which statement of the graph is true?

To solve for the missing value, we need to first find a common denominator for the fractions on the left side of the equation. The common denominator is (m - n)(m + n)(m - 1). Thus, we can write:

[(m - n) - ?]/[(m - n)(m + n)(m - 1)] = 2m/(m^2 - n^2)

Next, we can cross-multiply to eliminate the fractions:

[(m - n) - ?](m^2 - n^2) = 2m[(m - n)(m + n)(m - 1)]

Simplifying the right side of the equation:

2m[(m - n)(m + n)(m - 1)] = 2m(m - n)(m + n)(m - 1)

= 2m(m^2 - n^2)(m - 1)

Expanding the left side of the equation:

[(m - n)(m + n) - ?](m^2 - n^2) = (m - n)(m + n)(m - 1)

Distributing the left side of the equation:

(m - n)(m^2 - n^2 + ?) = (m - n)(m + n)(m - 1)

Canceling out the common factor (m - n):

m^2 - n^2 + ? = (m + n)(m - 1)

Expanding the left side of the equation:

? = (m + n)(m - 1) - (m^2 - n^2)

Simplifying the right side of the equation:

? = m^2 - m + n^2 + n - m^2 + n^2

= 2n^2 - m + n

Therefore, the missing value is ? = 2n^2 - m + n.

Answer:

Step-by-step explanation:

The distance that the plane can travel in 2x + 1 hours can be found by multiplying the plane's rate (x + 150 miles per hour) by the time (2x + 1 hours):

Distance = Rate × Time

Distance = (x + 150)(2x + 1)

Simplifying this expression, we can use the distributive property of multiplication:

Distance = 2x(x) + 2x(1) + 150(x) + 150(1)

Distance = 2x^2 + 2x + 150x + 150

Finally, we can combine like terms:

Distance = 2x^2 + 152x + 150

Therefore, the expression that represents the distance that the plane can travel in 2x + 1 hours is 2x^2 + 152x + 150.

To solve the equation √6x+3 = x-2, we can start by squaring both sides of the equation:

(√6x+3)² = (x-2)²

Simplifying the left side of the equation, we get:

6x+3 = (x-2)²

Expanding the right side of the equation, we get:

6x+3 = x² - 4x + 4

Moving all the terms to one side, we get a quadratic equation:

x² - 10x + 1 = 0

To solve this quadratic equation, we can use the quadratic formula:

x = (-b ± √(b² - 4ac)) / 2a

Where a = 1, b = -10, and c = 1. Plugging these values into the formula, we get:

x = (10 ± √(100 - 4))/2

x = (10 ± √96)/2

x = 5 ± 2√6

Therefore, the solutions to the equation √6x+3 = x-2 are x = 5 + 2√6 and x = 5 - 2√6.

The two equations that can be applied to the issue are as follows: A. 5 × 3 Equals 15 (multiplication) (multiplication) . B. 1/5 × 3 Equals 3/5 (multiplication and division) (multiplication and division)

An equation is a claim that two alternatives are equal in mathematics. The equals sign (=) is generally used to denote this claim. It is a mathematics assertion that two expressions are equal. Variables, constant, coefficients, and mathematical operations like addition, subtraction, multiply, and dividing can all be found in an equation. Finding the value(s) of both the variable(s) that render the equation true is the aim of an equation's solution.

given

Each of the five pears Kylie has is divided into thirds. She must therefore distribute the following quantity of pear slices to her teammates:

5 pears cut into 3 slices each equals 15 slices.

The two equations that can be applied to the issue are as follows: A. 5 × 3 Equals 15 (multiplication) (multiplication) . B. 1/5 × 3 Equals 3/5 (multiplication and division) (multiplication and division) .

To know more about equation visit:

https://brainly.com/question/649785

#SPJ1

Replacing x with x + 2 means that the graph of f(x) = |x - 4| will be translated 2 units left.

A translation happens when either a figure or a function is moved horizontally or vertically on the coordinate plane.

The four translation rules for functions are defined as follows:

The change from x to x + 2 means that we calculated f(x + 2), thus the graph is translated 2 units left.

