When inputting a formula into excel or in other spreadsheet software, we need to put equal sign before writing the formula and opening and closing parentheses for the formula.
Spreadsheet software such as excel, go-ogle sheets, or office 365 sheets allows you to perform calculations based on the given formula to perform the calculation. Most common formulas are provided by the spreadsheet softwares, such as sum, average, min, max, difference etc. These built-in formulas also called functions.
However, we can write our own formula to perform specific calculations according to our requirement. The components that are required for formula to function properly; you need to write equal sign “=” before beginning the formula. The second component of the formula is, you must always close the parentheses for any opening parentheses.
For example, if you want to add or do sum, then the formula is”
=sum(range of cells…)
If you want to take an average of a range of numbers, then you can write
=average(range of cells…)
However, you can write your own formula which can have multiple parentheses, for example:
=(A1+B1+(B1/C2)+(B3+(B4/B5)))
You can learn more about spreadsheet formula at
https://brainly.com/question/1395170
#SPJ4
when you arrived at the unit today and listened to the change of shift report, you heard about a patient named jane w. according to the tape-recorded signout, jane "is a 57-year-old woman with abdominal pain and vomiting. she has pain medications ordered p.r.n. [as needed]." during your shift, jane does not request pain medications. near the end of your shift, however, you get a call from jane’s daughter. distraught, she asks why nobody is treating her mother’s pain. when you explain that jane has not requested any pain medications, her daughter exclaims, "but she’s had a stroke! she can’t use the call light! what kind of place are you running over there?"
The transition between providers ("hand-over") have contributed to this situation is option (A) The handoff was too brief and failed to include important information.
What is meant by transition of care?Transition of Care is known to be a term that connote the movement of a patient and this is one that is often done from one setting of care (such as the hospital, ambulatory specialty care to another.
Note that the individuals that are known to be the most affected by transitions of care are the Older people that are known to have a complex health issues and are also those that are very likely to undergo multiple transitions of care.
Therefore, The transition between providers ("hand-over") have contributed to this situation is option (A) The handoff was too brief and failed to include important information.
Learn more about handoff from
https://brainly.com/question/878400
#SPJ1
See full question below
When you arrived at the unit today and listened to the change of shift report, you heard about a patient named Jane W. According to the tape-recorded signout, Jane "is a 57-year-old woman with abdominal pain and vomiting. She has pain medications ordered p.r.n. [as needed]." During your shift, Jane does not request pain medications. Near the end of your shift, however, you get a call from Jane's daughter. Distraught, she asks why nobody is treating her mother's pain. When you explain that Jane has not requested any pain medications, her daughter exclaims, "But she's had a stroke! She can't use the call light! What kind of place are you running over there?"
How might the transition between providers ("hand-over") have contributed to this situation?
(A) The handoff was too brief and failed to include important information.
(B) The handoff was hard to understand.
(C) You weren't paying close attention to the information you were being given.
(D) You had no opportunity for verbal repeat back.
while cleaning the data, you notice there’s missing data in one of the rows. what might you do to fix this problem? select all that apply.
The thing that a person might do to fix this problem is option a and c in the image attached: Ask a college for guidance or ask a supervisor.
What are the causes of missing data?Missing data, or missing values is known to be a term that connote when a person do not possess data stored for some variables or participants.
Note that Data can go missing as a result of an incomplete data entry, equipment issues, lost files, and others.
Therefore, based on the above, The thing that a person might do to fix this problem is option a and c in the image attached: Ask a college for guidance or ask a supervisor.
Learn more about Missing data from
https://brainly.com/question/22521037
#SPJ1
in most large and medium-sized companies, a(n) within the it department is responsible for providing user support.
In most large and medium-sized companies, a help desk, or information center, within the IT department is responsible for providing user support.
What is information technology (IT)?Information technology (IT) can be defined as a field in computer science that typically deals with the use of computer systems to generate, process, store, retrieve, and exchange different types of electronic data and information over a secured network.
In most large and medium-sized business organizations (companies), a help desk or information center, within the Information technology (IT) department is saddled with the responsibility of providing user support to the members working there.
Learn more about information technology here: brainly.com/question/14426682
#SPJ1
Complete Question:
In most large and medium-sized companies, a help desk, or ____, within the IT department is responsible for providing user support.
