The patterns in the periodic table concerning protons, electrons, and valence electrons can help us understand the properties of elements, including whether they are metals or nonmetals. The position of an element in the table and the number of valence electrons it possesses are crucial factors in determining its behavior and reactivity.
Patterns in the periodic table in terms of protons, electrons, and valence electrons, and how these might relate to an element being a metal or nonmetal.
In the periodic table, you'll notice the following patterns:
1. The number of protons (also known as the atomic number) increases by one from left to right across a period and down a group. This is because each element has one more proton than the element before it.
2. The number of electrons in a neutral atom is equal to the number of protons, so the electron count also increases by one across a period and down a group.
3. Valence electrons are the outermost electrons of an atom, and they play a significant role in chemical bonding. As you move from left to right across a period, the number of valence electrons increases from 1 to 8. In contrast, when you move down a group, the number of valence electrons remains the same.
Now, let's discuss how these patterns relate to an element being a metal or nonmetal:
1. Metals are typically found on the left side of the periodic table, while nonmetals are on the right side. This is because metals generally have fewer valence electrons (1 to 3) and are more likely to lose them in a chemical reaction. Nonmetals have more valence electrons (4 to 8) and are more likely to gain or share them.
2. The number of valence electrons determines the reactivity and bonding behavior of elements. Metals with fewer valence electrons are more reactive, while nonmetals with more valence electrons are less reactive.
In conclusion, the patterns in the periodic table concerning protons, electrons, and valence electrons can help us understand the properties of elements, including whether they are metals or nonmetals. The position of an element in the table and the number of valence electrons it possesses are crucial factors in determining its behavior and reactivity.
To know more about metal and nonmetal :
https://brainly.com/question/13963963
#SPJ11
If you have a 6. 2 L container with a pressure of 1. 5 atm, how many moles are present if the temperature is 38 o C? (0. 0821 L atm/mol K)
a
2. 28
b
0. 28
c
0. 31
d
0. 36
Correct option is d)0.36
To find the number of moles present, we can use the Ideal Gas Law formula:
PV = nRT
Where:
P = pressure (1.5 atm)
V = volume (6.2 L)
n = number of moles (which we need to find)
R = gas constant (0.0821 L atm/mol K)
T = temperature in Kelvin (38°C + 273.15 = 311.15 K)
Rearranging the formula to solve for n:
n = PV / RT
Plugging in the given values:
n = (1.5 atm * 6.2 L) / (0.0821 L atm/mol K * 311.15 K)
n ≈ 0.36 moles
Th answer is: d) 0.36
To know more about Ideal Gas Law:
https://brainly.com/question/27870704
#SPJ11
A gas with a constant volume had an original pressure of 1150 torr and a
temperature of 75. 0 "C. Pressure was decreased to 760 torr. What is the final
temperature of the gas?
A) -43. 0°C
B) 49. 6°C
C) 230°C
D) -251°C
The ideal gas law states that the pressure of a gas is directly proportional to its temperature when held at a constant volume. This means that when the pressure is decreased, the temperature must also decrease.
To calculate the new temperature, use the equation P1/T1 = P2/T2, where P1 is the original pressure, T1 is the original temperature, P2 is the new pressure, and T2 is the new temperature.
Using the values given in the question, we get 1150/75.0 = 760/T2. Solving for T2, we get T2 = 49.6°C. Therefore, the final temperature of the gas is 49.6°C.
Know more about Ideal gas law here
https://brainly.com/question/28257995#
#SPJ11
The heating was stopped before all of the liquid can evaporate how will this affect the results of the experiment
The heating process is often used in experiments to evaporate liquid and concentrate the sample. If the heating was stopped before all of the liquid could evaporate, this would have a significant impact on the results of the experiment.
Firstly, the concentration of the sample would be lower than expected. This could affect the accuracy and precision of any measurements or analyses performed on the sample.
For example, if the sample was being analyzed for the presence of a certain compound, the lower concentration may make it more difficult to detect or quantify the compound accurately.
Additionally, the incomplete evaporation of the liquid could lead to contamination of the sample. If the liquid is not fully evaporated, there may be impurities or other compounds present in the final sample that were not accounted for in the experimental design. This could affect the validity of the results and the interpretation of the data.
In summary, the premature stopping of heating in an experiment could lead to lower sample concentration and potential contamination, both of which could have significant implications for the results and conclusions drawn from the experiment.
