Which reaction illustrates conservation of mass?
A.
2 Cu + O2 → 2 CuO
B.
Fe + H2O → Fe3O4 + H2
C.
CH4 + Br2 → CBr4 + HBr

This question is asking for the sensitivity of a force sensor, which is the voltage output (V) perforce input (N). The force sensor provides the following voltage outputs for force inputs from 0 to 5 N: 0.4 N.


To determine the sensitivity of a force sensor in volts per newton, the following formula may be used: Sensitivity = (Vmax - Vmin) / Fmax - FminWhere: Vmax is the maximum voltage output of the sensor. F max is the maximum force input of the sensor. Vmin is the minimum voltage output of the sensor.

Fmin is the minimum force input of the sensor. The question provides a force sensor's voltage output for force inputs ranging from 0 to 5 N, but the values for Vmax, Vmin, Fmax, and Fmin must be determined before using the formula. The question does not provide these values.

However, the sensitivity can be estimated by selecting the values closest to Vmax, Vmin, Fmax, and Fmin in the data provided. Sensitivity = (1.5 V - 0 V) / 5 N - 0 NSensitivity = 0.4 V/NThe sensitivity of the force sensor is 0.4 V/N.

Read more about voltage :

https://brainly.com/question/1176850

#SPJ11

The electric field in the copper wire is approximately 0.0227 V/m.

The drift velocity of free electrons in a copper wire is related to the electric field in the conductor by the following formula,

v_d = (e * E * τ) / m

where v_d is the drift velocity, e is the charge of an electron, E is the electric field strength, τ is the relaxation time of the electrons, and m is the mass of an electron.

Solving for E, we get,

E = (m * v_d) / (e * τ)

Substituting the given values for copper, we get,

E = (9.11 x 10^-31 kg * 7.94 x 10^-4 m/s) / (1.60 x 10^-19 C * 2.0 x 10^-14 s)

E = 0.0227 V/m (rounded to four significant figures)

To know more about electric field, here

brainly.com/question/12911661

#SPJ4

The answer is "work is done". When a system moves an object over a distance, work is done.

What is Energy?

Energy is a property or characteristic of objects, substances, or systems that enables them to do work or cause change. It is an abstract concept that describes the potential or ability of a physical system to perform work, and it comes in many different forms, including kinetic energy, potential energy, thermal energy, electromagnetic energy, and nuclear energy. Energy is conserved in nature, meaning that it can neither be created nor destroyed, but only transformed from one form to another.

Work is the transfer of energy that occurs when a force is applied to an object and causes it to move. In this case, the force applied by the system causes the object to move over a distance, and energy is transferred from the system to the object. This energy transfer can take many forms, including kinetic energy, potential energy, and thermal energy. In some cases, heat may be generated as a result of the energy transfer, but this is not always the case.

Learn more about Energy from given link

https://brainly.com/question/13881533

#SPJ1

Tension of approximately 2.7 x 10^20 N, will be observed in the cable.

If the Moon were held in its orbit by a long, mass-less cable attached to the center of the Earth, the tension in the cable would be equal to the force needed to keep the Moon in its circular path around the Earth. This force is the centripetal force, which is given by the equation,

Fc = mv^2/r

where Fc is the centripetal force, m is the mass of the Moon, v is the velocity of the Moon in its orbit, and r is the radius of the Moon's orbit.

The velocity of the Moon in its orbit can be calculated using the equation,

v = 2πr/T

where T is the period of the Moon's orbit.

Using the known values for the mass of the Moon, the radius of its orbit, and the period of its orbit, the tension in the cable can be calculated using the above equations. The result is a tension of approximately 2.7 x 10^20 N, which is an incredibly large force that is not physically possible to achieve with current technology.

To know more about Earth, here

brainly.com/question/20490748

#SPJ4

To determine the total power delivered to the circuit (i.e., the total power dissipated in the resistors), you can use the formula:

P = I²R ; where P is the power in watts, I is the current in amperes, and R is the resistance in ohms.

To find the current, you can use Ohm's law:

V = IR

where V is the voltage in volts, I is the current in amperes, and R is the resistance in ohms.

Here's an example:

Suppose you have a circuit with two resistors, R1 and R2, connected in series.

