The compound least soluble in water would be Option C, CH3CH2CH2CH2CH2CH2NH2. When an ionic compound is added to water, it splits into cations and anions, which are surrounded by water molecules. When a solute dissolves in a solvent, the solvent's molecules surround the solute's molecules.
The solubility of compounds varies widely depending on their chemical structure. A compound with polar bonds is typically more soluble in polar solvents like water, while a compound with nonpolar bonds is typically more soluble in nonpolar solvents like oil.
Here are the options and their solubility characteristics:
Option A: CH3CH2CH2NH2. This is a primary amine. Primary amines have polar covalent bonds but are less polar than alcohols. They can hydrogen-bond with water, making them moderately soluble in water.Option B: CH3CH2CH2CH2NH2. This is a primary amine with one more carbon than Option A. It is a larger molecule and has a longer nonpolar chain. It is less polar than Option A and less likely to dissolve in water.Option C: CH3CH2CH2CH2CH2CH2NH2. This is a primary amine with six carbons. It is even larger than Option B and less polar. As a result, it is less likely to dissolve in water.Option D: CH3NH2. This is a primary amine with only one carbon. It is polar and has a strong dipole moment, allowing it to dissolve easily in water.Option E: CH3CH2NH2. This is also a primary amine. It has more polar bonds than Option B but fewer than Option A. It is moderately soluble in water.Learn more about solubility: https://brainly.com/question/21717923
#SPJ11
What happens over time as sediments settle on land or water?
a 0.160 mole quantity of nicl2 is added to a liter of 1.20 m nh3 solution. what is the concentration of ni2 ions at equilibrium? assume the formation constant of ni(nh3)2 6 is 5.5×108 .
The concentration of Ni2+ ions at equilibrium is approximately 4.4×10⁻⁹ M.
A more detailed explanation of the answer.
To find the concentration of Ni2+ ions at equilibrium, we need to use the formation constant (Kf) of Ni(NH3)6 2+ and perform an ICE table (Initial, Change, Equilibrium) calculation. The given Kf value is 5.5×10⁸.
Student question: What is the concentration of Ni2+ ions at equilibrium when 0.160 moles of NiCl2 are added to a liter of 1.20 M NH3 solution?
1. Balanced equation for the reaction:
Ni2+ + 6 NH3 <=> Ni(NH3)6 2+
2. Create the ICE table:
| | Ni2+ | NH3 | Ni(NH3)6 2+ |
|-----|------|-------|------------|
| I | 0.16 | 1.20 | 0 |
| C | -x | -6x | +x |
| E | 0.16-x | 1.20-6x | x |
3. Write the expression for Kf:
Kf = [Ni(NH3)6 2+]/([Ni2+][NH3]⁶) = 5.5×10⁸
4. Substitute the equilibrium values from the ICE table:
5.5×10^8 = (x)/((0.16-x)(1.20-6x)⁶)
5. Since Kf is very large, we can assume that x (change in concentration) is very small compared to the initial concentrations. Thus, we can approximate 0.16-x ≈ 0.16 and 1.20-6x ≈ 1.20.
6. Simplify and solve for x:
5.5×10⁸ = (x)/((0.16)(1.20)⁶)
x ≈ 4.4×10⁻⁹ M
The concentration of Ni2+ ions at equilibrium is approximately 4.4×10⁻⁹ M.
Learn more about constant (Kf).
brainly.com/question/30092497
#SPJ11
how will the volume of a gas change if the number of moles of gas is quadrupled at constant pressure and temperature?
The volume of a gas will increase if the number of moles of gas is quadrupled at constant pressure and temperature: the volume of the gas will also increase four times its original volume.
This can be explained using the Ideal Gas Law, which states that the volume of a gas is proportional to the number of moles of gas when pressure and temperature remain constant. Therefore, if the number of moles of gas is increased by a factor of four, the volume of the gas will also increase by a factor of four.
To understand this concept better, let us consider the following example. Let us assume that there is a certain amount of gas, A, which contains one mole of gas at a constant pressure and temperature. This gas will occupy a certain volume, V1.