To know more about heating process, visit:
https://brainly.com/question/10219607#
#SPJ11
Determine the pressure in atm exerted by 1 mole of methane placed into a bulb with a volume of 244. 6 mL at 25°C. Carry out two calculations: in the first calculation, assume that methane behaves as an ideal gas; in the second calculation, assume that methane behaves as a real gas and obeys the van der Waals equation
When, 1 mole of methane at 25°C in a 244.6 mL bulb would exert a pressure of 2.79 atm assuming it behaves as a real gas and obeys the van der Waals equation.
First, let's calculate the pressure exerted by 1 mole of methane at 25°C assuming it behaves as an ideal gas;
We can use Ideal Gas Law to calculate the pressure;
PV = nRT
where P is pressure, V is volume, n is number of moles, R is gas constant, and T is the temperature in Kelvin.
Converting the volume of the bulb to liters and the temperature to Kelvin;
V = 244.6 mL = 0.2446 L
T = 25°C = 298 K
For 1 mole of methane;
n = 1 mole
The gas constant for the Ideal Gas Law is;
R = 0.0821 L·atm/(mol·K)
Substituting the values into Ideal Gas Law equation;
P = (nRT) / V
P = (1 mole) x (0.0821 L·atm/(mol·K)) x (298 K) / (0.2446 L)
P = 3.24 atm
Therefore, 1 mole of methane at 25°C in a 244.6 mL bulb would exert a pressure of 3.24 atm assuming it behaves as an ideal gas.
Now, let's calculate the pressure exerted by 1 mole of methane at 25°C assuming it behaves as a real gas and obeys the van der Waals equation;
The van der Waals equation is;
(P + a(n/V)²) (V - nb) = nRT
where P is the pressure, V is the volume, n is the number of moles, R is the gas constant, T is the temperature in Kelvin, a is a constant that takes into account the attractive forces between molecules, b is a constant that takes into account the volume of the molecules, and (n/V) is the molar density.
For methane, the values of the van der Waals constants are;
a = 2.253 atm L²/mol
b = 0.0428 L/mol
Substituting the values into the van der Waals equation and solving for P;
P = (nRT / (V - nb)) - (a(n/V)² / V²)
P = (1 mole) x (0.0821 L·atm/(mol·K)) x (298 K) / (0.2446 L - (0.0428 L/mol x 1 mole)) - (2.253 atm L²/mol² / (0.2446 L)²)
P = 2.79 atm
Therefore, the pressure is 2.79 atm.
To know more about van der Waals equation here
https://brainly.com/question/5803619
#SPJ4
dissolving ammonium chloride in water is an endothermic process figure 1 shows the reaction profile for this process (what do I do)
Answer:
When ammonium chloride dissolves in water, the absorption of heat occurs shows the reaction is an endothermic reaction. So, in the endothermic reaction, when the temperature increases, the value of the equilibrium constant also increases.
Explanation:
If we began the experiemtn with 0.70 g of cucl2 x 2 h2o, according to the stoichiometry o the reaction, how much al should be used to complete the reaction withtout either reactant being in excess
0.70 g of CuCl₂ • 2 H₂O reacts completely with 0.48 g of Al. The molar ratio of CuCl₂ • 2 H₂O to Al is 1:2. The reaction completes without any excess reactant.
The balanced chemical equation for the reaction between CuCl₂ • 2 H2O and Al is:
3CuCl₂ • 2 H₂O + 2Al → 3Cu + 2AlCl₃ + 6H₂O
From the equation, we can see that 3 moles of CuCl₂ • 2 H₂O react with 2 moles of Al. We need to find the amount of Al required to react completely with 0.70 g of CuCl₂ • 2 H₂O.
1 mole of CuCl₂ • 2 H₂O has a mass of (63.55 + 2 x 35.45 + 2 x 18.02) g = 170.48 g
0.70 g of CuCl₂ • 2 H₂O is equal to 0.70/170.48 = 0.0041 moles of CuCl₂ • 2 H₂O
From the balanced equation, we can see that 3 moles of CuCl₂ • 2 H₂O react with 2 moles of Al.
Therefore, the moles of Al required is (2/3) x 0.0041 = 0.0027 moles.
The molar mass of Al is 26.98 g/mol. Therefore, the mass of Al required is:
0.0027 moles x 26.98 g/mol = 0.073 g
Therefore, 0.073 g of Al should be used to complete the reaction without either reactant being in excess.
