Answer:
Distance
Explanation:
Gravity is indirectly related to distance. This means if distance increases, gravitational pull decreases.
A light bulb uses 40.0 W of power when connected to a 110 V (DC) outlet. If the same bulb is connected to a European 220 V outlet, how much power will the bulb use?
If the bulb's resistance doesn't change, the power it uses is proportional to the square of the voltage. So doubling the voltage quadruples the power.
On 220 V, the bulb uses (4 • 40w)= 160 W.
It glows very brightly.
For a very short time.
Because it also gets very hot, and burns out.
After a few seconds, it uses zero watts.
Answer:
160
Explanation:
Acellus
câu 1 vẽ sơ đồ trình bày nguyên lý làm việc các thông số và đặc điểm của mạch chỉnh lưu cầu 1 pha
câu 2 vẽ sơ đồ trình bày nguyên lý làm việc của bộ nghịch lưu áp 1 pha
Answer:gang gang father gang
Explanation:idek cuh
SOMEONE HELP ASAP!!!!!
why would the addition of electrons to the hadrons (protons and neutrons) allow for a 'stable and electrically neutral' environment?
Answer:
According that theory protons and neutrons have a strong force charge. ... Electrons are not affected by the nuclear strong force. Without a source for this additional energy the neutron cannot decay. Hence the neutron in a deuteron is stable.
The addition of electrons to the hadrons would allow for a 'stable and electrically neutral' environment due to electromagnetic attraction between electrons and protons and nuclear attraction between neutrons and protons.
To find reason, we need to know about electromagnetic force and nuclear force.
What is electromagnetic force?Electromagnetic force is a combination of electric force and magnetic force.It's a type of physical interaction that occurs between electrically charged particles.It's attractive if the charges have opposite charges and is repulsive if they have similar charges.So, the electrons and protons are attracted towards each other due the electromagnetic force.What is nuclear force?Nuclear force is found between nucleons (i.e. between protons or between proton and neutron or between neutrons).It's a short range force. Means it's dominated only when the separation between the nucleons is in the fermi range. It's always attractive force.So, the protons and neutrons are attracted due the nuclear force.Thus, we can conclude that the addition of electrons to the hadrons would allow for a 'stable and electrically neutral' environment due to electromagnetic attraction between electrons and protons and nuclear attraction between neutrons and protons.
Learn more about nuclear force here:
https://brainly.com/question/8695581
Learn more about electromagnetic force here:
https://brainly.com/question/13745767
#SPJ2
who is george washington? what does he do for america?
George Washington was an American political leader, military general, statesman and Founding Father of the United States, who serves as the first president of the United States from 1789 to 1797.
During the American Revolution, the led the colonial forces to victory over the British and became a national hero. In 1787, he was elected president of the convention that wrote the U.D. constitution. Two years later, Washington became the America's first president.
If a car goes down Lake at 30 miles per hour how far will it go in 0.25 hours?
Answer:
7.5 miles
Explanation:
0.25 hours=15minutes.
So you do
30 miles=60minutes
x =15minutes
cross multiply
Ans-7.5
Compare the movement of four cars. Car A covered a distance of 60 km in 1hr.
Car B covered a distance of 30 km in 30 minutes. Car C covered a distance of 20
km in 15 minutes, Car D covered a distance of 10 km in 7 minutes, which car had
the highest velocity?"
Answer:
car D
Explanation:
1) before to compare all the values of the velocities, they must be in the same units of measurement. It means:
for car A: V=60km / 1h=60km/h;
for car B: V=30km / 0.5h=60km/h;
for car C: V=20km / 0.25h=80km/h;
for car D: V=10km / (7/60)h≈85.7km/h.
2) according to the values calculated in item 1 the car D had the highest velocity.
Answer:
Below
Explanation:
We can use this formula to find the velocity of an object
velocity = displacement / change in time
*note I converted all distances to meters and all times to seconds, its not necessary though**
CarAvelocity = 60,000 m / 3600 sec
= 16.66667 m/s
CarBvelocity = 30,000 m / 1800 sec
= 16.66667 m/s
CarCvelocity = 20,000 m / 900 sec
= 22.2222 m/s
CarDvelocity = 10,000 m / 420 sec
= 23.80952 m/s
Therefor, car D has the highest velocity
Hope this helps!
Question 4 A car of mass 820 kg has a maximum power or 30 kW and moves against a constant resistance of motion to 910 N. Calculate the maximum speed of the car in the following situation On ground level ?
[tex]p = fv \\ v = p \div f \\ 30 \div 910 = [/tex]
Explanation:
power = force × velocity
velocity=power/force
=(30×1000)/910
=32.97m/s
The correct answer is 32.97m/s.