A: resource center
B: portal
C: information center
D: technology center
Customize this page
Background
Shortcuts
Color and theme
Upload from device
No background
My shortcuts
Shortcuts are suggested based on websites you visit often
Most visited sites
Shortcuts are curated by you
Hide shortcuts
Don't show shortcuts on this page
Cancel
Done
×
Answer:
Does it look like I am a make a wish foundation
write a program that prints the sum of two selected numbers from a line –first line of input contains the number of lines to follow –first number of each line, n>
Using the knowledge in computational language in JAVA it is possible to write a code that prints the sum of two selected numbers from a line.
Writting the code:import java.util.*;
public class Main
{
public static void main(String[] args)
{
// create a Scanner Object
Scanner sc = new Scanner(System.in);
//declare required variables
int number_of_lines, total_numbers;
//take input of number_of_lines
number_of_lines = sc.nextInt();
//initialize array to store the sum of values for each line
int []sum_arr = new int [number_of_lines];
//loop runs to take the numbers as input and calculate their sum
//and store in the array.
for(int i=0;i<number_of_lines;i++)
{
// first take the count of numbers to be inserted in each
//row
total_numbers = sc.nextInt();
// since last two are the indices, create an array with size 2
//less than total_numbers
int [] numbers = new int[total_numbers-2];
//loop to take the numbers into array
for(int j=0;j< total_numbers-2 ;j++){
numbers[j] = sc.nextInt();
}
int sum_of_numbers = 0;
// take the last two indices as input and find
//the values in the numbers array
//then calculate their sum
sum_of_numbers += numbers[sc.nextInt()-1];
sum_of_numbers += numbers[sc.nextInt()-1];
//finally store the sum on an array.
sum_arr[i] = sum_of_numbers;
}
//loop to print the sums
for(int i=0;i<number_of_lines;i++){
System.out.println(sum_arr[i]);
}
}
}
See more about JAVA at brainly.com/question/12978370
#SPJ1
Define the following term:
i) Kernel
What is the additional space complexity of removing an element at the back of a queue with n elements and returning the queue with all other elements in their original order?.
Dequeue() operations take O(1) time to complete. It will take O(N) time to eliminate N elements from the queue (in total). The time required for one enqueue () operation is O(1). The time required to add N elements to the queue is O(N) (in total).
For a single operation, insertion has an O(1) time complexity and deletion, in the worst case, has an O(n) time complexity. Since it still takes O(n) time to delete n elements from the queue, the amortised costs for both are O(1).
In a balanced binary search tree, the time complexity for a single search is O(log(n)). The difficulty of the question may force you to perform n searches in the binary tree, making it O(nlog(n)) in total. A single search in an unbalanced binary search tree has a worst-case complexity of O. (n).
Learn more about queue:
https://brainly.com/question/24275089
#SPJ4
all of the following are new technology-related trends in mis except: group of answer choices the mobile digital platform. iot. big data. co-creation of business value. cloud computing.
The option that is note a new technology-related trends in MIS is co-creation of business value.
Technology and Management Information System:Technology and Management Information System is known to be a term that connote the way a person can know or understand data that is obtained from a lot of units and departments of an organization.
Note that It can be used in the area of integration with other types of technology and as such, The option that is note a new technology-related trends in MIS is co-creation of business value.
Learn more about business value from
https://brainly.com/question/25528419
#SPJ1
2^7suppose an email message has 500 characters. how many bits would a computer use to store that email, using ascii code having 7 bits per character?
If an email message has 500 characters, computer would use 7 bits to store that email.
Each character in the basic ASCII set utilises 7 bits. Each character now has a total of 128 different symbols. But the 8 bits used by the wider ASCII character set. This results in a total of 128 more characters.
The additional character in the 8 bits extended ASCII character contains characters from other languages as well as unique symbols and characters that can be utilised to create drawings and visuals.
The most used character encoding format for text data in computers and on the internet is ASCII (American Standard Code for Information Interchange). There are distinct values for 128 extra alphabetic, numeric, special, and control characters in ASCII-encoded data.
Learn more about bits:
https://brainly.com/question/19667078
#SPJ4
which operating system feature is designed to detect malware that is loaded early in the system startup process or before the operating system can load itself? advanced anti-malware measured boot master boot record analytics startup control see all questions back next question
The operating system feature that is designed to detect malware that is loaded early in the system startup process or before the operating system can load itself is option d: Measured Boot.
What is Measured Boot?Measured boot is known to be one of the feature of operating system where there is known to be a log of all boot work that is said to be taken and saved in a trusted place module for future retrieval as well as analysis by anti-malware software on any kind of remote server.
