Interstitial lung disease is low lung compliance as a result, last of electrical lung tissue destruction.
Interstitial lung disorders brought on by breathing in particles like silicon and asbestos (asbestosis) can cause low lung compliance (silicosis).
Lungs and the pleural cavity have the capacity to expand and contract in response to variations in pressure. Lung compliance, which is a key determinant of lung health and function, is defined as the volume change per unit of pressure change across the lung. Lung compliance varies between inhalation and expiration because measurements of lung volumes vary between the two at the same pressure. Depending on whether only volume and pressure are measured (static) or whether their variations over time are also recorded, lung compliance can be classified as either static or dynamic.
know more about lungs here
https://brainly.com/question/13210870#
#SPJ4
How much heat is given off when 210.0 g of water at 0°C freezes into ice?
Answer:
it gives off 71.0 kJ of heat.
Explanation:
Select the correct answer. if you have a heat engine with a hot reservoir of 515 k and a cold reservoir of 190 k, what is the maximum possible thermal efficiency of the system?
a. 63.1%
b. 75.2%
c. 52.1%
d. 67.9%
The maximum possible thermal efficiency of the system is d. 67.9%.
By utilizing the physics of heat engines and Second Law of Thermodynamics, we can calculate that the maximum achievable efficiency of a heat engine with a hot reservoir at 515 k and a cold reservoir at 190 k is 67.9%.
This result serves as an upper limit for all practical engines, regardless of the specifics of their design or engineering capabilities.
Making this maximum efficiency is possible through improvements in technology and increased knowledge on thermodynamics and energy production.
To learn more about thermal, click here:
https://brainly.com/question/19666326
#SPJ4
Answer: A.
63.1%
Explanation: edmentum
If there is no angle on the plane wing you can't push the plane downward to create what? WILL GIVE BRAINLIEST PLS HELP

Answer: i think the answer is lift
Explanation:
Jessica is riding on a Merry-go-round on an outer horse that sits a distance of 8.0m from the center of the ride. Jessica’s sister, Julie, is on an inner horse located 6.0m from the ride’s center. The Merry-go-round turns once every 40 s. Explain which girl is moving with the greater linear speed.
Jessica's linear speed is faster.
We must first define linear speed in order to respond to the query.
How fast is linear motion?This is the tangential speed of an item moving in a circle. Given by the formula v = r,
r is the object's distance from the circle's center, and is its angular speed.
Given that Julie, Jessica's sister, is riding an inner horse that is placed 6.0 meters from the center of the merry-go-round and Jessica is riding an outside horse that is 8.0 meters away from the center of the ride. The merry-go-round is also rotating at a consistent speed.
Given that v = r and = constant for linear motion,
So, v ∝ r.
Therefore, the girl who was farther away from the merry-go-center round's would move at a faster linear rate.
Since
Julie is at r, and Jessica is at r' = 8.0 m "= 6.0 m.
Since
r' = 8.0 m > r and v r "= 6.0 m,
Jessica's thus has a faster linear speed.
To learn more about Linear Speed from given link
https://brainly.com/question/27391749
#SPJ1
Which of the following conditions should be met to make a process perfectly reversible?
Check all that apply.
(1) Any mechanical interactions taking place in the process should be frictionless.
(2) Any thermal interactions taking place in the process should occur across infinitesimal temperature or pressure gradients.
(3) The system should not be close to equilibrium.
1) Any mechanical interactions taking place in the process should be frictionless, to make a process perfectly reversible
What is mechanical interactions?
Mechanical interactions are physical forces that are used to affect the behavior of objects and materials. This can include contact forces such as friction, tension, and compression, as well as non-contact forces such as gravity, magnetism, and electric fields
Mechanical interactions can be used to cause objects to move, change shape, or experience a change in energy. These interactions can also be used to create, store, or transfer energy. Mechanical interactions are studied by engineers and scientists in multiple disciplines, and are used in many different applications, including the design of machinery, medical devices, and consumer products.
