terms photosynthesis, evaporation, condensation in your answer.
Water circulates within and between living and non-living components in the tank via photosynthesis, evaporation, and condensation. Aquatic plants use water for photosynthesis, converting it into glucose and oxygen. Evaporation occurs due to heat, and condensation happens when water vapor returns to liquid form.
Water plays a crucial role in the movement and interactions within and between living and non-living things in the tank, including snails and the aquatic plant. The processes of photosynthesis, evaporation, and condensation are involved in the movement of water.
Photosynthesis is a vital process carried out by the aquatic plant. Through photosynthesis, the plant utilizes light energy, carbon dioxide, and water to produce glucose and oxygen. Water is absorbed by the plant's roots from the tank, and it is transported through the plant's vascular system to the leaves. In the leaves, water molecules undergo a series of chemical reactions in the chloroplasts, ultimately resulting in the release of oxygen and the formation of glucose. This process helps to regulate the water levels within the plant and produces oxygen as a byproduct.
Evaporation is the process by which water changes from a liquid to a gaseous state. As the tank is exposed to heat, such as from sunlight, some of the water in the tank and on the surfaces of the snails and plant will evaporate. The heat energy provides the necessary energy for water molecules to break free from the liquid phase and become water vapor.
Condensation occurs when the water vapor in the air comes into contact with a cooler surface and changes back into a liquid state. In the tank, as the water vapor rises from the evaporation process, it may come into contact with cooler surfaces, such as the sides of the tank or the leaves of the plant. When this happens, the water vapor condenses into liquid water droplets. These droplets can then accumulate on the surfaces of the tank, the snails, and the plant.
Overall, water moves within and between living and non-living things in the tank through the processes of photosynthesis, evaporation, and condensation. This movement is essential for the survival and functioning of the aquatic plant and the overall balance of the tank ecosystem.
For more such information on: photosynthesis
https://brainly.com/question/19160081
#SPJ8
is the blue pinkgill fungus saprophytic, parasitic, or mutualistic
Blue Pinkgill (Entoloma hochstetteri) is primarily categorised as a saprophytic fungus.
Saprophytes obtain nutrients by decomposing organic matter that has died. The blue Pinkgill fungus typically grows on decaying wood, logs, or leaf debris, and it contributes to the decomposition and recycling of organic matter within the ecosystem.
Noting that some fungi, such as the blue Pinkgill fungus, can have complex ecological interactions and exhibit varying degrees of parasitism or mutualism depending on specific circumstances or interactions with other organisms is important. However, the Blue Pinkgill fungus is primarily saprophytic, as it obtains the majority of its nutrients from decomposing organic matter.
To learn more about Saprophytes,
https://brainly.com/question/11500804
what is the process of water moving from an area of low solute concentration to an area of high solute concentration?
Explanation:
Osmosis is a passive transport process during which water moves from areas where solutes are less concentrated to areas where they are more concentrated.
hope it helps you
please mark as brainliest
the concept of using natural resources at a rate that does not deplete them is called?
The conversion of a once soil-rich area to an area of little vegetation is called: deforestation. The loss of fertile soils from an area through the action of water or wind is called: desertification. The concept of using natural resources at a rate that does not deplete them is called: sustainable development.
Which of the following involves a situation in which a density-independent factor influences a population? An outbreak of chronic wasting disease is observed in a herd of elk Many populations fight to access a watering hole in a savanna ecosystem as a water source A major flood washes away vegetation around a river and loads it with sediments and excess nutrients impacting aquatic populations An invasive honeysuckle bush has overtaken a small section of forest and overcrowded samplings attempting to grow A coyote is spotted in a neighborhood park hunting rabbits
The option that involves a situation in which a density-independent factor influences a population is A major flood washes away vegetation around a river and loads it with sediments and excess nutrients impacting aquatic populations.
Density-independent factors are environmental factors that affect populations regardless of their density. A major flood, as mentioned in the given options, is an example of a density-independent factor because it does not depend on the population density.
The major flood causes a significant impact on the environment, including the aquatic populations, which can lead to a decline in the population density of some species. Chronic wasting disease, invasive honeysuckle bush, and coyotes are density-dependent factors because they influence the population based on the population density.
To know more about population visit :
https://brainly.com/question/15889243
#SPJ11
Use the phylogenetic tree to the right to choose the true statement below.