More can be learned about translations at brainly.com/question/28174785

#SPJ1

The residual of the data for this new baby is 0.7

What is a linear equation?

An equation is said to be linear if the maximum power of the variable is consistently 1. Another name for it is a one-degree equation. A linear equation with one variable has the conventional form Ax + B = 0. In this case, the variables x and A are variables, while B is a constant. A linear equation with two variables has the conventional form Ax + By = C. Here, the variables x and y, the coefficients A and B, and the constant C are all present.

Here, we have

Given: A clinic has recorded the age, x, versus weight, y, of many babies for their first 12 months of life, and claims the line of best fit is ŷ = 0.60x + 3.3, where y is in kg, and x is in months.

ŷ = 0.60x + 3.3

Substitute, x=10

ŷ = 0.60(10) + 3.3   = 9.3

Residual =  y - ŷ  = 10 – 9.3 = 0.7

Hence, the residual of the data for this new baby is 0.7

To learn more about the linear equation from the given link

https://brainly.com/question/28732353

#SPJ1

The scatterplot of the Median Value of Used Car Sales (in billions of pounds) to the Median Volume of Used Cars Sold (in millions) indicates;

(a) Independent variable; Median Volume of Used Cars Sold

Dependent variable; Median Value of Used Car Sales

(b) The median is less sensitive to outliers in the data than the mean

(c) The estimate of the median value is 20 billion pounds

(d) The predicted median value is about £28.185

(e) The other factors includes; The age, condition and location of the car, and the availability of financing.

A scatterplot is a mathematical diagram or plot on Cartesian coordinates to display values of data points containing two variables in a dataset.

(a) The vertical axis of the scatter plot is the median value of used car sales in billions of pounds. The horizontal axis is the median volume of used cars sold in millions. Therefore;

(b) The variability of the values in the scatter plot indicates that the possibility for outliers in the data.

The median value and median volume are used instead of the mean because of the lower sensitivity of the median to the outliers than the mean. The median is defined as the middle value in a set of data while the mean is the average of all the values in a dataset. Whereby the dataset consists of outliers, the outliers can skew the mean, while the outliers do not affect the median.

(c) The median value of the data point on the graph that corresponds to the 2.3 million median volume of used car sold is about 20 billion pounds. Therefore;

(d) The equation for the median value of used car sales, value = 30.97 - 1.211 × Volume, indicates that if the volume of used cars sold is 2.3 million, we get;

Value = 30.97 - 1.211 × 2.3 ≈ 28.185

Therefore, using the equation, 30.97 - 1.211 × Volume;

(e) The other factors beside the price of the used cars that influence the volume of used cars sold includes the following factors,

The age of the car

The car's condition

The car's location

The availability of financing

Learn more on scatterplots here: https://brainly.com/question/29788637

#SPJ1

Therefore , the solution of the given problem of equation comes out to be (-x² + 3x + 2) / (x² - 18x - 12) = -x + 15.

Variable words are commonly used in complex algorithms to show consistency between two contradictory claims. Academic expressions called equations are used to show the equality of various academic numbers. Instead of another algorithm that can analyze data given by y + 7, split 12 to two parts, and produce y + 7, leveling produces b + 7 in this instance.

Here,

We can use long division to determine the quotient of the given polynomial division problems. Let's begin with the initial issue:

    2x² - 5x

-6x | 6x³ - 18x² - 12x + 0

      - (6x³ - 18x²)

      ----------------

                   0 - 12x²

                   - (-12x² + 0x)

                   ---------------

                                0 - 12x

                                - (0 - 12x)

                                ----------

                                         0

As a result, 2x2 - 5x is the result of (6x3 - 18x2 - 12x) / (-6x).

Let's now turn our attention to the second issue:

     -x + 15

x² - 18x - 12 | -x² + 3x + 2

               x² - 15x

               --------

                       18x + 2

                       18x - 270

                       --------

                              272

As a result, -x + 15 is the result of (-x² + 3x + 2) / (x² - 18x - 12).

Thus, the ultimate responses are:

(6x³ - 18x² - 12x) / (-6x) = 2x² - 5x

(-x² + 3x + 2) / (x² - 18x - 12) = -x + 15

To know more about equation visit:

https://brainly.com/question/649785

#SPJ1

the total number of seats available is 45,000. just by using graph percentage and given information we are able to get answer

what is percentage?

