which factor has more impact on the strength of an acid, the polarity of the bond or the length of the bond

When a transition metal complex absorbs visible light, the color that results from the electronic (d) transition between d orbitals.

The d-block elements that are found in Groups 3–12 of the periodic table are known as transition metals.

They are known as transition metals because they possess characteristics that are typical of both metals and nonmetals, as well as properties that are unique to themselves.

A complex is a substance in which a central metal atom is bound to one or more ligands by covalent bonds.

The ligands are ions or molecules that have an unshared pair of electrons that they donate to the metal. The donor atoms in the ligands form a coordination compound with the central atom.

In the transition metal complexes, the colors that we observe are due to electronic transitions from d-d transitions of metal ions.

The color of transition metal complexes is caused by electronic transitions between d orbitals. This occurs when a transition metal complex absorbs visible light.

To know more about periodic table, refer here:

https://brainly.com/question/11155928#

#SPJ11

oxymercuration-demercuration of 2-methyl-2-butene gives the product 2-methyl-2-butanol.

Oxymercuration-demercuration is the process involving electrophilic activation of an alkene by a mercuric acetate group. It is followed by the  addition of water firstly and secondly, reductive demercuration by sodium borohydride.

In the first step, an electrophilic HgOAc+ ion is added to the double bond which gives a mercurinium ion .

In the second step, the species reacts with a nucleophilic water molecule. Due to this nucleophilic attack, there forms a bonding of an HgOAc group and a OH group on the adjacent carbon atoms.

The final product involves Markovnikov addition reaction where the OH group is bonded to the more substituted carbon atom of the alkene.

To know more about Oxymercuration-demercuration here

https://brainly.com/question/30829890

#SPJ4

Answer: Soil

Explanation:

Based on the electronegativities of 2.1 for H and 2.5 for I, we can predict that HI (hydrogen iodide) would be expected to be a polar covalent molecule, with the iodine atom having a partial negative charge (δ-) and the hydrogen atom having a partial positive charge (δ+).

This is because electronegativity is the measure of an atom's ability to attract shared electrons in covalent bond. In the HI molecule, the iodine atom has a higher electronegativity than the hydrogen atom, which means it has a greater ability to attract the shared electrons in the covalent bond toward itself.

As a result, the electrons in the HI molecule will be more strongly attracted to the iodine atom, causing the iodine atom to have a partial negative charge and the hydrogen atom to have a partial positive charge.

To know more about electronegativities here

https://brainly.com/question/14031645

#SPJ4

The reaction between Sulfuric Acid and Sodium Hydroxide forms Water and Sodium Sulphate. Therefore option (1) is the correct answer.

Neutralisation is a chemical reaction where an acid and a base react with each other quantitatively. It is also written as Neutralisation. The acid strength of the reactant gives the pH of the neutralised solution.

Ever experienced a burning sensation in your stomach after eating too much spicy food? This is due to the formation of acid in the stomach. This problem can be cured by the consumption of an antacid which neutralizes the effect of acid, and this reaction is called a neutralisation reaction.

Visit here to learn more about the Neutralisation: https://brainly.com/question/3645180

#SPJ4

The mass of magnesium chloride produced is 179.15 grams.

The balanced chemical equation for the reaction is:

Mg(s) + 2HCl(aq) → MgCl₂(aq) + H₂(g)

From the equation, we can see that 1 mol of Mg reacts with 2 mol of HCl to produce 1 mol of MgCl₂ and 1 mol of H₂.

So, to determine the limiting reactant, we need to calculate the moles of MgCl₂ that can be formed from each reactant:

Moles of MgCl₂ from Mg = 3.79 mol Mg × (1 mol MgCl₂/1 mol Mg) = 3.79 mol MgCl₂

Moles of MgCl₂ from HCl = 3.75 mol HCl × (1 mol MgCl₂/2 mol HCl) = 1.88 mol MgCl₂

Since the amount of MgCl₂ that can be formed is limited by the amount of HCl available, HCl is the limiting reactant.

The stoichiometry of the reaction tells us that 2 moles of HCl react to produce 1 mole of MgCl₂. Therefore, the number of moles of MgCl₂ produced in the reaction is:

1.88 mol MgCl2

Finally, we can use the molar mass of MgCl2 to calculate the mass produced:

Molar mass of MgCl₂ = 95.211 g/mol

Mass of MgCl₂ produced = 1.88 mol × 95.211 g/mol = 179.15 g.