To learn about more mechanical interactions
https://brainly.com/question/13249269
#SPJ4
Why are dynamic flexibility tests not used as often as?
Dynamic flexibility tests are not used as often as static flexibility tests because dynamic flexibility tests involve more subjective measurements.
Static flexibility tests are more common in comparison to dynamic tests because static flexibility tests are easier to replicate. It is difficult to standardize motion-based tests such as dynamic flexibility tests between various subjects, while static flexibility tests are simple and easy to standardize it is because the metrics are fixed and not open to interpretation.
Since, dynamic flexibility tests are hard to perform because they measure the amount of stress on a muscle that is in motion. And it is difficult to assess this among multiple people and to get an accurate picture. That is why these tests are not used as often as static flexibility tests.
"
Complete question
Why are dynamic flexibility tests not used as often as static flexibility tests?
"
You can learn more about dynamic flexibility tests at
https://brainly.com/question/15720248
#SPJ4
Define the following
a. Length:
b. Density:
c.Mass:
d. Volume:
e Standard:
Answer:
a.the measurement or extent of something from end to end; the greater of two or the greatest of three dimensions of a body.
b.is the measurement of how tightly a material is packed together. It is defined as the mass per unit volume.
c.Mass is a physical magnitude and general property of matter that expresses the inertia or resistance to change in motion of a body.
d.Mass is a physical magnitude and general property of matter that expresses the inertia or resistance to change in motion of a body.
e.
A myopic person sees that her eyeglasses perscription is -4.00 D, for eyeglasses positioned 1.75 cm from her eyes. What is her far point?
After solving the problem the person's far point is 25 cm
What is myopic person?
A myopic person is someone who is near sighted and is unable to clearly see objects that are far away. This is caused by the eyeball being too long and the cornea having too much curvature. Light entering the eye is focused in front of the retina rather than directly on it, resulting in blurred vision for distant objects. Myopia is a common eye condition and can usually be corrected with glasses or contact lenses. In more severe cases, laser surgery may be necessary. People with myopia may need to wear their glasses or contact lenses all the time in order to see clearly, but they may be able to take them off when they are close to something they want to see clearly.
The far point is the farthest distance at which a person can see clearly without any corrective lenses.
The formula for calculating far point is 1/f = 1/d + 1/p, where f is the far point, d is the distance from the eye to the lens (1.75 cm in this case), and p is the power of the lens (in diopters) which is -4.00 D.
Plugging the values into the formula yields 1/f = 1/1.75 + 1/-4.00, which simplifies to 1/f = 4.00 - 0.5714. Solving for f gives f = 0.2500, or 25 cm.
Therefore, the person's far point is 25 cm.
To learn more about myopic person
https://brainly.com/question/13257948
#SPJ4
How are stage and film versions of a drama similar the viewer must infer the mood from the lighting and sound effects?
Stage and film versions of a drama are similar in that the audience must use context clues such as lighting, sound effects, and dialogue to infer the mood of a scene. This requires the audience to pay attention to the details of the performance, as subtle changes in these elements can drastically change the overall tone of the production.
The main difference between a stage and film version of a drama is that a stage production relies heavily on the physicality of the actors and their interactions with one another, while a film production relies heavily on the technical aspects such as camera angles, lighting, and sound design. Additionally, a stage production is performed live in front of an audience, while a film is created in a studio and viewed later by an audience.
Learn more about film versions:
https://brainly.com/question/20500638
#SPJ4
If a team pulls with a combined force of 9000 N on an
airplane with a mass of 30,000 kg, what is the acceleration
of the airplane in m/s2? Record your answer in the grid
below. Show all work!
Answer:
F=MA
A=F/M
A=9000/30000
A=0.3
Construct the following SI derived unit, the coulomb, and define the faraday. A coulomb is a measure of and has units of: 1 A faraday is a constant and has a value of: (include units)
A coulomb is a measure of electrical charge and has units of amperes times seconds (A⋅s). A faraday is a constant equal to the magnitude of electric charge per mole of electrons of 96,485.3399 Coulombs (C).
