According to the transmission of routing data between routers, dynamic routing is the process of routing network traffic by automatically updating routing tables.
Which dynamic routing protocol updates which dynamic routing table on a regular basis?Dynamic Routing Table: Using one of the dynamic routing protocols, such as RIP, OSPF, or BGP, a dynamic routing table is updated on a regular basis.
Which of the following algorithms, also referred to as dynamic routing algorithms, adjusts routing based on the state of the network?Data packets are transferred from the source to the destination using adaptive routing algorithms, also referred to as dynamic routing methods. Based on network variables like traffic and topology, these algorithms build routing tables.
To know more about routing data visit:-
https://brainly.com/question/29341416
#SPJ1
as you review your network's storage shares to ensure permissions have been securely defined, you come across the following list of users and permissions set to a share on one of your key storage locations. two of the regular users should have read and write permissions (bob barker and jennifer banks). the two other individuals should not (joseph lange and bob marley), who were both given access during a specific project but should've had their write permissions removed afterward. what is it called when permissions are given for a task but then never removed when they are no longer required?
When permissions are given for a task but are not removed when they are no longer required, it is called permission creep.
Permission creep refers to the gradual accumulation of permissions and access rights over time, without a corresponding reduction in permissions when they are no longer necessary.
This can lead to security vulnerabilities, as users who no longer need access to a particular resource or system may still have permissions to access it.
In the case of the storage share mentioned in the question, both Joseph Lange and Bob Marley were given write permissions during a specific project, but those permissions should have been removed afterward. The failure to remove those permissions represents a form of permission creep.
Learn more about permission here:
https://brainly.com/question/29110244
#SPJ11
a ________ network is one that has at least one computer that provides centralized management, resources, and security.
A client-server network is one that has at least one computer that provides centralized management, resources, and security. This model makes it possible to have centralized management, resources, and security. The server is responsible for managing network resources, including access to files, printers, and other services.
A client-server network is a computer network in which some devices on the network, known as clients, receive services from other network devices, known as servers. The server can be a central computer or a group of interconnected computers that share computing power. A client-server network is one type of computer network that allows clients and servers to share resources with one another.
The client-server network model provides a centralized, secure way of managing network resources. The client-server network model is used in many different applications. For example, it is used in business environments to provide employees with access to network resources, such as databases and email. It is also used in educational environments to provide students with access to online resources, such as course materials and learning management systems.
Learn more about the network https://brainly.com/question/15002514
#SPJ11
assume that a program displays two prompts that each accept a value from the user and no data is discarded after each entry. what will happen if the user enters both values separated by a space at the first prompt? a. the program will extract the first value, ignore the second value, and then prompt for another value. b. the program will extract the first value and then prompt for and extract the second value without waiting for the user to enter that value. c. the program will ignore both values and end abnormally. d. the program will extract both values as a single value.
When the user enters both values separated by a space at the first prompt, the program will extract the first value and then prompt for and extract the second value without waiting for the user to enter that value. Therefore, the correct option is b.
This means that the program will read the first value, store it, and then wait for the second value. However, if the program only accepts one value from the user, it will display an error message if the user enters both values at once. In that case, none of the values will be accepted, and the program will prompt the user to enter only one value at a time.
This is because the program accepts one value per prompt, and the values are used in separate operations or functions.
You can learn more about prompts at: brainly.com/question/8998720
#SPJ11
what problems might you encounter when using the web for research? check all that apply. time-consuming searches undocumented sources lack of search tools
When using the web for research, the following problems might arise:
Time-consuming searchesUndocumented sourcesLack of search toolsThese problems arise because of the vastness and the speed at which the web is updated. Despite its many benefits, research on the web is still not the most dependable source of information. Here are a few more points on each problem:
Time-consuming searches: The vastness of the web may make it difficult to find appropriate and pertinent details in a sea of irrelevant data. In addition, the number of search pages returned is often overwhelming, necessitating the use of advanced search methods and filters.
Undocumented sources: While the web provides a wealth of knowledge, the reliability of that information is not always certain. When investigating the origins of a website or an author, it's essential to consider the author's qualifications and the website's credentials.