Learn more about magnesium chloride here:

https://brainly.com/question/30671024

#SPJ1

Answer:

The volume of the gas at a pressure of 15.33 psi is 3.28 liters.

Explanation:

To solve this problem, we need to use the combined gas law, which relates the pressure, volume, and temperature of a gas:P1V1/T1 = P2V2/T2where P1, V1, and T1 are the initial pressure, volume, and temperature, respectively, and P2, V2, and T2 are the final pressure, volume, and temperature, respectively.We can rearrange this equation to solve for V2:V2 = (P1V1T2)/(P2T1)Let's plug in the values given in the problem:P1 = 1.00 atm

V1 = 3.60 L

T1 = 25.0 C + 273.15 = 298.15 K

P2 = 15.33 psi

T2 = 25.0 C + 273.15 = 298.15 KWe need to convert the pressure to the same units as P1, which is atm:1 psi = 0.068046 atm

15.33 psi = 15.33 x 0.068046 atm = 1.044 atmNow we can calculate V2:V2 = (P1V1T2)/(P2T1)

V2 = (1.00 atm x 3.60 L x 298.15 K)/(1.044 atm x 298.15 K)

V2 = 3.28 L

To determine the number of grams in one mole of ZnCl2, we need to calculate its molar mass first. Zn has an atomic mass of 65 and Cl has an atomic mass of 35.5.

Since there are two Cl atoms in ZnCl2, we multiply the atomic mass of Cl by 2 to get 71.

Thus, the molar mass of ZnCl2 is:

Molar mass = Atomic mass of Zn + Atomic mass of Cl x 2

Molar mass = 65 + (35.5 x 2)

Molar mass = 136

Therefore, there are 136 grams in one mole of ZnCl2.

To know more about atomic mass, visit:

https://brainly.com/question/17067547

#SPJ1

This equation shows that when hydrochloric acid (HCl) reacts with calcium hydroxide (Ca(OH)2), calcium chloride (CaCl2) and water (H2O) are produced.

Therefore, the H2O component in the reaction can be described as 2 molecules of water (2H2O), as shown in the balanced equation. Option A, "2 molecules H2O", is the correct way to describe the H2O component in the reaction.

2HCl(aq) + Ca(OH)₂ (aq) ⇒ A. 2 molecules H₂O B.

Option B, "1 molecule H2O", is incorrect as two molecules of water are produced in the reaction, not one.

Option C, "2 LH2O", is also incorrect as the symbol "L" is not used to represent water molecules in chemical equations.

Option D, "4 moles H2" is also incorrect as hydrogen gas (H2) is not produced in this reaction.

To know more about calcium hydroxide , visit:

https://brainly.com/question/9584549

#SPJ1

To determine the volume ratio of NH4Cl and NH3 solutions required to make a buffer of a specific pH, we need to use the Henderson-Hasselbalch equation:

pH = pKa + log([A-]/[HA])

where:

pH = the desired pH of the buffer

pKa = the dissociation constant of the weak acid component of the buffer

[A-] = the concentration of the conjugate base (NH3) of the weak acid in the buffer

[HA] = the concentration of the weak acid component (NH4Cl) in the buffer

The pKa of NH4Cl is 9.25, so we can use this value in the Henderson-Hasselbalch equation. Let's assume that we want to make a buffer with a pH of 9.0.

At the pH of 9.0, we can calculate the ratio of [A-]/[HA] using the following equation:

[A-]/[HA] = 10^(pH - pKa)

[A-]/[HA] = 10^(9.0 - 9.25) = 0.562

Therefore, we need to mix the NH4Cl and NH3 solutions in a ratio of 0.562:1 to make a buffer with a pH of 9.0. This means that for every 0.562 units of NH3, we need 1 unit of NH4Cl to make the buffer.

To know more about component click here

brainly.com/question/17547547

#SPJ4

The pH of a solution can be calculated from the concentration of hydroxide ions using the formula pH = -log[H+]. In this case, the pH of the solution with an [OH-] concentration of 3.94e⁻⁵ M is approximately 9.6.

The concentration of hydroxide ions [OH-] in the solution is 3.94e⁻⁵ M.

