what was the main cause of the near extinction of the black-footed ferret?
A. Climate change
B. Dwindling prairie dog populations
C. Natural predators
D. For hunters hunted them to extinction

The velocity of the object when it first reaches a height of 8.10 meters is 18.05 m/s.

To find the speed of the stone when it is 8.26 m higher, we can use the equation for vertical motion under constant acceleration. The equation is:

v^2 = u^2 + 2as

Where:

v = final velocity (m/s)

u = initial velocity (m/s)

a = acceleration due to gravity (9.8 m/s^2, downward)

s = distance traveled (m)

In this case, the initial velocity is 18.1 m/s, the distance traveled is 8.26 m upward, and the acceleration due to gravity is 9.8 m/s^2 downward. We can substitute these values into the equation and solve for the final velocity.

v^2 = 18.1^2 + 2 * 9.8 * 8.26

v^2 = 327.61

v = sqrt(327.61)

v = 18.05 m/s

Air resistance is the term for the frictional force that slows an object's velocity as it moves through the air. Although air resistance considerably affects trajectory motion, it is not taken into account in beginning physics due to the complexity of the calculations.

to know more about speed here:

brainly.com/question/28224010

#SPJ4

According to this, the laser always has higher energy than what is required to break the bond. A portion of the energy is utilized to break the bond, the rest is transformed into heat.

Kilowatt-hours are the unit used by your electric meter to measure power use. One kilowatt hour is equal to one thousand watt-hours. For instance, the energy usage is computed as 100 watts x 10 = 1,000 watts if a 100-watt light bulb is on for 10 hours.

Watts are units used to measure the power of electricity. One ampere under the pressure of one volt is equal to one watt of electrical power. The power of one watt is negligibly little.

To know more about energy meters visit:-

brainly.com/question/438355

#SPJ4

Answer:

A. An illustration of a person listening to the siren of a passing police car. There are circles spreading out from the siren with the wavelength close together in the front and farther apart in the back.

The diagram best shows the perceived sound wave heard by a woman after a police car has passed her is

An illustration of a person listening to the siren of a passing police car. There are circles spreading out from the siren with the wavelength close together in the front and farther apart in the back.

The correct option is first.

The wavelength is the distance between the adjacent crest or trough of the sinusoidal wave. The wavelength is the reciprocal of the frequency of the wave.

The diagram representing circles spreading out from the siren with the wavelength close together in the front and farther apart in the back.

Thus, the correct option is first.

Learn more about wavelength.

https://brainly.com/question/13533093

#SPJ2

Given :

Some objects with different mass.

To Find :

Which of these object will exert the greatest gravitational force on a box, if the distance between them remains the same.

Solution :

We know, gravitation force between two object is given by :

[tex]F = \dfrac{Gm M}{d^2}[/tex]

Here m, G and d are constant.

From the above equation we can see that if every other thing remains constant the gravitations force remains constant if mass of other plant increase.

Therefore, object of mass 8 kg will exert the greatest gravitational force on a box.

Answer: 8 kg mass

Explanation:

Took the test

Answer:

F = G M m / R^2               or g = F/ m = G M / R^2

(A) A small high mass planet obviously fits the first description.

The piston's position, velocity, and acceleration at t = 1.15 s are :

Position: 3.45 m

Velocity: 3 m/s

Acceleration: 0 m/s^2

To calculate the piston's position, velocity, and acceleration at t = 1.15 s, we need to know the angular position, velocity, and acceleration of the wheel.

The angular position of the wheel at t = 1.15 s is given by

θ = ωt + [tex]A_{0}[/tex]

where ω is the angular frequency, t is the time, and [tex]A_{0}[/tex] is the initial angular position.

Since the angular frequency is given as 12 rad/s and the initial angular position is 0, the angular position of the wheel at t = 1.15 s is

θ = 12 x 1.15 = 13.8 radians

The piston's position is given by

r = Rθ

where R is the radius of the wheel.

Substituting the value of R and θ,

r = 0.25 x 13.8 = 3.45 m

The velocity of the piston is given by

v = r' = Rθ' = Rω

Substituting the values

v = Rω = 0.25 x 12 = 3 m/s

Acceleration of the piston is given by

a = v' = Rθ'' = Rω' = R(ω^2)θ

As the angular frequency is constant, the angular acceleration is 0 so the linear acceleration is also 0.

Note: Linear acceleration is not equal to the derivative of linear velocity, it is equal to the derivative of velocity with respect to time, which is zero in this case.

Read more about linear and angular kinematics :

https://brainly.com/question/12977552

#SPJ4

Insignificant are air resistance and rope mass. Point C on a support is where a rope of length L is fastened.

To learn more about mass refer to:

https://brainly.com/question/86444

#SPJ4

If Jada has 25 dimes, she has 10 quarters .