If the number of moles of gas is quadrupled to four moles, the volume of the gas will become four times the original volume, V2. Therefore, the volume of the gas, V2, is four times the original volume, V1.
This example demonstrates that if the number of moles of gas is increased at constant pressure and temperature, the volume of the gas will also increase proportionately. Therefore, if the number of moles of gas is quadrupled at constant pressure and temperature, the volume of the gas will also increase four times its original volume.
To know more about pressure refer here:
https://brainly.com/question/28907914#
#SPJ11
According to Avogadro's Law, at constant temperature and pressure, the volume of a gas is directly proportional to the number of moles of gas. Therefore, if the number of moles of gas is quadrupled while keeping the temperature and pressure constant, the volume of the gas will also quadruple.
Mathematically, we can express this relationship as:
V ∝ n
where V is the volume of the gas, n is the number of moles of the gas, and the symbol ∝ means "is proportional to".
If we quadruple the number of moles of gas, then we have:
n' = 4n
where n' is the new number of moles of gas, and n is the original number of moles of gas.
Using the relationship between volume and number of moles, we can write:
V' ∝ n'
Substituting n' = 4n, we get:
V' ∝ 4n
Simplifying, we get:
V' = 4V
Therefore, if the number of moles of gas is quadrupled at constant pressure and temperature, the volume of the gas will also quadruple.
For more details about Avogadro's click here:
https://brainly.com/question/11907018#
#SPJ11
Make the indicated corrections in the following gas volumes.(show work)
The required gas volumes obtained at different pressures is a. [tex]279.825cm^3[/tex], b. [tex]0.804m^3[/tex], c. [tex]37.43cm^3[/tex], d. [tex]551.5cm^3[/tex] and e. [tex]200cm^3[/tex].
The ideal gas equation is a mathematical equation used to relate the four main properties of an ideal gas: pressure (P), volume (V), temperature (T), and moles of gas (n). It is expressed as PV = nRT, where R is the ideal gas constant. This equation is used to calculate the pressure, volume, and temperature of an ideal gas given any two of these properties.
a. Given [tex]338cm^3[/tex] at 86.1kPa to 104.0kPa
We can calculate this using the ideal gas law:
P1V1 = P2V2
86.1 * 338 = 104.0 * V2
V2 =[tex]279.825cm^3[/tex]
b. Given [tex]0.873m^3[/tex] at 94.3kPa to 102.3kPa
P1V1 = P2V2
(94.3) * (0.873) = (102.3) * V2
V2 = [tex]0.804m^3[/tex]
c. Given [tex]31.5cm^3[/tex] at 97.8kPa to 82.3kPa
P1V1 = P2V2
(97.8) * 31.5 = 82.3 * V2
V2 = [tex]37.43cm^3[/tex]
d. [tex]524cm^3[/tex] at 110.0kPa to 104.5kPa
P1V1 = P2V2
110.0 * 524 = 104.5 * V2
V2 = [tex]551.5cm^3[/tex]
e. [tex]171cm^3[/tex] at 122.5kPa to 104.3kPa
P1V1 = P2V2
122.5 * 171 = 104.3 * V2
V2 = [tex]200cm^3[/tex]
To learn more about volume click here https://brainly.com/question/25252629
#SPJ1
How is potassium-argon dating useful to a paleoanthropologist?
Answer:
it can be used to date the sedimentary rock where the fossils of ancient humans or their hominid ancestors are found.
Explanation:
hope it helps
determine the solubility of kcl at 60 °c in 100g of h2o?
The solubility of KCl at 60 °C in 100 g of water (H2O) can be determined using experimental data or by using a solubility table. The solubility of a substance refers to the maximum amount of that substance that can dissolve in a given amount of solvent at a particular temperature and pressure.
One possible way to determine the solubility of KCl at 60 °C in 100 g of water is to consult a solubility table, which lists the solubility of various substances in water at different temperatures. According to one such table, the solubility of KCl in water at 60 °C is approximately 47 g per 100 g of water.
