what volume in ml of concentrated sulfuric acid (18.0)m h2so4) is needed to prepare 9.0l of a 1.00m solution?

To prepare a buffer with a pH of 5.648, what quantity of solid potassium acetate should be added to 0.500 L of a 0.260 M acetic acid solution?The given is: Initial volume = 0.500 LI nitial concentration of acetic acid = 0.260 M Molarity of acid is given, and the pH is given, which is the pKa value of the acid.

The formula for calculating the ratio of the acid and salt is pH = pKa + log [salt] / [acid].The Henderson-Hasselbalch equation can be used to solve this problem in a single step.The Henderson-Hasselbalch equation is used to calculate the pH of a buffer solution. It is expressed as: pH = pKa + log [A-] / [HA]Where [HA] is the concentration of the weak acid, and [A-] is the concentration of the conjugate base. To calculate the required amount of potassium acetate: Step 1: Calculate the pKa of acetic acid. Acetic acid has a pKa of 4.76. pH = pKa + log [A-] / [HA].The given pH value is 5.648.Therefore, 5.648 = 4.76 + log [salt] / [acid].Find the ratio of the salt and the acid:[salt] / [acid] = antilog (pH - pKa).= antilog (5.648 - 4.76)= antilog (0.888)= 7.29 [salt] / [acid].The ratio of the salt to the acid is 7.29:1. We'll use this ratio to determine the quantity of potassium acetate that should be used to produce the buffer.

Step 2: Calculate the concentration of acetic acid in the buffer solution.The concentration of acetic acid in the buffer is:[acid] = 0.260 M.The volume of buffer solution is 0.500 L.So, the number of moles of acetic acid in the solution is:[acid] × volume = 0.260 × 0.500 = 0.130 moles of acid.Step 3: Determine the number of moles of potassium acetate necessary to produce the buffer.The moles of salt required = moles of acid / 7.29 = 0.130 / 7.29 = 0.0178 moles of salt (KAc).Step 4: Convert the number of moles of potassium acetate to grams. The molecular weight of potassium acetate is 98.14 g/mol.The mass of salt required is:mass = moles × molecular weight.= 0.0178 × 98.14= 1.747 grams of KAc.Therefore, 1.747 grams of potassium acetate should be added to 0.500 L of a 0.260 M acetic acid solution to prepare a buffer with a pH of 5.648.

Learn more about preparation of buffer: https://brainly.com/question/13176293

#SPJ11

The kinetic molecular theory is a set of assumptions that are used to explain the behavior of gases. The correct option is "gas particles themselves have negligible volume."

Kinetic molecular theory is a theory of gases that explains their macroscopic properties based on the behavior and motion of their individual molecules.

The theory includes several postulates, or assumptions, that are considered to be true in order to explain the observed behavior of gases.

One of these postulates is that the gas particles themselves have negligible volume. This means that the actual size of the individual molecules is so small compared to the volume of the container they are in that their size can be ignored when considering the overall behavior of the gas.

Other postulates of kinetic molecular theory include that gas particles are in constant random motion, that they do not interact with each other except during collisions, and that collisions between particles are perfectly elastic and conserve both energy and momentum.

The theory also postulates that the average kinetic energy of the gas particles is directly proportional to the absolute temperature of the gas.

Therefore, gas particles themselves have negligible volume is a postulate of kinetic molecular theory .

To know more about Molecular theory refer here :

https://brainly.com/question/1520986

#SPJ11

The result of the operation in scientific notation is 2x10^-4.

In scientific notation, multiply two integers' coefficients and add their exponents to get their total. Divide the coefficients and deduct the exponents of two numbers to divide them in scientific notation.

One approach is to fully write out each number after it has been converted from scientific notation, then calculate the total of the two values and translate the result back into scientific notation.

In scientific notation, exponents are subtracted from coefficients when dividing integers.

So, for 2.8x10^-6 ÷ 1.4x10^-2,

(2.8 ÷ 1.4) x 10^(-6-(-2))

= 2 x 10^(-6+2)

= 2 x 10^(-4)

To know more about scientific notation visit:

https://brainly.com/question/1767229

#SPJ9

When there is an overpressure condition, operators may be required to take various steps, such as the following:

The following are some of the qualifications that are required for an operator:

Operators may also be required to follow established procedures for dealing with overpressure conditions in order to maintain safety and prevent equipment damage.

