PLEEEAASSSSEEEE HELP ME!!
Answer:
I cant see the words
Explanation:
how to go to music on shcool computer
Answer: I think you leasen because if you have the internet of school or you have your hootspot
Explanation:
Answer:
You need wifi unless the school lets you use the wifi from there
Explanation:
PLEASE HELP! I AM TAKING A TEST
On a bicycle Chain and Sprocket: Which of the following gear ratios will give you the most Torque at
the back tire?
Driver 6"; Driven 6"
O Driver 6"; Driven 4"
O Driver 6"; Driven 2.5"
O Driver 2.5"; Driven 6"
Answer:
2.5
Explanation:
How much thermal energy is needed to raise the temperature of 15kg gold from 45⁰ C up to 80⁰ C
Answer:
68.25 kJ
Explanation:
The thermal energy Q required to raise the temperature of 15kg gold from 45⁰ C up to 80⁰ C is Q = mcΔθ where m = mass of gold = 15 kg, c = specific heat capacity of gold = 130 J/kg°C and Δθ = temperature change = θ₂ - θ₁ where θ₁ = 45 °C and θ₂ = 80 °C
So, Q = mcΔθ = mc(θ₂ - θ₁)
= 15 kg × 130 J/kg°C × (80 °C - 45 °C)
= 1950 J/°C × 35 °C
= 68,250 J
= 68.25 kJ
Technician A says when you ground a circuit, you hook it back to the positive side of the battery.
Answer:
Technician A should not only be fired but arrested for how incompetent and negligent he is.
Explanation:
Grounding a circuit is when you attach the ground wire to a clean metal surface that will disperse the excess electrical charges over a wide area so as not to create a shock.
1.
affects the straight-line motion of a flying object by pulling it
down toward the ground.
A Buoyancy
B. Density
C. Gravity
D. Pressure
Whats the difference between GeForce GTX 1060 and Geforce GTX 3060? Is there any big changes to FPS and other settings?
Answer:
uhhhhh, are you kidding? a GTX 3060 is far better than a 1060 ding dong
Explanation:
Answer:
i have a new pc with a 3090 but i had a 3060 before and the difference is GOOOOOD
Explanation:
why did the Underground Railroad run all the way to Canada and not simply stop in the northern free states
Answer:
Sometimes passengers stopped when they reached a free state such as Pennsylvania, New Jersey, or Ohio. After 1850, most escaping slaves traveled all the way to Canada. ... The reason was that the United States Congress passed a law in 1850 called The Fugitive Slave Act.
Explanation:
PLEASE MARK ME AS BRAINLIEST
The American Society of Mechanical Engineers (ASME) updates their entire code every _____.
A.
a year
B.
2years
C.
3years
D.
5years
Answer:
I think the answer is C. hope this helps
Explanation:
If the IMA of a wedge is calculated to be 4.0 and the AMA of the same wedge is calculated to be 3.0, then what is the % efficiency of the wedge?
4 ft – 6 ½ in. to inches. Record your answer in fractional inches.
Given that
4 ft – 6 ½ in.
To find,
We need to convert it it inches.
Solution,
We know that,
1 foot = 12 inches
4 feet = 4×12 inches
= 48 inches
[tex]4\ ft-6\dfrac{1}{2}\ in=48\ in+6\dfrac{1}{2}\ in\\\\=48+\dfrac{13}{2}\\\\=54.5\ \text{inches}\\\\=\dfrac{109}{2}\ \text{inches}[/tex]
Hence, 4 ft – 6 ½ in = 54.5 inches = 109/2 inches
If a user inputs 34.8 when the program was seeking an integer for the variable, this will cause an error called a Numerical Error.
true
false
Answer:
false
PLEASE MARK ME AS BRAINLIEST
Explanation:
disconnecting a circuit while in operation can create a voltage blank
Answer:
what is the question
Explanation:
confused
Why are communication (verbal, written and drawing) skills so important to have as an engineer?
Answer:
Both written and verbal communication skills are of the utmost importance in business, especially in engineering. Communication skills boost you or your teams' performance because they provide clear information and expectations to help manage and deliver excellent work.
chevy, ford, or dodge?
Answer:
Chervolet would be since I like the Camaro
If i have a camaro i would like it like this
Explanation:
Answer:
I like dodge because of the amount of horsepower in the engines they use and I love how they make their challenger so close to the original
Information such as tolerances and scale can be found in the _______________ of an engineering drawing.
