Answer: 4129.38 kPa
Explanation:
P=nRT/V= 25 molesx 8.314 x 298.15 / 15=
A liter of milk has a [H+] of about 2.51 × 10–7. (You may prefer to think of the hydronium ion concentration, [H3O+], as 2.51 × 10–7.) Use the formula for the calculation of pH provided and show each step as you calculate the pH of milk. In order to get full points you must show all the steps you take.
The pH of milk is approximately 6.6.
Steps
The formula for calculating pH is:
pH = -log[H+]
Given that [H+] of milk is about 2.51 × 10–7, we can substitute this value into the formula to calculate the pH:
pH = -log(2.51 × 10–7)
pH = -(-6.6)
pH = 6.6
Therefore, the pH of milk is approximately 6.6.
What is pH?A solution's acidity or basicity is determined by its pH. A pH of 7 indicates a neutral solution (equal concentration of H+ and OH- ions), a pH of less than 7 indicates an acidic solution (higher concentration of H+ ions), and a pH of greater than 7 indicates a basic or alkaline solution. It is defined as the negative logarithm of the hydrogen ion concentration [H+] in moles per liter (higher concentration of OH- ions).learn more about pH here
https://brainly.com/question/172153
#SPJ1
When the same amount of force is applied to a smaller area, how is pressure affected?
Answer:
The pressure is reduced since the area needed to be exerted on by pressure has also been reduced
When a force is applied to an object, what happens?
The object changes its color.
The object changes its shape.
The object changes its motion.
The object changes its state.
When a force is applied to an object, the object changes its state. Therefore, the correct option is option D.
What is force?A force is an effect in physics that enables the movement of something with mass that change its velocity and accelerate. It may represent a push or perhaps a pull, with the direction and magnitude always present, making this one a vector quantity. It really is measured in newtons (N) and is denoted by the sign F.
Newton's second law, in its original form, states that perhaps the net force exerted on an object is equivalent to the pace that its momentum varies with time. When a force is applied to an object, the object changes its state.
Therefore, the correct option is option D.
To learn more about force, here:
https://brainly.com/question/13014979
#SPJ1
How is s,p,d,f blocks related to the type of element and its properties?
grouping elements into s, p, d, and f blocks allows us to predict the chemical and physical properties of elements based on their electron configurations and periodic table positions.
The periodic table's s, p, d, and f blocks refer to the arrangement of electrons in the atom's outermost energy level (valence shell), and they are related to the element's type and properties in several ways.
Atomic size increases from right to left within a period and from top to bottom within a group.
Ionization Energy: The energy required to remove an electron from an atom is referred to as ionisation energy.
Electronegativity: The ability of an atom to attract electrons towards itself in a chemical bond is measured by electronegativity.
Reactivity: An element's reactivity is determined by the number of valence electrons it possesses. Because the s-block elements have one or two valence electrons, they are extremely reactive.
Chemistry: Ionic compounds are formed by s-block elements with nonmetals, whereas covalent compounds are formed by p-block elements.
learn more about Electronegativity here:
https://brainly.com/question/14481608
#SPJ4
Pls answer number 4, my grade depends on it
Answer: where are the photographs
Explanation:
Identify the Name, Symbol, number of protons, neutrons, and electrons in a neutral atom of each of the following: (Please refer to a periodic table):
Answer:
Carbon
Name: Carbon
Symbol: C
Number of protons: 6
Number of neutrons: 6 or 7 (Carbon has two stable isotopes with 6 or 7 neutrons)
Number of electrons: 6
Sodium
Name: Sodium
Symbol: Na
Number of protons: 11
Number of neutrons: 12 or 13 (Sodium has one stable isotope with 12 neutrons, and another with 13 neutrons)
Number of electrons: 11
Helium
Name: Helium
Symbol: He
Number of protons: 2
Number of neutrons: 2
Number of electrons: 2
Chlorine
Name: Chlorine
Symbol: Cl
Number of protons: 17
Number of neutrons: 18 or 20 (Chlorine has two stable isotopes with 18 or 20 neutrons)
Number of electrons: 17
Gold
Name: Gold
Symbol: Au
Number of protons: 79
Number of neutrons: 118 (Gold has only one stable isotope with 118 neutrons)
Number of electrons: 79
What is the mass of 2.007 moles of propane gas, C3H8?