Learn more about Operators: https://brainly.com/question/20628271

#SPJ11

The edge length of a body-centered cubic (BCC) unit cell for the given alloy is 1.93 Å.

The edge length of a body-centered cubic (BCC) unit cell can be calculated using the following formula:

Edge length = (4/√3)a

Where a is the length of the edge of the unit cell. Here, Fe is the solvent, and V is the solute. The formula for a solid-solution alloy's density can be expressed as follows:

ρ = [M1ρ1 + M2ρ2]/[M1 + M2]

where M1 and M2 are the molecular weights of the solvent and solute atoms, respectively, and ρ1 and ρ2 are their densities. The molecular weight of the solvent Fe and the solute V are 55.85 and 50.94 g/mol, respectively. At room temperature, the densities of Fe and V are 7.86 g/cm³ and 6.0 g/cm³, respectively. We'll use the following equation to determine the density of the alloy:

ρ = [85(7.86) + 15(6.0)]/[85 + 15]

ρ = (668.1/100)

ρ = 6.68 g/cm³

Substituting these values in the formula for edge length of BCC unit cell, we get,

Edge length = (4/√3) × a6.68 = (4/√3) × a

We will then solve for a as follows:

a = (6.68 × √3)/4a = 1.93Å

Therefore, the edge length for the given alloy is 1.93 Å.

To learn more about "edge length", visit: https://brainly.com/question/16176175

#SPJ11

The titration's equilibrium point has a pH of 9.25.

The pH at the equivalence point in the titration of 0.60 M lactic acid, HC₃H₅O₃, with 0.80 M NaOH can be calculated by considering the titration curve. At the equivalence point, all of the lactic acid has been neutralized by the NaOH, and the solution contains only the lactate ion (C₃H₅O₃⁻) and excess NaOH. The lactate ion is the conjugate base of lactic acid, and it acts as a buffer to resist changes in pH.

The pH of the buffer solution can be calculated using the Henderson-Hasselbalch equation, pH = pKa + log([C₃H₅O₃⁻]/[HC₃H₅O₃]). The pKa of lactic acid is 3.86. At the equivalence point, the concentration of lactate ion will be equal to the concentration of NaOH added.

Therefore, [C₃H₅O₃⁻] = 0.80 M. The initial concentration of HC₃H₅O₃ is 0.60 M, but at the equivalence point, all of the lactic acid has been neutralized, so the concentration of HC₃H₅O₃ will be zero. Substituting these values into the Henderson-Hasselbalch equation, we get pH = 9.25.

Therefore, the pH at the equivalence point in the titration is 9.25.

To learn more about equivalence point refer to:

brainly.com/question/29999744

#SPJ4

F = k * (q1 + q2) / r² is the formula for the electric force between two charges.

The resultant force between the two charges is denoted by the letter "F". "r" is the separation between the two charges. You only need to be aware that the "r" stands for "radius of separation" because it is merely a distance.

Unlike charges attract each other whereas like charges repel one another. As a result, a positive charge pulls a negative charge towards it whereas two negative charges repel one another. The line between the two charges is where the attraction or repulsion occurs.

To know more about formula visit:-

https://brainly.com/question/20748250

#SPJ1

The relationship between the rate of effusion of a gas and its molar mass is that gases with smaller molar masses will effuse faster. The molar mass of the unknown gas is 185.4 g/mol.

The relationship between the rate of effusion of a gas and its molar mass is defined by Graham's Law. The law states that the rate of effusion of a gas is inversely proportional to the square root of its molar mass. This is because gases with lower molar masses have lighter molecules that have less energy and are more likely to break the intermolecular bonds between the gas molecules and escape.

It can be represented as:

R₁/R₂ = √M₂/√M₁

where R₁ and R₂ represent the rates of effusion of gases 1 and 2, and M₁ and M₂ represent their respective molar masses.

Rate of effusion of CH₄ = 3.4 x (rate of effusion of unknown gas)

The molar mass of CH₄ = 16.04 g/mol

By Graham's Law,

R₁/R₂ = √M₂/√M₁

R₁ =3.4 R

R₂ = R  (let the rate of effusion of the unknown gas be 'R')

M₁ = molar mass of CH4 = 16.04; M₂ = molar mass of unknown gas

3.4R/R = √M₂/√16.04

√M₂ = (3.4 x √16.04)

Squaring both sides, we get:

M₂ = (3.4)² x 16.04

∴ M₂ = 185.4 g/mol

Therefore, the molar mass of the unknown gas is 185.4 g/mol.

