Answer:
speed
Explanation:
speed
if five violins sound the same note of 1000Hz, each at the same sound pressure level of 60 dB, what is their total intensity in decibels, compared with the violin alone?
The total sound pressure level of the five violins is 47 dB, which is 13 dB less than the sound pressure level of a single violin at 60 dB.
What is the total intensity?The total intensity of the five violins can be found by summing their individual intensities. The intensity of a sound wave is proportional to the square of the sound pressure level, so we can use the following equation:
I = I0 * 10^(L/10)
where;
I0 is the reference intensity (for sound at the threshold of hearing, I0 = 1e-12 W/m^2), L is the sound pressure level in decibels, and I is the intensity in W/m^2.Since each violin has a sound pressure level of 60 dB, the intensity of each violin can be calculated as follows:
I_violin = I0 * 10^(60/10) = 1e-12 * 1000 = 1e-9 W/m^2
The total intensity of the five violins can then be found by adding the individual intensities:
I_total = 5 * I_violin = 5 * 1e-9 = 5e-9 W/m^2
To find the sound pressure level corresponding to this total intensity, we can use the inverse of the equation above:
L = 10 * log10(I/I0)
L_total = 10 * log10(I_total/I0)
= 10 * log10(5e-9/1e-12)
= 10 * log10(5e3)
= 47 dB
Learn more about intensity of sound here: https://brainly.com/question/17062836
#SPJ1
Please help (50 points and Brainly)
The speed of the basketball is 14.4 m/s if its kinetic energy is 109 J.
What is kinetic energy?Kinetic energy is the energy possessed by an object due to its motion. It is defined as the energy that an object has because of its velocity, and it depends on the mass of the object and its speed. The formula for kinetic energy is [tex]K = 1/2 mv^2,[/tex] where K is kinetic energy, m is the mass of the object, and v is its velocity.
The greater the mass and velocity of an object, the more kinetic energy it has. Kinetic energy is a scalar quantity, meaning that it only has magnitude and no direction. It is an important concept in physics and has many practical applications, such as in sports, transportation, and industrial machinery.
The kinetic energy (K) of an object with mass m and speed v is given by:
[tex]K = 1/2 * m * v^2[/tex]
Rearranging this equation, we can solve for v:
[tex]v = sqrt(2K/m)[/tex]
Plugging in the values given in the problem, we get:
[tex]v = sqrt(2*109 J / 0.145 kg) = 14.4 m/s[/tex]
Therefore, the speed of the basketball is 14.4 m/s if its kinetic energy is 109 J.
Learn more about kinetic energy, here:
https://brainly.com/question/26472013
#SPJ1
NEED HELP ASAP
what is the maximum height achieved by a track star who goes into a long jump at 12m/s at an angle of 20.0 about the horizontal? (hint 12m/s is not the horizontal component of the velocity vector.)
11.76m is the maximum height achieved by a track star who goes into a long jump at 12m/s at an angle of 20.0 about the horizontal
Define projectile motion.
An object or particle that is projected into a gravitational field, such as from the surface of the Earth, and moves along a curved route only under the influence of gravity is said to be experiencing projectile motion.
Most calculations make the assumption that the effects of air resistance are passive and insignificant in the specific instance of Earth projectile motion. Galileo demonstrated that the curved path of objects in projectile motion is a parabola; however, in the unique situation where an object is hurled directly upwards, it may also be a straight line. Such a trajectory is a ballistic trajectory, which is the study of such movements.
v = u + at
a = g = 9.8m/s2
v = 0
u = 12 sin 20
t = 12 sin 20 /9.8 = 0.42 s
s = ut +1/2 at2
s = 12sin20 + 1/2 *9.8*0.42*0.42
s = 10.9 +.864 = 11.76m
To learn more about projectile motion use:
https://brainly.com/question/1912408
#SPJ1
A screw of a certain press has a pitch of 0.20 cm. The diameter of the wheel to which a tangential turning force F is applied is 55 cm. If the efficiency is 40 %, how large must F be to produce a force of 12 kN in the press?
To produce a force of 12 kN in the press, a tangential turning force of 1187500 N (1187.5 kN) must be applied to the wheel.