How to calculate the maximum speed?By using the formula:
power = force × velocity
velocity = power / force
= (30×1000)/910
= 32.97m/s
The answer is 32.97m/s.
What is maximum speed physics?
Maximum speed is the highest rate of speed an athlete can attain. Acceleration refers to velocity, and because velocity has both a magnitude and direction associated with it, acceleration changes when athletes change the magnitude of their motion (how fast they are running), the direction of their motion, or both.
Learn more about speed here: brainly.com/question/4931057
#SPJ2
Um caminhão de entregas transporta produtos de tamanho e peso elevados, o que requer o uso de máquina simples para facilitar a descarga (observe a figura abaixo).
Que máquina simples é representada por essa figura?
(A) Roldanas.
(B) Alavancas.
(C) Rodas e eixos.
(D) Plano inclinado.
What is the relationship between the energy of the system, the energy of the surroundings, and the energy of the universe
Answer: see below:
The universe experiences the opposite energy change as the surroundings to keep the total energy of the system constant. The energy of the system, surroundings, and universe must be equivalent. The energy of the universe must remain 0, so the energy of the system and surroundings cannot change. I reaaallly hope this helped, luv ya, have a nice day!! <333
9. Which arrow or arrows indicate a process that cycles carbon from
living or nonliving organisms? Describe the process or processes
you selected. Arrow |
10. Which arrow or arrows represent reactions that demonstrate a
conservation of mass and energy? Explain your answer.
Answer:
arrow E represents cycling of carbon from living organisms to non-living organisms. this is because it is showing conversion of a carbon from the dead tree to fossil fuel.
________________________________________________________
Darkspirit :)
By how many times will the kinetic energy of a body increase if its speed is tripled? Show by calculation.
Answer:
9 times more kinetic energy
Explanation:
KE₀ = ½mv²
KE₁ = ½m(3v)² = 9(½mv²) = 9KE₀
hey friends give me the solution to attachment
Answer:
downwards bro now dodododododdodo
Answer:
[tex]vertically \: downward \\ to \: the \: cenre \: of \: earth \\ thank \: you[/tex]
Why is evolution called a scientific theory?
Answer:
Explanation:
Evolution is both a fact and a theory. Evolution is widely observable in laboratory and natural populations as they change over time. The fact that we need annual flu vaccines is one example of observable evolution. At the same time, evolutionary theory explains more than observations, as the succession on the fossil record. Hence, evolution is also the scientific theory that embodies biology, including all organisms and their characteristics. In this paper, we emphasize why evolution is the most important theory in biology. Evolution explains every biological detail, similar to how history explains many aspects of a current political situation. Only evolution explains the patterns observed in the fossil record. Examples include the succession in the fossil record; we cannot find the easily fossilized mammals before 300 million years ago; after the extinction of the dinosaurs, the fossil record indicates that mammals and birds radiated throughout the planet. Additionally, the fact that we are able to construct fairly consistent phylogenetic trees using distinct genetic markers in the genome is only explained by evolutionary theory. Finally, we show that the processes that drive evolution, both on short and long time scales, are observable facts.
The evolutionary theory is a scientific theory because its assumptions are well sustained by scientific data.
Scientific data refers to the body of knowledge obtained by using the scientific method.A scientific theory is a well-sustained explanation of one or more questions of the natural world, which was repeatedly tested and verified by using the scientific method.The theory of evolution by natural selection is a theory because it has been repeatedly corroborated through the scientific method.In conclusion, the evolutionary theory is a scientific theory because its assumptions are well sustained by scientific data.
Learn more in:
https://brainly.com/question/11555274
Define limitations in an experiment
Answer:
The limitations of the experiment are those characteristics of design or methodology that impacted or influenced the application or interpretation of the results of your study.
Elastic and inelastic collisions
Explanation:
A perfectly elastic collision is defined as one in which there is no loss of kinetic energy in the collision. An inelastic collision is one in which part of the kinetic energy is changed to some other form of energy in the collision.
(1) A man of mass 50 kg stands in a lift. Calculate the reaction of the floor of the lift on the man when the lift moves with an acceleration of 2 ms2 (a) upwards: (B) downwards. [Take g = 10.0 m 5-2 ]
Answer:
use formula a equal to v-u by t
which part of vernier caliper is used to measure external diameter of cylinder?
[tex]{\huge{\pink{↬}}} \: \: {\huge{\underline{\boxed{\bf{\pink{Answer}}}}}}[/tex]
The lower jaws present in the vernier callipers is used to measure the external diameter or thickness of pencils etc...