The pH of a solution can be calculated using the formula:

pH = -log[H+]

where [H+] is the concentration of hydrogen ions in the solution. To find [H+], we can use the fact that in any aqueous solution at room temperature,

[H+][OH-] = 1.0 × 10⁻¹⁴

Rearranging this equation to solve for [H+], we get:

[H+] = 1.0 × 10⁻¹⁴ / [OH-]

Substituting the given value for [OH-], we get:

[H+] = 1.0 × 10⁻¹⁴ / 3.94e⁻⁵

[H+] = 2.54 × 10⁻¹⁰ M

Now we can use this value to calculate the pH:

pH = -log[H+]

pH = -log(2.54 × 10⁻¹⁰)

pH = 9.595

Therefore, the pH of the solution is approximately 9.6.

To know more about pH please refer: https://brainly.com/question/3050345

#SPJ1

Four different elements can form bonds with a carbon atom. So, HCCH equals CH. The triple bond is always the shortest bond length, followed by the double bond, and the single bond is the longest. HCCH (ethyne) compound has the shortest carbon-carbon bond length.

As bond order increases, bond length decreases. The distance separating the two nuclei that are joined together is known as the bond length. It varies according to hybridization, the quantity and kind of bonds, and the size of the atoms.

Since the length of a bond is inversely proportional to its strength, triple bonds, which are the strongest bonds, also have the shortest bond lengths. A triple bond length is shortened by the extra electrons' stronger attractive attractions on the nuclei. Bond lengths are listed in decreasing order: single bond ≥ double bond ≥ triple bond.

Learn more about Bond length, here:

https://brainly.com/question/24227967

#SPJ4

Answer:

If you dey Naija I get one thing for you

Explanation:

Just Dey Play na the thing wey I wan give you

(I) 5.30 × [tex]10^{-9}[/tex]The Ksp value for iron (II) oxalate is 5.30 × [tex]10^{-9}[/tex]

This is because iron (II) oxalate dissociates in water to form Fe2+ and oxalate ions, and then the solubility product constant (Ksp) can be calculated using the concentration of Fe2+ ions in a saturated solution of iron (II) oxalate. The solubility product constant (Ksp) expression for iron (II) oxalate is given by the equation below;FeC2O4 (s) → Fe2+ (aq) + C2O42- (aq)Ksp = [Fe2+][C2O42-]To calculate Ksp, the concentration of the dissociated ions (Fe2+ and C2O42-) in a saturated solution of FeC2O4 must be known. We know that the concentration of Fe2+ ions in a saturated solution of iron (II) oxalate is 5.47 x [tex]10^{-4}[/tex]  M. Thus, substituting this value into the Ksp expression, we have;Ksp = [Fe2+][C2O42-] = (5.47 × [tex]10^{-4}[/tex] )(2 × 5.47 × [tex]10^{-4}[/tex] )Ksp = 5.30 × [tex]10^{-9}[/tex] .Therefore, the Ksp value for iron (II) oxalate is 5.30 × [tex]10^{-9}[/tex].

To know more about Ksp click here:

brainly.com/question/29492726

#SPJ11

Boyle's Law-

[tex]\:\:\:\:\:\:\:\:\:\:\:\star\:\sf \underline{ P_1 \: V_1=P_2 \: V_2}\\[/tex]

(Pressure is inversely proportional to the volume)

Where-

As per question, we are given that -

Now that we have all the required values and we are asked to find out the final volume, so we can put the values and solve for the final volume -

[tex]\:\:\:\:\:\:\:\:\:\:\:\:\:\:\:\star\:\sf \underline{ P_1 \: V_1=P_2 \: V_2}[/tex]

[tex]\:\:\:\: \:\:\:\:\:\:\longrightarrow \sf 30 \times 14.3= 54\times V_2\\[/tex]

[tex] \:\:\:\:\:\:\:\:\:\:\longrightarrow \sf V_2 = \dfrac{30 \times 14.3 }{54}\\[/tex]

[tex] \:\:\:\:\:\:\:\:\:\:\longrightarrow \sf V_2 = \cancel{\dfrac{ 429}{54}}\\[/tex]

[tex]\:\:\:\: \:\:\:\:\:\:\longrightarrow \sf V_2 =7.944..........\\[/tex]

[tex] \:\:\:\:\:\:\:\:\:\:\longrightarrow \sf \underline{V_2 = 7.94 \:L }\\[/tex]

Therefore, the volume will become 7.94 L when the pressure is increased to 54 atm.

13473 calories of heat were added to 449.1 g of water to raise its temperature from 25 degrees C to 55 degrees C.