This means that 100 g of water at 60 °C can dissolve up to 47 g of KCl before becoming saturated, i.e., no more KCl will dissolve in the water at this temperature.
It is important to note that the solubility of KCl (or any substance) in water can be affected by various factors, such as temperature, pressure, and the presence of other solutes. Therefore, the solubility value obtained from a solubility table is only an approximation and may not be accurate for all conditions.
For more details about solubility click here:
https://brainly.com/question/29661360#
#SPJ11
a buffer with a ph of 4.56 contains 0.23 m of sodium benzoate and 0.10 m of benzoic acid. what is the concentration of [h3o ] in the solution after the addition of 0.060 mol hcl to a final volume of 1.7 l? assume that any contribution of hcl to the volume is negligible.
which best describes the reaction, if any, that occurs when aqueous solutions of silver nitrate and sodium phosphate are combined?
Silver phosphate is created as a precipitate sodium nitrate is formed as a precipitate there is no reaction silver is oxidised silver is reduced.
Does mixing silver I nitrate and sodium chloride aqueous solutions result in a reaction?The ions of both compounds interchange when silver nitrate (AgNO3) and sodium chloride (NaCl) solution are combined. As a result, white precipitates of silver chloride (AgCl) and sodium nitrate solution (NaNO3) are produced.
What precipitate will result from the reaction between aqueous sodium phosphate and aqueous silver nitrate?Silver phosphate and sodium nitrate are produced as a result of the interaction between silver nitrate and sodium phosphate. Due to its insoluble in water nature, silver phosphate precipitates out of the solution.
To know more about Silver phosphate visit:-
brainly.com/question/13135757
#SPJ1
Under which set of conditions would H₂ (g) be the most dissolved in H₂O(l)?
101.3 kPa and 75°C
120 kPa and 25°C
101.3 kPa and 25°C
120 kPa and 75°C
The most dissolved H₂ (g) in H₂O (l) would occur under 101.3 kPa and 75°C.
The attraction between an electronegative atom serving as the hydrogen bond acceptor and a hydrogen atom covalently bonded to a more electronegative "donor" atom or group (Dn) is known as a hydrogen bond, or H-bond (Ac).Under 101.3 kPa and 75 °C, the maximum dissolved H2 (g) in H2O (l) would be present.At higher temperatures, the solvent molecules will have higher kinetic energy, allowing them to break the hydrogen bonds between the molecules and dissolve H₂ (g) more easily. At higher pressures, there will be more molecules of H₂ (g) in a given volume, increasing the chances of it dissolving into the solvent.
learn more about hydrogen bond Refer:brainly.com/question/21054466
#SPJ1
a substance that donates one proton when dissolved in water is called ?
100.0 ml of a 0.565 m solution of kbr is diluted to 500.0 ml. what is the new concentration of the solution?
The solution now has a concentration of 0.113 M.
When a solution is diluted, the amount of solute remains the same, but the volume of the solution increases. Therefore, the concentration of the solution decreases.
In this case, 100.0 mL of a 0.565 M solution of KBr is diluted to a total volume of 500.0 mL. The amount of KBr in the original solution can be calculated as follows:
amount of KBr = concentration x volume = 0.565 mol/L x 0.1000 L = 0.0565 moles
When this solution is diluted to a volume of 500.0 mL, the amount of KBr remains the same:
amount of KBr = 0.0565 moles
The new concentration of the solution can be calculated using the following equation:
new concentration = amount of solute / new volume
new volume = 500.0 mL = 0.5000 L
new concentration = 0.0565 moles / 0.5000 L = 0.113 M
Therefore, the new concentration of the solution is 0.113 M.
To learn more about concentration refer to:
brainly.com/question/10725862
#SPJ4
experiments show that if the chemical reaction takes place at 45 c, the rate of reaction of dinitrogen pentoxide is proportional to its concentration as follows: how long will the reaction take to reduce the concentration of to 50% of its original value? select the correct answer. question 4 options: t
The long will the reaction will take to reduce the concentration of to the 50% of its original value is 1386 sec. The option A is correct.