A percentage is a way of expressing a number as a fraction of 100. It is represented by the symbol % (per cent), which means "per hundred".For example, if we say that a student scored 80% on a test, it means that they got 80 out of 100 possible points.

In the given question,

We know that the number of box seats available is 12,600 and the number of club seats available is 5,400.

Let's use the information about the percentages of grandstand and bleacher seats to find their actual numbers.

If grandstand seats make up 42% of the total seats, then we can write:

Grandstand seats = 0.42 x Total seats

Similarly, if bleacher seats make up 18% of the total seats, we can write:

Bleacher seats = 0.18 x Total seats

We can now add up the number of seats in each category to find the total number of seats:

Total seats = Box seats + Club seats + Grandstand seats + Bleacher seats

Total seats = 12,600 + 5,400 + 0.42 x Total seats + 0.18 x Total seats

Simplifying the equation, we get:

Total seats = 18,000 + 0.6 x Total seats

0.4 x Total seats = 18,000

Total seats = 45,000

Therefore, the total number of seats available is 45,000..

To know more about percentage , visit:

https://brainly.com/question/29306119

#SPJ1

The average amount of money spent for lunch per person in the college cafeteria is $6.45 and the standard deviation is $2.55. Suppose that 44 randomly selected lunch patrons are o

population mean is 6.45

population standard deviation is 2.55.

sample size is 44.

z-score is indicated because you are using population standard deviation and sample size is greater than 30.

The z-score formula is [tex](x - m) / s[/tex]

in this case, x is the sample mean, m is the population mean, s is the standard error.

[tex]standard error = standard deviation / sqrt(sample size0 = 2.55 / sqrt(44) = .3844[/tex] rounded to 4 decimal places.

z-score formula becomes [tex]z = (x - 6.45) / .3844[/tex]

solve for x to get:

[tex]x = .3844 * z + 6.45[/tex]

since you don't have a z-score, you can't find x.

the best you can do is find the critical z-scores, and hence, the critical raw scores.

In order to do that you need to to know the confidence level.

if you know that, you can find the critical z-scores and, from that, the critical x-scores.

we'll compare two confidence levels.

the first is at 99% confidence level.

the second is at 90% confidence level.

with a 99% two-tail confidence level, the critical z-scores are plus or minus 2.5758 rounded to 4 decimal places.

the critical raw scores are found by using the z-score formula.

you get [tex]x = .3844 * 2.5758 + 6.45 = 7.4401[/tex] for the high score.

you get x = [tex].3844 * -2.5758 + 6.45 = 5.4599[/tex] for the low score.

the 99% two-tail confidence level tells you that 99% of your samples of size 44 will have the sample mean between 5.4599 and 7.4401.

that's your 99% confidence interval.

with a 95% two-tail confidence level, the critical z-scores are plus or minus 1.9600 rounded to 4 decimal places.

the critical raw scores are found by using the z-score formula.

you get [tex]x = .3844 * 1.9600 + 6.45 = 7.2034[/tex] for the high score.

you get[tex]x = .3844 * -1.9600 + 6.45 = 5.6966[/tex] for the low score.

the 95% two-tail confidence level tells you that 95% of your samples of size 44 will have the sample mean between 5.6966 and 7.2034.

that's your 95% confidence interval.

the higher the confidence level, the wider the confidence interval when you are dealing with the same population mean and population standard deviation and same sample size.

To know more about standard deviation visit:

brainly.com/question/23907081

#SPJ1

Correct and complete question:

The average amount of money spent for lunch per person in the college cafeteria is $6.45 and the standard deviation is $2.55.

Suppose that 44 randomly selected lunch patrons are observed.

Assume the distribution of money spent is normal, and round all answers to 4 decimal places where possible.

b. What is the distribution of x?

x-N(6.45,_________________)

Parents Card = 1/6 cards Glen has. 1/6=0.1666667, as a percet 16.6667%

Sister Card = 1/6 cards Glen has. 1/6=0.1666667, as a percet 16.6667%

The bias of the estimator is 1/45, so correct option is A.