The true statement based on the phylogenetic tree is: "Ray-finned fish evolved before sharks."
In the given phylogenetic tree, the branches representing ray-finned fish and sharks originate from a common ancestor.
However, the branch representing ray-finned fish diverges earlier in evolutionary history compared to the branch representing sharks. This indicates that ray-finned fish appeared before sharks in the evolutionary timeline.
Phylogenetic trees illustrate the evolutionary relationships between different species or groups of organisms. The branching patterns in the tree show the common ancestry and divergence of different lineages.
By analyzing the structure of the phylogenetic tree, we can infer the relative timing of evolutionary events and the relationships between different groups of organisms.
In this case, the phylogenetic tree indicates that ray-finned fish evolved before sharks, suggesting that ray-finned fish have a longer evolutionary history and are more ancient than sharks.
It is important to note that this statement does not provide information about the relationship between crocodiles, amphibians, primates, rodents, rabbits, and other groups mentioned in the given options.
For more such answers on phylogenetic tree
https://brainly.com/question/2189834
#SPJ8
Question
Use the phylogenetic tree to the right to choose the true statement below.
Crocodiles are more closely related to amphibians than to primates.
A. Ray-finned fish evolved before sharks.
B. Rodents and rabbits are most closely related to primates.
C. Amphibians are more closely related to ray-finned fish than to primates.
It is possible to determine the chemical composition of a plasma
by measuring the optical emission spectrum (i.e.. optical intensity
as a function of wavelength). Explain why.
Yes, it is possible to determine the chemical composition of a plasma by measuring the optical emission spectrum.
What is plasma?
Plasma is a state of matter in which ionized gases are created by heating gases or subjecting them to a strong electromagnetic field. Because it can contain free radicals, ions, electrons, and highly excited molecules, plasma is important in astrophysics, fusion research, materials science, and other fields.
What is the Optical Emission Spectrum?
When plasma is generated, it emits radiation. Every element or molecule emits its own characteristic radiation at particular wavelengths when exposed to energy. As a result, the optical emission spectrum of plasma is used to investigate the presence and relative quantity of different elements in the plasma.
How is it possible to determine the chemical composition of a plasma by measuring the optical emission spectrum?
When plasma radiation is gathered, the intensity of light at various wavelengths is measured. The light is then separated into its constituent wavelengths by a prism or a diffraction grating. The intensities of different wavelengths are recorded using a detector after they've been separated.In essence, the intensity and spectral characteristics of the emitted radiation, which is distinctive to each component in the plasma, are used to determine the chemical composition of plasma. As a result, by measuring the optical emission spectrum, the chemical composition of plasma may be determined.
Learn about plasmas here brainly.com/question/950535.
#SPJ11
How do homeostasis and metabolism work together to keep an organism alive?
Answer:
Metabolism breaks down food into energy for an organism to use. Homeostasis then uses that energy to keep the organism in a balanced state so the organism can stay alive.
Explanation:
Use the cloze in the interactive to fill in the blanks. Plants are amazing organisms! In a process called _______________, they take sunlight (_______________ from the sun), _______________ gas from the air, and _______________ from the ground and make _______________ (food energy)! They also make _______________ gas during this process. Plants can either immediately use the glucose they make to power their _______________ or store it for growth or later use.
Answer:
Use the cloze in the interactive to fill in the blanks. Plants are amazing organisms! In a process called photosynthesis, they take sunlight and transform it into energy they can use to grow and survive.
Explanation:
Microorganisms that found in food can be classified based on
nutrien
protein, lipids and carbohydrates Elaborate this
statement.
Microorganisms that are found in food are classified into three types; carbohydrates, proteins, and lipids based on the nutrient they consume.
These nutrients are found in food and are required by microorganisms to survive and grow. The Microorganisms that feed on carbohydrates are referred to as carbohydrate fermenters which convert carbohydrates into energy by breaking down the sugars found in carbohydrates. Some examples of carbohydrate fermenters include yeast, lactic acid bacteria, and acetic acid bacteria.
Microorganisms that feed on proteins are referred to as protein decomposers. They break down the proteins found in food into amino acids and use them as a source of energy. Examples of protein decomposers include proteolytic bacteria and fungi.