Answer:
To calculate the mass of 2.007 moles of propane gas (C3H8), we need to first determine its molar mass.
The molar mass of propane (C3H8) can be calculated as:
3(C) + 8(H) = (3 x 12.01 g/mol) + (8 x 1.01 g/mol) = 44.11 g/mol
Therefore, the mass of 2.007 moles of propane is:
Mass = 2.007 moles x 44.11 g/mol = 88.46 g
So, the mass of 2.007 moles of propane gas (C3H8) is 88.46 g.
How many grams are in 4.50x1023 molecules of CO2? [Molar mass CO2 = 44.01 g/mol CO2]
7.48x10-11 g CO2
32.9 g CO2
44.01 g CO2
6.16x1045 g CO2
The mass of 4.5 moles of CO2 is 7.48x10-11 g CO2 Option b)
What are 4 types of moles mass?The ratio between the mass and the quantity of material (measured in moles) of any sample of a chemical compound is known as the molar mass (M) in chemistry. The molar mass of a material is a bulk characteristic rather than a molecular one. The compound's molar mass is an average over many samples, which frequently have different masses because of elements.
A terrestrial average and a result of the relative frequency of the isotopes of the component elements on Earth, the molar mass is most frequently calculated from the standard atomic weights. For changing between a substance's mass and quantity in bulk amounts, the molar mass is the proper unit.
Learn more about Molar mass
https://brainly.com/question/22997914
#SPJ1
What major type of weak interactions can asp have that are absent in chymotrypsin?
In the catalytic cycle, asp is capable of weak interactions with histidine that chymotrypsin does not have.
Throughout the catalytic cycle, Asp-102 maintains its negative charge. It establishes a salt bond with the protonated form of His-57 but not the deprotonated form, stabilizing the protonated form and boosting the histidine's affinity for protons.
The histidine residue interacts with aspartate and is oriented correctly as a result. Following that, histidine and serine's alcohol group may interact. Histidine changes serine from a weak nucleophile (alcohol) into a strong nucleophile by removing the hydrogen ion from the alcohol (alkoxide).
To know more about chymotrypsin, visit,
https://brainly.com/question/25752442
#SPJ4
what is the percent composition of salicylic acid?
The percent composition of salicylic acid is C7H6O3, or 60.87%C, 4.4%H, and 34.75%O
For parts of the free-response question that require calculations, clearly show the method used and the steps involved in arriving at your answers. You must show your work to receive credit for your answer. Examples and equations may be included in your answers where appropriate. 2 NO₂(g) +F₂(g) → NO₂F(g) AH-284 kJ/mol,zn NO₂(g) and F₂ (g) can react to produce NO₂F(g), as represented above. A proposed mechanism for the reaction has two elementary steps, as shown below. Step 1: NO₂+ F₂ NO₂F + F (slow) Step 2: NO₂+F NO₂F (fast)
(a) Write a rate law for the overall reaction that is consistent with the proposed mechanism.
Rate law for the overall reaction that is consistent with the proposed mechanism is k [NO₂] [F₂].
What is rate law expression?
It is an expression that provides a relationship between the rate of the reaction and the concentrations of the reactants participating in it multiplying with rate constant. Rate in rate law expression is decided according to slow step.
Example-
If a reaction given as A + B → C rate constant = k
rate = k [A] [B]
Given,
Step 1: NO₂+ F₂ → NO₂F + F (slow)
Step 2: NO₂+F → NO₂F (fast)
rate = k [NO₂] [F₂]
Therefore, rate law for the overall reaction that is consistent with the proposed mechanism is k [NO₂] [F₂].
