Whenever the alternating current frequency in a series RLC circuit is halved,
a. the inductive reactance is doubled and the capacitive reactance is halved.
b. the inductive reactance is doubled and the capacitive reactance is doubled.
c. the inductive reactance is halved and the capacitive reactance is halved.
d. the inductive reactance is halved and the capacitive reactance is doubled.
e. the reactance of the circuit remains the same.

Explanation:

let us use the explanation below to get the intuition so desired;

According to Faraday's law of electro magnetic induction, when ever a coil/conductor is made to rotate in a magnetic field, voltage or emf is created and current is produced, in the long run energy has be produced or converted.

The conversion of this energy is made possible by the motion of the coil/conductor is the magnetic field, just by the  motion of the conductor cutting through the magnetic field, thus creating electro motive force(E.M.F) hence producing current, and ultimately energy is created

Answer:

B. they have less mass than their reactants

Explanation:

In both nuclear fission and nuclear fusion, the products have less mass than their reactants. So, option B is correct.

Nuclear reaction is defined as the reaction that involves the collision between one or more atomic nuclei and a highly energetic subatomic particle to produce one or more nuclei along with the emission of a large amount of energy.

Here,

Nuclear fission and fusion are two types of nuclear reactions that involves the production of large amount of energy from atomic nuclei.

Nuclear fission is the nuclear reaction in which a heavier nucleus is split into two or more lighter nuclei, under radioactive condition, with the release of a massive amount of energy.

Nuclear fusion is the nuclear reaction in which two or more lighter nuclei nuclei fuse together under radioactive condition and forms a heavier nuclei and by releasing a large amount of energy.

In both nuclear fission and nuclear fusion, there occurs a release of large amount of energy. This is because most of the mass of the reactants is converted into energy which is known as the mass-energy. So the products of these nuclear reactions will have lesser mass than their reactants.

Hence,

In both nuclear fission and nuclear fusion, the products have less mass than their reactants.

To learn more about nuclear reactions, click:

https://brainly.com/question/12786977

#SPJ3

The current does not change.

All three resistors are connected directly to the power source, and are unaware of each other.

Answer:

λ = 1.8 x 10⁻⁷ m = 180 nm

Explanation:

First we find the work function of tungsten by using the following formula:

∅ = hc/λmax

where,

∅ = work function = ?

h = Plank's Constant = 6.626 x 10⁻³⁴ J.s

c = speed of light = 3 x 10⁸ m/s

λmax = maximum wavelength for photoelectric emission = 230 nm

λmax = 2.3 x 10⁻⁷ m

Therefore,

∅ = (6.626 x 10⁻³⁴ J.s)(3 x 10⁸ m/s)/(2.3 x 10⁻⁷ m)

∅ = 8.64 x 10⁻¹⁹ J

Now we convert Kinetic Energy of electron into Joules:

K.E = (1.5 eV)(1.6 x 10⁻¹⁹ J/1 eV)

K.E = 2.4 x 10⁻¹⁹ J

Now, we use Einstein's Photoelectric Equation:

Energy of Photon = ∅ + K.E

Therefore,

Energy of Photon = 8.64 x 10⁻¹⁹ J + 2.4 x 10⁻¹⁹ J

Energy of Photon = 11.04 x 10⁻¹⁹ J

but,

Energy of Photon = hc/λ

where,

λ = wavelength of light = ?

Therefore,

11.04 x 10⁻¹⁹ J = (6.626 x 10⁻³⁴ J.s)(3 x 10⁸ m/s)/λ

λ = (6.626 x 10⁻³⁴ J.s)(3 x 10⁸ m/s)/(11.04 x 10⁻¹⁹ J)

λ = 1.8 x 10⁻⁷ m = 180 nm

Answer:

The magnetic field remains the same.

Explanation:

If a solenoid has length L, N windings, and radius b, then the magnetic field inside the solenoid is given by :

[tex]B=\mu_o NI[/tex]

[tex]\mu_o[/tex] is magnetic permeability

If the radius of the solenoid were doubled and all other quantities remained the same, the magnetic field inside the solenoid would remains the same as it is independent of the radius of the solenoid.