Lack of search tools: Depending on the quality of search engines, finding relevant data may be difficult. Certain search engines, for example, are better suited for finding academic research, while others are better suited for locating news and cultural information.
Learn more about research: https://brainly.com/question/25257437
#SPJ11
the internetwork layer includes the icmp and tcp protocols of the tcp/ip suite. the internetwork layer includes the icmp and tcp protocols of the tcp/ip suite. true false
Answer: TRUE
Explanation:
malware that records any keys pressed on the keyboard; often used to steal usernames, passwords, and/or financial information is called?
Keystroke logging (or keylogging) is a type of malware that records any keys pressed on the keyboard, often used to steal usernames, passwords, and/or financial information.
This type of malware is usually installed onto a computer or device through malicious emails, websites, or programs. Once installed, keylogging malware is difficult to detect and can steal data from unsuspecting users. Additionally, keylogging malware can remain undetected on a system for a long time, collecting data without being noticed.
To protect yourself against keylogging malware, it is important to have anti-malware installed and kept up-to-date on your devices. Additionally, be sure to only open emails and links from sources you trust, avoid using public or unsecured Wi-Fi networks, and use multi-factor authentication when available.
For such more questions on malware :
brainly.com/question/399317
#SPJ11
which of the following scenarios would typically utilize 802.1x authentication? answer authenticating vpn users through the internet authenticating remote access clients controlling access through a switch controlling access through a router
This is because 802.1x authentication is used for controlling access through a switch or a router. It provides port-based access control and secure key exchange between the client and the network.
This is achieved through a challenge-response authentication mechanism that involves a client, an authenticator, and an authentication server.
In this case, the remote access client is the client, and the switch or router is the authenticator.
The authentication process involves the following steps:
1. The client connects to the switch or router and sends a request to access the network.
2. The switch or router sends a challenge request to the client, which responds with a valid username and password.
3. The switch or router sends the username and password to the authentication server for verification.
4. If the username and password are valid, the authentication server sends a success message to the switch or router, which allows the client to access the network.
5. If the username and password are invalid, the authentication server sends a failure message to the switch or router, which denies the client access to the network.In conclusion, 802.1x authentication is typically used for controlling access through a switch or router, and is commonly used for authenticating remote access clients. It provides secure key exchange and port-based access control, which ensures that only authorized users are granted access to the network.
for more such question on authentication
https://brainly.com/question/28344005
#SPJ11
802.1x authentication is commonly used for controlling network access at the data link layer. This protocol is most typically associated with controlling access through a switch.
Explanation:The protocol 802.1x authentication is typically used for controlling network access at the data link layer. This encompasses Ethernet switches and wireless access points, but it can also incorporate VPNs. However, of the scenarios given, 802.1x authentication is most commonly associated with the option: 'controlling access through a switch'. This is used to prevent unauthorized devices from gaining access to the network. It can also play an important role in authenticating remote access clients and authenticating VPN users through the internet, but the system would generally involve additional security measures for these implementations.
Learn more about 802.1x Authentication here:https://brainly.com/question/32572674
Identify and enlist requirement for given modules of employees management software.
i ) Employee details.
ii ) Employee salary.
[tex] \\ \\ [/tex]
Thanks:)
Don't Spam.
Answer:
### Employee Management Software Requirements
#### I. Employee Details Module
1. **Personal Information:**
- Employee ID (unique identifier)
- First name
- Last name
- Middle name (optional)
- Date of birth
- Gender
- Nationality
- Marital status
- Contact information (email, phone, address)
2. **Job Information:**
- Job title
- Department
- Employment type (full-time, part-time, contract, etc.)
- Employment status (active, inactive, terminated, etc.)