The voltage across the circuit is 10 volts, and the resistances of the two resistors are 2 ohms and 4 ohms, respectively. You can find the total resistance of the circuit by adding the resistances of the two resistors:

R = R1 + R2 = 2 + 4 = 6 ohms

To find the current in the circuit, you can use Ohm's law:

I = V/R = 10/6 = 1.67 amps

Then, you can find the power dissipated in each resistor:

P1 = I²R1 = (1.67)²(2) = 5.56 wattsP2 = I²R2 = (1.67)²(4) = 11.11 watts

And finally, you can find the total power dissipated in the circuit by adding the power dissipated in each resistor:Ptotal = P1 + P2 = 5.56 + 11.11 = 16.67 watts

So the total power delivered to the circuit is 16.67 watts.

Learn more about total power here:

https://brainly.com/question/21671958#

#SPJ11

The second law of thermodynamics states that energy spontaneously flows from high-temperature objects to low-temperature objects until the temperatures are balanced or equal.

The energy quality is reduced when energy changes from one form to another, making it difficult to transform from one form of energy to another, reducing the efficiency of energy conversion.

The second law of thermodynamics is critical to the understanding of energy conversions because it provides a quantitative measure of energy quality, which relates to the ease with which it can be used to perform work.

According to the second law of thermodynamics, the quality of energy tends to degrade over time, resulting in a reduction in efficiency when converting one form of energy to another.

Read more about the topic of laws of thermodynamics:

https://brainly.com/question/13164851

#SPJ11

The magnetic lines of force flowing into and out of magnets cause magnets held close to each other to have a magnetic force. When a magnet is close to another magnet, magnetic lines of force will move between them. As a result, the magnets will attract or repel each other.

In the presence of a magnet, the magnetic lines of force are curved. The magnetic force is produced as a result of the presence of magnetic lines of force. The force is felt between magnets, which may either attract or repel each other. The direction of magnetic lines of force is from the North Pole of a magnet to the South Pole of the magnet.

An explanation for the magnetic lines of force:

A magnet is a type of material that creates a magnetic field, which is caused by the movement of electrons in its atoms. When a magnetic field is created by a magnet, the magnetic lines of force are said to be present. The direction of the lines of force is from the North Pole to the South Pole. The lines are also said to be curved, which is caused by the shape of the magnetic field.

To know more about the "magnetic lines of force": https://brainly.com/question/2279150

#SPJ11

Enceladus, Saturn's volcanically active moon, is likely being powered by tidal heating because of its unique geological features and position in relation to Saturn.

Tidal heating is a process that occurs when the gravitational forces between two celestial bodies cause the internal structure of one or both bodies to heat up, producing volcanic activity and other geologic features.

Enceladus is located very close to Saturn and is constantly being tugged by the planet's gravitational forces, causing the moon to flex and bend as it orbits.

This tidal flexing generates friction within the moon's interior, which in turn generates heat. This heat is what is thought to be responsible for the volcanic activity observed on Enceladus.

In addition to its position relative to Saturn, Enceladus also has a unique geological feature that supports the idea of tidal heating.

The moon has a series of fractures on its surface known as "tiger stripes," which are believed to be the result of the internal heating caused by tidal forces.

These fractures release jets of water vapor and other material into space, providing evidence of the moon's volcanic activity.

The evidence suggests that Enceladus is being powered by tidal heating. T

This process is not unique to Enceladus; other moons in our solar system, such as Jupiter's Io and Neptune's Triton, are also believed to be volcanically active due to tidal heating.

to know more about tidal heating refer here:

https://brainly.com/question/13963046#

#SPJ11

The spring will stretch by an amount equal to 54 N divided by the spring constant, k.

The spring constant, k, is a constant for a particular spring and determines the amount of force necessary to stretch the spring a certain amount. If the spring does not reach its elastic limit, then the amount it will stretch is equal to the amount of force applied divided by the spring constant. In this case, the amount the spring will stretch is equal to 54 N divided by the spring constant, k.
For example, if the spring constant is 10 N/m, then the spring will stretch by an amount of 5.4 m. This means that when 54 N of force is applied, the spring will stretch by 5.4 m.
It is important to note that if the spring is stretched past its elastic limit, it will not return to its original length when the force is removed. Therefore, it is important to ensure that the spring is not stretched past its elastic limit when determining how much it will stretch.
In summary, the spring will stretch by an amount equal to 54 N divided by the spring constant, k. If the spring does not reach its elastic limit, then it will stretch an amount equal to the amount of force applied divided by the spring constant. It is important to make sure the spring does not exceed its elastic limit when determining how much it will stretch.