What is force?Force is an influence that causes a change in the motion, shape, or both of an object. It is the result of an interaction between two objects, and is described through Newton's three laws of motion. These laws explain the relationship between force, mass, and acceleration.
The pitch of the screw is the distance between two adjacent threads on the screw, and is 0.20 cm in this case. The wheel diameter is 55 cm.
To calculate the force needed to produce a force of 12 kN in the press, we use the following equation: F = (12000 N * 55 cm) / (0.20 cm * 0.4).
This equation takes into account the pitch of the screw, the wheel diameter, and the efficiency of the press.
Plugging in the numbers, we get: F = (12000 N * 55 cm) / (0.20 cm * 0.4) = 1187500 N.
To learn more about force
https://brainly.com/question/12785175
#SPJ9
To lift a box 5m in 10s, 250W of power are produced. How much force was applied?
quiero una resolución para acer esto mandame un foto
The displacement of two interfering light waves are y1=4sinwt and y2=3sin(wt+π/2)The amplitude of the resultant wave is a. 5 b. 7 c. 1 d. 0
Answer:
Explanation:
Amplitude of first wave a1=4
Amplitude of second wave a2=3
Angle between two waves =Π/2
Resultant amplitude=[tex]\sqrt{a_{1} ^{2}+a_{2} ^{2} +2a_{1} a_{2} cos\alpha }[/tex]
=[tex]\sqrt{4^{2}+3^{2} +2*4*3*cos90 }[/tex]
=5
Answer is a
Calculate the time required for a 6000-newton net force to stop a 1200-kilogram car initially traveling at 10 meters per second. [Show all work, including the equation and substitution with units.]
Answer:
To solve this problem, we will use the equation for the net force on an object, which is:
net force = mass x acceleration
We can rearrange this equation to solve for acceleration:
acceleration = net force / mass
Once we have the acceleration, we can use the equation for the motion of an object under constant acceleration:
final velocity^2 = initial velocity^2 + 2 x acceleration x distance
We can rearrange this equation to solve for the distance required to stop the car:
distance = initial velocity^2 / (2 x acceleration)
Finally, we can use the equation for average velocity to calculate the time required to travel this distance:
time = distance / average velocity
Substituting the given values into the equations:
net force = 6000 N
mass = 1200 kg
initial velocity = 10 m/s
Using the first equation:
acceleration = net force / mass
acceleration = 6000 N / 1200 kg
acceleration = 5 m/s^2
Using the second equation:
distance = initial velocity^2 / (2 x acceleration)
distance = 10 m/s^2 / (2 x 5 m/s^2)
distance = 10 m
Using the third equation:
average velocity = (initial velocity + final velocity) / 2
final velocity = 0 (since the car is coming to a stop)
average velocity = 10 m/s / 2
average velocity = 5 m/s
Using the fourth equation:
time = distance / average velocity
time = 10 m / 5 m/s
time = 2 seconds
Therefore, the time required for a 6000-newton net force to stop a 1200-kilogram car initially traveling at 10 meters per second is 2 seconds.
How is the water cycle connected to the average temperature of the Earth's
atmosphere and the average temperature of the Earth's oceans? (This
should be in addition to what you just wrote about the Sun)
ITI
Answer:
Through the water cycle, heat is exchanged and temperatures fluctuate. As water evaporates, for example, it absorbs energy and cools the local environment. As water condenses, it releases energy and warms the local environment. The water cycle also influences the physical geography of the Earth.
Infrared observations of a star show that the star is most intense at a wavelength of 800 nm. What is the temperature of the star's surface in K?
The star's surface has a temperature of about 3622.5 K.
What wavelength does a 6000 K star emit the majority of its radiation?In comparison to the same thing at a cooler temperature, hotter objects produce more energy at all wavelengths. Even though the peaks of the 4,000 K object are closer to this wavelength, the 6,000 K object produces more energy at this wavelength than the 4,000 K one.
The Wien's displacement law can be used to calculate the star's surface temperature.
λ_max = b/T
Before applying Wien's law, we must convert the supplied wavelength of 800 nm to metres.
