Answer:
A
Explanation:
The particles of sediment that are most likely to be transported as suspended load are small, low-density particles. These particles have a small enough size and low enough density to be easily carried along by the flow of water or air without settling out too quickly.
Pebbles of average density (Option B) are too large and heavy to be transported as suspended load. Instead, they are typically transported as bed load or rolled along the bottom of a river or stream.
Sand and gravel of relatively high density (Option C) can be transported as suspended load in very fast-moving water, such as during floods or other high-energy events. However, they are more likely to be transported as bed load.
Dissolved ions in solution (Option D) are not considered sediment and are transported as part of the water itself, not as suspended load.
Therefore, the correct answer is Option A: small, low density particles.
what sort of history do we have here? below the unconformity we observed rocks that were strongly deformed, metamorphosed, and partially molten; these things all occur deep within the crust. above the unconformity, we see typical sedimentary rocks that reflect a changing landscape at the surface. using what we've observed and what you know about different rocks, create a logical sequence of events for the great unconformity.
We can find typical sedimentary rocks above the unconformity, which are indicative of the area's history as shifting topography.
The deviation Strongly deformed, metamorphosed, and partly molten rocks were among the phenomena we saw; these occurrences all take place deep inside the crust. Create a plausible timeline of what happened to cause the huge unconformity based on what we have seen so far and your knowledge of the various rocks.
In contrast to metamorphic and igneous rocks, which are generated deep beneath the Earth, sedimentary rocks are formed on or around the surface of the planet. Erosion, weathering, dissolution, precipitation, and lithification are the main geological processes that result in the formation of sedimentary rocks.
Learn more about sedimentary rocks Visit: brainly.com/question/30765754
#SPJ4
Correct Question:
Passage: Below the unconformity we observed rocks that were strongly deformed, metamorphosed, and partially molten; these things all occur deep within the crust. above the unconformity, we see typical sedimentary rocks that reflect a changing landscape at the surface. using what we've observed and what you know about different rocks, create a logical sequence of events for the great unconformity.
what sort of history do we have here?
Explain why land reform can lead to an increase in farm production.
Land reforms are frequently justified on the grounds of advancing fairness, lowering poverty, ensuring the nutrition of households with limited access to land, redressing social injustices, and preventing social unrest.
According to the many roles that land has played throughout history—as a component of production, a repository of wealth and value, a status symbol, or a source of social and political influence—the notion of land reform has changed throughout time.
If properly implemented, the need for land reform from the perspective of social justice and for a more fair allocation of fertile farmland provides a significant opportunity for growth. A key strategy for accelerating agricultural expansion is increased private sector involvement in land redistribution, supported by state-sponsored enabling laws, incentives, and monitoring procedures. By 2030, it is probable that the actual agricultural gross value added will have significantly increased thanks to a series of initiatives in five key sectors of the agricultural industry.
Learn more about Agriculture here:
https://brainly.com/question/14533586
#SPJ4
A sudden movement along the boundary of a tectonic plate is an (blank)?
A sudden movement along the boundary of a tectonic plate is an earthquake.
When there is a sudden movement or shift at the boundary between two tectonic plates, it releases energy in the form of seismic waves, which we feel as an earthquake.
Earthquakes can cause a wide range of destructive effects, including ground shaking, landslides, and tsunamis. The severity of the effects depends on a variety of factors, such as the magnitude of the earthquake, the distance from the epicenter, and the geological features of the area. In areas with poorly constructed buildings and infrastructure, earthquakes can cause significant damage and loss of life. Scientists study earthquakes to better understand the behavior of tectonic plates and to develop strategies for predicting and mitigating their effects. In regions prone to earthquakes, preparedness measures such as earthquake-resistant building design and early warning systems can help minimize the damage and loss of life.
know more about earthquakes:
https://brainly.com/question/248561
#SPJ11
Which of these is the best indication of the relative age of a rock of age
The best indication of the relative age of a rock is its position in relation to other rocks. This is because the law of superposition states that in an undisturbed sequence of sedimentary rocks, the oldest layer is at the bottom and the youngest is at the top.