- Hire date
- Termination date (if applicable)
- Reporting manager
- Work location
- Work schedule
3. **Identification Documents:**
- Social Security Number or equivalent national ID
- Passport (optional)
- Driver's license (optional)
- Other government-issued IDs (optional)
4. **Emergency Contacts:**
- Name
- Relationship
- Phone number
- Email address (optional)
- Address (optional)
5. **Employee Profile:**
- Profile picture (optional)
- Biography (optional)
- Skills and competencies
- Certifications and licenses
- Education background
6. **Performance Management:**
- Performance reviews
- Goals and objectives
- Promotion and demotion history
- Awards and recognitions
7. **Access Control:**
- User roles and permissions
#### II. Employee Salary Module
1. **Pay Information:**
- Salary structure (base salary, bonuses, allowances, etc.)
- Pay frequency (monthly, bi-weekly, weekly, etc.)
- Currency
- Pay grade or level
- Pay scale (if applicable)
- Overtime policy
2. **Deductions:**
- Tax withholdings
- Social security contributions
- Health insurance premiums
- Retirement plan contributions (e.g., 401k, pension)
- Other deductions (e.g., union dues, garnishments)
3. **Benefits:**
- Health insurance
- Dental insurance
- Vision insurance
- Life insurance
- Disability insurance
- Retirement plans
- Stock options or equity grants
- Employee assistance programs
- Flexible spending accounts
- Paid time off (PTO) and leave policies
4. **Payroll Processing:**
- Payroll schedule
- Direct deposit information
- Paycheck distribution method (e.g., direct deposit, paper check)
- Pay stubs and pay history
5. **Salary Administration:**
- Salary adjustments (merit increases, cost-of-living adjustments, etc.)
- Compensation benchmarking and analysis
- Salary bands or ranges
6. **Compliance and Reporting:**
- Wage and hour law compliance
- Tax reporting and filing
- Payroll audits
- Payroll recordkeeping requirements
What is the difference between semantic segmentation and object detection?
Semantic segmentation and object detection are two computer vision techniques used for image analysis. The difference between them is in the level of granularity of the analysis. In contrast, semantic segmentation divides the image into a grid of predefined classes and can provide more detailed information about the objects in the image.
Semantic segmentation is a process of dividing an image into different segments, with each segment representing a distinct object or region of the image. In other words, it is a pixel-wise classification of an image, where every pixel is assigned a label that describes the object it belongs to.
Object detection, on the other hand, is the process of identifying and localizing specific objects within an image. Object detection algorithms detect the presence of an object in an image and draw a bounding box around it to indicate its location. This allows for multiple objects to be detected in a single image. In summary, while semantic segmentation deals with pixel-wise classification of an image, object detection is focused on detecting and localizing specific objects within an image.
Learn more about semantic segmentation https://brainly.com/question/28454998
#SPJ11
g create the following sql script (save as w6 firstname lastname.sql) . create a simple database with the following 1) create insert script (10 inserts) 2) create update script (10 updates) 3) create the following:- a) select all records b) select all records sorted descending , ascending c) select all records with condition (where) d) count all records e) count all record with condition 4) create 3 delete scripts
It is also important to use proper grammar and spelling to ensure that the answer is easy to understand for the student.In order to create the SQL script as requested in the student question, the following steps should be taken:
1. Create a new database using the following syntax:CREATE DATABASE database_name;
2. Create a table using the following syntax:CREATE TABLE table_name (column_name1 data_type, column_name2 data_type, ...);
3. Insert data into the table using the following syntax:INSERT INTO table_name (column1, column2, ...) VALUES (value1, value2, ...);
4. Update data in the table using the following syntax:UPDATE table_name SET column_name = new_value WHERE condition;
5. Select all records from the table using the following syntax:SELECT * FROM table_name;
6. Sort all records in ascending or descending order using the following syntax:SELECT * FROM table_name ORDER BY column_name ASC/DESC;
7. Select records with a condition using the following syntax:SELECT * FROM table_name WHERE condition;
8. Count all records in the table using the following syntax:SELECT COUNT(*) FROM table_name;
9. Count records with a condition using the following syntax:SELECT COUNT(*) FROM table_name WHERE condition;10. Delete records from the table using the following syntax:DELETE FROM table_name WHERE condition;
10.The student should create 10 insert scripts, 10 update scripts, and 3 delete scripts using the above syntax. These scripts should be saved as a .sql file with the name "w6 first name last name.sql".
for more such question on syntax
https://brainly.com/question/831003
#SPJ11
data in a ring topology network: i. is checked by all computers up until taken by the appropriate computer. ii. flows in many directions. iii. can skip over broken computers in the network. iv. messages flow in one direction only.
