Which action could cause a sample of liquid to boil ?

Answer:

emitting or relating to the emission of ionizing radiation or particles

Explanation:

Radiation can damage the DNA in our cells.

In other words!

the giving off of rays of energy or particles by the breaking apart of atoms of certain elements (as uranium)

Answer:

The answer should be A. the mechanism will provide defense against many different types of pathogens :)

Have an amazing day!!

Please rate and mark brainliest!!

Answer:

A

Explanation:

did this before

Answer:

The chemistry is the brach of science dealing with properties of matter and the changes which the matter undergo

Explanation:

PLEASE MARK ME BRAINLIEST IF MY ANSWER IS CORRECT PLEASE

Answer:

Explanation:

molarity = (moles of solute)/(liters of solution) = 9.7/2.3 = 4.2

The equation of the titration of hydrochloric acid and sodium hydroxide is given as:

[tex]NaOH + HCl \rightarrow NaCl + H_2O[/tex]

An equation of a chemical reaction is a way of representing chemical reactions that occur using the symbols or chemical formula of the compounds reacting.

The titration of hydrochloric acid and sodium hydroxide is a chemical reaction which the given equation:

[tex]NaOH + HCl \rightarrow NaCl + H_2O[/tex]

Therefore, the reaction is a neutralization reaction.

Learn more about chemical reaction at: https://brainly.com/question/11231920

#SPJ1

Answer:

When carbon dioxide dissolves in seawater, the water becomes more acidic and the ocean's pH (a measure of how acidic or basic the ocean is) drops.

Explanation:

hope this helps

Answer:

High spec heat cap

Explanation:

Specific heat =   Q/(m *Tchange)

re-arrange to

Tchange =  Heat/(m *spec heat)

   this shows that a high  spec heat (in the denominator) will require a lot of heat (in the numerator) to change the Temp much  

Answer:

CFCs

Explanation:

When CFCs come into contact with sunlight, they divide into molecules. One of those molecules is chlorine, which destroys the ozone.

Answer:

Nitrogen reacts with oxygen to form a number of nitrogen oxides. It exhibits different oxidation states in its oxides, ranging from +1 to +5. Oxides of nitrogen having nitrogen in the higher oxidation state are more acidic than that in lower oxidation state. Nitrogen oxides are critical components of photochemical smog. They produce the yellowish-brown colour of the smog. In poorly ventilated situations, indoor domestic appliances such as gas stoves and gas or wood heaters can be significant sources of nitrogen oxides.

Following are the harmful effects caused by the oxides of nitrogen

Nitrogen oxides causes irritation in mucous membrane.

Large concentrations of Nitrogen oxide causes lungs problems in humans

It causes injuries to vegetation by damaging leaves.

Nitrogen oxide oxidizes Hydrocarbons in the presence of sunlight, which causes eye irritation, asthama attacks, nasal and throat infections.

NO: sharp, sweet-smelling, colourless gas. Melting point: -163.6°C. Boiling point: -151.8°C. Relative Density: 1.04 (air = 1) NO2: reddish-brown gas with irritating odour

Answer: 1. 10% is used to live 30% is stored.

2. an educated guess.

Explanation:

A covalent bond is formed by the sharing of electrons between 2 atoms.

A covalent bond is a chemical bond that involves the sharing of electron pairs between atoms.

Sharing of electrons forms covalent bonds between the atoms.

These bonds are mainly formed between two similar atoms of electronegativity.

Where ionic bonds are formed by sharing electrons where there is an electronegativity difference between metals and non-metals. Ex. NaCl

Hence, a covalent bond is formed by the sharing of electrons between 2 atoms.

Learn more about covalent bond here:

https://brainly.com/question/19382448

#SPJ1

Answer:

#4: 0.89 mol/L #5: 0.36 mol

Explanation:

#4: Morality is Moles/ Liters

So take 3.2 mols ÷ 3.6 L = 0.8888... since there are 2 sig figs in the question the answer would round to 0.89 mol/L

#5: to find the number of moles needed, you take the mol/L and multiply that by the volume.

0.89 mol/L ×0.400L = 0.356 mols. the liters cancel out. Since 0.89 has the least number of sig figs your final answer should have 2. which it 0.36 mols.

I hope this helps, good luck!

The teacher prepares 2.50 liters (l) of a salt solution for a class experiment, in this quantity 2.65 quartz are present.

Conversion factor is a quantity which will be multiplied or divide with any other measurement for the conversion of that measurement.

Given that quantity of salt solution = 2.50 L

We know that, 1 L = 1.06 qt

Here conversion factor is 1.06 qt/L as it will be multiplied on given measurement to convert into quartz as:

2.50L = 2.50L × 1.06qt/L = 2.65qt

Hence required value is 2.65qt.

