What percent of 15 is 5?

The number of hot dogs is 100 while the number of snacks is 75. And it is found by using linear equation.

A linear equation is an algebraic equation of the form y=mx+b, where m is the slope and b is the y-intercept, and only a constant and a first-order (linear) term are present. The variables in the previous sentence, y and x, are referred to as a "linear equation of two variables" at times.

The linear equation to solve the question will be:-

h+s= 175 ------(1)

2.50h + 0.75s = 262.50 -----(2)

From equation (1), s= 175-h -----(3)

Put qeauation (3) into (2) :-

2.50h + 0.75 = 262.50

2.50 + 0.75 (175-h) = 262.50

2.50 + 131.25 - 0.75 = 262.50

Collect like terms :-

2.50-0.75= 262.50-131.25

1.75= 131.25

h= 131.25/1.75

h= 75

To know more about Linear equation go through:-

https://brainly.com/question/28732353

#SPJ4

If workers in Alpha are more productive than those in Omega, they may be able to accomplish more work in the same amount of time, resulting in more total annual hours of work in Alpha. This could be due to a variety of factors, such as differences in technology, education levels, or infrastructure.

There could be several reasons why the total annual hours of work are much greater in Alpha than in Omega, even though both countries have identically sized working-age populations. Here are two possible reasons:

Differences in labor force participation: It is possible that a larger proportion of the working-age population in Alpha is participating in the labor force than in Omega. Labor force participation refers to the percentage of the working-age population that is either employed or actively seeking employment. If more people in Alpha are working or looking for work, then the total annual hours of work would be higher in Alpha than in Omega.

Differences in productivity: Another possible reason for the difference in total annual hours of work is differences in productivity levels between Alpha and Omega. Even if both countries have the same number of people in their working-age population, the productivity of those workers can vary significantly. If workers in Alpha are more productive than those in Omega, they may be able to accomplish more work in the same amount of time, resulting in more total annual hours of work in Alpha. This could be due to a variety of factors, such as differences in technology, education levels, or infrastructure.

Learn more about factor here

https://brainly.com/question/29128446

#SPJ4

The value of sides b for different value of a  in a rectangle are;

a=2 and b=7

a=1/3 and b=42

A rectangle is a type of quadrilateral with four sides and four right angles (90-degree angles). It is a two-dimensional shape with opposite sides that are parallel and equal in length. The opposite sides of a rectangle are also perpendicular to each other, which means they meet at 90-degree angles.

A = l x w, where A is the area, l is the length, and w is the width, calculates the area of a rectangle.

In this case, we are given that the area is 14 square units, so we can set up the equation:

14 = a x b

Given;

a=2

Using this value as a replacement in the formula, we obtain:

14 = (2) x b

b=7

Taking another value of a=1/3

Using this value as a replacement in the formula, we obtain:

14=1/3×b

b=42

Therefore, The value of b for different value of a are;

a=2 and b=7

a=1/3 and b=42

To know more about parallel, visit:

https://brainly.com/question/16853486

#SPJ9

To estimate a population proportion with a margin of error of 1% and a 99% confidence interval, we would need a sample size of at least 6644 individuals.

The formula to calculate the sample size is:

n = [z² x p(1-p)] / e²

where:

n is the sample size

z is the z-score corresponding to the desired confidence level (in this case, 2.576 for a 99% confidence level)

p is the planning value for the population proportion, which we don't know in this case, so we will assume the worst-case scenario of p=0.5 (which gives us the maximum sample size needed)

e is the desired margin of error

Plugging in the values, we get:

n = [(2.576)² x 0.5(1-0.5)] / (0.01)²

n = 6643.04

Since we need to round up to the next whole number, the minimum sample size needed is 6644.

To know more about confidence interval here

https://brainly.com/question/24131141

#SPJ4

the center of dilation for the triangle is (0,0)

The center of dilation is a point in a plane about which a dilation, a type of transformation, is performed. A dilation is a transformation that changes the size of a geometric figure, while preserving its shape and orientation. The center of dilation is the fixed point that serves as the reference for the scaling or shrinking of the figure.