To know more about the rate of effusion, refer here:

https://brainly.com/question/8804761#

#SPJ11

Answer:

c number is the answer of this question

If H₂O is removed from the given reaction, the reactants will react to produce more H₂O. Therefore, the correct option is option C.

Le Chatelier's Principle states that when a chemical system is under stress and in equilibrium, the equilibrium should change to lessen the stress. In response to an alteration in temperature, intensity, volume, or pressure, it can be used to forecast the course of a chemical reaction.

The equilibrium law or Chatelier's principle are other names for Le Chatelier's principle. The theory foretells how changes will affect a system. Although it is most frequently used in chemistry, it is equally relevant in economics as well as biology (homeostasis). If H₂O is removed from the given reaction, the reactants will react to produce more H₂O.

Therefore, the correct option is option C.

To know more about Le Chatelier′s Principle, here:

https://brainly.com/question/2001993

#SPJ5

Answer:

2 hydrogen atoms

Explanation:

because the hydrogen atoms are two

The value of Kb for a weak base could be determined by titration in the same way that Ka for a weak acid is determined in an experiment.

Thus, the correct answer is "Yes, it could".

Titrаtion is the process of determining the concentrаtion of а solution by reаcting it with аnother solution of known concentrаtion. In аcid-bаse titrаtions, а solution of аn аcid or а bаse is titrаted with а solution of а strong bаse or а strong аcid, respectively. The equivаlence point is the point аt which the аcid аnd bаse аre completely neutrаlized, аnd their respective moles аre equаl.

А weаk bаse is а chemicаl compound thаt doesn't fully dissociаte in wаter, аnd hence, produces fewer hydroxide ions (OH-) thаn а strong bаse. The pH of а weаk bаse is typicаlly higher thаn 7, аnd the concentrаtion of hydroxide ions in а weаk bаse is lower thаn the concentrаtion of the bаse itself. One-hаlf the equivаlence point (pKа) of а weаk аcid is cаlculаted from the point of equivаlence where а weаk аcid аnd а strong bаse reаct to form а conjugаte bаse аnd wаter.

Your question is incomplete, but most probably your full question can be seen in the Attachment.

To learn more about titration, click here: https://brainly.com/question/2728613

#SPJ11

a) To ensure purity and yield of desired product. b) The side product is minimized to improve the purity, yield, and overall efficiency of the reaction

Why are the side products minimized in a reaction?

a) The presence of the side product benzalacetone would be minimized to ensure the purity and yield of the desired product in the reaction. Minimizing side products helps to avoid wasting resources, reduce the need for purification steps, and maintain the efficiency of the process. To minimize benzalacetone formation, you can optimize reaction conditions such as temperature, concentration, and use of a suitable catalyst.

b) Similarly, the presence of the side product 4-hydroxy-4-methyl-2-pentanone would be minimized to improve the purity, yield, and overall efficiency of the reaction. Reducing side products leads to a more cost-effective and environmentally friendly process. To minimize the formation of 4-hydroxy-4-methyl-2-pentanone, you can fine-tune the reaction conditions, including the use of appropriate reactants, temperature control, and selecting an optimal catalyst.

To know more about Reactions:

https://brainly.com/question/30032484?

#SPJ11

The answer is 14.3 grams of H2O can be made.

Looking at the balanced chemical equation:

S + 6 HNO3 → H2SO4 + 6 NO2 + 2 H2O

We can see that 6 moles of HNO3 will produce 2 moles of H2O.

To calculate the number of moles of HmNO3 in 150.2 grams, we need to divide the mass by the molar mass:

150.2 g HNO3 x (1 mol HNO3 / 63.01 g HNO3) = 2.38 mol HNO3

Now we can use the mole ratio to find the number of moles of H2O produced:

2.38 mol HNO3 x (2 mol H2O / 6 mol HNO3) = 0.793 mol H2O

Finally, we can convert the number of moles of H2O to grams by multiplying by the molar mass:

0.793 mol H2O x 18.02 g/mol = 14.3 g H2O

Rounding to the nearest tenth, the answer is 14.3 grams of H2O can be made.

learn more about mass here

https://brainly.com/question/24191825

#SPJ1

Answer:

No , No for both

niether of these reaction will take place as in First one Ag is less reactive then Na so It cannot displace it .. Same for Second reaction Mn Cannot displace Ca

Rhombic sulfur and monoclinic sulfur are the two primary allotropes of sulfur.