800 nm = 800 × 10⁻⁹ m
When the values are added to the formula, we obtain:
λ_max = b/T
800 × 10⁻⁹ m = (2.898 × 10⁻³ m·K) / T
Solving for T, we get:
T = (2.898 × 10⁻³ m·K) / 800 × 10⁻⁹ m
T = 3622.5 K
To know more about star's surface visit:-
https://brainly.com/question/28812060
#SPJ1
A cyclist starts from rest and coasts down a 4.5 degree hill. The mass of the cyclist plus bicycle is 80 kg. The cyclist has traveled 260 m.
a) What was the net work done by gravity on the cyclist? (in J)
Express your answer using two significant figures.
b) How fast is the cyclist going? Ignore air resistance. (m/s)
Express your answer using two significant figures.
Explain why it is so difficult to ride a bicycle in soft sand.
Soft sand makes it challenging to ride a bicycle since the tires can't generate enough friction. The bicycle struggles to move ahead as a result, and its tires sink.
The danger of ridding a bicycle in soft sandRiding a bicycle on soft sand poses a risk of the vehicle being stuck and challenging to move. Injuries might result if the rider loses balance and falls off the bicycle. The frame, tires, and other parts of the bicycle could also be harmed by the sand.
Furthermore, sand, dirt, wood chips, deep pea gravel, soft grass, and snow all drastically alter your speed. Sand, however, can be the most challenging of all of them because you typically enter the area quickly from grass or another hard surface.
Learn more about bicycle here:
https://brainly.com/question/30683734
#SPJ1
Which weighs more, a liter of ice or a liter of water?
Answer:
Water is denser so a liter of water weighs more than a liter of ice
Observing a set of pith balls with positive charges, how does the distance between the pith balls affect the electric electrical charge?
The electrical force between two charged objects decreases as the distance between them increases. This means that as the distance between two positively charged pith balls increases, the electrical force between them decreases. Therefore, the electrical charge on each pith ball is not affected by the distance between them. The charge on each pith ball will remain the same regardless of the distance between them. However, the electrical force between the pith balls will be weaker at greater distances, and stronger at smaller distances.
Answer:
i'm pretty sure what the other guy means is:
The greater the distance between the pith balls, the lesser the amount of electric charge that exists between them.
Explanation:
"This means that as the distance between two positively charged pith balls increases, the electrical force between them decreases"
Rank the four cases below according to the magnitude of the net electric force on the + q charge. Explain how you determined your ranking.
The order of net coulombic measurement of the amount is (4) > (3) > (1) > (2) .
What kinds of electrostatic charge exist?The Many Kinds of Electric Forces Electromagnetic forces can be divided into two categories: attractive electromagnetic forces and repellent electrical forces. Related crimes repel each other whereas opposite charges attract one another.
(1) Net charge density force on charge q: magnitude = kQq / R2 + 2 kQq cos(theta) / R2
= k Q q ( 1 + 2 cos(theta) ) / R2
(2) Net charge density force on charge q: magnitude = kQq / R2 + 2 kQq cos(theta) / (R/cos(theta))^2
= k Q q ( 1 + 2 cos3(theta) ) / R2
(3) Net charge density force on charge q: magnitude = 3 kQq / R2
(4)Net charge density force on charge q: magnitude= kQq / (R/2)^2 = 4 kQq / R2
To know more about electric force visit:
https://brainly.com/question/2526815
#SPJ1
Baliz help meh
The level of education that a state’s population attains directly impacts the economy. Identify which economic consequence matches which level of education.
well-paying jobs
The economic consequence matches which level of education are :
Well paying jobs - High School diploma or higher Higher tax revenues - High School diploma or higher Increased purchasing power - High School diploma or higher Failure of local businesses - High School dropout or lower More social assistance programs - High School dropout or lower Less tax collected - High School dropout or lower What are the economic consequences of education ?Studies have shown that individuals with a high school diploma or higher tend to have higher incomes and greater access to well-paying jobs, which can lead to increased purchasing power and higher tax revenues for their local communities.
In contrast, individuals who have not completed high school may be more likely to struggle with unemployment or low-paying jobs, which can lead to a greater need for social assistance programs and less tax collected by local governments.