In a dilation, each point of the original figure is moved away from or towards the center of dilation, by a certain factor called the scale factor.  

The coordinate of yellow triangle and scaled triangle both passes through center of axes.

So, the center of dilation is (0,0).

To know more about transformation, visit:

https://brainly.com/question/11352944

#SPJ1

Answer:

Using the Pythagorean theorem, we know that:

a^2 + b^2 = c^2

where a and b are the legs of the right triangle, and c is the hypotenuse.

We can plug in the values given:

9^2 + b^2 = 18^2

Simplifying:

81 + b^2 = 324

b^2 = 243

b = sqrt(243) = 15.6 (rounded to the nearest tenth)

Therefore, the length of the other leg is approximately 15.6 cm.

Step-by-step explanation:

BRAINLIEST PLEASE!

The value of x is 2 inches.

We are given that the area of the square is 16 square inches and can be represented by the expression,

(x+2)^2 - 16 = 0

We can simplify this equation by expanding the square,

x^2 + 4x + 4 - 16 = 0

x^2 + 4x - 12 = 0

Now we can use the quadratic formula to solve for x

x = (-b ± sqrt(b^2 - 4ac)) / 2a

Where a = 1, b = 4, and c = -12.

Plugging in these values, we get

x = (-4 ± sqrt(4^2 - 4(1)(-12))) / 2(1)

x = (-4 ± sqrt(16 + 48)) / 2

x = (-4 ± sqrt(64)) / 2

x = (-4 ± 8) / 2

We get two solutions,

x = (-4 + 8) / 2 = 2

x = (-4 - 8) / 2 = -6

Since we are dealing with the length of a side of a square, we can eliminate the negative solution and conclude that the value of x is 2 inches.

Learn more about area here

brainly.com/question/27934373

#SPJ4

The given question is incomplete, the complete question is:

The length in inches of each side of a square is given by the expression x + 2 . the area of the square can be represented by (x+2)^2−16=0 when the area is 16 square inches. what is the value of x?

∠1 + ∠2 = 180

Substituting the given expressions for ∠1 and ∠2:

8x + (2x - 3) = 180

Simplifying and solving for x:

10x - 3 = 180

10x = 183

x = 18.3

Now we can substitute x back into the expression for ∠1 to find its measure:

∠1 = 8x = 8(18.3) = 146.4 degrees.

Therefore, if ∠1 and ∠2 add up to 180 degrees and ∠1 is given as 8x° and ∠2 is given as (2x - 3)°, then ∠1 measures 146.4 degrees

Answer:

<1=146.4

<2=34.6

Step-by-step explanation:

<1+<2=180 degrees

So,

8x+(2x-3)=180

10x-3=180

10x=183

X=18.3

subsitute:

<1=8x

<1=8(18.3)

<1=146.4

<2=2x-3

<2=2(18.3)-3

<2=34.6

Coupling tetraalkylammonium and ethylene glycol ether side chain is an effective method to enable highly soluble anthraquinone-based ionic species for nonaqueous redox flow battery. The side chains of the tetraalkylammonium are modified with the ethylene glycol ether, which is a highly polar solvent, allowing for better solubility in nonaqueous electrolyte solutions. Additionally, the ethylene glycol ether has the ability to modify the stability of the ionic species, preventing aggregation and ensuring the longevity of the battery. This increases the redox capacity and enhances the performance of the flow battery.

The ethylene glycol ether-tetraalkylammonium coupling has been proven to be an effective method for improving the solubility and stability of anthraquinone-based ionic species. For example, it has been observed that the coupling of ethylene glycol ether to anthraquinone-based ionic species enhanced the current density of the battery by more than 3 times. Furthermore, the coupling process has also been found to improve the energy efficiency and storage capacity of the nonaqueous redox flow battery.