To know more about the molar ratio refer here :
https://brainly.com/question/17920577#
#SPJ11
Complete question :
If we began the experiment with 0.70 g of CuCl₂ • 2 H₂O, according to the stoichiometry of the reaction, how much Al should be used to complete the reaction without either reactant being in excess? Show your calculations.
Why is lead (Pb) able to react with different elements ?
Lead (Pb) is able to react with different elements because it has a relatively low ionization energy, which means that it requires less energy to remove an electron from a lead atom compared to other elements.
Why does lead have low ionization energy?Low ionization energy makes it more likely for lead to form compounds with other elements by giving up electrons or sharing them in covalent bonds. Additionally, lead has a relatively high atomic mass, which makes it more likely to form ionic compounds with lighter elements that have lower atomic masses.
The ability of lead to react with different elements also depends on the specific conditions under which the reaction occurs, such as temperature, pressure, and the presence of other reactants or catalysts.
Find out more on lead here: https://brainly.com/question/18110420
#SPJ1
When read the procedures for this experiment, you find that you will need two burets. What is the purpose of the second buret?
The second buret is used for titrating a standard solution of known concentration against the analyte solution.
The second buret is typically used in titration experiments, where a standard solution of known concentration is used to determine the concentration of an unknown analyte solution. The first buret is filled with the analyte solution, and the second buret is filled with the standard solution. The standard solution is slowly added to the analyte solution until the endpoint of the reaction is reached.
The volume of the standard solution required to reach the endpoint is recorded, and the concentration of the analyte solution can be calculated using stoichiometry and the known concentration of the standard solution. The second buret is essential for accurately measuring the volume of the standard solution added to the analyte solution and ensuring accurate results.
To learn more about analyte solution, here
https://brainly.com/question/31182268
#SPJ4
A sample of hydrogen at 47°C exerts a pressure of 106 kPa. The gas is heated to 77°C
at constant volume. What will its new pressure be? What law will you use?
Answer:
We can use Gay-Lussac's Law to solve this problem, which states that the pressure of a gas is directly proportional to its temperature, provided the volume and the number of moles of the gas are constant.
Using this law, we can write:
P1/T1 = P2/T2
where P1 is the initial pressure, T1 is the initial temperature, P2 is the final pressure, and T2 is the final temperature.
Substituting the given values, we get:
P1 = 106 kPa
T1 = 47°C + 273.15 = 320.15 K
T2 = 77°C + 273.15 = 350.15 K
So, P2/T2 = P1/T1
P2 = P1 × (T2 / T1)
P2 = 106 kPa × (350.15 K / 320.15 K) = 115.44 kPa
Therefore, the new pressure of the hydrogen gas will be 115.44 kPa when it is heated to 77°C at constant volume.
please vote brainliest, have a great day :)
What is the coefficient in front of Cl₂, when this equation is balanced?
Zn +_Cl₂ → ZnCl₂
The coefficient in front of Cl₂ is 1, wen the equation is balanced
How to find the coefficientThe balanced chemical equation for the reaction between Zinc and Chlorine gas is:
Zn + Cl₂ → ZnCl₂
To balance this equation, we need to make sure that the number of atoms of each element is equal on both the reactant and product side of the equation.
In this case, there is one Zinc atom and two Chlorine atoms on the reactant side, and one Zinc atom and two Chlorine atoms on the product side. So, the equation is already balanced.
Learn more about balanced equation at:
https://brainly.com/question/11904811
#SPJ1
Determine the concentration of 24.5 grams of cesium hydroxide in 100.0 mL of water.
Answer:
This data gives a relationship between amount of solute and volume of solution: 5.67 g KCl /. 100.0 mL. To find molarity we must convert grams KCl to moles hope this helps
Explanation:
In this last step, return to Step 10 in your Lab Guide to calculate the error between your calculated specific heat of
each metal and the known values in Table C. Follow the directions given in your Lab Guide, using this formula:
(calculated metal - known (metal)
Error = 100
known Cmetal
To calculate the error between your calculated specific heat of each metal and the known values in Table C, you should use the following formula: Error = ((calculated specific heat of metal - known specific heat of metal) / known specific heat of metal) * 100.