So, by examining the layers of sedimentary rocks, we can determine their relative ages. Another important factor is cross-cutting relationships. This means that if a rock layer is cut by a fault or intrusion, then the fault or intrusion must be younger than the rock layer.
Finally, the principle of faunal succession can also be used to determine relative ages. This principle states that fossils found in a rock layer can be used to correlate the rock layer with other rock layers containing the same fossils, which provides information on their relative ages.
To know more about sedimentary rocks visit:
https://brainly.com/question/10709497
#SPJ11
This geophysical data is used to assess the ______ in a basin. This information is then used groundwater in the basin
The geophysical data is used to assess the groundwater resources in a basin. This information is then used to manage and monitor groundwater in the basin.
Geophysical data plays a vital role in both assessing and managing groundwater resources in a basin. Using techniques such as electrical resistivity, seismic, and magnetic surveys, geophysicists can identify and characterize aquifers and their properties. Once the groundwater resources are assessed, it is crucial to implement sustainable management practices to prevent over-pumping and contamination. This includes setting up monitoring systems to measure groundwater levels, quality, and flow rates, and implementing measures to protect the resource. By effectively managing groundwater resources, we can ensure their long-term availability for human consumption, agriculture, and industry.
Know more about groundwater resources:
https://brainly.com/question/10557415
#SPJ11
This geophysical data is used to assess the subsurface structure and properties in a basin.
By analyzing various geophysical measurements, such as electrical resistivity, seismic reflection, and gravity anomalies, geoscientists can create a detailed picture of the subsurface geology, including the distribution of rocks, sediments, and fluids.
This information is then used to better understand the hydrogeology of the basin, particularly the distribution and movement of groundwater. For example, if the geophysical data indicates the presence of a thick layer of impermeable rock, it may suggest that groundwater is not able to flow freely through that layer. Conversely, if the data shows a highly conductive zone, it may suggest the presence of a large aquifer that could provide a sustainable water supply.
Overall, geophysical data plays a critical role in helping to manage and protect groundwater resources, which are essential for many human and ecological needs.
Learn more about groundwater resources here:
brainly.com/question/10557415
#SPJ11
What will happen if the yellowstone volcano erupts?.
Answer:
If another large, caldera-forming eruption were to occur at Yellowstone, its effects would be worldwide. Such a giant eruption would have regional effects such as falling ash and short-term (years to decades) changes to global climate.
Hope this helps :)
Pls brainliest...
The costumes of the people in the procession are the result of synthesis between religion and ethnicity that.
The costumes of the people in the procession reflect the cultural blending of religion and ethnicity.
The clothes that the participants in the procession are wearing are a mix of their nationality and faith, expressing their distinct identities. This synthesis results in an amalgamation of cultural values, beliefs, and traditions that are incorporated into the procession's uniformity. The costumes may consist of ethnic apparel like kilts, vests or shawls as well as customary religious attire like headdresses, sashes or vibrant robes.
When these two factors are combined, a special appearance is produced that is unmistakably indicative of the participants' respective ethnic and religious backgrounds. As it demonstrates a unity of values, beliefs, and traditions that allows for a stronger sense of identification with their culture and religion, this synthesis also serves to bring the various components of the community together.
To learn more about cultural blending link is here:
brainly.com/question/12718739
#SPJ4
One reason why superimposed drainage does not change it's course
A river or stream cutting through existing rock strata to create a new route for the water to travel is referred to as superimposed drainage. When the land's surface is raised or when the river's base level falls, this process can take place.
Unless there is a considerable change in the topography, a river or stream is unlikely to change its course once it has made a new passage through the rock strata. This is due to the fact that the structure and makeup of the rock strata, as well as the slope of the ground, both affect the river's course. Even while the river could wash away the rocks over time, it is unlikely that it will alter its path until the slope or make-up of the terrain significantly changes.
For instance, if the ground falls or is elevated, the land's slope may vary, changing the river's flow. The river, even if it is overlaid on top of preexisting rock strata, is likely to continue running along its established course if the ground is stable.
Learn more about Drainage here:
https://brainly.com/question/14961647
#SPJ4
What forces have helped shape plant life in Africa South of the Sahara?