To calculate the heat added to water, we can use the following formula:

Q = m * c * ΔT

Q = heat added (in calories)

m = mass of water (in grams)

c = specific heat of water (1 calorie/gram degree Celsius)

ΔT = change in temperature (in degrees Celsius)

Using the given values:

m = 449.1 g

ΔT = (55 - 25) = 30 degrees C

Substituting these values into the formula, we get:

Q = 449.1 g * 1 cal/g °C * 30°C

Q = 13473 calories

Calories are a unit of measurement for energy. They are used to quantify the amount of energy in food and the amount of energy that our bodies burn through physical activity. One calorie is defined as the amount of energy required to raise the temperature of one gram of water by one degree Celsius

Learn more about calories here:

https://brainly.com/question/22374134

#SPJ1

The answer is (B) The city must ensure that they are aware of the effects on animals. They will have the knowledge they need from the study to balance the project's advantages and disadvantages.

By removing trees from the forest, birds, reptiles, and insects lose their habitats and food supplies, which results in a fall in the number of wild creatures. Small mammals, a source of food for mid- and large-sized mammals, will be impacted by this. The extinction of species is the result of a chain reaction.

Soil erosion increases as a result of deforestation. The loss of crops and fertile land is just one of the devasting repercussions of soil erosion on the environment.

To learn more about deforestation visit:

brainly.com/question/11697527

#SPJ1

a. 2.0 miles downhill

This is because the path taken by the camper appears to go primarily downhill and is relatively short in distance. However, the actual distance may be more or less than 2.0 miles depending on the scale of the diagram.

Answer:

Ah, I love Bill Nye the Science Guy! That video is a classic. Here are 10 things to take away from it: 1. Matter is anything that has mass and takes up space. 2. There are three phases of matter: solid, liquid, and gas. 3. In a solid, the particles are tightly packed together and vibrate in place. 4. In a liquid, the particles are farther apart and can move around each other. 5. In a gas, the particles are spread out and move freely. 6. Sublimation is when a solid turns directly into a gas, without becoming a liquid first. 7. Deposition is when a gas turns directly into a solid, without becoming a liquid first. 8. Plasma is another phase of matter that occurs at very high temperatures and consists of charged particles. 9. Bose-Einstein condensate is a fifth

The correct answer is B) The particles absorb heat and spread farther apart.

When a liquid evaporates, the particles at the surface of the liquid gain enough energy (usually in the form of heat) to overcome the attractive forces between them and escape into the air as a gas. This energy breaks the intermolecular bonds between the liquid particles and allows them to move more freely.

The absorption of heat causes an increase in the kinetic energy of the particles, which makes them move faster and collide with each other more frequently. These collisions help to break the intermolecular bonds between the liquid particles.

As more and more particles escape from the surface of the liquid, the concentration of the liquid decreases, and eventually, the liquid can completely evaporate into a gas. The escaped particles also carry away some of the energy from the liquid, which is why the evaporation process cools down the remaining liquid and its surroundings.

Learn more about evaporates here:

https://brainly.com/question/11845221

#SPJ1

Answer:

I'm sorry, but it's not correct to say that nitric acid (HNO3) reacts with aqueous potassium rubidium sulfide to form hydrogen sulfide gas.

Potassium rubidium sulfide is not a known compound. Potassium sulfide and rubidium sulfide are two different compounds, and they have different chemical formulas and properties. Also, neither of them reacts with nitric acid to form hydrogen sulfide gas.

If you have any other chemistry questions, I'd be happy to help!

Explanation:

Lithium (Li), Sodium (Na), Potassium (K), Rubidium (Rb), Cesium (Cs), and Francium (Fr) are in the same column in the periodic table because they all belong to the alkali metal group (Group 1) and have similar chemical properties.

This is due to each of these elements having one electron in their outermost energy level (valence electron). As elements in the same column share the same number of valence electrons, they exhibit similar reactivity and bonding patterns.

The elements in this group share several chemical properties, which is why they are all placed in the same column in the periodic table.

The alkali metals are all very reactive, meaning they have a tendency to react with other elements to form compounds. They are also all soft metals, meaning they can be easily cut or shaped. In terms of their physical properties, alkali metals have low melting and boiling points and are good conductors of heat and electricity.