In mathematics, a proportion is a statement that two ratios are equal. A ratio is a comparison of two quantities, expressed as a fraction or a division of one quantity by another.

For example, the proportion "a/b = c/d" means that the ratio of a to b is equal to the ratio of c to d. This can also be written as "a : b = c : d", where the colon (:) represents the ratio symbol.

Proportions can be used to solve a variety of problems, such as finding unknown quantities in a ratio or comparing quantities that have different units. For instance, if a recipe calls for 2 cups of flour for every 3 cups of water, we can use proportions to determine how much flour and water we need if we want to make a larger or smaller batch.

The estimator for the true proportion of residents in support of the bypass road construction is given by:

p = (X + √2025/2) / 2025

We can see that this estimator involves adding √2025/2 to X, and then dividing the sum by 2025. Since √2025 = 45, we can simplify the estimator as:

p = (X + 45/2) / 2025

Now, we can find the expected value of the estimator:

E[p] = E[(X + 45/2) / 2025]

= (E[X] + 45/2) / 2025

To find the bias of the estimator, we need to compare its expected value to the true value of the parameter being estimated. Since we are estimating the proportion of residents in support of the bypass road construction, the true value of the parameter is the population proportion, denoted by p.

If the estimator is unbiased, then its expected value must equal the true value of the parameter, i.e., E[p] = p. Therefore, we have:

E[p] = (E[X] + 45/2) / 2025 = p

Solving for E[X], we get:

E[X] = 2025p - 45/2

Thus, the bias of the estimator is:

Bias[p] = E[p] - p

= (E[X] + 45/2) / 2025 - p

= [(2025p - 45/2) + 45/2] / 2025 - p

= (2025p - p) / 2025

= 44/2 x 2025

= 1/45

Therefore, the bias of the estimator is 1/45. Answer: A.

To know more about estimator visit:

https://brainly.com/question/29436481

#SPJ1

The bias of the estimator is 1/45. The appropriate choise for the posed query is option (a).

In mathematics, a proportion is the assertion that both ratios are equal. A ratio is the division of one quantity by another or the comparison of two quantities given as a fraction.

The ratio "a/b = c/d," for instance, denotes that the ratio of a to b is equivalent to the ratio of c to d. This can also be expressed as "a: b = c: d," where the ratio sign is denoted by the colon (:).

Numerous issues can be resolved using proportions, like comparing amounts with various units or locating unknown values in a ratio. For instance, we may use proportions to calculate the amount of flour and water needed to make a larger or smaller batch of a recipe if it calls for 2 cups of flour and 3 cups of water.

The estimator for the actual percentage of residents in favour of building the bypass route is provided by:

p = (X + √2025/2) / 2025

As we can see, this estimator multiplies X by 2025/2 before dividing the result by 2025.

Since √2025 = 45, The estimator may be distilled down to:

p = (X + 45/2) / 2025

We can now determine the estimator's expected value:

E[p] = E[(X + 45/2) / 2025]

= (E[X] + 45/2) / 2025

We must contrast the estimator's expected value with the actual value of the parameter being estimated in order to determine its bias. The population proportion, given by p, is the genuine value of the parameter because we are calculating the percentage of residents who support the construction of the bypass route.

If the estimator is impartial, then its predicted value must match the parameter's true value, or E[p] = p. As a result, we have:

E[p] = (E[X] + 45/2) / 2025 = p

Solving for E[X], we get:

E[X] = 2025p - 45/2

As a result, the estimator's bias is:

Bias[p] = E[p] - p

= (E[X] + 45/2) / 2025 - p

= [(2025p - 45/2) + 45/2] / 2025 - p

= (2025p - p) / 2025

= 44/2 x 2025

= 1/45

As a result, the estimator's bias is 1/45. Answer: A.

To know more about proportion, visit:

https://brainly.com/question/1496357

#SPJ1

Answer:

A'(2, 3)

Step-by-step explanation:

When a point is reflected across the x-axis, its y-coordinate is negated while its x-coordinate remains unchanged.

Therefore, reflecting point A(2,-3) across the x-axis results in a new point with the same x-coordinate but a negated y-coordinate:

A'(2, 3)

So the coordinates of the reflected point A' are (2, 3).