Learn more about rate law expression, here:
https://brainly.com/question/14779101
#SPJ9
3. Predict the change in electronegativity of the next elements in a row (C, Si), then check those properties. Do they match your predictions?
The elements which come after 'C' and 'Si' are 'Ge' and 'Sn'. The element 'F' is the most electronegative element. Down the group the electronegativity generally decreases.
What is electronegativity?The electronegativity of an atom is defined as the relative tendency or power of the bonded atom in a molecule to attract the shared pair of electrons towards itself.
In general the electronegativity decreases on moving down a group. The increase in the size of atoms and the shielding effect of inner electrons decreases the electronegativity.
Here 'Ge' and 'Sn' comes below 'C' and 'Si'.
Thus the electronegativity of the elements after 'C' and 'Si' decreases.
To know more about electronegativity, visit;
https://brainly.com/question/14481608
#SPJ1
In science, what is it called when you have a statement that can be mathematically modeled, based
on repeated experimental observations, that describes some phenomenon of nature?
In science, a statement that can be mathematically modeled based on repeated experimental observations, that describes some phenomenon of nature, is called a scientific law. A scientific law is a descriptive statement that summarizes a pattern observed in nature, typically expressed as a mathematical equation or formula, which describes the behavior of a particular natural phenomenon under certain conditions. Scientific laws are generally considered to be well-established and reliable, based on the repeated empirical evidence and testing that supports them.
14.87 moles of Magnesium should form 14.87 moles of Magnesium Chloride. 14.77 moles of Hydrochloric acid should form 7.97 moles of Magnesium Chloride. Only 1.78 moles of Magnesium chloride is obtained. What is the percent yield?
PLEASE HELP and teach please
According the question the Percent yield is 11.99%
What is yield?Yield is an economic term referring to the income generated by an investment over a period of time. It is usually expressed as a percentage of the initial investment and is calculated by taking the total income earned and dividing it by the initial investment. Yield is an important measure of the performance of an investment, and is a key factor in determining the attractiveness of an investment. Yields can be calculated for individual investments, or for portfolios of investments. Yields can also be calculated for different types of investments, such as stocks, bonds, and mutual funds. Yields are also used to compare investments with different levels of risk, so investors can make informed decisions about their investments. Yields are affected by a variety of factors, including interest rates, inflation, and market conditions.
The percent yield can be calculated using the formula:
Percent yield = (Actual yield / Theoretical yield) * 100
For Magnesium Chloride, the theoretical yield is 14.87 moles, and the actual yield is 1.78 moles.
Therefore, the percent yield is:
Percent yield = (1.78 / 14.87) * 100 = 11.99%
To learn more about yield
https://brainly.com/question/25996347
#SPJ1
How do covalent bonds differ from ionic bonds?
Answer: Covalent bonds share electrons between two or more atoms. Ionic bonds form when two or more ions come together with charge differences.
Explanation:
Ionic bonds: atoms TRANSFER electrons
Covalent: atoms SHARE electrons
Explain how fossil fuels are formed from
living organisms on land and in sea.
Answer:
After millions of years underground, the compounds that make up plankton and plants turn into fossil fuels. Plankton decomposes into natural gas and oil, while plants become coal. Today, humans extract these resources through coal mining and the drilling of oil and gas wells on land and offshore.
Explanation:
Fossil fuels such as oil, coal and natural gas formed from living organisms on land and in sea are non-renewable resources created by the extinction of prehistoric plants and animals that are gradually being buried under rock layers.
Crude oil (also called crude oil or simply petroleum) is a fossil fuel formed from the remains of ancient marine organisms. After it died and sank to the bottom of the sea, the organic material mixed with other sediments and was buried.
Over the years, the rubble has been covered by layers of sand and silt. The heat and pressure of these layers helped turn the remains into what we now call oil or petroleum (fossil fuels).