What is magnitude?
Magnitude is a measure of the size or scale of an object or event. It is often used to describe the intensity or severity of a phenomenon, such as earthquakes and hurricanes. It is usually expressed as a number on a logarithmic scale. In astronomy, magnitude is used to measure the brightness of stars and other celestial bodies. On Earth, magnitude is often used to measure the size of earthquakes and other seismic events. Magnitudes are typically expressed as a number on a logarithmic scale, with a greater magnitude indicating a larger size or scale of the event. Magnitudes can also be used to measure the intensity of light, sound, and other forms of energy.
To learn more about magnitude
https://brainly.com/question/30015989
#SPJ4
Could Aliens 65 Million Light Years Away from Earth See Dinosaurs Alive? If aliens can see the dinosaurs, what problems might there be? If aliens couldn’t see the dinosaurs, why not?
Answer:Now this question can go ways
Explanation:
1: YES= Because they have super advanced technology and the aliens could fly to earth steal our resources and then experiment on the dinosaurs.
2:NO they did not have enough tech yet to support that much length and they just never look or find earth
ME PERSONALLY I WOULD CHOOSE 1 but, up to you
If household voltage is 120 volts, what is the resistance created by the light bulb with 0.5 amps of current flowing through it?
Answer:
R = 240 Ω
Explanation:
The resistance created by the light bulb can be calculated by using Ohm's Law:
[tex]V = IR\\\\R =\frac{V}{I}[/tex]
where,
R = Resistance created by the light bulb = ?
V = Voltage across the bulb = 120 volts
I = current passing through the light bulb = 0.5 A
Therefore,
[tex]R = \frac{120\ volts}{0.5\ A}[/tex]
R = 240 Ω
True or False: As distance between 2 objects increases, the gravitational force decreases
Answer:
True
Explanation:
Because it is:)
What is the difference between active and passive flexibility?
The difference between active flexibility and passive flexibility is that in active flexibility, we rely on our own muscle power to reach the end range, but in passive flexibility, we rely on an external push to reach the end range.
According to the findings of recent studies, active flexibility has a stronger connection to a person's level of sporting performance than passive flexibility does. The ability to build active flexibility is more difficult to achieve than passive flexibility. Active flexibility involves passive flexibility in addition to muscle strength in order to be able to retain and maintain the initial extended position.
To learn more about active flexibility and passive flexibility, click here:
https://brainly.com/question/14345573
#SPJ4
How do solids, liquids, and gases change from one state to another? What makes water (H2O) a simple type of matter to work with here on Earth?
Answer:
All change in their form in relation to amount of heat energy.
Explanation:
Due to the chemicals bonds that are within these forms of matter. The solids are compact and have strong bonds where the atomic molecules are attached to each other firmly. While in gases the bonds are least developed and molecules are able to move freely with the least friction. In water, the bonding is neither compact nor loose. All this is possible due to the addition of heat to molecules as they gain energy they start to move. Hence changes their forms, while the water molecules one hydrogen bond that is attached to nonbonding pairs of electrons. The water molecules form and reform continuously.A crate of eggs is located in the middle of a pickup truck as the truck rounds a corner in the road. The curve has a radius of 35 m. If the coefficient of static friction between the crate and the truck is 0.600, how fast can the truck move without the crate sliding
The speed of the truck is 14.3m/s without the crate sliding.
What is the equation for static friction?The resistive friction force (Fr) multiplied by the usual or horizontal pressure (N) pushing the things together yields the frictional coefficient (fr), which is a numerical value. The formula fr = Fr/N serves as a representation of it.
Calculation -:Call the mass of the egg crate m. The forces on it are its weight Fg =mg vertically down, the normal force n of the truck bed vertically up, and static friction (fs) directed to oppose relative sliding motion of the crate on the truck bed. The friction force is directed radially inward. It is the only horizontal force on the crate, so it must provide the centripetal acceleration. When the truck has maximum speed, friction fs will have its maximum value with fs=μn.