The expression is as :
d[N₂O₅] / dt = -0.0005 [N₂O₅]
[N₂O₅] (t) = [N₂O₅] (0) . e^-0.0005t
[N₂O₅](t) = Ce^-0.0005t
The reaction concentration of to the 50% of its original value is 0.5 C
0.5 C = Ce^-0.0005t
By dividing both side by C
0.5 = e^-0.0005t
Now taking the natural logarithm on the both side, we get
ln0.5 = lne^-0.0005t
ln 0.5 = - 0.0005t
t = - 0.693 / - 0.0005
t = 1386 sec
The time taken is 1386 sec. The correct option is A.
To learn more about reaction here
https://brainly.com/question/15709670
#SPJ4
Thus question is incomplete, the complete question is :
Experiments show that if the chemical reaction N2O5→2NO2+1/2O2, takes place at 45°C, the rate of reaction of dinitrogen pentoxide is proportional to its concentration as follows: -d[N2O5]/dt = 0.0005[N2O5] How long will the reaction take to reduce the concentration of N2O5 to 50% of its original value? select the correct answer. question 4 options:
A) t = 1386 sec
B) t = 211 sec
C) t = 2345 sec
D) t = 111 sec
enough of a monoprotic weak acid is dissolved in water to produce a 0.0102 m solution. the ph of the resulting solution is 2.68 . calculate the ka for the acid.
The Ka for the weak acid is 2.45 x 10^-6 of concentration 0.0102m .
To calculate Ka, first, we need to calculate the concentration of H+ and the initial concentration of acid. The weak acid is monoprotic, meaning it can donate only one hydrogen ion (H+) to water.Therefore, it will dissociate as follows: HA + H2O ⇔ A- + H3O+where HA is the acid molecule, and A- is its corresponding conjugate base.
The H3O+ is also known as a hydronium ion. The first step is to calculate the concentration of H3O+.The pH of the solution is 2.68.Hence, pH = -log[H3O+]2.68 = -log[H3O+][H3O+] = 1.58 x 10^-3The concentration of H3O+ is 1.58 x 10^-3 M. Since the weak acid is monoprotic, the initial concentration of acid is equal to the concentration of the conjugate base of the weak acid, which we get from the dissociation equilibrium.
The equilibrium expression for the dissociation of a weak acid is given as follows: Ka = [A-][H3O+]/[HA]We need to find the value of Ka. We have already calculated the value of [H3O+].So, Ka = [A-][1.58 x 10^-3 M]/0.0102 MWe need to calculate the value of [A-].
From the equilibrium equation for weak acid: HA + H2O ⇔ A- + H3O+0.0102 M x1.58 x 10^-3 M Here, x is the concentration of A-.So, 1.58 x 10^-3 M = x, which is also the concentration of the conjugate base of the weak acid. So, Ka = [A-][H3O+]/[HA] = (1.58 x 10^-3 M)^2/0.0102 M= 2.45 x 10^-6Therefore, Ka for the weak acid is 2.45 x 10^-6.
for more such questions on concentration .
https://brainly.com/question/14544663
#SPJ11
PLEASE HELP ME ITS DUE IN A COUPLE OF HOURS
PLEASE HELP
what is civic engagement in 150 words and what are your tips on water scarcity
The term "civic engagement" describes people actively participating in their communities and society as a whole. The lack of water scarcity in many areas of the world is a serious problem brought on by causes including population increase, climate change, and pollution.
What do you mean by a lack of water?In response to changing supply and demand throughout time, water availability varies. As demand rises and/or the amount or quality of the water supply declines, there is an increase in water scarcity.
Why should we manage the water shortage?When there is a water shortage, the primary issue is that people cannot get fresh, clean drinking water. The human body can only exist for a very short time without water, and not drinking other issues with water are covered in the section below.
To know more about climate change visit:-
https://brainly.com/question/28257810
#SPJ1
Question:
What is civic engagement in 150 words?
What are your tips on water scarcity?