A ring topology network data: i. is checked by all computers up until taken by the appropriate computer. The correct option is (i) only.
What is a ring topology?A ring topology is a type of network topology in which each network device is connected to two other devices, forming a circular chain that is closed.
Each network device is either a computer, a network switch, or a network hub. The ring topology allows for communication between network devices.In a ring topology network, data flows in only one direction. As a result, the data is checked by all computers until it reaches the appropriate computer.
Furthermore, a ring topology network has the ability to bypass broken computers in the network, and messages flow in both directions.
The following are the characteristics of a ring topology network:
It is a circular loop structure that links all devices to each other.All data travels in one direction only.In a ring network, a signal or token moves from one device to the next until it reaches its destination.A signal or token moves in a clockwise or counterclockwise direction.There is no limit to the number of devices that can be linked to a ring network.Learn more about ring topology at
https://brainly.com/question/30471059
#SPJ11
A user logs on to a laptop and opens her email. What device will provide emails to the laptop?
robert's about to start creating an html5 asset for his app campaign. according to html5 asset best practices, what should be included before the html5 ad plays?
According to HTML5 asset best practices, a pre-loader should be included before the HTML5 ad plays.
A pre-loader is a graphical representation that is displayed while a website or an application is loading. Pre-loaders make it appear as though the site is being loaded quickly while the remaining components are loaded. A pre-loader is also referred to as a loading animation or a loading bar, among other names.In conclusion, before an HTML5 ad plays, it is best practice to include a pre-loader. The markup language HTML5 is used to organize and show material on the Internet. It is the fifth and last significant HTML version, according to the World Wide Web Consortium (W3C).
Learn more about HTML5: https://brainly.com/question/28994257
#SPJ11
4. 11. 4 Snake Eyes code HS
I cant see to get this right, ant help would be appreciated
It would be helpful if you could provide more context or details about what you are trying to do with your Snake Eyes code in order to provide specific assistance.This code defines two functions: roll_dice() which rolls two dice and returns their values, and snake_eyes() which repeatedly calls roll_dice() until a pair of ones is rolled.
However, assuming you are referring to a basic game of rolling two dice and trying to get a "snake eyes" (rolling a pair of ones), here is some example code in Python:
def roll_dice():
die1 = random.randint(1, 6)
die2 = random.randint(1, 6)
return die1, die2
def snake_eyes():
rolls = 0
while True:
die1, die2 = roll_dice()
rolls += 1
print("Rolling the dice...")
print("Die 1:", die1)
print("Die 2:", die2)
if die1 == 1 and die2 == 1:
print("Snake Eyes! It took", rolls, "rolls to get snake eyes.")
break
snake_eyes()
The number of rolls it takes to get snake eyes is then printed to the console.Again, without more specific information about your code or what you are having trouble with, it is difficult to provide more targeted assistance.
To learn more about code click the link below:
brainly.com/question/30427047
#SPJ4
you are using a new lcd monitor and notice that the icons and images look distorted or elongated. what video setting can you use to fix this problem?
When using a new LCD monitor, you notice that the icons and visuals appear stretched or deformed. You can resolve this issue by changing the video's resolution.
What is an LCD monitor?An LCD (Liquid Crystal Display) is a kind of flat panel display that operates primarily with liquid crystals. Given that they are frequently utilized in cellphones, televisions, computer monitors, instrument panels, and other products, LEDs offer a wide range of applications for consumers and organizations.An LED display typically has an advantage over a conventional monitor because of its superior picture quality, longer lifespan, slimmer design, quick response time, and more environmentally friendly construction. These benefits balance out the initial price tag that may have you selecting an LCD alternative because of its greater initial cost. It is the major eye-related drawback of LCD/LEDs.To learn more about LCD monitors, refer to:
https://brainly.com/question/30524317
2. the kl25z permits resolution modes of 8-, 10-, 12-, and 16-bits. what is the minimum measurable voltage step for 16-bit resolution mode?