Find out more on economic consequences at https://brainly.com/question/18976235
#SPJ1
What’s the right answer for 2
The little number you see to the right of the symbol for an element is called a subscript. That number indicates the number of atoms of that element present in the compound.
A 5.3-cm -thick layer of oil (n=1.46) is sandwiched between a 1.5-cm -thick sheet of glass and a 2.3-cm -thick sheet of polystyrene plastic (n=1.59). How long (in ns ) does it take light incident perpendicular to the glass to pass through this 9.1- cm -thick sandwich?
Time taken to incident light perpendicular to glass to pass through this 9.1 cm thick sandwich is 0.399 ns.
How long it took to calculate:Being aware of
Layer thickness / light speed equals the amount of time required.
Also,
V is equal to the product of the sound speed and the refractive index.
Now
T1 = 0.05*1.46/3*10^8 = 2.43*10^-10 s
t2 = 0.01*1.5/3*10^8 = 5*10^-11 s
t3 = 0.02*1.59/3*10^8 = 1.06*10^-10 s
So,
Total time is equal to 2.43*10-10, 5*10-11, and 1.06*10-10 s, or 0.399*10-9 s.
= 0.399 ns
Light Speed:When a light beam passes through a certain media, its speed in that medium may be determined using the light speed in vacuum and the medium's refractive index. With the use of the medium's light speed, the value of the amount of time needed to travel a particular distance can be determined.
For more information on light speed kindly visit to
https://brainly.com/question/29216893
#SPJ1
45.0J of work is done on a 1.50kg ball at rest. What is the velocity of the ball?
30.0m/s
5.48m/s
60.0m/s
7.75m/s
Answer:
7.75 m/s.
Explanation:
We can use the work-energy principle to solve this problem. The principle states that the work done on an object is equal to the change in its kinetic energy:
W = ΔK
where W is the work done, ΔK is the change in kinetic energy.
In this case, the work done on the ball is 45.0 J. Since the ball is initially at rest, its initial kinetic energy is zero. Therefore, the change in kinetic energy is:
ΔK = Kf - Ki = 1/2 mv^2 - 0
where Kf is the final kinetic energy, Ki is the initial kinetic energy, m is the mass of the ball, and v is its velocity.
Substituting the given values, we get:
45.0 J = 1/2 (1.50 kg) v^2
Solving for v, we get:
v^2 = (2 x 45.0 J) / (1.50 kg)
v^2 = 60.0
v = √60.0
v ≈ 7.75 m/s
Therefore, the velocity of the ball is approximately 7.75 m/s.
A 0.140 kg baseball is pitched toward home plate at 30.0 m/s. The batter hits the ball back (opposite direction) to the pitcher at 44.0 m/s. Assume that towards home plate is positive. If the ball was in contact with the bat for 0.002 seconds, what is the average force the bat exerts on the ball?
−9700 N
−1000 N
−4700 N
−5200 N
The average force the bat exerts on the ball is -5200 N. This can be calculated using the equation F = Δp/Δt, where F is the average force, Δp is the change in momentum (pf-pi), and Δt is the time interval. In this case, Δp = m * (vf - vi) = 0.14 kg * (44 m/s - 30 m/s) = 5.4 kgm/s, and Δt = 0.002 s. Thus, F = 5.4 kgm/s / 0.002 s = -5200 N.
Question 17 of 25
Which two phrases describe critical thinking skills used in the pursuit of
science?
A. Concluding that one comet is more interesting than another
comet
B. Analyzing observations of a comet's velocity to estimate when it
will pass by the Sun again
OC. Gathering people's opinions about the historical impacts that
comet appearances had on society
D. Evaluating whether research into comets should be funded by the
government
E. Writing detailed descriptions of a comet's appearance as seen
through a telescope
The two phrases that describe the critical thinking skills used in the pursuit of science are options B and E. Analyzing observations of a comet's velocity to estimate when it will pass by the sun again and writing detailed description of comet.
What is critical thinking skill?Critical thinking skills are very important in scientific investigations and data interpretations. Thinking on an observation or scientific backgrounds of a phenomenon and solving complex problems and sorting it eventually leads to the accurate conclusions for the problem.
Here, the estimation of velocity of a comet for its passage around sun will involve critical thinking and use of some theoretical knowledge as well. Gathering of people's opinion or searching history or for fund does nor need any critical thinking.