Metallic behavior correlates with large atomic size and low ionization energy. Thus, metallic behavior increases down a group and decreases from left to right across a period.true or false
The statement "Metallic behavior correlates with large atomic size and low ionization energy. Thus, metallic behavior increases down a group and decreases from left to right across a period" is true.
The statement is true because metallic behavior correlates with large atomic size and low ionization energy. So, as you go down a group, the atomic size and ionization energy decrease, resulting in increased metallic behavior. As a result, when going from left to right across a period, the atomic size decreases, and the ionization energy increases, resulting in a decrease in metallic behavior.
As a result, the metallic behavior increases down a group and decreases from left to right across a period.
For more question on ionization energy click on
https://brainly.com/question/30831422
#SPJ11
A scientist performs a set of experiments. One experiment involves two compounds at a normal concentration. Another experiment requires the scientist to lower the concentration of both compounds in the experiment. How will the second experiment be different from the first?
The reaction will stop completely.
The reaction rate will not change.
The reaction rate will increase.
The reaction rate will decrease.
The reaction rate will decrease in the second experiment when the concentration of both compounds is lowered. This is because the rate of a chemical reaction is directly proportional to the concentration of the reactants.
How does the concentration of reactants affect the rate of a chemical reaction?The rate of a chemical reaction is directly proportional to the concentration of the reactants.
This is because increasing the concentration of the reactants increases the number of reactant molecules available to collide with each other, which results in a faster reaction rate.
What other factors can affect the rate of a chemical reaction, besides reactant concentration?Other factors that can affect the rate of a chemical reaction include temperature, pressure, the presence of a catalyst, and the surface area of solid reactants. Increasing temperature, pressure, or the surface area of solid reactants generally leads to a faster reaction rate, while the presence of a catalyst can increase the rate of a reaction without being consumed in the process.
To know more about compound,visit:
https://brainly.com/question/13516179
#SPJ1
what volume in ml of concentrated sulfuric acid (18.0)m h2so4) is needed to prepare 9.0l of a 1.00m solution?
You need 163.8 mL of concentrated sulfuric acid (18M) to prepare 9.0 L of a 1.00M solution.
The given problem can be solved using the molarity equation which is:
Molarity (M) = moles of solute (n) / liters of solution (L)
The balanced chemical equation for sulfuric acid (H2SO4) is:H2SO4 → 2H+ + SO42
The molecular weight of H2SO4 is 98g/mol.
Hence, 18M H2SO4 solution contains 98g/Liter.98g / 18M = 5.44 g/mL5.44 g/mL x 1000 mL/L = 5440 g/L5440 g / 98 g/mol = 55.102M
Concentrated sulfuric acid is 18M.
So, the volume of concentrated sulfuric acid (18M H2SO4) that is needed to prepare 9.0 L of 1.00M solution can be determined as follows:
Number of moles of H2SO4 in 9.0 L of 1.00M H2SO4 solution = 1.0 mol/L × 9.0 L = 9.0 mol
Total number of moles of H2SO4 in the final solution (1.00M) can be calculated as:9.0 mol / 55.102 mol/L = 0.1638 L = 163.8 mL (rounded to 2 decimal places)Therefore,
To know more about "Sulfuric acid" refer here:
https://brainly.com/question/1107054#
#SPJ11
radioactive decay is a first order kinetic process. radioactive decay is a first order kinetic process. true false g
The given statement "radioactive decay is a first-order kinetic process" is true because the number of radioactive nuclei that decay per unit time is proportional to the number of radioactive nuclei present.
Radioactive decayRadioactive decay is a natural process by which the unstable atomic nucleus loses energy by emitting radiation. This results in a change in the composition of the atomic nucleus, which is accompanied by a release of energy. The three types of radiation that can be emitted during radioactive decay are alpha particles, beta particles, and gamma rays.
Alpha particles are positively charged particles consisting of two protons and two neutrons, beta particles are negatively charged particles emitted by certain radioactive isotopes, and gamma rays are high-energy photons emitted by atomic nuclei during radioactive decay.