To learn more about fossil fuels,
https://brainly.in/question/17658079
https://brainly.in/question/227555
How many liters of oxygen gas (at STP) are needed to burn 0.277L butane?
Explanation:
Refer to pic..........
Which statement best describes a pure substance? *
It has three visible phases.
It has constant physical properties.
It is heterogeneous.
It has variable composition.
The statement which best describes a pure substance is that it has constant physical properties which is therefore denoted as option B.
What is a Pure substance?This is referred to as a single kind of matter that cannot be separated into other kinds of matter by any physical means.
This type of sample of matter has both definite and constant composition and distinct chemical properties and is referred to as being homogeneous in nature with no form of impurities which is therefore the reason why it was chosen a the correct choice.
Read more about Pure substance here https://brainly.com/question/18452279
#SPJ1
Calculate the expected vapor pressure (in atm) for a solution prepared by dissolving 183. 0 g fructose in 500. 0 ml of water. Fructose is a nondissociating molecule, with a molar mass
The expected vapor pressure of the solution prepared by dissolving 183.0 g of fructose in 500.0 mL of water is approximately 0.0301 atm.
The mole fraction of water in the solution can be calculated as follows:
Moles of water = (volume of water in liters) x (density of water) / (molar mass of water)
Moles of water = (500.0 mL / 1000.0 mL/L) x (0.9982 g/mL) / (18.015 g/mol)
Moles of water = 27.722 mol
Moles of fructose = (mass of fructose) / (molar mass of fructose)
Moles of fructose = 183.0 g / 180.16 g/mol
Moles of fructose = 1.016 mol
The total moles of solute and solvent in the solution are:
Total moles = moles of water + moles of fructose
Total moles = 27.722 mol + 1.016 mol
Total moles = 28.738 mol
The mole fraction of water in the solution is:
Mole fraction of water = moles of water / total moles
Mole fraction of water = 27.722 mol / 28.738 mol
Mole fraction of water = 0.962
Using Raoult's Law, the expected vapor pressure of the solution can be calculated as:
Vapor pressure = mole fraction of water x vapor pressure of pure water
Vapor pressure = 0.962 x 0.0313 atm
Vapor pressure = 0.0301 atm
learn more about moles here:
https://brainly.com/question/28239680
#SPJ4
When 12 moles of O₂ reacts with 1.1 mole of C10H8 what is the limiting reactant? C10H8 + 12 O₂ -> 10 CO₂ + 4H₂O
O₂
Explanation:A limiting reactant is the reactant that runs out first in a reaction.
Oxygen
To find the limiting reactant, we can find how many reactions will occur with the given amount of reactant. To do this we can divide moles of the reactant by moles per reaction. If the reaction occurs 1 time, we say that 1 mol of reaction is created. So, the reactant that forms fewer moles of reaction is the limiting reactant.
Moles of reaction = [tex]\displaystyle \frac{12molO_{2} }{1}*\frac{1molrxn}{12mol_{2} }[/tex]= 1 mol[tex]_{rxn}[/tex]This means that with 12 moles of oxygen, 1 full reaction will occur (1 mol of reaction).
Naphthalene (C₁₀H₈)
Now, we can do the same equation with Naphthalene. If it creates fewer moles of reaction, then it is the limiting reactant. If not, then oxygen is the limiting reactant.
Moles of reaction = [tex]\displaystyle \frac{1.1molC_{10}H_{8} }{1} *\frac{1molrxn}{1molC_{10}H_{8}}[/tex] = 1.1 mol[tex]_{rxn}[/tex]This means that 1.1 moles of Naphthalene will create 1.1 mol of reaction.
Limiting Reactant
The math above shows that the amount of oxygen given will only create 1 mol of reaction, while the Naphthalene forms 1.1 mols of reaction. Thus, oxygen is the limiting reactant because it creates fewer moles of reaction.
