when a mass m is hung on a certain ideal spring, the spring stretches a distance d. if the mass is then set oscillating on the spring, the period of oscillation is proportional to

The charge in the section of the line of length 1.70 cm is:$$Q = (1.70 × 10⁻² m) * (2.16 × 10⁻⁵ C/m) = 1.277 × 10⁻⁷ C

The electric field 0.300 m from a very long uniform line of charge is 850 n/c. How much charge is contained in a section of the line of length 1.70 cm? The answer is 1.277 × 10⁻⁷ C. Explanation: To begin, let's consider the electric field due to an infinite line of charge. The electric field generated by a uniformly charged infinite line of charge is given by:$$E = \frac{λ}{2πεr}$$where, E is the electric field, λ is the linear charge density (charge per unit length), r is the distance from the wire, and ε is the permittivity of free space. To begin with, we can rearrange the equation for electric field:$$λ=\frac{2πεrE}{l}$$Where, l is the length of the line section of interest, E is the electric field at the distance r from the line of charge, and λ is the linear charge density. Now we can plug in the given values:$$(1.70 cm)λ = Q$$$$λ=\frac{2πεrE}{l}$$λ = (2π * 8.85 × 10⁻¹² F/m) * (0.300 m) * (850 N/C) / (0.0170 m)λ = 2.16 × 10⁻⁵ C/mSo, the charge in the section of the line of length 1.70 cm is:$$Q = (1.70 × 10⁻² m) * (2.16 × 10⁻⁵ C/m) = 1.277 × 10⁻⁷ C$$Therefore, 1.277 × 10⁻⁷ C.

Learn more about Charge line of length

brainly.com/question/14433096

#SPJ11

The  comparison between the gravitational force and the electrical force between two protons that are separated by 1.2 x 10-15 m is 4.47 * 10⁻⁴⁰

Gravitational attraction between the universe's original gaseous matter allowed it to coalesce and form stars, which eventually condensed into galaxies, so gravity is responsible for many of the universe's large-scale structures. Gravity has an infinite range, but its effects weaken as objects move further away. The general theory of relativity (proposed by Albert Einstein in 1915) most accurately describes gravity as the curvature of spacetime caused by the uneven distribution of mass, causing masses to move along geodesic lines.

using the formula

F = G [tex]\frac{M1 * M2}{R * R}[/tex]

FORCE COMES OUT TO BE ;

4.47 * 10⁻⁴⁰

TO know more about gravitational force , visit ;

brainly.com/question/12528243

#SPJ1

An alternative piece of evidence that supports the idea that solar energy could play a part in solving the energy crisis is the fact that it is a clean and renewable source of energy. This means that it does not contribute to pollution and it will not run out anytime soon.

The solar energy is renewable energy because:

To learn more about the renewable energy: https://brainly.com/question/79953

#SPJ11

The tension in the string of a 1.85 kg package held by a light vertical string will depend on the acceleration of the elevator. When the elevator accelerates, the force of acceleration on the package will be equal and opposite to the tension in the string, causing the tension to increase.

The equation for tension in a string is:

Tension = Mass x Acceleration

Therefore, in this case, the tension in the string is equal to 1.85 kg x Acceleration.

If we assume that the acceleration of the elevator is a constant rate, then the tension in the string can be calculated by multiplying the mass of the package by the acceleration of the elevator.

To sum up, the tension in the string of a 1.85 kg package held by a light vertical string will depend on the acceleration of the elevator. If the acceleration of the elevator is a constant rate, then the tension in the string can be calculated by multiplying the mass of the package by the acceleration of the elevator.

For more such questions on Tension.

https://brainly.com/question/13397436#

#SPJ11

The total lifetime of the Sun is estimated to be about 10 billion years.

It is currently about 4.6 billion years old, so it has roughly 5 billion years left until it exhausts the hydrogen fuel in its core and starts to evolve into a red giant. During the red giant phase, the Sun will expand to a size that may reach beyond the current orbit of Earth and will become much brighter. This phase is expected to last for about 1 billion years.