For more such questions on Springs.

https://brainly.com/question/14203117#

#SPJ11

The car battery has a higher energy content than a motorcycle battery.

A car battery and a motorcycle battery both produce a voltage of 12 V, but the car battery is capable of moving 10x as much charge. The motorcycle battery is also more compact in size.

Energy content is the total amount of energy in a system, and it is given in joules. The battery's energy content is determined by the voltage and charge the battery can produce. The higher the charge and voltage, the higher the battery's energy content. Hence, the battery that has a higher charge and voltage has a higher energy content.A car battery and a motorcycle battery both produce a voltage of 12 V, but the car battery is capable of moving 10x as much charge.

Since the car battery can carry ten times as much charge as the motorcycle battery, it has a higher energy content. It can, for example, power a car for longer than a motorcycle battery. Even though the motorcycle battery is smaller in size, the car battery is more efficient and can store more energy since it can carry more charge.Battery power and capacity are two different things, and a battery that can store more power may not have a higher energy content.

A higher power battery can supply more energy for a brief period, whereas a higher energy battery can sustain a lower output over a more extended period. The amount of energy required for any specific job determines the battery you require. A motorcycle battery is intended for less-demanding tasks than a car battery.

Hence, the car battery has a higher energy content than a motorcycle battery.

Learn more about Voltage

brainly.com/question/29445057

#SPJ11

When Jupiter and Saturn are in the same line, the total gravitational force due to them is approximately 2.571 x 10^23 N.

To calculate the gravitational force between two giant planets, Jupiter and Saturn, when they are in the same line, we can use Newton's Law of Gravitation:

F = G * (m1 * m2) / r^2

where F is the gravitational force between the two planets, G is the gravitational constant, m1 and m2 are the masses of the two planets, and r is the distance between their centers.

To find the total gravitational force, we need to add the gravitational force due to Jupiter and the gravitational force due to Saturn. Since the planets are in the same line, the distance between them will be the distance between their centers minus the sum of their radii.

Let's assume the following values for the masses and radii of the two planets:

Mass of Jupiter (m1) = 1.898 x 10^27 kg

Mass of Saturn (m2) = 5.683 x 10^26 kg

Radius of Jupiter (r1) = 6.991 x 10^7 m

Radius of Saturn (r2) = 5.823 x 10^7 m

We can use these values to calculate the distance between the centers of the two planets:

distance = distance between centers - (radius of Jupiter + radius of Saturn)

distance = 7.78 x 10^11 m - (6.991 x 10^7 m + 5.823 x 10^7 m)

distance = 7.04 x 10^11 m

Now, we can use Newton's Law of Gravitation to calculate the gravitational force due to each planet:

Fj = G * (m1 * m_sun) / r_j^2

Fs = G * (m2 * m_sun) / r_s^2

where Fj is the gravitational force due to Jupiter, Fs is the gravitational force due to Saturn, m_sun is the mass of the Sun, r_j is the distance between Jupiter and the Sun, and r_s is the distance between Saturn and the Sun.

Using the values for the masses and distances, we get:

Fj = 1.982 x 10^23 N

Fs = 5.886 x 10^22 N

To find the total gravitational force, we simply add these two values:

F_total = Fj + Fs

F_total = 2.571 x 10^23 N

Therefore, when Jupiter and Saturn are in the same line, the total gravitational force due to them is approximately 2.571 x 10^23 N.

learn more about gravitational force: https://brainly.com/question/27943482

#SPJ1

The density of the nucleus is calculated to be 2.82 × 10¹⁴ g/cm³ if the radius of Uranium is 7.0 × 10⁻³ pm and the mass of Uranium is 235 amu.