For the given functions of x Table 2 is a one to one function. Table 2 is not a one to one function. Table 3 is not a one to one function.

A one-to-one function is one in which every distinct input (or x-value) corresponds to a distinct output (or y-value). To put it another way, no two distinct inputs may result in the same outcome. Also, the same input cannot result in more than one output.

Injective functions are another name for one-to-one operations. They are crucial in many branches of mathematics, such as geometry, algebra, and calculus. A function's inverse, or new function that "undoes" the previous function by flipping the input and output variables, is defined in particular using one-to-one functions.

Table 1:

Because each x-value corresponds to a distinct y-value and each y-value to a unique x-value, Table 1 depicts y as a function of x and is one-to-one.

Table 2:

Because there are two separate y-values associated with the x-value of 10, Table 2 does not show y as a function of x. (8 and 12).

Table 3:

Because the y-value of 8 has two separate x-values, Table 3 does not show y as a function of x. (10 and 13).

Learn more about one to one function here:

https://brainly.com/question/29256659

#SPJ1

The lengths of the variables are 17. x = 14√2, 18. x = 22.5√2, 19. x = 22√2, 20. x = 105√2 and other solutions are listed below

Question 17 - 22

In a 45-45-90 triangle, also known as an isosceles right triangle, the two legs (the sides opposite to the two 45-degree angles) are congruent and the hypotenuse (the side opposite to the 90-degree angle) is equal to the √2 times the length of either leg.

Using the above, we have the following values

17. x = 14√2

18. x = 22.5√2

19. x = 22√2

20. x = 105√2

21. x = 88√2

22. x = 10

Question 23

Here, we have

sin(30) = 9/x

x = 18

y² = 18² - 9²

y² = 9√3

Question 24

Here, we have

cos(60) = y/4√3

y = 2√3

x² = (4√3)² - (2√3)²

x = 6

Question 25

Here, we have

sin(30) = 20/y

y = 40

x² = (40)² - (20)²

x = 20√3

Question 26

Here, we have

cos(60) = x/98

x = 49

y² = (98)² - (49)²

y = 49√3

Question 27

Using the definition above, we have

Leg = 38/√2

Leg = 19√2

Question 28

Using the definition above, we have

Hypotenuse = 77√2

Question 29

For the equilateral triangle, we have

Triangle length = x

This gives

tan(60) = 33/(x/2)

So, we have

x/2 = 33/tan(60)

x/2 = 33/√3

x = 22√3

So, the side lengths are 22√3 feet long

Question 30

Here, we have

Side length = 150 ml

So, the hypotenuse is

Hypotenuse = 150√2

Read more about right triangles at

https://brainly.com/question/2437195

#SPJ1

Answer:

Space explorer A traveled about 77,000 miles in roughly 10 hours.

Step-by-step explanation:

space traveler b travels about 155 miles faster per hour than space traveler A

The answer of the given question based on the  confidence interval is , it suggests that the drug treatment has significantly reduced the mean wake time , the drug appears to be effective in treating insomnia in the older subjects.

Mean is a statistical measure of central tendency that represents the average of a set of numerical values. It is also referred to as the arithmetic mean or simply "the average." To calculate the mean, we add up all the values in the set and divide the sum by the number of values.

To construct the 99% confidence interval estimate of the mean wake time for a population with the treatment, we can use the following formula:

CI = x⁻ ± tα/2 (s/√n)

where x⁻ is the sample mean (94.9 min), s is the sample standard deviation (24.3 min), n is the sample size (19), and tα/2 is the critical t-value with α = 0.01/2 and degrees of freedom (d f) = n - 1.

The degrees of freedom for this sample is d f = 19 - 1 = 18. Using a t-table or a t-distribution calculator, we find that t0.005,18 = 2.878, where 0.005 is the tail probability for a 99% confidence interval (α/2 = 0.005).

Plugging in the values, we get:

CI = 94.9 ± 2.878 * (24.3/√19) = (80.36, 109.44)

Therefore, we can say with 99% confidence that the mean wake time for a population with the drug treatment falls between 80.36 and 109.44 minutes.