In the last step of the lab, you need to calculate the error between your calculated specific heat of each metal and the known values in Table C. To do this, you will return to Step 10 in your Lab Guide and follow the directions provided. The formula you will use is:
Error = (calculated metal - known metal) / (known Cmetal) x 100
This formula will give you the percentage error between your calculated values and the known values in Table C. To calculate the error for each metal, simply plug in the values for the specific heat you calculated and the known value for that metal from Table C. Make sure to follow the directions carefully in your Lab Guide to ensure accurate calculations.
Learn more about specific heat at https://brainly.com/question/30403247
#SPJ11
Silo measure d 640 grams of sulphur which occupies 540ml of container at 47 degree celsius.find the pressure of the gas.
The pressure of the gas is 76.8 atm.
The pressure of the gas can be calculated using the ideal gas law formula:
PV = nRT
where P is the pressure, V is the volume, n is the number of moles, R is the gas constant, and T is the temperature in Kelvin.
First, we need to calculate the number of moles of sulfur:
molar mass of sulfur = 32 g/mol
number of moles = mass/molar mass
= 640 g/32 g/mol
= 20 mol
Next, we need to convert the volume from milliliters to liters and the temperature from Celsius to Kelvin:
V = 540 ml = 0.54 L
T = 47°C + 273.15 = 320.15 K
Finally, we can plug in the values and solve for pressure
P = nRT/V
= 20 mol x 0.08206 L atm mol⁻¹ K⁻¹ x 320.15 K / 0.54 L
= 76.8 atm
To know more about ideal gas law, refer here:
https://brainly.com/question/28257995#
#SPJ11
CH3COOC5H11 Draw this structure it is an ester
CH₃COOC₅H₁₁ is the chemical formula for an ester. The structure of CH₃COOC₅H₁₁ is attached.
Esters are organic compounds that are formed from a reaction between a carboxylic acid and an alcohol. The ester formed from the reaction between acetic acid (CH₃COOH) and pentanol (C₅H₁₁OH) is CH₃COOC₅H₁₁.
The ester has a carbonyl group, which is a carbon atom double-bonded to an oxygen atom, that is located in the middle of the molecule. The carbonyl group is attached to an acetyl group (CH₃CO), which is a combination of a methyl group (CH₃) and a carbonyl group. The other end of the molecule is attached to a pentyl group (C₅H₁₁), which is a chain of five carbon atoms with eleven hydrogen atoms attached.
Esters are commonly used as fragrances and flavorings, and can be found in a variety of fruits and flowers. They also have many industrial applications, such as in the production of plastics, resins, and solvents.
To know more about ester here
https://brainly.com/question/31827356
#SPJ1
Sort the disciptions of open clusters and globular clusters into the correct categories
Open clusters:
Found in the disk of the galaxyYoung starsFew hundred to a few thousand starsLoosely bound by gravityIrregular shapeGlobular clusters:
Found in the halo of the galaxyOld starsTens of thousands to millions of starsTightly bound by gravitySpherical shapeWhat are clusters?Clusters are collections of stars that are gravitationally connected to one another and close to one another in astronomy. Open clusters and globular clusters are the two basic categories into which they can be separated.
While globular clusters are collections of much older stars that are tightly bound together into a spherical shape, open clusters are collections of much younger stars that are relatively loosely bound together.
Find out more on open clusters here: https://brainly.com/question/15222665
#SPJ1
Question 25 of 25
what is indicated by the prefixes cis-and trans-?
a. the size of the molecule
b. the location of the methyl group
c. the type of stereoisomer
d. the type of alkane
The prefixes cis- and trans- are used to describe stereoisomers, which are molecules that have the same molecular formula and connectivity but differ in their spatial arrangement. The correct answer is option c.
Specifically, they are used to describe molecules that have a carbon-carbon double bond or a ring structure.
Cis- and trans- indicate the type of stereoisomer, specifically geometric isomers. Cis- is used to describe molecules in which the two groups attached to the carbons of the double bond are on the same side, while trans- is used to describe molecules in which the two groups are on opposite sides of the double bond.
For example, in the molecule [tex]2-butene[/tex], there are two possible arrangements of the methyl ([tex]CH3[/tex]) and hydrogen (H) groups around the carbon-carbon double bond. If the two methyl groups are on the same side of the double bond, the molecule is called [tex]cis-2-butene[/tex]. If the two methyl groups are on opposite sides of the double bond, the molecule is called [tex]trans-2-butene[/tex].
The correct answer is option c.