In terms of their electronic configuration, the alkali metals all have one valence electron. This means that they all have similar chemical properties. For example, they are all very reactive with halogens such as chlorine and fluorine, and they all react with water to form hydrogen gas and an alkali metal hydroxide.

to know more about alkali metal refer here:

https://brainly.com/question/18153051#

#SPJ11

Answer:

The volume of the tank can be calculated using the ideal gas law, which states that PV = nRT, where P is pressure, V is volume, n is the number of moles of gas, R is the ideal gas constant, and T is temperature.

In this case, we have P = 179 atm, n = 7.75 moles, R = 0.08206 Latm/(Kmol), and T = 295 K. Plugging these values into the ideal gas law equation and solving for V gives us:

V = (nRT)/P V = (7.75 moles * 0.08206 Latm/(Kmol) * 295 K) / (179 atm) V ≈ 1.01 L

So the volume of this tank at these conditions is approximately 1.01 liters.

Explanation:

Answer:

Volume = 1.05 L (3 s.f.)

Explanation:

To find the volume of the tank, we can use the ideal gas law.

[tex]\boxed{\sf PV=nRT}[/tex]

where:

The given values are:

Substitute the given values into the formula and solve for V:

[tex]\implies \sf 179 \cdot V=7.75 \cdot 0.082057366080960\cdot 295[/tex]

[tex]\implies \sf V=\dfrac{7.75 \cdot 0.082057366080960\cdot 295}{179}[/tex]

[tex]\implies \sf V=\dfrac{187.6036532 \dots }{179}[/tex]

[tex]\implies \sf V=1.04806510 \dots\;L[/tex]

[tex]\implies \sf V=1.05\;L\;(3\;s.f.)[/tex]

Therefore, the volume of the tank in these conditions is 1.05 liters (3 s.f.).

Answer:

19.56160744 g F2 = 19.6 grams F2

Explanation:

Molar mass of F2: 2(19.00)=38.00 g/mol

Atoms --avogadro's number--> moles --molar mass--> grams

To calculate concentration we use -

[tex] \:\:\:\:\:\:\:\:\:\:\:\star\longrightarrow \sf \underline{C=\dfrac{n}{V}}\\[/tex]

[tex] \:\:\:\:\:\:\:\:\:\:\:\star\longrightarrow \sf \underline{n = C\:V}\\[/tex]

Where -

We are given the volume and the concentration of the KOH. Using those information, we can calculate the moles of KOH.

Given data:-

Volume of KOH, V= 27.4mL = 27.4×10⁻³ L

[tex]\star[/tex]Concentration of KOH, C= 1 M

[tex] \:\:\:\:\:\:\longrightarrow \sf Moles \:of \:KOH = C\:V\\[/tex] 

[tex] \:\:\:\:\:\:\longrightarrow \sf Moles \:of \:KOH = 1\times 27.4 ×10⁻³\\[/tex] 

[tex] \:\:\:\:\:\:\longrightarrow \sf Moles \: of \: KOH = 0.0274  \\[/tex]

The neutralization reaction is expressed as:-

[tex] \star\longrightarrow \sf\underline{ \pink{2KOH} + \pink{H_2SO_4} = K_2SO_4 + 2H_2O}\\[/tex]

According to this reaction, 2 moles of KOH reacted with 1 mole of H₂SO₄.Therefore, 0.0274 mole of KOH would also react with (0.0274/2)=0.0137 mole of H₂SO₄.

[tex] \:\:\:\:\:\:\longrightarrow \sf Concentration\: of\: H₂SO₄ =\dfrac {Moles\:of\:H₂SO₄}{ Volume \: of \: H₂SO₄}\\[/tex]

[tex] \:\:\:\:\:\:\longrightarrow \sf Concentration\: of\: H₂SO₄ =\dfrac {0.0137}{ 25×10⁻³  }\\[/tex]

[tex] \pink{\because\sf \underline{ Volume\: of \: H₂SO₄= 25 mL = 25×10⁻³ L}}\\[/tex]

[tex] \:\:\:\:\:\:\longrightarrow \sf Concentration\: of\: H₂SO₄ =\dfrac {0.0137}{ 0.025 }\\[/tex]

[tex] \:\:\:\:\:\:\longrightarrow \sf \underline{Concentration\: of\: H₂SO₄ = 0.548\: M}\\[/tex]

Therefore, the concentration of H₂SO₄ is 0.548M.

The solubility product constant expression for copper(II) oxalate is:

CuC₂O₄(s) ⇌ Cu²⁺(aq) + C₂O₄²⁻(aq)

The Ksp value given is 2.9 x 10⁻⁸ at 25°C.