Regarding the mean wake time of 104.0 min before the treatment, we can compare it with the lower bound of the confidence interval (80.36 min). Since the lower bound is much lower than 104.0 min, it suggests that the drug treatment has significantly reduced the mean wake time.

Therefore, based on the confidence interval estimate, the drug appears to be effective in treating insomnia in older subjects.

To know more about Probability visit:

https://brainly.com/question/12629667

#SPJ1

Therefore option c is the best answer:

Define  weight?

Weight is a measure of the force exerted on an object due to gravity. It is proportional to the mass of the object and the acceleration due to gravity. The standard unit of weight is the Newton (N) in the International System of Units (SI).

What exactly is MASS?

Mass is a measure of the amount of matter in an object. It is a scalar quantity and is usually measured in kilograms (kg) in the International System of Units (SI).

A box had 6pencils each pencil wt. x gram.

The 6pencil wt. a combined total is 54 gram.

To know more about mass visit:



brainly.com/question/19694949

#SPJ1

Cost of Products Sold is equal to $111,100 minus $97,400, or 13,700 as the formula for Net Income, the amount is $74,100.

The word "amount" in mathematics typically denotes the number or size of something that can be counted, measured, or computed. It is applicable to several fields, including geometry, arithmetic, algebra, statistics, and calculus. An amount, for instance, can also be used to describe the sum of a group of numbers after addition. An unknown number or value that needs to be factored into an equation in algebra is referred to as an amount.

given

(a) Gross Profit = Sales Revenue - Cost of Items Sold ($83,00)

When provided, Gross profit equals $32,700, therefore

Cost of Goods Sold is equal to $83,000 - $32,700 ($50,300).

Running Costs = $18,300

Operational costs minus Gross Profit gives you Net Income.

$32,700 - $18,300 = $14,400 is the net income.

Sales revenue equals $111,100 in (b).

Sales revenue minus gross profit equals cost of goods sold.

When provided, Operational Costs = $23,300, yet there is no gross profit, so:

Sales revenue minus costs of goods sold equals gross profit.

Total Revenue = $111,100 - Selling Prices for Items

Operational expenses minus gross profit equals $74,100 in net income.

Using the formula for Net Income, the amount is $74,100: Gross Profit - $23,300

Gross Profit: $97,400 ($74,100 + $23,300).

Cost of Products Sold is equal to $111,100 minus $97,400, or 13,700 as the formula for Net Income, the amount is $74,100.

To know more about amount visit :-

brainly.com/question/8082054

#SPJ1

After answering the provided question, we can conclude that  To circle complete the copied triangle, draw a polygon through points D, E, and F.

A circle appears to be a two-dimensional component that is defined as the collection of all points in a jet that are equidistant from the hub. A circle is typically depicted with a capital "O" for the centre and a lower section "r" for the radius, which is the distance from the origin to any point on the circle. The formula 2r gives the girth (the distance from the centre of the circle), where (pi) is a proportionality constant roughly equal to 3.14159. The formula r2 computes the circumference of a circle, which refers to the amount of space inside the circle.

Follow these steps to duplicate the original triangle using only two of its sides and the included angle:

Find the point where the ray and the circle intersect. Place the tip of the compass at point E and draw an arc that intersects the circle twice. Label the point that is on the same side of side AC as point B as point F.

To complete the copied triangle, draw a polygon through points D, E, and F.

To know more about circle visit:

https://brainly.com/question/29142813

#SPJ1

Answer:

Step-by-step explanation:

let l = the length of the rectangle

area of the rectangle (A) = 13 * l

Answer:

---------------------------------

See the attached, where the given distance is copied over each option. Since the whole distance is 4 times the 1/4 of the distance, the correct choice is C.

Answer: p=50 h=2

Step-by-step explanation:

so its 50 x 2=100 is the answer then u add 3

4,110 cm³ of beverage needs to be added to fill the dispenser completely.

The beverage dispenser is a rectangular prism, so we need to use the formula of volume of a rectangle prism to find the total amount of beverage in the dispenser. Now subtract the amount of beverage initially the dispenser have from the total amount of beverage dispenser.

Here we have

A beverage dispenser at a party measured 14 cm x 13 cm x 60 cm.