(Long answers would be great,I have a section of an essay due on this question)
There are many forces that have helped shape plant life in Africa south of the Sahara, including climate, geology, fire, and human activities.
Climate: The climate of Africa south of the Sahara is characterized by a tropical and subtropical climate, with distinct wet and dry seasons. This climate has led to the evolution of many different types of plants, including drought-resistant grasses, succulent plants, and deciduous trees.
Geology: The geology of the region has also influenced plant life. The high levels of volcanic activity have produced nutrient-rich soils that support a diverse range of plant life.
Fire: Fire is a natural part of the African savanna ecosystem, and many plants have adapted to survive regular fires. For example, some trees have thick bark that protects them from fire, while others have developed the ability to resprout from their roots after a fire.
Human activities: Human activities, such as agriculture and deforestation, have also had a significant impact on plant life in the region. Many native plant species have been replaced by crops and non-native species, and large areas of forest have been cleared for agriculture and settlement.
Overall, these and other factors have contributed to the rich and diverse plant life found in Africa south of the Sahara
Answer:
Saharan vegetation is generally sparse, with scatt3d concentrations of grasses, shrubs, and tress in the highlands, in oasis depressions, some heat and drought-tolerant grasses, herbs, small shrubs, and trees and found on the less well watered plains and plateaus of the Sahara.
the critical new developments in telescopes. Write a 200 word paper on the new developments.
The field of telescopes has been advancing rapidly in recent years, with numerous new developments and technologies changing the way we view and understand the universe.
What is the explanation for the above response?One of the most significant new developments in telescopes is the increasing use of adaptive optics, which allow for the correction of distortions caused by Earth's atmosphere. This technology is being used to build increasingly larger ground-based telescopes, which can produce images comparable to those captured by space-based telescopes.
Another major development is the increasing use of interferometry, which involves combining data from multiple telescopes to produce high-resolution images. This technique is allowing researchers to study objects in unprecedented detail, including black holes and other phenomena that were previously difficult to observe.
In addition, new telescopes are being designed and constructed with advanced optics and detectors, allowing them to capture data across multiple wavelengths, including infrared and X-ray. These telescopes are revolutionizing our understanding of the universe, revealing new insights into the nature of dark matter, the origins of galaxies, and the evolution of the universe itself.
Overall, the new developments in telescopes are allowing us to explore and understand the universe in ways that were previously unimaginable, paving the way for groundbreaking discoveries and advancements in our knowledge of the cosmos.
Learn more about telescopes at:
https://brainly.com/question/556195
#SPJ1
Which statements describe the richter scale? select three options. it gauges fault movement during an earthquake. it measures large earthquakes far from the seismograph. it estimates the total energy released from an earthquake. it increases in magnitude as amount of damage increases. it determines an earthquake’s magnitude based on the size of its seismic waves.
It estimates the total energy released from an earthquake, It determines an earthquake’s magnitude based on the size of its seismic waves and It gauges fault movement during an earthquake are the three correct statements that describe the Richter scale.
A numerical scale called the Richter scale is used to quantify the size or power of earthquakes. Charles Richter and Beno Gutenberg created it in 1935 at the California Institute of Technology. Each whole number increase on the scale, which goes from 0 to 10 corresponds to a tenfold increase in the amplitude of the seismic waves detected by a seismograph.
The scale measures seismic waves, not earthquake-related damage. It is significant to remember that the Richter scale only assesses an earthquake's magnitude not the extent of its damage. Depending on the location, depth and other factors an earthquake of the same magnitude can cause very different amounts of damage.
Learn more about Richter scale at:
brainly.com/question/31248919
#SPJ4
The Richter scale is a measurement scale used to determine the magnitude of an earthquake. It estimates the total energy released from an earthquake, which is known as the seismic moment. The scale increases in magnitude as the amount of energy released by the earthquake increases.
One statement that describes the Richter scale is that it estimates the total energy released from an earthquake. This means that it provides a measurement of the overall power of the earthquake based on the amount of energy it released.
Another statement is that it determines an earthquake's magnitude based on the size of its seismic waves. Seismic waves are the waves of energy that radiate from the earthquake's epicenter. By measuring the amplitude (height) of these waves, the Richter scale can calculate the earthquake's magnitude.
