Which can lead scientists to change a theory that has already been accepted? Check all that apply.

changes to scientific laws
new experimental methods
new hypotheses
technological inventions
repetitions of old experiments

Which Can Lead Scientists To Change A Theory That Has Already Been Accepted? Check All That Apply.changes

Answers

Answer 1

Answer:

B, C, and D

Explanation:


Related Questions

How many laws of motion are there? (Newton's) 3 4 2 1

Answers

Answer:

There is three laws of motion by newton

Explanation:

ultraviolet light destroys which vitamin essential for cell division?

Answers

Answer:

Both Vitamin D and folate level are affected by UV radiation from sunlight.

Explanation:

what is the smallest possible value for the index of refraction?

Answers

Answer:

1.0

Explanation:

The smallest possible value for the index of refraction is 1.0.

What is Index of refraction?

This talks about how fast light travels through an object by taking note of how much the light is bent, or refracted, as it enters into the material.

The smallest possible value for the index of refraction is 1.0 because the speed of light in any medium is always less than than the speed of light in air or vacuum.

Read more about Refraction here https://brainly.com/question/24319677

it is important to realize that an element’s line spectrum can include emissions at wavelengths throughout the electromagnetic spectrum including ultraviolet, visible, and infrared. according to the procedure in section 2, where will you be collecting data on hydrogen and helium’s line spectra?

Answers

Answer:

visible region

Explanation:

According to the procedure in section 2, in visible region the data collected on hydrogen and helium’s line spectra.

What is electromagnetic spectrum?

Electromagnetic spectrum are the wave which is form of energy and includes the waves such as radio waves, gamma waves, visible light waves etc.

An element’s line spectrum can include emissions at wavelengths throughout the electromagnetic spectrum including ultraviolet, visible, and infrared.

Types of electromagnetic spectrum-

Radio waves-Radio waves are used to broadcast the signal and television signals.Microwaves-Microwaves are used in the mobile signals, Radar and in cooing the food.Infrared-Infrared transmit heat from difference sourced of fire.Visible light-This is the type of electromagnetic radiation, which is visible to the human eye.Ultraviolet-Ultraviolet electromagnetic radiation used in florescent tubes.X-rays- X-rays are used to see throughout the objects and the bodies.Gamma rays- Used in medical, to kill the cell causes cancer.

The hydrogen line spectra fall between wavelength, 410 nm to 656 nm. The helium line spectra fall between wavelength, 400 nm to 781 nm.This two fall in the visible region of line spectra.

According to the procedure in section 2, in visible region the data collected on hydrogen and helium’s line spectra.

Learn more about the electromagnetic radiation here

https://brainly.com/question/15946945

A fisherman notices that wave crests pass the bow of his anchored boat every 3.0 s. He measures the distance between two crests to be 7.0 m. How fast are the waves traveling?

Answers

Answer:

The time period is

T

=

3.0

s

.

The distance between two crests is

λ

=

8.0

m

.

The frequency of wave can be calculated as,

f

=

1

T

f

=

1

3.0

s

f

=

1

3

s

1

The speed of wave can be calculated as,

v

=

f

λ

v

=

(

1

3

s

1

)

(

8

m

)

v

=

2.67

m

/

s

Find the efficiency of a machine that does 800J of work if the input work is 2,000J

Answers

Answer:

Efficiency: 0.4 (40%)

Explanation:

The efficiency of a simple machine is given by the ratio

n = w¹/w²

where

w² is the input work of the machine

w¹ is the output work of the machine

For the machine in this problem, we have:

w¹ = 800j is the output work

w² = 2000j is the input work

Therefore, the efficiency of the machine is

n = 800/2000 = 0.4

Which can be also written as percentage:

n = 0.4 × 100 = 40%

hope it helps you

what is the relationship between electric field lines and equipotential surfaces?

Answers

An equipotential surface is a three-dimensional version of equipotential lines. * *Equipotential lines are always perpendicular to electric field lines* . The process by which a conductor can be fixed at zero volts by connecting it to the earth with a good conductor is called grounding.

a matieral through which charges can flow through easily is known as what?