Answer:

a) Volt

Explanation:

The standard metric unit on electric potential difference is the volt.

answer

all of the above

explanation

as we know that the si unit of potential difference is volt

which is equal to j/c and j/c is equal to j/a.s so the correct answer is all of the above

a).  frequency = (speed) / (wavelength)

The speed of light is around 3 x 10⁸ m/s.

For 380 nm (violet light), frequency = (3 x 10⁸ m/s) / (380 x 10⁻⁹ m)

Frequency = 7.89 x 10¹⁴ Hz

For 760 nm (red light), frequency = (3 x 10⁸ m/s) / (760 x 10⁻⁹/s)

Frequency = 3.94 x 10¹⁴ Hz

The ratio is 2 .

That's 1 octave, or 0.3 of a decade.

b).  The ratio of highest/lowest sounds is (20,000 Hz/20 Hz) = 1,000

That's 3 decades, or about 10 octaves.

===> Speaking logarithmically ( ! ), ears are sensitive to a range of sound frequencies that's 10 times as wide as the range of light frequencies that eyes can detect.

Answer:

theory

Explanation:

A scientist can contribute to the formation of a theory in a particular subject by conducting research along the line of that subject.

Conducting research requires the formation of a hypothesis and testing the hypothesis by conducting a relevant experiment during which data are gathered, analyzed, and interpreted in order to falsify or accept the hypothesis.

A good experiment must be replicate-able. When the same experiment is repeated by different independent researchers and the same conclusion is arrived at, this could potentially lead to the formation of a theory.

Hence, a scientist can contribute to the formation of a theory by conducting an experiment with replicability in order to test a hypothesis.

Answer:

-4m/s

Explanation:

use the formula

[tex]f = ma[/tex]

where f-force

m-mass

a-accleration

so

1kN=1000N

so apply

4000=1000×a

a=4m/s

(the negative is because the car was braking)

Answer:

Your answer is -4 m/s^2

Explanation:

Set Up: Let +x be the direction the car is traveling.  

List the known & unknown quantities:  

   m = mass of the car = 1000 kg

  υ = 30 m/s

  Fx = –4 kN = –4000 N (negative since it is a braking force)

  ax = acceleration =?  

Solve: Use Newton’s second law of motion.  

Fx=max    

ax=Fx/m = −4000 N /1000 kg = −4000 kg·m/s^2 / 1000 kg =−4m/s^2

Answer:

5.23 C

Explanation:

The current in the wire is given by I = ε/R where ε = induced emf in the wire and R = resistance of wire.

Now, ε = -ΔΦ/Δt where ΔΦ = change in magnetic flux = AΔB and A = area of loop and ΔB = change in magnetic field intensity = B₂ - B₁

B₁ = 0.670 T and B₂ = 0 T

ΔB = B₂ - B₁ = 0 - 0.670 T = - 0.670 T

A = πD²/4 where D = diameter of circular loop = 13.2 cm = 0.132 m

A = π(0.132 m)²/4 = 0.01368 m² = `1.368 × 10⁻² m²

ε = -ΔΦ/Δt = -AΔB/Δt = -1.368 × 10⁻² m² × (-0.670 T)/Δt= 0.9166 × 10⁻² Tm²/Δt

Now, the resistance R of the circular wire R = ρl/A' where ρ = resistivity of copper wire =  1.68 x 10⁻⁸ Ω.m, l = length of wire = πD and A' = cross-sectional area of wire = πd²/4 where d = diameter of wire = 2.25 mm = 2.25 × 10⁻³ m

R = ρl/A' = 1.68 x 10⁻⁸ Ω.m × π × 0.132 m÷π(2.25 × 10⁻³ m)²/4 = 0.88704/5.0625 = 0.1752 × 10⁻² Ω = 1.752 × 10⁻³ Ω

So, I = ε/R = 0.9166 × 10⁻² Tm²/Δt1.752 × 10⁻³ Ω  

IΔt = 0.9166 × 10⁻² Tm²/1.752 × 10⁻³ Ω = 0.5232 × 10 C

Since ΔQ = It = 5.232 C ≅ 5.23 C

So the charge is 5.23 C

The induced emf through wire depends on the current flow (indirectly with charge flow as well).