A third statement is that it measures large earthquakes far from the seismograph. Seismographs are instruments used to measure and record seismic waves. The Richter scale is designed to measure large earthquakes that can be detected by seismographs located far away from the epicenter.
To summarize, the Richter scale estimates the total energy released from an earthquake, determines an earthquake's magnitude based on the size of its seismic waves, and measures large earthquakes far from the seismograph. It is a useful tool for understanding and categorizing the power of earthquakes.
You hear about a magnitude 8. 0 earthquake on the news. Someone says "That doesn't sound too bad. An 8. 0 is just one more than the 7. 0 we had here last year. " Explain why that's not the right way
to think about the moment magnitude scale
You hear about a magnitude 8.0 earthquake on the news, and someone says it doesn't sound too bad since it's just one more than the 7.0 earthquake from last year. However, this is not the right way to think about the moment magnitude scale.
The moment magnitude scale is a logarithmic scale, meaning that each whole number increase represents a tenfold increase in the amplitude of ground motion and approximately 31.6 times more energy release. So, a magnitude 8.0 earthquake is not just one point more than a magnitude 7.0 earthquake, but rather ten times stronger in terms of ground motion and about 31.6 times more powerful in terms of energy release.
In conclusion, it is important to understand that the moment magnitude scale is logarithmic, and an increase in magnitude represents a significant increase in the earthquake's intensity and energy release. Therefore, an 8.0 magnitude earthquake is significantly more powerful than a 7.0 magnitude earthquake.
Know more about earthquakes:
https://brainly.com/question/248561
#SPJ11
mention two ways of maintaining carbon cycle
Two ways to maintain the carbon cycle are:
Reducing carbon emissions: One of the main causes of disruption in the carbon cycle is the excessive amount of carbon emissions that are released into the atmosphere. By reducing carbon emissions through the use of cleaner and more sustainable energy sources, such as wind, solar, and hydro power, we can help maintain the balance of carbon in the atmosphere.
Promoting reforestation: Trees play a crucial role in the carbon cycle, as they absorb carbon dioxide through photosynthesis. Promoting reforestation and afforestation efforts, such as planting new trees and protecting existing forests, can help increase the amount of carbon that is absorbed by vegetation and prevent it from accumulating in the atmosphere.
Precautions to take during the midst of a tropical cyclone
Precautions to take during the midst of a tropical cyclone are to stop driving, disconnect the electrical appliances, and stay indoors.
A spiral formation of thunderstorms resulting in torrential rain and squalls, a low-pressure centre, and strong winds are the characteristics of a tropical cyclone, a fast revolving storm system.
Avoid driving since the roads will be slick and it will be difficult to maintain control of the car in the wind. To prevent short circuits and damage, you should turn off the gas and unplug the electrical appliances. Shut your windows and doors with shutters while remaining inside the house.
To learn more about tropical cyclone here
brainly.com/question/26832152
#SPJ4
Joe is using the function E = 1. 89x + 2. 89y to minimize his expenses when selling markers and erasers. He has the following
constraints.
The maximum value of E is $13.34. So the option D is correct.
The function is E = 1.89x + 2.89y.
The following constraints are:
2x + y ≥ 10
x + 2y ≥ 8
x ≥ 0
y ≥ 0
The equations are
2x + y = 10 ...............(1)
x + 2y = 8 ...............(2)
Simplify the equation 1 and 2 to find the value of x and y.
Eliminate the y from the equation 1.
2x + y = 10
Subtract 2x on both side we get
y = 10 - 2x
Substitute the value of y in equation 2
x + 2(10 - 2x) = 8
Simplify
x + 20 - 4x = 8
20 - 3x = 8
Subtract 8 on both side, we get
12 - 3x = 0
Add 3x on both side, we get
3x = 12
Divide by 3 on both side, we get
x = 4
Substitute the value of x in y value.
y = 10 - 2(4)
y = 10 - 8
y = 2
Substitute the value of x and y in the function to find the maximum value of E.
E = 1.89x + 2.89y
E = 1.89(4) + 2.89(2)
E = 7.56 + 5.78
E = 13.34
So the option D is correct.