Answers

Answer:

the answer would be an electrical conductor

Exercise will not help maintain the health of your endocrine system.
A.
True

B.
False

Answers

A. True

Hope this helps :)

You throw an orange out a widow at a height of 12 meters upwards at an angle of 32 to the horizontal with an initial velocity of 3.5m/s.How long will the orange be in flight before it hits the ground? Round the answer to the nearest tenth.__ Seconds

Answers

Answer:

3 meters

Explanation:

add up dum boi

A motorboat accelerates uniformly from a velocity of 10.5 m/s to the west to a velocity of 6.5 m/s to the west. If its acceleration was 4.5 m/s2 to the east, how far did it travel during the acceleration

Answers

Answer:

7.4m ............................

which contains the particles that are vibrating fastest?

Answers

Answer:

Boiling water

Explanation:

what supports a white dwarf against the crush of gravity?

Answers

Answer:  In particular, electron degeneracy pressure is what supports white dwarfs against gravitational collapse, and the Chandrasekhar limit (the maximum mass a white dwarf can attain) arises naturally due to the physics of electron degeneracy.

Explanation:

Degeneracy pressure keeps a white dwarf from collapsing under its own gravity.

What is Degeneracy pressure?

Electron degeneracy pressure is a particular manifestation of the more general phenomenon of quantum degeneracy pressure.

The maximum mass that a white dwarf can support against collapse is 1.4 solar masses due to the Chandrasekhar limit.

To learn more about White dwarf here

https://brainly.com/question/2624737?

#SPJ2

Below is a diagram of a weight on a spring. When the weight is pulled down and then released, the spring compresses and expands. Each position indicates a different point in time.

Which of the following statements is true?
a
In all four positions, mechanical energy is 0 J.
b
The elastic potential energy of the spring at Position 2 is converted to kinetic energy.
c
The chemical potential energy of the spring is greatest at Position 4.
d
In all four positions, the gravitational potential energy of the spring is the same.

Answers

Answer:

B.

Explanation:

The elastic potential energy of the spriy at position 2 is converted to kinetic energy.

The elastic potential energy of the spring at Position 2 is converted to kinetic energy. Option (B) is correct.

What is potential energy?

The energy held within an object is known as potential energy. There are several different types of potential energy, including gravitational potential energy, elastic potential energy, and electric potential energy.

Here, the energy that an object possesses as a result of its position in relation to other objects is referred to as its gravitational potential energy.

Elastic potential energy is the energy that an object possesses as a result of the stresses that exist inside its body.

At  Position 2, the elastic potential energy of the spring is converted to kinetic energy.

Learn more about potential energy here:

https://brainly.com/question/24284560

#SPJ2

Which of the following forces exists between objects even in the absence of direct physical contact


A. Contact force
B. Field force
C. Fundamental

Answers

Answer:

B. Field Force

Explanation:

Answer:

The Answer is (B) Your welcome!

hi can someone please answer the number 2 question i really need it thank you ❤️​

Answers

#Batangas

[tex]\\ \tt\longmapsto d=\dfrac{49.07}{8}\times 100[/tex]

[tex]\\ \tt\longmapsto d=6.13(100)[/tex]

[tex]\\ \tt\longmapsto d=613km[/tex]

#Puerto Princesa

[tex]\\ \tt\longmapsto d=\dfrac{58.10}{8}\times 100[/tex]

[tex]\\ \tt\longmapsto d=7.26(100)[/tex]

[tex]\\ \tt\longmapsto d=726km[/tex]

#Davao

[tex]\\ \tt\longmapsto d=\dfrac{39.47}{8}\times 100[/tex]

[tex]\\ \tt\longmapsto d=4.93(100)=493km[/tex]

NEED HELP!!! IF YOU ANSWER ALL QUESTIONS I WILL GIVE YOU BRAINEST!!!!! 15 POINTS!!!!