Allotropes are various versions of the same element that can exist in various crystal shapes or physical states. An element's several allotropes each have different physical and chemical characteristics. For instance, carbon can exist in a variety of allotropes, each with a unique set of properties and applications, such as diamond, graphite, and fullerene.

The most prevalent type of sulfur is rhombic sulfur, which is yellow in hue. It is made up of S8 rings that have been puckered into a chair-like conformation. Rhombic sulfur is insoluble in water and stable at temperatures lower than 96°C. Insecticides, fertilizers, and sulfuric acid are all made with it.

Compared to rhombic sulfur, monoclinic sulfur is less frequent and denser. Although it has golden crystals as well, they resemble needles. Monoclinic sulfur can dissolve in some solvents, such as carbon disulfide, and is stable above 96°C. Both the vulcanization of rubber and the creation of gunpowder use it.

The 58 molecules that make up both types of sulfur are the same, but their crystal shapes and physical characteristics are different. Other allotropes of sulfur, like amorphous sulfur and plastic sulfur, which have different structures and characteristics from rhombic and monoclinic sulfur, can also occur.

To know more about allotropes, visit:

brainly.com/question/13058829

#SPJ1

The reactions that occur when this mixture is heated are [tex]MgSO_4 + 7H_2O[/tex] (heat) and  [tex]CoCl_2 + 6H_2O[/tex](heat).

It is given that the material used in some cracker tins that include a glass vial of drying material in the lid to keep the crackers crisp is a mixture magnesium sulfate and cobalt chloride indicators.

The indicator changes color from blue to pink when magnesium sulfate absorbs moisture. The reaction is as follows:

[tex]MgSO_4 . H_2O + 6H_2O--- > MgSO_4 . 7H_2O[/tex]

Similarly cobalt chloride absorbs moisture as:

[tex]CoCl_2 . 4H_2O + 2H_2O --- > CoCl_2 . 6H_2O[/tex]

When these substances are heated the following reaction takes place:

This reaction is an endothermic reaction that involves the removal of water molecules from magnesium sulfate, producing anhydrous magnesium sulfate and water vapor.

[tex]MgSO_4 . 7H_2O -- > MgSO_4 + 7H_2O (heat)[/tex]

It involves the removal of water molecules from cobalt chloride, producing anhydrous cobalt chloride and water vapor.

[tex]CoCl_2 . 4H_2O + 2H_2O -- > CoCl_2 + 6H_2O (heat)[/tex]

To learn more about magnesium sulfate click here https://brainly.com/question/12842749

#SPJ1

Household ammonia is an aqueous solution of ammonium hydroxide, as stated on the label. In the solution, water serves as the solvent and ammonium hydroxide as the solute.

The crisscross approach is an alternative to writing a valid formula for an ionic chemical. With this technique, each ion charge's numerical value is crossed across to form the subscript of the other ion. Charges' indicators are removed.

12.3 mL of ammonium hydroxide solution and 100 mL of deionized water are combined to create ammonium hydroxide, 2M solution. At room temperature, it appears as a colourless liquid with no odour.

To know more about ammonia visit:-

https://brainly.com/question/14672082

#SPJ1

The pH of a 0.42 M solution of carbonic acid ([tex]H_{2}CO_{3}[/tex]), which is a diprotic acid with Ka1 = 4.3 x [tex]10^{-7}[/tex] and Ka2 = 5.6 x  [tex]10^{-11}[/tex], is 3.37 (Option B).

The pH of a 0.42 M solution of carbonic acid can be calculated using the given values of Ka1 and Ka2. The relevant equation is:

[tex]H_{2}CO_{3} + H_{2}O[/tex] ⇌ [tex]H_{3}O^{+}[/tex] + [tex]HCO_{3}^{-}[/tex]

The first dissociation constant for carbonic acid is given by Ka1 = [[tex]H_{3}O^{+}[/tex]][[tex]HCO_{3}^{-}[/tex]]/[[tex]H_{2}CO_{3}[/tex]]. The second dissociation constant is given by Ka2 = [[tex]H_{3}O^{+}[/tex]][[tex]CO_{3} ^{2-}[/tex]]/[[tex]HCO_{3} ^{-}[/tex]].