To learn more about inequality link is here
brainly.com/question/30228778
#SPJ4
The complete question is:
Joe is using the function E = 1.89x + 2.89y to minimize his expenses when selling markers and erasers. He has the following constraints.
2x + y ≥ 10
x + 2y ≥ 8
x ≥ 0
y ≥ 0
What is the maximum value of E.
A. $15.12
B. $9.45
C. $28.90
D. $13.34
If the diameter of Earth is approximately 8000 miles, approximate the distance between A and B if angle ACB has the indicated measure. (Round your answers to the nearest mile.) A) 49 degrees B) 4 degrees
When angle ACB is 49 degrees, the approximate distance between A and B is 3420 miles. when angle ACB is 4 degrees, the approximate distance between A and B is 280 miles.
A) For angle ACB = 49 degrees:
Step 1: Convert the diameter of Earth (8000 miles) to its radius, since we'll be working with a circular geometry. The radius of Earth is half the diameter, so it's 4000 miles.
Step 2: Use the formula for finding the arc length (distance between A and B) on a circle, which is:
Arc length = Radius x Angle (in radians)
Step 3: Convert angle ACB from degrees to radians:
Radians = Degrees x (π/180)
Radians = 49 * (π/180) ≈ 0.855 radians
Step 4: Calculate the arc length (distance between A and B):
Arc length = 4000 miles x 0.855 radians ≈ 3420 miles
So, when angle ACB is 49 degrees, the approximate distance between A and B is 3420 miles.
B) For angle ACB = 4 degrees:
Step 1: We already know the radius of Earth is 4000 miles.
Step 2: Convert angle ACB from degrees to radians:
Radians = 4 x (π/180) ≈ 0.070 radians
Step 3: Calculate the arc length (distance between A and B):
Arc length = 4000 miles x 0.070 radians ≈ 280 miles
So, when the angle ACB is 4 degrees, the approximate distance between A and B is 280 miles.
Learn more about distance here:-
https://brainly.com/question/15172156
#SPJ11
Industrial technology development has made almost everything possible. However, there are still limitations in changing the natural features to human features. What do you think are the reasons?
Overall, while industrial technology has enabled humans to achieve many things, there are still limitations in transforming natural features into human features due to the complexity of these features, the environmental impacts of such transformations, ethical concerns, and technological limitations.
While industrial technology has made significant advancements, there are still limitations in changing natural features to human features due to several reasons:
Complexity of Natural Features: Natural features, such as mountains, rivers, and forests, are complex and have evolved over millions of years through natural processes. These features are influenced by a range of factors, including geology, climate, and ecology, and cannot be easily replicated or transformed into human features.
Environmental Impact: Transforming natural features into human features often has significant environmental impacts, such as habitat loss, soil erosion, and water pollution. Such impacts can have long-term consequences for the health and sustainability of ecosystems and the species that depend on them.
To know more about industrial technology here
https://brainly.com/question/22785524
#SPJ4
The amount of uniformity in the size of rock or sediment particles is called
The amount of uniformity in the size of rock or sediment particles is known as the sorting.
Sorting is an important characteristic of sedimentary rocks as it helps geologists understand the depositional environment and the processes that took place during the formation of the rock. Sedimentary rocks that have well-sorted particles indicate that they were deposited in an environment with steady currents, where the particles were transported and deposited uniformly based on their size.
On the other hand, sedimentary rocks with poorly sorted particles indicate that they were deposited in an environment with varying currents, where particles of different sizes were deposited in the same location. Sorting can also be used to determine the energy level of the environment where the sediment was deposited. High energy environments, such as fast-flowing rivers or strong ocean currents, will cause the particles to become more poorly sorted, while low energy environments such as lakes or quiet ocean bays will result in better sorted particles.
Therefore, the degree of sorting can provide important clues about the past environments in which the sedimentary rock was formed.
Learn more about sedimentary rocks here:
https://brainly.com/question/10709497
#SPJ11
Have you hit the jackpot yet for your goal lol... nope you haven't.
answer this question and earn 100pts.
what time is it where you live?
It is currently 8:15 PM where I live. I live in the Eastern Standard Time zone, which is five hours behind Greenwich Mean Time.