The microorganisms that feed on lipids are referred to as lipid decomposers. They break down the fats found in food into fatty acids and glycerol, which they then use as a source of energy. Examples of lipid decomposers include lipolytic bacteria and fungi.
Microorganisms in nutrient-rich soil:
https://brainly.com/question/1198095
#SPJ11
Explain why adrenaline has different effects on the arteries of the gut and skeleton muscles
8. Cystic fibrosis is a disease that causes mucus to build up in the lungs. The underlying cause is a
misshapen protein in the cell membrane which interferes with the transport of chloride. Researchers have
identified two frameshift mutations associated with the disorder. One is caused by a two nucleotide insertion,
and the other is caused by a one nucleotide deletion. Why can both a deletion and an insertion mutation have
the same disease outcome?
Both deletion and insertion mutations can have the same disease outcome in the case of cystic fibrosis because they both result in a frameshift mutation.
In normal protein synthesis, the DNA code is read in groups of three nucleotides called codons. Each codon codes for a specific amino acid, and the sequence of codons determines the sequence of amino acids in the protein.
However, in a frameshift mutation, the reading frame of the DNA sequence is shifted, either by the deletion of a nucleotide or the insertion of an additional nucleotide. This alteration disrupts the normal grouping of codons, leading to a different sequence of amino acids being encoded.
In the context of cystic fibrosis, the misshapen protein in the cell membrane is caused by the frameshift mutation, which disrupts the normal structure and function of the protein. This misshapen protein interferes with the transport of chloride, leading to the buildup of mucus in the lungs characteristic of the disease.
Both deletion and insertion mutations alter the reading frame of the DNA sequence and result in a frameshift mutation, leading to the same disease outcome in cystic fibrosis. The specific location and size of the deletion or insertion may vary, but the overall consequence is the same: the production of a non-functional or partially functional protein that impairs chloride transport and causes mucus accumulation.
learn more about mutations here
https://brainly.com/question/13923224
#SPJ11
Which of the following is pivotal to engineered water pollution control systems? Consumers Producers Decomposers Bottom feeders Question 8 Which of the following is an effect of water pollution? Reduction of dissolved oxygen level Increase in dissolved oxygen level None of the options provided Stability of dissolved oxygen level
1. Among the options provided, decomposers are pivotal to engineered water pollution control systems, option C is correct.
2. An effect of water pollution is the reduction of dissolved oxygen levels, option A is correct
1. Decomposers play a crucial role in breaking down organic matter, such as pollutants and waste, in aquatic environments. They help in the natural recycling process by decomposing organic pollutants into simpler forms, which reduces their harmful effects on water quality. Decomposers, such as bacteria and fungi, contribute to the breakdown and removal of pollutants, aiding in the restoration and maintenance of a balanced ecosystem within engineered water pollution control systems, option C is correct.
2. Water pollution, particularly from sources like industrial discharge and excessive nutrient runoff, can lead to an overgrowth of algae and other aquatic plants. As these plants die and decompose, they consume oxygen in the water, resulting in a decrease in dissolved oxygen levels. Insufficient dissolved oxygen can harm aquatic organisms, such as fish and other marine life, which depend on oxygen to survive, option A is correct.
To learn more about decomposers follow the link:
https://brainly.com/question/33382684
#SPJ4
The correct question is:
1. Which of the following is pivotal to engineered water pollution control systems?
A. Consumers
B. Producers
C. Decomposers
D, Bottom feeders
2. Which of the following is an effect of water pollution?
A. Reduction of dissolved oxygen level
B. Increase in dissolved oxygen level
C. None of the options provided
D. Stability of dissolved oxygen level
1.Which of the following are examples of mechanical or physical control of garden pests?
Garden hose to spray off pests.
Rouging or pulling weeds before they become old enough to flower, fruit, and reproduce.
Erecting fences or barriers to exclude pests from the garden space.
Don't import garden pests from local plant nurseries.
2.The planting of disease-resistant garden plants is an example of what type of IPM control strategy?
Biological control
Physical or mechanical control
Cultural control
Chemical control
Answer:
Explanation:
1. The examples of mechanical or physical control of garden pests are:
- Garden hose to spray off pests.
- Rouging or pulling weeds before they become old enough to flower, fruit, and reproduce.
- Erecting fences or barriers to exclude pests from the garden space.