Newton’s second law in component form becomes
∑Fy=ma(y) giving n−mg = 0 or n = mg
∑F(x)=ma(x) giving f(s)= ma(r)
From these equations
μ(s)n ≤ mv²/r and μ(s)mg ≤ mv²/r
The mass divides out. The maximum speed is then
v≤[tex]\sqrt{}[/tex]μrg =[tex]\sqrt{}[/tex]0.600(35.0m)(9.80 m/s²) = v ≤1 4.3m/s.
To know more about static friction visit :
brainly.com/question/13000653
#SPJ4
a tennis player hits a tennis ball with a force of 15N and moves it 25m . of the tennis players power output was 750W, find out how long they did work on the tennis ball for
When we do, we make sure to measure our mass in kilograms. We determine that F is equal to 124.26 newtons by entering these numbers into our calculator.
That is the average magnitude of the force applied to the tennis ball.
How is the force of a tennis serve calculated?The equation that Newton was referring to is shown by a serve. You can calculate the total force that was applied by the tennis racket to the ball by multiplying the weight of the racket by the speed at which the player swings their racquet.
After serving, how much does a tennis ball slow down?An average 120-mph serve slows to 82 mph before the bounce, 65 mph after the bounce, and 55 mph at the opponent's racket, according to tennis instructor and analyst John Yandell.
To learn more about mass here:
https://brainly.com/question/15959704
#SPJ1
What is the lever arm between F and the pivot point?
A revolving bar that pivots on a fixed point serves as the lever arm between F and the pivot point.
The pivot is the elbow, while the forearm acts as the lever arm. The biceps muscle exerts the effort and bends the forearm in spite of the forearm's weight and whatever additional weight the hand may be carrying. The weight is farther away from the pivot than the effort.
The lever is a rotating bar that pivots on a fulcrum affixed to a fixed point. By applying forces at different angles in reference to the pivot or fulcrum, the lever generates motion. When the lever spins around the fulcrum, points farthest from it move faster than ones nearer to it.
The lever is a rotating bar that pivots on a fulcrum affixed to a fixed point. By applying forces at different angles in reference to the pivot or fulcrum, the lever arm generates motion. When the lever spins around the fulcrum, points farthest from it move faster than ones nearer to it.
For such more question on lever arm .
https://brainly.com/question/11661286
#SPJ4
Diana raises a 1000 N piano using a set of pulleys. She use 250 N force to pulls in 20.0 m of rope. What is the distance
Using a set of pulleys, Diana hoists a piano weighing 1000 N. To draw in 20.0 m of rope, she applies 250 N of force. The separation is 5m.
given,
Load force = 1000 N
Effort distance = 20.0 m
Effort force=250N
If this were an ideal machine, we could calculate the force Diana applied as follows:
The equation that follows links load force to effort force for a perfect machine;
Effort force × effort distance = Load force × Load distance
When we enter the parameters into the formula, we get;
Load distance = Effort force × effort distance/Load force
=250×20/1000
= 5 m
Load distance = 5 m
In mechanics, force is any action that tends to maintain or alter the motion of a body or distort it. The concept of force is commonly explained in terms of Isaac Newton's three laws of motion, as stated in his Principia Mathematica (1687). Newton's first principle states that a body at rest or moving at a uniform rate in a straight line will remain in that state until some force is applied to it. The second law states that when an external force acts on a body, it causes an acceleration (change in velocity) of the body in the direction of the force.
Learn more about force here:
https://brainly.com/question/28875770
#SPJ4
If a singer was always singing louder than everyone else in their section, what would you recommend they do to improve in balancing and blending their voice with the rest of the choir?
05
Which of these is NOT a definition of power?
A Rate of doing work
Rate of change of velocity
Destanstes ser second
Answer:
Option C. Rate of change of velocity
Explanation:
To know the correct answer to the question, it is important we know the definition of power.