Overall, coupling tetraalkylammonium and ethylene glycol ether side chain is an effective method for enabling highly soluble anthraquinone-based ionic species for nonaqueous redox flow battery. This process has been proven to improve the performance of the battery, including current density, energy efficiency, and storage capacity.

for such more questions on solubility

https://brainly.com/question/23946616

#SPJ11

The value of the exact surface area of the cone is 360π

To find the surface area of a cone, we need to calculate the area of the circular base and the curved lateral surface.

The radius of the circular base can be found using the Pythagorean theorem:

r = √(s^2 - h^2)

where s is the slant height and h is the height.

In this case, we have:

r = √(26^2 - 24^2)

r = 10

So, the surface area is

S = πr² + πrl

This gives

S = π * 10² + π * 10 * 26

S = 360π

Hence, the exact surface area of the cone is 360π

Read more about surface area at

https://brainly.com/question/76387

#SPJ1

The confidence level of the CI is 95%.

The formula for the confidence interval of a normal distribution is

CI = X ± Zα/2 × σ/√n

Where

CI is the confidence interval

X is the sample mean

Zα/2 is the Z-score corresponding to the desired confidence level α/2

σ is the population standard deviation

n is the sample size

We know that the width of the confidence interval is 3.4, so

3.4 = 2 × Zα/2 × σ/√n

We also know that σ = √22 = 4.69, X = 25, and n = 15. Plugging these values into the equation and solving for Zα/2

3.4 = 2 × Zα/2 × 4.69/√15

Zα/2 = 1.96

The Z-score corresponding to a 95% confidence level is 1.96. Therefore, the confidence level of the CI is 95%.

Learn more about confidence interval here

brainly.com/question/29680703

#SPJ4

Answer:

b/c

Step-by-step explanation:

sin B = opp/hyp

sin B = b/c

The resolution (n) is an important factor when specifying the smallest ton. If the TPWM (time-proportional width modulation) doubles and the ton (time-on) remains the same, the resolution will also double.

This is because the same amount of time (ton) is distributed over twice the pulses (TPWM).

To better understand this, imagine having 10 slices of a cake and trying to divide them into 2 even halves. You can achieve that by cutting each slice into 2 parts. The same logic applies to TPWM and ton.

TPWM represents the number of “slices” and ton represents the “time” allotted to each slice. When TPWM doubles, resolution (n) doubles as well. This is because twice the number of pulses (TPWM) are spread over the same time (ton), meaning that each pulse gets a smaller amount of time (a higher resolution).

The resolution (n) is inversely proportional to TPWM, meaning that if TPWM increases, resolution decreases, and if TPWM decreases, resolution increases. Thus, when TPWM doubles and ton remains the same, resolution (n) doubles as well.

See more about TPWM at: https://brainly.com/question/28347228

#SPJ11

There are 3 adults in the family by using the method of substitution and elimination.

Substitution is a method used in mathematics to replace one or more variables in an equation or expression with a value or expression that is equivalent to the variable(s). This is done in order to simplify an equation or expression or to solve for a variable.

Elimination is a method used in mathematics to solve a system of equations by eliminating one variable. This method involves manipulating the equations in such a way that one of the variables is eliminated, leaving a simpler equation with only one variable that can be solved easily.

In the given question,

Here's how we can solve for x, the number of adults:

Multiply the first equation by 2 to get rid of the coefficient of x in the second equation:

12x + 10y = 56

10x + 14y = 58

Subtract the first equation from the second equation to eliminate y:

10x + 14y - (12x + 10y) = 58 - 56

-2x + 4y = 2

Divide both sides by -2 to isolate x:

x - 2y = -1

x = 2y - 1

Substitute x = 2y - 1 into one of the original equations (let's use the first one) and solve for y:

6x + 5y = 28

6(2y - 1) + 5y = 28

12y - 6 + 5y = 28

17y = 34

y = 2

Substitute y = 2 into the equation x = 2y - 1 to solve for x:

x = 2(2) - 1

x = 3

Therefore, there are 3 adults in the family.

To know more about elimination method, visit:

https://brainly.com/question/29150442

#SPJ1

The line that models the data points better is Red, because it goes through one of the points.

Data is information that has been organized and processed in a meaningful way. It is the raw material of digital systems and the foundation of all computer-based operations. It can be stored, retrieved, and manipulated in a variety of ways, and it is used to generate insights, drive decisions, and build solutions. Data can come from a variety of sources, including manual entry, sensors, databases, and the internet.

This is a better model than Blue, because the data points are not all close to the line, and having the line go through one of the points ensures that the line is better representing the points. Additionally, having three points above the line and three points below the line helps to make the line a better model of the data points, as it is more evenly distributed.

To know more about data click-
https://brainly.com/question/14592520
#SPJ1

The total cost of the laptop with the sales tax included is 938.18.

The total cost of the laptop with the sales tax included is the sum of the original price and the tax amount. The formula to calculate the total cost is given below:

Total Cost = Original Price + (Original Price * Sales Tax Rate)

In this case, the Original Price is 882.99 and the Sales Tax Rate is 6.25%. Therefore, the Total Cost of the laptop with the sales tax included is calculated as follows:

Total Cost = 882.99 + (882.99 * 0.0625)

Total Cost = 882.99 + 55.19

Total Cost = 938.18

Rounding to the nearest cent, the total cost of the laptop with the sales tax included is 938.18.

Learn more about total cost here:

https://brainly.com/question/6506894

#SPJ4

In Triangle ABC, we can draw a circle around each vertex of the triangle.

If the radii of all three circles are equal, then Triangle ABC is an equilateral triangle.

Radii is the plural form of radius. It is half of the diameter and the length of the radius is used to calculate the area and circumference of the circle.

To determine whether a triangle is an equilateral triangle, we can use circles.

In this method, we draw three circles, one around each vertex of the triangle.

We then measure the radii of the circles, ensuring that they are all equal. If the radii of the three circles are equal, then the triangle is an equilateral triangle.

In Triangle ABC, we can draw a circle around each vertex of the triangle. Then, we could use a measuring tool to measure the radii of each circle. If the radii of all three circles are equal, then Triangle ABC is an equilateral triangle.

This method of using circles to determine whether a triangle is an equilateral triangle is simple and efficient. It does not require any complex calculations, and it is easy to understand.

For more questions related to equilateral triangle

https://brainly.com/question/17264112

#SPJ1

The population of the city will be approximately 597,543 people after 11 years.

We can solve this problem using the formula for exponential growth:

[tex]N = P(1 + r)^t[/tex]

where:

N = final population

P = initial population

r = annual growth rate (as a decimal)

t = number of years

In this case, we have:

P = 370,000

r = 0.0475 (since the annual growth rate is 4.75%)

t = 11

Substituting these values into the formula, we get:

[tex]N = 370,000(1 + 0.0475)^{11}[/tex]

Using a calculator, we can simplify this expression to:

N = 597,542.64

Learn more about exponential here https://brainly.com/question/28596571

#SPJ4

The confidence interval for variance is (0.29,0.58)

A family of continuous probability distributions is known as the chi-square (X2) distribution. They are frequently employed in hypothesis tests, such as the chi-square test of independence and the goodness of fit test.

The parameter k, which stands for the degrees of freedom, determines the shape of a chi-square distribution.

The distribution of real-world observations rarely has a chi-square shape. Chi-square distributions are primarily used for testing hypotheses rather than for modeling actual distributions.

Since we have given that the sample size n= 54,

variance = 0.44

we need to find a 98% confidence interval to estimate the variance.

So, we will use Chi-square distribution,

For this, we will find

df=n-1 = 54-1 = 53,

the interval would be,

[tex]\frac{(n-1)s^2}{X^2_{\alpha/2}} < \sigma^2 < \frac{(n-1)s^2}{X^2_{1-\alpha/2}}\\\\\alpha=1-0.98=0.02\\\\\alpha/2=0.02/2=0.01\\X^2_{0.01,53}=79.84\\Similarly\\\\1-\alpha/2=0.99\\\\X_{1-\alpha/2}^2,df=X^2_{0.99,53}=40.308\\\\So,\\\frac{53*0.44}{79.84} < \sigma^2 < \frac{53*0.44}{40.308}\\\\0.29 < \sigma^2 < 0.58[/tex]

Hence the confidence interval is (0.29,0.58)

learn more about chi-square distribution.

https://brainly.com/question/30259945

#SPJ4

The expression 3x-(4-x) is equivalent to 4x-4

The distributive property is a mathematical property that describes the relationship between multiplication and addition or subtraction. It states that when a number is multiplied by a sum or difference of two or more numbers, the result is the same as if we multiplied the number by each of the individual terms inside the parentheses and then added or subtracted the products.

To simplify the expression 3x-(4-x), we can distribute the negative sign to the second term inside the parentheses, which gives:

3x - (4 - x) = 3x - 4 + x

Now we can combine the like terms (3x and x) to get:

3x - 4 + x = 4x - 4

Learn more about distributive property here

brainly.com/question/6276874

#SPJ4

The given question is incomplete, the complete question is:

Which expression is equivalent to 3x-(4-x)?

After considering the following hypothetical survey results of 18- to 34-year-olds in a certain country, in response to the question "Are you currently living with your family?" we get the following probabilities.

a. The joint probability table for the given data is:

             Yes      No      Totals

Men          0.212   0.282   0.494

Women        0.184   0.322   0.506

Totals       0.396   0.604   1

b. The marginal probabilities for living with family and not living with family are:

                 Yes No

Men        0.212 0.282

Women 0.184 0.322

Totals 0.396 0.604

c. The probability of living with family given you are an 18- to 34-year-old man in the U.S. is 0.212/0.396 = 0.5354 or approximately 53.54%.

d. The probability of living with family given you are an 18- to 34-year-old woman in the U.S. is 0.184/0.506 = 0.3636 or approximately 36.36%.

e. The probability of an 18- to 34-year-old in the U.S. living with family is 0.396 or 39.6%.

f. We cannot determine whether the sample is representative solely based on the percentage of males in the survey.

A good representative sample should be randomly selected to accurately reflect the population being studied. The percentage of males in the sample is relevant only if it differs significantly from the percentage of males in the population being studied.

The joint probability table was developed for the survey results of 18- to 34-year-olds on living with family. Marginal probabilities were calculated and the probability of living with the family was found for both men and women. The overall probability of living with the family was also determined. It is unclear if the sample is representative without additional information.

Learn more about probability

https://brainly.com/question/24756209

#SPJ4

Answer: b

Step-by-step explanation:

If a lawn sprinkler sprays water 7 feet in every direction as it rotates, the area of the watered lawn is approximately 153.94 square feet.

Assuming the sprinkler is placed at the center of the lawn, the area of the watered lawn can be found by calculating the area of a circle with a radius of 7 feet. The formula for the area of a circle is A = πr^2, where A is the area and r is the radius.

Plugging in the given value of the radius, we get:

A = π(7 feet)^2

A = 153.94 square feet (rounded to two decimal places)

It's important to include the correct unit of measure, which is square feet in this case, to avoid confusion.

To learn more about area click on,

https://brainly.com/question/26914967

#SPJ4

Answer:

To calculate the total milk yield in one year, we need to multiply the number of dairy cows by the amount of milk each cow produces per year:

Total milk yield = 2650 dairy cows × 2320 gallons of milk per cow per year

Total milk yield = 6,188,000 gallons per year

To write this answer in scientific notation, we need to express the number 6,188,000 as a number between 1 and 10 multiplied by a power of 10. We can do this by moving the decimal point to the left until we have a number between 1 and 10, and counting the number of decimal places we moved. In this case, we need to move the decimal point 6 places to the left:

Total milk yield = 6.188 × 10^6 gallons per year

Therefore, the dairy farm yields 6.188 × 10^6 gallons of milk per year.

The 12 of each type of the ring would give max profit for the company.