To solve for pH, we need to set up an ICE table and calculate the concentration [tex]H_{3}O^{+}[/tex].

[[tex]H_{2}CO_{3}[/tex]]     [[tex]H_{3}O^{+}[/tex]]     [[tex]HCO_{3}^{-}[/tex]]     [[tex]CO_{3}^{2-}[/tex]]

0.42 M             0               0               0

- x                    +x              +x             +x

0.42-x              x                x               x

Using the first equilibrium expression and substituting the values, we get:

4.3 × [tex]10^{-7}[/tex] = (x)²/(0.42 - x)

x = [[tex]H_{3}O^{+}[/tex]] = 6.55 × [tex]10^{-4}[/tex] M

Using the second equilibrium expression and substituting the values, we get:

5.6 × [tex]10^{-11}[/tex] = (x)(x)/(0.42 - x)

x = [[tex]CO_{3}^{2-}[/tex]] = 2.36 × [tex]10^{-6}[/tex] M

Now, to calculate pH, we can use the following equation:

pH = -log[[tex]H_{3}O^{+}[/tex]]

pH = -log(6.55 × [tex]10^{-4}[/tex])

pH = 3.37

The pH of a 0.42 M solution of carbonic acid ([tex]H_{2}CO_{3}[/tex]), which is a diprotic acid with Ka1 = 4.3 x [tex]10^{-7}[/tex] and Ka2 = 5.6 x  [tex]10^{-11}[/tex], is 3.37. The correct option is B.

To learn more about carbonic acid, click here: https://brainly.com/question/28175742

#SPJ11

The system's final temperature is 295 °C, or 71.33 °F. To calculate the metal's heat capacity, use Q = smT. (Be remember to factor in the metal's mass, its mass in heat, and its change in temperature.

The following equation can be used to determine specific heat, abbreviated Cp: Cp=QmΔT When m is the material's mass, Q is the quantity of heat energy delivered to the substance, & T is the temperature change of the substance, we can write C p = Q m T.

Any type of calorimeter must be used in the laboratory to measure specific heat. A calorimeter is an insulated container with the ability to track changes in energy. To minimise energy gain or loss to or from the environment, the calorimeter is insulated.

To know more about mass visit:

https://brainly.com/question/15959704

#SPJ1

Yes, it is necessary to know the exact volume of water used to dissolve the KHP.

Why is it necessary to know the exact volume of water used to dissolve the KHP?

It is necessary to know the exact volume of water used to dissolve KHP because the volume of water used affects the concentration of the solution, which in turn affects the accuracy of the results obtained. To accurately determine the concentration of a solution, it is important to know the amount of solute (in this case khp) dissolved in a given volume of solvent (water).Therefore, if the volume of water used to dissolve the khp is not known, the concentration of the resulting solution will be unknown as well. This can lead to inaccurate results and make it difficult to compare data with other experiments or measurements. It is important to use precise measurements and follow experimental procedures accurately to ensure reliable results.

To learn more about the KHP, visit here:

https://brainly.com/question/29576872

#SPJ11

There are 118 elements on the periodic table.

The correct answers are

a) The balanced chemical equation is KOH(aq) + NiSO₄(aq) → Ni(OH)₂(s) + K₂SO₄(aq)

b) Ni(OH)₂.

c) KOH is the limiting reactant

d)1.854 g Ni(OH)₂

e) Concentration of K⁺ and SO₄²⁻ ions in solution is: 0.05333M

(a) The balanced chemical equation for the reaction that occurs can be written as:

KOH(aq) + NiSO₄(aq) → Ni(OH)₂(s) + K₂SO₄(aq)

(b) The precipitate that forms is Ni(OH)₂.

(c) To determine the limiting reactant, we need to calculate the number of moles of KOH and NiSO₄.

Number of moles of KOH = 0.200 mol/L × 0.100 L = 0.0200 mol

Number of moles of NiSO₄ = 0.150 mol/L × 0.200 L = 0.0300 mol

Since KOH and NiSO₄ react in a 1:1 molar ratio, KOH is the limiting reactant because it produces fewer moles of product than NiSO₄.