Power can be defined as the rate at which work is done. Mathematically, it is expressed as:
Power = work / time
Work and energy has the same unit of measurement i.e joule. Thus, power can also be defined as the rate at which energy is transferred i.e
Power = enery / time
Energy is measured in Joules and time in second. Thus, power can also be defined as amount of joules transfered per second.
Power = Joule / sec
The rate of change of velocity on the other hand is termed acceleration.
Thus, the answer to the question is option C.
Make meaurement and calculation to predict where the puck will land and whether the puck will land on Eintein or not. Upload or decribe all the tep you took to anwer thi. Include the meaurement you made from thi video, the equation you ued and the final reult
In the given case it can be concluded that- The two basic tenets of the special theory of relativity were that observers moving at constant speeds should be subject to the same physical rules and that the speed of light is constant for all observers.
According to Small amounts of mass (m) can be substituted for huge amounts of energy according to the theory, which uses the speed of light to establish the link between energy and matter (E), Einstein's general theory of relativity from 1915, the spacetime curvature is what causes what we experience as the gravitational force.Relativity ushered in the nuclear era while advancing our understanding of elementary particles and their basic interactions in the field of physics. Relativity made it possible for cosmology and astrophysics to predict unusual celestial phenomena like neutron stars, black holes, and gravitational waves.To know more about theory of relativity here
https://brainly.com/question/23896217
#SPJ4
Two negative charges of 42 nC are separated by 46 cm. What is the magnitude of the force acting on each object?
The magnitude of the force acting on each object is equal to 3.87 x 10-8 N.
The magnitude of the force acting on each object can be calculated using Coulomb's law, which states that the electrostatic force (F) between two point objects with charges (q1 and q2) is equal to the product of the electric constant (k) and the product of the charges divided by the square of the distance (r) between them.
Thus, the formula for calculating the force is F = k(q1q2)/r2. In this case, the charges are both -42 nC, and the distance is 0.46 m. The electric constant is 8.99 x 109 Nm2/C2. Thus, the magnitude of the force acting on each object is equal to 3.87 x 10-8 N
Learn more about forces:
https://brainly.com/question/25239010
#SPJ2
The earth completes a circular orbit around the sun in one year. The orbit has a radius of 93,000,000 miles. What is the speed of the earth around the sun in m/s?
Report your result using scientific notation and the correct significant figures.
—x10–m/s
In a year, the earth revolves around the sun once in a circular motion. Therefore, the earth will orbit the sun at a 2.95 m/s speed.
Planets in our solar system did not appear out of thin air. Neither did the sun. They were all a part of a large cloud of gas and dust. Gravity accumulated a lot of material in the center to form the sun. As it spun around the forming sun, the extra matter clashed and gathered together. Some would be capable of attracting more gas and dust, eventually forming planets, because to their powerful gravitational forces.
The answer to the query is
v = 2πR / T
2R equals 6.28 * 9.3 * 107 miles.
T = 24 * 3600 * 365 = 3.15 × 10⁷ sec
v = 9.3 / 3.15 = 2.95 m/s.
Hence, the earth's speed of the earth around the sun will be 2.95 m/s.
To know more about earth on
https://brainly.com/question/27722273
A long string is stretched and its left end is oscillated upward and downward. Two points on the string are labeled A and B. Points A and B are indicated on the string. Orient the two vectors, vA-> and vB-> to correctly represent the direction of the wave velocity at points A and B. rotate the given vectors to indicate the direction of the wave velocity at the indicated points. (Please draw a picture of the end result)
A lengthy string is simple to stretch. The string's two designated spots, A and B, should be at an angle of 90 degrees with the same magnitude, and B should be at an angle of 270 degrees with the same magnitude.
Angle magnitude definition
This is referred to as the amount of rotation that is believed to have been applied to one of the arms' vertex in order to produce a specific position for the other.