Eventually, the Sun will shed its outer layers and become a compact, hot object known as a white dwarf. This final phase is expected to last for trillions of years. So in total, the Sun's lifetime is estimated to be about 10 billion years until it exhausts its fuel and starts to evolve, and then trillions of years as a white dwarf.

To know more about sun, here

brainly.com/question/2526507

#SPJ4

The magnification of a telescope can be calculated using the following formula: magnification = (objective lens diameter / eyepiece focal length). In this case, the magnification is (300mm / 10mm) = 30x.

The magnification of a telescope is determined by the ratio of the focal length of the objective lens to the focal length of the eyepiece. In this case, the objective lens has a diameter of 300 mm and a focal length of 300 mm, and the eyepiece has a focal length of 10 mm. Therefore, the magnification of the telescope is 30x. To calculate this, we can use the following formula:

Therefore, in this case, the magnification of the telescope is: Magnification = 300 mm / 10 mm = 30x

In conclusion, the magnification of the telescope is 30x.

For more questions related to magnification.

https://brainly.com/question/28957672

#SPJ11

The average mass of the skiers is 66.0 kg. The power output of the motor is 4.70 kw. The maximum speed at which the skiers can be towed is 4.21 m/s.

Since there are 10 skiers, the total mass is:

M = 10m = 10(66.0 kg) = 660.0 kg

The force exerted by the tow rope is:

F = Mg sin([tex]\theta[/tex])

F = (660.0 kg)(9.81 m/s^2) sin(8.5 degrees)

F = 1117.9 N

Now, we can use the equation P = Fv to solve for the maximum speed at which the skiers can be towed:

v = P/F

v = (4.70 kW)/(1117.9 N)

v = 4.21 m/s

Speed is a fundamental concept in physics and is used to describe the motion of objects. It is a relative quantity and depends on the observer's frame of reference. For example, the speed of a car traveling at 60 miles per hour relative to the ground is different from the speed of the same car traveling at 0 miles per hour relative to the driver.

Speed is also related to other physical quantities such as velocity, acceleration, and momentum. Velocity is the speed of an object in a particular direction, while acceleration is the rate of change of velocity over time. Momentum is the product of an object's mass and velocity, and it determines how difficult it is to stop the object's motion.

To learn more about Speed visit here:

brainly.com/question/28224010

#SPJ4

G2-type stars take the longest time, while O9-type stars take a shorter time to go from a protostar to a main-sequence star during the formation process.

Based on the spectral types provided, the order of the stars from the longest to the shortest time taken to go from a protostar to a main-sequence star during the formation process is as follows:
1. G2
2. O9
- Stars with lower masses, like G2-type stars, take longer to form because they have a lower rate of fusion and lower pressure at their cores.
- On the other hand, O9-type stars have a higher mass, which results in a higher rate of fusion and higher pressure at their cores.

This means they will form faster than G2-type stars.

For similar question on protostar.

https://brainly.com/question/891408

#SPJ11

The wavelength at which the brown dwarf will emit the most radiation at a wavelength of 1932 nm (nanometers).

Wien's law formula is:

λmax = b/T

where λmax is the wavelength at which the object emits the most radiation.

b is Wien's constant which is equal to 2.898 × 10^-3 m K and T is the temperature of the object in Kelvin.

To calculate the wavelength at which the brown dwarf will emit the most radiation,

surface temperature of 1500 K=

λmax = b/T

         = 2.898 × 10^-3 m K / 1500 K

         = 1.932 × 10^-6 m

         = 1932 nm

To know more about Wien's law:

https://brainly.com/question/28480860

#SPJ11

The two limiting cruising altitudes usable on V343 for a VFR-on-top flight from DBS VORTAC to Raney Intersection are 6,000 feet and 14,000 feet.