Making a description of comet through he observation by telescope also need some critical thinking. Therefore, options B and E are correct.
Find more on critical thinking skills:
https://brainly.com/question/17012082
#SPJ1
Find the total equivalent resistance for the circuit. Req = [?] 2 9.0 V 30 Ω www 40 Ω www 50 Ω Enter 20Ω 10Ω
The total equivalent resistance for the circuit is 35.89 Ω
How do i determine the total equivalent resistance?First, we shall determine the equivalence resistance between 30 Ω and 40 Ω. Details below:
Resistor 1 (R₁) = 30 Ω Resistor 2 (R₂) = 40 ΩEquivalent (R) = ?R = (R₁ × R₂) / (R₁ + R₂)
R = (30 × 40) / (30 + 40)
R = 17.14 Ω
Next, we shall determine the equivalence resistance between 20 Ω and 10 Ω. Details below:
Resistor 1 (R₁) = 20 Ω Resistor 2 (R₂) = 10 ΩEquivalent (R) = ?R = R₁ + R₂
R = 20 + 10
R = 30 Ω
Next, we shall determine the equivalence resistance between 50 Ω and the equivalence of 20 Ω and 10 Ω (i.e 30 Ω). Details below:
Resistor 1 (R₁) = 50 Ω Resistor 2 (R₂) = 30 ΩEquivalent (R) = ?R = (R₁ × R₂) / (R₁ + R₂)
R = (50 × 30) / (50 + 30)
R = 18.75 Ω
Finally, we shall determine the total equivalent resistance for the circuit. Details below:
Equivalence resistance between 30 Ω and 40 Ω = 17.14 ΩEquivalence resistance between 50 Ω and the equivalence of 20 Ω and 10 Ω = 18.75 ΩTotal equivalent resistance =?Total equivalent resistance = 17.14 + 18.75
Total equivalent resistance = 35.89 Ω
Learn more about resistance:
https://brainly.com/question/13691672
#SPJ1
A 75.0 kg ladder that is 3.00 m long is placed against a wall at an angle theta. The center of gravity of the ladder is at a point 1.20 m from the base of the ladder. The coefficient of static friction at the base of the ladder is 0.800. There is no friction between the wall and the ladder. What is the vertical force of the ground on the ladder?
The vertical force is given as 735.75 N
How to solve for the vertical forceGiven that there is no friction existing between the wall and the ladder, we would have
w - n = 0
w is the weight of thios ladder
while N is the vertical force that acts on it
n = w
the formula for n = mg
this is mass of ladder * the gravitational constant
= 75.0 kg ladder * 9.81
= 735.75 N
written as substituting the weight of the ladder, W = 75.0 kg * 9.81 m/s^2 = 735.75 N
Therefore the vertical force is givem as 735.75 N
Read more on vertical force herehttps://brainly.com/question/14101425
#SPJ1
Name 3 different ways of reducing the effect of sound waves.
Answer:
There are several basic ways to reduce sound: increasing the distance between source and receiver, decoupling, using noise barriers to reflect or absorb the energy of the sound waves, using damping structures such as sound baffles for absorption, or using active antinoise sound generators.
A general contractor has received plans for a new high-rise hotel in an urban area. The hotel will be 12 stories tall and will have 144 rooms. The contractor is preparing to make a bid on the project. Among the usual specifications for a high-rise building, the plans detail specifications for a friction pile foundation and a glass curtain wall. First, identify the type of construction (residential, commercial, or industrial) and explain why it fits into that category. Next, explain what materials will be needed for each of the specifications in the plan and what workers will be required to install those materials. Finally, identify how carpenters and ironworkers will contribute to the project and what materials they will need to do their jobs.
(WILL GIVE BRAINLIEST IF RIGHT)
Answer:
The type of construction for this project is commercial. This is because the hotel is intended for business purposes, and will generate income for the owners through renting out rooms and other amenities. Commercial construction typically involves larger and more complex projects than residential construction, and often requires specialized expertise in areas such as HVAC, plumbing, and electrical systems.