To know more about stereoisomer refer to-
https://brainly.com/question/31147524
#SPJ11
The following reaction is done at stp:
n2 (g) + 3 h 2 (g) à 2 nh 3 (g)
if i.5 l of nitrogen gas are added to an excess of hydrogen gas, how many liters of nh3 gas will form?
At STP, 1.5 L of nitrogen gas will produce 3 L of NH₃ gas.
The balanced chemical equation for the reaction is N₂(g) + 3H₂(g) --> 2NH₃(g). According to the stoichiometry, 1 mole of nitrogen gas (N₂) reacts with 3 moles of hydrogen gas (H₂) to produce 2 moles of ammonia gas (NH₃). At STP, the volume of one mole of any gas is 22.4 L.
Step 1: Calculate the moles of N₂ in 1.5 L.
Moles of N₂ = (Volume of N₂ / 22.4 L/mol) = 1.5 L / 22.4 L/mol = 0.067 moles.
Step 2: Use the stoichiometry to find the moles of NH₃ formed.
Moles of NH₃ = 2 * Moles of N₂ = 2 * 0.067 moles = 0.134 moles.
Step 3: Calculate the volume of NH₃ formed at STP.
Volume of NH₃ = (Moles of NH₃ * 22.4 L/mol) = 0.134 moles * 22.4 L/mol = 3 L.
To know more about balanced chemical equation click on below link:
https://brainly.com/question/28294176#
#SPJ11
Of the following compounds, which is the most ionic? A) SiCl4 B) BrCl C)PCl3 D) Cl2O E) CaCl
Put these atoms in order from most positive overall charge to least positive overall charge.
Atom B: 24 protons, 19 electrons
Atom A: 14 protons, 16 electrons
Atom R: 26 protons, 24 electrons
Atom P: 8 protons, 11 electrons PLEASE HELP FAST
Which part of the decay will take the most time?
the decay of U-238 to Th-234
the decay of Th-234 to Ra-226
the decay of Ra-226 to Po-214
the decay of Po-214 to Pb-206
The decay process of each isotope depends on their half-lives. The half-life is the amount of time required for half of the initial sample to decay.
U-238 has a half-life of 4.5 billion years, which means it takes billions of years for half of the U-238 to decay. Th-234 has a half-life of 24 days, which is relatively short compared to U-238. Ra-226 has a half-life of 1,600 years, which is shorter than U-238 but longer than Th-234. Po-214 has a half-life of 164 microseconds, which is incredibly short compared to the other isotopes. Pb-206 is a stable isotope, which means it does not undergo radioactive decay.
Therefore, the decay of Po-214 to Pb-206 is the fastest decay process of the four isotopes mentioned above, and the decay of U-238 to Th-234 is the slowest. The decay of Th-234 to Ra-226 and Ra-226 to Po-214 are intermediate decay processes.
To know more about isotope refer here
https://brainly.com/question/12955625#
#SPJ11
12. Lab Analysis: You forgot to label your chemicals and do not know whether your unknown solution is strontium nitrate or magnesium nitrate. You use the solutions potassium carbonate and potassium sulfate in order to determine your mistake. unknown + potassium carbonate & unknown + potassium sulfate . What do you observe when the unknown solution is mixed with potassium carbonate? (Can you see the shape underneath?)
By observing whether a white precipitate forms or not, you can determine whether the unknown solution is strontium nitrate or magnesium nitrate.
What happens when unknown solution is mixed?When the unknown solution is mixed with potassium carbonate, one of two things can happen, depending on whether the unknown solution is strontium nitrate or magnesium nitrate.
If the unknown solution is strontium nitrate, then when mixed with potassium carbonate, a white precipitate of strontium carbonate will be formed. The balanced chemical equation for this reaction is:
Sr(NO3)2 + K2CO3 -> SrCO3 + 2KNO3
If the unknown solution is magnesium nitrate, then when mixed with potassium carbonate, no visible reaction will occur. Magnesium carbonate is insoluble in water and does not precipitate out. The balanced chemical equation for this reaction is:
Mg(NO3)2 + K2CO3 -> no visible reaction
Learn more about potassium carbonate here: https://brainly.com/question/29595625
#SPJ1
ENDOTHERMIC
During this chemical reaction energy is absorbed. In the chemistry lab, this would be indicated by a decrease in temperature or if the reaction took place in a test tube, the test tube would feel colder to the touch. Reactions like this one absorb energy because
The reactants have less potential energy than the products
In chemistry, a chemical reaction can be classified as either endothermic or exothermic based on whether the reaction releases or absorbs energy, respectively. An endothermic reaction is one in which energy is absorbed from the surroundings, resulting in an increase in the internal energy of the system.