The student question, the KL25Z is a microcontroller from NXP Semiconductors that is capable of operating at up to 48 MHz. It features a 32-bit ARM Cortex-M0+ CPU core and is designed to be low-power and cost-effective.
The KL25Z allows for resolution modes of 8-, 10-, 12-, and 16-bits, with the minimum measurable voltage step for 16-bit resolution mode being determined by the reference voltage of the analog-to-digital converter (ADC).The ADC on the KL25Z uses a successive approximation register (SAR) architecture and can be configured for single-ended or differential measurements. The reference voltage for the ADC can be set to one of several options, including 1.2 V, 2.5 V, or an external voltage. When using the 16-bit resolution mode, the minimum measurable voltage step is equal to the reference voltage divided by the maximum possible value of the ADC output code. For example, if the reference voltage is set to 2.5 V and the ADC is configured for 16-bit resolution, the maximum possible value of the ADC output code is 65535. Therefore, the minimum measurable voltage step would be 2.5 V / 65535 = 0.0000381 V, or approximately 38 µV.for more such question on voltage
https://brainly.com/question/1176850
#SPJ11
a disadvantage of segmented memory allocation is . a. internal fragmentation b. the number of page faults c. external fragmentation d. the physical size requirements of main memory
A disadvantage of segmented memory allocation is external fragmentation.
The process of dividing the memory space of a computer system into several portions is known as segmented memory allocation. It's called "segmentation". The number of memory partitions that can be generated is determined by the computer system's capacity. Memory segments, once they've been allocated, are referred to as memory blocks.
A pointer variable is needed to point to the start address of each memory block. When segmentation is used to allocate memory, memory block sizes are varied. When a block of memory is allocated and there is room in the block, memory is kept. External fragmentation can occur as a result of this. External fragmentation is a phenomenon in which a computer system's memory becomes dispersed and unmanageable. In segmented memory allocation, external fragmentation occurs.
Learn more about segmented memory allocation at https://brainly.com/question/28524802
#SPJ11
When it’s time to move out, your landlord inspects the property and claims you have damaged the apartment. She is keeping your security deposit. Will the renters insurance cover this loss?
Until you vacate, your landlord retains this money. The landlord has the right to withhold the security deposit if you mistreat the property or fail to pay rent.
I need to know how to get my security deposit refunded.At the conclusion of your tenancy, you must speak with your landlord and request your security deposit. You must speak with the letting agency in place if your home is under their management. When requesting a refund of your deposit, it is recommended to write or email.
What percentage of the security deposit is there?A security deposit of 10% of the total bill amount is withheld from the contractor's invoice and released when the defect liability period has passed.
To know more about security deposit visit:-
https://brainly.com/question/29825161
#SPJ1
regardless of the device being used, software typically falls into four basic categories of software: commercial software, shareware, freeware, and . a. public domain software b. advertising software c. licensed software d. executable software
Regardless of the device being used, software typically falls into four basic categories of software: commercial software, shareware, freeware, and public domain software. Option A is the correct answer.
Software is a collection of instructions, data, or programs that tell the computer how to execute a specific task. The software provides users with a wide range of options, including creating, editing, sharing, and storing files. With the assistance of software, computers can perform a variety of tasks.
The four basic categories of software are: Commercial software Shareware Freeware Public domain software. The correct option is a) public domain software.
You can learn more about public domain software at
https://brainly.com/question/30030437
#SPJ11
Two programmers wrote very similar code. compare the two to decide what the difference will be between them. programmer a programmer b def drawunknown(): x = 20 pendown() forward(x) penup() def drawunknown(): x = 50 pendown() forward(x) penup() programmer a draws a shorter line than programmer b. programmer a draws a circle, while programmer b draws a square. programmer a draws a longer line than programmer b. programmer a draws an h, while programmer b draws an e.
The correct answer is a. Programmer A draws a shorter line than Programmer B.