For the friction pile foundation, materials will include piles, rebar, and concrete. Workers will be required to install the piles and rebar, and pour the concrete to create a stable foundation for the building. Workers may also be required to excavate the site to prepare for the foundation.
For the glass curtain wall, materials will include glass panels, metal framing, and sealant. Workers will be required to install the metal framing and sealant, and then attach the glass panels to create a transparent and aesthetically pleasing exterior for the building.
Carpenters and ironworkers will contribute to the project by installing the structural steel framework for the building, which will support the floors, walls, and roof. Carpenters will also be required to install interior finishes such as doors, trim, and cabinetry. Materials needed for these tasks will include structural steel, wood framing, drywall, and various finishing materials such as paint and flooring. Ironworkers will also be responsible for installing any necessary safety features, such as guardrails or safety nets, to protect workers during construction.
Explanation:
PLEASE HELP ME THIS IS FOR GYM! YOU WILL MAKE MY DAY FOR WHOEVER DOES THIS.
In a three (3) page, double spaced, typed paper, discuss why cardiovascular fitness and flexibility are important factors in maintaining a healthy lifestyle. In this assignment, define cardiovascular fitness and flexibility. Research two (2) cardiovascular fitness activities and explain why these activities are important in maintaining good health. Finally, discuss in detail several flexibility exercises a person should complete before engaging in physical activity.
Cardiovascular fitness and flexibility are both important factors in maintaining a healthy lifestyle because they contribute to overall physical health and well-being.
Why are cardiovascular fitness and flexibility important factors in maintaining a healthy lifestyle?Cardiovascular fitness refers to the ability of the heart, lungs, and circulatory system to deliver oxygen-rich blood to the body's tissues during physical activity. Regular cardiovascular exercise, such as running, swimming, or cycling, can improve heart health, lower blood pressure, reduce the risk of heart disease, and improve overall fitness and endurance.
In combination, cardiovascular fitness and flexibility can provide a foundation for good physical health, allowing individuals to engage in a wide range of physical activities and enjoy an active lifestyle. Regular exercise that includes both cardiovascular fitness and flexibility can also help improve mental health and reduce the risk of chronic diseases, such as obesity, type 2 diabetes, and some forms of cancer. Overall, maintaining good cardiovascular fitness and flexibility is an important part of a healthy lifestyle.
Learn more about cardiovascular fitness :https://brainly.com/question/28044292
#SPJ1
Calculate the speed (in m/s) a spherical raindrop would achieve falling from 2.70 km with air drag. Take the size across of the drop to be 3 mm, the density to be 1.00 ✕ 10^3 kg/m3, and the surface area to be r^2. (Assume the density of air is 1.21 kg/m^3.)
Please, solve as soon as possible.
A spherical raindrop would fall from a height of 2.70 km at a speed of 26.22 m/s due to air resistance.
Calculation-(a) Height from which the raindrop falls, h = 2.70 km = 2700 m
Now,
suppose, m = mass of raindrop
v = speed of raindrop at the ground.
Apply conservation of energy -
1/2 m v^2 = m g h
v = (2 g h)^1/2
= (2 * 9.8 * 2700)^1/2 = 230.0 m/s (Answer)
(b) In the presence of air drag -
Dynamics
m x" = m g - k x'^2
limit speed is
v = (m g / k)^1/2
where
k = 1/2 ρ A C
ρ = air density = 1.21 kg/m^3
A = area = π r^2 = 3.141 * 0.0015^2 = 7.07 x 10^-6 m^2
C = coefficient of hydraulic resistance [0.47 for a sphere]
m = ρ' V = 1.0 x 10^3 x (4/3)*pi*0.0015^3 = 1.41 x 10^-5 kg
k = 1/2*1.21*7.07x10^-6*0.47
= 2.01 x 10^-7 kg/m
Therefore,
v = [(1.41 x 10^-5 x 9.8) / (2.01 x 10^-7)]^1/2
= 26.22 m/s
to know more about the surface area here:
brainly.com/question/29298005
#SPJ1
a professional football player kicks a football eith an initial velociry v= (6.0 m/s) x + (20.0 m/s) y determine how long the football stays in yhe air as well as the horizontal displacement
The horizontal displacement is given by the product of the horizontal component of the initial velocity and the time of flight, so it is 6 m/s x 0.828 s = 4.968 m.