One mole is a quantity unit that is always equal to __________________________.
Answer:
6.022 × 10²³ units of that substance
Explanation:
Please help! Ty
How many protons, neutrons,
and electrons are in this ion?
31 P3-
15
A. 15 p+, 16 nº, 18 e
B. 16 pt, 15 nº, 19 e
C. 15 pt, 16 nº, 15 e-
D. 15 pt, 16 nº, 12 e-
Explanation:
The symbol P represents the element phosphorus, which has an atomic number of 15, indicating that it has 15 protons in the nucleus. The ion is negatively charged with a 3- charge, which means it has three more electrons than protons.
To find the number of neutrons in an atom or ion, you need to know its mass number, which is the sum of protons and neutrons. Since the charge of the ion is not related to its mass, we can assume that the mass number is the same as that of the neutral phosphorus atom, which is approximately 31.
So, the number of protons, neutrons, and electrons in the P3- ion is:
Protons: 15
Neutrons: 31 - 15 = 16
Electrons: 15 + 3 = 18
Therefore, the P3- ion has 15 protons, 16 neutrons, and 18 electrons.
How many mol of CaSO3 were left after the water was driven off? To answer this, What is the molar mass of 1 mol of CaSO3?
Multiply the molar mass of 1 mol times the mass 7.00g to get mol.
There are 5 mol of CaSO3 were left after the water was driven off.
What is molar mass ?The molar mass is the substance; it helps to determine the mass of the sample substance to the atom of the sample or substance. The molar mass depends on the molecular formula and the isotopes of the atom. Molar mass is used for the inducement of electric charge. Molar mass is the measurement of the volume of the mass.
What is moles?
A mole is the atom's elementary particle, an ion. The mole of the substance is always related to the Avogadro number. The mole is always associated with the weight or mass of the element or substance. The standard unit of a mole is mol. The mole is a significant factor of the reactant and products to form an equation. A mole calculates the atom, ion, and substance weighs.
Therefore, are 5 mol of CaSO3 were left after the water was driven off.
Learn more about molar mass from the given link.
https://brainly.com/question/837939
#SPJ1
Potassium chlorate (KClO3) will decompose to potassium chloride (KCl) and oxygen (O2) in the reaction shown:
2KClO3(s) → 2KCl(s) + 3O2(g)
A chemist allows 20.0 grams of KClO3 to decompose and captures 6.7 grams of O2 as a
result.
Answer:
Explanation:
Theoretical yield is 7.9 g O2
% yield is actual/theoreticalx 100 = 6.7/7.9 X 100= 84.81 % O2
2. When a bubble escapes form a sunken ship, it has a volume of 12.0ml at a pressure of 400.0 atm. and a temp.. of -3.00°C. It reaches the surface where the pressure is 1.10 atm. and the temperature is 27.0°C. What is its new volume? ( round the answer to nearest tens for sig figs)
Answer: 4848.22 mL
Explanation:
V2= P1V1T2/(T1 P2) = (400.00 X 12.0 X 300.15)/(270.15 x 1.10)
How many Hydrogen atoms in the formula 4H3O2
Answer:
Three atoms of Hydrogen.
Explanation:
There are four molecules of three Hydrogen atoms and two oxygen atoms.
Hope it helps.
If the brine contains 138 g of NaCl, how much Cl2 can be produced?
Answer:
167.5g
Explanation:
From the question, we know the mass of NaCl and the molar mass of NaCl, so we can calculate the number of moles of NaCl:
Moles = mass ÷ molar mass
The molar mass of NaCl can be calculated by adding the relative formula masses of the elements Na and Cl:
23.0 + 35.5 = 58.5
We can use the formula to find the number of moles of NaCl:
moles = 138 ÷ 58.5
= 2.35897...