The code in both programs is almost identical, with only the value of the variable x being different. In Programmer A's code, x is assigned the value of 20, while in Programmer B's code, x is assigned the value of 50. Since both programs call the same functions to draw a line, the length of the line drawn will be determined by the value assigned to x. Therefore, Programmer B's line will be longer than Programmer A's line, as the value assigned to x is greater. This shows how even small differences in code can lead to significant differences in the output.
To know more about Programmer click here:
brainly.com/question/17293834
#SPJ4
write the matlab command to truncate only the value of p(15) to an integer number of animals and immediately display the answer. do not include any spaces in your answer (blackboard is grading this problem).
Answer: Assuming that p is a variable representing the number of animals, the MATLAB command to truncate only the value of p(15) to an integer and immediately display the answer can be written as follows:
Explanation:
less
Copy code
fprintf('%d',fix(p(15)));
The fix function is used to round the value of p(15) towards zero, which effectively truncates the decimal part of the number. The fprintf function is used to display the result as an integer. The '%d' argument specifies that the output should be an integer.
SPJ11
a) Input the value of length and breadth. find the area of rectangle. b) input the number and check whether it is even or odd.
5) 5
5 5
5 5 5
5 5 5 5
5 5 5 5 5 (urgent need. thank you!)
a) To find the area of a rectangle, we need to multiply its length and breadth. Let's say the length and breadth are given as L and B respectively. Then, the area (A) can be calculated as:
A = L x B
For example, if the length and breadth are 7 and 5 respectively, then:
A = 7 x 5
A = 35
Therefore, the area of the rectangle is 35.
b) To check whether a number is even or odd, we need to divide it by 2. If the remainder is 0, then the number is even, otherwise, it is odd.
Let's say the number we want to check is N. Then, we can use the modulo operator (%) to find the remainder when N is divided by 2. If the remainder is 0, then the number is even, otherwise, it is odd.
For example, if the number is 7, then:
7 % 2 = 1
Since the remainder is 1, the number is odd.
Now, let's check whether each of the given numbers is even or odd:
5 is odd
5 5 is not a valid number
5 5 5 is not a valid number
5 5 5 5 is not a valid number
5 5 5 5 5 is not a valid number
Therefore, the only valid number in the list is 5, which is odd.
which one is not necessarily included in the flow of customer-related databases? define the database functions populate the database maintain the database clean the database before doing anything quzi
The option that is not necessarily included in the flow of customer-related databases is clean the database before doing anything. The correct option is clean the database before doing anything.
Database functions refer to the features and activities that a database management system (DBMS) provides to enable users to manage data in a database efficiently. A database's primary function is to store data, and it is the most important aspect of a database.
Customer-related databases are used to store a large amount of customer data for businesses, which can be used for analysis and customer service.
The following activities are included in the flow of customer-related databases:
Populate the databaseMaintain the databaseClean the database before doing anything. (This option is not necessarily included in the flow of customer-related database).Which one is not necessarily included in the flow of customer-related databases?
A. Define the database functions.
B. Populate the database.
C. Clean the database before doing anything.
D. Maintain the database.
Learn more about the database brainly.com/question/30652371
#SPJ11
a computer's default gateway setting is the mac address of a router on a remote network. a computer's default gateway setting is the mac address of a router on a remote network. true false
The given statement "A computer's default gateway setting is not the MAC address of a router on a remote network" is False because a computer's default gateway setting is the IP address of a router or networking device within the local network, not the MAC address of a router on a remote network.
Instead, the default gateway is the IP address of a router or networking device within the local network, which serves as the primary point of access to other networks, including the internet. The default gateway acts as an intermediary between the local network and external networks, facilitating the flow of data between them. The MAC (Media Access Control) address, on the other hand, is a unique identifier assigned to a specific networking device or interface, such as a router or network card.
MAC addresses are typically used to identify devices within a local network for data communication purposes. While the MAC address can be used to locate devices within a local network, it is not used as the default gateway setting. The default gateway setting must be an IP address, as it serves as the reference point for devices within the network when they need to communicate with external networks.