The value of charge moving past a point in the coil during its operations is 5.23 C.

The region in a space where a particle experiences some magnetic force, is known as the magnetic field.

Given data -

The diameter of the circular loop is, d = 13.2 cm = 0.132 m.

The change in magnetic field strength is, ΔB = 0.670 T.

The new diameter of the wire is, d' = 2.25 mm = 2.25 × 10³ m.

The resistivity of the wire is, [tex]\rho = 1.68 \times 10^{-8} \;\rm \Omega.m[/tex].

The current in the wire is given by the following expression,

I = ε/R

Here,

ε is the induced emf in the wire.

R is the resistance of the wire.

And the expression for the induced emf of the wire is given as,

ε = -ΔΦ/Δt

Here,

ΔΦ is the change in magnetic flux. And its expression is,

ε = A × ΔB

Here,

A is the area of the loop. And its value is, A = πd²/4.

Solving as,

A = π(0.132 m)²/4

A = 0.01368 m²
A = `1.368 × 10⁻² m²

Now, calculating the induced emf as,

ε = ΔΦ/Δt

ε = A × ΔB/Δt

ε = 1.368 × 10⁻² m² × (0.670 T)/Δt

ε = 0.9166 × 10⁻² Tm²/Δt

Now, the resistance R of the circular wire is,

R = ρ × L/A'

Here,

L is the length of the wire and its value is. L = πd .

And A' is the new cross-sectional area of wire,

A' = πd'²/4

So, the resistance is,

R = ρ × L/A'

R = 1.68 x 10⁻⁸  ×( π × 0.132 m) ÷ π(2.25 × 10⁻³ m)²/4 =

R = 0.88704/5.0625

R = 0.1752 × 10⁻² Ω

R = 1.752 × 10⁻³ Ω

Now, the current flow (I) in the wire is given as,

I = ε/R

I = 0.9166 × 10⁻² Tm²/Δt1.752 × 10⁻³ Ω  

And obtaining the value of charge from the expression of current as,

Q = IΔt
Q = 0.9166 × 10⁻² Tm²/1.752 × 10⁻³ Ω

Q = 0.5232 × 10 C

Q = 5.23 C

Thus, we can conclude that the value of charge moving past a point in the coil during its operations is 5.23 C.

Learn more about the resistance of a wire here:

https://brainly.com/question/15067823

Explanation:

Ohm's law gives the relationship between current, voltage, and resistance. Its mathematical form is given by :

V = IR

I is current and R is resistance

Resistance resists the flow of electric current in a circuit. When the amount of applied voltage is increased, it will not change the resistance. It increases the current. Hence, the correct option is (C).

Answer:

personally I'd say C by do not know if that is the exact answer

Answer:

The answer(s) for this question are as followed: A, C, & D

Explanation:

I hope this helped, let me know if i missed any.

Answer:

Friction force always acts tangent to the surface at points of contact. Friction force acts opposite to the direction of motion.

Explanation:

Answer:

It is a finite resource.

Explanation:

A nonrenewable resource is a natural substance that is not replenished with the speed at which it is consumed. Fossil fuels such as oil, natural gas, and coal are examples of nonrenewable resources.

Answer:

Coal, oil, natural gas.

Explanation:

Non renewable resource -A non-renewable resource (also called a finite resource) is a natural resource that cannot be readily replaced by natural means at a quick enough pace to keep up with consumption.

Coal, oil, and natural gas are all examples of non-renewable resources and cannot be readily replaced to keep up with consumption.