Note that an operating system (OS) is said to be a kind of a software that is known to helps in the act of operating both hardware as well as the software of any given computer and it also handles all other application programs.
Therefore, based on the above, The operating system feature that is designed to detect malware that is loaded early in the system startup process or before the operating system can load itself is option d: Measured Boot.
Learn more about operating system from
https://brainly.com/question/22811693
#SPJ1
Which operating system feature is designed to detect malware that is loaded early in the system startup process or before the operating system can load itself?
-Master Boot Record Analytics
-Startup Control
-Advanced anti-malware
-Measured Boot
dietary patterns play a role in several of the leading causes of death in the united states. from the following list of the 10 leading causes of death in the united states, click to select the six causes of death for which nutrition plays an important role.
The ones where nutrition plays an important role are heart disease, cancer, stroke, diabetes, Alzheimer's disease, and kidney diseases Cause of death are: chronic lower respiratory diseases, accidents, pneumonia/influenza.
What is known as Dietary patterns ?Dietary patterns is known to be a term that conn defined as “the quantities, as well as the proportions, or combination of different kinds of foods, drinks, as well as nutrients in diets.
Note that it is also made up of the rate with which these food are said to be habitually consumed.
Therefore, The ones where nutrition plays an important role are heart disease, cancer, stroke, diabetes, Alzheimer's disease, and kidney diseases Cause of death are: chronic lower respiratory diseases, accidents, pneumonia/influenza.
Learn more about dietary patterns from
https://brainly.com/question/13724462
#SPJ1
what are the two functions available in the tkinter.filedialog module used to support file access in a gui program?
Asksaveasfilename and askopenfilename the two functions available in the tkinter.filedialog module used to support file access in a GUI program.
There are two functions available in the tkinter.filedialog module that can be used to support file access in a GUI program: asksaveasfilename and askopenfilename.
Asksaveasfilename prompts the user to enter a filename to save a file as, while askopenfilename allows the user to select an existing file to open.
Both of these functions return a string representing the selected filename.
If you're using tkinter to build a GUI application that deals with files, then these two functions will be very useful to you.
Learn more on GUI program here:
https://brainly.com/question/16028777
#SPJ4
you are using linux and need to perform a reverse lookup of the ip address 10.0.0.3. which command would you use to accomplish this? nslookup 10.0.0.3 nbtstat -a 10.0.0.3 dig -x 10.0.0.3 arp 10.0.0.3
A command you would use to perform a reverse lookup of the IP address 10.0.0.3 on a Linux system: dig -x 10.0.0.3.
What is a Linux command?A Linux command can be defined as a software program that is designed and developed to run on the command line, in order to enable an administrator (end user) of a Linux network perform both basic and advanced tasks by only entering a line of text.
What is IP address?IP address is an abbreviation for Internet protocol address and it can be defined as a unique set of numbers that are assigned to a computer, website or other network devices, in order to successfully differentiate them from one another in an active network system.
In Computer Networking, a command which an administrator (end user) would use to perform a reverse lookup of the IP address 10.0.0.3 on a Linux system is dig -x 10.0.0.3.
Read more on Linux commands here: brainly.com/question/25480553
#SPJ1
If you were to combine blue and orange, this would be an example of:
Question 11 options:
combining two primary colors to get a secondary color.
combining a primary and a secondary color to get a tertiary color.
combining two secondary colors to get a primary color.
combining two tertiary colors to get a secondary color.
Answer:
the combination of two complimentary colors(sit opposite on the color wheel to each other) or a primary and secondary color to get a tertiary color! hope this helps!
if you’re using the chrome browser and a javascript application stops running due to an error in the javascript code, you can view the statement that caused the error by first pressing f12. then, you can
A person can be able to identify the statement that caused the error by option d: pressing F12 and reviewing the code in the Sources panel.
What is the Chrome about?The chrome is known to be a type of a Web browser that is known to be found across a lot of platform web browser.
Note that it was said to have been first released in 2008 for Microsoft Windows, as it was said to have been created with the use of free software components.
Therefore, A person can be able to identify the statement that caused the error by option d: pressing F12 and reviewing the code in the Sources panel.
Learn more about browser from
https://brainly.com/question/4116298
#SPJ1
If you’re using the Chrome browser and a JavaScript application stops running due to an error in the JavaScript code, you can identify the statement that caused the error by
a. pressing F12, clicking on the link in the Sources panel, and reviewing the code in the Console panel
b. pressing F12, clicking on the link in the Console panel, and reviewing the code in the Sources panel
c. pressing F12 and reviewing the code in Console panel
d. pressing F12 and reviewing the code in the Sources panel
you create a hash link by assigning unique names to elements in your web page using the html attribute.