To know more about conversion factor, visit the below link:

https://brainly.com/question/97386

Answer:

2.65 qt

Explanation:

The temperature of the wind as that decreases the volume and the pressure of the balloon to the given values is 14.09°C.

Combined gas law put together both Boyle's Law, Charles's Law, and Gay-Lussac's Law. It states that "the ratio of the product of volume and pressure and the absolute temperature of a gas is equal to a constant.

It is expressed as;

P₁V₁/T₁ = P₂V₂/T₂

Given the data in the question;

We substitute our given values into the expression above.

P₁V₁/T₁ = P₂V₂/T₂

( 0.980atm × 14.5L )/293.15K = ( 0.973684atm × 14.3L )/T₂

14.21Latm / 293.15K = 13.92368Latm / T₂

14.21Latm × T₂ = 13.92368Latm × 293.15K

14.21Latm × T₂ = 4081.72679LatmK

T₂ = 4081.72679LatmK / 14.21Latm

T₂ = 287.24K

T₂ = 14.09°C

Therefore, the temperature of the wind as that decreases the volume and the pressure of the balloon to the given values is 14.09°C.

Learn more about the combined gas law here: brainly.com/question/25944795

#SPJ1

Answer:

-65 kJ

Explanation:

To use Hess's Law, you need to combine the equations in a way that results in the desired equation. To add reactants/products, just add the equations and their subsequent heat of reactions. Subtracting reactants/products involves flipping the signs of enthalpies, duplicating reactants/products involves multiplying the coefficients and enthalpies by a desired number.

    A + 2B -->   C + D

+            B --> 2C + D
------------------------------------

    A + 3B --> 3C + 3D

In this case, you only need to add the equations together to get the desired equation. Because you just add the equations, combine each equations' heat of reaction.

(-20 kJ) + (-45 kJ) = -65 kJ

The overall heat of reaction of the desired reaction is -65 kJ.

Answer:

Dalton's law of partial pressure

Explanation:

In Dalton's law of partial pressure is states that the total pressure of a gas mixture is equal to the sum of the partial pressures of the component gasses.

This is the equation: [tex]P_{total} =P_{gas 1} +P_{gas2} + P_{gas3}[/tex].. so on and so forth.

basically what Dalton is saying partial pressures are just fractions of the total pressure, think of it as if you cut 12 slices of pizza and 12 people grabbed a slice of the pizza. Each person has 1/12 of that pizza, 1/12 x 12 = 1.  

let's say there is a container filled with nitrogen gas (N) , hydrogen gas (H), and ammonia gas (NH₃).

N= 40 atm

H=20 atm

NH₃= 10 atm

you would plug this information into this equation: [tex]P_{total} =P_{gas 1} +P_{gas2} + P_{gas3}[/tex]

[tex]P_{N} + P_{H} + P_{NH{3}} = P_{total}[/tex]

 [tex]P_{40} + P_{20} + P_{10} = 70[/tex]  

N is 40/70 of the gaseous mixture.

H is 20/70 of the gaseous mixture.

NH₃ is 10/70 of the gaseous mixture.

if you add these fractions up:

[tex]\frac{40}{70} +\frac{20}{70} +\frac{10}{70} =\frac{1}{1} =1[/tex]

I really hope this helps a little!

Answer: 44.0 g/mol

Explanation:

[tex]M=m.RT/PV[/tex]

M=1.211*0.082*296/ 0.987*0.677

M= 44 g/mol

A gas collected from a reaction has a mass of 1.211 g and occupies a volume of 0.677 L. The temperature in the laboratory is 296 K, and the air pressure is 0.987 atm  the molar mass of the gas 23.7 g/mol. option A is correct.

The universal gas law given by Boyle, Charles , Avogadro and Gauss known as combined gas law with respect to temperature, volume and pressure using universal gas constant and number of moles.

According to universal gas equation or combined gas equation

          P V = n R T

where , P = pressure

             V = volume

              n = number of moles

              R = universal gas constant = 8.313

               T = temperature

n = W / M.M

W = weight

M.M = molar mass

substituting the value in the equation

0.987 × 0.677 = 1.211 / M.M × 8.313 × 296

M.M = 23.7 g/mol

Therefore, gas collected from a reaction has a mass of 1.211 g and occupies a volume of 0.677 L. The temperature in the laboratory is 296 K, and the air pressure is 0.987 atm  the molar mass of the gas 23.7 g/mol. option A is correct.

Learn more about gas law, here:

https://brainly.com/question/1541059

#SPJ5

it's 500kg

Explanation:

I did this I hope this helps

Explanation:

No observable change because nitrogen is an inert gas...