Answer:
Information such as tolerance and scale can be found in the title block of an engineering drawing
Explanation:
The title block of an engineering drawing can normally be found on the lower right and corner of an engineering drawing and it carries the information that are used to specify details that are specific the drawing including, the name of the project, the name of the designer, the name of the client, the sheet number, the drawing tolerance, the scale, the issue date, and other relevant information, required to link the drawing with the actual structure or item
Would you rather be fishing or hunting?
Answer:
probs fishing
Explanation:
Answer:
hunting sis.
Explanation:
A hand crank generator is used to power a light bulb. The person turning the crank uses 22 Newtons of input force to turn the crank 8 revolutions in 3 seconds. Each revolution of the crank equals 0.3 meters of distance that his hand moves. A multimeter connected to the light bulb records 0.08 amps of current and 9.04 volts.
1. Calculate the input power of the hand crank generator in Watts.
2. Calculate the output power of the hand crank generator in Watts.
3. Calculate the efficiency of the hand crank generator.
Answer:
1. The input power is 17.6 Watts
2. The output power is 0.7232 Watts
3.The efficiency of the hand crank generator is approximately 4.109%
Explanation:
The given parameters are;
The force with which the crank generator is turned = 22 Newtons
The rate at which the crank is turned = 8 revolutions per 3 seconds
The distance the hand moves during each revolution = 0.3 meters
The current recorded by the multimeter = 0.08 amps
The voltage recorded by the multimeter = 9.04 volts
1. Power = The rate of doing work = Work done/(Time taken to do the work) = Force × Distance/Time
∴ The power input of the hand crank generator = 22 × 0.3 × 8/3 = 17.6 Watts
2. The power output to the bulb, P, is given by the formula for electrical power as follows;
Power = Current, I × Voltage V
∴ P = 0.08 × 9.04 = 0.7232 Watts
3. Efficiency in percentage = Output/Input × 100
Therefore, the efficiency of the hand crank generator = )Output power/(Input power)) × 100 = (0.7232/17.6) × 100 ≈ 4.109%
tell me why i feel like every other person thats on here is on here bc their grounded...?
Answer:
becuz u have a gut feeling
Explanation:
ask ur gut
1 point
The image here shows a human arm. This is a good example of:
Biceps
Triceps
Tendon
a 1st class lever
a 2nd class lever
a 3rd class lever
a 4th class lever
Which of the following identifies the limitations of green engineering?
A. competition and cost
B. resources and cost
C. geography and cost
D. pollution and cost
Answer:
Resources and Cost
Explanation:
Cost: Sustainable choices can value a lot of as a result of they price makers more to provide. Thus, there'll always be an oversized initial investment once selecting a green element for your home. Resources: Sustainable materials don't seem to be always as without delay available as their less eco-friendly alternatives.Hope it helps!<3
Answer:
resources and cost
Explanation:
Shan works in an airport, up in the high tower. He is an air traffic controller who coordinates between the pilots in the air and the crew on the ground. The pathway in the Transportation and Logistics cluster that Shan's job falls into is _____.
Transportation Systems/Infrastructure Planning, Management & Regulation
Facility & Mobile Equipment Maintenance
Logistics, Planning and Management Services
Warehousing & Distribution Center Operations
100 POINTS PLS DO NOT SCAM I NEED THE ANSWER ASAP
Answer:
Transportation System/Infrastructure Planning, Management & Regulation
Explanation:
Because well the other ones such as Warehouse, is not even applicable
Answer:
Transportation Systems/Infrastructure Planning, Management & Regulation
Explanation:
I took the test
Tech A says that some battery corrosion cannot be seen beneath the insulation of the cables. Tech B says
that an engine cranking voltage drop test is the best way to detect high resistance caused by corrosion. Who
is correct?
Select one:
a. Technician A
b. Technician B
c. Both Technician A and B
d. Neither Technician A nor B
Answer: the answer is c
Explanation:
How has
our national anthem helped to
promote unity in diversity
Answer: National anthem contributed to the development of unity diversity in nepal; The Sayaun Thunga Phool Ka was officially adopted as national anthem of Nepal on 3rd August 2007. This anthem which means made of hundred flowers strongly portrays the great unity and diversity of Nepalese people.
Explanation:
Type the correct answer in the box. Spell the word correctly. What is the best option possible for Gary to create an effective presentation? Gary and his team have created a new device that can help to dry clothes faster. He has to explain the mechanism of the invention to his clients through an online presentation. He would use (BLANK) tools to create accurate and uniform technical drawings for his device.
Answer:
Computer Aided Design (CAD)
Explanation:
The computer-aided design, CAD, tools are design and technical documentation technology, that makes use of an automated drafting process of drafting, rather than a manual drafting process.