(d) To calculate the mass of Ni(OH)₂ precipitate formed, we first need to determine the number of moles of Ni(OH)₂ formed:

0.0200 mol KOH × (1 mol Ni(OH)2 / 1 mol KOH) = 0.0200 mol Ni(OH)₂

Therefore, the mass of Ni(OH)₂ formed can be calculated as:

0.0200 mol Ni(OH)2 × 92.71 g/mol = 1.854 g Ni(OH)₂

(e) The balanced chemical equation shows that K₂SO₄ and Ni(OH)₂ are the products of the reaction. To determine the concentration of each ion that remains in solution, we need to calculate the number of moles of each product formed.

Number of moles of K₂SO₄ = 0.0200 mol KOH × (1 mol K₂SO₄ / 1 mol KOH) = 0.0200 mol

Number of moles of Ni(OH)₂ = 0.0200 mol KOH × (1 mol Ni(OH)₂ / 1 mol KOH) = 0.0200 mol

Therefore, the concentration of K⁺ and SO₄²⁻ ions in solution is:

[K⁺] = 0.0200 mol / (0.100 L + 0.200 L) = 0.0533 M

[SO₄²⁻ ] = 0.0200 mol / (0.100 L + 0.200 L) = 0.0533 M

The concentration of Ni²⁺ ions in solution can be calculated by subtracting the number of moles of Ni(OH)₂ from the initial number of moles of NiSO₄:

Number of moles of Ni²⁺ = 0.0300 mol - 0.0200 mol = 0.0100 mol

[Ni2+] = 0.0100 mol / (0.100 L + 0.200 L) = 0.0267 M.

To learn more about  balanced chemical equation refer to:

brainly.com/question/28294176

#SPJ4

In nature, the structure of an object is often related to its function or properties because the shape of an object can affect how it interacts with other objects or substances.

This is true for molecules as well, where the arrangement of atoms and bonds can impact the molecule's chemical and physical properties.

For example, the shape of proteins is crucial to their function in biological systems. The three-dimensional structure of a protein determines its ability to interact with other molecules in the body, such as enzymes, hormones, or receptors. Even small changes in the protein's shape can have significant effects on its function, leading to diseases or disorders.

In summary, the shape of an object can have a significant impact on its function or properties, and this is true for molecules as well. Understanding the relationship between molecular shape and function is essential for many fields, including biochemistry, pharmacology, and materials science.

To know more about pharmacology, visit:

https://brainly.com/question/30308277

#SPJ1

The percent composition of Silicon dioxide ([tex]SiO_{2}[/tex]) is 46.7% silicon and 53.3% oxygen.

Silicon dioxide is а chemicаl compound thаt is composed of silicon аnd oxygen аtoms. It is аlso known аs silicа аnd is а commonly occurring minerаl.

In order to find the percent composition of silicon dioxide, we need to find out the percentаge of eаch element in the compound. First, we must find the molаr mаss of [tex]SiO_{2}[/tex].

Molаr mаss of [tex]SiO_{2}[/tex] = (аtomic mаss of Si x number of Si аtoms) + (аtomic mаss of O x number of O аtoms)

= (28.0855 g/mol x 1) + (15.9994 g/mol x 2)

= 60.0855 g/mol

Then, we must find the mаss of silicon in one mole of [tex]SiO_{2}[/tex].

Mаss of silicon in one mole of [tex]SiO_{2}[/tex] = (аtomic mаss of Si x number of Si аtoms) / molаr mаss of [tex]SiO_{2}[/tex]

= (28.0855 g/mol x 1) / 60.0855 g/mol

= 0.467 moles

Find the mаss of oxygen in one mole of [tex]SiO_{2}[/tex].

Mаss of oxygen in one mole of [tex]SiO_{2}[/tex] = (аtomic mаss of O x number of O аtoms) / molаr mаss of [tex]SiO_{2}[/tex]

= (15.9994 g/mol x 2) / 60.0855 g/mol

= 0.533 moles

Find the percentаge of silicon in [tex]SiO_{2}[/tex].