We observe Daylight Saving Time in the summer, so the time changes to four hours behind GMT during that time. Daylight Saving Time begins in the spring, usually in March, and ends in November.
During this time, the clocks are turned forward an hour to make the most of the longer days. Clocks go back an hour in the fall when Daylight Saving Time ends. I always make sure to adjust my clocks accordingly when Daylight Saving Time begins and ends.
To know more about Greenwich Mean Time., click here:
https://brainly.com/question/30843420
#SPJ4
Which are true of richter or local magnitude calculations?.
The amplitude of seismic waves captured by a seismograph is used to calculate the Richter magnitude. Calculations of the local magnitude determine the size of an earthquake at its epicenter.
1. The formula used to determine Richter magnitude uses the logarithm of the amplitude of seismic waves recorded on a seismograph. This calculation is used to determine an earthquake's magnitude.
2. Richter magnitude is determined using one formula, whereas local magnitude—also referred to as the "moment magnitude"—is determined using another.
The extent of the ruptured fault, the amount of ground displacement, and the quantity of energy released are all factors in this computation. This calculation is used to determine an earthquake's size at its epicenter.
To learn more about seismograph link is here
brainly.com/question/1828024
#SPJ4
What was the political system in Cuba once Fidel Castro toppled the existing government?
Answer: Several Latin American countries began to demand Cuba's re-admission to the Organization of American States. Cuba's government convened the first National Congress of the Cuban Communist Party, officially establishing Cuba as a socialist state.
The area behind an island arc that develops a spreading center and rifts is a(n) ______. multiple choice question.
The area behind an island arc that develops a spreading center and rifts is an back-arc basin.
A specific kind of geologic basin called a back-arc basin can be found at several convergent plate borders. Back-arc basins are now all underwater landforms connected to island arcs and subduction zones, with many of them being located in the western Pacific Ocean. The majority of them are the consequence of tensional pressures brought on by the oceanic trench rollback process, in which a subduction zone shifts in the direction of the subducting plate.
Back-arc basins are found in regions where the oceanic crust subducting plate is very ancient. Asymmetric seafloor spreading distinguishes back-arc basins from typical mid-ocean ridges, however this can vary greatly even within a same basin.
Therefore, option C is the correct answer.
The complete question is, "The area behind an island arc that develops a spreading center and rifts is a(n) ______.
A. Barrier Island
B. Microcontinental islands
C. Back-arc basin
D. Volcanic island arc
Learn more about Island here:
https://brainly.com/question/7964000
#SPJ4
How could the movements of the planets in the solar system be used as evidence for how the solar system formed?
The planets orbit the Sun in the same direction and have nearly circular orbits. This suggests that the solar system formed from a rotating cloud of gas and dust that began to collapse in on itself due to gravity.
Thus, the movements of the planets in the solar system can provide evidence for how the solar system formed. As the material spun faster, it flattened out and eventually formed the planets and their orbits.
The motions of the planets are also affected by the presence of the other planets in the solar system, indicating that the planets formed together rather than separately.
This also explains the reason why the planets closer to the sun are rockier and the planets far away are rather gaseous while spinning the rocky particles might be attracted more strongly. This evidence is consistent with the current understanding of the formation of the solar system.
To know more about Planets :
https://brainly.com/question/19650744
Which proccess mainly occurs in the gizzard of an earth worm?.
Grinding of food particles process mainly occurs in the gizzard of an earth worm.
An earthworm's gizzard is an organ that is situated between the oesophagus and the gut. It has strong, muscular walls and is filled with tiny sand and gravel fragments that help food grind as it goes through. Mastication, the act of breaking down food into tiny pieces so that earthworms can absorb the necessary nutrients, is crucial for earthworms.
Additionally, the gizzard aids in the digestion process by combining food particles and the earthworm's digestive juices. The gizzard's muscles contract and relax in a wave-like pattern, which aids in moving food through the digestive tract. Peristalsis is the term for this action.