Now, we need to find the mass of Cl2. Rearranging the formula of moles = mass ÷ molar mass
mass = moles × molar mass
Calculating the molar mass of Cl2 by adding the relative atomic masses:
35.5 + 35.5 = 71
Hence the mass is:
2.35897... × 71 = 167.5g (to 1dp)
PLEASE HELP!!
Classify each reaction as synthesis, decomposition, single replacement, double
replacement, or combustion.
>
NaOH + CuSO4 → Na2 SO4 + Cu(OH)2
C12H22O11 + O2CO2 + H₂O
NH4NO3 → N₂O + H₂O
BaCl2 + Na2 SO4 → BaSO4 + NaCl
1. synthesis
2. decomposition
3.single
4double displacement
5.combustion
Answer:
NaOH + CuSO₄ → Na₂SO₄ + Cu(OH)₂ is a double displacement reaction
C₁₂H₂₂O₁₁ + 12O₂ --> 12CO₂ + 11H₂O. This is a combustion reaction, as it involves a fuel reacting with oxygen to form carbon dioxide and water. However, this is not a balanced equation and so I have added in the correct ratios to balance the equation.
NH₄NO₃ → N₂O + 2H₂O. This is a decomposition reaction, as it involves the compound ammonium nitrate, 'decomposing' or breaking down into smaller components: dinitrogen oxide and water
BaCl₂ + Na₂SO₄ → BaSO₄ + 2NaCl. This is a double replacement reaction
Marble (calcium carbonate) reacts with hydrochloric acid solution to form calcium
chloride solution, water and carbon dioxide. What is the percent yield of carbon dioxide
if 3. 65 g of the gas is collected when 10. 0 g marble reacts?
The percent yield of carbon dioxide if the 3.65 g of the gas is collected when the 10.0 g marble reacts is react with the HCl is 83 %.
The chemical reaction is as follows :
CaCO₃ (aq) + 2HCl (aq) ----> CaCl₂ (aq) + H₂O (l) + CO₂(g)
The mass of the CaCO₃ = 10 g
The molar mass of the CaCO₃ = 100.09 g/mol
The moles of the CaCO₃ = 10 / 100.09
The moles of the CaCO₃ = 0.0999 mol
The molar ratio of the carbon dioxide and the calcium carbonate = 1 : 1
The moles of the carbon dioxide = 0.0999 mol
The mass of the carbon dioxide = moles × molar mass
The mass of the carbon dioxide = 0.0999 × 44
The mass of the carbon dioxide = 4.40 g
The percent yield = ( actual yield / theoretical yield ) × 100 %
The percent yield = ( 3.65 / 4.40 ) × 100 %
The percent yield = 83 %
To learn more about percent yield here
https://brainly.com/question/13131045
#SPJ4
What mass og MgO is neded to produce 9. 38g of Na2O?
2NaCl+MgO=Na2O+MgCl2
The 6.10 g of MgO (Magnesium oxide) is needed to produce 9.38 g of Na2O(Sodium oxide).
To solve this problem, we need to use stoichiometry to relate the mass of Na2O produced to the mass of MgO used.
From the balanced chemical equation:
2 NaCl + MgO → Na2O + MgCl2
We can see that 1 mole of MgO produces 1 mole of Na2O. We can use the molar mass of Na2O to convert the given mass of Na2O to moles:
9.38 g Na2O x (1 mol Na2O / 61.98 g Na2O) = 0.1514 mol Na2O
Since 1 mole of MgO produces 1 mole of Na2O, we know that we need 0.1514 mol MgO to produce 0.1514 mol Na2O. Using the molar mass of MgO, we can convert this to mass:
0.1514 mol MgO x (40.31 g MgO / 1 mol MgO) = 6.10 g MgO
Therefore, 6.10 g of MgO is needed to produce 9.38 g of Na2O.
For such more questions on Stoichiometry
https://brainly.com/question/14935523
#SPJ4
Note: The question would be as
What mass of MgO is neded to produce 9. 38g of Na2O?
2NaCl+MgO=Na2O+MgCl2