To find the density of the nucleus in g/cm³, the following formula should be used:-

ρ = (mass of nucleus) / [(4/3) × π × (radius of nucleus)³]

We know that 1 amu = 1.66 × 10⁻²⁴ g

Therefore, we must convert the unit of mass by:-

mass of Uranium = 235 amu × 1.66 × 10⁻²⁴ g/amu = 3.91 × 10⁻²² g

Now, we must convert the unit of radius in cm by:-

radius of Uranium = 7.0 × 10⁻³ pm = 7.0 × 10⁻¹² cm

Now, the density can be calculated by using the following formula:-

Density of nucleus, ρ = (mass of nucleus) / [(4/3) × π × (radius of nucleus)³]

                                   = (3.91 × 10⁻²² g) / [(4/3) × 3.14 × (7.0 × 10⁻¹² cm)³]

                                   = 2.82 × 10¹⁴ g/cm³

Hence, the density of the Uranium nucleus is 2.82 × 10¹⁴ g/cm³.

Learn more about density at https://brainly.com/question/406690

#SPJ11

The electric field is zero at the center of the sphere, which is the same distance from the plane as the radius of the sphere.

Electric fields due to a uniformly charged sphere radiate outward from a source, and their strength decreases with increasing distance from the source. At the center of the sphere, the electric field is zero since the field lines from the opposite poles cancel each other out. This point is the same distance from the plane as the radius of the sphere.

At the surface of the sphere, the electric field is given by the expression E = kq/r^2, where k is Coulomb's constant, q is the charge on the sphere, and r is the radius of the sphere.

As we move inside the sphere, the charge enclosed by the Gaussian surface decreases, which in turn decreases the electric field. At the center of the sphere, all the charge is enclosed by the Gaussian surface, and the electric field due to the entire sphere cancels out, resulting in zero electric field.

Therefore, the electric field is zero at the same distance from the plane as the radius of the sphere.

To know more about electric field click here:

https://brainly.com/question/15800304

#SPJ11

The speed of the proton can be calculated as:v = p/m = (1.08 × 10⁻¹⁸ kg m/s)/(1.67 × 10⁻²⁷ kg) = 6.46 × 10⁸ m/s. So, the speed of the proton at 10 MeV is 6.46 × 10⁸ m/s.

Relationship between energy in joules versus eV. The relationship between energy in joules and electron volts (eV) is defined by the conversion factor 1 eV = 1.6 × 10⁻¹⁹ joules. This factor is used to convert energy measurements from one unit to the other. If a proton has an energy of 10 MeV, we can use this conversion factor to determine its energy in joules.10 MeV = 10 × 10⁶ eV = 1.6 × 10⁻¹⁹ J/eV × 10 × 10⁶ eV = 1.6 × 10⁻¹³ J. Speed of a proton at 10 MeV.

The speed of a proton at 10 MeV can be calculated using the relativistic equation: E² = (mc²)² + (pc)², where E is the energy of the proton, m is its mass, c is the speed of light, and p is the momentum of the proton. Let's assume that the mass of the proton is 1.67 × 10⁻²⁷ kg. Then, the momentum of the proton can be calculated as follows:p = √(E² - (mc²)²)/c = √((10 × 10⁶ eV)² - (1.67 × 10⁻²⁷ kg × (2.998 × 10⁸ m/s)²)²)/2.998 × 10⁸ m/s = 1.08 × 10⁻¹⁸ kg m/s. The speed of the proton can be calculated as:v = p/m = (1.08 × 10⁻¹⁸ kg m/s)/(1.67 × 10⁻²⁷ kg) = 6.46 × 10⁸ m/s. Therefore, the answer is 10 MeV is 6.46 × 10⁸ m/s.

Learn more about proton : https://brainly.com/question/1805828

#SPJ11

When two waves, in phase and with the same wavelength, interact, the result is a wave with an amplitude that is the sum of the amplitudes of the initial two waves.

Thus, the correct answer is a wave with an amplitude that is the sum of the amplitudes of the initial two waves (D).

А wаve is а disturbаnce thаt trаvels through а medium, trаnsferring energy from one point to аnother without trаnsferring the mаteriаl medium itself. Wаves cаn be of vаrious types, such аs sound wаves, electromаgnetic wаves, аnd more.

When two wаves interаct, there аre three possible results: reinforcement, interference, аnd а combinаtion of the two. When two wаves interfere with one аnother, their displаcements аdd up to form а resultаnt wаve. The crest of one wаve is in line with the crest of the other wаve, resulting in constructive interference, which results in а wаve with аn аmplitude thаt is the sum of the аmplitudes of the initiаl two wаves.