To learn more about earth worm link is here:
brainly.com/question/366724
#SPJ4
Brief Discussion on
Rainfall
Helpp I need to figure it somthing
What ecosystem covers almost one-third of South America and nearly all of Central America?
jungle
rain forest
temperate
desert
Answer: Tropical Rain Forest
Explanation: Hope this helps <3
Choose the correct statement that best distinguishes between astrology and astronomy. AAstrology is the study of stars only. Astronomy is the study of planets only.BAstrology is the study of the Moon only. Astronomy is the study of stars and planets only.CAstrology is the study of influence of cosmic objects on human lives. Astronomy studies celestial objects and related phenomena.DAstrology is the study of planets only. Astronomy is the study of stars only.
Answer:
C. Astrology is the study of influence of cosmic objects on human lives. Astronomy studies celestial objects and related phenomena.
The correct statement that best distinguishes between astrology and astronomy is C: "Astrology is the study of influence of cosmic objects on human lives. Astronomy studies celestial objects and related phenomena."
Astrology and astronomy are two distinct fields of study that are often confused with each other. While astrology is based on the idea that the position and movement of celestial objects can influence human lives and events, astronomy is the scientific study of celestial objects and phenomena.
Astrology is considered a pseudoscience and has no scientific evidence to support its claims, whereas astronomy is a recognized scientific discipline that uses the scientific method to understand the universe. Astronomers use telescopes and other instruments to observe and study the properties and behavior of celestial objects such as stars, planets, and galaxies, and to make predictions about their behavior based on scientific principles.
Option C holds true.
Learn more about astrology: https://brainly.com/question/10826203
#SPJ11
Regions that receive up to 20 inches of rainfall per year are referred to as __________ because they receive more precipitation than most deserts. question 7 options: semiarid deserts coastal deserts polar deserts subtropical deserts
Answer:
Semiarid deserts.
Regions that receive up to 20 inches of rainfall per year are referred to as semiarid deserts because they receive more precipitation than most deserts.
Semiarid deserts are characterized by their dry climate, with average annual temperatures ranging from hot to cold. The vegetation in semiarid deserts is typically sparse, with shrubs and cacti being the dominant plants. These regions are found in areas where the climate is transitional between arid and humid regions, such as the Great Basin in the United States and the Kalahari Desert in Africa.
While semiarid deserts receive more rainfall than arid deserts, they are still prone to droughts and water scarcity. This can be a significant challenge for agriculture and human settlements in these regions. However, semiarid deserts also have unique ecosystems and biodiversity, with many plant and animal species adapted to the harsh conditions. Overall, semiarid deserts play an important role in the global ecosystem and are worthy of study and conservation efforts.
Learn more about Semiarid deserts here: https://brainly.com/question/23082693
#SPJ11
The Sun Unit Review Practice
6 of 6Items
Item 6
Select the correct answer from the list. (2 points)
During the low point in the sun's 11-year cycle, the
field lines up with the poles, resulting in
sunspots. At the peak of the solar cycle,
sunspots tend to form. During that phase of the solar cycle, intense bursts of radiation cause
. This often occurs with coronal mass ejections, which are
from the sun
what word fit in the blanks PLEASE HELP
Answer:
During the low point in the sun's 11-year cycle, the magnetic field lines up with the poles, resulting in fewer sunspots. At the peak of the solar cycle, sunspots tend to form. During that phase of the solar cycle, intense bursts of radiation cause solar flares. This often occurs with coronal mass ejections, which are powerful eruptions from the sun.
Sunspots form when the magnetic field aligns with the poles at the lowest point of the sun's 11-year cycle. Sunspots typically develop during the height of the solar cycle. Solar flares are produced during that period of the solar cycle by powerful radiation bursts. This frequently happens with coronal mass ejections, which are solar flares that release large amounts of energy.
What is the solar cycle?
A cycle known as the solar cycle occurs once every 11 years on average in the sun's magnetic field. Our sun is a huge ball of hot, electrically charged gas. There is a strong magnetic field produced when this charged gas flows. The magnetic field of the sun goes through a cycle known as the "solar cycle."
Why do magnetic fields exist?
The magnetic field is the region where a magnetic substance or a moving electric charge experiences the effects of magnetism. a picture of the magnetic field and how the magnetic force is distributed both inside and outside of a magnetic object.
To know more about the solar cycle:
https://brainly.com/question/16025821
#SPJ11