Percent composition of silicon in [tex]SiO_{2}[/tex] = (mаss of silicon in one mole of [tex]SiO_{2}[/tex] / molаr mаss of [tex]SiO_{2}[/tex]) x 100

= (0.467 moles / 1 mole) x 100

= 46.7%

Find the percentаge of oxygen in [tex]SiO_{2}[/tex].

Percent composition of oxygen in [tex]SiO_{2}[/tex] = (mаss of oxygen in one mole of [tex]SiO_{2}[/tex] / molаr mаss of [tex]SiO_{2}[/tex]) x 100

= (0.533 moles / 1 mole) x 100

= 53.3%

Therefore, the percent composition of Silicon dioxide ([tex]SiO_{2}[/tex]) is 46.7% silicon аnd 53.3% oxygen.

For more information about Silicon dioxide refers to the link: https://brainly.com/question/15412188

#SPJ11

In a system that contains multiple gaseous species at equilibrium, if the pressure of the system is decreased then the equilibrium will shifts towards the direction in which no of moles of gaseous substance is more.

According to Le Chatelier's principle if the pressure on a gas in a reaction is increased, the position of the equilibrium is shifted towards the side with less no of moles of gas molecules. On the other hand, if pressure is decreased then the equilibrium will shift towards the side of the equation which has more number of moles of substances.

If the volume is decreased, the reaction will shift towards the side which contains less moles of gaseous particles, whereas if the volume is increased the reaction will shift towards the side of the reaction containing more number of moles of gaseous substances.

To know more about equilibrium here

https://brainly.com/question/30751314

#SPJ4

The Bohr radius serves as the most likely separation between the electron and proton in the hydrogen atom's 2pz orbital which is 0.529 Å.

For the 2pz orbital of the hydrogen atom, the most probable distance between the electron and the proton can be determined using the radial probability distribution function.

The radial probability distribution function gives the probability of finding the electron at a certain distance from the nucleus. For the 2pz orbital, the function has a maximum at a distance of a0, which is the Bohr radius. The Bohr radius is equal to 0.529 Å, or approximately 5.29 x 10⁻¹¹ meters.

Therefore, the most probable distance between the electron and the proton in the 2pz orbital of the hydrogen atom is the Bohr radius, which is the distance at which the electron has the highest probability of being found.

To learn more about electron refer to:

brainly.com/question/28977387

#SPJ4

The statement "Solubility is how much solute will dissolve in solvent" is true.

Solubility refers to the maximum amount of a substance (solute) that can dissolve in a given amount of solvent at a specific temperature and pressure. The solubility of a substance can be influenced by several factors such as temperature, pressure, and the chemical nature of the solute and solvent.

When the maximum amount of solute has been dissolved in the solvent, the solution is said to be saturated. If more solute is added to a saturated solution, it will not dissolve and will instead precipitate out of the solution.

To know more about precipitate, visit :

https://brainly.com/question/18109776

#SPJ1

The concentration of silver ion after the reaction of 300 mL of a .2 molar solution of AgNO3 with 100 mL of a .05 molar solution of CaCl2 has gone to completion is 0.15 molar.

The equation for the reaction is: 2AgNO3 + CaCl2 → 2AgCl + Ca(NO3)2.

The molar concentration of the AgNO3 solution is 0.2 molar. When 300 mL of this solution is added to 100 mL of a 0.05 molar solution of CaCl2, the moles of AgNO3 will be 0.6 and the moles of CaCl2 will be 0.05.

When the reaction goes to completion, 0.6 moles of AgNO3 will produce 0.6 moles of AgCl. Therefore, the concentration of silver ions will be 0.6/400 mL, or 0.15 molar.

Learn more about concentration: https://brainly.com/question/2201903

#SPJ11

14.4 g of carbon are required. Since the coefficients of CH4 and CO2 are both 1, every mole of CH4 that is consumed results in the production of one mole of CO2.

It indicates that a mole of carbon atoms weighs 12 grammes and a mole of hydrogen atoms weighs one gramme (nearly exactly) (again, almost exactly). A mole of methane should weigh 16 grammes as it is made up of 1 mole of carbon and 4 moles of hydrogens.

1 mol C divided by 1 mol CH4 yields 1.2 moles of carbon.

1 mol C divided by 12 g C results in 14.4 grammes of C.

To know more about mole visit:-

brainly.com/question/26416088

#SPJ1