Answer:

Explanation:

In physics, there are two types of physical quantities namely the fundamental and the derived quantities. Fundamental quantities are independent quantities on which derived quantities depends on. Length, mass and time are examples of fundamental quantities.

The SI unit of length is meters. A meter is a multiple unit. Its submultiple units are centimetres (10⁻²metres), kilometres (10³metres), decimetres (10⁻¹metres) etc

The SI unit of mass is kilogram (kg). The only sub multiple unit used in real-life situation is grams.

1 kg = 100 grams

The SI unit of time is seconds. The multiple units are the minutes, hours, weeks, days and years.

1 minute = 60 seconds

1 hour = 3600 seconds

1 day = 24 * 3600 = 86,400 secs

Answer:

8996kg*m/s/s

Explanation:

Given:

a=26m/s/s

m=346kg

Required:

f=?

Formula:

f=m*a

Solution:

f=346kg*26m/s/s

f=8996kg*m/s/s

Hope this helps ;) ❤❤❤

Answer:

[tex]\boxed{F = 8996 \ Newton}[/tex]

Explanation:

Given:

Mass = m = 346 kg

Acceleration = a = 26 m/s²

Required:

Force = F = ?

Formula:

F = ma

Solution:

F = 346 * 26

F = 8996 Newton

Answer:

u=36.8m/s

Explanation:

because of the acceleration is a constant acceleration we can use one of the "SUVAT" equations

u^2=v^2-2ā*s. where:

u^2 stands for intial velocity

v^2 stands for final velocity

since the cougar skidded to a complete stop the final velocity is zero.

u^2=v^2-2ā*s

u^2=(0)^2 -2(-2.87 m/s^2)*236 m

u^2=0+5.74m/s^2* 236m

u^2=1354.64m^2/s^2

u=√1354.64m^2/s^2

u=36.8m/s (approximate value)

when ever the acceleration is constant you can use one of the following equation to find the required value.

1. v = u + at. (no s)

2. s= 1/2(u+v)t. (no ā)

3. s=ut + 1/2at^2. ( no v)

4. v^2=u^2 + 2āS. (no t). 5. s= vt - 1/2at^2. (no u)

Answer:

3.94

Explanation:

divide total mass by the number of blocks since they are identical

Answer:

3.94

Explanation:

You want to find the mass of one block. Since we know there is 8 blocks with the same mass, you can divide the total mass by 8 since the mass is equally distributed within the 8 blocks

Answer:

Mid ocean ridges are evidence of sea floor spreading as tectonic movement opens a gash or "fault" in the ocean floor.

Answer:

Eruptions of molten material, magnetic stripes in the rock of the ocean floor, and the ages of the rocks themselves; this evidence led scientists to look again at Wegener's hypothesis of continental drift.

Answer:

[tex]E=6.01\times 10^{-3}\ J[/tex]

Explanation:

It is given that,

Side of a square loop, l = 24 cm = 0.24 m

Resistance of loop, R = 6.1 ohms

Initial magnetic field is 0.665 T and final magnetic field is 0 as the field is removed in 40 ms

We need to find the electrical energy dissipated in this process.

Due to change in magnetic field, the loop will induce a voltage. The induced voltage is given by :

[tex]V=-\dfrac{dB}{dt}\\\\V=\dfrac{BA}{t}[/tex]

If I is induced current then,

[tex]V=IR[/tex]

[tex]I=\dfrac{V}{R}\\\\I=\dfrac{BA}{tR}[/tex]

Power is given by voltage times current. So,

[tex]P=\dfrac{(BA)^2}{(t^2R)}[/tex]

Now, energy is given by the product of power and time. So,

[tex]E=\dfrac{(BA)^2}{(t^2R)}\times t\\\\E=\dfrac{(BA)^2}{(tR)}[/tex]

Now putting all the values in above formula. So,

[tex]E=\dfrac{(0.665\times (0.24)^2)^2}{(40\times 10^{-3}\times 6.1)}\\\\E=6.01\times 10^{-3}\ J[/tex]

So, the electrical energy of [tex]6.01\times 10^{-3}\ J[/tex] is dissipated in this process.

The electrical energy dissipated throughout this process will be "6.01 × 10⁻³ J".

According to the question,

Square loop's side, l = 24 cm or,

                                  = 0.24 m

Loop's resistance, R = 6.1 ohms

Initial magnetic field = 0.665 T

Final magnetic field = 0

We know the relation,

→ V = - [tex]\frac{dB}{dt}[/tex]

      = [tex]\frac{BA}{t}[/tex]

Also we know,

Current, V = IR

               I = [tex]\frac{V}{R}[/tex]

                 = [tex]\frac{BA}{tR}[/tex]

Now, Energy, E = [tex]\frac{(BA)^2}{t^2R}[/tex] × t or,

                          = [tex]\frac{(BA)^2}{tR}[/tex]

By substituting the values,

                          = [tex]\frac{(0.665\times (0.24)^2)^2}{40\times 10^{-3}\times 6.1}[/tex]

                          = 6.01 × 10⁻³ J

Thus the response above is correct.                                  

Find out more information about magnetic field here:

https://brainly.com/question/26257705

Answer:

θ = 41.8º

Explanation:

This is an internal total reflection exercise, the equation that describes this process is

         sin θ = n₂ / n₁

where n₂ is the index of the incident medium and n₁ the other medium must be met n₁> n₂

        θ = sin⁻¹ n₂ / n₁

let's calculate

       θ = sin⁻¹ (1.00 / 1.50)

       θ = 41.8º

Answer:

Net force = 0

Explanation:

Short answer: if the middle book is not acceleration in any direction, the net force is zero.

Long answer: refer to the attached free-body diagram (FBD) to see why the net force is zero.  Skills to draw FBD are  essential in solving problems in statics.

Top book exerts -mg (downwards) on the middle book.

Middle book exerts -mg (downwards) on the bottom book.

Total downward force is -mg-mg = -2mg

By Newton's third law, when an object is not in motion, reaction equals action of -2mg in the opposite direction, therefore the reaction (upwards) is +2mg.

This makes the net force of -2mg (downwards) + 2mg (upwards) =0

On a horizontal table, three books are resting and balanced. The net force on the middle book will be equal to zero.

Equilibrium is the condition of an object when two or more opposing forces, whether internal, external or a combination of both, act on the body and cancel one another out to maintain the object in the same state as it was. The Latin term for weight or balance, libra, serves as the origin of the word equilibrium.

According to the question :

The net force is 0 if the middle book does not accelerate in any direction.

The Middle book is impacted negatively (downwards) by the top book.

The middle book pulls down on the lower book by -mg.

The total downward force is -2mg = (-mg-mg)

According to Newton's third rule, a reaction when an item is not moving equals an action of -2mg in the opposite direction, hence the reaction (upwards) is a response of +2mg.

Consequently, the net force of -2mg (downwards) + 2mg (upwards) = 0 is created.

To get more information about Equilibrium :

https://brainly.com/question/28527601

#SPJ2

Answer:

It emits alpha and beta particles.

Explanation:

EDG 20

Answer:

the answer is b, calcium-45

Explanation:

Answer:

Explanation:

magnetic field B = (3 i + 8 x 2 j )x 10⁻³ T

= (3 i + 16 j )x 10⁻³ T

L = - i ( unit length of conductor )

Force F = I ( L x B ) , I is current

= 5 [ - i x ( 3i + 16 j ) 10⁻³]

= 5 ( - 16 k ) x 10⁻³

F = - 80 x 10⁻³ k

Answer:

Options A, B as well as C are the correct choices.

Explanation:

This form of learning isn't always linked to the perhaps one given choice. And the response to the above will still be the appropriate one.

Answer:

D. ) The force would be zero newtons

Explanation:

Because

If you are at the center of the earth, gravity is zero because all the mass around you is pulling "up" (every direction there is up!)

So F=mg so if g is zero F is also zero