1. Marina comes from a family with a lot of heart disease. She knows that she will have to go out of her way to make sure that her heart stays strong and healthy. What would be the BEST exercise to achieve this goal?
A.
yoga
B.
bowling
C.
swimming
D.
weightlifting

2. Alicia’s coach thinks that she should try some interval training so that she can get some anaerobic activity. Which of these would be BEST for Alicia to add to her routine?
A.
biking with occasional sprints
B.
meditation several times a day
C.
taking stairs instead of escalators
D.
running at a steady pace for miles

3. You should be very ambitious when setting personal goals for health.
A.
True
B.
False

4. Imagine that you are going to make an exercise routine. If your goal was to develop your health rather than one specific improvement, what should be in your plan?
A.
a focus on the benefits of stretching
B.
a variety of aerobic and anaerobic exercises
C.
a single exercise with increasing intensity
D.
an exercise that you have never tried before

PLEASE NO LINKS

Answers

Answer:

1) C.

swimming

2) A.

biking with occasional sprints

3) A.

True

4) B.

a variety of aerobic and anaerobic exercises

Explanation:

A boy exerts an unknown horizontal force as he pulls a 52 N sled across packed snow. The coefficient of friction is 0.12. If a person weighing 650 N sits on the sled, what force is needed to pull the sled across the snow at constant speed?

Answers

Answer:

0.62

Explanation:

Ff = mg = 52 N

Since the speed is constant, the friction

force equals the force exerted by the

girl, 36 N.

Ff = ukFn

so uK = Ff/Fn

= 36 N/52 N

= 0.69

Force is needed to pull the sled across the snow at constant speed is 0.62 N

What is force?

A force in physics is an effect that has the power to alter an object's motion. An object with mass can change its velocity, or accelerate, as a result of a force. An obvious way to describe force is as a push or a pull. A force is a vector quantity since it has both magnitude and direction.

Given in the question a boy exerts an unknown horizontal force as he pulls a 52 N sled across packed snow. The coefficient of friction is 0.12. If a person weighing 650 N sits on the sled,

Ff = mg = 52 N

Since the speed is constant, the friction force equals the force exerted by the boy, 36 N.

Ff = (uk).(Fn)

so uK = Ff/Fn

= 36 N/52 N

= 0.69 N

Force is needed to pull the sled across the snow at constant speed is 0.62 N

To learn more about force refer to the link:

brainly.com/question/13191643

#SPJ2

is the right answer c?

Answers

Answer:

Yea I believe so

Explanation:

HOW WOULD SOUND REFLECT

Answers

Answer:

Reflection. If a sound is not absorbed or transmitted when it strikes a surface, it will be reflected. ... Reflection of a sound wave at a barrier, as if from an imaginary source at an equal distance behind the barrier. Sound reflection gives rise to DIFFUSION, REVERBERATION and ECHO.

Answer:

by a echo

Explanation:

if u are I a sound proof room you shout to the wall the echo will then reflect

5) Find the length of guitar string that would vibrate at a fundamental frequency of 825 Hz if the string is stretched so that the velocity of waves on the string is 580 m/s? ​

Answers

Áp dụng công thức tính độ dài ạ

A) half as much
B) as much
C) two times as much
D) three times as much

Answers

Answer:

3 times as much

Explanation:

half as much would be 12%, as much would be 24%, and two times as much would be 48%.

3 times as much is 72, which is about 74%

Công thức tính quãng đường đi được của chuyển động thẳng biến đổi đều là:

Answers

At time t = 0 the velocity is v1. Therefore C1 = v1 and C2 = x1. Equations (1), (2), (3), and (4) fully describe the motion of particles, or bodies experiencing rectilinear (straight-line) motion, where acceleration a is constant.

which of the following is a selectively permeable membrane?

a) nulcer membrane
b) plasma membrane
c) cell wall
d)none of these​

Answers

Answer:

B

Explanation:

The plasma membrane is a selectively premeable membrane that chooses what goes in and out of the cell. The cell wall is for support and the nuclear membrane decides what goes in and out of the nucleus

Answer:

Plasma membrane

Explanation:

The plasma membrane consists of a lipid bilayer that is semipermeable.The plasma membrane regulates the transport of materials entering and exiting the cell.So, it is selectively permeable membrane.

A car, travelling at a speed of 30 m/s in a straight line, brakes and decelerates at a uniform rate of 2 m/s2. How much further does it travel before coming to rest?