Know more about MAC (Media Access Control) here:
https://brainly.com/question/30757512
#SPJ11
I will pay $50. 00 to the person who help me with this by Wednesday January 13,2021.
I have to complete the remainder of unit 2 of CMU CS academy and I need to finish 2. 2. 1, 2. 2. 2, 2. 2. 3,2. 2. 4,2. 2. 5, 2. 2. 6 2. 3 properties and 2. 4 unit 2 exercises and 2. 5 unit 2 creative tasks
This section covers the use of loops in programming. You'll learn about different types of loops and how to use them to repeat a set of instructions.how to approach completing the remainder of Unit 2 in CMU CS Academy.Start by reviewing the material covered in the sections you need to complete.
Make sure you understand the concepts and ideas presented in each section before moving on to the next one.Complete the exercises and creative tasks for each section. These will help you apply what you have learned and reinforce your understanding of the material.If you get stuck or need help, reach out to your instructor or classmates for assistance. They may be able to offer insights or suggestions that can help you overcome any obstacles you encounter.Manage your time effectively to ensure that you are able to complete all of the required work by the deadline. Break the work down into smaller, manageable tasks, and set aside dedicated time each day to work on them.Remember that the purpose of completing this coursework is to learn and develop your skills, so approach it with a positive attitude and a willingness to put in the effort needed to succeed.
To learn more about CMU CS click on the link below:
brainly.com/question/30994802
#SPJ4
the us postal service can serve as an analogy for internet transport protocols. the postal service offers various services: first class letter: the default service with no extras. certified mail: sent using the standard route but provides the sender with proof that the letter was delivered. registered mail: sent using secure mechanisms along the way (e.g. locked cages). similarly, there are multiple transport protocols that can be used on top of ip, with tcp and udp being the most popular. which analogy between the transport protocols and usps services makes the most sense?
The most accurate analogy between transport protocols and USPS services is TCP to certified mail and UDP to first-class letter.
How to determine analogyHere, multiple transport protocols can be used on top of IP, with TCP and UDP being the most popular.
TCP and UDP transport protocols can be compared to the US postal service's first-class letter and certified mail services. TCP, like certified mail, provides the sender with proof of delivery.
When using TCP, the sender can be sure that the packet was delivered successfully to the receiver.UDP, on the other hand, is similar to a first-class letter as it does not provide any delivery assurance.
Just as a first-class letter can be lost in the mail or not delivered, so too can UDP packets be lost or not delivered.
Learn more about transport protocol at
https://brainly.com/question/31147384
#SPJ11
a user can't make an rdp connection from outside the network to a server inside the network. which network device will a network administrator most likely configure to allow this connection?
A network administrator would most likely configure a firewall to allow RDP connection from outside the network to a server inside the network.
What is an RDP? Remote Desktop Protocol (RDP) is a Microsoft protocol that allows users to remotely access and manage a Windows desktop or server. RDP allows you to take control of your computer's desktop from another device or computer across the Internet.The solution to the problem stated in the question is that a user cannot make an RDP connection from outside the network to a server inside the network because a network administrator has not enabled the port required for RDP in the firewall.
To allow RDP from outside the network to a server inside the network, a network administrator would most likely configure a firewall. A firewall is an essential component of any network, as it is responsible for filtering network traffic between two networks. The network administrator can open a port on the firewall to allow remote desktop traffic through. This would enable the user to connect to the server from outside the network using RDP.
Learn more about RDP connection at: brainly.com/question/29763665
#SPJ11
based on the agile methodology that you have selected, research and share resources that help define one of the software phases. how do those resources help define that phase for capratek?
Based on the Scrum Agile methodology, a resource that helps define one of the software phases is the "Scrum Guide" by Ken Schwaber and Jeff Sutherland. This resource helps define the "Sprint" phase for Capratek.