For more information about wаve refers to the link: https://brainly.com/question/25954805

#SPJ11

The electron in question has an unnormalized wave function given by , where 2, and 1 3 . When measuring the momentum of this electron, the probability of finding is 0.143.

To calculate this probability, we need to take the square of the modulus of the wave function, which gives us | | = . The probability of finding this momentum value is therefore 0.143. The average momentum of this electron can be calculated by taking the inner product of the wave function with the momentum operator , giving us  . This inner product gives us an expectation value for the momentum of this electron, which is the average momentum. In conclusion, if we measure the momentum of the electron with the given unnormalized wave function , we have a probability of 0.143 of finding the momentum value and an average momentum of this electron.

For more questions on wave function

https://brainly.com/question/13323945

#SPJ11

The shift of the Moon's orbit is called precession and it occurs over a period of 18.6 years.

During precession, the tilt of the Moon's orbit changes by up to 5° from its current inclination to the Earth's orbit. This change in the Moon's orbit causes the dates and times of eclipses to shift each year. Solar eclipses occur when the Moon's shadow crosses the Earth, and this requires the Moon to be in a specific position in relation to the Earth. Precession of the Moon's orbit shifts that position, which shifts when and where on the Earth's surface eclipses occur.

Precession also affects the visibility of lunar eclipses. During a lunar eclipse, the Earth's shadow covers the Moon, which means the Moon must be in the Earth's shadow in the first place. As the Moon's orbital inclination changes over time, it affects which parts of the Earth's shadow the Moon will pass through and be visible from, meaning that not all lunar eclipses are visible from the same places.

Precession is an important factor in predicting when and where solar and lunar eclipses will occur. As the Moon's orbital inclination changes, it affects where on Earth an eclipse will be visible from and when it will occur. It's important for astronomers to consider precession when making predictions about eclipses.

For more such questions on Precession.

https://brainly.com/question/30352256#

#SPJ11

Coulomb's Law and Newton's Law of Gravitation are similar because they both are inverse-square laws. The laws are different because Coulomb's law relates to electric charges while Newton's law of gravitation relates to mass.

Coulomb's law is the law of electrostatic interaction between charged particles, which states that the force between two charged particles is directly proportional to the product of the charges and inversely proportional to the square of the distance between them. The electric force is proportional to the product of the charges, and it is attractive if the charges are opposite and repulsive if the charges are the same.

Newton's Law of Gravitation is the force of attraction between two masses. It is an inverse-square law that states that the force between two masses is directly proportional to the product of the masses and inversely proportional to the square of the distance between them. This law also states that gravity acts on all objects, not just those with mass, and is always attractive.

To know more about Coulomb's law:

https://brainly.com/question/506926

#SPJ11

Answer:

Height of the cliff would be approximately [tex]150\; {\rm m}[/tex].

The landing site would be approximately [tex]143\; {\rm m}[/tex] from the bottom of the cliff.

(Assume that [tex]g = 9.81\; {\rm m\cdot s^{-2}}[/tex], air resistance is negligible, the top of the cliff is level, and that the cliff is vertical.)

Explanation:

Assume that air resistance is negligible. The vertical acceleration of the vehicle would be constantly [tex]a_{y} = (-g) = (-9.81)\; {\rm m\cdot s^{-2}}[/tex] during the fall.

If the top of the cliff is level, initial vertical velocity [tex]u_{y}[/tex] would be [tex]0\; {\rm m\cdot s^{-1}}[/tex].

Apply the SUVAT equation to find the vertical displacement [tex]x_{y}[/tex] of the vehicle in that [tex]t = 5.5\; {\rm s}[/tex].

[tex]\begin{aligned}x_{y} &= \frac{1}{2}\, a_{y}\, t^{2} + u_{y}\, t \\ &= \frac{1}{2}\, (-9.81)(5.5)^{2} \; {\rm m} + (0)\, (5.5)\; {\rm m} \\ &\approx (-150)\; {\rm m}\end{aligned}[/tex].

In other words, the vehicle landed approximately [tex]150\; {\rm m}[/tex] below where it took off. The height of the cliff would be [tex]150\; {\rm m}\![/tex].

Also under the assumption that air resistance is negligible, the horizontal velocity of the vehicle would be constant: [tex]v_{x} = 26\; {\rm m\cdot s^{-1}}[/tex].

