Answer:
B:acquisition
Explanation:
1. When working on charging systems, all of the fol-
lowing precautions should be taken except:
(A) never reverse polarity.
(B) always polarize the alternator.
(C) never short system terminals.
(D) detach the battery before part removal.
Answer:
c
Explanation:
You never want short system terminals
When you walk down the street, your muscles are supplying you with the __________ energy to move. (10 letters)
Answer:
momentum
Explanation:
'Energy' has the potential to:
Select one:
a. infer work.
b. do work.
c. release work.
d. store work.
answer:
Energy' has the potential to:do work
b.do work
What must be over your eyes at all times while working in the shop area ___________ ____________
Answer:
Eye protection/shields
Explanation:
There are different safety precautions prescribed by the Occupational Safety and Health Administration (OSHA).
Now, for the eye protection, it is recommended that eye go-ogles are worn to prevent flying objects entering the eye of colour blindness from exposure to welding sparks or flame.
What is cultural imperialism? .
A.
the impact of a nation’s culture on its trade policies
B.
the imposition of a foreign culture on a nation’s population
C.
the impact of culture on people’s buying and spending habits
D.
the spread of foreign culture through immigrants from various nations
Moving a door striker can be used to:
ext
Pretest: Introduction to Engineering and Technology
6
Select the correct answer from each drop-down menu.
Johnson wants to measure masses of smaller objects and Eric wants to create Images of an organ. Help them determine which devices they c
use.
can be used to create Images of
can be used to measure masses of smaller objects.
an internal organ.
Reset
Next
What is the BEST definition of engineering?
the observation of the natural world to develop theories
to make predictions about what will happen in certain circumstances
to create a base of knowledge about the world we live in
to apply scientific knowledge to solve real-world problems
Answer:
D. to apply scientific knowledge to solve real-world problems
Explanation:
Engineering involves with Science, Technology. It makes things useful to people.
I hope it helps! Have a great day!
pan~
If 2.508 kg of a substance increases in temperature by 4.051*C when it absorbs 3.42 kj of energy, what is the specific heat of the substance?
The specific heat of the subtance if 2.508 kg of a substance increases in temperature by 4.051°C when it absorbs 3.42 kj of energy is 0.3366 J/g/°C
What is specific heat?
Specific heat, the quantity of heat required to raise the temperature of one gram of a substance by one Celsius degree.
Given that 2.508 kg of a substance increases in temperature by 4.051*C when it absorbs 3.42 kj of energy. Let c represent the specific heat, hence:
3420 J = 2508 g * 4.051*C * c
c = 0.3366 J/g/°C
The specific heat of the subtance if 2.508 kg of a substance increases in temperature by 4.051°C when it absorbs 3.42 kj of energy is 0.3366 J/g/°C
Find out more on specific heat at: https://brainly.com/question/13439286
Which of the following describes what happens in the final stage of a product's life cycle?
O It is developed using sustainable materials.
O It is delivered to a retailer to be sold.
O It is used by the consumer.
O It is discarded or recycled.
Answer:
It is discarded or recycled.
Explanation:
MARKING BRAINLIEST
Do you think fillet in CAD (computer aided design) makes your designs look better?
Answer:
Yes, I believe that filleting can make your designs look better (but not always). There is a reason why in the design industry, people use squircles (square that is filleted) instead of squares. An example of this happening is in the app logos in phones. There is a reason why your app store or itunes logo is not a perfect square.
Explanation:
A compound sliding miter saw can be used to make
cuts.
A. rip
B. plunge
C. bevel
D. All of the above.
Answer:
D
Explanation:
PLEASE HELP!!!!
Your local government is researching the water management in the area. They have called on you as an environmental engineer to
explain the current water management methods. You have been asked to describe the methods used by at least two other local areas
and suggest the feasibility of adopting a new method. You must research this issue and provide your resources to support your
reasoning. You may contact the local governments and find a person to interview, or you may research the issue, in magazines or on
the Internet. You will submit a three-to five-page report that includes a description of your area's water management methods,
information about at least two other nearby areas, and a final analysis with a recommendation for a method. The recommendation
may be that no change is made, but you must support your decision with facts and details found in your research.
Answer:
Water resource systems have benefited both people and their economies for many centuries. The services provided by such systems are multiple.
Explanation:
8th grade safety test
If my fingers will get closer than 2" to the blade I should use a _______ ________
i to finish the cut.
1. scrap
2. chunk of wood
3. steel
4. bar
5. leather
6. glove
Answer:
steel to remain safe from blade and to get the work done
A modem uses 8.4 W to operate, and its transformer draws 15 W of power. What is its percent efficiency?
Answer:
Substitute these values in the power equation: Power = 10 amps × 120 volts = 1200 watts, or 1.2 kilowatts
Which side of the disc sander do you sand on
1. Right
2. Left
3. Up
4. Down
[tex]\mathbb \orange{Answer} [/tex]
[tex]\mathbb \red{ Left} [/tex]
The best grade of hardwood lumber that is generally available is _____
Answer:
FAS
Explanation:
first and second grade
In a free market system, price controls can include both floors and
In a free market system, price controls can include both floors and ceiling.
Answer: Ceiling
Explanation: Edge Cumulative Exam 2022
If a student doesn't major in Engineering as an undergraduate, They could still find a successful
career in a field/s of Engineering.
O True
False
Answer:
True
Explanation:
It could either be true or false because you dont really have to be great at something just to do it, you could try new things too.
Drag the tiles to the correct boxes to complete the pairs.
Match each example to the respective technology
internal combustion engine
electric motor
semiconductor
wireless technology
transistor
fan
steam engine
Global Positioning System (GPS)
>
Explanation:
electric motor: fan
semiconductor:
wireless technology: transistor
Why is GoPro the easiest way to capture and share your experiences?
Answer:
GoPro cameras have a fixed 170-degree lens. This allows for wide-angle photos and videos. Basically, at 170-degrees, it will capture almost everything in front of the camera. To get absolutely everything, it would need another 10-degrees
Explanation:
This is for electricity class please help!!!
A common input device is a_____
An output device is also called a______
An electrical _____diagram uses standard symbols to show the components of a circuit and how they are connected
A power supplies feature to provide a constant current or voltage is called____
Battery depends on a ______ reaction to produce electricity
How do you produce a well-constructed survey questionnaire?
Answer:
Explanation:
Define the purpose of the survey.
Make every question count.
Keep it short and simple.
Ask direct questions.
Ask one question at a time.
Avoid leading and biased questions.
Explain what you would include in designing a beachfront house in today's world !) energy sources 2) protection from rising sea levels 3) materials used in building houses. Bullet point information
Answer:
I would use windmills and solar panels for energy
I would build it on a support stand
.wood
.glass
Explanation:
wood grows back
glass is made out of sand, which there is plenty of on the beach
support stand makes the water go under the house not in it
both solar panels and windmills are renewable energy sources
plese help me for this
Answer:
YES I WILL HELP YOU BUT YOU MUST FOLLOW ME THEN I WILL GIVE ANSWER OF THIS QUESTION
True or False? Communication takes place only at the end of the
engineering design process.