First-order kinetics is a type of chemical reaction in which the rate of reaction depends only on the concentration of one reactant. In other words, a first-order reaction is one in which the rate of reaction is proportional to the concentration of the reactant raised to the power of one. This means that the rate of reaction increases linearly with the concentration of the reactant. First-order kinetics is commonly observed in chemical and biochemical systems, as well as in radioactive decay.
In radioactive decay, the number of radioactive nuclei that decay per unit time is proportional to the number of radioactive nuclei present. This property of radioactive decay is called first-order kinetics.
Therefore, the given statement is true.
To learn more about "radioactive decay", visit: https://brainly.com/question/9932896
#SPJ11
what is the percent yield if this reaction produced 55.0 g of ethene from 100.0 g of ethanol?
The percent yield of a reaction is calculated by taking the amount of product produced and dividing it by the amount of reactant used, and then multiplying by 100 to get a percentage.
In this case, 55.0 g of ethene was produced from 100.0 g of ethanol, so the percent yield is 55.0 g divided by 100.0 g, multiplied by 100, which gives a percent yield of 55%.
This percent yield indicates the efficiency of the reaction, as the higher the percent yield, the more efficient the reaction is. A percent yield of 55% means that the reaction was relatively efficient, as the large majority of the reactant was converted into product. If the percent yield was much lower than this, it could indicate that there were some issues with the reaction and that it was not as efficient as it could be.
Know more about ethanol here
https://brainly.com/question/25002448#
#SPJ11
Help me with this is a project
The type of soap affects its cleansing ability and dishwasher soap because of the specialized formulation of dishwasher soap, which is specifically designed to remove grease and dirt from dishes.
How does the type of soap affect cleansing ability?Here is an experiment that explores the effect of the type of soap on the cleanliness of dishes:
Title: The Effect of Soap Type on Dish Cleaning Performance
Introduction: Soap is a commonly used cleaning agent for removing dirt and grease from various surfaces, including dishes. There are different types of soap available in the market, each with its unique composition and cleaning properties. In this experiment, we will investigate the effect of soap type (shampoo, hand soap, dishwasher) on dish cleaning performance.
Hypothesis: We hypothesize that the type of soap used will have a significant effect on dish cleaning performance, with dishwasher soap being the most effective due to its specialized formulation.
Materials:
Three different types of soap (shampoo, hand soap, and dishwasher soap)
Measuring cup
Three identical dirty dishes
Sink with running water
Stopwatch
Paper towel
Digital scale
Procedure:
Measure out 30 mL of each soap type into separate containers.
Weigh each of the three dirty dishes using a digital scale and record the weights.
Wet one dish in the sink and apply 10 mL of the first soap type to the dish.
Rub the dish with a paper towel for 30 seconds.
Rinse the dish with running water for 10 seconds.
Dry the dish with a paper towel and weigh it. Record the weight and note the cleanliness of the dish.
Repeat steps 3-6 with the remaining two types of soap on the other two dishes.
Repeat steps 3-7 for each soap type two more times with new dirty dishes, for a total of three trials per soap type.
Data Analysis:
Calculate the difference in weight between the dirty and cleaned dishes for each trial.
Calculate the average weight difference for each soap type.
Plot the average weight difference for each soap type on a bar graph.
Analyze the graph to determine the effect of soap type on dish cleaning performance.
Conclusion:
Based on the results of this experiment, we can conclude that the type of soap used has a significant effect on dish cleaning performance. The dishwasher soap was found to be the most effective in cleaning dishes, followed by hand soap and then shampoo.
Learn more about independent variables at: https://brainly.com/question/82796
#SPJ1
if a air mass is rising it must be
If an air mass is rising, it must be less dense than the surrounding air.
What happens when air mass is rising?If air mass is rising, it must be less dense than the surrounding air.
This is because when air rises, it is moving into an area of lower pressure than its initial location, which implies that there must be less air above it. Less air above means less weight above, hence resulting in lower density.
The less dense air mass will continue to rise until it reaches an altitude where it is equal in density to that of the surrounding air. This rising motion can lead to cloud formation and potentially precipitation, all depending on the moisture content of the air mass.