Since horizontal velocity is constant, multiply this velocity by by time to find the horizontal displacement [tex]x_{x}[/tex]:

[tex]\begin{aligned}x_{x} &= v_{x}\, t \\ &= (26)\, (5.5)\; {\rm m} \\ &= 143\; {\rm m} \end{aligned}[/tex].

Answer:

v = sqrt(T/p) Here I

Explanation:

piano wire of a linear mask Party unit length that is 0.005 Kg. for Amanda, the tension in the wire is 1350 Newton. In the first part, we are calculating the speed of the wave. So wave speed is the square root of detention divided by mass per unit length. So the tension is 1350 Newton. This is 0.55. So the spirit of the wave is 5 1 9.6 m/s. This is the video of the need In the B part. The length of the string is one m. Now we are calculating the fundamental frequency. So fundamental frequency is one divided by two times under rooty divided by meal, so one divided by two lengths is one m. This is 135001 double 05. So the fundamental frequency is equal to. If you divide this then you will get 259.8 Hz. This is the fundamental frequency of the wire

The speed of the satellite orbiting the new planet is less than the speed of the satellite orbiting Earth.

(a) The speed of the satellite orbiting the new planet is less than the speed of the satellite orbiting Earth. This is because the speed of the satellite is determined by the gravitational force between the satellite and the planet it is orbiting.

Since the new planet is significantly more massive than Earth, the gravitational force acting on the satellite is much greater. This means that the satellite needs to travel at a slower speed in order to maintain a circular orbit at the same distance d from the surface of the planet.

Therefore, the speed of the satellite orbiting the new planet is less than the speed of the satellite orbiting Earth.

To know more about gravitational force click here:

https://brainly.com/question/12528243

#SPJ11

The advantages and disadvantages of piezoresistors and capacitors as signal transducers are that Piezoresistors are that it has high sensitivity and accuracy but limited dynamic range and temperature dependence, while capacitors have good frequency response but lower sensitivity and require complex signal conditioning.

(a) Piezoresistors:

Advantages:

Disadvantages:

(b) Capacitors:

Advantages:

Disadvantages:

Learn more about signal transducers at

https://brainly.com/question/29999222

#SPJ4

Based on our understanding of our own solar system, the most surprising observation in an extra-solar system of planets would be the presence of a large number of gas giants orbiting very close to their star.

To learn more about extra-solar system  https://brainly.com/question/14018668

#SPJ11

All living things need energy to carry out their life processes, such as metabolism, movement, and growth. They obtain this energy from natural resources such as sunlight, food, and water. Additionally, living things require other natural resources such as oxygen, carbon dioxide, nitrogen, and minerals for various functions such as respiration, photosynthesis, and cellular processes.

Earth's natural resources include air, water, soil, minerals, fuels, plants, and animals. Conservation is the practice of caring for these resources so all living things can benefit from them now and in the future. All the things we need to survive, such as food, water, air, and shelter, come from natural resources.

Living things need need air, water, food and shelter to survive. There is a difference between needs and wants. Students will be able to identify the four things that organisms need to survive. Students will realize through exploring the Nature Gardens that organisms' needs for survival are fewer than wants.

To know more about movement visit:-

https://brainly.com/question/11905668

#SPJ9

When lighted, a 100-watt light bulb operating on a 110-volt household circuit has a resistance closest to 0.99 ohms.

Resistance refers to the electrical property of a circuit component, such as a light bulb, that resists the flow of electrical current through it.

Ohm's law is a fundamental principle in electrical engineering that relates the resistance, voltage, and wattage in a circuit. It states that the resistance (R) is equal to the voltage (V) divided by the wattage (W).

W = 100 watts, V = 110 volts.

Use Ohm’s law to calculate the resistance (R):

R = V/W = 110/100 = 0.99 ohms.

Therefore, when a 100-watt light bulb is operating on a 110-volt household circuit, its resistance is approximately 0.99 ohms.

To know more about resistance click here:

https://brainly.com/question/11431009

#SPJ11

The weight of the second block is 29.17 N.

The weight of the second block can be determined by setting the torque due to the weight of the first block equal to the torque due to the weight of the second block, when the meterstick is in rotational equilibrium.

The torque due to the weight of the first block is given by:

τ1 = F1 * d1

where F1 is the weight of the first block (25 N) and d1 is the distance between the center of the meterstick and the 70 cm mark (d1 = 0.7 m/2 = 0.35 m, since the meterstick is supported at the center).