Before it was filled the beverage dispenser was only 5/8 full.

The total volume of the beverage dispenser can be calculated by multiplying its dimensions:

V_total = 14 cm x 13 cm x 60 cm = 10,920 cm³

If the dispenser was only 5/8 full, then the remaining volume that needs to be filled will be equal to 3/8  

V_remaining = (3/8) x V_total = (3/8) x 10,920 cm³ = 4,110 cm³

Therefore,

4,110 cm³ of beverage needs to be added to fill the dispenser completely.

Learn more about Volume of dispenser at

https://brainly.com/question/3001656

#SPJ1

The probability of exactly 2 nurses preferring the night shift in a random sample of 10 nurses is approximately 0.302 or 30.2%.

A sort of probability distribution known as a binomial probability defines the likelihood of a certain number of successes (or "positive outcomes") in a predetermined number of independent trials with just two potential outcomes (often referred to as "success" and "failure").

According to the given information:

This is a binomial probability problem since we have a fixed number of trials (sampling 10 nurses) and two possible outcomes (nurses preferring or not preferring the night shift) with a known probability of success (20% or 0.2).

The probability of getting exactly 2 nurses who prefer the night shift can be calculated using the following formula:

P(X = k) = (n choose k) *[tex]p^{k} *(1-p)^{n-k}[/tex]

where:

P(X = k) is the probability of getting k successes (2 nurses who prefer the night shift)

n is the total number of trials (10 nurses)

k is the number of successes we want (2 nurses who prefer the night shift)

p is the probability of success (0.2, or 20%)

(n choose k) is the number of ways to choose k items from a set of n items, which can be calculated using the binomial coefficient formula: (n choose k) = n! / (k! * (n-k)!)

Substituting the values into the formula, we get:

P(X = 2) = (10 choose 2) * [tex]0.2^2 * 0.8^8[/tex]

= 45 * 0.04 * 0.16777216

= 0.301989888

Therefore, the probability of exactly 2 nurses preferring the night shift in a random sample of 10 nurses is approximately 0.302 or 30.2%.

To know more about binomial probablity visit:

https://brainly.com/question/29350029

#SPJ1

Answer: $4.40 is the cost for the call

a) the initial condition as 0 kg sugar in the tank at time = 0 (pure water)

b) with the net rate of change the amount of sugar after t minutes is S(t) = 236.8 [1 - e (t/740)]

c) time goes to infinity, the amount of sugar in is 236.8 kg.

a) Let A(t) denote the amount of sugar in the tank at time. The tank starts with only pure water, so A(0) = 0 OR you can say that you give the initial condition as 0 kg sugar in the tank at time = 0 (pure water)

b) Sugar flows in at a rate of (0.07 kg/L) * (7 L/min) = 0.49 kg/min = 49/100 kg/min and flows out at a rate of (A(t)/1080 kg/L) * (7 L/min) = 7A(t)/1080 kg/min, so that the net rate of change of is governed by the ODE, multiply both sides by the integrating factor  to condense the left side into the derivative of a product, if t = time and S(t) is the amount of sugar in the tank as a function of time, then the equation that we get is S(t) = 236.8 [1 - e (t/740)]

c) As t---> ∞, the exponential term converges to 0 and we're left with the means when time goes to infinity, the amount of sugar in is 236.8 kg.

To learn more about rate, click here:

brainly.com/question/29781084

#SPJ4

Answer: To find the vertical asymptotes of the given function, we need to find the values of x that make the denominator equal to zero. So, we set each denominator equal to zero and solve for x:

(x-3)(x-1)² = 0

x = 3 or x = 1

Therefore, the vertical asymptotes of the function occur at x = 3 and x = 1.

To find the horizontal asymptotes, we need to look at the degree of the numerator and denominator. Since both the numerator and denominator are degree 2, we can find the horizontal asymptote by dividing the leading coefficient of the numerator by the leading coefficient of the denominator. In this case, the leading coefficient of both the numerator and denominator is 1, so the horizontal asymptote is y = 1/1 = 1.

Therefore, the vertical asymptotes are x = 3 and x = 1, and the horizontal asymptote is y = 1.

Step-by-step explanation: