What volume of a 0.88 M solution can be made using 130g of FeCl2

The limiting reactant is completely used up in the reaction. There will be an excess of other reactants at the end of the reaction. The limiting reactant dictates the amount of product.

Reactant will be the limiting reactant depends on the molar ratios of all the reactants in the experiment (and the coefficients in the balanced reaction equation), so it will absolutely vary depending on the reaction setup and conditions, which is why it cannot always be the same for a given reaction.

Because the molar ratios of the reactants dictate which of them will be the limiting one, it is not true that the one with the lowest mass will always be the limiting reactant.

Therefore, The limiting reactant is completely used up in the reaction. There will be an excess of other reactants at the end of the reaction.

Learn more about limiting reactants here:

brainly.com/question/14225536

#SPJ1

we need to add 0.20 moles of HCl to 1 liter of the buffer solution to achieve a pH of 8.56.

The Henderson-Hasselbalch equation for the buffer system is:

pH = pKa + log([A-]/[HA])

where pKa is the acid dissociation constant for ammonium ion (NH4+), [A-] is the concentration of ammonia (NH3), and [HA] is the concentration of ammonium ion (NH4+).

The pKa for NH4+ is 9.25, so:

pH = 9.25 + log([NH3]/[NH4+])

Substituting the given concentrations, we get:

8.56 = 9.25 + log([NH3]/0.96)

log([NH3]/0.96) = -0.69

[NH3]/0.96 = 0.21

[NH3] = 0.20 M

The balanced chemical equation for the reaction between HCl and NH3 can be used to determine how much HCl is necessary to reach this new concentration:

HCl + NH3 → NH4+ + Cl-

Calculating the amount of HCl required to convert some of the NH3 to NH4+ is all that is necessary because the buffer solution already includes NH4+ and Cl-. The required amount of NH4+ is:

[NH4+] = [NH3] = 0.20 M

The amount of  HCl is needed is

0.20 mol NH3 × 1 mol HCl/1 mol NH3 = 0.20 mol HCl

Therefore, we need to add 0.20 moles of HCl to 1 liter of the buffer solution to achieve a pH of 8.56.

learn more about buffer solutions here

https://brainly.com/question/8676275

#SPJ1

The limiting reagent is chlorine.

The amount of excess reagent that will remain is 0.918 g of Al.

The balanced chemical equation for the reaction is:

2Al + 3Cl2 → 2AlCl3

The molar mass of Al is 26.98 g/mol and the molar mass of Cl2 is 70.90 g/mol. We can use these values to calculate the number of moles of each reactant:

moles of Al = 2.70 g / 26.98 g/mol = 0.100 mol

moles of Cl2 = 4.05 g / 70.90 g/mol = 0.057 mol

According to the balanced equation, 2 moles of Al react with 3 moles of Cl2 to produce 2 moles of AlCl3. Therefore, the amount of AlCl3 produced by each reactant is:

Al: (0.100 mol Al) x (2 mol AlCl3 / 2 mol Al) = 0.100 mol AlCl3

Cl2: (0.057 mol Cl2) x (2 mol AlCl3 / 3 mol Cl2) = 0.038 mol AlCl3

Since Cl2 produces less AlCl3, it is the limiting reagent. The amount of excess Al can be calculated as follows:

moles of excess Al = moles of Al - (moles of Cl2 x (2 mol Al / 3 mol Cl2))

moles of excess Al = 0.100 mol - (0.057 mol x (2/3))

moles of excess Al = 0.034 mol

The mass of excess Al can then be calculated using its molar mass:

mass of excess Al = moles of excess Al x molar mass of Al

mass of excess Al = 0.034 mol x 26.98 g/mol

mass of excess Al = 0.918 g

Therefore, 0.918 g of Al remains unreacted.

More on stoichiometric problems can be found here: https://brainly.com/question/28297916

#SPJ1

Between genes A and B, there is a wider separation or distance than between genes C and D.

The chance of recombination is 50% when the genes are distant from one another or on different chromosomes. In this instance, the two loci's allele inheritance is independent. Recombination frequency less than 50% indicates a connection between the two loci.

A illness that is passed from parent to kid may be linked to one or more genes with certainty thanks to genetic mapping. Moreover, mapping can reveal which chromosome a gene is located on and where exactly it is located on that chromosome.

To learn more about genes visit:

brainly.com/question/8832859

#SPJ1

The energy is stored in a spring that is compressed 0.850m is 213.125 J

Potential energy is the name for this accumulated energy. The accumulated potential energy as a result of a specific elastic object, such as a spring, deforming is known as the potential energy of the spring. It describes the labor involved in stretching the spring and is dependent on both the length of the stretch and the spring constant, k.

Given Data

We know that the expression for energy stored is given as

Energy = Ke

Substituting our given data we have

Energy = 0.5 x 500 N/m x (0.850m)2

     = 0.5 x 500 N/m x (0.850m x 0.850m)

     = 0.5 x 500 N/m x 0.7225m2

     = 213.125 J

Learn more about Energy stored in spring here:

https://brainly.com/question/28596113#:~:text=Expert%2DVerified%20Answer&text=0.1%20J%20of%20elastic%20potential,it%20is%20stretched%20or%20compressed.

#SPJ1

The volume of the balloon is 12 it reaches this then  it is fully cooled by my refrigerator.

What is volume ?

Space is occupied by every three-dimensional object. Its volume serves as a gauge for this area. The area contained by an object's limits in three-dimensional space is referred to as its volume. Another name for it is an object's capacity.

What is temperature ?

The movement of these particles likewise increases with rising temperature. A thermometer or a calorimeter are used to measure temperature.

Therefore, The volume of the balloon is 12 it reaches this then  it is fully cooled by my refrigerator.

Learn more about volume from the given link.

https://brainly.com/question/463363

#SPJ1

Answer:

2.5 moles of aluminum oxide will form when all 5.0 moles of aluminum are used up.

Explanation:

The balanced chemical equation for the reaction between aluminum (Al) and oxygen (O2) to form aluminum oxide (Al2O3) is:

4 Al + 3 O2 → 2 Al2O3

This equation shows that 4 moles of aluminum react with 3 moles of oxygen to form 2 moles of aluminum oxide.

According to the problem, we have 5.0 mol of aluminum, which is more than enough to react with the oxygen available, and the limiting reagent in this reaction will be aluminum. Therefore, we need to use the mole ratio from the balanced equation to find out how many moles of aluminum oxide will form when all 5.0 moles of aluminum are used up.

From the equation, we can see that for every 4 moles of aluminum, 2 moles of aluminum oxide will form. Therefore, the mole ratio of aluminum to aluminum oxide is 4:2, or simplified, 2:1.

Using this mole ratio, we can calculate the number of moles of aluminum oxide that will form when all 5.0 moles of aluminum react:

5.0 mol Al × (2 mol Al2O3/4 mol Al) = 2.5 mol Al2O3

Therefore, 2.5 moles of aluminum oxide will form when all 5.0 moles of aluminum are used up.

UN1449 is a UN number that is used to identify a specific hazardous material or substance during transportation. To determine the subsidiary class of UN1449, we need to consult the relevant Schedule 1 of the UN Model Regulations or the applicable national regulations.

The subsidiary class of a hazardous material is determined by its properties and characteristics, such as its physical state, chemical composition, toxicity, flammability, and reactivity. These properties help to identify the potential risks and hazards associated with the material and inform the appropriate measures for safe handling, storage, and transport.

In general, the subsidiary class of a hazardous material is indicated by a numerical code following the primary class, such as Class 3, Flammable Liquids, Packing Group II (UN1263). However, the exact classification and labeling requirements for hazardous materials depend on various factors, including the mode of transport, quantity, packaging, and destination.

To know more about UN1449, visit:

https://brainly.com/question/28188153

#SPJ1

Molecular formula mass = empirical formula mass x n

We know that the molecular formula mass is approximately 60 g/mol, so that we can set up an equation:

60 g/mol = 30 g/mol x n

Solving for "n," we get:

n = 2

This means that the molecular formula of the compound is twice the empirical formula of C2H4O2. Therefore, the compound is acetic acid.

Acetic acid is one of the simplest carboxylic acids and is an important chemical reagent and industrial chemical. It is widely used in the production of vinyl acetate monomer (VAM), which is used in manufacturing polymers, adhesives, and coatings. It is also used as a solvent and preservative in food and other products.

Ethanoic acid is the main component of vinegar, typically a 5% solution of acetic acid in water. In addition to its industrial and commercial uses, acetic acid also has some medical applications, such as in treating ear infections and as a topical antimicrobial agent.

To learn more about acid, visit here:

https://brainly.com/question/14072179

#SPJ1

Answer:

the mass of 2.20 x 10^22 formula units of NaOH is 1.46 grams to three significant figures.

Explanation:

To calculate the mass of 2.20 x 10^22 formula units of NaOH, we can use the following steps:

Calculate the number of moles of NaOH:

Number of moles = Number of formula units / Avogadro's number

Number of moles = 2.20 x 10^22 / 6.022 x 10^23

Number of moles = 0.0365 mol

Calculate the mass of NaOH:

Mass = Number of moles x Molar mass

Mass = 0.0365 mol x 40.0 g/mol

Mass = 1.46 g

Therefore, the mass of 2.20 x 10^22 formula units of NaOH is 1.46 grams to three significant figures.

Answer:

First, we need to calculate the amount of heat required to raise the temperature of ice from -21°C to 0°C:

q1 = m × C_solid × ΔT = 31 g × 2.09 J/g·°C × (0°C - (-21°C)) = 1341.09 J

Next, we need to calculate the amount of heat required to melt the ice at 0°C:

q2 = m × ΔH_fusion = 31 g × 334 J/g = 10354 J

Then, we need to calculate the amount of heat required to raise the temperature of the liquid water from 0°C to 42°C:

q3 = m × C_liquid × ΔT = 31 g × 4.18 J/g·°C × (42°C - 0°C) = 5201.56 J

Finally, we need to calculate the amount of heat required to vaporize the liquid water at 100°C:

q4 = m × ΔH_vaporization = 31 g × 2260 J/g = 70060 J

The total amount of heat required is the sum of all four steps:

q_total = q1 + q2 + q3 + q4 = 86857.65 J

Converting to kJ:

q_total = 86.85765 kJ

Therefore, the amount of heat required to convert 31 g of ice at -21°C to liquid water at 42°C is approximately 86.9 kJ.

Explanation:

The parts of the atom is as follows:

A.) Electrons

ElectronsB.) Neurons

ElectronsB.) NeuronsC.) Protons

An atom is defined as the indivisible part of an element that cannot further be broken down into smaller particles through a chemical process.

The various parts of an atom include the following:

Learn more about elements here:

https://brainly.com/question/25916838

#SPJ1

Answer:

A. electron

B. neutron

C. proton

Explanation:

The mass of H2 produced is 0.657 g.

Generally, The balanced equation is:

2 HCl → H2 + Cl2

The molar mass of HCl is 36.5 g/mol (1+35.5).

First, we need to determine the number of moles of HCl:

23.8 g HCl × (1 mol HCl/36.5 g HCl) = 0.651 mol HCl

From the balanced equation, we can see that 2 moles of HCl produce 1 mole of H2:

2 mol HCl → 1 mol H2

So, we can calculate the number of moles of H2 produced:

0.651 mol HCl × (1 mol H2/2 mol HCl) = 0.326 mol H2

Finally, we can use the molar mass of H2 to convert the number of moles of H2 to grams:

0.326 mol H2 × 2.016 g H2/mol = 0.657 g H2

Read more about chemical reaction

https://brainly.com/question/29039149

#SPJ1

Answer:

Therefore, the answer is none of the above; all options are associated with the triangle.

Explanation:

In an isosceles right triangle, the two legs are congruent, and each angle other than the right angle is 45 degrees. Since the hypotenuse of the triangle is 6 units, each leg has a length of:

leg length = hypotenuse / √2 = 6 / √2

This can be simplified by multiplying the numerator and denominator by √2:

leg length = (6 / √2) * (√2 / √2) = 6√2 / 2 = 3√2

Therefore, the length of each leg is 3√2 units.

Option (c) 6√2 is associated with the triangle as it is the length of the hypotenuse.

Option (a) 45° degrees is associated with the triangle as it is one of the acute angles of the isosceles right triangle.

Option (b) 90° degrees is associated with the triangle as it is the right angle of the isosceles right triangle.

Option (d) 3√2 is associated with the triangle as it is the length of each leg of the isosceles right triangle.

Therefore, the answer is none of the above; all options are associated with the triangle.

The concentrations of PCl5(g) and PCl3(g) at equilibrium are 0.0524 M and 0.0165 M, respectively.

For the given reaction, the equilibrium constant (Kc) is 1.80 at 250 °C.

The concentration of PCl5(g) is 0.2377 mol/3.45 L = 0.0689 M at the beginning of the process.

Let x M be the PCl3(g) concentration at equilibrium. Hence, x M is likewise the concentration of Cl2(g) at equilibrium.

Using the equilibrium constant expression:

Kc = [PCl3][Cl2]/[PCl5]

1.80 = x * x / (0.0689 - x)

Solving for x using the quadratic formula:

x = [(-1) ± sqrt(1 + 4 * 1.80 * 0.0689)] / (2 * 1)

x = 0.0165 M or 0.0524 M

Therefore, at equilibrium:

[PCl5] = 0.0689 - x = 0.0524 M

[PCl3] = x = 0.0165 M

So, the concentrations of PCl5(g) and PCl3(g) at equilibrium are 0.0524 M and 0.0165 M, respectively.

learn more about equilibrium here

https://brainly.com/question/517289

#SPJ1

Any time a liquid loses or receives energy, the temperature of the liquid changes.To calculate the amount pf energy change, the calorimeter monitors the weight of the fluid as well as the temperature change.