The torque due to the weight of the second block is given by:

τ2 = F2 * d2

where F2 is the weight of the second block (unknown) and d2 is the distance between the center of the meterstick and the 20 cm mark (d2 = 0.2 m - 0.5 m = -0.3 m, since the 20 cm mark is to the left of the center).

Since the meterstick is in rotational equilibrium, the torques due to the weights of the two blocks are equal:

τ1 = τ2

F1 * d1 = F2 * d2

Substituting the given values, we get:

25 N * 0.35 m = F2 * (-0.3 m)

F2 = (25 N * 0.35 m) / (-0.3 m)

F2 = 29.17 N (to two significant figures)

Therefore, the weight is 29.17 N.

Learn more about the torque: https://brainly.com/question/25708791

#SPJ11

Elastic energy is a type of potential energy. It is the energy stored in an elastic material when it is stretched or compressed.

Potential energy is a type of energy that is stored within an object due to its position or configuration. It is the energy that an object possesses by virtue of its position, shape, or state, and has the potential to do work.

Potential energy can be converted into kinetic energy, which is the energy of motion, when the object is allowed to move or fall. The total energy of a system, including both potential and kinetic energy, is conserved, meaning it remains constant unless acted upon by external forces.

Elastic energy is a type of potential energy. It is the energy stored in an elastic material when it is stretched or compressed. When an elastic material such as a spring is stretched or compressed, work is done on it, and this work is stored in the form of elastic potential energy. This potential energy can be released when the material returns to its original shape, causing it to vibrate or move.

Therefore, elastic potential energy is a type of potential energy that can be converted into kinetic energy as the material moves back to its original shape.

Learn more about potential energy below.

https://brainly.com/question/14427111

#SPJ1

When a boat moves through water, it experiences two forces: the forward push provided by the motor on the propeller and the resistive force created by the water around the bow. The acceleration of the 1193 kg boat is 0.404 m/s².

The net force acting on the boat can be calculated by subtracting the resistive force from the forward force:

F_net = F_forward - F_resistiveF_net = 2103 N - 1586 NF_net = 517 N

The acceleration of the boat can be calculated using the formula: a = F_net/m Where F_net is the net force acting on the boat, and m is the mass of the boat. Substituting the values we know, a = 517 N / 1193 kg a = 0.404 m/s²Therefore, the acceleration of the 1193 kg boat is 0.404 m/s².

To know more about acceleration, refer here:

https://brainly.com/question/28587095#

#SPJ11

Answer:

the energy of the photon is 4.9695 x 10^-19 joules.
Step by step explanation:

The energy of a photon can be calculated using the formula:

E = h * c / λ

where E is the energy of the photon in joules, h is Planck's constant (6.626 x 10^-34 J*s), c is the speed of light (3 x 10^8 m/s), and λ is the wavelength of the photon in meters.

First, we need to convert the wavelength from nanometers to meters:400 nm = 400 x 10^-9 m

Now we can plug in the values into the formula:

E = (6.626 x 10^-34 J*s) * (3 x 10^8 m/s) / (400 x 10^-9 m)

E = 4.9695 x 10^-19 J

Therefore, the energy of the photon is 4.9695 x 10^-19 joules.

If you drop a stone down a well that is 9.5 m deep, it will take approximately 0.028 seconds for you to hear the splash. This is because the speed of sound in air is 343 m/s, and air resistance is negligible.

The question is about finding the time it will take for the sound of the splash to reach the surface of the well. Given data:

Depth of the well = 9.5 m

Speed of sound in air = 343 m/s

We have to find the time it will take for the sound of the splash to reach the surface of the well.

Let's assume that "t" is the time that the sound of the splash takes to reach the surface of the well.

Using the formula:

t  = Distance/Speed

Using the above formula, let's find the time it will take for the sound of the splash to reach the surface of the well.

Distance = Depth of the well = 9.5 m

Speed = Speed of sound in air = 343 m/s

So, the time is:

t = Distance/Speed

t = 9.5/343

t = 0.0277 s ≈ 0.028 s

Therefore, the time it will take for the sound of the splash to reach the surface of the well is 0.028 s

Learn more about time of falling water splash at https://brainly.com/question/21323527

#SPJ11