Answers

Answer:

You are finding acceleration, so it would be 15 m/s2

Explanation:

30 divided by 2

Please Help with Acceleration graphs

Answers

Negative velocity indicates direction so on number 6 part a is moving away from starting point (positive velocity) and part c is moving toward/back to starting point (negative velocity)

what is the prefix of 10^10



PLEASE BE FAST :)

Answers

Answer: 100
10*10= 100
Is this right?? I hope it is cause I am in high school

Chauncy is driving down the hill that descends at an angle a 4.5° below horizontal. After driving 4.60 kilometers along the road, how much elevation has chauncy lost?

Answers

Answer:

360 m

Explanation:

Explanation is given in the attached image below.

Sonar is a device that uses reflected sound waves to measure underwater depths. If a sonar signal has a frequency of 288 Hz and the speed of sound in water is 1450 m/s, what is the wavelength of the sonar signal?

Answers

5.03M That’s the correct answer :)

at a certain distance from a point charge the electric potential is 200V and electric field is 200V/m, what is this distance
a. 10m
b. 8m
c. 0.1m
d. 0.8m

Answers

c. 0.1m hope this helped

Explanation:

0.1 m

i dont know how to explain but i know the ans so ............byee ...

Other Questions
what is the answer to the question A line passes through the points (0,5) and (3,6). What is its equation in slope-interceptform?Write your answer using integers, proper fractions, and improper fractions in simplest form. Maria was playing basket.she made 25 baskets.5 of the baskets were 3-pointers.The rest were 2-pointers.how many points did she score If the unemployment rate is low what happens to prices of goods and services. Do they increase, decrease, or stay the same? Explain your reasoning. Blanca is considering selling her blossoming art business, but is unsure what fair value would be. A friend in accounting told her she could help if she can calculate her EBIT. She has sold 120 art collages for $300. Her expenses are minimal since she usually uses recycled materials. She estimates it costs her about $4 per collage and she has created 200 collages this year. Help her calculate her EBIT. Annual Revenue Annual Expenses, and EBIT Moon Company produces baseball bats and cricket paddles. It has two departments that process all products Cutting Department and Finishing Department.In Finishing Department, direct materials (DM) are added at the start of the process and conversion costs (CC) are added evenly during the process. Company is using Weighted Average method for the Finishing Department.During July, beginning work in process in the Finishing Department was 80% complete as to conversion. Beginning inventories included $30,800 for transferred-in costs, $13,200 for direct materials, and $27,500 for conversion costs. Ending inventory was 30% complete as to CC. Additional information about the Finishing Department follows:FinishingBeginning work-in-process units26,400Units transferred in this period74,800Units completed & transferred out79,200Ending work-in-process units22,000Material costs added$37,400Conversion costs$75,460Transferred-in costs$141,240What is equivalent units for transferred-in cost, direct materials, and conversion cost, respectively? Separate with slash /.Moon Company produces baseball bats and cricket paddles. It has two departments that process all products Cutting Department and Finishing Department.In Finishing Department, direct materials (DM) are added at the start of the process and conversion costs (CC) are added evenly during the process. Company is using Weighted Average method for the Finishing Department.During July, beginning work in process in the Finishing Department was 80% complete as to conversion. Beginning inventories included $30,800 for transferred-in costs, $13,200 for direct materials, and $27,500 for conversion costs. Ending inventory was 30% complete as to CC. Additional information about the Finishing Department follows:FinishingBeginning work-in-process units26,400Units transferred in this period74,800Units completed & transferred out79,200Ending work-in-process units22,000Material costs added$37,400Conversion costs$75,460Transferred-in costs$141,240What is equivalent units for transferred-in cost, direct materials, and conversion cost, respectively? Separate with slash /.Moon Company produces baseball bats and cricket paddles. It has two departments that process all products Cutting Department and Finishing Department.In Finishing Department, direct materials (DM) are added at the start of the process and conversion costs (CC) are added evenly during the process. Company is using Weighted Average method for