The order which reflect clomiphene's mechanism of action include the following:

This is the process in which a mature egg is released from the ovary and clomiphene is a medication which induces it.

This is done by the steps mentioned above so as to ensure mature egg is released for fertilization.

Read more about Ovulation here https://brainly.com/question/17044166

#SPJ1

In designing the experiment, the researchers used Y32P-ATP.

Adenosine triphosphate (ATP) is an organic substance and a hydro-trope that provides energy for a variety of functions in

Researchers used Y32P-ATP Because the Y-phosphate of ATP is used for phosphoryl transfer by kinases. As a result, Y32P-ATP is required for the experiment.

Hence the used ATP is Y32P-ATP.

To know more about ATP, visit the below link:

https://brainly.com/question/893601

#SPJ1

The principal law governing pollution of the nation’s surface waters is the Federal Water

Pollution Control Act, or Clean Water Act. Originally enacted in 1948, it was totally revised by

amendments in 1972 that gave the act its current dimensions. The 1972 legislation spelled out

ambitious programs for water quality improvement that have since been expanded and are still

being implemented by industries and municipalities.

This report presents a summary of the law, describing the statute without discussing its

implementation. Other CRS reports discuss implementation, including CRS Report R42883,

Water Quality Issues in the 113th Congress: An Overview, and numerous products cited in that

report.

The Clean Water Act consists of two major parts, one being the provisions which authorize

federal financial assistance for municipal sewage treatment plant construction. The other is the

regulatory requirements that apply to industrial and municipal dischargers. The act has been

termed a technology-forcing statute because of the rigorous demands placed on those who are

regulated by it to achieve higher and higher levels of pollution abatement under deadlines

specified in the law. Early on, emphasis was on controlling discharges of conventional pollutants

(e.g., suspended solids or bacteria that are biodegradable and occur naturally in the aquatic

environment), while control of toxic pollutant discharges has been a key focus of water quality

programs more recently.

Prior to 1987, programs were primarily directed at point source pollution, that is, wastes

discharged by industrial and municipal facilities from discrete sources such as pipes and outfalls.

Amendments to the law in that year authorized measures to address nonpoint source pollution

(runoff from farm lands, forests, construction sites, and urban areas), which is estimated to

represent more than 50% of the nation’s remaining water pollution problems. The act also

prohibits discharge of oil and hazardous substances into U.S. waters.

Under this act, federal jurisdiction is broad, particularly regarding establishment of national

standards or effluent limitations. Certain responsibilities are delegated to the states, and the act

embodies a philosophy of federal-state partnership in which the federal government sets the

agenda and standards for pollution abatement, while states carry out day-to-day activities of

implementation and enforcement.

To achieve its objectives, the act is based on the concept that all discharges into the nation’s

waters are unlawful, unless specifically authorized by a permit, which is the act’s principal

enforcement tool. The law has civil, criminal, and administrative enforcement provisions and also

permits citizen suit enforcement.

Financial assistance for constructing municipal sewage treatment plants and certain other types of

water quality improvements projects is authorized under Title VI. It authorizes grants to capitalize

State Water Pollution Control Revolving Funds, or loan programs. States contribute matching

funds, and under the revolving loan fund concept, monies used for wastewater treatment

construction are repaid to states, to be available for future construction in other communities.

Answer: 0.37 M

Explanation:

HCl has a gram-formula mass of 36.46 g/mol, so 40.0 g is about 40.0/36.46=1.10 mol.

This means that since molarity = (moles of solute)/(liters of solution), the answer is 1.10/3.0 = 0.37 M

Answer:

D. Extremely high pressure

B. Unusally high oxygen Levels

Sorry about that

becasue there is not ice on the bottum of the ocean it is really hot and unever terran it becasue of big rock forming together they all ready figurd that out

Hope This Helps

Answer:

D and B

Explanation:

Answer:

2.17 seconds i believe.

Explanation

I took the amount of meters and turned them into feet before dividing the amount of feet by the total amount of seconds it took for her to travel to the classroom library

Answer:

weakness, There are two conditions that lead to a weak volcanic eruption, low viscosity magma and little presence of trapped gases.

strength, The VEI or (Volcanic Explosivity Index)  is a scale that describes the size of explosive volcanic eruptions based on magnitude and intensity. The numerical scale (from 0 to 8) is a logarithmic scale, and is generally analogous to the Richter and other magnitude scales for the size of earthquakes.

Explanation:

i really hope this helps. :)

Answer:1,01

Explanation:

Answer:

Fibre optic technology.

Explanation:

Fibre optic technology, as the name implies, uses light pulses to transmit data via strands of glass or plastic. It's the preferred technology for the government's National Broadband Network (NBN), which offers 100Mbps+ download speeds.