- Don't import garden pests from local plant nurseries.
2. The planting of disease-resistant garden plants is an example of a cultural control strategy in IPM.
Mechanical/physical control examples: garden hose, weed pulling, fences. Disease-resistant plants are an example of cultural control.
Explanation:Examples of mechanical or physical control of garden pests include using a garden hose to spray off pests, rouging or pulling weeds before they can reproduce, and erecting fences or barriers to exclude pests from the garden space. These methods physically remove or deter pests from the garden.
The planting of disease-resistant garden plants is an example of cultural control in IPM (Integrated Pest Management). Cultural control involves altering the environment or cultural practices to prevent pest damage. In this case, the choice of disease-resistant plants helps reduce the likelihood of pest infestations.
Learn more about Garden pest control here:https://brainly.com/question/33890622
#SPJ2
What are binding sites, present on DNA, that bind regulatory proteins, resulting in an increased level of transcription for a gene that is distant from the binding site? O A. enhancer O B. augmenter OC. amplifier OD enlarger O E. promoter
answer: silencer repress transcription. Like enhancers, silencers can be found before or after the gene they control and can be some distance away on the DNA strand
Please help! skin melanocytes produce the protein melanin, which gives the skin pigment. muscle cells do not produce melanin. which statement explains this difference between skin melanocytes and muscle cells?
A. muscle cells rely on rna, while melanocytes rely on dna.
B. melanocytes and muscle cells express different genes.
C. muscle cells destroyed the gene for melanin, but melanocytes did not.
D. melanocytes contain different genes from muscle cells
Answer:
The correct answer is B. "Melanocytes and muscle cells express different genes."
Although all cells in an organism (such as a human) contain the same DNA, different cell types express different sets of genes. Gene expression is the process by which specific genes are activated to produce a needed protein. In this case, the gene responsible for melanin production is expressed in melanocytes, but not in muscle cells.
This does not mean that muscle cells have destroyed the gene for melanin (as stated in option C) or that melanocytes contain different genes from muscle cells (as stated in option D). All cells within an organism contain the same genes, but not all genes are expressed in every cell. The process of gene expression is regulated by the cell to ensure that each cell type functions properly.
Option A is also incorrect because all cells, including both muscle cells and melanocytes, rely on both DNA (for storing genetic information) and RNA (for transmitting that information and producing proteins). DNA is transcribed into RNA, which is then translated into proteins. This process occurs in all cells.
The statement explains the difference between skin melanocytes and muscle cells is - melanocytes and muscle cells express different genes. So option b is correct.
Melanocytes are dark, dendritic-shaped, highly differentiated cells that secrete melanin, a pigment found in melanosomes, which is the primary function of melanocytes.
Melanocytes are a type of cell derived from the neural crest. They form a synapse with keratinocytes through their dendrites in the epidermis. Melanocytes play an important part in skin pigmentation and their role in the generation and distribution of melanin has been extensively studied.
To learn more about melanocytes, refer to the link:
https://brainly.com/question/12896990
#SPJ2
Describe a way that culture molds or defines biology
Culture has a significant impact on biology, including the ways in which people interact with one another, their lifestyles, and the foods they eat. Culture, in general, is a term that encompasses all human behavior patterns and social norms, which include things like language, traditions, beliefs, and customs.
culture molds or defines biology:
One of the keyways that culture molds or defines biology is through dietary practices and patterns. For example, many cultures have specific dietary guidelines and restrictions that are followed to ensure good health. In India, for example, vegetarianism is very common due to religious beliefs. Another example is the Japanese culture that places a strong emphasis on consuming fresh and minimally processed foods like fish, vegetables, and rice. These dietary practices have a profound impact on biology, including physical growth and development, cognitive function, and overall health and well-being. Another way culture molds biology is through behavior and lifestyle choices. For instance, in many Western cultures, it is common to sit for extended periods, which can lead to issues such as obesity, diabetes, and heart disease. In contrast, in many African and Asian cultures, individuals tend to be more active and engage in more physical labor, which can contribute to better overall health and lower disease rates. Other examples of culture affecting biology include reproductive behavior, attitudes towards mental health, and the use of natural remedies and medicines.
know more about biology.
https://brainly.com/question/28405832
#SPJ11
Please help! the hardy-weinberg equation is an expression showing the frequencies of 100 percent of the alleles for a specific gene in a population. which statement must be true if biologists show that both p and q are not changing over a period of time?