The term potential energy refers to the stored energy within a system due to the position or configuration of the particles that make up that system. In the case of a chemical reaction, potential energy is stored within the chemical bonds between atoms and molecules.
In an endothermic reaction, the reactants have less potential energy than the products. This is because energy is required to break the chemical bonds in the reactants, which absorbs energy from the surroundings. As a result, the products have higher potential energy than the reactants because they have absorbed energy from the surroundings during the reaction.
Examples of endothermic reactions include the process of melting ice, where energy is absorbed from the surroundings to break the bonds between water molecules, and the reaction between baking soda and vinegar, where energy is absorbed to break the bonds between the molecules of the reactants.
In summary, endothermic reactions are those that require energy to be absorbed from the surroundings. This results in the products of the reaction having more potential energy than the reactants, which have had their bonds broken and therefore have less potential energy.
To know more about endothermic refer here
https://brainly.com/question/23184814#
#SPJ11
why does the pinacol rearrangement more often use sulfuric acid, h 2 s o 4 , as the acid catalyst rather than hydrochloric acid, h c l ?
The pinacol rearrangement more often use the sulfuric acid, H₂SO₄ , as the acid catalyst rather than the hydrochloric acid, HCl is because H₂SO₄ have the more proton than that of the HCl.
The pinacol rearrangement process will takes place through 1,2-rearrangement. This rearrangement will involves the shift of the two adjacent atoms. Pinacol is the compound which has the two hydroxyl groups, each of the attached to the vicinal carbon atom. It is the solid organic compound which is the white.
The H₂SO₄ have the more proton than that of the HCl. This will makes the pinacol rearrangement more often use the sulfuric acid H₂SO₄ , as the acid catalyst and rather than the hydrochloric acid, HCl.
To learn more about pinacol rearrangement here
https://brainly.com/question/29523437
#SPJ4
How will this investigation explain joe's 2kg barbell that was left under the sun for about 30 minutes was so much hotter than his 10 kg barbell that was left in the sun for the same amount of time?
This investigation will explain why Joe's 2kg barbell was much hotter than his 10kg barbell after being left in the sun for the same amount of time. Heat is transferred through a process called conduction, which is the direct transfer of thermal energy between two objects in contact. This process is directly proportional to the thermal conductivity of the material and the surface area between the two objects.
Since Joe's 2kg barbell has a smaller surface area than his 10kg barbell, it will experience more heat transfer in a given time period, making it hotter than the 10kg barbell.
Additionally, certain materials have higher thermal conductivities than others, meaning they can transfer heat more quickly. Thus, the material of both barbells could also have a significant effect on the amount of heat transferred to each.
Ultimately, this investigation will explain why Joe's 2kg barbell became hotter than his 10kg barbell in a similar time period, based on their respective surface areas and the materials of which they are made.
Know more about Thermal energy here
https://brainly.com/question/18989562#
#SPJ11
A sealed 10. 0L flask at 400K contains equimolar amounts of ethane and propane in gaseous form
The partial pressure of ethane and propane in the flask are both 16.42 atm.
The given information tells us that the flask is sealed, which means that no gas can enter or leave the flask. It also tells us that the volume of the flask is 10.0L and the temperature is 400K. Finally, it tells us that there are equimolar amounts of ethane and propane in the flask.
From this information, we can assume that the total pressure inside the flask is the sum of the partial pressures of ethane and propane. This is because the ideal gas law tells us that PV = nRT, where P is pressure, V is volume, n is the number of moles of gas, R is the gas constant, and T is the temperature. Since the number of moles of each gas is the same, we can assume that their partial pressures are equal.
To find the partial pressures, we need to use the ideal gas law again. However, we need to know the total number of moles of gas in the flask. We can find this by using the fact that the amounts of ethane and propane are equimolar. Since the molar mass of ethane is 30 g/mol and the molar mass of propane is 44 g/mol, we know that the total mass of gas in the flask is 74 g. Dividing this by the sum of the molar masses (30+44=74 g/mol), we get the total number of moles, which is 1 mol.