To know more about air mass, refer
https://brainly.com/question/26209372
#SPJ1
in your experiment, sodium bisulfite (nahso3) in water is used to destroy any unreacted bromine (br2) or to trap the br2 and not allow it to escape from the reaction setup. the reaction is shown below but can't be described using conventional organic curved-arrow pushing. after adding sodium bisulfite in your procedure, why is the resulting mixture put into acid waste?
In the experiment, sodium bisulfite (NaHSO3) in water is used to destroy any unreacted bromine (Br2) or to trap the Br2 and not allow it to escape from the reaction setup. The reaction is shown below but cannot be described using conventional organic curved-arrow pushing.
The resulting mixture is placed in acid waste for the following reasons:
Sodium bisulfite's addition to the reaction mix in the procedure is done to destroy any unreacted bromine (Br2) or to trap the Br2 and prevent it from escaping the reaction setup. Following the reaction, it is necessary to neutralize the mixture with sodium carbonate or another base. After that, the neutralized mixture should be properly disposed of in an acid waste container. Thus, the resulting mixture is placed in acid waste.
Sodium bisulfite is used in excess to the amount of bromine to ensure that all of the bromine is captured or reacted. The resulting mixture is extremely acidic as a result of the reaction. As a result, the mixture must be neutralized before being disposed of.
The most straightforward approach to neutralizing it is to add a basic substance like sodium carbonate, which reacts with the acidic mixture to create water and sodium sulfate (Na2SO4).
As a result, when sodium bisulfite is added in the procedure, the resulting mixture is put into acid waste.
To know more about "Sodium bisulfite" refer here:
https://brainly.com/question/14653628#
#SPJ11
based on the molar mass of anhydrous salt given to you by the teacher, calculate the moles of anhydrous salt. determine the smallest whole number ratio of moles of water to moles of anydrous salt.
To calculate the moles of anhydrous salt, divide the molar mass by the molar mass of the anhydrous salt.
The molar mass of an anhydrous salt is the sum of the molar mass of each of its components.
For example, if the molar mass of an anhydrous salt is 78.0 g/mol, then 78.0 g/mol/58.44 g/mol = 1.33 moles of anhydrous salt.To determine the smallest whole number ratio of moles of water to moles of anhydrous salt, divide the number of moles of water by the number of moles of anhydrous salt.
For example, if there are 2 moles of water and 1.33 moles of anhydrous salt, then the ratio of moles of water to moles of anhydrous salt is 2:1.33, which can be simplified to 2:1.Learn more about moles - brainly.com/question/24748125
#SPJ11
the cage size of the zeolites is in the centimeters scale
True False
The statement "the cage size of the zeolites is in the centimeters scale" is False.
What is Zeolite?Zeolite is a crystalline and porous alumino-silicate mineral consisting of hydrated alkaline metals and alkali earth metals. These minerals have microporous structures that make them useful in industrial and medical applications, among other things. They have a diverse array of applications, including as catalysts, adsorbents, and molecular sieves. Zeolites are minerals that have a unique framework that is capable of trapping and holding a variety of molecules within their microporous structure.
Zeolites are small in size, typically between 0.3 and 2 microns. The cavities or pores within these crystals, known as cages, are in the range of 4 to 12 Angstroms in size (1 Angstrom = 0.1 nm). These cavities are small, which allows the zeolite to selectively filter molecules based on their size, shape, and chemical properties.}
Learn more about Zeolite: https://brainly.com/question/27174988
#SPJ11
Don't mind the highlighted answer
The mass of [tex]SO_3[/tex] produced by reacting 6.3g of [tex]SO_2[/tex] with oxygen in the synthesis reaction is 7.875g.
Given the mass of [tex]SO_2[/tex] reacted = 6.3g
[tex]2SO_2(g) + O_2(g) -- > 2SO_3(g)[/tex]
We can see that 2 moles of [tex]SO_2[/tex] produce 2 moles of [tex]SO_3[/tex].