Computer-aided design programs include CAD programs with 2D and/or 3D capability such as AutoCAD LT, AutoCAD, and SmartDraw which are common construction documentation drafting application with which concepts and ideas can be created and visualized
Therefore, we have;
He would use Computer-Aided-Design (CAD) tools to create accurate and uniform technical drawings for his device.
Oliver is designing a new children’s slide to increase the speed at which a child can descend. His first design involved steel because it is a very strong material that can also be smooth. He found this was not a good option after all. Which explanation most logically explains why the steel was not optimal for this project?
A) Steel becomes too hot in the sun and can burn the children.
B) Steel is a composite material, and these rarely work well when building prototypes.
C) Steel is too malleable and therefore not sturdy enough.
D) Steel is an inorganic material, and these are rarely efficient.
Answer:
The correct option is;
A) Steel becomes too hot in the Sun and can burn the children
Explanation:
The properties of steel includes;
Low specific heat capacity, high thermal and electrical toughness, high hardness, high tensile strength, high yield strength, appreciable elongation, high fatigue strength, can easily corrode, high malleability and ability to creep
Therefore, due to the low specific heat capacity, which is 0.511 J/(g·°C) and high conductivity of steel which is about 32 W/(m·k), the temperature of the steel can rapidly rise and the hot steel surface can readily conduct the heat, (due to the temperature difference) to other bodies that come in contact
Answer:
Steel becomes too hot in the sun and can burn the children.
Explanation:
i will mark as brainliest !
You get on your bike and pedal one rotation how far does the bike travel (if it stops right when the
pedal completes 1 rotation)? The diameter of the pedal sprocket is 2.5 inches. The diameter of the
wheel sprocket is 6 inches. The diameter of the back wheel is 24 inches.
Answer:
7.8 Mph
Explanation:
Rate of cycling = 1.1 rev/s
Rear wheel diameter = 26 inches
Diameter of sprocket on pedal = 6 inches
Diameter of sprocket on rear wheel = 4 inches
Circumference of rear wheel = \pi d=26\piπd=26π
Speed would be
\begin{gathered}\text{Rate of cycling}\times \frac{\text{Diameter of sprocket on pedal}}{\text{Diameter of sprocket on rear wheel}}\times{\text{Circumference of rear wheel}}\\ =1.1\times \frac{6}{4}\times 26\pi\\ =134.77432\ inches/s\end{gathered}Rate of cycling×Diameter of sprocket on rear wheelDiameter of sprocket on pedal×Circumference of rear wheel=1.1×46×26π=134.77432 inches/s
Converting to mph
1\ inch/s=\frac{1}{63360}\times 3600\ mph1 inch/s=633601×3600 mph
134.77432\ inches/s=134.77432\times \frac{1}{63360}\times 3600\ mph=7.65763\ mph134.77432 inches/s=134.77432×633601×3600 mph=7.65763 mph
The Speed of the bicycle is 7.8 mph
Technician A says that the gear ratios in the transmission give the vehicle an extended operating range.
Technician B says that the final drive assembly has various gear ratios that can be selected with a
gearshift lever. Who is correct?
Select one:
O a. Technician A
O b. Technician B
O c. Both A and B
O d. Neither A nor B
Based on the fact that Technician A says that the gear ratios in the transmission give the vehicle an extended operating range and Technician B says that the final drive assembly has various gear ratios that can be selected with a gearshift lever,
The person that is correct between the two of them is Technician A and this is because the gear ratios in the transmission shows how each gear which has a different diameter, and each of the axes rotates at a different speed when they are both engaged
What is a Gear Ratio?This refers to the ratio between the rotational speeds of two meshing gears.
Hence, we can see that Based on the fact that Technician A says that the gear ratios in the transmission give the vehicle an extended operating range and Technician B says that the final drive assembly has various gear ratios that can be selected with a gearshift lever,
The person that is correct between the two of them is Technician A and this is because the gear ratios in the transmission shows how each gear which has a different diameter, and each of the axes rotates at a different speed when they are both engaged
Read more about gear ratio here:
https://brainly.com/question/1567503
#SPJ1
D. projectile
3. A
is the curved path a launched object takes as it moves
forward and accelerates downward.
A. parabola
B. rhombus
C. spheroid
D. torus
which ctatement about traiectory is true?
Which task does a landscape architect perform?
select the correct answer
A. planning gardens
B. arranging
C. overseeing the construction site
D. inspecting construction
Answer:
B
Explanation:
Answer:
the answer is b
Explanation: