when using decimal degrees, latitudes above the equator and longitudes east of the prime meridian are negative, and latitudes below the equator and longitudes west of the prime meridian are positive. group of answer choices true false

Answers

Answer 1

False .When using decimal degrees to represent locations on the Earth, latitudes above the equator and longitudes east of the prime meridian are positive

When using decimal degrees to represent locations on the Earth, latitudes above the equator and longitudes east of the prime meridian are positive, while latitudes below the equator and longitudes west of the prime meridian are negative. The equator is defined as 0 degrees latitude, with positive values increasing northwards and negative values increasing southwards. The prime meridian is defined as 0 degrees longitude, with positive values increasing eastwards and negative values increasing westwards. This convention is widely used in geographic information systems and other applications that deal with spatial data.

Learn more about decimal degrees here:

https://brainly.com/question/29182854

#SPJ11


Related Questions

what material or type of material is the area between the point sur lighthouse and the california sea otter game refuge probably made of?

Answers

The area between Point Sur Lighthouse and the California Sea Otter Game Refuge is most likely made of rocky or sedimentary material, such as sandstone or shale.

The geological makeup of the area along the central coast of California, where Point Sur Lighthouse and the California Sea Otter Game Refuge are located, consists mostly of sedimentary rocks that have been uplifted and eroded over time. These rocks include sandstone, shale, and other types of sedimentary material. The rugged coastline and rocky shores are also indicative of the presence of hard, durable rock formations. Additionally, the area is known for its rugged cliffs and rocky beaches, which are typical features of areas with rocky or sedimentary material.

To know more about sedimentary material, click here:-

https://brainly.com/question/10594995

#SPJ11

what is the cause of the great mountain ranges on earth, such as the rockies, the andes, and the himalayas?

Answers

The great mountain ranges on Earth, such as the Rockies, the Andes, and the Himalayas, are primarily caused by tectonic plate movements.

Earth's crust is made up of numerous plates that move around on the planet's mantle. When two plates collide, one of the plates is forced beneath the other in a process called subduction.

The plate that is forced beneath begins to melt and the magma that forms rises up to the surface, causing volcanic eruptions.

Over time, the magma that reaches the surface cools and solidifies, creating new land.

The pressure of the colliding plates also causes the land to buckle and fold, forming mountain ranges. The height and size of the mountains depends on the intensity of the plate collision and the type of rock that is involved.

To learn more about mountain ranges, click here:

https://brainly.com/question/19698681

#SPJ11

a forested slope is set to be logged. which method will reduce disturbance, such as erosion and pollution, of a stream at the base of the slope from excess sediment?

Answers

There are a few methods that can help reduce disturbance to the stream at the base of the forested slope that is set to be logged. One approach would be to implement Best Management Practices (BMPs) during the logging process, such as installing silt fences, using erosion control blankets, and creating diversion ditches. These BMPs can help to reduce erosion and the amount of sediment that enters the stream.

Additionally, leaving a buffer zone of unlogged trees along the edge of the stream can also help to reduce disturbance and protect the aquatic ecosystem. Another method could be to conduct selective logging, where only certain trees are removed rather than clearcutting the entire area. This can help to minimize the amount of soil disturbance and erosion that occurs.

Overall, implementing these methods can help to mitigate the impacts of logging on the stream and reduce the amount of excess sediment that enters the water.

Know more about buffer zone:

https://brainly.com/question/3334798

#SPJ11

Adams’ Perceptions Of The Impact Of Slavery On The Nation. Which One Of The Following Statements Most Accurately Describes Those Perceptions. A. Despite The Incredibly Divisive Impact On The Nation, The Economic Benefits Of Slavery Were Undeniable And Warranted The Continued Support Of This Most

On page three, at the top of column one, we read about Adams’ perceptions of the impact of slavery on the nation. Which one of the following statements most accurately describes those perceptions.

a. Despite the incredibly divisive impact on the nation, the economic benefits of slavery were undeniable and warranted the continued support of this most "peculiar institution."

b. The different regions of the nation had markedly different interests, which had the potential to destroy the nation—pulling it apart as self-interests overtook any sense of national interests.

c. In the face of the young republic’s difficulties, slavery had the potential to unify the competitive states that otherwise might devolve into sectionalism and threaten the very fabric of the nation.

d. The complex and varied needs of the different regions of the United States in the early 19th century bolstered the vision established by the Constitution and the Declaration of Independence.

Answers

Based on the given options, the most accurate statement that describes Adams’ perceptions of the impact of slavery on the nation is option C: In the face of the young republic’s difficulties, slavery had the potential to unify the competitive states that otherwise might devolve into sectionalism and threaten the very fabric of the nation.

it has been said that no land in the usa is more sacred than a square mile of

Answers

It has been said that no land in the USA is more sacred than a square mile of land, and this could be attributed to various factors. For example, a square mile of land could be the site of a significant historical event or the location of a natural wonder that holds cultural or religious significance. Additionally, there could be a sacred site or monument within that square mile that is revered by a particular community or tribe.

However, it is important to note that the concept of sacred land is subjective and can vary depending on cultural, spiritual, and personal beliefs.

Know more about the density of an area:

https://brainly.com/question/26910545

#SPJ11

The best fishing grounds are located:
a. in the middle of the open ocean.
b. in temperate waters over continental shelves.
c. in tropical waters of the deep sea.
d. in equatorial deep waters.

Answers

The best fishing grounds are located in equatorial deep waters because of the favorable environmental conditions that exist in those areas. Equatorial deep waters are characterized by high temperatures, ample sunlight, and nutrient-rich water, which provide an ideal breeding ground for a variety of marine species.

The warm water temperature and abundant sunlight create the perfect environment for plankton, which is the primary food source for many marine organisms. This abundance of plankton attracts small fish, which, in turn, attract larger fish and other marine predators. This creates a thriving ecosystem that supports a variety of fish species, making equatorial deep waters the best fishing grounds.

Furthermore, the nutrient-rich water in equatorial deep waters is a result of the upwelling of nutrient-rich water from the ocean depths. This upwelling brings nutrients to the surface, which provides the perfect breeding ground for fish.


In conclusion, the best fishing grounds are located in equatorial deep waters due to the abundance of plankton, nutrient-rich water, favorable ocean currents, and warm temperatures. These conditions create a thriving ecosystem that supports a diverse range of fish species, making it a prime location for fishing.

To know more about marine species. click this link-

brainly.com/question/31033280

#SPJ11

aerosols are lost from the atmosphere through wet or dry ________.

Answers

Aerosols are lost from the atmosphere through wet or dry deposition. To answer your question, let me provide a step-by-step explanation:

1. Aerosols, which are tiny particles or droplets suspended in the atmosphere, can originate from various sources, such as natural processes (volcanic eruptions, dust storms) or human activities (industrial processes, vehicle emissions).

2. These content-loaded aerosols have an impact on air quality, climate, and human health. They can scatter or absorb sunlight, leading to changes in the Earth's radiative balance and potentially affecting climate.

3. To be removed from the atmosphere, aerosols undergo a process called deposition, which can be categorized as wet or dry.

4. Wet deposition occurs when aerosols are incorporated into precipitation (rain, snow, sleet) and then removed from the atmosphere as the precipitation falls to the ground. This process can effectively clean the air of aerosols and other pollutants.

5. Dry deposition, on the other hand, refers to the direct settling of aerosols onto the Earth's surface, without the involvement of precipitation. This process depends on factors such as particle size, wind speed, and the characteristics of the surface they settle on.

In summary, content-loaded aerosols are lost from the atmosphere through wet or dry deposition. These processes help maintain air quality and balance the concentration of aerosols in the atmosphere.

To know more about Aerosols refer here

https://brainly.com/question/29418985#

#SPJ11

The tendency of a mineral to break and produce smooth, curving, shell-shaped surfaces is termed:A.luster.B.cleavage.C. conchoidal fractureD. streak

Answers

The correct answer is (c) conchoidal fracture.

The tendency of a mineral to break and produce smooth, curving, shell-shaped surfaces is termed conchoidal fracture. This type of fracture is characteristic of certain minerals, such as quartz, obsidian, and other fine-grained materials, when they break along curved, rather than flat, surfaces.

Conchoidal fracture is a common characteristic used to identify certain minerals, and it can be used to distinguish between similar-looking materials. For example, both glass and quartz can have a similar appearance, but glass will typically exhibit a more pronounced conchoidal fracture due to its lower hardness. By understanding the properties and behaviors of minerals, scientists can gain insights into a wide range of fields, from materials science to geology to biology.

Know more about conchoidal fracture:

https://brainly.com/question/14526355

#SPJ11

a ________ is characterized by a single high and low tide each tidal day.

Answers

A "diurnal tide" is characterized by a single high and low tide each tidal day.

A diurnal tide is a tidal pattern characterized by a single high and low tide each tidal day. This tidal cycle typically occurs in regions near the equator, where the Coriolis effect is weak and the gravitational pull of the sun and moon is less pronounced. Diurnal tides are often predictable and occur at fixed times each day, making them relatively easy to monitor and study. However, they can also have significant impacts on coastal ecosystems and human activities, particularly in areas where the tide ranges are large. Understanding the dynamics of diurnal tides is an important aspect of coastal management and conservation.

To know more about tide please visit:

https://brainly.com/question/9493666

#SPJ11

Draw the parallels as straight lines parallel to the equator at distance from latitude 10°up to90°

Answers

Draw straight lines parallel to the equator at a distance of 10° to 90° from the equator.

Parallels as straight lines are also known as "lines of latitude". To draw the parallels from latitude 10° up to 90°, you need to draw a series of straight lines that are parallel to the equator and are at the same distance from it. The lines should start at 10° and end at 90°. Each line should be spaced equally apart from the equator and each other.

The lines of latitude represent the different degrees of latitude, and they are all parallel to each other, meaning they will never intersect. They are used to measure distances between two points on the earth's surface, and they are also used to map out the different parts of the world. The lines of latitude are important for navigation and geographical studies.

To learn more about parallel link is here:

brainly.com/question/31744314

#SPJ4

travertine is a type of ______ that forms through precipitation in springs, lakes, and caves.

Answers

Travertine is a type of sedimentary rock that is formed from calcium carbonate. It is a chemical sedimentary rock that forms through the precipitation of calcium carbonate from water.

The water that forms travertine is usually found in springs, lakes, and caves. The water contains dissolved calcium carbonate, which is deposited as a result of chemical reactions. Travertine is typically formed in areas where there is a lot of limestone and other calcium carbonate-rich rocks. The water that flows through these rocks dissolves the calcium carbonate and carries it to other areas where it can be deposited. This process can take thousands of years to form thick layers of travertine. Travertine has been used for construction and decoration for thousands of years. It is a popular choice for flooring, walls, and countertops because of its unique appearance and durability. Travertine comes in a range of colors, including beige, tan, white, and gray, and it often has a banded or veined appearance. Overall, travertine is a fascinating type of sedimentary rock that forms through a complex process of chemical reactions and deposition.

Learn more about travertine here:

https://brainly.com/question/30753866

#SPJ11

Factors responsible for change in time and season

Answers

The change in time and season is primarily caused by two major factors: the Earth's rotation on its axis and its revolution around the sun.

What are the factors responsible for change in time and season?

1. Rotation on its axis: which is an imaginary line running from the North Pole to the South Pole. This rotation takes around 24 hours to complete, causing the day and night to alternate.

2. Sun revolution: The Earth revolves around the sun in an elliptical orbit, completing one cycle in about 365 days. The changing distance between the Earth and the sun causes fluctuations in the amount of solar energy received by the Earth throughout the year.

Learn more about season at https://brainly.com/question/26566604

#SPJ1

malacca, thang-long, ayutthaya, aceh, bantam, mataram: these southeast asia cities:

Answers

Malacca, Thang-Long, Ayutthaya, Aceh, Bantam, and Mataram are all historically significant cities in Southeast Asia.

They were important centers of trade, culture, and politics in the region. Malacca was a major port city in Malaysia, known for its strategic location and rich cultural heritage. Thang-Long, now known as Hanoi, was the capital of Vietnam and played a crucial role in the country's history. Ayutthaya was the ancient capital of Thailand, known for its impressive temples and palaces. Aceh, located in Indonesia, was a center of Islamic scholarship and trade. Bantam, another Indonesian city, was an important trading port in the 17th century. And finally, Mataram was a kingdom located on the island of Java in Indonesia, known for its art, literature, and architecture.

These cities have played a significant role in shaping the history and culture of Southeast Asia.

Know more about Southeast Asia:

https://brainly.com/question/8843022

#SPJ11

_______1) Ophiolites are A) a sequence of rocks that are typically found in collisional orogens, B) a sequence of rocks that have a gross chemical similarity to oceanic lithosphere, C) a sequence of rocks whose seismic velocities are similar to those of oceanic lithosphere, D) A, B, & Cor E) none of the above. _______2) Layering of continental crust is poorly defined and reflects its complex geological history. T/F 3) Transfer of heat in the lithosphere is primarily by the process of A) advection, B) conduction, C) convection, D) conflation, or E) A & B.

Answers

The correct answer is D) A, B, & C.

Ophiolites are a sequence of rocks that are typically found in collisional orogens, have a gross chemical similarity to oceanic lithosphere, and have seismic velocities similar to those of oceanic lithosphere.

The statement is True. Layering of continental crust can indeed be poorly defined due to its complex geological history. Continental crust is formed through various processes such as accretion, collision, and magmatic activity, which can lead to complex and heterogeneous structures within the crust.

To know more about Ophiolites refer here

https://brainly.com/question/30026931#

#SPJ11

the amount of water vapor in the air (by volume) usually does not exceed ________.

Answers

Answer:

it usually doesn't exceed: 4%

Explanation:

The amount of water vapor in the air (by volume) usually does not exceed the saturation point. This means that the air cannot hold any more water vapor at a given temperature and pressure.

The saturation point varies depending on these factors, so the amount of water vapor in the air can change throughout the day and in different locations.

When the air reaches its saturation point, it can lead to the formation of clouds, fog, or precipitation. This is because the excess water vapor cannot remain in the air as a gas and must condense into liquid or solid form.

The saturation point also plays a role in determining the relative humidity, which is the amount of water vapor in the air compared to the maximum amount it can hold at a given temperature and pressure.

Understanding the saturation point and relative humidity is important for various industries such as agriculture, construction, and weather forecasting. For example, farmers need to know the relative humidity to determine the best time to water their crops and prevent over- or under-watering.

Construction workers need to know the saturation point to prevent moisture-related problems in buildings. And weather forecasters use the saturation point and relative humidity to predict the likelihood of precipitation and other weather patterns.

To know more about saturation point refer here

https://brainly.com/question/14118324#

#SPJ11

europe is characterized by being made up of what type of landform?__________

Answers

Europe is characterized by being made up of a peninsula landform. Europe is a large continent with a diverse range of landscapes and geological features.

A peninsula is a landform that is surrounded by water on three sides, and connected to a larger landmass on one side. Europe is considered a peninsula because it is bordered by water on three sides: the Arctic Ocean to the north, the Atlantic Ocean to the west, and the Mediterranean Sea to the south. The only land connection to another continent is at the eastern end of Europe, where it is connected to Asia. The peninsula shape of Europe has had significant impacts on its history, culture, and economy, including facilitating trade and migration, and leading to the formation of many distinct and diverse cultures within a relatively small geographic area.

To know more about peninsula landform

brainly.com/question/490357

#SPJ11

Why would astronomers be excited to see a neutron star merger and/or its electromagnetic (light) counterpart signal?

a. Neutron star mergers are thought emit more gravitational waves than black hole mergers.

b. If detected along with electromagnetic counterpart, they might provide additional test of general relativity.

c. If detected along with electromagnetic counterpart, they can be used to constrain cosmological expansion

d. All of the above

e. Only B and C

Answers

Astronomers would be excited to see a neutron star merger and/or its electromagnetic (light) counterpart signal because they can provide valuable insights into general relativity, cosmological expansion, and the emission of gravitational waves, with options (b), (c), and (d) being correct.

Astronomers would be excited to see a neutron star merger and/or its electromagnetic (light) counterpart signal because it has the potential to provide a wealth of information about the universe.

Neutron star mergers are thought to emit more gravitational waves than black hole mergers, providing new data for the emerging field of gravitational wave astronomy. If detected along with electromagnetic counterparts, they might provide additional tests of general relativity, which governs the behavior of gravity.

Learn more about gravitational waves

https://brainly.com/question/12162022

#SPJ4

overall, the requirements for a planet to have a habitable surface seem to be ________.

Answers

Overall, the requirements for a planet to have a habitable surface seem to be a stable and suitable distance from its star to maintain a temperature range that allows for the presence of liquid water.

And also a protective atmosphere that shields against harmful radiation, and a sufficient gravitational force to maintain its atmosphere and retain its water. Additionally, the planet must have a stable and consistent rotation to maintain a regular day/night cycle and stable climate.
Overall, the requirements for a planet to have a habitable surface seem to be diverse and interconnected. Key factors include the presence of liquid water, a stable atmosphere, and a suitable temperature range.

Visit here to learn more about radiation brainly.com/question/13934832

#SPJ11

Match the type of glacier with its description.
Ice sheets: Large, regionally continuous masses of ice more than 50,000 km^2 in area
Alpine Glaciers: Glaciers that begin in mountainous terrain and flow down valleys
Piedmont glaciers: Broad glaciers that form when a more restricted glacier spreads out as it moves into less confined topography

Answers

Ice Sheets are large, regionally continuous masses of ice more than 50,000 km^2 in area. Therefore, statement A is a match.

Alpine Glaciers are glaciers that begin in mountainous terrain and flow down valleys. Therefore, statement C is a match.

Piedmont Glaciers are broad glaciers that form when a more restricted glacier spreads out as it moves into less confined topography. Therefore, statement B is a match.

Matching the types of glaciers with their descriptions are as follows.

A) Ice Sheets - Large, regionally continuous masses of ice more than 50,000 km^2 in area

Ice sheets are the largest type of glacier and can cover entire continents. Their massive size fits the description provided. They are typically found in polar regions such as Antarctica and Greenland.

B) Piedmont Glaciers - Broad glaciers that form when a more restricted glacier spreads out as it moves into less confined topography

Piedmont glaciers form when an alpine glacier reaches a less confined area and spreads out, creating a wider and less steep glacier. They typically form at the base of mountains or steep valleys and spread out onto flat plains.

C) Alpine Glaciers - Glaciers that begin in mountainous terrain and flow down valleys

Alpine glaciers are glaciers that begin in mountainous terrain and flow down valleys. They are typically found in high-altitude areas and are formed by the accumulation and compaction of snow and ice over many years.

The reasoning behind these descriptions is based on the location and formation of each type of glacier. Ice sheets are the largest type of glacier and are found in polar regions, while piedmont glaciers form at the base of mountains and spread out onto flat plains. Alpine glaciers are formed in high-altitude mountainous terrain and flow down valleys.

Note: The question is incomplete. The complete question probably is: Match the type of glacier - Ice sheets, Alpine Glaciers, and Piedmont glaciers with its description. A) Large, regionally continuous masses of ice more than 50,000 km^2 in area. B) Broad glaciers that form when a more restricted glacier spreads out as it moves into less confined topography. C) Glaciers that begin in mountainous terrain and flow down valleys.

Learn more about Glacier:

https://brainly.com/question/2142179

#SPJ11

A volcanic mud flow is known as a(n) ________.A) laharB) mafic form of lavaC) tsunamiD) mantle plumeE) horst

Answers

Answer:

B

Explanation:

Answer: A) Lahar

Hi! A volcanic mud flow is known as a(n) A) lahar. A lahar is a mixture of water, mud, and volcanic debris that flows down the slopes of a volcano and its river valleys, typically during or after a volcanic eruption.

For Further information Visit :https://brainly.com/question/30055149

#SPJ11

During the finish grade step of establishment, what occurence(s)aid(es) settling of the soil?A) fertilizationB) irrigationC) rainfallD) persistent weed

Answers

None of the options listed (fertilization, irrigation, rainfall, persistent weed) directly relate to the occurrence of settling of the soil during the finish grade step of establishment.

During the finish grade step of establishment, settling of the soil may occur naturally as a result of compaction from the weight of equipment or through other factors such as erosion or changes in soil moisture content. Finish grading involves smoothing and leveling the soil surface to prepare it for the final steps of establishing vegetation or other landscaping features.

Fertilization, irrigation, and rainfall may all be important for establishing healthy vegetation in the finished grade, but they are not directly related to the settling of the soil during this step. The presence of persistent weeds may be undesirable in the finished grade, but it also does not directly relate to the occurrence of soil settling.

Learn more about Fertilization here;

https://brainly.com/question/21800652

#SPJ11

capital letters in air mass names reflect the ________ characteristics of the air mass

Answers

Capital letters in air mass names reflect the source region characteristics of the air mass.

Air masses are large bodies of air that form over source regions with similar characteristics, such as temperature and humidity.

The first letter in an air mass name indicates the general geographic region where the air mass originated, while the second letter indicates the specific characteristics of the air mass, such as temperature and humidity.

The use of capital letters in air mass names is a convention to differentiate them from other weather phenomena and to make it easier to communicate about air masses in meteorology.

For example, the air mass named "mT" refers to a maritime tropical air mass, which originates over warm, humid areas near the ocean.

To learn more about air mass, click here:

https://brainly.com/question/12089291

#SPJ11

generally, the greatest lake-effect snowfall in the great lakes region occurs on the ____ shores.

Answers

Generally, the greatest lake-effect snowfall in the Great Lakes region occurs on the eastern and southern shores.

This is mainly due to the prevailing westerly and northwesterly winds that blow across the lakes. These winds pick up moisture from the warmer lake surfaces as they travel over the water, and when they reach the colder land on the eastern and southern shores, the moisture condenses and falls as snow.

Lake-effect snowfall is most common during the winter months when the air temperature is colder than the lake temperature. The temperature difference causes the moisture-laden air to rise, cool, and form snow-producing clouds. The larger the temperature difference, the more significant the lake-effect snowfall can be.

Additionally, the snowbelt areas along the eastern and southern shores are more prone to heavy snowfall due to their topography. The higher elevations force the air to rise, further enhancing the snowfall potential. In summary, the eastern and southern shores of the Great Lakes experience the greatest lake-effect snowfall due to the combination of prevailing winds, temperature differences, and topography.

Learn more about Lake-effect snowfall here: https://brainly.com/question/30016716

#SPJ11

one sees differences in ________depending on the time in the sunspot cycle.

Answers

One sees differences in solar activity depending on the time in the sunspot cycle. The sunspot cycle, also known as the solar cycle, is a periodic change in the number of sunspots on the surface of the sun. It has an average duration of about 11 years, but it can vary from 9 to 14 years.

The cycle is characterized by a period of high activity, when the number of sunspots is at its maximum, followed by a period of low activity, when the number of sunspots is at its minimum.During the high-activity phase of the sunspot cycle, the sun emits more energy and produces more coronal mass ejections (CMEs), which can result in geomagnetic storms on Earth. These storms can disrupt power grids, satellite communications, and navigation systems. They can also cause beautiful auroras, also known as the Northern and Southern Lights.On the other hand, during the low-activity phase of the sunspot cycle, the sun emits less energy and produces fewer CMEs. This results in a quieter sun and fewer geomagnetic storms. However, it does not mean that the sun is completely inactive during this phase.In conclusion, the sunspot cycle has a significant impact on solar activity, and this activity affects Earth and its technology. Understanding this cycle and its effects is important for predicting and mitigating the potential impact of solar storms.

Learn more about sunspot here

https://brainly.com/question/30699509

#SPJ11

in the adena culture, a ________ was a treasured item that was buried with the deceased?

Answers

In the Adena culture, a gorget was a treasured item that was buried with the deceased.

The Adena culture, which thrived between 1000 BC and 200 AD in the northeastern and midwestern regions of the United States, is renowned for its elaborate burial rituals and exquisite artifacts. Gorgets, which are ornamental, polished stone or shell necklaces, were significant symbols of status and wealth within the Adena society.

These decorative items were skillfully crafted and often featured intricate designs that represented the culture's beliefs and values. Gorgets were typically worn by high-ranking individuals, such as chiefs or spiritual leaders, during their lifetime, and their burial with the deceased signified their importance in the afterlife.

The inclusion of gorgets in Adena burial mounds suggests that they held great value and played a key role in the culture's funerary practices. The elaborate nature of these burial ceremonies highlights the Adena people's belief in the significance of the afterlife and the importance of preserving their heritage through the interment of treasured items.

In conclusion, gorgets were highly valued items in the Adena culture, often buried with the deceased as a testament to their status and wealth. These ornamental necklaces played a crucial role in the culture's burial rituals and offer a glimpse into the belief system and customs of this ancient society.

Learn more about Adena culture here: https://brainly.com/question/17950854

#SPJ11

which of the following describes a primary role of global circulation cells in a planet's atmosphere? group of answer choices they cause air to be diverted into hurricane-like swirls. they create severe weather such as thunderstorms. they keep the poles cold enough to have polar caps. they transport heat from the equator toward the poles.

Answers

The primary role of global circulation cells in a planet's atmosphere is to transport heat from the equator toward the poles. These cells help to distribute heat and maintain the overall temperature balance on the planet, and although they can contribute to weather phenomena like hurricane-like swirls, their main function is heat transport.

Global circulation cells play a crucial role in regulating the climate of a planet by transporting heat from the equator toward the poles. These cells are powered by the differential heating of the planet's surface and the rotation of the planet, and they help to distribute heat and maintain a stable temperature balance. While global circulation cells can contribute to the formation of weather patterns such as hurricanes and cyclones, their primary function is to transfer heat across the planet's surface, influencing the overall climate and weather patterns.

Know more about global circulation cells:

https://brainly.com/question/3505499

#SPJ11

supercell thunderstorms are characterized bydownward-moving winds (called microbursts) along the front of the storm.a strong central updraft that may produce tornadoes.an anvil shape.all of these choices are correct.

Answers

Supercell thunderstorms are characterized by downward-moving winds (called microbursts) along the front of the storm - all of these choices are correct. Therefore the correct option is option D.

Supercell thunderstorms are dangerous thunderstorms that are characterised by a mesocyclone, a persistent rotating updraft that can cause tornadoes, massive hail, damaging winds, flash floods, and other severe weather.

As the rising air in the updraft reaches the tropopause, it spreads out and cools, giving supercells their distinctive anvil shape. In the direction of the predominant wind, this results in the formation of a flat, anvil-shaped cloud top.

Supercells can also produce microbursts, which are powerful downdrafts that can produce harmful straight-line winds close to the surface in addition to the rotating updraft and anvil form.  Therefore the correct option is option D.

For such more question on thunderstorms:

https://brainly.com/question/29808425

#SPJ11

if a mineral has a specific gravity of 3, it must be ________ times as dense as water.

Answers

If a mineral has a specific gravity of 3, it must be 3 times as dense as water.

The specific gravity of a mineral is the ratio of its density to that of water. If a mineral has a specific gravity of 3, it means that it is three times denser than water. This measurement is useful in identifying minerals since each mineral has a unique specific gravity. It is also used in mineral processing to separate minerals from gangue based on differences in their specific gravity. The higher the specific gravity of a mineral, the easier it is to separate it from other minerals using techniques like gravity separation or froth flotation.

You can learn more about mineral at

https://brainly.com/question/15844293

#SPJ11

a place located along a windward coast will probably have ________.

Answers

A place located along a windward coast will probably have high levels of precipitation.

This is due to the fact that windward coasts face the prevailing winds that carry moisture from the ocean onto the land. As the moist air is forced to rise over the coastal mountains, it cools and condenses, resulting in frequent rainfall. This phenomenon is known as orographic precipitation.

The amount of precipitation can vary depending on the region's climate, topography, and prevailing winds. For example, areas along the windward coast of the Pacific Northwest in the United States receive substantial rainfall due to the combination of prevailing westerly winds, coastal mountains, and a moist maritime climate. In contrast, areas along the windward coast of the Hawaiian Islands receive heavy rainfall due to the trade winds carrying moisture from the warm ocean waters.

Overall, areas along windward coasts tend to have lush vegetation, including rainforests and other wetland ecosystems, due to the high levels of precipitation.

For more about precipitation:

https://brainly.com/question/18109776

#SPJ11

a speech style common to an ethnic group or a geographic region is known as a(n) _____.

Answers

A speech style common to an ethnic group or a geographic region is known as a dialect.

Dialects are variations of a language that can differ in vocabulary, grammar, and pronunciation, reflecting the unique linguistic characteristics of a specific group of people or a particular location.

Dialects often develop when people from different backgrounds come together and create a new, shared way of speaking. This linguistic diversity can stem from factors such as historical migration, geographical isolation, or cultural influences. As a result, dialects help to preserve the rich cultural heritage and identity of various communities.

While some dialects might be easily understood by speakers of the standard language, others may be more challenging to comprehend due to significant differences. Nevertheless, dialects play an important role in showcasing the linguistic diversity and historical development of languages around the world.

Learn more about Dialects here: https://brainly.com/question/30573350

#SPJ11

Other Questions
HELP read the picture santiago inc. processes a base chemical into plastic. standard costs and actual costs for direct materials, direct labor, and factory overhead incurred for the manufacture of 78,000 units of product were as follows: line item description standard costs actual costs direct materials 241,800 lbs. at $5.30 per lb. 239,400 lbs. at $5.20 per lb. direct labor 19,500 hrs. at $17.10 per hr. 19,950 hrs. at $17.50 per hr. factory overhead rates per direct labor hr., based on 100% of normal capacity of 20,350 direct labor hrs.: factory overhead variable cost, $4.60 $88,800 variable cost factory overhead fixed cost, $7.30 $148,555 fixed cost each unit requires 0.25 hour of direct labor. required: a. determine the direct materials price variance, direct materials quantity variance, and total direct materials cost variance. enter a favorable variance as a negative number using a minus sign and an unfavorable variance as a positive number. line item description amount variance direct materials price variance $fill in the blank 1 direct materials quantity variance $fill in the blank 3 total direct materials cost variance $fill in the blank 5 b. determine the direct labor rate variance, direct labor time variance, and total direct labor cost variance. enter a favorable variance as a negative number using a minus sign and an unfavorable variance as a positive number. line item description amount variance direct labor rate variance $fill in the blank 7 direct labor time variance $fill in the blank 9 total direct labor cost variance $fill in the blank 11 c. determine the variable factory overhead controllable variance, fixed factory overhead volume variance, and total factory overhead cost variance. enter a favorable variance as a negative number using a minus sign and an unfavorable variance as a positive number. line item description amount variance variable factory overhead controllable variance $fill in the blank 13 fixed factory overhead volume variance $fill in the blank 15 total factory overhead cost variance a party seeking to recover in quasi contract must show that he or she has been unjustly enriched. T/F? foreign-born _____ have highest levels of education in the hispanic population overall. If a buyer, after having a liquidated damages purchase contract accepted, purchases a car which causes the buyer not to qualify for the loan, and if seller does not timely receive written notice to terminate, To simulate blood conditions, a phosphate buffer system with a pH = 7.4 is desired. What mass of Na2HPO4 must be added to 1.25 L of 0.38 M NaH2PO4(aq) to prepare such a buffer? Answer in units of g. At the instant = 60 , the boy's center of mass G is momentarily at rest. Part ADetermine his speed when = 90 . The boy has a weight of 90 lb. Neglect his size and the mass of the seat and cords. Part BDetermine the tension in each of the two supporting cords of the swing when = 90 A piece of production equipment is to be replaced immediately because it no longer meets quality requirements for the end product. the two best alternatives are a used piece of equipment(e1) and a new automated model(e2). the economic estimates for each are shown in the accompanying table.e1 e2capital investment $14000 $65000annual expenses $14000 $9000useful life(yrs) 5 20market value $8000 $13000(at end of useful life)1. which alternative is preferred, based on the repeatablity assumption?2. show, for the coterminated assumption with a five year study period and an imputed market value for alternative b, that the AWof b remains the same as it was in part 1. explain why that occurs in this problem Find, by the method of Lagrange multipliers, the critical points of the function, subject to the given constraint f(x,y)= x + 18y +9 6x - 18y = 30 The critical point(s) of the function is/are ... For in(4x)dx. Part A: Rewrite the integral using substitution as the product of two functions in order to find the antiderivative. (15 points) Part B: Find the antiderivative. (15 points) At the bus station, there are nine lines for arriving passengers, each staffed by a single worker. The arrival rate for passengers is 124 per hour and each passenger takes (on average) 3 minutes for a worker to process. The coefficient of variation for arrival time is 1.4 and the coefficient of variation for service time is 1. (Round your answer to three decimal places.) How much time (in minutes will an average customer spend in queue? minutes at the profit-maximizing level of production, the monopoly in figure 11-20 will have a ___. the oldest person in the world documented by a birth certificate died in 1997 at _____ years old. the sum of the interior angles of a polygon is 720 degrees , calculate (a)the number of sides of the polygon (b) the size of each interior angle a horizontal spring with stiffness 0.5 n/m has a relaxed length of 15 cm. a mass of 20 g is attached and you stretch the spring to a total length of 25 cm. the mass is then released from rest and moves with little friction. what is the speed of the mass at the moment when the spring returns to its relaxed length of 15 cm? transported via the blood to the liver, ____________ is converted to calcidiol. what does the seventh man do when he sees the first wave coming? what does he do when he sees the second wave? when your customer raises an objection during your product presentation, the first thing you should do is: a. thank them and then ignore the objection. b. explain what others have found when they felt that way. c. present another feature and benefit of your product. d. ask questions about the objections An artist has completed 1/4 of a painting in 2 weeks. At what rate is she working? columbus thought he had arrived in ________; however, he actually had arrived in the caribbean.