Now we can use the ideal gas law to find the partial pressures. We'll use R = 0.08206 L·atm/(mol·K) as the gas constant. For ethane, we have:
PV = nRT
P_ethane * 10.0L = 0.5 mol * 0.08206 L·atm/(mol·K) * 400K
P_ethane = (0.5 mol * 0.08206 L·atm/(mol·K) * 400K) / 10.0L
P_ethane = 16.42 atm
For propane, we get the same result:
PV = nRT
P_propane * 10.0L = 0.5 mol * 0.08206 L·atm/(mol·K) * 400K
P_propane = (0.5 mol * 0.08206 L·atm/(mol·K) * 400K) / 10.0L
P_propane = 16.42 atm
Therefore, the partial pressure of ethane and propane in the flask are both 16.42 atm.
Know more about Partial Pressure here:
https://brainly.com/question/31214700
#SPJ11
How many grams of CaCl2 would be required to produce a. 750 M solution with a 855 ml volume?
8.32 grams of CaCl2 are required to produce 750 ml of a 0.100 M CaCl2 solution.
The number of moles of solute that can dissolve in 1 L of a solution is known as molarity or molar concentration.
Volume of solution (in litres) / Number of solutes (in moles), or
C = n / V
According to the question,
V = 750 ml and C = 0.100 M
Let's convert millilitres to litres for this.
We know 1 L = 1000 ml
Consequently, 750 ml equals (750/1000) L, or 0.75 L.
So, V = 0.75 L
We know that C = n / V
So, n = C x V
n = 0.100 x 0.75 = 0.075
The solute contains n moles in total.
CaCl2 thus has a mole count of 0.075 moles.
In 750 ml of solution, this demonstrates that there are 0.075 moles of CaCl2.
We must know the molar mass of CaCl2 in order to calculate the mass of CaCl2 in grams.
To do this, we must use the periodic table to determine the atomic masses of each atom.
CaCl2 consists of 1 Ca and 2 Cl atoms.
Atomic mass of Ca is 40.08 g and that of Cl is 35.45, so 2 x 35.45 = 70.90 g.
We obtain the mass of CaCl2 in grams by averaging these measurements.
Hence, mass of CaCl2 = 40.08 + 70.90 = 110.98 g
Thus, 110.98 g equals 1 mole of CaCl2.
Therefore, 0.075 moles of CaCl2 will weigh 8.3235 g, which is rounded to 8.32 g, or 0.075 x 110.98 g.
To know about volume
https://brainly.com/question/14710169
#SPJ4
The complete question is
How many grams of calcium chloride will be needed to make 750 mL of a 0.100 M CaCl2 solution?
Elementary analysis showered that an organic compound contained c, h, n and o as the only elementary constituent. a 1.279g sample was burnt completely as a result of which 1.6g of co2, 0.77g of h2o were obtained. a separately weighted of nitrogen. what is the empirical formula of the compound?
The empirical formula of the compound is C₂H₆O₂N.
To determine the empirical formula, we need to find the mole ratios of the elements in the compound. First, we can calculate the moles of CO₂ and H₂O produced from the combustion reaction:
moles of CO₂ = 1.6 g / 44.01 g/mol = 0.0364 mol
moles of H₂O = 0.77 g / 18.015 g/mol = 0.0428 mol
Next, we can calculate the moles of C, H, and O in the original sample using the mass balance:
moles of C = moles of CO₂ = 0.0364 mol
moles of H = (moles of H₂O) x (2 H atoms per molecule) = 0.0856 mol
moles of O = (moles of CO₂) x (2 O atoms per molecule) = 0.0728 mol
Finally, we can calculate the moles of N using the separate measurement:
moles of N = 0.0403 g / 14.01 g/mol = 0.00287 mol
To get the empirical formula, we need to find the smallest whole number ratio of the elements. Dividing each of the moles by the smallest value (0.00287 mol) gives:
C = 12.64 / 0.00287 = 4.39 ≈ 4
H = 17.13 / 0.00287 = 5.96 ≈ 6
O = 25.38 / 0.00287 = 8.83 ≈ 9
N = 0.00287 / 0.00287 = 1
So the empirical formula is C₂H₆O₂N, which has a molar mass of 90.09 g/mol. However, this is only the empirical formula and not the molecular formula, which could be a multiple of the empirical formula.
Further analysis would be needed to determine the molecular formula of the compound.