It is well known that equal vectors have the same magnitude and direction. When the magnitude and direction of two vectors are the same, they are said to be equal.
|v|=a2+b2 yields the magnitude. Depending on the application, the direction is equal to the angle made with the x-axis or the y-axis.
To learn more about Angle magnitude from given link
https://brainly.com/question/26132809
#SPJ4
A car travels at a constant speed around a circular track whose radius is 3.0 km. The car goes once around the track in 320 s. What is the magnitude of the centripetal acceleration of the car
The magnitude of the centripetal acceleration of the car is 0.0034 km/sec².
What is centripetal acceleration?Centripetal acceleration is the acceleration of an object moving in a circular path. It is directed towards the center of the circle and is responsible for the change in direction of the object's velocity.
The magnitude of the centripetal acceleration of an object moving in a circle is given by the formula:
a = v² / r
where a is the centripetal acceleration, v is the velocity of the object, and r is the radius of the circle.
Given that the car goes once around the track in 320 s, we can calculate its velocity by using the formula:
v = d / t
where d is the distance traveled and t is the time.
d = 2pir = 2pi3.0 km = 18.849 km
t = 320 sec
so the velocity of the car is v = 18.849 km / 320 sec = 0.059 km/sec.
We can now use the formula to find the centripetal acceleration of the car
a = v² / r = (0.059 km/sec)²/ 3.0 km = 0.0034 km/sec²
Hence, the magnitude of the centripetal acceleration of the car is 0.0034 km/sec².
To learn more about centripetal acceleration from the given link:
https://brainly.com/question/14465119
#SPJ4
3. An air bubble of radius r rises steadily through
a liquid of density p at the rate of v. Neglecting
density of air, find the coefficient of viscosity of
liquid.
The coefficient of viscosity of a liquid can be determined from the motion of a bubble rising or falling through the liquid.
What is viscosity?
Viscosity basically is the measure of a fluid's resistance to flow. It is a measure of a fluid's internal friction, which is caused by the attraction of molecules in the fluid. Viscosity is an important physical property of fluids, as it affects the fluid's flow characteristics.
The equation for the coefficient of viscosity is given by:
2/9 r2 ρg/v.
where,
r = radius of bubble
ρ = density of liquid
g = acceleration due to gravity
v = velocity of bubble
Therefore, to calculate the coefficient of viscosity of a liquid, we need to know the radius of the bubble, the density of the liquid, the acceleration due to gravity, and the velocity of the bubble.
Hence, the coefficient of viscosity of liquid is 2/9 r2 ρg/v.
To know more about viscosity,
https://brainly.com/question/2568610
#SPJ4
the effect of a stress raiser is more significant for which of the following types of materials?
a Ductile
b.Gaseous
c Volatile
d. Brittle
Option A is the correct Answer. The effect of a stress raiser is more significant for Ductile materials.
Ductility is the ability of a material to be drawn or plastically deformed without fracture. The ductility of steels varies depending on the types and levels of alloying elements present.
Examples: aluminum, copper, and magnesium alloys.
Uses of Ductile materials:
Ductility is mostly used in metalworking, as materials that crack, break or shatter under stress cannot be manipulated using metal-forming processes such as hammering, rolling, drawing, or extruding.High degrees of ductility occur due to metallic bonds, which are found predominantly in metals; this leads to the common perception that metals are ductile in general.The ductility of steel varies depending on the alloying constituents. Increasing the levels of carbon decreases ductility.To know more about Ductile materials:
https://brainly.com/question/828860
#SPJ4
If the current through a 500 W heater is 4.00 A, what is the potential difference
across the ends of the heating element? *
O 2x10^3 V
8x10^-3 V
25 V
125 V
Answer:
125 V
Explanation:
Given,
Power ( P ) = 500 W
Current ( I ) = 4 A
To fine : -
Potential difference ( V ) = ?
Formula : -
P = V I
V = P / I
= 500 / 4
V = 125 V
Therefore,
the potential difference across the ends of the heating element is 125 V.