Let x = number of VIP rings: let y = number of SST rings

:

The total production inequality;

x + y =< 24

y = 24 - x; arranged to plot graph (purple)

:

The labor inequality;

3x + 2y =< 60

2y = 60 - 3x

y = 60/2 - (3/2)x

y = 30 - 1.5x; arranged to plot the graph (red).

From the graph, the 3 corners of the area of feasibility (at or below the lines whichever is lower):

: x/y;.....profit on each type;... total profit

0,24; 40(0) + 35(24) = 0 + 840 = $840

12,12; 40(12) + 35(12) = 480 + 420 = $900

20,0; 40(20) + 35(0) = 800 + 35(0) = $800.

Therefore, the 12 of each type of the ring would give max profit for the company.

Read more about max profit

brainly.com/question/30281964

#SPJ1

From the given information provided, there were 311 children who swam at the pool that day.

Let's use C to represent the number of children who swam at the pool and A to represent the number of adults who swam at the pool.

From the problem, we know that:

C + A = 402 (Equation 1) (The total number of people who used the pool was 402)

1.50C + 2.00A = 648.50 (Equation 2) (The total receipts from admission were $648.50)

To solve for C and A, we need to eliminate one of the variables. We can do this by multiplying Equation 1 by 1.50, which will give us:

1.50C + 1.50A = 603 (Equation 3)

Now we can subtract Equation 3 from Equation 2 to eliminate C:

2.00A - 1.50A = 648.50 - 603

0.50A = 45.50

A = 91

So there were 91 adults who swam at the pool that day. To find the number of children, we can substitute A = 91 into Equation 1:

C + 91 = 402

C = 311

Learn more about variable here: brainly.com/question/82796

#SPJ4

The truth regarding the conditions for constructing a confidence interval for a population mean for the real estate market is that E. All conditions have been met.

For a confidence interval to be construction, sample should be randomly selected, sample size should be no more than 10% of the population size, and the sampling distribution should be approximately normal. This can be achieved if the sample size is large (typically n ≥ 30) and the data doesn't have strong skewness or outliers.

The question states that the realtor is working in a large city, and it is reasonable to assume that 100 home sales are less than 10% of all homes sold in the previous 6 months in this large city. So, this condition is met.

The realtor has randomly selected 100 home sales, so the random condition is met. All conditions have therefore been met to construct a confidence interval.

Find out more on confidence intervals at https://brainly.com/question/29576113

#SPJ1

Options for this question include:

The air speed of a small airplane during the first 25 seconds of takeoff and flight can be modeled by Newton's Second Law of Motion.

According to Newton's Second Law of Motion, the rate of change of the airplane's momentum is equal to the sum of all the forces acting on the airplane. As the plane takes off and accelerates, the thrust of the engines acting in the forward direction causes the plane's momentum to increase. This increase in momentum results in an increase in air speed. The air resistance acting against the motion of the plane is another force that affects the plane's speed. As the plane accelerates, the air resistance increases, and the plane's speed decreases.

In summary, the air speed of a small airplane during the first 25 seconds of takeoff and flight can be modeled by Newton's Second Law of Motion, where the thrust of the engines and air resistance act as forces that influence the plane's air speed.

For more such questions on Newton's Second Law of Motion.

https://brainly.com/question/13447525#

#SPJ11

The area of the polygon with vertices P(1,2), Q(1,4), R(-1,6), and S(-3,2) is given as 10 units. Option B

We can find the area of the polygon with the given vertices by dividing it into triangles and adding their areas.

One way to divide the polygon into triangles is to draw a diagonal from vertex P to vertex R. This creates two triangles, PQR and PRS.

[tex]\frac{1 }{2} ((4 - 2) + (6--4) + (-2 - - 18) + (-6 - 2)[/tex]

= 1 / 2 ( 2 + `10 + 16 - 8)

= 1 / 2 ( 20

= 10

The area of the polygon is 10 units

Read more on polygons here:https://brainly.com/question/1592456

#SPJ1