When creating a hash link, you assign a unique name to an element on your web page using the HTML id attribute. This allows you to link directly to that element, making it easier for users to navigate your site.
To create a hash link, simply add the id attribute to the element you want to link to. For example, if you wanted to link to an element with the id "main-content", you would add the following code:
Main Content
When a user clicks on this link, they will be taken directly to the element with the id "main-content". This can be particularly useful if you have a long page with multiple sections.
Hash links are a great way to improve the usability of your site. They can help users find the information they need quickly and easily.
Learn more on Hash links here:
https://brainly.com/question/13527630
#SPJ4
which software is added to the browser (or other program) to provide a capability that is not inherent to the browser
A software which is added to the web browser (or other program) to provide a capability that is not inherent to the browser is generally referred to as a browser extension.
What is a web browser?A web browser can be defined as a type of software application (program) that is designed and developed to enable an end user view, access and perform certain tasks on a website, especially when connected to the Internet.
What is a browser extension?A browser extension is also referred to as a plugin and it can be defined as an extra software application that is (manually) added by an end user to the web browser or other software program, in order to provide a capability that is not present in the web browser. Some examples of a browser extension include the following:
Readability Awesome Screenshot StayFocusdEvernote Web ClipperBufferRead more on web browsers here: brainly.com/question/28088182
#SPJ1
what is "tracing" on a
PCB? why is it important?
Answer: Tracing of PCBs (printed circuit boards) is an important, time-consuming and also complicated process of finding out the mounting locations of conductors and wiring their interconnections to the dielectric plate of the board. You should know the requirements of the specification, current standards, optimal parameters, and as well as restrictions.
To use analytics to collect website data, what must be added to the website page html?.
Answer:
Analytics Tracking Code
Hello guys where's bios chip in this motherboard help me
Answer:
Explanation:
Hey there!
Do you see the lower corner?
on the right beside the anti surge thingy
its rectangular, its also black from the center its here
in your online presentation you use a video clip. it's obvious from the clip who the speaker is and the context of the video. do you need to cite where you retrieved the clip?
No, you don't need to cite where you retrieved the clip if it's obvious from the clip who the speaker is and the context of the video.
When using video clips in online presentations, it is not always necessary to cite the source. If the clip is clearly from a recognizable source (such as a well-known TV show or movie), and the context is clear, then a citation is usually not needed.
However, if the clip is from a less well-known source, or if the context is not clear, then it is always best to cite the source. This will ensure that your audience can easily find the original video, and will also help to avoid any potential copyright issues.
Learn more here:
https://brainly.com/question/735700
#SPJ4
Which of the following types of digital evidence can be pulled from both a computer and a portable device?
Images
Text history
GPS coordinates
phone call data
The types of digital evidence that can be pulled from both a computer and a portable device are:
Text historyImagesGPS coordinatesWhat type of evidence can be identified and collected from digital devices?These are known to be Evidence that can be obtained Digitally. They includes:
Computer documentsEmailsText and instant messages,TransactionsImages Internet histories, etc.The above are all examples of information that can be obtained from electronic devices and can be used very well as evidence.
Therefore, The types of digital evidence that can be pulled from both a computer and a portable device are:
Text historyImagesGPS coordinatesLearn more about digital evidence from
https://brainly.com/question/18566188
#SPJ1
Answer:
(A) Images
Explanation:
Got it right on my quiz.
The attachment should help you understand why its Images.
Q1 Give two examples of print () that will lead to errors.
Answer:
print(a') print(endl<<)
Explanation:
These are two different statements of print() function which will lead to error because in the first example we have passed the variable with a closing quotation mark and in the second we are passing the manipulator to the function body which will also lead to error.
you are working on shortening the time it takes patients with chest pain to get to the cardiac catheterization lab in your hospital. your aim is to have 90 percent of patients brought to the lab within 45 minutes of arrival to the hospital. you decide to try a care protocol that another hospital in the area implemented with great success. the care protocol was successful at the other hospital. why would it be important to test this proven change at your hospital?
It would be important to test this proven change at your hospital: Because this change may not be as effective in your hospital.
Changes that are successful in one complicated system might not be successful at all—or even at all—in another. Testing the modifications is the only way to be certain.