To know more about empirical formula, refer here:
https://brainly.com/question/14044066#
#SPJ11
If 3grams of sodium reacts with 25 grams of sulfuric acid to form sodium sulfate and 1 gram of hydrogen and no sodium is left after the reaction but 9grams of acid remained unreacted how many grams of sodium sulfate were formed
The balanced chemical equation for the reaction between sodium and sulfuric acid to form sodium sulfate and hydrogen gas is:
2Na + H2SO4 -> Na2SO4 + 2H2
From the given information, we can see that the reaction is limited by the amount of sodium available, since all of the sodium is used up in the reaction.
Therefore, we can use the amount of sodium to determine the amount of sulfuric acid that reacted and the amount of sodium sulfate that was formed.
1. Calculate the amount of sulfuric acid that reacted:
m(Sulfuric acid) = 25 g - 9 g = 16 g
n(Sulfuric acid) = m(Sulfuric acid) / M(Sulfuric acid) = 16 g / 98.08 g/mol = 0.163 mol
2. Calculate the amount of sodium sulfate formed:
Since the mole ratio of Na to Na2SO4 is 2:1, the number of moles of sodium used is:
n(Na) = m(Na) / M(Na) = 3 g / 22.99 g/mol = 0.1305 mol
The amount of sodium sulfate formed is also 0.1305 mol, since the mole ratio of Na to Na2SO4 is 2:1.
m(Na2SO4) = n(Na2SO4) x M(Na2SO4) = 0.1305 mol x 142.04 g/mol = 18.54 g
Therefore, 18.54 grams of sodium sulfate were formed in the reaction.
To know more about hydrogen refer here
https://brainly.com/question/31018544#
#SPJ11
Predict the phenotypic and genotypic outcome (offspring) of a cross betweenn
two plants heterozygous for round peas
The predicted phenotypic outcome of this cross will be that 75% of the offspring will have a round phenotype, while 25% will have a wrinkled phenotype.
To predict the phenotypic and genotypic outcome of a cross between two plants heterozygous for round peas, we need to first understand the genetics involved.
Round peas are dominant over wrinkled peas, which means that the genotype for round peas can be either homozygous dominant (RR) or heterozygous (Rr), while the genotype for wrinkled peas is homozygous recessive (rr).
When two plants heterozygous for round peas are crossed (Rr x Rr), there are three possible genotypic outcomes for their offspring: RR, Rr, or rr. However, because round peas are dominant, any offspring with at least one R allele (RR or Rr) will have a round phenotype.
Therefore, the predicted phenotypic outcome of this cross will be that 75% of the offspring will have a round phenotype, while 25% will have a wrinkled phenotype. The predicted genotypic outcome will be that 25% of the offspring will be homozygous dominant (RR), 50% will be heterozygous (Rr), and 25% will be homozygous recessive (rr).
To know more about phenotype, visit:
https://brainly.com/question/20730322#
#SPJ11
What is the mass of a sample of NH3 containing 3. 80 × 10^24 molecules of NH3?
The mass of a sample of NH₃ containing 3.80 × 10²⁴ molecules of NH₃ is the product of the number of moles and the molar mass of NH₃.
To find the mass of a sample of NH₃ containing 3.80 × 10²⁴ molecules of NH₃.
Step 1: Determine the number of moles of NH₃
We know that there are 6.022 × 10²³ molecules in one mole of any substance (Avogadro's number). To find the number of moles of NH₃, divide the given number of molecules by Avogadro's number:
Number of moles = (3.80 × 10²⁴ molecules) / (6.022 × 10²³ molecules/mol)
Step 2: Calculate the molar mass of NH₃
NH₃ consists of one nitrogen (N) atom and three hydrogen (H) atoms. The atomic mass of nitrogen is approximately 14 g/mol, and the atomic mass of hydrogen is approximately 1 g/mol. So the molar mass of NH₃ is:
Molar mass of NH₃= (1 × 14 g/mol) + (3 × 1 g/mol) = 14 + 3 = 17 g/mol
Step 3: Find the mass of the sample
Now that we know the number of moles and the molar mass, we can find the mass of the sample by multiplying the two values:
Mass of the sample = Number of moles × Molar mass of NH₃
The mass of a sample of NH₃ containing 3.80 × 10²⁴ molecules of NH₃ is the product of the number of moles (calculated in step 1) and the molar mass of NH₃ (calculated in step 2).
To know more about molar mass :
https://brainly.com/question/20552052
#SPJ11