Let's assume that "x" is the molar solubility of C₂O₄²⁻   in water, then the equilibrium concentrations of Cu²⁺ and C₂O₄²⁻ ions are also "x" because 1 mol of C₂O₄²⁻ produces 1 mol of Cu²⁺ and 1 mol of C₂O₄²⁻

So, it can be written as:

Ksp = [Cu²⁺ ][C₂O₄²⁻ ] = x²

Substituting the given Ksp value, we get:

2.9 x 10⁻⁸ = x²

Taking the square root of both sides gives:

x = 1.7 x 10⁻⁴ M

Therefore, the solubility of copper(II) oxalate at 25°C is 1.7 x 10⁻⁴ moles/litre, rounded to two decimal places.

Learn more about copper(II) oxalate, here:

https://brainly.com/question/15225438

#SPJ4

To determine the actual pH of a solution with an unknown pH, a good choice of indicator would be a universal indicator.

A universal indicator is a mixture of several different pH-sensitive dyes that change color over a wide pH range, typically from 1 to 14.

This allows for more precise pH determination than single indicators, which are usually limited to a smaller pH range. Here are the steps to use a universal indicator:

1. Obtain a small sample of the unknown solution.

2. Add a few drops of the universal indicator to the solution.

3. Observe the color change in the solution.

4. Compare the color with the provided pH color chart that comes with the universal indicator.

5. Determine the pH value of the solution based on the color observed. Using a universal indicator will allow you to accurately determine the actual pH of the unknown solution.

To know more about universal indicator, refer here:

https://brainly.com/question/26797119#
#SPJ11

The concentration of reactants and products no longer change at equilibrium. The given statement is true.

Equilibrium in chemicals happens dynamically. Even after equilibrium has been achieved, the forward and reverse reactions still take place. The relative concentrations of reactants and products do not vary for a reaction that is at equilibrium, though, because the rates of the reactions are the same.

All reactions tend to reach a state of chemical equilibrium, or the time when the forward and backward processes are both happening at the same rate. The forward and reverse speeds are equal, which means that at equilibrium, the concentrations of the reactants and products are constant. Equilibrium in chemicals happens dynamically. Even after equilibrium has been achieved, the forward and reverse reactions still take place. Yet because the reaction rates are equivalent.

To know more about equilibrium

https://brainly.com/question/30807709

#SPJ4

Option A). The solution that could be classified as a buffer is 0.100 M HNO₂ and 0.100 M NaNO₂.

A buffer solution is one that resists changes in pH when small amounts of an acid or a base are added. A buffer consists of a weak acid and its conjugate base or a weak base and its conjugate acid. Among the given options, the buffer solution can be identified by following this criterion.
Option 1: 0.100 M HNO₂  and 0.100 M  NaNO₂.
Here, HNO₂  is a weak acid and NaNO₂ is its conjugate base (NO2-). This pair can act as a buffer.
Option 2: 0.100 M HCl and 0.100 M NH₄Cl
HCl is a strong acid and doesn't form a buffer with its conjugate base.
Option 3: 0.100 M HCl and 0.100 M NaOH
HCl and NaOH are strong acid and strong base, respectively. They don't form a buffer solution.
Option 4: 0.100 M HBr and 0.100 M KBr
HBr is a strong acid and doesn't form a buffer with its conjugate base.

For more such questions on buffer solution

brainly.com/question/8676275

#SPJ11

Nitrogen gas will effuse about 2.16 times faster than xenon gas under these conditions.

The rate of effusion of a gas will be inversely proportional to square root of its molar mass. This is known as Graham's law of effusion. Mathematically, we will express this relationship as:

rate of effusion ∝ 1/√(molar mass)

Let's assume that the temperature and pressure of the gases are kept constant. The molar mass of nitrogen gas (N₂) is 28 g/mol, and the molar mass of xenon gas (Xe) is 131 g/mol. Therefore, the ratio of their molar masses will be;

molar mass of Xe / molar mass of N₂ = 131 g/mol / 28 g/mol = 4.68

According to Graham's law of effusion, the ratio of their effusion rates is the inverse of the ratio of their square roots of their molar masses. This can be expressed as;

rate of effusion of N₂ / rate of effusion of Xe = √(molar mass of Xe) / √(molar mass of N₂) = √4.68 = 2.16

Therefore, 2.16 times faster will the nitrogen effuse.

To know more about rate of effusion here

https://brainly.com/question/12221871

#SPJ4