A. predators are killing individuals with certain traits.
B. mutations are occurring in the population.
C. there is no migration in the population.
D.the population is very small.
A red bloom cell has diameter of 0.008mm. a model of the red blood cell has a diameter of 80mm. What is the scale of the model
Scale of the model: 1:10,000. To find the scale of the model, we need to compare the size of the model to the actual size of the red blood cell. Given that the diameter of the red blood cell is 0.008mm and the diameter of the model is 80mm, we can calculate the scale by dividing the diameter of the model by the diameter of the actual cell.
Scale = Model diameter / Actual cell diameter
Substituting the given values:
Scale = 80mm / 0.008mm
Simplifying the expression:
Scale = 10,000
Therefore, the scale of the model is 1:10,000.
1. Identify the diameter of the red blood cell: 0.008mm.
2. Identify the diameter of the model: 80mm.
3. Use the formula Scale = Model diameter / Actual cell diameter.
4. Substitute the values into the formula: Scale = 80mm / 0.008mm.
5. Simplify the expression to find the scale: Scale = 10,000.
6. The scale of the model is 1:10,000, indicating that the model is 10,000 times larger than the actual red blood cell.
For more such questions on scale, click on:
https://brainly.com/question/28743660
#SPJ8
Using the cross-polarized light thin sections, identify some characteristics. For each sample label the phenocrysts present and answer the following questions:
1.) What are the main phenocrysts? What is the groundmass?
2.) Describe the textures present in the thin section (phenocrysts)
3.) Describe the textures present in the thin section (other)
4.) Using phenocryst and groundmass phases, what is the crystallization history of this rock?
1.) Main phenocrysts and groundmass composition varies by rock type.
2.) Phenocrysts exhibit diverse textures revealing growth history and conditions.
3.) Groundmass texture ranges from fine-grained to glassy, with additional features.
4.) Phenocryst and groundmass phases provide insight into rock's crystallization history.
1.) To identify the main phenocrysts and the groundmass in the thin section, you would need to observe the rock under cross-polarized light. Phenocrysts are larger crystals that are often embedded within a finer-grained groundmass. The specific identification and composition of phenocrysts and groundmass depend on the rock type you are analyzing.
2.) The textures observed in phenocrysts can vary depending on the rock type. They may exhibit crystal shapes, zoning, inclusions, fractures, or other features that provide information about their growth history and environmental conditions.
3.) The textures present in the thin section other than phenocrysts may include the groundmass, which is the finer-grained matrix surrounding the phenocrysts. The groundmass texture can range from fine-grained to glassy, depending on the rock type. Other features such as vesicles, microcrystalline structures, or mineral aggregates may also be observed.
4.) The crystallization history of a rock can be interpreted by studying the relationship between phenocrysts and the groundmass. Phenocrysts generally form earlier than the groundmass, indicating an earlier stage of crystallization. By examining the composition and relative timing of crystal growth, petrologists can infer the cooling and solidification history of the rock.
To learn more about phenocrysts follow the link:
https://brainly.com/question/32631453
#SPJ4
What effect does this change have on the frequency of the
light-colored genetic code in the mouse population?
The change in the environment would not affect the frequency of the light-colored genetic code in the mouse population.
Frequency of the light-colored genetic code in the mouse population would not be affected by a change in the environment. Light-colored genetic code in the mouse population is determined by genetic makeup and not the environment.
A change in the environment may change the survival rate of the population, however, it does not influence the frequency of the genetic makeup of the population. The genetic makeup of the population can change through genetic drift, mutation, and migration.
To know more about environment visit :
https://brainly.com/question/5511643
#SPJ11
In a wet year, grasshoppers on your pasture eat approximately 106.5 kg/acre every day (that’s ca. 235 lbs/acre/day). Knowing the fact that grasshoppers eat their own body mass in vegetation daily, and the average grasshopper on your land is 1 g, how many grasshoppers per square yard are on your pasture during this dry year?
In a dry year, there are 22 grasshoppers per square yard on your pasture, based on the fact that they eat their own body mass in vegetation daily.