Testing "proven" improvements is also recommended to assess expenses, reduce opposition, raise buy-in, and boost your own confidence that the change would improve your setting.
-during the "s" phase of your subsequent pdsa cycle:
S is an acronym for "study." In this stage, you review the information amassed during the "Do" phase. The "Plan" step includes planning for implementation, while the "Do" step includes recording results. Thinking about how to disseminate the PDSA cycle does not include.
Learn more about hospital:
https://brainly.com/question/27126420
#SPJ4
Do you think smartphones will be useful in 5 years?
Will smartphones still be useful or do you think something else will replace them? Why?
How will smartphones be useful in 5 years?
Answer:
Yes
Explanation:
In five years it will not be possible for smartphones to become useless and even though something else comes up it will have to grow gradually before it can be popular and this can hardly happen in five years
within a css style rule, a property declaration includes group of answer choices a property and a selector a property and a value a selector and a value a selector and a declaration block
Within a CSS style rule, a property declaration includes: B. a property and a value.
What is CSS?CSS is an abbreviation for Cascading Style Sheets and it can be defined as a style sheet programming language that is designed and developed for describing and enhancing the presentation of a webpage (document) that is written in a markup language such as:
XMLHTMLWhat is HTML?HTML is an abbreviation for hypertext markup language and it can be defined as a standard programming language which is used for designing, developing and creating websites or webpages.
In Computer programming, a CSS style rule can be applied to one or more target HTML elements and it must contain a set of CSS properties and a CSS selector. Also, a property declaration includes a property and a value.
Read more on CSS style rule here: https://brainly.com/question/14376154
#SPJ1
windows server 2016 standard and datacenter both support the use of , which allows for the addition of memory without shutting down a server.
Windows Server 2016 Standard and Datacenter both support the use of hot-add, which allows for the addition of memory without shutting down a server.
This is a great feature for businesses that need to keep their servers up and running at all times. With hot-add, businesses can add more memory to their servers without having to shut them down, which can save a lot of time and money.
If you're running a Windows Server 2016 machine, you may be wondering whether you should go with the Standard or Datacenter edition. Both editions support the use of hot-add, which allows for the addition of memory without shutting down a server.
Learn more on Windows Server 2016 here:
https://brainly.com/question/14881784
#SPJ4
a controlled experiment is one that: select an answer and submit. for keyboard navigation, use the up/down arrow keys to select an answer. a has many variables b eliminates a key variable c enables personal opinions d is impossible to achieve
A controlled experiment is one that: C. enables personal opinions.
What is a control experiment?A control experiment can be defined as a type of experiment in which a condition assumed to be a probable cause of an effect is compared with the same situation without involving or using the suspected condition.
This ultimately implies that, all factors are held constant in a controlled experiment except for the independent variable.
What is a treatment group?A treatment group can be defined as a a group of participants in an experiment that are exposed to some manipulation in the independent variable such as an administration of medication to a particular group.
In this context, we can reasonably infer and logically deduce that a controlled experiment is one that enables personal opinions.
Read more on controlled experiment here: https://brainly.com/question/17515101
#SPJ1
during the course of administration of an investigational drug, the following events occur: on day 7, subject 603 has an unexpected stroke that requires hospitalization. on day 15, subject 415 complains of nausea, vomiting, and headache relieved by aspirin. on day 21, subject 20 has brief dizzy spells upon trying to stand. an ind safety report is most likely filed by the sponsor with the fda for the observations associated with:
An IND Safety Report would be most likely filed by the sponsor with the FDA for the observations associated with: subject 603 only.
What is FDA?FDA is an abbreviation for Food and Drug Administration and it can be defined as a federal agency of the government of the United States of America that is saddled with the responsibility of protecting the consumers of drugs and other edible products from hazards (poisons), as well as promoting and enhancing public health safety.
What is an IND Safety Report?IND Safety Report is a short terminology for Investigational New Drug Safety Report and it can be defined as any findings from tests that are conducted in the laboratory on animals which suggest a significant risk for human subjects, when the drug is used.
Based on the information provided, we can reasonably infer and logically deduce that an Investigational New Drug (IND) Safety Report would be most likely filed by the sponsor with the Food and Drug Administration (FDA) for the observations associated with subject 603 only because it suggest a higher and significant risk for human subjects.
Read more on IND Safety Report here: https://brainly.com/question/28084797
#SPJ1
when a single network server can't handle all the data processing requests, more servers can be added and joined together to create a . choose all that apply, then click done.
what are the answer choices??