The 6000 series calorimeters' control systems serve as the foundation for the 6772 Calorimetric Thermometer, a high precision temperatures measuring device.It is a crucial component of both the 6755 Solution Calorimeter and the 6725 Semi-micro Calorimeter.

The calorimeter is a piece of equipment used in calorimetry, a procedure for calculating heat capacity and measuring the temperature of chemical processes or other physical changes.Among the most popular kinds are differential scanning operating, thermal micro cathode rays, titration calorimeters, and accelerated rate calorimeters.

To know more about energy visit:

https://brainly.com/question/1932868

#SPJ1

The limiting reactant in this reaction is lead nitrate Pb(NO₃)₂. The mass of lead nitrate in this reaction is 331.2 g. The percent yield of PbI₂ is 76.5%.

The percent yield of a reaction is the ratio of its actual yield to the  theoretical yield multiplied by 100.

The limiting reactant of a reaction is the reactant which is not in sufficient quantity and as soon as it is consumed, the reaction stopes.

As per the given balanced equation, 2 moles of KI reacts with one mole of  lead nitrate. Then, 2.8 moles of KI need 1.4 moles of lead nitrate. Hence, Pb(NO₃)₂ is the limiting reactant.

molar mass of Pb(NO₃)₂ = 331.2 g/mol

molar mass of KI = 166 g/mol

mass of 2 moles = 332 g

mass of PbI₂ = 461 g/mol

mass of 0.765 moles = 352.6 g.

molar mass of KNO₃ = 101 g

mass of 1.53 moles = 154 .5 g.

One mole of Pb(NO₃)₂ gives one mole of PbI₂. Hence the theoretical yield is one mole. But the actual yield of the product lead iodide is 0.765 moles.

then percent yield = 0.765/1 × 100 = 76.5 %.

Find more on percent yield :

https://brainly.com/question/12704041

#SPJ1

The percentage composition of magnesium hydroxide in the substance (Mg(OH)2) is 41.67%.

Magnesium hydroxide (Mg(OH)2) is of one magnesium (Mg) atom and two hydroxides (OH) ions.

The atomic mass of Mg = 24.31 g/mol

the atomic mass of O and H = 15.99 g/mol & 1.01 g/mol

The molecular weight of Mg(OH)2 is:

Mg(OH)2 = (24.31 g/mol) + 2(15.99 g/mol + 1.01 g/mol)

= 58.32 g/mol

To calculate percentage composition, we need to calculate the mass of magnesium in one molecule of  (Mg(OH)2)

Mass of Mg = 24.31 g/mol

The percentage composition of magnesium in Mg(OH)2 is:

(24.31 g/mol / 58.32 g/mol) x 100% ≈ 41.67%

Therefore, the percentage composition of magnesium in Mg(OH)2 is approximately 41.67%.

To learn more about, Percentage composition of the molecule

https://brainly.com/question/17021926

https://brainly.com/question/26632540

The maximum temperature of metal is 1,381,250 J/gC.

For more information on heat capacity kindly visit to

https://brainly.com/question/28302909

#SPJ9

Answer:

4.42 x 10^22 molecules

Explanation:

1 mole of CO2 has 6.022 x 10^23 molecules

=> 0.0734 x 6.022 x 10^23 = 4.420148 x 10^22 or 4.42 x 10^22

It should be noted that the right response is (b) Alcoholic KOH, which upon hydrolysis would produce the secondary alcohol propan-2-ol.

The reagent X should be able to add a nucleophile to the carbonyl carbon of CH3CHO, and the product formed should be capable of being hydrolyzed to give propan-2-ol.

Option (c) CH3MgI (Grignard reagent) is a strong nucleophile and can add to the carbonyl carbon of CH3CHO to form a tertiary alcohol. However, the product formed will be propan-2-ol (2-methylpropan-1-ol) instead of propan-2-ol (propanol). Therefore, option (c) can be eliminated.

Option (d) Alcoholic KCN is a nucleophilic reagent that can add to the carbonyl carbon of CH3CHO to form an intermediate that can be hydrolyzed to give a carboxylic acid. Therefore, option (d) can be eliminated.

However, since the reaction conditions are not specified, it is not possible to determine which of the two options is the correct answer. If the reaction is carried out under basic conditions, then option (a) would be the correct answer. If the reaction is carried out under acidic conditions, then option (b) would be the correct answer.

Learn more about reagents on:

https://brainly.com/question/6959208

#SPJ1

Answer:

The rearrangement of atoms is a chemical change.

Explanation:

Many elements can form double bonds, but some of the most common ones include:

Carbon (C)

Oxygen (O)

Nitrogen (N)

Sulfur (S)

Selenium (Se)

Tellurium (Te)

Phosphorus (P)

Silicon (Si)

Germanium (Ge)

Tin (Sn)

These elements can form double bonds with other atoms of the same element, or with different elements. Double bonds occur when two atoms share two pairs of electrons.

The lithium metal batteries are used in many devices like cell phones, tablets and laptops. The special provision 149 tells you what safety mark should be used.

The primary batteries which have metallic lithium as an anode are called lithium metal batteries. Most of the lithium metal batteries are found to be non-rechargeable. There are three types of cells which are used in lithium batteries, they are cylindrical, prismatic and pouch cells.

The special provision 149 of the TDG regulations states that UN3090, LITHIUM METAL BATTERIES and UN3480 LITHIUM ION BATTERIES are forbidden for transport as cargo on a passenger aircraft.

To know more about lithium batteries, visit;

https://brainly.com/question/29553602

#SPJ1

Answer:

I believe the answer is carbon dating

Explanation:

A physical change is when a substance's phase changes. Low molecular attraction material C requires more energy to be moved out, which means its kinetic energy must be reduced.

Neither creation nor destruction of energy is possible. Yet, it is transferable from one type to another, preserving the system's overall energy.

In the liquid state, molecules or atoms have medium molecular affinity and are somewhat closer together than they are in the gaseous state, where they are widely apart and have low intermolecular forces of attraction.

As a material transforms from a gas to a liquid, its molecules condense and become closer to one another, creating a stronger molecular attraction.

Gas B has a medium level of molecular attraction, making it easy to liquify with little energy transfer, whereas gas C has a lower level of molecular attraction but a greater level of kinetic energy, requiring more energy transfer.

To know more about physical changes visit:

https://brainly.com/question/17931044

#SPJ1

Answer:

+2.

Explanation:

Each phosphate ion (PO43-) has a charge of -3. Since there are two phosphate ions in the formula, the total negative charge from the phosphate ions is -6.

In order to balance the negative charge, the sum of the positive charges from the X3+ ions must be +6.

the charge of element X can be calculated as follows:

X3+ × 3 = +6

X3+ = +2

So the charge of element X in X3(PO4)2 is +2.

3.011  × 10²³ molecules are in 0.5 moles of PCl₃.

The mole is an amount unit similar to familiar units like pair, dozen, gross, etc. It provides a specific measure of the number of atoms or molecules in a bulk sample of matter.

A mole is defined as the amount of substance containing the same number of atoms, molecules, ions, etc. as the number of atoms in a sample of pure 12C weighing exactly 12 g.

Given,

Moles of PCl₃ = 0.5 moles

We know that 1 mole = 6.023 × 10²³ molecules

Thus, 0.5 moles will have 6.023 × 10²³ × 0.5 molecules.

= 3.011  × 10²³ molecules

Therefore, 3.011  × 10²³ molecules are in 0.5 moles of PCl₃.

Learn more about Moles, here:

https://brainly.com/question/20486415

#SPJ9

The Chlorine anlon provides a strong attraction to the potassium ion. That is option A.

An anion is defined as the negatively-charged ions which means that they have more electrons than protons due to having gained one or more electrons.

A cation is defined as the positively-charged ions which means that atoms or groups of atoms that have more protons than electrons due to having lost one or more electrons.

The potassium is a cation while the chlorine atom is an anion in the crystal salts.

Learn more about atoms here:

https://brainly.com/question/29522188

#SPJ1

The balanced complete neutralization reaction between each pair of reactants are-

CH₃COOH + NaOH → CH₃COONa + H₂O

CaCO₃ + HCl → CaCl₂ + H₂CO₃

What is balancing of a reaction?

Balancing of a reaction is based on Law of conservation of mass where we have to balance masses of the reactants and products in LHS and RHS of a chemical reaction.

For e.g -

6CO₂ + 6H₂O → C₆H₁₂O₆ + 6O₂

Therefore, the balanced complete neutralization reaction between each pair of reactants are-

CH₃COOH + NaOH → CH₃COONa + H₂O

CaCO₃ + HCl → CaCl₂ + H₂CO₃

Learn more about Balancing of a reaction, here:

https://brainly.com/question/14258973

#SPJ9