To understand how the Scrum Guide defines the Sprint phase for Capratek, follow these steps:
1. Access the Scrum Guide: Visit the official Scrum Guide website to access the document, which is available for free.
2. Understand the Sprint concept: The Sprint is a time-boxed period (usually 2-4 weeks) during which a development team works on a specific set of tasks to create a potentially shippable product increment. The goal is to produce a working piece of software that can be reviewed, tested, and refined during subsequent Sprints.
3. Apply the Sprint phase to Capratek: Using the Scrum Guide as a reference, Capratek can define their Sprint phase by setting a fixed duration for their Sprints (e.g., 2 weeks), selecting a set of tasks from the Product Backlog, and committing to completing them within the Sprint timeframe. The team will then work collaboratively to achieve the Sprint goal and produce a working software increment.
4. Use Scrum events and artifacts: To manage the Sprint phase effectively, Capratek should utilize Scrum events such as Sprint Planning, Daily Scrum, Sprint Review, and Sprint Retrospective. Additionally, artifacts like the Product Backlog, Sprint Backlog, and Increment will help Capratek track progress, identify areas for improvement, and ensure a transparent development process.
By following the guidance provided in the Scrum Guide, Capratek can effectively define and implement the Sprint phase within their Agile software development process.
You can learn more about Agile methodology at: brainly.com/question/30837537
#SPJ11
websites are hosted on a server and each of these servers has its own unique ip address. what does the 'ip' stand for?
The IP address is a unique numerical identifier assigned to each device that connects to the internet or a computer network.
The primary function of IP addresses is to enable devices to communicate with each other by sending and receiving data packets. The IP address serves as a unique identifier, allowing data to be sent to and from the correct devices.There are two types of IP addresses: IPv4 and IPv6. IPv4 addresses are the most commonly used, and they consist of 32-bit numbers separated into four blocks. IPv6 addresses, on the other hand, are composed of 128-bit numbers and are less common.IP addresses are vital in the operation of the internet and computer networks. Without IP addresses, devices would be unable to communicate with one another. When a user types a URL into their web browser, the browser sends a request to the appropriate server's IP address, requesting that the server send the web page back to the user. This process allows users to access the millions of websites hosted on the internet today.for such more question on Protocol
https://brainly.com/question/28811877
#SPJ11
greenland is the world's largest island, located east of canada. it's connected to the rest of the world's internet via underwater fiber cables. the following table shows the percentage of greenland residents using the internet for the years 2012-2017: year % internet usage 2012 64.90 64.9064, point, 90 2013 65.80 65.8065, point, 80 2014 66.70 66.7066, point, 70 2015 67.60 67.6067, point, 60 2016 68.50 68.5068, point, 50 2017 69.48 69.4869, point, 48 source: international telecommunications union assuming the internet usage keeps growing at a similar rate, what is the most reasonable prediction for internet usage in 2019 (two years after the last data point)? choose 1 answer: choose 1 answer: (choice a) 70.4 % 70.4p, point, 4, percent a 70.4 % 70.4p, point, 4, percent (choice b) 74.1 % 74.1t, point, 1, percent b 74.1 % 74.1t, point, 1, percent (choice c) 71.4 % 71.4q, point, 4, percent c 71.4 % 71.4q, point, 4, percent (choice d) 70.1 % 70.1p, point, 1, percent d 70.1 % 70.1%
The most reasonable prediction for internet usage in 2019 of Greenland as the world's largest island would be 71.4%. The correct answer is C.
To make a reasonable prediction for internet usage in 2019, we can calculate the average growth rate from the given data and then apply that rate for the next two years.
Calculate the average growth rate between each consecutive year:
(65.80-64.90) + (66.70-65.80) + (67.60-66.70) + (68.50-67.60) + (69.48-68.50)= 0.90 + 0.90 + 0.90 + 0.90 + 0.98 = 4.58Divide the total growth by the number of years to find the average annual growth rate:
4.58 / 5 = 0.916Apply the average annual growth rate to the last data point (2017) for the next two years (2018 and 2019):
69.48 + 0.916 + 0.916 = 71.312Round the result to one decimal place: 71.3%. The closest answer among the given choices is (Choice C) 71.4%.
Learn more about internet usage at brainly.com/question/30756833
#SPJ11