The mole ratio of [tex]SO_2[/tex] : [tex]SO_3[/tex] = 1 : 1
The molar mass of Sulfur dioxide = 64g/mol.
The number of moles of Sulfur dioxide reacted = 6.3/64 = 0.098mol
Since the mole ratio is 1 the moles of [tex]SO_3[/tex] produced = 0.098
The molar mass of Sulfur trioxide = 80g/mol
The mass of [tex]SO_3[/tex] produced = 0.098 * 80 = 7.875g
To learn more about moles click here https://brainly.com/question/26416088
#SPJ1
this portion of the titration curve of a strong acid with a strong base is the same as this region for a weak acid titrated with a strong base.
a. The portion after all of the base has been neutralized
b. The endpoint pH
c. The portion before the endpoint is reached
d. The buffer region
The portion of the titration curve of a strong acid with a strong base that is the same as the region for a weak acid titrated with a strong base is the buffer region. The correct answer is option: d.
In this region, the pH of the solution changes very slowly as small amounts of base are added to the acid. The buffer region occurs when the amount of base added is roughly equal to the amount of acid in the solution. The other options mentioned, including the portion after all of the base has been neutralized, the endpoint pH are specific to either strong acid or weak acid titration curves and do not apply to both.
To know more about acid titration , here
brainly.com/question/2728613
#SPJ4
Which of the following statements is true?
(a) An exothermic reaction will slow down when heated.
(b) The rates of all chemical reactions increase with temperature.
(c) Heating the reactants in an exothermic reaction causes the system to attain a state of equilibrium.
(d) Only exothermic reactions proceed spontaneously at room temperature.
Answer: A
Explanation: An exothermic reaction generates heat. Unless the reaction is cooled in some way, its temperature increases. If you increase the temperature with an external heater, it slows the reaction down or reverse its direction.
potassium hydrogen phthalate (khc8h4o4) is a weak acid whose ka is 3.91 x 10-6. what will the ph be at the half-equivalence point?
pH is 5.41 at equivalence point of equivalence point.
Potassium hydrogen phthalate (KHC₈H₄O₄) is a weak acid that has a dissociation constant (Ka) of 3.91 x 10^-6.
To determine the pH at the half-equivalence point of potassium hydrogen phthalate we need to know what is equivalence point is-
The half-equivalence point (pH = pKa) refers to the stage at which half the acid has been converted to the conjugate base, and the pH equals the pKa of the acid. At the half-equivalence point, the number of moles of acid that has been consumed is equal to the number of moles of base that has been consumed.
The formula for the calculation of pH at the half-equivalence point is given below:
pH = pKa + log (cB / cA)
Where,cB is the concentration of the conjugate base, and cA is the concentration of the weak acid.
Since the volume of the titrant is the same at the half-equivalence point, the concentration of the conjugate base and the weak acid will be the same.
So, pH = pKa = -log (3.91 x 10^-6) = 5.41
Therefore, the pH of potassium hydrogen phthalate (KHC₈H₄O₄) at the half-equivalence point is 5.41.
To learn more about equivalence point : https://brainly.com/question/24584140
#SPJ11
0.84g of aluminium reacted completely with chlorine gas. Calculate the volume of chlorine gas used (Molar gas volume is 24dm³, Al=27)
First, we need to calculate the number of moles of aluminum that reacted:
Molar mass of aluminum = 27 g/mol
Number of moles of aluminum = 0.84 g / 27 g/mol = 0.031 mol
According to the balanced chemical equation, 2 moles of aluminum react with 3 moles of chlorine gas to produce 2 moles of aluminum chloride. So, 0.031 moles of aluminum will react with:
0.031 mol Al x (3 mol Cl2 / 2 mol Al) = 0.0465 mol Cl2
Now, we can use the molar gas volume to calculate the volume of chlorine gas used:
Volume of Cl2 = (0.0465 mol Cl2) x (24 dm³/mol) = 1.116 dm³ or 1116 mL (rounded to 3 significant figures)
Therefore, the volume of chlorine gas used in the reaction is 1.116 dm³ or 1116 mL.