Dime is a coin from the United States or Canada which has value of ten cents.

And. quarter is a coin from the United States or Canada which has value of twenty five cents.

Jada has 25 dimes .

Now, we know that 1 dime is equals to 10 cents.

Hence, Jada has = 25 × 10 cents = 250 cents.

Again we know that 1 quarter is worth 25 cents.

So, Jada has = (250 ÷ 25) quarters

= 10 quarters.

Hence, she has 10 quarters.

Learn more about dimes here:

https://brainly.com/question/14534255

#SPJ1

The work you do when pushing a shopping cart twice as far while applying double the force is twice as much as force.

A push or pull that an object experiences as a result of interacting with another item is known as a force. Every time two items interact, a force is exerted on each of the objects. The force is no longer felt by the two objects when the interaction ends.

Contact forces are the kinds of forces that develop when two objects interact and appear to be in physical contact with one another. Frictional forces, tensional forces, normal forces, air resistance forces, and applied forces are a few examples of contact forces.

Forces that come from action at a distance.

Therefore, The work you do when pushing a shopping cart twice as far while applying double the force is twice as much as force.

To learn more about Forces, refer to the link:

https://brainly.com/question/13191643

#SPJ1

Answer:

On Edg 2021, the answer was "B = The moon's orbital period and distance from Earth"

Explanation:

I hope this is correct for you, if it isn't I am very sorry. Good luck! :)

Newton's principles of motion and the universal law of gravitation can be used to derive Kepler's third law. Make the centripetal force equal to the force of gravity. The following expression, which may also be written as P2=42a3GM, can be obtained by inserting an expression for the planet's velocity: GMr=4r2P2. Thus, option B is correct.

Newton demonstrated that the force that causes something to fall toward the ground, like an apple, is the same force that causes the moon to orbit the Earth. The Sun, as well as any other star and its satellites, are affected by this universal force.

Newtonian physics and Kepler's laws serve as the foundation for planetary motion and orbital laws. Because these fundamental rules govern everything in the cosmos, they also govern how planets and artificial satellites move.

Therefore, If two things experience the same acceleration when the same force is applied to them, then they have the same inertial mass. Newton's second law makes use of the same mass.

Learn more about Kepler's laws here:

https://brainly.com/question/1608361

#SPJ2

The best angle for maximum height and air time when launching an object is 90 degrees. At 90 degrees, the vertical velocity component is at its maximum, allowing the object to reach the highest point. Additionally, the horizontal velocity component is at its minimum, which means that the object will spend more time in the air.

This is because at 90 degrees, the object is moving straight upward and as gravity acts vertically downwards, the object will reach highest point and stay there for longer time as compare to other angles.

However, it's important to note that 90 degrees is ideal for maximum height, but not for maximum distance traveled. For maximum distance, the optimal angle would be 45 degrees, where the horizontal velocity and vertical velocity are equal, as the object will both travel the farthest and reach the highest point.

To know more about velocity click below:

https://brainly.com/question/18084516#

#SPJ4

Answer:

B. Increase in proportion to the wavelength of a wave.

Explanation:

An electromagnetic spectrum refers to a range of frequency and wavelength that an electromagnetic wave is distributed or extends. The electromagnetic spectrum comprises of gamma rays, visible light, ultraviolet radiation, x-rays, radio waves, and infrared radiation.

Electromagnetic waves is a propagating medium used in all communications device to transmit data (messages) from the device of the sender to the device of the receiver.

Generally, the most commonly used electromagnetic wave technology in telecommunications is radio waves.

Radio waves can be defined as an electromagnetic wave that has its frequency ranging from 30 GHz to 300 GHz and its wavelength between 1mm and 3000m. Therefore, radio waves are a series of repetitive valleys and peaks that are typically characterized of having the longest wavelength in the electromagnetic spectrum.

Wavelength is simply the distance from one peak of an electromagnetic wave to the next peak. This distance is also equal to the distance from one trough of a wave to another.

Mathematically, wavelength is calculated using this formula;

[tex] Wavelength = \frac {speed}{frequency} [/tex]

Hence, the waves in the electromagnetic spectrum have a speed that increase in proportion to the wavelength of a wave.

Answer:

2NH3 --> N2 + 3H2 decomposition

The force that was applied to the lever to raise the load of 220 Newtons   toa distance of 4 m is 100 N.

The correct option is C.

A lever gives you the ability to move an object with a certain advantage, allowing you to do so with either less effort or more speed or displacement.

The use of forces and the exploitation of the torques they produce is how levers function. By changing the balance, we can carry large objects with little effort.

The law of the lever is given below as follows:

Fa / Fb = b / a

where;

The effort applied, Fa, is calculated below:

Fb = 220 N

a = 10 m

b = 2 m

Fa = Fb * b / a

Fa = 220 * 2 / 10

Fa = 44 N

Work done = Force * distance

distance = 4 m

400 J = Force * 4

Force = 400 / 4

Force = 100 N

Learn more about force and levers at: https://brainly.com/question/416386

#SPJ1

1. pitch

2. decibel

3. sorry, i dont know

4. c

5. acoustics

Answer:

[tex]g_h = -39.4\ m/s^2[/tex]

Explanation:

The formula for the value of the acceleration due to gravity at a height "h" from the surface of Earth is given as follows:

[tex]g_h = g(1-\frac{2h}{R} )[/tex]

where,

[tex]g_h[/tex] = acceleration due to gravity at height h from the surface of Earth = ?

g = acceleration due to gravity on the surface of the Earth = 9.81 m/s²

h = height from the surface of the Earth = 1.6 x 10⁷ m

R = Radius of the Earth = 6.378 x 10⁶ m

Therefore,

[tex]g_h = (9.81\ m/s^2)(1-\frac{2(1.6\ x\ 10^7\ m)}{6.378\ x\ 10^6\ m})[/tex]

[tex]g_h = -39.4\ m/s^2[/tex]

In the past eight years, there has been a 3% annual drop in the prevalence of stunting among Indian tribal children under the age of five.

To determine the predictors of stunting and severe stunting among tribal children, as well as to suggest potential policy and program implications, cross-sectional data from 1000 children (287 tribal and 713 non-tribal) aged 0-23 months from Odisha's Rapid Survey of Children (RSOC, 2014) were analyzed. The findings indicate that birth order and maternal illiteracy are significant predictors of childhood stunting, and that maternal age at marriage and at birth was less than 18 years old and less than 20 years old, respectively, for severe stunting. Basic factors such as poverty and maternal ages of 20 years at the time of the first birth and 18 years at marriage were found to predict severe stunting in tribal children.

Learn more about cross-sectional here-

https://brainly.com/question/14077757

#SPJ4

The second charge is 0.0002c in size. For a negative charge of -0. 0005 C, a second charge that is 10 metres away experiences an attracting force of 9.0 N.

In science, the issue of magnitude is undoubtedly of utmost significance. Magnitude typically refers to a size or a distance. We can relate magnitude to the movement by comparing the size and motion speed of the thing. A force in physics is an effect that has the power to alter an object's motion. A force can cause an object with mass to change its velocity, or accelerate (for example, moving from a condition of rest).

q2 = 9*(10)^2/(9*10^9*0.0005)

q2 = 0.0002C

Learn more about force here

https://brainly.com/question/13191643

#SPJ4

The amount of heat transferred from the system is -720j, hence option d is the proper response. It passes through a process where its internal energy drops by 500 joules in a thermodynamic system.

The system receives 220 joules of work at the same time. A thermodynamic system's internal energy is the energy that it contains, excluding the energies that are determined by how it interacts with its environment, such as the system's overall kinetic energy of motion and its overall potential energy with regard to external force fields. The definition of heat in thermodynamics is the kind of energy that crosses a thermodynamic system's boundary.

U = Q+W

Q = U - W Q = -500 -220 = -720J

Learn more about kinetic energy here

https://brainly.com/question/26472013

#SPJ4

The gravitational force on the car is 23000 N, the vertical normal (support/reaction) force acting on the car is 0 N, and the horizontal force on the car's tyres from the road is 5460 N.

Mass of the car, m = 2300 kg

Force acting on the car, F = 5000 N

The initial speed of the car, u = 10 m/s

The final speed of the car, v = 14 m/s

Time, t = 20 s

The gravitational force on the car is calculated by the formula given as

F = mg

F = 2300 × 10

F = 23000 N

Now, as there is no vertical movement in the car therefore the vertical force acting on the car is 0 N.

The horizontal force on the car's tyres from the road

= force acting on the car + net force on the car

= 5000 + ma

= 5000 + 2300 × (v-u)/t

= 5000 + 2300 × (14 - 10)/20

= 5000 + 2300 × 4/20

= 5000 + 460

= 5460 N

To know more about gravitational force, here

https://brainly.com/question/24783651

#SPJ4

The sound level of rusting leaves is 20db.

Rustle is a quiet, muted cracking sound made when dry paper or leaves are moved. The movement of weak objects, like the leaves, produces a gentle sound. Ruffle would be the appropriate response because "leaves" is the noun in the sentence.

Over time, so many people have been mesmerized by the sounds of wind in the trees and the rustling of leaves, that they came up with the term "psithurism" to describe them. Psithurism has a silent first "p," like many other words that start with "ps," and is pronounced sith-err-iz-um.

We sometimes refer to a wind that is howling when it is strong and noisy: The trees shook as the wind howled.

To learn more about Sound level from given link

https://brainly.com/question/30160873

#SPJ4

If two blocks are connected by a string of negligible mass that passes over massless pulleys, the system can be analyzed using the principles of Newton's second law and the conservation of energy.

In this scenario, the net force acting on each block is the tension in the string, which is equal in magnitude for both blocks.

Therefore, if the blocks have different masses, they will have different accelerations.

In this scenario, the mechanical energy of the system is the sum of the gravitational potential energy and the kinetic energy of the blocks. If the pulleys are massless and frictionless, then the mechanical energy of the system will be conserved.

In summary, the two blocks will move together with the same acceleration if the pulleys are massless and frictionless.

To know more about pulleys:

https://brainly.com/question/30189162

#SPJ4

The value of T when a particle is at rest is 0. The velocity of the particle at t=0 is zero because the particle is in rest position and did not moving at any of the instance or travelling at an uniform speed through out the whole journey or yet did not start from the source point.

Velocity is the rate of change of velocity. At any point on a trajectory, the magnitude of the velocity is given by the rate of change of velocity in both magnitude and direction. Velocity of the body that we can consider is the increasing value of the velocity of any object at a constant rate and that of we can calculate. Hence by the primary information that we have we can formerly consider that the velocity which is acting on the particle at t=0 is zero because the particle is in rest position and did not moving at any of the instance or travelling at an uniform speed through out the whole journey or yet did not start from the source point and the value of T when a particle is at rest is zero.

Learn more about Velocity:

brainly.com/question/18084516

#SPJ4

The required net force on the car with certain mass and travelling with deceleration is said to be 5000 N.

Given that,

Mass of the car m = 1000 kg

Velocity of the car v = 20 m/s

Time t = 4 sec

Net force on the car = ?

According to Newton's second law of motion, it is said mathematically that, F = m a ---(1)

Acceleration a can be written as the rate of velocity.

a = (v-u)/t = (0 - 20)/4 = - 5 m/s² ---(2)

Substituting (2) in (1) we have,

F = m a = 1000 × - 5 = -5000 kg m/s² or -5000 N

Thus, the required net force on the car is 5000 N.

To know more about force:

https://brainly.com/question/1005491

#SPJ4

90.23 % percentage of the total energy was used to melt the ice.

Energy is the quantitative property that is transferred to a body or to a physical system, recognizable in the performance of work and in the form of heat and light. Energy is a conserved quantity—the law of conservation of energy states that energy can be converted in form, but not created or destroyed.

Total energy used from -[tex]14^{o}[/tex]C  to [tex]11^{o}[/tex]C

= [tex]m_{i}c_{i} T_{i}[/tex] + [tex]m_{i} L_{f}[/tex] +[tex]m_{w} c_{w}[/tex]Δ[tex]T_{2}[/tex]

= (0.013×2200×8) + (0.031×334000) + (0.013×486×11)

= 400.4 + 4342 + 69.498

= 4811.898 J

% energy used to melt = 4342/4811.898 × 100

= 90.23 %

To know more about energy visit :

brainly.com/question/1932868

#SPJ4

Answer:

A chemical reaction expresses a chemical change. For example, one chemical property of hydrogen is that it will react with oxygen to make water. We can write that as follows:

hydrogen reacts with oxygen to make water

We can represent this chemical change more succinctly as

hydrogen + oxygen → water

Answer:

A, B, C, E

Explanation:

The atmosphere does not recycle water and other chemicals

For 0. 250 moles of gas in a piston, the change in internal energy is +131J. While 240 J of heat are supplied, the gas produces 109 J of work. The energy is a thermodynamic system's internal energy.

With the exception of the energies that are determined by how the system interacts with its environment, the system as a whole's kinetic energy of motion and potential energy with respect to external force fields are all that are contained within it. A typical kind of skin development are moles. Clusters of pigment-forming cells are what give them their common appearance as small, dark brown dots (melanocytes).

Internal energy change for U = Q+W is 240+(-109) = +131J.

Learn more about force here

https://brainly.com/question/13191643

#SPJ4

According to the given statement The tension force in each rope is T = 14g/2Sin N, according to the information provided.

Tension is the force that is transmitted through a cable, rope, or wires when it is stretched by loads exerted from opposing sides. The bodies are put through an identical degree of strain at each end of the wire by the tension force, which is exerted all along entire of the wire's length.

Let the tension in each rope be T₁ & T₂

Also, T₁ = T₂ = T

T₁ Sinθ + T₂ Sinθ = mg

2T Sinθ = mg

2T Sinθ = 14g

T = 14g/2Sinθ

To Learn more about Tension force from the given link.

brainly.com/question/2008782

#SPJ4