To determine the number of grasshoppers per square yard on your pasture during the dry year, we'll need to convert the given information into appropriate units and perform the necessary calculations.
Convert the grasshopper's daily food consumption from kg/acre to kg/square yard. Since there are 4,840 square yards in an acre, we can calculate the grasshopper's daily food consumption per square yard as follows:
Food consumption per square yard = (Food consumption per acre) / (Number of square yards in an acre)
= 106.5 kg / 4,840 square yards
= 0.022 kg/square yard
To determine the weight of vegetation that a grasshopper eats in a day. Given that a grasshopper eats its own body mass in vegetation daily and the average grasshopper on your land weighs 1 g (0.001 kg), we can calculate the weight of vegetation consumed by a grasshopper in a day:
Weight of vegetation consumed by a grasshopper = Body mass of grasshopper = 0.001 kg
Now, we can find the number of grasshoppers per square yard by dividing the food consumption per square yard by the weight of vegetation consumed by a grasshopper:
Number of grasshoppers per square yard = Food consumption per square yard / Weight of vegetation consumed by a grasshopper
= 0.022 kg/square yard / 0.001 kg
= 22 grasshoppers/square yard
To learn more about vegetation follow the link:
https://brainly.com/question/33358022
#SPJ4
Specify the coordinate system (Cartesian, cylindrical, spherical) you would use, along with any relevant assumptions, when modeling transport processes in each of the following scenarios: loss of energy through a flat double-pane window C. transfer of dissolved oxygen from a culture medium into sphere-shaped cells the fluid motion produced when stirring coffee in a typical mug d. dissipation of energy from the skin of a tall and skinny person the velocity profile in waves about to crash on a flat shore f. heating of a cold bottle of alcoholic cider by a warm hand e
The rectangular coordinate system is another name for the Cartesian coordinate system. It is a system used in geometry that employs coordinates to establish the location of a geometric component (such a point, for instance). Each location in this system is described by two numerical coordinates.
The following coordinate systems are used in each of the given scenarios:
A. Loss of energy through a flat double-pane window Cartesian coordinate system is used to model transport processes in the scenario of energy loss through a flat double-pane window. The major assumptions include that the process is symmetrical, the heat transfer coefficient is uniform, and the heat transfer is two-dimensional.
B. Transfer of dissolved oxygen from a culture medium into sphere-shaped cells Spherical coordinate system is used to model the transport processes in the transfer of dissolved oxygen from a culture medium into sphere-shaped cells. The assumptions include that the rate of oxygen transfer is uniform, the cells are symmetrical, and the diffusivity of oxygen is constant.
C. Fluid motion produced when stirring coffee in a typical mug cylindrical coordinate system is used to model the transport processes of fluid motion produced when stirring coffee in a typical mug. The assumptions include that the flow is two-dimensional, the flow is symmetrical, and the viscosity of the fluid is constant.
D. Dissipation of energy from the skin of a tall and skinny person Cartesian coordinate system is used to model the transport processes in the dissipation of energy from the skin of a tall and skinny person. The assumptions include that the surface temperature is uniform, the surface is symmetrical, and the heat transfer coefficient is uniform.
E. Heating of a cold bottle of alcoholic cider by a warm hand cylindrical coordinate system is used to model the transport processes of heating of a cold bottle of alcoholic cider by a warm hand. The assumptions include that the flow is two-dimensional, the flow is symmetrical, and the viscosity of the fluid is constant.
F. Velocity profile in waves about to crash on a flat shore Spherical coordinate system is used to model the transport processes in the velocity profile in waves about to crash on a flat shore. The assumptions include that the waves are symmetrical, and the diffusivity is constant.
know more about coordinate systems.
https://brainly.com/question/4726772
#SPJ11
Please explain the formula in a detailed manner!!!
1.2 Explain both processes of double strand DNA breaking by irradiation according to molecular theory. Write the formula to calculate the DSB rate.
When double-strand DNA (dsDNA) breaks down under the influence of ionizing radiation, two mechanisms are commonly used: direct and indirect ionization. These approaches are consistent with molecular theory.
Direct ionization of the dsDNA sugar-phosphate backbone and base results in DNA damage by direct interaction of ionizing radiation with the DNA molecule. Single-strand DNA breaks (SSBs) and DSBs can occur as a result of direct ionization. On the other hand, indirect ionization causes the creation of reactive oxygen species (ROS) and other radicals through the interaction of ionizing radiation with water molecules. ROS and other radicals react with the dsDNA sugar-phosphate backbone and base, causing DNA damage, including SSBs and DSBs as a result of this process.
ROS have a greater impact on dsDNA than direct ionization since ROS can cause various lesions in DNA, such as base damage, sugar damage, and base-sugar crosslinks. Direct ionization of DNA may cause SSBs, which can be repaired without significant cellular consequences, but DSBs are the most significant form of DNA damage that has the potential to induce cell death or cancer.The formula for calculating DSB rate is given below .
To know more about DNA visit :
https://brainly.com/question/32072734
#SPJ11
You dig up a fossil of a human skull in Ethiopia. In nature, one normally finds that 1 out of every trillion carbon atoms is carbon-14, but the carbon in this human skull has only 1 in every 16 trillion atoms as carbon-14. Why is it so much less? (5 pts)
b) Given that the half-life of carbon-14 is 5760 years, calculate the age of the human skull. (10 pts)
a) The reason for the significantly reduced amount of carbon-14 in the human skull compared to what is typically found in nature could be attributed to the process known as radioactive decay.
b) Based on the amount of carbon-14 remaining in the human skull, its age is estimated to be approximately 23,040 years.
a) Carbon-14 is a radioactive isotope of carbon produced naturally in the atmosphere. It is incorporated into living organisms and decays after they die. With a half-life of 5760 years, the carbon-14 to carbon-12 ratio decreases over time. The lower carbon-14 ratio in the discovered human skull indicates a significant passage of time since the individual's death, as a large number of carbon-14 atoms have decayed into nitrogen-14, leaving behind a smaller proportion of carbon-14.
b) To calculate the age of the human skull based on the remaining carbon-14, we can use the concept of half-life. The half-life of carbon-14 is 5760 years, which means that every 5760 years, half of the carbon-14 atoms decay into nitrogen-14.
We can set up the following equation to calculate the age of the skull:
Remaining carbon-14 ratio = (Initial carbon-14 ratio) * [tex](0.5)^{(number of half-lives)[/tex]
In this case, the initial carbon-14 ratio is 1 in every 16 trillion atoms, and the remaining carbon-14 ratio is 1 in every trillion atoms.
Let's solve for the number of half-lives:
(1/16 trillion) * [tex](0.5)^{(number of half-lives)[/tex] = (1/trillion)
Simplifying the equation:
[tex](0.5)^{(number of half-lives)[/tex] = (1/16)
Taking the logarithm base 0.5 of both sides:
number of half-lives = log base 0.5 (1/16)
Using a logarithm calculator, we find:
number of half-lives = 4
Since each half-life is 5760 years, the age of the skull is:
Age = (number of half-lives) * (half-life duration)
Age = 4 * 5760
Age = 23,040 years
To learn more about carbon follow the link:
https://brainly.com/question/30233846
#SPJ4
The correct question is:
a) You dig up a fossil of a human skull in Ethiopia. In nature, one normally finds that 1 out of every trillion carbon atoms is carbon-14, but the carbon in this human skull has only 1 in every 16 trillion atoms as carbon-14. Why is it so much less?
b) Given that the half-life of carbon-14 is 5760 years, calculate the age of the human skull.
1. Does the root hairs from the Panicoideae subfamily
arise from tricoblasts epidermal cells?
2. If I were to take the entire plant home to view it under a
microscope, would I see a "perfect floret?"
1. Yes, root hairs in Panicoideae arise from trichoblasts' epidermal cells.
2. No, a "perfect floret" cannot be seen without isolation.
1. Yes, root hairs in the Panicoideae subfamily typically arise from specialized epidermal cells called trichoblasts. These trichoblasts undergo differentiation and elongation to form root hairs, which are thin, elongated projections that increase the surface area of the root for nutrient and water absorption.
2. No, if you were to view the entire plant under a microscope, you would not see a "perfect floret." A floret refers to the small individual flower in the inflorescence of grasses, including those in the Panicoideae subfamily. To observe the structure of a floret under a microscope, you would need to isolate and prepare a specific floret sample, not the entire plant.
To learn more about epidermal follow the link:
https://brainly.com/question/30670952
#SPJ4