VFR-on-top is a type of flight that must remain in visual meteorological conditions (VMC) and must not exceed the airspace altitude limitations. The airspace altitude limitations along V343 from DBS VORTAC to Raney Intersection are 6,000 feet and 14,000 feet.

To find out the limiting cruising altitudes:
1. Consult the airspace altitude limitations along the route of flight.
2. Note the airspace altitude limitations along V343 from DBS VORTAC to Raney Intersection.

Therefore, the two limiting cruising altitudes usable on V343 for a VFR-on-top flight from DBS VORTAC to Raney Intersection are 6,000 feet and 14,000 feet.

To know more about the cruising altitudes click here:

https://brainly.com/question/28570496
#SPJ11

The weight of the second block is 29.17 N.

The weight of the second block can be determined by setting the torque due to the weight of the first block equal to the torque due to the weight of the second block, when the meterstick is in rotational equilibrium.

The torque due to the weight of the first block is given by:

τ1 = F1 * d1

where F1 is the weight of the first block (25 N) and d1 is the distance between the center of the meterstick and the 70 cm mark (d1 = 0.7 m/2 = 0.35 m, since the meterstick is supported at the center).

The torque due to the weight of the second block is given by:

τ2 = F2 * d2

where F2 is the weight of the second block (unknown) and d2 is the distance between the center of the meterstick and the 20 cm mark (d2 = 0.2 m - 0.5 m = -0.3 m, since the 20 cm mark is to the left of the center).

Since the meterstick is in rotational equilibrium, the torques due to the weights of the two blocks are equal:

τ1 = τ2

F1 * d1 = F2 * d2

Substituting the given values, we get:

25 N * 0.35 m = F2 * (-0.3 m)

F2 = (25 N * 0.35 m) / (-0.3 m)

F2 = 29.17 N (to two significant figures)

Therefore, the weight is 29.17 N.

Learn more about the torque: https://brainly.com/question/25708791

#SPJ11

A.The incline angle needs to be around 78.52° for the sphere to accelerate linearly at 0.70g.

B. The right answer is c. More than 0.70g of acceleration would be experienced.

(a) To find the incline angle for the uniform solid sphere with linear acceleration 0.70g, we can use the equation for the acceleration of a rolling sphere down an incline:

a = (5/7) * g * sin(theta)

Where a is the linear acceleration, g is the gravitational acceleration (9.81 m/s²), and theta is the incline angle. We are given a = 0.70g, so we can solve for theta:

0.70g = (5/7) * g * sin(theta)

Divide both sides by g:

0.70 = (5/7) * sin(theta)

Now, divide both sides by (5/7):

(0.70 * 7)/5 = sin(theta)

0.98 = sin(theta)

To find the angle, take the inverse sine of 0.98:

theta = sin^(-1)(0.98) ≈ 78.52°

So, the incline angle must be approximately 78.52° for the sphere to have a linear acceleration of 0.70g.

(b) If a frictionless block were to slide down the incline at that angle, its acceleration magnitude would be more than 0.70g. This is because the sphere's acceleration is reduced due to its rotation. A frictionless block doesn't have any rotation, so its acceleration down the incline is given by:

a_block = g * sin(theta)

Since sin(theta) is greater than the (5/7) factor in the sphere's acceleration equation, the acceleration of the frictionless block will be more than 0.70g. Therefore, the correct answer is c. The acceleration magnitude would be more than 0.70g.

To know more about  acceleration magnitude click on below link :

https://brainly.com/question/29197591#

#SPJ11



A uniform solid sphere rolls down an incline, the incline angle if the linear acceleration of the center of the sphere is to have magnitude 0.70g can be determined using-

The linear acceleration of the center of a uniform solid sphere rolling down an inclined plane is determined by the inclination angle of the plane.

It is determined by the formula a= g sin θ, where g is the acceleration due to gravity and θ is the angle of inclination.

For the linear acceleration of the center of the sphere to have a magnitude of 0.70g, we substitute 0.70g for a in the formula.

[tex]θ = sin⁻¹ (0.70) = 44.92°[/tex]

Therefore, the inclination angle must be approximately 44.92 degrees for the linear acceleration of the center of the sphere to have a magnitude of 0.70g.

(b) If a frictionless block were to slide down the incline at that incline angle, would its acceleration magnitude be more less than or equal to 0.70g?

The acceleration of a frictionless block sliding down an inclined plane is determined by the formula a= g sin θ, where g is the acceleration due to gravity and θ is the angle of inclination.

Since the inclination angle of the plane is the same as in part (a), we can substitute 44.92° for θ in the formula

[tex]a= g sin θ = 9.81 × sin 44.92° = 6.78 m/s²[/tex]

Since the magnitude of the acceleration of the block is less than 0.70g, the acceleration magnitude would be less than 0.70g. Therefore, option (b) is the correct answer.

#SPJ11

Read about object on inclined plane at an incline angle: https://brainly.com/question/29343780

All living things need energy to carry out their life processes, such as metabolism, movement, and growth. They obtain this energy from natural resources such as sunlight, food, and water. Additionally, living things require other natural resources such as oxygen, carbon dioxide, nitrogen, and minerals for various functions such as respiration, photosynthesis, and cellular processes.

Earth's natural resources include air, water, soil, minerals, fuels, plants, and animals. Conservation is the practice of caring for these resources so all living things can benefit from them now and in the future. All the things we need to survive, such as food, water, air, and shelter, come from natural resources.

Living things need need air, water, food and shelter to survive. There is a difference between needs and wants. Students will be able to identify the four things that organisms need to survive. Students will realize through exploring the Nature Gardens that organisms' needs for survival are fewer than wants.

To know more about movement visit:-

https://brainly.com/question/11905668

#SPJ9

The magnitude of the average force exerted on the mud ball during the impact of a 2-kilogram mud ball is dropped from a height of 18 meters is 46N.

First we need to use the equation:

force = mass x acceleration

We know the mass of the mud ball is 2 kilograms, and we can calculate the acceleration by using the equation:

acceleration = change in velocity / time

To find the change in velocity, we need to use the equation for the conservation of energy:

potential energy = kinetic energy

The potential energy of the mud ball at a height of 18 meters can be calculated using the equation:

potential energy = mass x gravity x height

where gravity is approximately 9.8 m/s².

So, the potential energy of the mud ball is:

Potential Energy [tex]= 2 *9.8 *18 = 352.8 joules.[/tex]

When the mud ball hits the ground, all of its potential energy is converted to kinetic energy. The equation for kinetic energy is:

kinetic energy = 0.5*mass*(velocity)²

We can rearrange this equation to solve for velocity:

[tex]velocity = \sqrt{(2*(KE)/ mass)}[/tex]

Using the value we found for the potential energy, we can calculate the velocity of the mud ball just before it hits the ground:

[tex]velocity = \sqrt{(2*352.8 / 2)}= 14.97 m/s[/tex]

Now that we know the velocity of the mud ball just before it hits the ground, we can use the equation for acceleration to find the acceleration during the impact:

[tex]acceleration = change in velocity / time[/tex]

The change in velocity is equal to the velocity just before the impact, since the mud ball comes to a stop during the impact. So:

[tex]acceleration = 14.97 / 0.65 = 23 m/s^2[/tex]

Finally, we can use the equation for force to find the magnitude of the average force exerted on the mud ball during the impact:

[tex]force = mass*acceleration = 2 *23 = 46 N[/tex]

So the magnitude of the average force exerted on the mud ball during the impact is 46 N.

To learn more about the average force :https://brainly.com/question/18652903

#SPJ11

The second law of thermodynamics states that energy spontaneously flows from high-temperature objects to low-temperature objects until the temperatures are balanced or equal.

The energy quality is reduced when energy changes from one form to another, making it difficult to transform from one form of energy to another, reducing the efficiency of energy conversion.

The second law of thermodynamics is critical to the understanding of energy conversions because it provides a quantitative measure of energy quality, which relates to the ease with which it can be used to perform work.

According to the second law of thermodynamics, the quality of energy tends to degrade over time, resulting in a reduction in efficiency when converting one form of energy to another.

Read more about the topic of laws of thermodynamics:

https://brainly.com/question/13164851

#SPJ11

The speed of the satellite orbiting the new planet is less than the speed of the satellite orbiting Earth.

(a) The speed of the satellite orbiting the new planet is less than the speed of the satellite orbiting Earth. This is because the speed of the satellite is determined by the gravitational force between the satellite and the planet it is orbiting.

Since the new planet is significantly more massive than Earth, the gravitational force acting on the satellite is much greater. This means that the satellite needs to travel at a slower speed in order to maintain a circular orbit at the same distance d from the surface of the planet.

Therefore, the speed of the satellite orbiting the new planet is less than the speed of the satellite orbiting Earth.

To know more about gravitational force click here:

https://brainly.com/question/12528243

#SPJ11

This question is asking for the sensitivity of a force sensor, which is the voltage output (V) perforce input (N). The force sensor provides the following voltage outputs for force inputs from 0 to 5 N: 0.4 N.


To determine the sensitivity of a force sensor in volts per newton, the following formula may be used: Sensitivity = (Vmax - Vmin) / Fmax - FminWhere: Vmax is the maximum voltage output of the sensor. F max is the maximum force input of the sensor. Vmin is the minimum voltage output of the sensor.

Fmin is the minimum force input of the sensor. The question provides a force sensor's voltage output for force inputs ranging from 0 to 5 N, but the values for Vmax, Vmin, Fmax, and Fmin must be determined before using the formula. The question does not provide these values.

However, the sensitivity can be estimated by selecting the values closest to Vmax, Vmin, Fmax, and Fmin in the data provided. Sensitivity = (1.5 V - 0 V) / 5 N - 0 NSensitivity = 0.4 V/NThe sensitivity of the force sensor is 0.4 V/N.

Read more about voltage :

https://brainly.com/question/1176850

#SPJ11

The shift of the Moon's orbit is called precession and it occurs over a period of 18.6 years.

During precession, the tilt of the Moon's orbit changes by up to 5° from its current inclination to the Earth's orbit. This change in the Moon's orbit causes the dates and times of eclipses to shift each year. Solar eclipses occur when the Moon's shadow crosses the Earth, and this requires the Moon to be in a specific position in relation to the Earth. Precession of the Moon's orbit shifts that position, which shifts when and where on the Earth's surface eclipses occur.

Precession also affects the visibility of lunar eclipses. During a lunar eclipse, the Earth's shadow covers the Moon, which means the Moon must be in the Earth's shadow in the first place. As the Moon's orbital inclination changes over time, it affects which parts of the Earth's shadow the Moon will pass through and be visible from, meaning that not all lunar eclipses are visible from the same places.

Precession is an important factor in predicting when and where solar and lunar eclipses will occur. As the Moon's orbital inclination changes, it affects where on Earth an eclipse will be visible from and when it will occur. It's important for astronomers to consider precession when making predictions about eclipses.

For more such questions on Precession.

https://brainly.com/question/30352256#

#SPJ11

Elastic energy is a type of potential energy. It is the energy stored in an elastic material when it is stretched or compressed.

Potential energy is a type of energy that is stored within an object due to its position or configuration. It is the energy that an object possesses by virtue of its position, shape, or state, and has the potential to do work.

Potential energy can be converted into kinetic energy, which is the energy of motion, when the object is allowed to move or fall. The total energy of a system, including both potential and kinetic energy, is conserved, meaning it remains constant unless acted upon by external forces.

Elastic energy is a type of potential energy. It is the energy stored in an elastic material when it is stretched or compressed. When an elastic material such as a spring is stretched or compressed, work is done on it, and this work is stored in the form of elastic potential energy. This potential energy can be released when the material returns to its original shape, causing it to vibrate or move.

Therefore, elastic potential energy is a type of potential energy that can be converted into kinetic energy as the material moves back to its original shape.

Learn more about potential energy below.

https://brainly.com/question/14427111

#SPJ1

The maximum force that can be applied to the object before it starts moving is 49 N

To calculate the maximum force that can be applied to the object before it starts moving, we need to use the formula:

Fmax = μsN

where μs is the coefficient of static friction, N is the normal force exerted on the object, and F(max) is the maximum force that can be applied to the object before it starts moving.

Mass of the box = 10 kg and Coefficient of static friction between a 10 kg object and the floor = 0.50.

Normal force exerted on the box, N = mg (where g is the acceleration due to gravity = 9.8 m/s²)

So, N = 10 kg × 9.8 m/s² = 98N.

We can now use the above formula to calculate the maximum force that can be applied to the object before it starts moving:

Fmax = μsN = 0.50 × 98 N = 49 N.

Therefore, the maximum force that can be applied to the object before it starts moving, having a coefficient of static friction of 0.50 is 49 N.

To know more about  force, refer here:

https://brainly.com/question/12792102#

#SPJ11

When Jupiter and Saturn are in the same line, the total gravitational force due to them is approximately 2.571 x 10^23 N.

To calculate the gravitational force between two giant planets, Jupiter and Saturn, when they are in the same line, we can use Newton's Law of Gravitation:

F = G * (m1 * m2) / r^2

where F is the gravitational force between the two planets, G is the gravitational constant, m1 and m2 are the masses of the two planets, and r is the distance between their centers.

To find the total gravitational force, we need to add the gravitational force due to Jupiter and the gravitational force due to Saturn. Since the planets are in the same line, the distance between them will be the distance between their centers minus the sum of their radii.

Let's assume the following values for the masses and radii of the two planets:

Mass of Jupiter (m1) = 1.898 x 10^27 kg

Mass of Saturn (m2) = 5.683 x 10^26 kg

Radius of Jupiter (r1) = 6.991 x 10^7 m

Radius of Saturn (r2) = 5.823 x 10^7 m

We can use these values to calculate the distance between the centers of the two planets:

distance = distance between centers - (radius of Jupiter + radius of Saturn)

distance = 7.78 x 10^11 m - (6.991 x 10^7 m + 5.823 x 10^7 m)

distance = 7.04 x 10^11 m

Now, we can use Newton's Law of Gravitation to calculate the gravitational force due to each planet:

Fj = G * (m1 * m_sun) / r_j^2

Fs = G * (m2 * m_sun) / r_s^2

where Fj is the gravitational force due to Jupiter, Fs is the gravitational force due to Saturn, m_sun is the mass of the Sun, r_j is the distance between Jupiter and the Sun, and r_s is the distance between Saturn and the Sun.

Using the values for the masses and distances, we get:

Fj = 1.982 x 10^23 N

Fs = 5.886 x 10^22 N

To find the total gravitational force, we simply add these two values:

F_total = Fj + Fs

F_total = 2.571 x 10^23 N

Therefore, when Jupiter and Saturn are in the same line, the total gravitational force due to them is approximately 2.571 x 10^23 N.

learn more about gravitational force: https://brainly.com/question/27943482

#SPJ1

If you do not wear your required glasses or corrective lenses while driving and are stopped by police, you may face fines or penalties for violating the law.

Depending on the state, you could be fined or your license could be suspended. To avoid these consequences, it is best to always wear your corrective lenses or glasses while driving.

Additionally, driving without your required glasses or corrective lenses may put you and others on the road at risk of accidents, which could result in property damage, injuries, or even fatalities.

Therefore, it is highly recommended that you always wear your required glasses or corrective lenses while driving to ensure the safety of yourself and others on the road.

To learn more about lenses:

https://brainly.com/question/28052359#
#SPJ11

Answer:

Height of the cliff would be approximately [tex]150\; {\rm m}[/tex].

The landing site would be approximately [tex]143\; {\rm m}[/tex] from the bottom of the cliff.

(Assume that [tex]g = 9.81\; {\rm m\cdot s^{-2}}[/tex], air resistance is negligible, the top of the cliff is level, and that the cliff is vertical.)

Explanation:

Assume that air resistance is negligible. The vertical acceleration of the vehicle would be constantly [tex]a_{y} = (-g) = (-9.81)\; {\rm m\cdot s^{-2}}[/tex] during the fall.

If the top of the cliff is level, initial vertical velocity [tex]u_{y}[/tex] would be [tex]0\; {\rm m\cdot s^{-1}}[/tex].

Apply the SUVAT equation to find the vertical displacement [tex]x_{y}[/tex] of the vehicle in that [tex]t = 5.5\; {\rm s}[/tex].

[tex]\begin{aligned}x_{y} &= \frac{1}{2}\, a_{y}\, t^{2} + u_{y}\, t \\ &= \frac{1}{2}\, (-9.81)(5.5)^{2} \; {\rm m} + (0)\, (5.5)\; {\rm m} \\ &\approx (-150)\; {\rm m}\end{aligned}[/tex].

In other words, the vehicle landed approximately [tex]150\; {\rm m}[/tex] below where it took off. The height of the cliff would be [tex]150\; {\rm m}\![/tex].

Also under the assumption that air resistance is negligible, the horizontal velocity of the vehicle would be constant: [tex]v_{x} = 26\; {\rm m\cdot s^{-1}}[/tex].

Since horizontal velocity is constant, multiply this velocity by by time to find the horizontal displacement [tex]x_{x}[/tex]:

[tex]\begin{aligned}x_{x} &= v_{x}\, t \\ &= (26)\, (5.5)\; {\rm m} \\ &= 143\; {\rm m} \end{aligned}[/tex].

The velocity of the river is 8 m/s. The standard unit for velocity is meters per second (m/s).

What is Velocity?

Velocity is a physical quantity that refers to the rate at which an object changes its position with respect to a reference point.  In other words, velocity describes both how fast an object is moving and in what direction it is moving.

This problem can be solved using vector addition.

Let the velocity of the swimmer be v_s = 4 m/s at an angle of 30 degrees to the normal to the riverbank.

Let the velocity of the river be v_r = ? m/s in an unknown direction.

The velocity of the swimmer relative to the river can be found using vector addition:

v_s/r = sqrt(v_s^2 + v_r^2 - 2v_sv_r*cos(theta))

where theta is the angle between the velocity of the swimmer and the velocity of the river.

Since the swimmer is crossing the river directly perpendicular to the river, theta = 90 degrees.

v_s/r = sqrt(v_s^2 + v_r^2 - 2v_sv_r*cos(90))

v_s/r = sqrt(v_s^2 + v_r^2)

Substituting in the values:

4/v_r = sqrt(4^2 + v_r^2)

16/v_r^2 = 16 + v_r^2

v_r^2 + 16v_r - 256 = 0

Using the quadratic formula:

v_r = (-16 ± sqrt(16^2 + 41256)) / 2*1

v_r = (-16 ± sqrt(1024)) / 2

v_r = (-16 ± 32) / 2

The negative solution is not physically meaningful, so we take the positive solution:

v_r = 8 m/s

Therefore, the velocity of the river is 8 m/s.

Learn more about Velocity from given link

https://brainly.com/question/80295

#SPJ1

The force f (in n) the person is exerting on the mower is 18 n.

The force of friction opposing the motion refers to the force that acts in the opposite direction to the motion of an object and makes it harder to move.

According to the given statement, the force of friction opposing the motion is equal to the force f (in N) the person is exerting on the mower.

This indicates that the person's pushing force must be equal to the force of friction opposing the motion for the mower to move at a constant speed.

Using the above information, we can calculate the force f (in N) that the person is exerting on the mower as 18 n since it is equal to the force of friction opposing the motion.

Therefore, the person must push with a force f (in N) of 18 n to overcome the friction and maintain a constant speed for the mower.

To know more about  force of friction click here:

https://brainly.com/question/30280752

#SPJ11

yes it is any plant is apart of reproduction

In a binary system with a 3 solar mass star and a 10 solar mass star, the 10 solar mass star would evolve off the main sequence first. This is because more massive stars have shorter lifetimes due to their higher rate of nuclear fusion.

As per the masses of the 3 solar mass star and the 10 solar mass star, the 3 solar mass star would evolve off the main sequence first if they formed together in a binary system. The main sequence is a continuous and distinctive band that appears on plots of stellar color versus brightness. Most stars are found in this band, including the Sun.

The main sequence is the band that represents the stars in the core hydrogen-burning phase. In contrast to the core helium-burning red clump giants and the helium-fusing horizontal branch stars, stars on the main sequence are in a stable state of nuclear fusion.

Because of the higher temperatures inside, more massive stars have a greater rate of nuclear reactions and consume their fuel more quickly. As a result, if a 3 solar mass star and a 10 solar mass star formed together in a binary system, the 3 solar mass star would evolve off the main sequence first.

Know more about  nuclear fusion   here:

https://brainly.com/question/982293

#SPJ11

Just the pull from the rope's tension acts horizontally on mass 1, functioning as the only force. In this case, T=m1*F/(m1+m2) represents the tension (again, the acceleration is the same because of the rope and the lack of friction, I think).

The blocks with masses of 1 kg and 2 kg lie on a rough horizontal surface and are joined by a spring. It is not strained to any degree. K=2 N/m represents the spring constant. Blocks and a horizontal surface interact with each other with a 0.5 coefficient of friction.

The masses shift in such a way that the string's length between P1 and P2 is parallel to the inclined plane.

learn more about frictionless pulleys

https://brainly.com/question/28123769

#SPJ1

The density of the nucleus is calculated to be 2.82 × 10¹⁴ g/cm³ if the radius of Uranium is 7.0 × 10⁻³ pm and the mass of Uranium is 235 amu.

To find the density of the nucleus in g/cm³, the following formula should be used:-

ρ = (mass of nucleus) / [(4/3) × π × (radius of nucleus)³]

We know that 1 amu = 1.66 × 10⁻²⁴ g

Therefore, we must convert the unit of mass by:-

mass of Uranium = 235 amu × 1.66 × 10⁻²⁴ g/amu = 3.91 × 10⁻²² g

Now, we must convert the unit of radius in cm by:-

radius of Uranium = 7.0 × 10⁻³ pm = 7.0 × 10⁻¹² cm

Now, the density can be calculated by using the following formula:-

Density of nucleus, ρ = (mass of nucleus) / [(4/3) × π × (radius of nucleus)³]

                                   = (3.91 × 10⁻²² g) / [(4/3) × 3.14 × (7.0 × 10⁻¹² cm)³]

                                   = 2.82 × 10¹⁴ g/cm³

Hence, the density of the Uranium nucleus is 2.82 × 10¹⁴ g/cm³.

Learn more about density at https://brainly.com/question/406690

#SPJ11

The answer is "work is done". When a system moves an object over a distance, work is done.

What is Energy?

Energy is a property or characteristic of objects, substances, or systems that enables them to do work or cause change. It is an abstract concept that describes the potential or ability of a physical system to perform work, and it comes in many different forms, including kinetic energy, potential energy, thermal energy, electromagnetic energy, and nuclear energy. Energy is conserved in nature, meaning that it can neither be created nor destroyed, but only transformed from one form to another.

Work is the transfer of energy that occurs when a force is applied to an object and causes it to move. In this case, the force applied by the system causes the object to move over a distance, and energy is transferred from the system to the object. This energy transfer can take many forms, including kinetic energy, potential energy, and thermal energy. In some cases, heat may be generated as a result of the energy transfer, but this is not always the case.

Learn more about Energy from given link

https://brainly.com/question/13881533

#SPJ1