the Finishing Department.During July, beginning work in process in the Finishing Department was 80% complete as to conversion. Beginning inventories included $30,800 for transferred-in costs, $13,200 for direct materials, and $27,500 for conversion costs. Ending inventory was 30% complete as to CC. Additional information about the Finishing Department follows:FinishingBeginning work-in-process units26,400Units transferred in this period74,800Units completed & transferred out79,200Ending work-in-process units22,000Material costs added$37,400Conversion costs$75,460Transferred-in costs$141,240What is equivalent units for transferred-in cost, direct materials, and conversion cost, respectively? Separate with slash /.Moon Company produces baseball bats and cricket paddles. It has two departments that process all products Cutting Department and Finishing Department.In Finishing Department, direct materials (DM) are added at the start of the process and conversion costs (CC) are added evenly during the process. Company is using Weighted Average method for the Finishing Department.During July, beginning work in process in the Finishing Department was 80% complete as to conversion. Beginning inventories included $30,800 for transferred-in costs, $13,200 for direct materials, and $27,500 for conversion costs. Ending inventory was 30% complete as to CC. Additional information about the Finishing Department follows:FinishingBeginning work-in-process units26,400Units transferred in this period74,800Units completed & transferred out79,200Ending work-in-process units22,000Material costs added$37,400Conversion costs$75,460Transferred-in costs$141,240What is equivalent units for transferred-in cost, direct materials, and conversion cost, respectively? Separate with slash /. A. Read each sentence. Circle the adjective and underline the noun. Follow the model.Modelo Enrique es un joven serio.1. Mi primo es joven.2. Mis hermanas son chicas jvenes.3. Carlos y Pedro son chicos deportistas.4. T eres una persona paciente,5. Yo soy una chica trabajadora.Yli6. Nosotras somos estudiantes serias.the adiective that describes it A movie ticket costs $7. How much do six movie tickets cost? why are cells growing on top of each other even if they have space in culture flask PLEEASEEE HELP WILL MARK BRAINLIEST IF CORRECT Which table is a probability distribution table?1. X Blue Orange Green PurpleP 0.3 0.4 0.5 0.22. X Blue Orange GreenGreen PurpleP 0.6 0.05 0.05 10.33. X Blue Orange GreenGreen PurpleP -1 1 1 04. X Blue Orange Green PurpleP 0.4 0.4 0.2 10.1 Which of the following is the balance for a single $2,702 deposit in an account with an APR of 3% that compounds interest monthly and is invested for 37 years? Stem cells are used to treat some human diseases.Stem cells can be collected from early embryos. These stem cells have not begun todifferentiate, so they could be used to produce any kind of cell, tissue or organ. Theuse of embryonic stem cells to treat human diseases is new and for some diseases,trials on patients are happening now.Stem cells can also be collected from adult bone marrow. The operation is simplebut may be painful. Stem cells in bone marrow mainly differentiate to form bloodcells. These stem cells have been used successfully for many years to treat somekinds of blood disease. Recently there have been trials of other types of stem cellfrom bone marrow. These stem cells are used to treat diseases such as heartdiseaseEvaluate the use of stem cells from embryos or from adult bone marrow for treatinghuman diseasesYou should give a conclusion to your evaluation.(5 marks) which compound has the highest free energy and produces the most atp per molecule when oxidized? If Roger wantsto develop aroutine, whatmust he do?A. Seguir una rutina.B. Seguir una dieta mal balanceada.C. Seguir una dieta balanceada. Pa help naman po dito PLSSS HELP THIS IS HARD ANYONE PLEASE HELP ME the linear functions f(x) and g(x) are represented on the graph where g(x) is a transformationPart A: Describe two types of transformations that can be used to transform f(x) to g(x). (2 points)Part B: Solve for k in each type of transformation. (4 points)Part C:an equation for each type of transformation that can be used to transform f(x) to g(x). (4 points) Why is formula equation more meaningful than a word equation? What are the odds of winning a game, if the probability of losing the game is 5 /13 ? A contractor bought 12.6 ft? of sheet metal. He has used 2.1 ft? so far and has $210 worth of sheet metal remaining. The equation 12.6x-2.1x = 210 represents how much sheet metal is remaining and the cost of the remaining amount. How much does sheet metal cost per square foot?