What is initial velocity?Initial velocity is the speed of an object at the start of its motion. It is usually represented by the letter u in equations. Initial velocity is important in determining the final velocity, displacement, and acceleration of an object after a certain amount of time.
The horizontal displacement is simply the product of the horizontal component of the initial velocity, 6 m/s, and the time the ball is in the air. To determine the time the ball stays in the air, we can use the formula for the time of flight of an object under the influence of gravity:
t = 2v sin θ / g
Where t is the time of flight, v is the initial velocity, θ is the angle of the initial velocity vector with respect to the horizontal, and g is the acceleration due to gravity (9.8 m/s2).
In this case, the initial velocity vector is (6.0 m/s) x + (20.0 m/s) y, so the angle is given by the inverse tangent of the ratio of the y-component to the x-component, which is inverse tangent (20.0/6.0) = 77.4°.
Substituting the values into the equation, we get:
t = 2 (6.0 m/s) sin 77.4° / 9.8 m/s2 = 0.828 s
The horizontal displacement is given by the product of the horizontal component of the initial velocity and the time of flight, so it is 6 m/s x 0.828 s = 4.968 m.
To learn more about initial velocity
https://brainly.com/question/28996913
#SPJ1
20 points!!! Emergency help required.
Florence is spinning a 770 g weight tied to a string over her head. The string is 0.94 m long, and the weight is moving with a speed of 4.24 m/s. What is the centripetal force pulling the weight inward?
14.7 N
20.6 N
11.0 N
19.7 N
The centripetal force pulling the weight inward is 19.7 N. The closest option to this value is option (D), 19.7 N.
What is Centripetal Force?
Centripetal force is a force that acts on an object moving in a circular path, directing it toward the center of the circle. In other words, it is the force required to keep an object moving in a circular path, rather than flying off in a straight line. The word "centripetal" comes from the Latin words "centrum", which means "center", and "petere", which means "to seek or aim for".
The centripetal force, which is the force acting on an object moving in a circular path, is given by the formula:
F = m * v^2 / r
where F is the centripetal force, m is the mass of the object, v is its velocity, and r is the radius of the circular path.
In this case, the mass of the weight is 770 g, or 0.77 kg, the velocity is 4.24 m/s, and the radius is 0.94 m.
F = (0.77 kg) * (4.24 m/s)^2 / 0.94 m
F = 19.7 N
Therefore, the centripetal force pulling the weight inward is 19.7 N. The closest option to this value is option (D), 19.7 N.V
Learn more about Centripetal Force from given link
https://brainly.com/question/20905151
#SPJ1
an electric kettle takes 2kw at 240v. Calculate the current and the resistance of the heating element
The power output is given 2000 watt and voltage is 240 v. Then the current through the heating element is 8.3 A and the resistance is 29 ohms.
What is power ?The power used by an object is the rate of its work done or energy. It is the energy divided by time. The power output in a circuit is the product of the potential difference V and current I.
P = I V
Given,
P = 2 kw = 2000 W
v = 240 V.
Then I = P/v
I = 2000 w/240 v = 8.3 A.
According to Ohm's law, voltage v is the product of the current and resistance through the material.
hence,
V = I R
then, R = V/I
R = 240 V/8.33 A
= 29 Ω.
Therefore, the current and resistance through the heating element are 8.3 A and 29 ohms respectively.
Find more on power;
https://brainly.com/question/24110214
#SPJ9
refer to the attachment and answer the question;-;
The electric current is of two types, direct current and alternating current. Direct current do not change its direction and amperage with time whereas alternating current change with time.
What are direct current and alternating current?Direct current (DC) is an electric current which is uni-directional, and so the flow of charge is always in the same direction. As opposed to the alternating current, the direction and amperage of direct currents do not change with time. Direct current is used in many household electronics and in all the devices which use batteries.
Alternating current is an electric current which periodically reverses its direction and change its magnitude continuously with the time in contrast to direct current, which flows only in one direction. The current produced by the generators or turbines is the AC current, as it is the current which is obtained from our home power sockets.
Learn more about Electric current here:
https://brainly.com/question/2264542
#SPJ1