A ball rolls down the street 9 meters in 3.5 seconds, what is it's average speed?
How do we find the Average Speed ?
The Average Speed is the distance traveled for the object, divided by the elapsed time taken to travel that distance, so the formula is :
S = D / T
where S = Average Speed, D = Distance, and T = Times
Here the object is the ball, the distance is 9 meters and the time elapsed for the ball to roll down the street is 3.5 seconds. Applying the formula we get :
S = 9 / 3.5 ≈ 2.6 metres per second
The ≈ symbols (which is the wavy equal sign) means we can't write the exact result, because there is an infinite quantity of numbers after the decimal point. So we need to give an approximation, since the result is 2.57142857142857...etc. we choosed to round up the result to 2.6.
Which is the absolute location of St. Louis, Missouri?
38 ½° N, 90 ½° W
near the border of Missouri and Illinois
southwest of Chicago, Illinois
42° N, 100° W
Map of U S showing Iowa, Illinois, Indiana, Missouri, Kentucky, Chicago, Indianapolis, Saint Louis, forty degrees North, and ninety degrees West
Answer:
The first is the closest in absolute values.
The second two are vague and the last is approximate.
What is the formula for the speed of an object, using distance and time? In m/s.
The answer you are looking for is S=D/T, which is the formula.
It is also read as Speed=Distance/Time, or Speed=Distance divided by Time.
The "S" stands for "Speed."
The "D" stands for "Distance."
The "T" stands for "Time."
I hope this has helped answer your question. Enjoy your day, and take care.
Answer:
The formula is S=D/T.
Explanation:
by what factors does the speed of the elctron exceed that of the proton?
Answer:
» An electron is lighter than a proton.
explanation:
[tex]{ = \: \sf{an \: electron \: has \: formula \: \: }}{ \bf{ {}^{0}_{ - 1}e }}[/tex]
hence it's mass number is zero
[tex]{ = \: \sf{an \: electron \: is \: helium \: particle \: \: }}{ \bf{ {}^{4} _{2}He }}[/tex]
hence it's mass number is 4
Therefore, proton is heavier than electron
» An electron has a small charge magnitude than a proton.
Explanation:
An electron has charge of -1 while proton has charge of +2, therefore electron is less deflected by any energetic fields than a proton
Who wants to do my physics work for 90?
Answer:me
Explanation:I do
You shake a bottle of soda and take off the cap. If the soda shoots out of the
bottle with a velocity of 17 m/s, how high will it go?
A. 16.9 m
B. 14.7 m
C. 10.6 m
D. 12.2 m
Answer: B) 14.7 meters
============================================================
Explanation:
The bottle cap is a projectile, so we'll use the aptly named projectile formula
That formula (the meters version of it anyway) is approximately
h = -4.9t^2 + v*t + s
where,
t = elapsed time in secondsh = height at time tv = starting velocitys = starting heightWe'll assume that s = 0, though realistically it's probably going to be a bit larger than this (since the person is holding it above the ground). For the sake of simplicity, we'll stick with s = 0.
We're told that the initial velocity is 17 m/s, which means v = 17.
All of that means the formula mentioned earlier updates into this:
h = -4.9t^2 + 17t
If we were to graph this, or apply the -b/(2a) formula, then you should find that the vertex occurs when t = 1.73469 approximately.
Plug this into the equation we found to get...
h = -4.9t^2 + 17t
h = -4.9(1.73469)^2 + 17(1.73469)
h = 14.7449
h = 14.7
The bottle cap will reach a peak height of approximately 14.7 meters and does so at around the 1.7 second mark. The total flight time is approximately 2*1.7 = 3.4 seconds. This all assumes that the starting height and ending height are both 0 meters off the ground.
The soda will go as high as 14.7 meters. Therefore, option (B) is correct.
What is the conservation of energy principle?We can solve this problem using the conservation of energy principle, which states that the initial energy of a system is equal to the final energy. At the start, the soda in the bottle has some potential energy due to its position and kinetic energy due to its motion. When the soda shoots out of the bottle, it converts all of its initial energy to potential energy as it reaches its maximum height.
Using the conservation of energy, we can write:
Initial energy = Final energy
[tex]0.5 * m * v^2 = m * g * h[/tex]
where m is the mass of the soda, v is its velocity, g is the acceleration due to gravity ([tex]9.8 m/s^2[/tex]), and h is the height it reaches.
Solving for h, we get:
h = [tex](v^2)/(2g) = (17^2)/(29.8)[/tex]= 14.7 m
Therefore, the soda will go as high as 14.7 meters. Option B is correct.
Learn more about the conservation of energy principle, here:
https://brainly.com/question/16881881
#SPJ7
name one instrument use to determine the atmospheric pressure
Answer:
Explanation:
A barometer is a scientific instrument used to measure atmospheric pressure, also called barometric pressure.
Answer:
Barometer
Explanation:
Its units are atmospheres (atm) or bars.
Visible light travels at a speed 3.0 × 108 of m/s. If red light has a wavelength of 6.5 × 10–7 m, what the frequency of this light?
Answer:
speed /wavelength = frequency
f = 3×10*8 /6.5×10*7
f = 4.62
Read the following paragraphs, then answer the question on the right.
After handling contaminated dog food, fourteen people in nine states became ill from salmonella. According to the Centers for Disease Control and Prevention (CDC), the people who got sick had given that same contaminated dog food to their pets. At least five people were taken to a hospital, but the incident did not affect any of their dogs.
When people handle contaminated pet food and do not wash their hands well before eating or handling food, they can become ill with salmonella.
The plant that made the dog food was closed while the issue was investigated. The same plant had made food that was recalled by the pet food company four different times in the previous five months. Upon reopening the plant, the company issued a statement that it had taken action to fix the problems.
The cause of the illness was?
A.Not washing hands
B.Salmonella on dog food
C.Unknown
Answer:
i think the answer was
B.Salmonella on dog food
The cause of the illness was Salmonella on dog food, therefore the correct answer is option B.
What is science?Science is the methodical, empirically-based pursuit and application of knowledge and understanding of the natural and social worlds.
As stated in the article, the dog food manufacturing facility was shut down while the situation was looked into.
Four times in the preceding five months, the pet food manufacturer had to recall food that was produced at the same factory.
The business said in a statement after reopening the facility that it has taken steps to address the issues caused by Salmonella in dog food.
Thus, the cause of the illness was Salmonella on dog food, therefore the correct answer is option B.
Learn more about the science here,
https://brainly.com/question/18186842
#SPJ2
How do I describe the movement of a student walking at fore say 10 M/S on a velocity time graph from 5-10s? So like starting at 5 seconds to 15 seconds the student is at 10 meters and stays there until after 15 seconds. how do i describe that? How far did the student walk? Please answer
It means The student walked for 5s with a velocity of 10m/s
Distance=Velocity(Time)
[tex]\\ \rm\longmapsto Distance=10(5)[/tex]
[tex]\\ \rm\longmapsto Distance=50m[/tex]
Answer:
[tex]\sf\longmapsto \: 50 \: metres[/tex]
Explanation:
Given,
Velocity is 10m/s
Let us find the time:
[tex]\sf\longmapsto \: 10 - 5[/tex]
[tex]\sf\longmapsto \: 5 \: seconds[/tex]
Now,We know that Distance = Velocity × Time
[tex]\sf\longmapsto \: 10 \times 5[/tex]
[tex]\sf\longmapsto \: 50 \:metres[/tex]
I'm completely stumped as to how to do this.
I know the components of f1 are f1x= 1600, f1y=0, f2x= 433 f2y=250 and f3x= 467
Explanation:
You have already determined the components of the known forces so I won't repeat your work here. Since the resultant force [tex]\vec{\textbf{R}}[/tex] and F1 are completely along the x-axis, we can conclude that
[tex]F_{2y} = F_{3y} \Rightarrow F_{3y} = F_3\cos{\theta} = 250\:\text{lb}[/tex]
We can now solve for the magnitude of [tex]F_3:[/tex]
[tex]F_3 = \sqrt{F_{3x}^2 + F_{3y}^2} = \sqrt{(467)^2 + (250)^2}[/tex]
[tex]\:\:\:\:=529.7\:\text{lb}[/tex]
The angle [tex]\theta[/tex] is then
[tex]\tan{\theta} = \dfrac{F_{3y}}{F_{3x}} = \dfrac{250}{467}[/tex]
or
[tex]\theta = 49.2°[/tex]
The circled one please
Mark brainliest!!
Answer:
50µs
Explanation:
The conversion is that 1 second equals 1,000,000 micro seconds. Since we have 0.00005 seconds, we will multiply that to a million.
0.00005 * 1,000,000 = 50µs
Keep in mind that 50 only has 1 significant figure because any trailing zeroes before the decimal point do NOT count.
Best of Luck!
0.00005 seconds = 50 μs
Thank you
What is scintillator
Answer:
Scintillators are materials that transform high-energy radiation like X-rays or gamma-rays into visible light or near-visible light. They're commonly utilized in medical diagnostics, high-energy physics, and geophysical exploration as detectors.
Explanation:
i hope this helps